Search Results

Search found 8950 results on 358 pages for 'eee pc 1000he'.

Page 247/358 | < Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >

• Outlook 2010 - Downloads same messages multiple times when opening

  - by AaronM

  I run multiple POP mailboxes, and have the 'Leave copy of messages on server' set for 20 days. I have been working like this for several years. However, I have just this week upgraded to Outlook 2010, and for some reason a couple of the mailboxes are downloading all the messages again, each time I open outlook. I have gone through all the settings but I can't see anything obvious, and apart from the upgrade to 2010, I havent touched any settings (2010 imported everything from 2007). I use webmail when away from my PC, hence why I leave a copy of emails on the server. Any ideas? It only downloads when Outlook first opens, thankfully not every time I do a send/receive.

  Read the article

• Need hard disk recommendation for linux home server.

  - by neotracker

  Hello, I'm planing to build a little linux homeserver. It will mainly be used for storage and maybe as an media pc. I plan to build a software raid5 with 4 1.5TB or 2TB hard drives. I already decided to use the Western Digital Caviar Green 1.5 TB drive, but then I read about some problems with the WD green series about many drives failing and that they are not recommended for raid anyway. Of course, I couldn't find much facts on the issues so I thought I just ask here ;-) What hard drives would you recommended for a software raid5 setup? As I only need it for storage, the whole thing doesn't have to be too fast. So I prefer a cheap price and silence to great performance.

  Read the article

• Finding, which web component is causing problems during page loading

  - by Juhele

  I am using windows version of Firefox 5.0 and last few days I found that on one website (similar focus as stackexchange but in Czech), is something wrong as my browser loads it very slowly (while the connection is ok and never had problems with it). There is also another guy trying to solve the almost the same problem, but no help yet. So I would ask, whether there is some Firefox plugin showing which page components are loading and which could help me to find out the problem. I am writing from office pc so we have blocked all the social networks like FB, Twitter etc. and I also use Adblock Plus - however, deactivating it does not have any effect on it. thanks

  Read the article

• ACHI drivers for W8.1 with amd

  - by LeiNaD_87

  I hope you can help me... I just installed a SSD (Samsung EVO 840) and windows 8.1 pro in my pc with M5A99X EVO ( chipset AMD 990X/SB950 ) motherboard. The SSD is installed in sata3 socket using a sata3 wire. The AHCI mode is ON in the bios. I configured the ahci controller and now device administrator looks like this: All works, but the speed of the SDD is very slow (like a HDD). Samsung magician doesn't recognize the sata mode neither the ahci. I tried to install more drivers but the system broke and I need to reinstall windows :( I tried many things from the web, but any works: Modify windows registy Use compatibility mode Modify the amd drivers and install it unsigned Thank you for your time!! EDIT to add a CrystalDiskMark benchmark

  Read the article

• 4K sectors transition: Why are hard drives moving to 4096 byte sectors, vs. 512 byte sectors?

  - by Chris W. Rea

  I've noticed that some Western Digital hard drives are now sporting 4K sectors, that is, the sectors are larger: 4096 bytes vs. the long-standing standard of 512 bytes. So: What's the big deal with 4K sectors? Is it marketing hype, or a real advantage? Why should somebody building a new PC care, or not, about 4K sectors? Why is this transition taking place now? Why didn't it happen sooner? Are there things to look out for when buying a 4K sector hard drive? e.g. incompatibility? Anything else we should know about 4K sectors?

  Read the article

• windows 7 is not working with Ubuntu 12.04

  - by Anand Soni

  I have one problem, I am unable to start windows 7 which is installed with Ubuntu 12.04 because I want to utilize all resource in diff. OS. Let me tell you the installation I have done. I have installed everything with USB because my CD ROM is damaged. 1) I have installed Windows 7 in c: then I have installed Ubuntu 12.04 in C: Now when I start my PC it shows list of OS first like -Ubuntu 12.04 -Windows 7 When I click on Windows 7 it do not starts and again shows the list of OS. I have also tried to reinstall the windows 7 using USB but it gives error of something UI or Boot configuration error. Even now Ubuntu 12.04 is also not reinstalling. Now what I want to do is install windows 7 and install ubuntu 12.04 in virtual box so that I can run both system as this is not working. But can't because I can't open Window 7 even can't format my drive. Please suggest something.

  Read the article

• What to do if people can't ping me?

