Search Results

Search found 3515 results on 141 pages for 'energy saving'.

Page 25/141 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

• Netbook performs hard shutdown without warning on low battery power

  - by Steve Kroon

  My Asus EEE netbook performs a hard shutdown when it reaches low battery power, without giving any warning - i.e. the power just goes off, without any shutdown process. I can't find anything in the syslog, and no error messages are printed before it happens. I've had this problem on previous (K)Ubuntu versions, and hoped updating to Ubuntu Precise would help resolve the issue, but it hasn't. The option in the Power application for "when power is critically low" is currently blank - the only options are a (grayed-out) hibernate and "Power off". I have re-installed indicator-power to no effect. The time remaining reported by acpi is unstable, as is the time remaining reported by gnome-power-statistics. (For example, running acpi twice in succession, I got 2h16min, and then 3h21min remaining. These sorts of jumps in the remaining time are also in the gnome-power-statistics graphs.) It might be possible to write a script to give me advance warning (as per @RanRag's comment below), but I would prefer to isolate why I don't get a critical battery notification from the system before this happens, so that I can take action as appropriate (suspend/shutdown/plug in power) when I get a notification. Some additional information on the battery: kroon@minia:~$ upower -i /org/freedesktop/UPower/devices/battery_BAT0 native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/PNP0C0A:00/power_supply/BAT0 vendor: ASUS model: 1005P power supply: yes updated: Fri Aug 17 07:31:23 2012 (9 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: charging energy: 33.966 Wh energy-empty: 0 Wh energy-full: 34.9272 Wh energy-full-design: 47.52 Wh energy-rate: 3.7692 W voltage: 12.61 V time to full: 15.3 minutes percentage: 97.248% capacity: 73.5% technology: lithium-ion History (charge): 1345181483 97.248 charging 1345181453 97.155 charging 1345181423 97.062 charging 1345181393 96.970 charging History (rate): 1345181483 3.769 charging 1345181453 3.899 charging 1345181423 4.061 charging 1345181393 4.201 charging kroon@minia:~$ cat /proc/acpi/battery/BAT0/state present: yes capacity state: ok charging state: charging present rate: 332 mA remaining capacity: 3149 mAh present voltage: 12612 mV kroon@minia:~$ cat /proc/acpi/battery/BAT0/info present: yes design capacity: 4400 mAh last full capacity: 3209 mAh battery technology: rechargeable design voltage: 10800 mV design capacity warning: 10 mAh design capacity low: 5 mAh cycle count: 0 capacity granularity 1: 44 mAh capacity granularity 2: 44 mAh model number: 1005P serial number: battery type: LION OEM info: ASUS

  Read the article

• Do we have enough time to build an electric car future?

  - by julien.groues

  A recent article from Greenbang has posed the question 'Do we have enough time to build an electric car future?'. The writer discusses that, although the future of transport might lie with electric cars, there is concern regarding whether we'll be able to build the market and infrastructure required to support them, before carbon and oil constraints create difficulties in powering the vehicles. Of course, the increasing use of Electric vehicles (EVs) is going to put excessive pressure on energy grids, as large volumes of electricity will need to be directed to charging points, which in turn must handle fluctuating demand at peak times. EVs are increasing in popularity as a sustainable method of transport to reduce carbon consumption, and electric utilities will have the opportunity, and the challenge, to quickly determine the best methods to fuel these vehicles and accommodate the associated increases in demand for energy. Critically, efficient software is required to provide diagnostic and predictive capabilities related to EV refuelling - for example, anticipated electricity flow will need to be addressed as the number of EVs on the road increases, and electricity will need to be directed to specific areas on-demand as vehicles attempt to recharge en-mass. But a smart grid infrastructure can meet these demands, intelligently. The implementation of a smart grid is not in the distant future, it is an achievable reality for utilities via simple installation of new software and technologies, which can be done incrementally for those facing existing legacy systems or concerned with upfront costs. The smart grid is integral to the monitoring and control of energy use as well as the future-proofing of the energy grid. A smart grid will be critical to meeting the electricity requirements of new EVs and will ensure their successful deployment by providing a reliable foundation for the data handling required to record and manage electricity distribution - from recording and assessing energy usage, to analysing data and sharing information with consumers via green billing. http://www.greenbang.com/do-we-have-enough-time-to-build-an-electric-car-future_14248.html

  Read the article

• How to keep balance / Unlock items / achievement rules

  - by Mark Knol

  I'm working on an engine for a game, too learn javascript and just because its fun. I'm a flashdeveloper, I know how to build websites. Now making games is a different challenge, javascript is a challenge, but I'd love to learn how to structure code and what patterns are common. I dont mind if the game ever finish, I'm mostly interested in the programming part of it. I dont have a particular endresult in mind, so I'll see where it takes me. I currently have a system where you can buy items. The items cost a specified amount of gold, silver, diamonds etc. When you have selected and bought the item, it takes time before getting rewarded. When time is over, you are getting rewarded with other properties (gold, energy, diamonds). For example, you can buy an apple for 50gold, It takes a minute, you get rewarded with 75energy. Or if you take a run, it cost 50energy, it takes 5minutes, reward is 25gold and 25silver. These definitions is what i call actions. Currently I already have a system where this already works and I can define as much actions with as much properties as I want. The definitions I have kinda looks like this: {id:101, category:544, onInit:{gold:-75}, onComplete:{energy:75}, time:2000, name:"Apple", locked: false} {id:102, category:544, onInit:{gold:-135}, onComplete:{energy:145}, time:2000, name:"Banana", locked: false} {id:106, category:302, onInit:{energy:-50, power: -25}, onComplete:{gold:100, diamonds:2}, time:10000, name:"Run", locked: false} {id:107, category:302, onInit:{energy:-70, silver: -55}, onComplete:{gold:100}, time:10000, name:"Dance", locked: false} {id:108, category:302, onInit:{energy:-230, power: -355}, onComplete:{gold:70, silver:70}, time:10000, name:"Fitness", locked: false} Now, I would love to add a system where I can lock/unlock the actions using achievement rules. Lets say, if you buy 10 apples, you unlock a new action, like bananas which cost more, and reward more. In the future I maybe want to restrict achievements and actions to levels. I am kinda stuck how to structure this. I have 2 questions: Which patterns are used to define achievements? How/where are they defined? Should it be part of the action, or should it be a separate controller? Is it a good idea to register all completed actions to it? I think I want multiple types of achievement rules, Id love to hear some ideas how to develop it. How do you create/find a good balance, so the user does not get stuck or can cheat by repeat a pattern of actions to get too much rewards. I know there is not a simple answer and i'm lacking of a good game-concept, but I wonder if anyone created such a game and how you dealed and played with it.

  Read the article

• Will Online Learning Save Higher Education (and does it need saving)?

  - by user739873

  A lot (an awful lot) of education industry rag real estate has been devoted to the topics of online learning, MOOC’s, Udacity, edX, etc., etc. and to the uninitiated you’d think that the education equivalent of the cure for cancer had been discovered. There are certainly skeptics (whose voice is usually swiftly trampled upon by the masses) who feel we could over steer and damage or destroy something vital to teaching and learning (i.e. the classroom experience and direct interaction with human beings known as instructors), but for the most part prevailing opinion seems to be that online learning will take over the world and that higher education will never be the same. Now I’m sure that since you all know I work for a technology company you think I’m going to come down hard on the side of online learning proselytizers. Yes, I do believe that this revolution can and will provide access to massive numbers of individuals that either couldn’t afford (from a fiscal or time perspective) a traditional education, and that in some cases the online modality will actually be an improvement over certain traditional forms (such as courses taught by an adjunct or teaching assistant that has no business being a teacher). But I think several things need immediate attention or we’re likely to get so caught up in the delivery that we miss some of the real issues (and opportunities) around online learning. First and foremost, we’ve got to give some thought to how traditional information systems are going to accommodate thousands (possibly hundreds of thousands) of individual students each taking courses from many, many different “deliverers” with an expectation that successful completion of these courses will result in credit at many or most institutions. There’s also a huge opportunity to refine the delivery platform (no, LMS is not a commodity when you are talking about online delivery being your sole mode of operation) as well as the course itself by mining all kinds of data from the interactions that the students have with the material each time they take it. Social data analytics tools will be key in achieving this goal. What about accreditation (badging or competencies vs. traditional degrees)? And again, will the information systems in place today adapt to changes in this area fast enough? The type of scale that this shift in learning could drive has the potential to abruptly overwhelm just about every system in place today in higher education. I would like to (with a not so gentle reminder) refer you back to a blog entry I wrote when I first stepped into my current role at Oracle in which I talked about how higher ed needs an “Oracle” more than at any other time in it’s evolution (despite the somewhat mercantilist reputation it has in some circles). There just aren’t that many organizations that can deliver the kinds of solutions “at scale” that this brave new world of online education will demand. The future may be closer than we think. Cole

  Read the article

• On-demand Webcast: Java in the Smart Grid

  - by Jacob Lehrbaum

  The Smart Grid is one of the most significant evolutions of our utility infrastructure in recent history. This innovative grid will soon revolutionize how utilities manage and control the energy in our homes--helping utilities reduce energy usage during peak hours, improve overall energy efficiency, and lower your energy bills. If you'd like to learn more about the Smart Grid and the role that Java is poised to play in this important initiative you can check out our on-demand webcast. We'll show you how Java solutions--including Java ME and Java SE for Embedded --can help build devices and infrastructure that take advantage of this new market. As the world's most popular developer language, Java enables you to work with a wide range of developers and provides access to tools and resources to build smarter devices, faster and more affordably.

  Read the article

• Why is this beat detection code failing to register some beats properly?

  - by Quincy

  I made this SoundAnalyzer class to detect beats in songs: class SoundAnalyzer { public SoundBuffer soundData; public Sound sound; public List<double> beatMarkers = new List<double>(); public SoundAnalyzer(string path) { soundData = new SoundBuffer(path); sound = new Sound(soundData); } // C = threshold, N = size of history buffer / 1024 B = bands public void PlaceBeatMarkers(float C, int N, int B) { List<double>[] instantEnergyList = new List<double>[B]; GetEnergyList(B, ref instantEnergyList); for (int i = 0; i < B; i++) { PlaceMarkers(instantEnergyList[i], N, C); } beatMarkers.Sort(); } private short[] getRange(int begin, int end, short[] array) { short[] result = new short[end - begin]; for (int i = 0; i < end - begin; i++) { result[i] = array[begin + i]; } return result; } // get a array of with a list of energy for each band private void GetEnergyList(int B, ref List<double>[] instantEnergyList) { for (int i = 0; i < B; i++) { instantEnergyList[i] = new List<double>(); } short[] samples = soundData.Samples; float timePerSample = 1 / (float)soundData.SampleRate; int sampleIndex = 0; int nextSamples = 1024; int samplesPerBand = nextSamples / B; // for the whole song while (sampleIndex + nextSamples < samples.Length) { complex[] FFT = FastFourier.Calculate(getRange(sampleIndex, nextSamples + sampleIndex, samples)); // foreach band for (int i = 0; i < B; i++) { double energy = 0; for (int j = 0; j < samplesPerBand; j++) energy += FFT[i * samplesPerBand + j].GetMagnitude(); energy /= samplesPerBand; instantEnergyList[i].Add(energy); } if (sampleIndex + nextSamples >= samples.Length) nextSamples = samples.Length - sampleIndex - 1; sampleIndex += nextSamples; samplesPerBand = nextSamples / B; } } // place the actual markers private void PlaceMarkers(List<double> instantEnergyList, int N, float C) { double timePerSample = 1 / (double)soundData.SampleRate; int index = N; int numInBuffer = index; double historyBuffer = 0; //Fill the history buffer with n * instant energy for (int i = 0; i < index; i++) { historyBuffer += instantEnergyList[i]; } // If instantEnergy / samples in buffer < instantEnergy for the next sample then add beatmarker. while (index + 1 < instantEnergyList.Count) { if(instantEnergyList[index + 1] > (historyBuffer / numInBuffer) * C) beatMarkers.Add((index + 1) * 1024 * timePerSample); historyBuffer -= instantEnergyList[index - numInBuffer]; historyBuffer += instantEnergyList[index + 1]; index++; } } } For some reason it's only detecting beats from 637 sec to around 641 sec, and I have no idea why. I know the beats are being inserted from multiple bands since I am finding duplicates, and it seems that it's assigning a beat to each instant energy value in between those values. It's modeled after this: http://www.flipcode.com/misc/BeatDetectionAlgorithms.pdf So why won't the beats register properly?

  Read the article

• What are the benefits of Android way of "saving memory" - explicitly passing Context objects everywhere?

  - by Sarge Borsch

  Turned out, this question is not easy to formulate for me, but let's try. In Android, pretty much any UI object depends on a Context, and has defined lifetime. It also can destroy and recreate UI objects and even whole application process at any time, and so on. This makes coding asynchronous operations correctly not straightforward. (and sometimes very cumbersome) But I never have seen a real explanation, why it's done that way? There are other OSes, including mobile OSes (iOS, for example), that don't do such things. So, what are the wins of Android way (Activities & Contexts)? Does that allow Android applications to use much less RAM, or maybe there are other benefits?

  Read the article

• Laptop battery charging capacity reduced to 52%

  - by omjaijagdish

  I have been using Ubuntu 11.04 on DELL Inspiron 14R (N5010) laptop for last three months. Before I switch to ubuntu my laptop battery used to give 2.5 hrs to 3 hrs back-up. But since I have been using ubuntu, it has been reduced to 1hr to 1.5 hrs at max. I tried following commands: $ cat /proc/acpi/battery/BAT0/state which gave result as present: yes capacity state: ok charging state: charged present rate: 1 mA remaining capacity: 4400 mAh present voltage: 12407 mV then I tried $ acpi -b the result was.. Battery 0: Unknown, 100% when I gave command as $ upower -i /org/freedesktop/UPower/devices/battery_BAT0 the result was.. native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 model: DELL W7H3N08 serial: 7114 power supply: yes updated: Sat Nov 24 11:25:34 2012 (21 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 48.4748 Wh energy-empty: 0 Wh energy-full: 48.4748 Wh energy-full-design: 48.9595 Wh energy-rate: 0.011017 W voltage: 12.408 V percentage: 100% **capacity: 52.9253%** technology: lithium-ion Someone please let me know, what is going wrong with my laptop? How can I get charging with full capacity?

  Read the article

• Saving more corsor positions (with tput?) in bash terminal

  - by AndreasT

  I know that tput sc saves the current cursor position and tput rc restores it exactly where tput sc was called. The problem is that every time tput sc is called, it overwrites the previous saved position. Is there a way to save more positions, e.g. tput sc pos1 and tput sc pos2 which can be restored with, say, tput rc pos1 and tput rc pos2 respectively? (The solution need not make use of tput, I mentioned it because it's the only command I know that handles cursor position) If not, is there a way to at least save the cursor position locally in a function, so that if a function uses tput sc and then calls another function that runs again tput sc, then each function restores its own saved cursor position when invoking tput rc? Thanks in advance.

  Read the article

• In Magento, how can I preview a page before saving it?

  - by jeremysawesome

  I am using the Magento ver. 1.4.0.1 Community Edition. The problem I am running into is that Magento only allows me to preview pages that I have already saved. This works fine if I am creating a new page - but what if I am editing a current page? I want to be sure that the changes I make look good on the site before saving them. Does anyone know of a way to preview a static cms page before saving the changes made? I'm open to using some sort of plugin if anyone knows of one. Thanks

  Read the article

• What is the proper way to check the previous value of a field before saving an object? (Using Django

  - by anonymous coward

  I have a Django Model with updated_by and an approved_by fields, both are ForeignKey fields to the built-in (auth) User models. I am aware that with updated_by, it's easy enough to simply over-ride the .save() method on the Model, and shove the request.user in that field before saving. However, for approved_by, this field should only ever be filled in when a related field (date_approved) is first filled in. I'm somewhat certain that I can check this logically, and fill in the field if the previous value was empty. What is the proper way to check the previous value of a field before saving an object? I do not anticipate that date_approved will ever be changed or updated, nor should there be any reason to ever update the approved_by entry. UPDATE: Regarding forms/validation, I should have mentioned that none of the fields in question are seen by or editable by users of the site. If I have misunderstood, I'm sorry, but I'm not sure how forms and validation apply to my question.

  Read the article

• Number 0 is not saving to database as a prefix in SQL Server of CHAR data type column

  - by gmhk

  I am trying to insert an value as '019393' into a table with a CHAR(10) column. It is inserting only '19393' into the database I am implementing this feature in a stored procedure, doing some manipulation like incrementing that number by 15 and saving it back with '0' as the prefix I am using SQL Server database Note: I tried CASTING that value as VARCHAR before saving to the database, but even that did not get the solution Code SELECT @fromBSB = fromBSB, @toBSB = toBSB, @type = Type FROM [dbo].[tbl_REF_SpecialBSBRanges] WHERE CAST(@inputFromBSB AS INT) BETWEEN fromBSB AND toBSB SET @RETURNVALUE = @fromBSB IF(@fromBSB = @inputFromBSB) BEGIN PRINT 'Starting Number is Equal'; DELETE FROM tbl_REF_SpecialBSBRanges WHERE Type = @type AND fromBSB = @fromBSB AND toBSB = @toBSB INSERT INTO [tbl_REF_SpecialBSBRanges] ([Type], [fromBSB], [toBSB]) VALUES(@type, CAST('0' + @fromBSB + 1 AS CHAR), @toBSB) INSERT INTO [tbl_REF_SpecialBSBRanges] ([Type], [fromBSB], [toBSB]) VALUES(@inputBSBName, @inputFromBSB, @inputToBSB) END

  Read the article

• Exited Emacs without saving, did it save the file somewhere?

  - by rumtscho

  Hi, I am using Emacs on Windows XP. Had it open to take some notes in a meeting, but forgot to create a file first (the text got created in the usual "scratch" buffer). Then I closed a lot of applications after the meeting, forgetting to save the notes in Emacs :( I know that when I am modifying an existing file, it creates a backup of the old file in the same directory. But I don't know if the information from the scratch buffer is available somewhere after an exit without saving. Do you know if I can restore my information? I haven't shut down/suspended/hybernated the system since, so all temp files should be still accessible.

  Read the article

• Change windows default path or last used path for saving files? Is that possible?

  - by Mark

  I'm trying to change the default saving path to my specfied path for example if the file is picture (.jpg .gif etc..) and using google chrome I save an image the path can be anything from default or last used so I want it to be mine specfied for example I choose "C:\SaveHerePics" I don't know how you can change it maybe Registry? Dll? I would like to create vb.net program with textbox you choose the new location to be located every time for example "C:\SaveHerePics" and it should not have anything to do with this program even if you close the program the default location for pictures saved via any program or source saved to "C:\SaveHerePics" Thanks a lot for your help!

  Read the article

• On saving an new active record, in what order are the associated objects saved?

  - by Bryan

  In rails, when saving an active_record object, its associated objects will be saved as well. But has_one and has_many association have different order in saving objects. I have three simplified models: class Team < ActiveRecord::Base has_many :players has_one :coach end class Player < ActiveRecord::Base belongs_to :team validates_presence_of :team_id end class Coach < ActiveRecord::Base belongs_to :team validates_presence_of :team_id end I expected that when team.save is called, team should be saved before its associated coach and players. I use the following code to test these models: t = Team.new team.coach = Coach.new team.save! team.save! returns true. But in another test: t = Team.new team.players << Player.new team.save! team.save! gives the following error: > ActiveRecord::RecordInvalid: > Validation failed: Players is invalid I figured out that team.save! saves objects in the following order: 1) players, 2) team, and 3) coach. This is why I got the error: When a player is saved, team doesn't yet have a id, so validates_presence_of :team_id fails in player. Can someone explain to me why objects are saved in this order? This seems not logical to me.

  Read the article

• Saving an active record, in what order are the associated objects saved?

  - by Bryan

  In rails, when saving an active_record object, its associated objects will be saved as well. But has_one and has_many association have different order in saving objects. I have three simplified models: class Team < ActiveRecord::Base has_many :players has_one :coach end class Player < ActiveRecord::Base belongs_to :team validates_presence_of :team_id end class Coach < ActiveRecord::Base belongs_to :team validates_presence_of :team_id end I expected that when team.save is called, team should be saved before its associated coach and players. I use the following code to test these models: t = Team.new team.coach = Coach.new team.save! team.save! returns true. But in another test: t = Team.new team.players << Player.new team.save! team.save! gives the following error: > ActiveRecord::RecordInvalid: > Validation failed: Players is invalid I figured out that team.save! saves objects in the following order: 1) players, 2) team, and 3) coach. This is why I got the error: When a player is saved, team doesn't yet have a id, so validates_presence_of :team_id fails in player. Can someone explain to me why objects are saved in this order? This seems not logical to me.

  Read the article

• What is casper rw loop file and why do I need it to make saving persistant on usb flash drive?

  - by l245c4l

  Suppose I've installed linux on my flash drive. Why do I need something like casper loop file to make saving persistant? So files are being erased? Isn't flash drive the same as actual hard drive? I'm linux noob so be patient. Or it is because linux on flash drive is actually live cd on flash drive? Can it be installed just like it is installed on hard drive? Thanks in advance

  Read the article

• How to disable auto "Update Maven Dependencies" after saving a pom.xml?

  - by chrsk

  How to disable auto "Update Maven Dependencies" after saving a pom.xml in Eclipse IDE with m2eclipse Plugin? 16.04.10 11:09:40 MESZ: Refreshing [/project/pom.xml] 16.04.10 11:09:40 MESZ: Maven Builder: AUTO_BUILD

  Read the article

• How can I generate zip file without saving to the disk with Ruby?

  - by flutedemetan

  I have generated many pdf files in memory and I want to compress them into one zip file before sending it as a email attachment. I have looked at Rubyzip and it does not allows me to create a zip file without saving it to disk (maybe I am wrong). Is there any way I can compress those file without creating a temp file ?

  Read the article

• show error like gmail if user closed the window without saving.

  - by RICH KID SMART KID

  how i can do this. if user want to closed his window without saving then show a confirm error that "are you really want to closed the window". how i can do this

  Read the article

• Help with saving or adding more than 4000 words to a list in memory in C#.net

  - by Jepe d Hepe

  I need help with my application where i save a bunch of words like more than 4000 words or more in a List<[class name]. My problem is, as the number of words increases, the process in saving it in the list seems to go slower and the application uses a lot more of memory. Can you give me an advise or alternative to do this without affecting the speed of the process?

  Read the article

• Core data and saving the context in subViewControllers, ok to release?

  - by Shizam

  When updating the managedObjectContext is it ok practice to do the save setup in view controllers that may be released or should the appDelegate handle the saving of the managedObjectContext so that even if the viewController is released the save finishes? Thanks, Sam

  Read the article

• How to speed up saving data to database over internet?

  - by robert_d

  I am using C#, Entity Framework and SQL Server 2008 Express. I am connected to the database over internet. What is the best method to speed up saving/updating data to database? It takes 60 seconds to save 140 records to database.

  Read the article

• Cooling Server Rack with Water? Sensible? Reuse energy for small installation?

  - by TomTom

  First - this is not a shopping question, this is not so much about concrete prices but about general feasibility. Makes no sense to get looking fo ra manufacturer it the approach is bad. I am moving my company to new Offices in September, and among them we will expand and consolidate our number crunch cluster. It is so far in a data center. I have a nice room in the basement prepared now. I think about cooling. We will likely run up a power usage of around 10kw by end of the year. That is a LOT of stuff, and cooling will be expensive. I am located in south Poland, close to the German border. This is an area where water is available for relatively cheap price - "wasting water" is not a concern here. My situation is thus a lot different for example than in Spain ;) Physics tells me that to heat 1 liter of water by 1 degree I use 1 Calorie (1KCal), and a kwh power is (and we can assume 100% efficiency - water heaters are pretty efficient) 750 Calories. That means that 1 KWH is 750 liter by 1 degree. 10kw and a 20 degree heat would mean that per hour I need 375 liters. That is 6.25 liters per minute and not WHAT much ;) We talk 270 cubic meters here. Even in summer, the significant underground pipes really cool down the water a LOT more ;) Question: This such an approach feasible? Anyone done that? We talk of a 10kw installation for now. Is it feasible to reuse that heat? The alternative is a decent cooling system that WILL use around 2.5kwh for running. Dropping the water would basically (a) get me a quite cold input compared to the outside air even in summer (I.e. a lower temperature medium to drop the heat in) and (b) replace the need to actually have the outside cooling (which may b problematic - if the air is 22 degree, that is a LOT to fight off, but OTOH the water will be quite cold). I also would possibly save the investment for the outside part of the cooling circuit. Now, second question - is there a feasible way to heat a house with that? ;) After all, brutally speaking, it is a LOT of energy in that water ;) If it is a bad idea, I stop here - if it is not, I start looking for suppliers. Maybe my math is wrong?

  Read the article

• Convert filenames to their checksum before saving to prevent duplicates. Is is a smart thing to do?

  - by Xananax

  TL;DR:what the title says I am developing some sort of image board in PHP. I was thinking of changing each image's filename to it's checksum prior to saving it. This way, I might be able to prevent duplicates. I know this wouldn't work for two images that are the same but differ in size or level of compression or whatnot, but this method would allow for an early check. What bugs me is that I never saw this method implemented anywhere, so I was wondering if there is a catch to it. Maybe it is just more efficient to keep the original filename and store the hash in DB? Maybe the whole method is just not useful and my question is moot? What do you think? On a side note, I don't really get how hashes are calculated so I was wondering, if my first question checks out, if it would be possible to calculate the likeness that two images are similar by comparing hashes (levenshtein or something of the sort).

  Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >