rails routing - Page 25

Cisco Routing through VPN

- by Superman

I am looking for a way to allow a client Win7 computer, which connects to our California office's Cisco ASA 5510 over an IPSec VPN connection to then be able to connect to a computer in our chicago office which is itself connected through another Cisco ASA router to california. It appears that we are unable to route client vpn connections between each other, and I cannot find any guidance on how to enable this. Let me know if this is possible / what needs to be done.

Read the article

IPv6 works only after ping to routing box

- by Ficik

Situation: There is ipv4 only router in network and every computer is connected to it (wifi or cable). Server with ipv4 and ipv6 is connected to this router as well. Server has configured tunnelbrokers 6to4 tunnel and radvd. Clients in network has right prefix and can ping each other. But they can't ping to internet until they ping Server (the one with tunnel). I found somewhere that it's icmp problem, but I couldn't find solution. Is it problem that there is ipv4 only router? server and client runs linux router runs dd-wrt without ipv6 support :( Ping try: standa@standa-laptop:~$ ping6 ipv6.google.com PING ipv6.google.com(2a00:1450:8007::69) 56 data bytes ^C --- ipv6.google.com ping statistics --- 29 packets transmitted, 0 received, 100% packet loss, time 28223ms standa@standa-laptop:~$ ping6 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478 PING 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478(2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478) 56 data bytes 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=1 ttl=64 time=3.55 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=2 ttl=64 time=0.311 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=3 ttl=64 time=0.269 ms 64 bytes from 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478: icmp_seq=4 ttl=64 time=0.292 ms ^C --- 2001:470:XXXX:XXXX:21c:c0ff:fe2b:6478 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3000ms rtt min/avg/max/mdev = 0.269/1.107/3.559/1.415 ms standa@standa-laptop:~$ ping6 ipv6.google.com PING ipv6.google.com(2a00:1450:8007::69) 56 data bytes 64 bytes from 2a00:1450:8007::69: icmp_seq=1 ttl=57 time=20.7 ms 64 bytes from 2a00:1450:8007::69: icmp_seq=2 ttl=57 time=20.2 ms 64 bytes from 2a00:1450:8007::69: icmp_seq=3 ttl=57 time=23.4 ms ^C --- ipv6.google.com ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 2001ms rtt min/avg/max/mdev = 20.267/21.479/23.413/1.392 ms

Read the article

Windows RRAS multi-network routing

- by Brent Pabst

I am looking for advice, comments and suggestions from anyone who has used Windows RRAS (2008 R2 Pref.) as the primary routers for our multiple offices. We have multiple physical office locations and are looking into utilizing Windows Server 2008 R2 Core as redundant Active/Active routers/gateways for our network as opposed to a physical router from Cisco or Juniper, it costs a lot less! Any problems, issues or documentation anyone would recommend? We will still most likely have a firewall on the edge but the majority of our traffic will be inter-office with some external services. We will be using multiple Class B networks across our two offices.

Read the article

Routing public IPs (each a /32) through a VPN to another server

- by Lee S

Hopefully the title makes sense; I have a server currently in a colo facility, with many IP addresses routed to it. They are individual IPs and not in a contiguous block. Due to vastly improved connectivity (fibre) at home I am slowly bringing my infrastructure in-house for managability and eventually, cost savings. What I would like to do though is use the IP addresses allocated to my existing server, at home. I have an IP block allocated to me on my new ISP connection, but for a couple of reasons I'd like to make use of the colo ones for now: Ease of transition - lots of domains, dns, hard-coded IPs in programs, etc. Connectivity fallback. If my primary line goes down and switches to fallback 1 (dsl) or fallback 2 (4G), I lose access to the ISP-allocated IP block of IPs that are only presented on the primary WAN interface. What I'd like to achieve is my home virtualisation server (Proxmox/Debian-based) "dials in" to the colo server in the colo facility (also Proxmox/Debian) via VPN or similar, and gets to make use of the IP addresses that currently terminate on the colo box. If the primary connection to my ISP goes down and one of the fallback routes kicks in, the VPN tunnel will just time out and then be re-established on the backup connection instead. I'm sure this is doable, but I have no idea how. I'm not afraid to get my hands dirty, I just don't really know where to start?

Read the article

Routing between 2 different subnets on 2 different interfaces in SonicOS

- by Chris1499

I'm having a bit of a problem allowing traffic between two of my subnets. Here's the structure I've built. The X0 interface has our windows server on it and it handles DHCP/DNS, etc. X1 has the WAN connection. The Sonicwall is handling DHCP on X2. The X3 interface is connected to a different vlan on the 48 port switch. The Sonicwall is handling DHCP on this network as well. So here's what i want to do. The network on X2 is for our guest wireless; i don't want it to be able to access any of the other networks, just the internet, so i that all blocked in the firewall. No issues there. The X3 network is going to be for programmable controllers, and needs to be able to access the X0 network where our computers are. This is where my problem is. I'm not able to get between the 192.168.2.xxx and the 192.168.1.xxx on interfaces X0 and X3 respectively. I have these rules set up in the firewall. The Lan Primary Subnet is the 192.168.2.0 on X0. So if i'm not mistaken, this will allow traffic between the two through the firewall. Now this is where I'm a little confused. Do i need to use NAT to get the traffic from X0 to go to X3 (and vice versa), or a static route, or both? Currently i have both, though i doubt they're done correctly (also in screenshot). I've tried to ping between the two without luck. Any advice, or if you see what's wrong with my setup, is much appreciated. If you need some more information, let me know. Thanks all! EDIT: So i found that i don't neither either NAT or a static route, that the setting in the firewall is enough. I can now ping from the 192.168.1.xxx network, however i can't access the server on the 192.168.2.xxx network. When i try to access i get "An error occured while reconnecting to Z: to server Microsoft Windows Network: The local device name is already in use. This connection has not been restored. What am i missing?

Read the article

Load balancers, multiple data centers and url based routing

- by kunkunur

There is one data center - dc1. There is a business need to setup another data center - dc2 in another geography and there might be more in the future say dc3. Within the data center dc1: There are two web servers say WS1 and WS2. These two webservers do not share anything currently. There isnt any necessity foreseen to have more webservers within each dc. dc1 also has a local load balancer which has been setup with session stickiness. So if a user say u1 lands on dc1 and if the load balancer decides to route his first request to WS1 then from there on all u1's requests will get routed to WS1. Local load balancer and webservers are invisible to the user. Local load balancer listens to the traffic on a virtual ip which is assigned to the virtual cluster of webservers ws1 and ws2. Virtual ip is the ip to which the host name is resolved to in the DNS. There are no client specific subdomains as of now instead there is a client specific url(context). ex: www.example.com/client1 and www.example.com/client2. Given above when dc2 is onboarded I want to route the traffic between dc1 and dc2 based on the client. The options that I have found so far are. Have client specific subdomains e.g. client1.example.com and client2.example.com and assign each of them with the virtual ip of the data center to which I want to route them. or Assign www.example.com and www1.example.com to first dc i.e. dc1 and assign www2.example.com to dc2. All requests will first get routed to dc1 where WS1 and WS2 will redirect the user to www1.example.com or www2.example.com based on whether the url ends with /client1 or /client2. I need help in the following If I setup a global load balancer between dc1 and dc2 do I have any alternative solutions. That is, can a global load balancer route the traffic based on the url ? Are there drawbacks to subdomain based solutions compared to www1 solution? With www1 solution I am worried that it creates a dependency on dc1 atleast for the first request and the user will see that he is getting redirected to a different url.

Read the article

pfSense routing between two routers with shared network

- by JohnCC

I have a network set-up using two pfSense routers arranged like this:- DMZ1 WAN1 WAN2 DMZ2 | | | | | | | | \___ PF1 PF2___/ | | | | \___TRUSTED___/ Each pfSense router has its own separate WAN connection, and a separate DMZ network attached to it. They share a common TRUSTED LAN between them. The machines on the trusted network have PF1 as their default gateway. PF1 has a static route defined to DMZ2 via PF2, and PF2 has a static route to DMZ1 via PF1. There is NAT to the WAN but internal networks (DMZ1/2 and TRUSTED) use different RFC1918 subnets. I inherited this arrangement, and all used to work fine. I made a config change to PF1 (relating to multicast), and machines on DMZ2 suddenly could not talk to TRUSTED. I rolled the change back, but the problem persisted. What I guess you'd hope would happen is that TCP packets would go DMZ2 - PF2 - TRUSTED and on return TRUSTED - PF1 - PF2 - DMZ2. That's the only way I can see it would have worked. However, PF1 drops the returning packets. I've verified this using tcpdump. I've worked around this by adding static routes to DMZ2 via PF2 to the servers on TRUSTED, but some devices on there do not support static routes so this is not ideal. Is there way to make this arrangement work decently, or is the design inherently flawed? Thanks!

