Search Results

Search found 11082 results on 444 pages for 'autovue 20 0'.

Page 25/444 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• IPCop Packet Mangling

  - by Zenham

  I've found myself in a pickle replacing an old firewall for a client this afternoon. I'm configuring their new IPCop firewall (1.4.21), Zerina OpenVPN addon is installed. What I need to do: There are three network interfaces, currently set up as red (WAN), green (LAN, 192.168.20.0/24) and orange (remote network 10.1.20.0/24). The orange interface is a direct fiber link to another organization. Simple description: Traffic and networks appear to be properly configured at this point, but I have many (150+) specific IPs on the LAN which, when accessing the resources on the 10.1.20.x network, need to be mangled to appear to be coming from the 10.1.20.0/24 network (and return traffic properly delivered). The routing on the far side was configured earlier and should be fine, but I need to redirect any packets coming across destined for those IPs to end up at their proper destination. The addressing is fixed and predictable (ie. 192.168.20.125 - 10.1.20.125). I need to insert whatever rules I have into the IPCop ruleset through /etc/rc.local I know, I'm just not sure about how I should structure this. There's CUSTOMOUTPUT and CUSTOMINPUT targets, both which currently just consist of the single rule redirecting packets to the OVPNOUTPUT/OVPNINPUT targets, so I'm guessing I should insert a rule matching outbound packets destined for the 10.1.20.x network and redirecting to a new target (maybe called TO-ORANGE) and a rule at the top of CUSTOMINPUT which redirects to a FROM-ORANGE target. Under those targets, I would have rules which do the IP matching and mangling. Am I approaching this right? If so, I'm not very familiar with mangle, and would appreciate seeing examples of how to write that source-IP rewrite. If not, how would you suggest doing this? TIA! edit: I notice additionally that the nat table has CUSTOMPREROUTING and CUSTOMPOSTROUTING targets, I guess I could alternatively post the rules in there....

  Read the article

• where is memory gone (no, not buffers or cache)

  - by Marki

  can anyone tell me where the memory is gone: (no, this time neither buffers nor cache) # free total used free shared buffers cached Mem: 3928200 3868560 59640 0 2888 92924 -/+ buffers/cache: 3772748 155452 Swap: 4192956 226352 3966604 top, sorted by memory, descending: top - 13:42:06 up 1 day, 3:47, 2 users, load average: 0.08, 0.12, 0.36 Tasks: 228 total, 1 running, 227 sleeping, 0 stopped, 0 zombie Cpu0 : 2.0%us, 4.0%sy, 0.0%ni, 90.1%id, 0.0%wa, 0.0%hi, 4.0%si, 0.0%st Cpu1 : 0.0%us, 0.0%sy, 0.0%ni, 0.0%id,100.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3928200k total, 3868020k used, 60180k free, 2896k buffers Swap: 4192956k total, 226048k used, 3966908k free, 82068k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3863 root 20 0 902m 199m 3296 S 7 5.2 99:08.77 ndsd 21906 root 20 0 138m 9076 2988 S 0 0.2 0:00.02 sfcbd 2332 root 20 0 126m 4660 1332 S 0 0.1 0:17.72 mono 4243 wwwrun 20 0 683m 4468 668 S 0 0.1 0:07.38 java 2994 root 20 0 202m 2288 1660 S 0 0.1 6:10.02 httpstkd 4338 root 20 0 184m 2240 1112 S 0 0.1 0:00.52 namcd 21898 root 20 0 32368 1832 1256 R 1 0.0 0:00.08 top In fact, some time ago oom kicked in and crashed the system (kernel panic), and I'm afraid we're again not far from that point.... UPDATE # cat /proc/meminfo MemTotal: 3928200 kB MemFree: 51336 kB Buffers: 2964 kB Cached: 72876 kB SwapCached: 29128 kB Active: 233440 kB Inactive: 88040 kB Active(anon): 188920 kB Inactive(anon): 56752 kB Active(file): 44520 kB Inactive(file): 31288 kB Unevictable: 0 kB Mlocked: 0 kB SwapTotal: 4192956 kB SwapFree: 3966824 kB Dirty: 32 kB Writeback: 0 kB AnonPages: 225112 kB Mapped: 11356 kB Shmem: 32 kB Slab: 1624080 kB SReclaimable: 13740 kB SUnreclaim: 1610340 kB KernelStack: 4176 kB PageTables: 10500 kB NFS_Unstable: 0 kB Bounce: 0 kB WritebackTmp: 0 kB CommitLimit: 6157056 kB Committed_AS: 2397684 kB VmallocTotal: 34359738367 kB VmallocUsed: 441372 kB VmallocChunk: 34359246755 kB HardwareCorrupted: 0 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB DirectMap4k: 10240 kB DirectMap2M: 4184064 kB slabtop Active / Total Objects (% used) : 9041019 / 9207548 (98.2%) Active / Total Slabs (% used) : 401132 / 401156 (100.0%) Active / Total Caches (% used) : 91 / 159 (57.2%) Active / Total Size (% used) : 1491537.88K / 1519791.56K (98.1%) Minimum / Average / Maximum Object : 0.02K / 0.17K / 4096.00K OBJS ACTIVE USE OBJ SIZE SLABS OBJ/SLAB CACHE SIZE NAME 4240470 4240319 99% 0.12K 141349 30 565396K pid 2245140 2219675 98% 0.25K 149676 15 598704K size-256 2238090 2210087 98% 0.12K 74603 30 298412K size-128 ...

  Read the article

• Xorg eating up too much RAM on Ubuntu 9.10 box

  - by Yang

  Xorg is eating up 444MB of 2GB total RAM on my Ubuntu 9.10 x86_64 machine with nvidia drivers installed for the nvidia G86 (GeForce 8300 GS). top shows: top - 18:21:41 up 6 days, 2:40, 9 users, load average: 0.46, 1.12, 1.22 Tasks: 266 total, 3 running, 262 sleeping, 1 stopped, 0 zombie Cpu(s): 8.4%us, 2.0%sy, 0.0%ni, 89.1%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 2055736k total, 1965136k used, 90600k free, 3952k buffers Swap: 979924k total, 979908k used, 16k free, 102636k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1432 root 20 0 1154m 442m 7492 S 8 22.0 32:56.97 Xorg 18462 yang 20 0 1001m 219m 8356 S 0 10.9 5:13.25 chrome 24099 yang 20 0 865m 83m 13m S 0 4.2 0:06.91 chrome xrestop shows: xrestop - Display: :0.0 Monitoring 47 clients. XErrors: 0 Pixmaps: 40430K total, Other: 142K total, All: 40573K total res-base Wins GCs Fnts Pxms Misc Pxm mem Other Total PID Identifier 1c00000 21 46 1 19 697 9128K 18K 9146K 3169 x-nautilus-desktop 1000000 4 3 0 17 194 9000K 4K 9004K 3134 gnome-settings-daemon 1600000 51 2 1 25 1100 7648K 28K 7676K ? compiz For comparison, here's my other Ubuntu box, which also has compiz etc. enabled but with ATI RV370 (Radeon X300SE): top - 18:18:18 up 58 days, 4:27, 9 users, load average: 0.00, 0.00, 0.00 Tasks: 224 total, 1 running, 223 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.3%sy, 0.0%ni, 98.8%id, 0.5%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 1024964k total, 987124k used, 37840k free, 247012k buffers Swap: 2048276k total, 94296k used, 1953980k free, 264744k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 24324 yang 20 0 61936 35m 6364 S 0 3.5 4:35.84 nxagent 1768 ntop 20 0 190m 32m 5388 S 1 3.2 283:36.15 ntop 1178 root 20 0 60588 29m 1788 S 0 3.0 5:48.89 console-kit-dae ... 1315 root 20 0 343m 4956 4020 S 0 0.5 3:43.87 Xorg Any ideas on how to get to the bottom of this? (i.e. not "Log out"/"Reboot") Thanks in advance.

  Read the article

• How to HIDE "client denied by server configuration:" error in log

  - by Keith

  I want to block access to my web server by default as a precaution but I keep getting the following errors showing up in my error log. [Wed Jun 27 23:30:54 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Edu.jar [Wed Jun 27 23:32:40 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/REST.jar [Wed Jun 27 23:35:39 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Set.jar [Thu Jun 28 01:01:17 2012] [error] [client 58.218.199.227] client denied by server configuration: /home/www/default/proxyheader.php [Thu Jun 28 02:34:57 2012] [error] [client 58.218.199.227] client denied by server configuration: /home/www/default/proxy.php [Thu Jun 28 05:41:33 2012] [error] [client 58.218.199.227] client denied by server configuration: /home/www/default/proxyheader.php [Thu Jun 28 06:55:10 2012] [error] [client 180.76.6.20] client denied by server configuration: /home/www/default/ [Thu Jun 28 07:31:26 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Edu.jar [Thu Jun 28 07:32:25 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/REST.jar [Thu Jun 28 07:36:10 2012] [error] [client 86.77.20.107] client denied by server configuration: /home/www/default/Set.jar I don't really want these errors to show up but whatever I do, I can't get rid of them. Does anyone know how I can achieve this? Here is a copy of my configuration. <VirtualHost *:80> DocumentRoot /home/www/default <Directory /> AllowOverride None Order Deny,Allow Deny from all </Directory> #ErrorLog /var/log/apache2/error.log #LogLevel warn CustomLog /var/log/apache2/access.log combined </VirtualHost>

  Read the article

• OpenVPN Keeps Crashing

  - by Frank Thornton

  Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28523 [vpntest] Peer Connection Initiated with [AF_INET]<MY_IP>:28523 Oct 20 21:00:44 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 MULTI_sva: pool returned IPv4=10.8.0.6, IPv6=(Not enabled) Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'link-mtu' is used inconsistently, local='link-mtu 1576', remote='link-mtu 1376' Oct 20 21:00:44 sb1 openvpn[2082]: <MY_IP>:28522 WARNING: 'tun-mtu' is used inconsistently, local='tun-mtu 1532', remote='tun-mtu 1332' Oct 20 21:00:45 sb1 openvpn[2082]: <MY_IP>:28522 [vpntest2] Peer Connection Initiated with [AF_INET]<MY_IP>:28522 Oct 20 21:00:45 sb1 openvpn[2082]: vpntest2/<MY_IP>:28522 MULTI_sva: pool returned IPv4=10.8.0.10, IPv6=(Not enabled) Oct 20 21:00:46 sb1 openvpn[2082]: vpntest/<MY_IP>:28523 send_push_reply(): safe_cap=940 Client File: client dev tun proto tcp remote <IP> 443 resolv-retry infinite nobind tun-mtu 1500 tun-mtu-extra 32 mssfix 1410 persist-key persist-tun auth-user-pass comp-lzo SERVER: port 443 #- port proto tcp #- protocol dev tun tun-mtu 1500 tun-mtu-extra 32 reneg-sec 0 #mtu-disc yes mssfix 1410 ca /etc/openvpn/easy-rsa/2.0/keys/ca.crt cert /etc/openvpn/easy-rsa/2.0/keys/server.crt key /etc/openvpn/easy-rsa/2.0/keys/server.key dh /etc/openvpn/easy-rsa/2.0/keys/dh1024.pem plugin /etc/openvpn/openvpn-auth-pam.so /etc/pam.d/login #plugin /usr/share/openvpn/plugin/lib/openvpn-auth-pam.so /etc/pam.d/login #- Comment this line if you are using FreeRADIUS #plugin /etc/openvpn/radiusplugin.so /etc/openvpn/radiusplugin.cnf #- Uncomment this line if you are using FreeRADIUS client-to-client client-cert-not-required username-as-common-name server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" push "dhcp-option DNS 8.8.8.8" push "dhcp-option DNS 8.8.4.4" keepalive 3 30 comp-lzo persist-key persist-tun What is causing the VPN to keep dropping the connection and then reconnecting?

  Read the article

• Timely automatic unexpected reboot on ubuntu desktop

  - by ahmad

  We have a remote linux server (ubuntu desktop). The system log indicates the system has been restarted on the timely fashion. Here is a part of the last output: ut pts/0 192.169.50.2-sta Sat Nov 24 22:17 still logged in reboot system boot 2.6.32-21-generi Sat Nov 24 22:04 - 22:17 (00:13) ut pts/0 server.local Sat Nov 24 21:36 - crash (00:27) reboot system boot 2.6.32-21-generi Sat Nov 24 15:55 - 22:17 (06:21) reboot system boot 2.6.32-21-generi Fri Nov 23 18:02 - 22:17 (1+04:14) reboot system boot 2.6.32-21-generi Fri Nov 23 10:39 - 22:17 (1+11:38) reboot system boot 2.6.32-21-generi Fri Nov 23 04:18 - 22:17 (1+17:59) reboot system boot 2.6.32-21-generi Fri Nov 23 03:57 - 22:17 (1+18:20) reboot system boot 2.6.32-21-generi Thu Nov 22 20:38 - 22:17 (2+01:38) reboot system boot 2.6.32-21-generi Thu Nov 22 11:13 - 22:17 (2+11:03) reboot system boot 2.6.32-21-generi Thu Nov 22 08:12 - 22:17 (2+14:05) reboot system boot 2.6.32-21-generi Wed Nov 21 11:16 - 22:17 (3+11:00) reboot system boot 2.6.32-21-generi Tue Nov 20 22:36 - 22:17 (3+23:41) reboot system boot 2.6.32-21-generi Tue Nov 20 14:12 - 22:17 (4+08:05) reboot system boot 2.6.32-21-generi Tue Nov 20 11:32 - 22:17 (4+10:44) reboot system boot 2.6.32-21-generi Tue Nov 20 01:52 - 22:17 (4+20:25) reboot system boot 2.6.32-21-generi Tue Nov 20 00:22 - 22:17 (4+21:55) reboot system boot 2.6.32-21-generi Mon Nov 19 17:27 - 22:17 (5+04:50) It looks the system is set to be restarted at 22:17. Can anyone guide me why this happens? Thanks in advance.

  Read the article

• Need help trouble shooting high CPU usage by PHP-fpm

  - by user432506

  There is a problem that is driving me crazy. After the day I tried to fix the CPU usage problem of my VPS, the CPU load has grown from 60% to 150%, and I have no idea what causes the problem. Please help me. I had installed a copy of mediawiki on a Linode 1024. The wiki is running on Niginx + PHP-fpm + MySql. The wiki doesn't have much traffic, only around 4000 requests/day, mostly from Google and Bing bots. It had been using around 60% (of total 400% on the Linode) of the CPU before. I thought it was a bit high, so two day ago, I was trying to fix the problem (not knowing what was waiting for me). I did nothing but added a new empty line to wiki's configure file, which would change the modified time of the configure file, and then all the cached page files would be set invalidated. I had done that before, and that would cause high CPU usage, but normally it would take only hours to let things back to normal again. Not this time, my CPU usage has been around 150% for more than two days. It is php-fpm using most of CPU reassures. Using 100% of three cores is not rare. I hadn't seen that before. There are other sites on the Linode, but it should be the wiki. Because if I offline the wiki, CPU usage will drop back to around 40% soon. The day I also duplicated php-fpm.conf, and opened it, but didn't changed it. I have no idea what I did wrong. I here ask for help to save myself from being crazy!!! It is php-fpm. Is there a way to find out what is it doing? I mean like which scripts are related and what function codes are running? top: top - 06:34:33 up 10 days, 4:23, 2 users, load average: 1.10, 1.24, 1.37 Tasks: 76 total, 4 running, 72 sleeping, 0 stopped, 0 zombie Cpu(s): 61.1%us, 3.1%sy, 0.0%ni, 32.8%id, 2.9%wa, 0.0%hi, 0.0%si, 0.1%st Mem: 1028684k total, 945192k used, 83492k free, 89580k buffers Swap: 524284k total, 18084k used, 506200k free, 530380k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 26721 www-data 20 0 208m 54m 34m R 99 5.4 0:09.07 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26592 www-data 20 0 207m 45m 26m R 91 4.5 0:12.77 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26706 www-data 20 0 196m 43m 34m S 47 4.3 0:15.19 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26583 www-data 20 0 197m 45m 35m S 33 4.5 0:19.08 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26787 www-data 20 0 206m 36m 18m R 25 3.7 0:00.41 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 26661 www-data 20 0 207m 46m 26m S 13 4.6 0:19.87 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 1971 mysql 20 0 155m 57m 3952 S 8 5.7 383:57.81 /usr/sbin/mysqld 242 root 20 0 0 0 0 S 1 0.0 0:51.36 [kworker/3:1] 5711 root 20 0 139m 95m 580 S 1 9.5 0:41.30 /usr/local/bin/memcached -d -u root -m 128 -p 11211 19463 root 20 0 190m 3984 1284 S 1 0.4 0:02.66 /opt/php5/sbin/php-fpm --fpm-config /opt/php5/etc/php-fpm.conf 29100 www-data 20 0 10928 5540 820 S 1 0.5 4:49.05 nginx: worker process vmstat 30 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 16912 81456 90784 554172 0 0 4 6 3 2 11 1 87 1 0 0 16912 78036 91000 555356 0 0 38 34 1397 375 12 1 87 0 4 0 16912 31776 91528 557508 0 0 78 42 3197 487 45 1 52 1 1 0 16912 83356 91768 558576 0 0 35 56 2608 449 32 1 67 1 1 0 16912 81548 92040 559720 0 0 41 31 1243 432 8 1 91 1 2 0 16912 53056 92332 562744 0 0 105 33 2013 581 17 1 81 1 2 0 16912 73236 92552 564844 0 0 68 36 1968 615 16 1 82 1 0 0 16912 91612 92904 566676 0 0 69 35 1845 692 13 1 85 1 1 0 16912 71248 93180 568428 0 0 58 33 1952 604 15 1 82 1 1 0 16868 55952 93516 572660 1 0 144 42 1801 637 12 1 86 1 2 0 16868 48324 94416 577844 0 0 189 66 2058 702 17 1 80 2 1 0 16928 58644 94592 578184 0 2 160 49 2578 723 25 1 70 3 5 0 16928 22600 94980 580568 0 0 89 32 1496 361 13 0 85 1 0 0 16988 49256 94500 576396 0 2 41 37 1601 426 14 1 85 0 5 0 18084 24336 86032 502748 0 37 83 68 2989 562 42 1 56 0 1 0 18084 123604 86376 506996 0 0 118 41 2201 573 22 1 76 1 2 0 18084 126984 86752 508876 0 0 64 53 1620 490 13 1 85 1 2 0 18084 103104 87148 510768 0 0 71 37 2757 602 33 1 64 1

  Read the article

• C# acting weird when reading in values from a file to an array

  - by Whitey

  This is the structure of my file: 1111111111111111111111111 2222222222222222222222222 3333333333333333333333333 4444444444444444444444444 5555555555555555555555555 6666666666666666666666666 7777777777777777777777777 8888888888888888888888888 9999999999999999999999999 0000000000000000000000000 0000000000000000000000000 0000000000000000000000000 0000000000000000000000000 0000000000000000000000000 And this is the code I'm using to read it into an array: using (StreamReader reader = new StreamReader(mapPath)) { string line; for (int i = 0; i < iMapHeight; i++) { if ((line = reader.ReadLine()) != null) { for (int j = 0; j < iMapWidth; j++) { iMap[i, j] = line[j]; } } } } I have done some debugging, and line[j] correctly iterates through each character in the currently read line. The problem lies with iMap[i, j]. After this block of code executes, this is the contents of iMap: - iMap {int[14, 25]} int[,] [0, 0] 49 int [0, 1] 49 int [0, 2] 49 int [0, 3] 49 int [0, 4] 49 int [0, 5] 49 int [0, 6] 49 int [0, 7] 49 int [0, 8] 49 int [0, 9] 49 int [0, 10] 49 int [0, 11] 49 int [0, 12] 49 int [0, 13] 49 int [0, 14] 49 int [0, 15] 49 int [0, 16] 49 int [0, 17] 49 int [0, 18] 49 int [0, 19] 49 int [0, 20] 49 int [0, 21] 49 int [0, 22] 49 int [0, 23] 49 int [0, 24] 49 int [1, 0] 50 int [1, 1] 50 int [1, 2] 50 int [1, 3] 50 int [1, 4] 50 int [1, 5] 50 int [1, 6] 50 int [1, 7] 50 int [1, 8] 50 int [1, 9] 50 int [1, 10] 50 int [1, 11] 50 int [1, 12] 50 int [1, 13] 50 int [1, 14] 50 int [1, 15] 50 int [1, 16] 50 int [1, 17] 50 int [1, 18] 50 int [1, 19] 50 int [1, 20] 50 int [1, 21] 50 int [1, 22] 50 int [1, 23] 50 int [1, 24] 50 int [2, 0] 51 int [2, 1] 51 int [2, 2] 51 int [2, 3] 51 int [2, 4] 51 int [2, 5] 51 int [2, 6] 51 int [2, 7] 51 int [2, 8] 51 int [2, 9] 51 int [2, 10] 51 int [2, 11] 51 int [2, 12] 51 int [2, 13] 51 int [2, 14] 51 int [2, 15] 51 int [2, 16] 51 int [2, 17] 51 int [2, 18] 51 int [2, 19] 51 int [2, 20] 51 int [2, 21] 51 int [2, 22] 51 int [2, 23] 51 int [2, 24] 51 int [3, 0] 52 int [3, 1] 52 int [3, 2] 52 int [3, 3] 52 int [3, 4] 52 int [3, 5] 52 int [3, 6] 52 int [3, 7] 52 int [3, 8] 52 int [3, 9] 52 int [3, 10] 52 int [3, 11] 52 int [3, 12] 52 int [3, 13] 52 int [3, 14] 52 int [3, 15] 52 int [3, 16] 52 int [3, 17] 52 int [3, 18] 52 int [3, 19] 52 int [3, 20] 52 int [3, 21] 52 int [3, 22] 52 int [3, 23] 52 int [3, 24] 52 int [4, 0] 53 int [4, 1] 53 int [4, 2] 53 int [4, 3] 53 int [4, 4] 53 int [4, 5] 53 int [4, 6] 53 int [4, 7] 53 int [4, 8] 53 int [4, 9] 53 int [4, 10] 53 int [4, 11] 53 int [4, 12] 53 int [4, 13] 53 int [4, 14] 53 int [4, 15] 53 int [4, 16] 53 int [4, 17] 53 int [4, 18] 53 int [4, 19] 53 int [4, 20] 53 int [4, 21] 53 int [4, 22] 53 int [4, 23] 53 int [4, 24] 53 int [5, 0] 54 int [5, 1] 54 int [5, 2] 54 int [5, 3] 54 int [5, 4] 54 int [5, 5] 54 int [5, 6] 54 int [5, 7] 54 int [5, 8] 54 int [5, 9] 54 int [5, 10] 54 int [5, 11] 54 int [5, 12] 54 int [5, 13] 54 int [5, 14] 54 int [5, 15] 54 int [5, 16] 54 int [5, 17] 54 int [5, 18] 54 int [5, 19] 54 int [5, 20] 54 int [5, 21] 54 int [5, 22] 54 int [5, 23] 54 int [5, 24] 54 int [6, 0] 55 int [6, 1] 55 int [6, 2] 55 int [6, 3] 55 int [6, 4] 55 int [6, 5] 55 int [6, 6] 55 int [6, 7] 55 int [6, 8] 55 int [6, 9] 55 int [6, 10] 55 int [6, 11] 55 int [6, 12] 55 int [6, 13] 55 int [6, 14] 55 int [6, 15] 55 int [6, 16] 55 int [6, 17] 55 int [6, 18] 55 int [6, 19] 55 int [6, 20] 55 int [6, 21] 55 int [6, 22] 55 int [6, 23] 55 int [6, 24] 55 int [7, 0] 56 int [7, 1] 56 int [7, 2] 56 int [7, 3] 56 int [7, 4] 56 int [7, 5] 56 int [7, 6] 56 int [7, 7] 56 int [7, 8] 56 int [7, 9] 56 int [7, 10] 56 int [7, 11] 56 int [7, 12] 56 int [7, 13] 56 int [7, 14] 56 int [7, 15] 56 int [7, 16] 56 int [7, 17] 56 int [7, 18] 56 int [7, 19] 56 int [7, 20] 56 int [7, 21] 56 int [7, 22] 56 int [7, 23] 56 int [7, 24] 56 int [8, 0] 57 int [8, 1] 57 int [8, 2] 57 int [8, 3] 57 int [8, 4] 57 int [8, 5] 57 int [8, 6] 57 int [8, 7] 57 int [8, 8] 57 int [8, 9] 57 int [8, 10] 57 int [8, 11] 57 int [8, 12] 57 int [8, 13] 57 int [8, 14] 57 int [8, 15] 57 int [8, 16] 57 int [8, 17] 57 int [8, 18] 57 int [8, 19] 57 int [8, 20] 57 int [8, 21] 57 int [8, 22] 57 int [8, 23] 57 int [8, 24] 57 int [9, 0] 48 int [9, 1] 48 int [9, 2] 48 int [9, 3] 48 int [9, 4] 48 int [9, 5] 48 int [9, 6] 48 int [9, 7] 48 int [9, 8] 48 int [9, 9] 48 int [9, 10] 48 int [9, 11] 48 int [9, 12] 48 int [9, 13] 48 int [9, 14] 48 int [9, 15] 48 int [9, 16] 48 int [9, 17] 48 int [9, 18] 48 int [9, 19] 48 int [9, 20] 48 int [9, 21] 48 int [9, 22] 48 int [9, 23] 48 int [9, 24] 48 int [10, 0] 48 int [10, 1] 48 int [10, 2] 48 int [10, 3] 48 int [10, 4] 48 int [10, 5] 48 int [10, 6] 48 int [10, 7] 48 int [10, 8] 48 int [10, 9] 48 int [10, 10] 48 int [10, 11] 48 int [10, 12] 48 int [10, 13] 48 int [10, 14] 48 int [10, 15] 48 int [10, 16] 48 int [10, 17] 48 int [10, 18] 48 int [10, 19] 48 int [10, 20] 48 int [10, 21] 48 int [10, 22] 48 int [10, 23] 48 int [10, 24] 48 int [11, 0] 48 int [11, 1] 48 int [11, 2] 48 int [11, 3] 48 int [11, 4] 48 int [11, 5] 48 int [11, 6] 48 int [11, 7] 48 int [11, 8] 48 int [11, 9] 48 int [11, 10] 48 int [11, 11] 48 int [11, 12] 48 int [11, 13] 48 int [11, 14] 48 int [11, 15] 48 int [11, 16] 48 int [11, 17] 48 int [11, 18] 48 int [11, 19] 48 int [11, 20] 48 int [11, 21] 48 int [11, 22] 48 int [11, 23] 48 int [11, 24] 48 int [12, 0] 48 int [12, 1] 48 int [12, 2] 48 int [12, 3] 48 int [12, 4] 48 int [12, 5] 48 int [12, 6] 48 int [12, 7] 48 int [12, 8] 48 int [12, 9] 48 int [12, 10] 48 int [12, 11] 48 int [12, 12] 48 int [12, 13] 48 int [12, 14] 48 int [12, 15] 48 int [12, 16] 48 int [12, 17] 48 int [12, 18] 48 int [12, 19] 48 int [12, 20] 48 int [12, 21] 48 int [12, 22] 48 int [12, 23] 48 int [12, 24] 48 int [13, 0] 48 int [13, 1] 48 int [13, 2] 48 int [13, 3] 48 int [13, 4] 48 int [13, 5] 48 int [13, 6] 48 int [13, 7] 48 int [13, 8] 48 int [13, 9] 48 int [13, 10] 48 int [13, 11] 48 int [13, 12] 48 int [13, 13] 48 int [13, 14] 48 int [13, 15] 48 int [13, 16] 48 int [13, 17] 48 int [13, 18] 48 int [13, 19] 48 int [13, 20] 48 int [13, 21] 48 int [13, 22] 48 int [13, 23] 48 int [13, 24] 48 int Sorry for the lame formatting, but it's huge :P I have no idea where it's getting these values from, does anyone have an explanation? Thanks :)