  - by slayerIQ

  Today, I installed my new router so I can connect my other pc and my ps3. In my network, there are some other computers these are connected with each other through another router. So I have one modem with 2 routers that make up my network. Everything works fine the only problem I am having is being pinged by other computers in the network. All the computers are on the same subnet 255.255.255.0. There is no problem with my firewall or anything I tested everything. How can I solve this?

  Read the article

• Does disabling BIOS shadowing increase free RAM space?

  - by user32569

  Hi, I know in these days this is very stupid question, but for study purposes. I read that when PC starts, CPU is set to read adress just under the 4GB. There should BIOS be mapped to by memory controller. My question is, in old days, had disabling BIOS shadowing actually freed some RAM for you? I mean, even when BIOS was not shadowed to RAM directly, still adresses for BIOS MMIO access were wasted. And when you cant adress it, its like there is no extra space gained.

  Read the article

• Remote execution in Workgroup network

  - by ayyob khademi

  Consider this scenario: Please don't say that it would be better if I created a Domain network; Just consider this scenario. 10 PCs are all interconnected via a switch to a workgroup network named WORKGROUP; PCs specs(all are the same): Windows XP SP2 en (build:2600.xpsp_sp2_rtm.040803-2158) I have full physical control over my own PC (one of those 10 PCs) and what I know about the other ones: IPs of all 10 PCs. Administrator account name of all 10 PCs. Administrator account password of all 10 PCs. How can I execute an application on the other PCs???(without touching them) How can modify their registry settings???(without touching them)

  Read the article

• "ant" is not recognized as command in Windows

  - by user1294663

  This is my first time developing Android applications. I'm developing an Android app on Eclipse on Windows 7. I would like to run the Android app from the Windows 7 command line interface. I have my Android device connected to the PC. The workspace directory that I use to store the Android project is C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I opened the command line interface and I changed the working directory to the Android workspace directory. cd C:\Users\Guest\Desktop\Software Applications Development\Java\Android Moblie Applications Projects\Eclipse Indigo for Java EE x64-bit\project workspace I included Android sdk platform tools directory into the PATH environment variable. c:\Users\admin\Android-sdks\platform-tools Then I entered this into the Windows 7 command line interface: ant debug I have this error message on the cmd: ant is not recognised as an internal or external command, operatable program or batch file. What is the solution to this problem?

  Read the article

• Building a Server at Home

  - by madhairsilence

  Am left with a Spare PC . So , I thought of converting it to a Server kind of thing. I read about NAS Serer for simple file storage. But it is just a file server. I also play games like counter strike and other online games. So, I would like to use the same server for those purpose., so that a game server will running all the time so that me and my friends can join any time. Is running NAS server a best option or, is there any better arrangement possible so that my spare system can act better than a simple file server

  Read the article

• Iptables REDIRECT + openvpn problem

  - by Emilio

  I want to redirect connection to port 22 to my openvpn binded port, on 60001. Openvpn is running on server on 60001 server:~$ sudo netstat -apn | grep openvpn udp 0 0 67.xx.xx.137:60001 0.0.0.0:* 4301/openvpn I redirect on server port 22 to 60001 server:~$ sudo iptables -F -t nat server:~$ sudo iptables -A PREROUTING -t nat -p udp --dport 22 -j REDIRECT --to-ports 60001 I start openvpn client (openvpn.conf is correct, it works with remote IP 22 replaced with remote IP 60001) client:~$ ./openvpn openvpn.conf Tue Apr 27 00:42:50 2010 OpenVPN 2.1.1 i686-pc-linux-gnu [SSL] [EPOLL] built on Mar 23 2010 Tue Apr 27 00:42:50 2010 UDPv4 link local (bound): [undef]:1194 Tue Apr 27 00:42:50 2010 UDPv4 link remote: 67.xx.xx.137:22 Tue Apr 27 00:42:52 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) Tue Apr 27 00:42:55 2010 read UDPv4 [ECONNREFUSED]: Connection refused (code=111) ... It doesn't connect. iptables shows requests from client to server but no answers. What's wrong with it?

  Read the article

• Is it possible to use two separate USB tuners with Windows Media Center?

  - by Lunatik

  I'm planning to replace my traditional PC-style media center (with twin tuners) with an Asrock Ion 3D (or similar) but this means forgoing my existing PCI-E dual tuner card for a USB solution. Since Freeview HD (using DVB-T2) is now available I'd like to equip my media center to take advantage. The trouble is there are currently no dual DVB-T2 USB tuners on the market (that I can find anyway). Would I be able to plug two separate USB tuners and have them correctly picked up and working within all apps, including Windows Media Center? Are there any caveats I might need to bear in mind when using two tuners in this way?

  Read the article

• cannot access my own computer through My Network Places

  - by WebMAOhist

  My home Windows XP Pro SP3 machine is DHCP client receiving configurations from ISP. Trying to access in WindowsExplorer -My Network Places - Microsoft Windows Network shows Workgroup with a delay of 3 min and then popups messagebox: Microsoft Windows Network Workgroup is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.The list of servers for this workgroup is not currently available OK I am logged-in as local machine Administrator. The internet is accessible (I am writing this post through it) The Firewall is disabled The "Computer Bowser" and all networking services, I could find, are running Control Panel -- Network Connections -- Properties (of connection) --- Internet Protocol (TCP/IP), btn Properties --- --- tab General, btn "Advanced..." -- tab WINS-- rbtn "Enable NetBIOS over TCP/IP" checked Why cannot I access my own PC (and shares on it) through My Network Places What is the possible problem? How to daignose the problem?

  Read the article

• Google and Gmail only work on one laptop and not the other two

  - by Becca

  We have Comcast internet and everything was fine until recently. I am currently using my father-in-law's PC, and Gmail, Paypal, and Google all work fine. They don't work on my laptop or my husband's. We've reset the router/modem several times and nothing works. So we unplugged the main line outside and it fixed it for two weeks but now it's back to being stupid again. We've tried everything else and nothing seems to work. Any ideas?

  Read the article

• multicast and iptables

  - by Massimo

  I have secured a linux box, starting with iptables -P INPUT DROP iptables -P OUTPUT DROP iptables -P FORWARD DROP and after adding rules to enable specific protocols and streams. Which are the correct rules to add multicast support ? I am trying with these - for both client and server multicast : iptables -A INPUT -m pkttype --pkt-type multicast -j ACCEPT iptables -A OUTPUT -m pkttype --pkt-type multicast -j ACCEPT iptables -A INPUT --protocol igmp -j ACCEPT iptables -A OUTPUT --protocol igmp -j ACCEPT iptables -A INPUT --dst "224.0.0.0/4" -j ACCEPT iptables -A OUTPUT --dst "224.0.0.0/4" -j ACCEPT Linux 2.6.38-12 / iptables 1.4.10 Is there any internet service to test my multicast set ( pc + adsl router + provider ) ?

  Read the article

• Two domains hosted on the same server with different root folder shows up the same homepage

  - by emaillenin

  I have hosted two domains from GoDaddy at Linode VPS. They are mobiletoast.com and lesseltechnologies.com Thought the latter site has a separate index folder, whenever I navigate to it, I get the homepage of mobiletoast.com The strange thing is, I see the expected page (It works), when I open the site from my mobile phone. But when I open the site from my PC (any browser, without any cache, hard refresh), I get the homepage of mobiletoast.com The Linode support team says, they see the correct "It works" page. But I am not able to see that page. This is the output of the command apache2ctl -S root@li339-83:~# apache2ctl -S VirtualHost configuration: wildcard NameVirtualHosts and _default_ servers: *:80 is a NameVirtualHost default server mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/000-default:1) port 80 namevhost blog.mobiletoast.com (/etc/apache2/sites-enabled/blog.mobiletoast.com:1) port 80 namevhost lesseltechnologies.com (/etc/apache2/sites-enabled/lesseltechnologies.com:1) port 80 namevhost mobiletoast.com (/etc/apache2/sites-enabled/mobiletoast.com:1) Syntax OK

  Read the article

• What is fastest way to backup a disk image over LAN?

  - by David Balažic

  Sometimes I boot sysrescd or a similar live linux on a PC to backup the hardrive over local network to my server. I noticed many times, that the transfer speed is not optimal (slower than HDD and network speed). Any rules of thumb what to do and what to avoid? What I typically do is something like: dd bs=16M if=/dev/sda | nc ... # on client nc ... | dd bs=16M of=/destination/disk/backup1 # on server I also "throw" in lzop (other are way too slow) and sometimes on the fly md5sum calculation (both of uncompressed and compress source). I try to add (m)buffer (or other alternatives) to improve throughput (and get a progress indicator). I noticed that even with enough free CPU, adding commands to the pipeline slows things down. Typically the destination is on a NTFS volume (accessed via ntfs-3g, with the _big_writes_ option).

  Read the article

• Changing wallpaper depending on time of day via script or batch file?