Read the article

Combat server downtime by duplicating server and re-routing when main server is down

- by Wasim

I have a CentOS server which at times either crashes or gets attacked with DDOS. At the moment I have an off site backup which is filled up with 1.7TB of data. I'm currently paying as much for the backup as I am for the server and I was looking for advice from experienced people as to what option is best to proceed from here. Would it be a viable solution to ditch the offsite backup, and instead purchase an additional server which is an exact duplication of the first server. So if the first server is down, users are re-routed to the second server without noticing the first server is even down. This would create an automatic backup of the first server (albeit not offsite) and relinquish the need for the expensive offsite backup. Is the above solution a true solution to pricey backup or is offsite backup absolutely necessary? How would I go about doing this (obviously it's pretty complex so just links to some reading material or the terminology of the procedure would be great)? Appreciate the help and advice.

Read the article

Routing between two networks on linux?

- by gGololicic

I got stuck with one problem I cant find solution. I have linux pc with two NIC. first nic (eth1) is connected to public ip (probably switch or whatever, doesnt really mater) so eth1 is connected to wan and another eth0 that I connected to switch and make it a lan nic. configuration: eth1 ip address 88.200.1xx.xxx //xxx's are cuz of security reasons eth0 ip address 192.168.1.1 wan ------ [eth1 (linux PC) eth0]<----[switch]<---- [eth1 (PC1)] Now I want to connect this two networks, so PC1 can access linux PC and wan. I think I know how to do it but I cant confiugre it right. This is what I tried: I turend on ip forwarding (for sure) I set eth1 default gw to the right ip on the wan I tried to set eth0 default gw to the same ip (but i couldnt) What or how can I do this, I was trying with linux route command, but I got stuck. Please help.

Read the article

Iptables: masquarading and routing

- by nixnotwin

I have a WAN router which is linked to isp over a /30 WAN subnet. But it also servers as a router to a /29 local public WAN subnet which is connected to few of my servers. The traffic from /29 gets routed to ISP via /30 subnet. For a wired reason I want to masqarade (NAT) the interface which has /30 ip. So the interface with /30 ip should appear as masquaraded for my 192.168.1.0/24 network and it also should act as a normal non-NAT router for my WAN public subnet /29. Can this be done with iptables on a Linux machine?

Read the article

PFSence VPN Routing

- by SvrGuy

We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

Read the article

Manual Http error response code in non-existent folder via routing

- by Slytherin

Apache server running on ubuntu-like linux I am getting unexpected behaviour when i try to manually send error response. If my .htaccess is responsible for the error response , then appropriate error document is loaded and displayed , with according response code in browser console. However , if my router is origin of the response code , then i get blank screen , but correct response code. .htaccess looks like this RewriteEngine On # RewriteBase / RewriteCond %{REQUEST_FILENAME} !-f RewriteCond %{REQUEST_FILENAME} !-d RewriteRule !\.(css|js|icon|zip|rar|png|jpg|gif|pdf)$ index.php [L] ErrorDocument 404 /err/404.html ErrorDocument 403 /err/403.html ErrorDocument 500 /err/500.html part of my router that sends the response is the following header("HTTP/1.1 403 Forbidden"); trying this format didnt help either header("HTTP/1.1 403 Forbidden", TRUE, 403); I also tried HTTP/1.0. Furthermore i was thinking that maybe relative path to error page might be an issue , but discarded this idea after attempting to access a document that is forbidden via .htaccess EDIT I should also point out , this scenario happens when URL for not-existing article is requested. Is it possible that Server is looking for a .htaccess file in a folder based on URL ? Eg: domain/blog/non-existent , is server looking for blog folder ? I am specifically asking this because there is no blog folder

Read the article

sporadic routing to another website when opening a common url

- by user226098

I have a strange problem in our office: Sometimes when opening a url from one of our projects random url in any browser not the right website shows up but some other website. In most of the cases it redirects to google.com with some parameters like https://www.google.de/?gfe_rd=cr&ei=krOOU8_kGcSKswadyYDQBw&gws_rd=ssl or just the ugly google 404 page). But today it remains on the origial url but shows up the the content of http://debug.netdna-cdn.com/. This happens about 1 time a week and for no apparent reason. Even stranger it only occurs on a single pc in the network. It now happens on two different computers in the network. Both use windows 8. The problem cannot be fixed by clearing the browser cache but by rebooting the pc or using ipconfig /flushdns. So I think it has something to do with the dns cache of the machine. But I have no idea what the reason is for this and how i can figure out how to solve it. Any ideas?