  Read the article

• Spam Assassin on windows

  - by ebeworld

  I just installed spam assassin and run for its sample ham mail as spamassassin sample-nonspam.txt, but it ended up marking it as a spam. What configuration am i missing to change? Result of the check is: From: Keith Dawson To: [email protected] Subject: **SPAM** TBTF ping for 2001-04-20: Reviving Date: Fri, 20 Apr 2001 16:59:58 -0400 Message-Id: X-Spam-Flag: YES X-Spam-Checker-Version: SpamAssassin 3.2.3 (2007-08-08) on ebeworld-PC X-Spam-Level: **** X-Spam-Status: Yes, score=10.5 required=6.3 tests=DCC_CHECK,DIGEST_MULTIPLE, DNS_FROM_OPENWHOIS,RAZOR2_CF_RANGE_51_100,RAZOR2_CF_RANGE_E4_51_100, RAZOR2_CHECK shortcircuit=no autolearn=no version=3.2.3 MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="----------=_4BF17E8E.BF8E0000" This is a multi-part message in MIME format. ------------=_4BF17E8E.BF8E0000 Content-Type: text/plain; charset=iso-8859-1 Content-Disposition: inline Content-Transfer-Encoding: 8bit This mail is probably spam. The original message has been attached intact in RFC 822 format. Content preview: -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t [...] Content analysis details: (10.5 points, 6.3 required) 2.4 DNS_FROM_OPENWHOIS RBL: Envelope sender listed in bl.open-whois.org. 1.5 RAZOR2_CF_RANGE_E4_51_100 Razor2 gives engine 4 confidence level above 50% [cf: 58] 2.5 RAZOR2_CHECK Listed in Razor2 (http://razor.sf.net/) 0.5 RAZOR2_CF_RANGE_51_100 Razor2 gives confidence level above 50% [cf: 58] 3.6 DCC_CHECK Listed in DCC (http://rhyolite.com/anti-spam/dcc/) 0.0 DIGEST_MULTIPLE Message hits more than one network digest check ------------=_4BF17E8E.BF8E0000 Content-Type: message/rfc822; x-spam-type=original Content-Description: original message before SpamAssassin Content-Disposition: inline Content-Transfer-Encoding: 8bit Return-Path: Delivered-To: [email protected] Received: from europe.std.com (europe.std.com [199.172.62.20]) by mail.netnoteinc.com (Postfix) with ESMTP id 392E1114061 for ; Fri, 20 Apr 2001 21:34:46 +0000 (Eire) Received: (from daemon@localhost) by europe.std.com (8.9.3/8.9.3) id RAA09630 for tbtf-outgoing; Fri, 20 Apr 2001 17:31:18 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA08749 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8278330 for ; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: (from dawson@localhost) by world.std.com (8.9.3/8.9.3) id RAA26781 for [email protected]; Fri, 20 Apr 2001 17:24:31 -0400 (EDT) Received: from sgi04-e.std.com (sgi04-e.std.com [199.172.62.134]) by europe.std.com (8.9.3/8.9.3) with ESMTP id RAA07541 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from world.std.com (world-f.std.com [199.172.62.5]) by sgi04-e.std.com (8.9.3/8.9.3) with ESMTP id RAA8416421 for ; Fri, 20 Apr 2001 17:12:06 -0400 (EDT) Received: from [208.192.102.193] (ppp0c199.std.com [208.192.102.199]) by world.std.com (8.9.3/8.9.3) with ESMTP id RAA14226 for ; Fri, 20 Apr 2001 17:12:04 -0400 (EDT) Mime-Version: 1.0 Message-Id: Date: Fri, 20 Apr 2001 16:59:58 -0400 To: [email protected] From: Keith Dawson Subject: TBTF ping for 2001-04-20: Reviving Content-Type: text/plain; charset="us-ascii" Sender: [email protected] Precedence: list Reply-To: [email protected] -----BEGIN PGP SIGNED MESSAGE----- TBTF ping for 2001-04-20: Reviving T a s t y B i t s f r o m t h e T e c h n o l o g y F r o n t Timely news of the bellwethers in computer and communications technology that will affect electronic commerce -- since 1994 Your Host: Keith Dawson ISSN: 1524-9948 This issue: < http://tbtf.com/archive/2001-04-20.html > To comment on this issue, please use this forum at Quick Topic: < http://www.quicktopic.com/tbtf/H/kQGJR2TXL6H > ________________________________________________________________________ Q u o t e O f T h e M o m e n t Even organizations that promise "privacy for their customers" rarely if ever promise "continued privacy for their former customers..." Once you cancel your account with any business, their promises of keeping the information about their customers private no longer apply... you're not a customer any longer. This is in the large category of business behaviors that individuals would consider immoral and deceptive -- and businesses know are not illegal. -- "_ankh," writing on the XNStalk mailing list ________________________________________________________________________ ..TBTF's long hiatus is drawing to a close Hail subscribers to the TBTF mailing list. Some 2,000 [1] of you have signed up since the last issue [2] was mailed on 2000-07-20. This brief note is the first of several I will send to this list to excise the dead addresses prior to resuming regular publication. While you time the contractions of the newsletter's rebirth, I in- vite you to read the TBTF Log [3] and sign up for its separate free subscription. Send "subscribe" (no quotes) with any subject to [email protected] . I mail out collected Log items on Sun- days. If you need to stay more immediately on top of breaking stories, pick up the TBTF Log's syndication file [4] or read an aggregator that does. Examples are Slashdot's Cheesy Portal [5], Userland [6], and Sitescooper [7]. If your news obsession runs even deeper and you own an SMS-capable cell phone or PDA, sign up on TBTF's WebWire- lessNow portal [8]. A free call will bring you the latest TBTF Log headline, Jargon Scout [9] find, or Siliconium [10]. Two new columnists have bloomed on TBTF since last summer: Ted By- field's roving_reporter [11] and Gary Stock's UnBlinking [12]. Late- ly Byfield has been writing in unmatched depth about ICANN, but the roving_reporter nym's roots are in commentary at the intersection of technology and culture. Stock's UnBlinking latches onto topical sub- jects and pursues them to the ends of the Net. These writers' voices are compelling and utterly distinctive. [1] http://tbtf.com/growth.html [2] http://tbtf.com/archive/2000-07-20.html [3] http://tbtf.com/blog/ [4] http://tbtf.com/tbtf.rdf [5] http://www.slashdot.org/cheesyportal.shtml [6] http://my.userland.com/ [7] http://www.sitescooper.org/ [8] http://tbtf.com/pull-wwn/ [9] http://tbtf.com/jargon-scout.html [10] http://tbtf.com/siliconia.html [11] http://tbtf.com/roving_reporter/ [12] http://tbtf.com/unblinking/ ________________________________________________________________________ S o u r c e s For a complete list of TBTF's email and Web sources, see http://tbtf.com/sources.html . ________________________________________ B e n e f a c t o r s TBTF is free. If you get value from this publication, please visit the TBTF Benefactors page < http://tbtf.com/the-benefactors.html > and consider contributing to its upkeep. ________________________________________________________________________ TBTF home and archive at http://tbtf.com/ . To unsubscribe send the message "unsubscribe" to [email protected]. TBTF is Copy- right 1994-2000 by Keith Dawson, <[email protected]>. Commercial use prohibited. For non-commercial purposes please forward, post, and link as you see fit. _______________________________________________ Keith Dawson [email protected] Layer of ash separates morning and evening milk. -----BEGIN PGP SIGNATURE----- Version: PGPfreeware 6.5.2 for non-commercial use http://www.pgp.com iQCVAwUBOuCi3WAMawgf2iXRAQHeAQQA3YSePSQ0XzdHZUVskFDkTfpE9XS4fHQs WaT6a8qLZK9PdNcoz3zggM/Jnjdx6CJqNzxPEtxk9B2DoGll/C/60HWNPN+VujDu Xav65S0P+Px4knaQcCIeCamQJ7uGcsw+CqMpNbxWYaTYmjAfkbKH1EuLC2VRwdmD wQmwrDp70v8= =8hLB -----END PGP SIGNATURE----- ------------=_4BF17E8E.BF8E0000--

  Read the article

• Apache Never runs after configuring eAccelerator and FastCGI

  - by Shoaibi

  I recently configured accelerator and fastcgi with apache using: http://secure-ubuntu-server.blogspot.com/2009/07/howto-performance-tuning-of-lamp-and.html Now my Apache never starts. Logs shows: Mon Jul 20 16:12:24 2009] [notice] ModSecurity for Apache/2.5.6 (http://www.modsecurity.org/) configured. [Mon Jul 20 16:12:25 2009] [notice] FastCGI: process manager initialized (pid 10919) [Mon Jul 20 16:12:25 2009] [alert] FastCGI: read() from pipe failed (0) [Mon Jul 20 16:12:25 2009] [alert] FastCGI: the PM is shutting down, Apache seems to have disappeared - bye

  Read the article

• Slow Memcached: Average 10ms memcached `get`

  - by Chris W.

  We're using Newrelic to measure our Python/Django application performance. Newrelic is reporting that across our system "Memcached" is taking an average of 12ms to respond to commands. Drilling down into the top dozen or so web views (by # of requests) I can see that some Memcache get take up to 30ms; I can't find a single use of Memcache get that returns in less than 10ms. More details on the system architecture: Currently we have four application servers each of which has a memcached member. All four memcached members participate in a memcache cluster. We're running on a cloud hosting provider and all traffic is running across the "internal" network (via "internal" IPs) When I ping from one application server to another the responses are in ~0.5ms Isn't 10ms a slow response time for Memcached? As far as I understand if you think "Memcache is too slow" then "you're doing it wrong". So am I doing it wrong? Here's the output of the memcache-top command: memcache-top v0.7 (default port: 11211, color: on, refresh: 3 seconds) INSTANCE USAGE HIT % CONN TIME EVICT/s GETS/s SETS/s READ/s WRITE/s cache1:11211 37.1% 62.7% 10 5.3ms 0.0 73 9 3958 84.6K cache2:11211 42.4% 60.8% 11 4.4ms 0.0 46 12 3848 62.2K cache3:11211 37.5% 66.5% 12 4.2ms 0.0 75 17 6056 170.4K AVERAGE: 39.0% 63.3% 11 4.6ms 0.0 64 13 4620 105.7K TOTAL: 0.1GB/ 0.4GB 33 13.9ms 0.0 193 38 13.5K 317.2K (ctrl-c to quit.) ** Here is the output of the top command on one machine: ** (Roughly the same on all cluster machines. As you can see there is very low CPU utilization, because these machines only run memcache.) top - 21:48:56 up 1 day, 4:56, 1 user, load average: 0.01, 0.06, 0.05 Tasks: 70 total, 1 running, 69 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni, 99.7%id, 0.0%wa, 0.0%hi, 0.0%si, 0.3%st Mem: 501392k total, 424940k used, 76452k free, 66416k buffers Swap: 499996k total, 13064k used, 486932k free, 181168k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 6519 nobody 20 0 384m 74m 880 S 1.0 15.3 18:22.97 memcached 3 root 20 0 0 0 0 S 0.3 0.0 0:38.03 ksoftirqd/0 1 root 20 0 24332 1552 776 S 0.0 0.3 0:00.56 init 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 4 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kworker/0:0 5 root 20 0 0 0 0 S 0.0 0.0 0:00.02 kworker/u:0 6 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0.0 0.0 0:00.62 watchdog/0 8 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 cpuset 9 root 0 -20 0 0 0 S 0.0 0.0 0:00.00 khelper ...output truncated...

  Read the article

• Which will give more free RAM to linux?

  - by Linda Thomas

  Trying to avoid some issues so I've been trying to learn vm. in kernel tuning but still a little confused even after googling. The lower background_ratio is the sooner the flushes? the lower dirty_ratio is the less dirty ram that is kept, right vm.dirty_ratio = 20 vm.dirty_background_ratio = 1 or vm.dirty_ratio = 60 vm.dirty_background_ratio = 20 or vm.dirty_ratio = 20 vm.dirty_background_ratio = 10 or vm.dirty_ratio = 20 vm.dirty_background_ratio = 5

  Read the article

• access_log item w/out IP. Starts with "::1 - - [<date>]"

  - by Meltemi

  Looking at our Apache log I see normal requests like: 174.133.xxx.xxx - - [20/May/2010:17:36:44 -0700] "GET /index.html HTTP/1.1" 200 2004 but every so often i get a cluster of these w/out an IP address. ::1 - - [20/May/2010:18:47:21 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:22 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:23 -0700] "OPTIONS * HTTP/1.0" 200 - what do they mean and curious what causes them?

  Read the article

• Configure spanning tree from HP to Cisco hardware

  - by Tim Brigham

  I have three switches I'd like to configure in a loop - a Cisco stack (3750s) and two HP 2900 series. Each is connected to the next with a 10 gig backplane of one form or another. How do I configure the spanning tree on these systems to make this function correctly? From the documents I've looked at it looks like I need to set both sets of hardware to use MST mode but I'm not sure past that point. The trunking, etc is all set up as needed. HP Switch 1 A4 connected to Cisco 1/0/1. HP Switch 2 B2 connected to Cisco 2/0/1. HP Switch 1 A2 connected to HP Switch 2 A1. HP Switch 1 show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 1-4094 Switch MAC Address : 0021f7-126580 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 352,485 Time Since Last Change : 2 secs CST Root MAC Address : 0018ba-c74268 CST Root Priority : 1 CST Root Path Cost : 200000 CST Root Port : 1 IST Regional Root MAC Address : 0021f7-126580 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- ... A1 | Auto 128 Disabled | A2 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A3 10GbE-CX4 | Auto 128 Disabled | A4 10GbE-SR | 2000 128 Forwarding | 0021f7-126580 2 Yes No HP Switch 2 show spanning-tree Multiple Spanning Tree (MST) Information STP Enabled : Yes Force Version : MSTP-operation IST Mapped VLANs : 1-4094 Switch MAC Address : 0024a8-cd6000 Switch Priority : 32768 Max Age : 20 Max Hops : 20 Forward Delay : 15 Topology Change Count : 19,623 Time Since Last Change : 32 secs CST Root MAC Address : 0018ba-c74268 CST Root Priority : 1 CST Root Path Cost : 202000 CST Root Port : A1 IST Regional Root MAC Address : 0024a8-cd6000 IST Regional Root Priority : 32768 IST Regional Root Path Cost : 0 IST Remaining Hops : 20 Root Guard Ports : TCN Guard Ports : BPDU Protected Ports : BPDU Filtered Ports : PVST Protected Ports : PVST Filtered Ports : | Prio | Designated Hello Port Type | Cost rity State | Bridge Time PtP Edge ----- --------- + --------- ---- ---------- + ------------- ---- --- ---- ... A1 10GbE-CX4 | 2000 128 Forwarding | 0021f7-126580 2 Yes No A2 10GbE-CX4 | Auto 128 Disabled | B1 SFP+SR | 2000 128 Blocking | a44c11-a67c80 2 Yes No B2 | Auto 128 Disabled | Cisco Stack 1 show spanning-tree ... (additional VLANs) VLAN0100 Spanning tree enabled protocol ieee Root ID Priority 1 Address 0018.bac7.426e Cost 2 Port 107 (TenGigabitEthernet2/1/1) Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Bridge ID Priority 32868 (priority 32768 sys-id-ext 100) Address a44c.11a6.7c80 Hello Time 2 sec Max Age 20 sec Forward Delay 15 sec Aging Time 300 sec Interface Role Sts Cost Prio.Nbr Type ------------------- ---- --- --------- -------- -------------------------------- Te1/1/1 Desg FWD 2 128.53 P2p Te2/1/1 Root FWD 2 128.107 P2p

  Read the article

• How can I avoid Windows 8.1 resetting my font size?

  - by Michael Tsang

  I am using Windows 8.1 on my laptop, which has a 15.6" screen with resolution 1366x768. I measured the screen with a ruler and calculated its DPI, which is 101. Therefore, I have set the scaling to 105%. However, when I change to an external monitor, which is a huge one with resolution 1920x1080 and DPI 93, I need to change the scaling to 97% but when I change the DPI back and forth, my font sizes have get resetted. I prefer using font sizes 14 on my title bars, message boxes and icons and font sizes 13 on my palette titles, menus and tooltips. However, as my laptop screen is too small, in order to make my apps fit on screen, I use font sizes 12 on my title bars, message boxes and icons and font sizes 11 on my palette titles, menus and tooltips. I don't know why I can't resize the window to make it larger than my screen in Windows (but it is possible in Kubuntu), therefore, some parts of my apps cannot be shown with my preferred font size. I have tried changing both the DPI and the font size by using .reg files. Before switching to my laptop screen, I apply the following: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "LogPixels"=dword:00000065 [HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "CaptionFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "SmCaptionFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\ 00,00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MenuFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "StatusFont"=hex:f0,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MessageFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "IconFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "AppliedDPI"=dword:00000065 Before switching to my external display, I apply this: Windows Registry Editor Version 5.00 [HKEY_CURRENT_USER\Control Panel\Desktop] "LogPixels"=dword:0000005d [HKEY_CURRENT_USER\Control Panel\Desktop\WindowMetrics] "CaptionFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "SmCaptionFont"=hex:ee,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,bc,02,00,\ 00,00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MenuFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "StatusFont"=hex:ef,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "MessageFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,\ 00,00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "IconFont"=hex:ed,ff,ff,ff,00,00,00,00,00,00,00,00,00,00,00,00,90,01,00,00,00,\ 00,00,01,00,00,05,00,53,00,65,00,67,00,6f,00,65,00,20,00,55,00,49,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\ 00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00 "AppliedDPI"=dword:0000005d I expect after applying the file, the DPI settings and the font sizes take effect at the next sign in. However, on my laptop screen, after I applied the file, signed out and in, the DPI setting changed, but the font sizes were resetted to tiny, and I had to apply the same file, signed out and in again to get the correct font size. The situation is even worse on my external monitor. After I applied the file, signed out and in, both the DPI setting and the font sizes were resetted to their default values, which were 96 DPI (the physical DPI as measured by dividing the resolution by the physical size is 93) and font size 9, which is totally unacceptable. How can I write the .reg files such that the settings can be correctly applied with a single sign in?