  - by Patrick

  I want to have 2 different wallpapers that change according to time of day (6 and 22 hours respectively) and only want to display the night one after 22 hours and the day one only after 6 hours and until 22 hours. I didn't find a program that can do this after a standby, so I thought it should be easy to realize with the task scheduler running a script. Now the question is not only how to realize such a script, but also if the script should include the time checking or the task scheduler. I'm not sure what would work better with long times of the PC being in standby. I tried a few scripts already from similar questions and hoped I could modify to them to my needs, but they didn't work at all. Anyone able to help me? TIA.

  Read the article

• Sonicwall Global VPN Client fails to connect, despite successful connections from other computers from behind the same router

  - by JesperE

  I've recently been unable to connect to our Sonicwall VPN at work. The Sonicwall client is stuck on "connecting", and the log says "The peer is not responding to phase1 ISAKMP requests". The weird thing is that this is not an issue with my own PC, only my work laptop (Lenovo W530 running Windows 7 64-bit), and this has only appeared recently. This ought to rule out any problems with my ISP blocking VPN, or issues with the router itself. My company's IT department says that they cannot see anything in their logs when I'm trying to connect. My conclusion is that something is wrong on the laptop itself. Disabling the firewall does not help. Can the VPN connection be blocked in other ways? What should I be looking for? EDIT: This problem has "magically" disappeared, without any changes done in my network. I can only assume that this was caused by some network glitch with my ISP.

  Read the article

• How to restore default iPod playlists on Amarok?

  - by obvio171

  I wanted to "reset" the collection on my iPod and ended up accidentally deleting, through Amarok, all the playlists, including the default ones like "Most Played" and "Highest Rated". Since these are dynamic playlists with a special meaning for iPod, I don't think creating new, normal playlists with the same name will bring their special behavior back. How do I restore them with the same dynamic functionality? Is there a way to do that on Amarok? Rhythmbox? GTKPod? Command line? P.S.: not entirely sure what the policy about iPod questions are, but this one in particular seems to me to be very computer-related because, although it's about interfacing with a device, everything has to be done on my computer, using standard PC libraries/programs, etc. If it's still off-topic, please point me to where I could post it.

  Read the article

• Windows XP - non-user input data filter message after installing wireless keyboard & mouse

  - by James

  After I installed MS wireless keyboard and mouse and associated software, I started getting this annoying message titled "Hardware installation" telling me the software I am trying to install did not pass the XP logo tests. The software is for "HID non-user input data filter" and I have two options Continue anyway or stop installation. Now, if I try to continue the installation fails, if stop installing another message pops up with a little mouse logo and the whole process repeats itself. after I am done with that message a third dialog appears. This is happening every time I boot up my PC (a desktop), I tried following an advice I found in some forum and download windows update for ID non-user input data filter, but that installation failed as well. The thing is, that both keyboard and mouse are working fine Is there anyway to get past these dialogs ?

  Read the article

• Windows 7 & kodak printer esp 7

  - by Yoraf

  I have bought a new PC with Windows 7 and a Kodak wireless printer esp 7. I can't download the software always unsuccessful and can't connect to my printer. Any suggestions? Edit (from the other, duplicate question): Still having problems with printing. I did get it working by removing 'bonjour' but turned on yesterday and hey presto it's not working again. The printer is installed and showing as disconnected. Any ideas now? The chat doesn't work with Windows 7, I have downloaded the latest version, they take ages to answer emails, need to print stuff urgently. It's driving me insane!! Please help.

  Read the article

• how do you clear apple/mac install program files?

  - by mserin

  I installed a 30-day "test drive" of QuarkXpress, but got pulled in to other projects and didn't have time to test it. I now need to test it, but the 30 days are up. So I want to install the "test drive" again, but it won't let me. So far I uninstalled the old copy, signed up under a different account, and downloaded a new version. I know there has to be application data somewhere, but I am a PC person and don't know where to look in the Apple. HELP! Thanks. Oh, and if necessary, I am using Mac OS X (SnowLeopard) Version 10.6.8 on a MacPro

  Read the article

• Bluetooth connectivity

  - by Viniketa

  computer: Samsung All in One PC OS: Windows 7 (up-to-date) BT Radio: Broadcom I have Bluetooth speakers I have successfully used with the system in the past. In fact, I had them set as default speakers so audio would transfer when I turned them on. No longer. Now, they show as 'disconnected'. Asking for connection gives no response. Option to set as default is greyed out. Bluetooth view utility gives an error of 10049 when I try to connect (supposedly, the means an invalid device address). I uninstalled the device and re-installed. No help. Any advice? Thanks in advance.

  Read the article

< Previous Page | 243 244 245 246 247 248 249 250 251 252 253 254  | Next Page >