Read the article

Amazon EC2 + SSL Godaddy are not routing properly in HTTPS

- by azngunit81

I have an Amazon EC2 + SSL just installed on GoDaddy. I have successfully managed to install it and get the green https on the main domain https://www.example.com however it doesn't any https://www.example.com/something but the route works under http://www.example.com I am using an .htacess file for some rewrite. Options -MultiViews RewriteEngine On RewriteCond %{REQUEST_FILENAME} !-f RewriteRule ^ index.php [L] the Ec2 instance is ubuntu if that helps in anyway.

Read the article

Routing between same networks

- by osmandfj

I have two different sites: NetA has a subnet 192.168.2.0/24 NetB has 192.168.1.0/24. The two sites connect each other via IPsec VPN with fortigate devices. I need to move a server with IP address 192.168.2.240 from NetA to NetB and I cannot change its IP address due to some specific reasons. My question is; if I move that server from NetA to NetB, is it possible to reach that server from NetA?

Read the article

Http Modules are called on every request when using mvc/routing module

- by MartinF

I am developing a http module that hooks into the FormsAuthentication Module through the Authenticate event. While debugging i noticed that the module (and all other modules registered) gets hit every single time the client requests a resource (also when it requests images, stylesheets, javascript files (etc.)). This happens both when running on a IIS 7 server in integrated pipeline mode, and debugging through the webdev server (in non- integrated pipeline mode) As i am developing a website with a lot images which usually wont be cached by the client browser it will hit the modules a lot of unnessecary times. I am using MVC and its routing mechanishm (System.Web.Routing.UrlRoutingModule). When creating a new website the runAllManagedModulesForAllRequests attribute for the IIS 7 (system.webServer) section is per default set to true in the web.config, which as the name indicates make it call all modules for every single request. If i set the runAllManagedModulesForAllRequests attribute to false, no modules will get called. It seems that the reason for this is because of the routing module or mvc (dont know excactly why), which causes that the asp.net (aspx) handler never gets called and therefore the events and the modules never gets called (one time only like supposed). I tested this by trying to call "mydomain.com/Default.aspx" instead of just "mydomain.com/" and correctly it calls the modules only once like it is supposed. How do i fix this so it only calls the modules once when the page is requested and not also when all other resources are requested ? Is there some way i can register that all requests should fire the asp.net (aspx) handler, except requests for specific filetype extensions ? Of course that wont fix the problem if i choose to go with urls like /content/images/myimage123 for the images (without the extension). But i cant think of any other way to fix it. Is there a better way to solve this problem ? I have tried to set up an ignoreRoute like this routes.IgnoreRoute("content/{*pathInfo}"); where the content folder contains all the images, javascripts and stylesheets in seperat subfolders, but it doesnt seem to change anything. I can see there a many different possibilites when setting up a handler but I cant seem to figure out how it should be possible to setup one that will make it possible to use the routing module and have urls like /blog/post123 and not call the modules when requesting images, javascripts and stylesheets (etc.). Hope anyone out there can help me ? Martin

Read the article

ASP.NET MVC hosting problem, routing, handlers and modules

- by johnabs

Hi, This is one of them again, hosting with fasthosts. I recently purchased a windows developer package from them. When I tried to deploy my ASP.NET 3.5 MVC project, which was working fine with the same host on a reseller account, it is not working. The reason to move from reseller to a normal Windows Developer package is, the MS-SQL server database is too expensive in a reseller account, strange! I contact them, and they are saying they upgraded the control panel. The technical support said, I need to disable the Modules and Handlers from the web.config file. Also I need to deploy them as .dll files. I am not sure how to do that. The website is partially working now. I think the problem is now with the routing. I have not deployed any .dlls apart from the System.Web.Mvc.dll, System.Web.Routing.dll and System.Web.Abstractions.dll. I have not got a clue on how to deploy the Modules and Handlers. The code that I commented on the web.config file is as follows.  Anybody got any ideas please. Thank you for your time.

Read the article

asp.net mvc url routing

- by progtick

How do I map something like domain.com/username? The problem is I think that the MVC routing looks for the controller to determine how it should handle the mapping request. I am pretty new to ASP.NET MVC. However, based on the tutorials so far, the routing mechanism seems rather rigid.

Read the article

Routing and Membership

- by Curtis White

I have a page that uses routing and it works fine under Visual web developer. But when I deployed to IIS 7. The page that uses routing doesn't seem to recognize the user is logged in. I think I read about this but had not seen it until now. Hope there is a fix! Environment deployed too is ASP.NET 3.5 SP1, SQL SERVER 2008, and IIS 7 integrated. Thanks.

Read the article

Underscore as a segment_separators in routing.yml

- by Mickael

In symfony project, I would like to use an underscore as a separator for the parameter in routing.yml. Url example: /article/lorem-1111_45.html In routing.yml rule_sample: url: /article/:info-:datePublished_:id.html param: { module: cms, action: test } options: segment_separators: ['-', '/', '.', '_'] requirements: info: ^([A-Za-z0-9\-]+)$ datePublished: \d+ id: \d+ This code doesnt work. I have the following error: Unable to parse "/article/:info-:datePublished_:id.html" route near ":id.html". Anybody knows how to implement this rule ?

Read the article

setting up routing for the first time

- by user334017

I'm trying to set up url routing on my server for the first time. I'm fairly sure that mod_rewrite is enabled. Are there any other configurations I need to change or things to set up? Should the routing.yml file just automatically get read?

Read the article

Symfony: Special routing for mobile browsers

- by Migol

Is there any way that I can detect browser type on routing and use specific controller? I want to be able to do something like this in routing.yml: mobile: url: /* requirements: browser: mobile

Read the article

Routing algorithm

- by isaac

Hello, I'm giving a presentation about computer routing and I want to make a good analogy with a real-world situation. However, I could not find it. Do you have in mind any of the situations like the computer routing. If yes, could you please provide me with it

Read the article

How can I make Rails 3 router to localize url's using localization files?

- by edgerunner

What I'd like to be able to do is: in config/routes.rb resources :posts in config/locale/en.yml en: resources: posts: "posts" new: "new" edit: "edit" in config/locale/tr.yml tr: resources: posts: "yazilar" new: "yeni" edit: "duzenle" and get I18n.locale = :en edit_post_path(3) #=> /posts/3/edit I18n.locale = :tr edit_post_path(3) #=> /yazilar/3/duzenle I'd also like rails to match any of these routes anytime and pass the associated locale in the params hash such that when I navigate to /yazilar , the request should be routed to the posts#index action. Any simple way of doing that?

Read the article

How can I make the Rails 3 router localize URLs using localization files?

- by edgerunner

What I'd like to be able to do is: in config/routes.rb resources :posts in config/locale/en.yml en: resources: posts: "posts" new: "new" edit: "edit" in config/locale/tr.yml tr: resources: posts: "yazilar" new: "yeni" edit: "duzenle" and get I18n.locale = :en edit_post_path(3) #=> /posts/3/edit I18n.locale = :tr edit_post_path(3) #=> /yazilar/3/duzenle I'd also like Rails to match any of these routes anytime and pass the associated locale in the params hash such that when I navigate to /yazilar , the request should be routed to the posts#index action with the :tr locale in the params hash. Any simple or complex way of doing that?

Search Results

Search found 9478 results on 380 pages for 'rails routing'.

Page 25/380 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32 | Next Page >

- by Superman

- by Ficik

- by Brent Pabst

- by Lee S

- by Chris1499

- by kunkunur

- by JohnCC

- by Wasim

- by gGololicic

- by nixnotwin

- by SvrGuy

- by Slytherin

- by user226098

- by azngunit81

- by osmandfj

- by MartinF

- by johnabs

- by progtick

- by Curtis White

- by Mickael

- by user334017

- by Migol

- by isaac

- by edgerunner

- by edgerunner

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32 | Next Page >