  Read the article

• GMail detecting mail as spam

  - by Petru Toader

  I've been trying for a long time to get our company's mail server send mail that will get accepted by the GMail spam filter. I have managed making it work for Yahoo Mail and Hotmail, sadly GMail is still marking our mails as spam. I have configured DKIM, SPF, DMARC and verified our mail server IP address against blacklists. I also have pasted here the headers GMail gets when we send a mail. Delivered-To: [email protected] Received: by 10.42.215.6 with SMTP id hc6csp107427icb; Wed, 20 Aug 2014 07:34:26 -0700 (PDT) X-Received: by 10.194.100.34 with SMTP id ev2mr59101019wjb.76.1408545265402; Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Return-Path: <[email protected]> Received: from mail.phyramid.com (mail.phyramid.com. [178.157.82.23]) by mx.google.com with ESMTPS id dj10si4827754wib.79.2014.08.20.07.34.24 for <[email protected]> (version=TLSv1.1 cipher=ECDHE-RSA-RC4-SHA bits=128/128); Wed, 20 Aug 2014 07:34:25 -0700 (PDT) Received-SPF: pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) client-ip=178.157.82.23; Authentication-Results: mx.google.com; spf=pass (google.com: domain of [email protected] designates 178.157.82.23 as permitted sender) [email protected]; dkim=pass [email protected] Received: from localhost (localhost [127.0.0.1]) by mail.phyramid.com (Postfix) with ESMTP id ED2BB2017AC for <[email protected]>; Wed, 20 Aug 2014 17:33:23 +0300 (EEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=phyramid.com; h= content-type:content-type:mime-version:x-mailer:subject:subject :message-id:to:from:from:date:date; s=dkim; t=1408545197; x= 1409409197; bh=e04RtoyF7G39lfCvA9LLhTz4nF64siZtN5IYmC18Xsc=; b=o +6mO8Uz4Uf1G4U2q6tKUiEy2N2n/5R2VtPPwIvBE5xzK/hEd2sDGMxVzQVgIDCsK Q0Xh+auPaQpxldQ+AEcL2XSZMrk/g0mJONjkpI19I5AwGIJCR1SVvxdecohTn9iR bCHzrGi2wAicfDBzOH6lUBNfh2thri79aubdCYc97U= X-Amavis-Modified: Mail body modified (using disclaimer) - mail.phyramid.com X-Virus-Scanned: Debian amavisd-new at mail.phyramid.com Received: from mail.phyramid.com ([127.0.0.1]) by localhost (mail.phyramid.com [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id 3JcgXZAXeFtX for <[email protected]>; Wed, 20 Aug 2014 17:33:17 +0300 (EEST) Received: from whiterock.local (unknown [109.98.21.30]) by mail.phyramid.com (Postfix) with ESMTPSA id 05CAE200280 for <[email protected]>; Wed, 20 Aug 2014 17:33:15 +0300 (EEST) Date: Wed, 20 Aug 2014 17:34:15 +0300 From: Company Mail <[email protected]> To: [email protected] Message-ID: <[email protected]> Subject: hey there! X-Mailer: Airmail (247) MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline How was your summer? ---- Thanks a lot!

  Read the article

• automation of data format conversion to parent child format

  - by silverkid

  This is an excel sheet which has only a single column filled for each row. (explanation : all CITY categories fall under V21 , all handset categories fall under CityJ and so on ) V21 CITYR CITYJ HandsetS HandsetHW HandsetHA LOWER_AGE<=20 LOWER_AGE>20 SMS_COUNT<=0 RECHARGE_MRP<=122 RECHARGE_MRP>122 SMS_COUNT>0 I need to change this format to a double column format with parent and child category format. therefore the output sheet would be V21 CITYR V21 CITYJ CITYJ HandsetS CITYJ HandsetHW CITYJ HandsetHA HandsetHA LOWER_AGE<=20 HandsetHA LOWER_AGE>20 LOWER_AGE>20 SMS_COUNT<=0 SMS_COUNT<=0 RECHARGE_MRP<=122 SMS_COUNT<=0 RECHARGE_MRP>122 LOWER_AGE>20 SMS_COUNT>0 the datas are huge so i cant do them manually . how can i automate this ?

  Read the article

• getting rid of filesort on WordPress MySQL query

  - by Hans

  An instance of WordPress that I manage goes down about once a day due to this monster MySQL query taking far too long: SELECT SQL_CALC_FOUND_ROWS distinct wp_posts.* FROM wp_posts LEFT JOIN wp_term_relationships ON (wp_posts.ID = wp_term_relationships.object_id) LEFT JOIN wp_term_taxonomy ON wp_term_taxonomy.term_taxonomy_id = wp_term_relationships.term_taxonomy_id LEFT JOIN wp_ec3_schedule ec3_sch ON ec3_sch.post_id=id WHERE 1=1 AND wp_posts.ID NOT IN ( SELECT tr.object_id FROM wp_term_relationships AS tr INNER JOIN wp_term_taxonomy AS tt ON tr.term_taxonomy_id = tt.term_taxonomy_id WHERE tt.taxonomy = 'category' AND tt.term_id IN ('1050') ) AND wp_posts.post_type = 'post' AND (wp_posts.post_status = 'publish') AND NOT EXISTS (SELECT * FROM wp_term_relationships JOIN wp_term_taxonomy ON wp_term_taxonomy.term_taxonomy_id = wp_term_relationships.term_taxonomy_id WHERE wp_term_relationships.object_id = wp_posts.ID AND wp_term_taxonomy.taxonomy = 'category' AND wp_term_taxonomy.term_id IN (533,3567) ) AND ec3_sch.post_id IS NULL GROUP BY wp_posts.ID ORDER BY wp_posts.post_date DESC LIMIT 0, 10; What do I have to do to get rid of the very slow filesort? I would think that the multicolumn type_status_date index would be fast enough. The EXPLAIN EXTENDED output is below. +----+--------------------+-----------------------+--------+-----------------------------------+------------------+---------+---------------------------------------------------------------------------------+------+----------------------------------------------+ | id | select_type | table | type | possible_keys | key | key_len | ref | rows | Extra | +----+--------------------+-----------------------+--------+-----------------------------------+------------------+---------+---------------------------------------------------------------------------------+------+----------------------------------------------+ | 1 | PRIMARY | wp_posts | ref | type_status_date | type_status_date | 124 | const,const | 7034 | Using where; Using temporary; Using filesort | | 1 | PRIMARY | wp_term_relationships | ref | PRIMARY | PRIMARY | 8 | bwog_wordpress_w.wp_posts.ID | 373 | Using index | | 1 | PRIMARY | wp_term_taxonomy | eq_ref | PRIMARY | PRIMARY | 8 | bwog_wordpress_w.wp_term_relationships.term_taxonomy_id | 1 | Using index | | 1 | PRIMARY | ec3_sch | ref | post_id_index | post_id_index | 9 | bwog_wordpress_w.wp_posts.ID | 1 | Using where; Using index | | 3 | DEPENDENT SUBQUERY | wp_term_taxonomy | range | PRIMARY,term_id_taxonomy,taxonomy | term_id_taxonomy | 106 | NULL | 2 | Using where | | 3 | DEPENDENT SUBQUERY | wp_term_relationships | eq_ref | PRIMARY,term_taxonomy_id | PRIMARY | 16 | bwog_wordpress_w.wp_posts.ID,bwog_wordpress_w.wp_term_taxonomy.term_taxonomy_id | 1 | Using index | | 2 | DEPENDENT SUBQUERY | tt | const | PRIMARY,term_id_taxonomy,taxonomy | term_id_taxonomy | 106 | const,const | 1 | | | 2 | DEPENDENT SUBQUERY | tr | eq_ref | PRIMARY,term_taxonomy_id | PRIMARY | 16 | func,const | 1 | Using index | +----+--------------------+-----------------------+--------+-----------------------------------+------------------+---------+---------------------------------------------------------------------------------+------+----------------------------------------------+ 8 rows in set, 2 warnings (0.05 sec) And CREATE TABLE: CREATE TABLE `wp_posts` ( `ID` bigint(20) unsigned NOT NULL auto_increment, `post_author` bigint(20) unsigned NOT NULL default '0', `post_date` datetime NOT NULL default '0000-00-00 00:00:00', `post_date_gmt` datetime NOT NULL default '0000-00-00 00:00:00', `post_content` longtext NOT NULL, `post_title` text NOT NULL, `post_excerpt` text NOT NULL, `post_status` varchar(20) NOT NULL default 'publish', `comment_status` varchar(20) NOT NULL default 'open', `ping_status` varchar(20) NOT NULL default 'open', `post_password` varchar(20) NOT NULL default '', `post_name` varchar(200) NOT NULL default '', `to_ping` text NOT NULL, `pinged` text NOT NULL, `post_modified` datetime NOT NULL default '0000-00-00 00:00:00', `post_modified_gmt` datetime NOT NULL default '0000-00-00 00:00:00', `post_content_filtered` text NOT NULL, `post_parent` bigint(20) unsigned NOT NULL default '0', `guid` varchar(255) NOT NULL default '', `menu_order` int(11) NOT NULL default '0', `post_type` varchar(20) NOT NULL default 'post', `post_mime_type` varchar(100) NOT NULL default '', `comment_count` bigint(20) NOT NULL default '0', `robotsmeta` varchar(64) default NULL, PRIMARY KEY (`ID`), KEY `post_name` (`post_name`), KEY `type_status_date` (`post_type`,`post_status`,`post_date`,`ID`), KEY `post_parent` (`post_parent`), KEY `post_date` (`post_date`), FULLTEXT KEY `post_related` (`post_title`,`post_content`) )

  Read the article

• SQL Server 2005 stored procedure error

  - by user1670625

  I have created a stored procedure of insert command for employee details in SQL Server 2005 in which one of the parameters is an image for which I have used varbinary as the datatype in the table.. But when I am adding that parameter in the stored procedure I am getting the following error- Implicit conversion from data type varchar to varbinary is not allowed. Use the CONVERT function to run this query. Stored procedure: ( @Employee_ID nvarchar(10)='', @Password nvarchar(10)='', @Security_Question nvarchar(50)='', @Answer nvarchar(50)='', @First_Name nvarchar(20)='', @Middle_Name nvarchar(20)='', @Last_Name nvarchar(20)='', @Employee_Type nvarchar(15)='', @Department nvarchar(15)='', @Photo varbinary(50)='' ) insert into Registration ( Employee_ID, Password, Security_Question, Answer, First_Name, Middle_Name, Last_Name, Employee_Type, Department, Photo ) values ( @Employee_ID, @Password, @Security_Question, @Answer, @First_Name, @Middle_Name, @Last_Name, @Employee_Type, @Department, @Photo ) Table structure: Column Name Data Type Allow Nulls Employee_ID nvarchar(10) Unchecked Password nvarchar(10) Checked Security_Question nvarchar(50) Checked Answer nvarchar(50) Checked First_Name nvarchar(20) Checked Middle_Name nvarchar(20) Checked Last_Name nvarchar(20) Checked Employee_Type nvarchar(15) Checked Department nvarchar(15) Checked Photo varbinary(50) Checked I am not getting what to do..can anyone give me some suggestion or solution? Thanks in advance.

  Read the article

• Issue using Python to solve the Coin problem [closed]

  - by challarao

  I'm attempting to solve a problem commonly known as the Coin problem, but using McNuggets. McNuggets come in boxes containing either 6, 9, or 20 nuggets. I want to write a python script that uses Diophantine equations to determine if a given number of McNuggets n can be exactly purchased in these groupings. For example: 26 McNuggets -- Possible: 1 6-pack, 0 9-packs, 1 20-pack 27 McNuggets -- Possible: 0 6-packs, 3 9-packs, 0 20-packs 28 McNuggets -- Not possible This is my current attempt at writing the solution in Python, but the output is incorrect and I'm not sure what's wrong. n=input("Enter the no.of McNuggets:") a,b,c=0,0,0 count=0 for a in range(n): if 6*a+9*b+20*c==n: count=count+1 break else: for b in range(n): if 6*a+9*b+20*c==n: count=count+1 break else: for c in range(n): if 6*a+9*b+20*c==n: count=count+1 break if count>0: print "It is possible to buy exactly",n,"packs of McNuggetss",a,b,c else: print "It is not possible to buy"

  Read the article

• connecting to a network using route command

  - by ami

  I have a computer with an external IP(192.168.223.220) and also an internal address (10.1.1.20) in order to connect to some servers that don't have external addresses only 10.1.1.xx . in order to connect to these servers from other machines I used the following command "route ADD 10.1.1.0 MASK 255.255.255.0 192.168.223.220" and than I was able to connect to the servers using there 10.1.1.xx address. The problem is that the hard disk of main server(192.168.223.220) died and was replaced and after the that I am not able to connect to the servers as before, the route command succeeds and I can ping 10.1.1.20 but not the other servers. Thanks I am using Windows XP and the print outs are D:\AurosHome\Scriptsipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : N100-master Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Ethernet adapter Local Area Connection 3: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 Physical Address. . . . . . . . . : 00-30-48-34-BA-B9 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 192.168.225.180 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.225.254 DNS Servers . . . . . . . . . . . : 192.168.225.2 Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Intel(R) PRO/1000 EB Network Connection with I/O Acceleration Physical Address. . . . . . . . . : 00-30-48-34-BA-B8 Dhcp Enabled. . . . . . . . . . . : No IP Address. . . . . . . . . . . . : 10.1.1.20 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Mellanox IPoIB Adapter Physical Address. . . . . . . . . : 00-02-C9-25-34-0D D:\AurosHome\Scriptsroute print Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...00 30 48 34 ba b9 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration #2 - Packet Sche duler Miniport 0x3 ...00 30 48 34 ba b8 ...... Intel(R) PRO/1000 EB Network Connection with I/O Acceleration - Packet Schedul er Miniport 0x10005 ...00 02 c9 25 34 0d ...... Mellanox IPoIB Adapter - Packet Scheduler Miniport =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.225.254 192.168.225.180 10 10.1.1.0 255.255.255.0 10.1.1.20 10.1.1.20 10 10.1.1.20 255.255.255.255 127.0.0.1 127.0.0.1 10 10.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 10 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.225.0 255.255.255.0 192.168.225.180 192.168.225.180 10 192.168.225.180 255.255.255.255 127.0.0.1 127.0.0.1 10 192.168.225.255 255.255.255.255 192.168.225.180 192.168.225.180 10 224.0.0.0 240.0.0.0 10.1.1.20 10.1.1.20 10 224.0.0.0 240.0.0.0 192.168.225.180 192.168.225.180 10 255.255.255.255 255.255.255.255 10.1.1.20 10.1.1.20 1 255.255.255.255 255.255.255.255 10.1.1.20 10005 1 255.255.255.255 255.255.255.255 192.168.225.180 192.168.225.180 1 Default Gateway: 192.168.225.254 Persistent Routes: None

  Read the article

• Why does this Javascript work in FF3.6? new Date("2010-06-09T19:20:30+01:00");

  - by thegaw

  Here's the sample code: var d = new Date("2010-06-09T19:20:30+01:00"); document.write(d); On FF3.6 this will give you: Wed Jun 09 2010 14:20:30 GMT-0400 (EST) Other browers tested; Chrome 5, Safari 4, IE7 give: Invalid Date I know there is limited to no support for ISO8601 dates, but does anyone know what and/or where the difference is in FF3.6 that allows this to work? My thought is that FF is just stripping out what it doesn't understand while the others are not. Has anyone else seen this and/or getting different results from the test script?

  Read the article

• mod_mono 'Service Temporarily Unavailable' issue

  - by Charlie Somerville

  I've deployed an ASP.NET web application on a Linux (Debian) server running Apache 2.2 and mod_mono 1.9 It's working well, however Mono occasionally segfaults and uses the entire CPU which causes the website to stop working and display 'Service Temporarily Unavailable' Killing mono fixes it, but obviously this isn't a good solution. I tailed the system log after this happened and I saw the following error messages from the kernel: Apr 20 01:49:37 charliesomerville kernel: [1596436.204158] mono[17909]: segfault at b645f671 ip b645f671 sp b4ffb604 error 4<6>mono[19047]: segfault at b645f66e ip b645f66e sp b4bf7604 error 4<6>mono[18017]: segfault at b645f66e ip b645f66e sp b52fe604 error 4<6>mono[19668]: segfault at b645f5e6 ip b645f5e6 sp b48f4604 error 4<6>mono[22565]: segfault at b645f674 ip b645f674 sp b45f1604 error 4<6>mono[17700]: segfault at b645f661 ip b645f661 sp b51fd604 error 4<6>mono[19596]: segfault at b645f5e6 ip b645f5e6 sp b49f5604 error 4 Apr 20 01:49:37 charliesomerville kernel: [1596436.208172] mono[23219]: segfault at b645f66e ip b645f66e sp b44f0604 error 4 At the end of Apache's error.log are the following errors: [Tue Apr 20 03:10:23 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 [Tue Apr 20 03:10:23 2010] [error] Command stream corrupted, last command was 1 System.ArgumentNullException: null key Parameter name: key at System.Collections.Hashtable.get_Item (System.Object key) [0x00000] at System.Runtime.Serialization.SerializationCallbacks.GetSerializationCallbacks (System.Type t) [0x00000] at System.Runtime.Serialization.ObjectManager.RaiseOnDeserializingEvent (System.Object obj) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectContent (System.IO.BinaryReader reader, System.Runtime.Serialization.Formatters.Binary.TypeMetadata metadata, Int64 objectId, System.Object& objectInstance, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectInstance (System.IO.BinaryReader reader, Boolean isRuntimeObject, Boolean hasTypeInfo, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObject (BinaryElement element, System.IO.BinaryReader reader, System.Int64& objectId, System.Object& value, System.Runtime.Serialization.SerializationInfo& info) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadNextObject (System.IO.BinaryReader reader) [0x00000] at System.Runtime.Serialization.Formatters.Binary.ObjectReader.ReadObjectGraph (System.IO.BinaryReader reader, Boolean readHeaders, System.Object& result, System.Runtime.Remoting.Messaging.Header[]& headers) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.NoCheckDeserialize (System.IO.Stream serializationStream, System.Runtime.Remoting.Messaging.HeaderHandler handler) [0x00000] at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize (System.IO.Stream serializationStream) [0x00000] at System.Runtime.Remoting.Channels.CADSerializer.DeserializeObject (System.IO.MemoryStream mem) [0x00000] at System.Runtime.Remoting.RemotingServices.GetDomainProxy (System.AppDomain domain) [0x00000] at System.AppDomain.CreateDomain (System.String friendlyName, System.Security.Policy.Evidence securityInfo, System.AppDomainSetup info) [0x00000] at System.Web.Hosting.ApplicationHost.CreateApplicationHost (System.Type hostType, System.String virtualDir, System.String physicalDir) [0x00000] at Mono.WebServer.VPathToHost.CreateHost (Mono.WebServer.ApplicationServer server, Mono.WebServer.WebSource webSource) [0x00000] at Mono.WebServer.ApplicationServer.GetApplicationForPath (System.String vhost, Int32 port, System.String path, Boolean defaultToRoot) [0x00000] at (wrapper remoting-invoke-with-check) Mono.WebServer.ApplicationServer:GetApplicationForPath (string,int,string,bool) at Mono.WebServer.ModMonoWorker.GetOrCreateApplication (System.String vhost, Int32 port, System.String filepath, System.String virt) [0x00000] at Mono.WebServer.ModMonoWorker.InnerRun (System.Object state) [0x00000] at Mono.WebServer.ModMonoWorker.Run (System.Object state) [0x00000] [Tue Apr 20 03:10:26 2010] [error] (70014)End of file found: read_data failed [Tue Apr 20 03:10:26 2010] [error] Command stream corrupted, last command was -1 Along with the above errors, Apache's error.log is packed with hundreds (if not thousands) of the following error: Maximum number (20) of concurrent mod_mono requests to /tmp/mod_mono_dashboard_default_2.lock reached. Droping request. At the moment, I'm thinking there might be something wrong with configuration here (it's basically running on out-of-the-box config)

  Read the article

• Hanging of host network connections when starting KVM guest on bridge

  - by Chris Phillips

  Hi, I've a KVM system upon which I'm running a network bridge directly between all VM's and a bond0 (eth0, eth1) on the host OS. As such, all machines are presented on the same subnet, available outside of the box. The bond is doing mode 1 active / passive, with an arp_ip_target set to the default gateway, which has caused some issues in itself, but I can't see the bond configs mattering here myself. I'm seeing odd things most times when I stop and start a guest on the platform, in that on the host I lose network connectivity (icmp, ssh) for about 30 seconds. I don't lose connectivity on the other already running VM's though... they can always ping the default GW, but the host can't. I say "about 30 seconds" but from some tests it actually seems to be 28 seconds usually (or at least, I lose 28 pings...) and I'm wondering if this somehow relates to the bridge config. I'm not running STP on the bridge at all, and the forwarding delay is set to 1 second, path cost on the bond0 lowered to 10 and port priority of bond0 also lowered to 1. As such I don't think that the bridge should ever be able to think that bond0 is not connected just fine (as continued guest connectivity implies) yet the IP of the host, which is on the bridge device (... could that matter?? ) becomes unreachable. I'm fairly sure it's about the bridged networking, but at the same time as this happens when a VM is started there are clearly loads of other things also happening so maybe I'm way off the mark. Lack of connectivity: # ping 10.20.11.254 PING 10.20.11.254 (10.20.11.254) 56(84) bytes of data. 64 bytes from 10.20.11.254: icmp_seq=1 ttl=255 time=0.921 ms 64 bytes from 10.20.11.254: icmp_seq=2 ttl=255 time=0.541 ms type=1700 audit(1293462808.589:325): dev=vnet6 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.604:326): dev=vnet7 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 type=1700 audit(1293462808.618:327): dev=vnet8 prom=256 old_prom=0 auid=42949672 95 ses=4294967295 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x130079 kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0xc1 data 0xffdd694a kvm: 14116: cpu0 unimplemented perfctr wrmsr: 0x186 data 0x530079 64 bytes from 10.20.11.254: icmp_seq=30 ttl=255 time=0.514 ms 64 bytes from 10.20.11.254: icmp_seq=31 ttl=255 time=0.551 ms 64 bytes from 10.20.11.254: icmp_seq=32 ttl=255 time=0.437 ms 64 bytes from 10.20.11.254: icmp_seq=33 ttl=255 time=0.392 ms brctl output of relevant bridge: # brctl showstp brdev brdev bridge id 8000.b2e1378d1396 designated root 8000.b2e1378d1396 root port 0 path cost 0 max age 19.99 bridge max age 19.99 hello time 1.99 bridge hello time 1.99 forward delay 0.99 bridge forward delay 0.99 ageing time 299.95 hello timer 0.50 tcn timer 0.00 topology change timer 0.00 gc timer 0.04 flags vnet5 (3) port id 8003 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8003 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags vnet0 (2) port id 8002 state forwarding designated root 8000.b2e1378d1396 path cost 100 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 8002 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags bond0 (1) port id 0001 state forwarding designated root 8000.b2e1378d1396 path cost 10 designated bridge 8000.b2e1378d1396 message age timer 0.00 designated port 0001 forward delay timer 0.00 designated cost 0 hold timer 0.00 flags I do see the new port listed as learning, but in line with the forward delay, only for 1 or 2 seconds when polling the brctl output on a loop. All pointers, tips or stabs in the dark appreciated.

  Read the article

• Adobe Coldfusion Railo OpenBD Apache Tomcat Multiple Sites

  - by chris hough

  Here's what I am trying to do, unless I am crazy: I am trying to use Tomcat with the multiple workers, so far I got OpenBD working, but having trouble with Railo, and will be tackling Adobe after. each engine deployed as a war separated by different workers I wanted to keep both the sites and engines inside my sites directory I have to remap the symlink for the WEB-INF when I switch engines = have not found a way around this my thought is to have everything separated into modules and I want to be able to execute both cfm and php code in a single site.  Ideally, it would be amazing if there would be a way to not have to remap the symlink as well. thoughts? can this be done? I am trying to mimic how this would be setup on a live server, not using eclipse for example. here is what I am working with so far: my apache workers.properties worker.list=openbd, openbdadmin, railo, railoadmin  worker.openbd.type=ajp13  worker.openbd.host=local.mydev.openbd  worker.openbd.port=8009 worker.openbdadmin.type=ajp13  worker.openbdadmin.host=local.admin.openbd worker.openbdadmin.port=8009   worker.railo.type=ajp13  worker.railo.host=local.mydev.railo  worker.railo.port=8009 worker.railoadmin.type=ajp13  worker.railoadmin.host=local.admin.railo worker.railoadmin.port=8009   my tomcat servers.xml < Host name="local.admin.openbd" appBase="/Users/[myusername]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="openbd/" reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host        < Host name="local.admin.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false"        < Context path="" docBase="railo/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host < Host name="local.mydev.openbd"   appBase="/Users/[my username]/Websites/coldfusion.engines" unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true"< /Context < /Host < Host name="local.mydev.railo"   appBase="/Users/[my username]/Websites/coldfusion.engines"  unpackWARs="false" autoDeploy="true" xmlValidation="true" xmlNamespaceAware="false" < Context path="" docBase="/Users/[my username]/Websites/example.mydev/wwwroot/"  reloadable="true" privileged="true" antiResourceLocking="false" anitJARLocking="false" allowLinking="true" < /Host my apache vhosts ServerName local.admin.openbd DocumentRoot /Users/[my username]/Websites/coldfusion.engines/openBD/ #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbdadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_openbdadmin_error.log" ServerName local.admin.railo DocumentRoot /Users/[my username]/Websites/coldfusion.engines/railo/ #Mount Railo and tell it to only server cfml files JkMount /*.cfm railoadmin ErrorLog "/Users/[my username]/Websites/apache.logs/local_railoadmin_error.log" ServerName local.mydev DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_error.log" ServerName local.mydev.openbd DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot #Mount OpenBD and tell it to only server cfml files JkMount /*.cfm openbd ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_openbd_error.log" ServerName local.mydev.railo DocumentRoot /Users/[my username]/Websites/example.mydev/wwwroot JkMount /*.cfm railo ErrorLog "/Users/[my username]/Websites/apache.logs/local_example_mydev_railo_error.log" my folder structure I am using websites/apache.logs/ websites/coldfusion.engines/ websites/coldfusion.engines/cfusion/ websites/coldfusion.engines/openBD/ websites/coldfusion.engines/railo/ websites/example.mydev/ websites/example.mydev/wwwroot/ websites/example.mydev/wwwroot/index.cfm   websites/example.mydev/wwwroot/index.htm   websites/example.mydev/wwwroot/index.php   error log output [Thu Aug 27 00:54:50.443 2009] [11279:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:54:51.346 2009] [11280:2686719776] [info] init_jk::mod_jk.c (3183): mod_jk/1.2.28 initialized [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:18.963 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (openbdadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (openbdadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (openbdadmin) connecting to tomcat failed. [Thu Aug 27 00:55:19.063 2009] [11284:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=openbdadmin [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.377 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=1) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_open_socket::jk_connect.c (594): connect to 127.0.0.1:8009 failed (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_connect_to_endpoint::jk_ajp_common.c (922): Failed opening socket to (127.0.0.1:8009) (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_send_request::jk_ajp_common.c (1507): (railoadmin) connecting to backend failed. Tomcat is probably not started or is listening on the wrong port (errno=61) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] ajp_service::jk_ajp_common.c (2447): (railoadmin) sending request to tomcat failed (recoverable), because of error during request sending (attempt=2) [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [error] ajp_service::jk_ajp_common.c (2466): (railoadmin) connecting to tomcat failed. [Thu Aug 27 00:55:20.477 2009] [11283:2686719776] [info] jk_handler::mod_jk.c (2615): Service error=-3 for worker=railoadmin

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >