Search Results

Search found 916 results on 37 pages for 'ws'.

Page 25/37 | < Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >

  • ADFS 2.0 Farm - How do I perform an immediate sync

    - by Matt
    Hi, We're using ADFS 2.0 on a windows 2008 server, it's in a farm and has the default polling interval of 5 minutes. We're making a change tonight and would rather sync immediately than wait for the other guy to update, especially as we might be making multiple changes. This Technet article mentions that I can change the polling interval or do an immediate sync between my servers: http://technet.microsoft.com/en-us/library/ee913581%28WS.10%29.aspx I checked the powershell commandlets for ADFS and I can only seem to find one that let's me set the polling interval, but not perform a 1 time immediate sync Searched the usual suspects, but just can't find a ADFS-SyncMyStuffNow command... Anyone?

    Read the article

  • Lot of Multicast traffic on LAN

    - by Nel
    Recently the whole network at work is being hit by multicast traffic originating on the LAN itself. I did some investigating and the service which seems to be responsible is ws-discovery. I have attached a screenshot of wireshark capturing the traffic. I have tried shutting down the source machine from which it was originating, but the multicast traffic still seems to be present in the network. My network topology 2 subnets - 10.10.10.0/24 and 10.20.10.0/24. Gateway is a debian system. We have 3 switches for 3 floors. They are all unmanaged Dlink 24-port switches. Multicast blocking at switch level is out of the question. Any solutions? :(

    Read the article

  • Replicating EFS encrypted files

    - by floyd
    Recently I attempted to configure Microsoft's DFSR on Windows 2008 R2 to replicate a folder which was encrypted with EFS. The setup gave no errors or warnings, but later I read that DFSR does not support EFS in any way. There were also event logs in the DFSR event log indicating an encrypted file was found and wont be replicated. http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_052 My question is, are there any tools that would allow this to occur? Software based preferably.This would be replicating over LAN to destination node for two servers on the same domain.

    Read the article

  • How to enable an active/active file server cluster in windows 2008 r2 Enterprise

    - by Phygg
    I've just created a cluster for my file servers in Windows 2008 R2 Ent SP1 environment. The goal - an Active/Active cluster for web server data How do I go about telling the cluster to be active for both nodes? Do I have to tell the cluster to be active/active? Here is a link to the instructions I followed when configuring the failover cluster. http://technet.microsoft.com/en-us/library/ff182326(WS.10).aspx So if anyone can help me to grasp the concept or maybe I'm way off and I need a node that is not active along with 2 active nodes to do this, I would appreciate it.

    Read the article

  • How to enable directory browsiing in IIS7?

    - by frankadelic
    How I enable directory browsing in IIS7? MS technet says this can be done in the IIS console: Open IIS Manager and navigate to the level you want to manage. In Features View, double-click Directory Browsing. In the Actions pane, click Enable if the Directory Browsing feature is disabled and you want to enable it. Or, click Disable if the Directory Browsing feature is enabled and you want to disable it. http://technet.microsoft.com/en-us/library/cc731109%28WS.10%29.aspx However, my IIS console doesn't have the Directory Browsing option mentioned in Step 2. How can this option be made available. Note, this is for a static HTML site, so I don't have any web.config or ASPX files.

    Read the article

  • Git and Amazon EC2 public key denied

    - by MrNart
    I had git working before on /var/html/projectfolder and realized it was a security risk so I made a new folder /projects from the root folder and tried to replicate what I did and now it doesnt work. Here is the backlog of what I did for my local machine and EC2 - server Server-EC2 1.I added my public key to the authorized_user file in ~/.ssh folder 2.Create a bare repository git init --bare 3.Change folder permissions to sudo chgrp -R ec2-user * sudo chmod -R g+ws * Local Machine create a local repository with git init touch, add, commit readme file pointed origin master to ec2 via git remote add origin ssh://ec2-user@remote-ip/path/to/folder This is my output: Permission Denied (publickey) fatal: The remote end hung up unexpectedly

    Read the article

  • All Tasks..Advanced Operations option missing from Certificaces MMC Snap-In

    - by JohnFx
    I am trying to follow the instructions in this article to create a custom certificate to support SSL on a web server. I'm stick on the following step: Click on Personal – All Tasks – Advanced Operations – Create Custom request The problem is that on the web server (Windows Server 2003 R2) I don't have an "Advanced Operations" option under "All Tasks". I do on my desktop machine (Windows 7), but not on the server. All the documentation I can find indicates that it should be available on WS-2003-R2, but it just isn't. Note: I'm going through this manual process because I need to specify a alternate host names in the CSR, which you can't do through the IIS 6.0 console certificate managment functionality. Any suggestions for how to make this option show up?

    Read the article

  • Why has ESXi 5.0 not used the software RAID configuration on my test server?

    - by kafka
    I've got a test server which was running WS 2008 Enterprise on the bare metal. It was correctly using the software RAID 1 configuration (2x250 GB disks which appeared as one disk), setup on the Dell Poweredge T110 (which meets compatibility requirements) without requiring any extra setup from me. (As an aside I'm fairly sure it's software RAID, as we didn't spec a hardware RAID controller, if that's of any importance in this situation). I am now testing installing ESXi 5.0 on this server to run some VMs. I've successfully installed ESXi, and imported a VM fine, but it's showing 2 x 250 GB disks available as datastores. However they should be appearing as one volume. When I boot the server, there is a RAID configuration screen you can enter, and I'm guessing this is what I'll have to do at some stage, but now need to be very careful because there is one disk which contains data that I want to be mirrored on the other disk. What is the best thing to do in this situation?

    Read the article

  • icacls, Network Service, and setting ACLs on Windows Server 2008

    - by Ted
    Setting ACLs on Windows Server 2008 via the command line is giving me some problems. As per http://web2.minasi.com/forum/topic.asp?TOPIC%5FID=26907 I've tried all sorts of variations: C:\Windows\system32icacls "D:\Websites\site.com\Web\bin*" /grant 'NT A uthority\NETWORK SERVICE: (OI) (CI)M' C:\Windows\system32icacls "D:\Websites\site.com\Web\bin*" /grant "NETWORK SERVICE": (OI) (CI)M And all variations in between. However, each try leads to i.e. "Invalid parameter "'NETWORK'"" depending on the variation above. As per http://technet.microsoft.com/en-us/library/cc753525%28WS.10%29.aspx (see in comments), it appears that others have experienced the same issue where the same command works on Windows 7/Vista/etc., but not on Windows Server 2008. What's the best way to apply permissions to Network Service account on a directory and/or files via the command line in Windows Server 2008? Especially as there's no way to do multiple file permissions at once via the GUI (see http://serverfault.com/questions/30991/windows-server-2008-change-security-settings-for-multiple-files-at-once).

    Read the article

  • difference between server and desktop

    - by user1241438
    I want to set up a webserver. I would like to buy a hardware for that and i am trying to understand if i should buy a desktop and host the webserver on that or do i have to buy some used server from ebay and host on it. Example is http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180986172861&ssPageName=ADME:X:RTQ:US:1123 But what is the difference in desktop and server? These days even desktops are coming with high RAM. Only other difference i see is servers have RAID HARD disk. Is there any other difference?

    Read the article

  • Websphere 7: Getting 'Internal Server Error' when accessing JSPs. Servlets ok

    - by paul
    I have just installed WS 7 on our stage server. The test server was done some months ago. I have deployed the same applications to stage as on test. One application is causing me problems. I call the login servlet but the result is an 'Internal Server Error' message. From my logs I can see that the servlet processed the log in successfully and redirects to a JSP. That is the last message. I can find no further info in any of the other standard out/err logs. I have tried creating a simple JSP containing only HTML - same error. If I rename the file to test.html, it displays correctly. The plugin configuration appears to be identical with the one on the test server (where everything works) Ideas anyone?

    Read the article

  • Creating disk snapshots in Windows 7

    - by Puneet Arora
    Does anyone know of a command or tool to create disk snapshots on Windows 7 (client SKU)? I see vssadmin.exe has a "create shadow" option, but that's available only on server SKUs: http://technet.microsoft.com/en-us/library/cc788055(v=ws.10).aspx I've a backup tool that replicates changes (creations, modifications and deletions to files and directories) since last backup, to my backup volume. Before each time this happens I want to create a persistent snapshot on my backup volume. I could then mount previous snapshots to view previous backups achieving a behavior similar to that of TimeMachine in OS X. This question has been asked before but unfortunately there weren't any good answers: Taking snapshots of filesystem/volume in Windows 7?

    Read the article

  • How do I setup a syslog server for my network?

    - by Solignis
    I would like to setup a syslog server to forward all log file from all of my VMs and servers. I really don't much about what is out there. So I turn to the community, Something on Linux is fine, what I want more is alert ability like emails telling me something is not right. If there was something to sort the logs by source that would be cool. Where would I want run the syslog server from? My admin WS or a server/VM? Any input would be wonderful. Thanks in advance.

    Read the article

  • Spotify stopped scrobbling to libre.fm - unable to login

    - by dsolimano
    I've set Spotify up to scrobble to libre.fm using the hosts file hack, as specified on the wiki, adding these two entries to my hosts file. 149.20.54.250 post.audioscrobbler.com 149.20.54.250 ws.audioscrobbler.com This worked for a while. However, Spotify now tells me that it can't log in to libre.fm. I've double checked my username and password. I haven't changed anything else. Using nslookup confirms that the above names resolve to the correct IPs. So, how do I fix this?

    Read the article

  • Time Synch Architecture in Windows Domain Environment

    - by Param
    I just read the following article -- "In a domain, time synchronization takes place when Windows Time Service turns on during system startup and periodically while the system is running." ( http://technet.microsoft.com/en-us/library/cc779145%28v=ws.10%29.aspx ) From the above article i get to know that the first sync it take as soon as i start my system, but after that in how many minutes or second or in how many periodic interval my windows client ( Window XP, window7 or window server 2008 member ) synch with my Domain controller (PDC emulator )??? Do you have any idea, and how should i verify my synch time interval? My Domain Controller is Window server 2008 R2 Standard

    Read the article

  • Apache log lines contain "..."

    - by mtah
    We have a custom log line format for Apache logs which are analyzed. CustomLog "|/usr/sbin/rotatelogs -l /mnt/var/log/apache2/access-%Y%m%d%H%M%S.log 900" "%a %{%s}t \"%r\"" However, some log lines are mysteriously shortened with "..." for some reason, but how can this be? The shortest length line discovered where this occurs is 317 chars while the longest line is way over 2000 chars. "GET /exposure?sg=&ap=0x0&fv=WIN%2010,0,22,87&si=IH95VDUAVLJ0&pt=Lage%20hjemmelaget%20sengegavl%20-%20Forum%20-%20Diskusjon.no&iv=0&sd=1024x600&ct=680&tz=-120&eu=http%3A//www.diskusjon.no/index.php%3Fshowtopic%3D1011139&l...AS3&an=NO%20-%20180x500%20Pretail%20CPC&wd=1024x483&rf=http%3A//www.google.no/search%3Fhl%3Dno%26source%3Dhp%26q%3Dsengegavl+lage%26meta%3D%26aq%3D2%26aqi%3Dg10%26aql%3D%26oq%3Dsengega%26gs_rfai%3D&ui=3INYF5QAZL10&ws=0x417&ad=180x500&sa= HTTP/1.1"

    Read the article

  • Web map services displaying poorly

    - by user29261
    Web map services no longer display correctly in ArcGIS and Google Earth - no one else on network is experiencing these. Using windows 7 OS. These problem began abruptly (1 day they were working, the next they were not). Specific problems include not displaying at all; correct display on 10% of the monitor and repeating lines of coloured squiggles and text on the remaining 90%; and small, widely spaced, pixels in place of colour fill. Links where this occurs: arcgis http://wms.ess-ws.nrcan.gc.ca/wms/toporama_en Google earth http://openmaps.gov.bc.ca/kml/BCGov_Web_Map_Library.kml I can't pinpoint any changes to the computer setup which may have prompted this, however, adding arcgis 10.1 SP 1 occured around the same time. Probably just a coincidence. Anyone had similar problems? or solutions to these? Thanks for any thoughts. Jim

    Read the article

  • HyperV management through Windows 8

    - by Snake
    Consider the following setup: 1 Hypervisor 3 Clients (Server 2012 with AD, Server 2012, Windows 8). Now we can remote desktop into the Hypervisor and manage the VMs with the manager. This also works from the Server 2012 (I installed the manager there). But it doesn't work from the Windows 8 machine. All machines are in the same domain. Am I forgetting something? I followed this long page http://technet.microsoft.com/en-us/library/cc794756(v=ws.10).aspx But I find it so weird that it works for the same user on Windows Server 2012, but not on Windows 8.

    Read the article

  • System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse request failed with HTTP status 40

    - by John Galt
    I am trying to make some enhancements to a production web app. After quite a bit of unit testing on my WinXP IIS 5.1 development machine, everything works on my localhost so I used the Visual Studio 2008 PUBLISH dialog on my Dev PC to push the following projects to a staging server: the primary web app the "primary" webservice (the home page tries to invoke this WS) a "secondary" webservice (not yet a problem because home page does not invoke this WS) I get the following when I try to browse to the home page of the web app typing this into my browser: link text Server Error in '/zVersion2' Application. The request failed with HTTP status 404: Not Found. Description: An unhandled exception occurred during the execution of the current web request.Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Net.WebException: The request failed with HTTP status 404: Not Found. Source Error: An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace: [WebException: The request failed with HTTP status 404: Not Found.] System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall) +431289 System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters) +204 ProxyZipeeeService.WSZipeee.Zipeee.GetMessageByType(Int32 iMsgType) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\ProxyZipeeeService\ProxyZipeeeService\Web References\WSZipeee\Reference.vb:2168 Zipeee.frmZipeee.LoadMessage() in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:43 Zipeee.frmZipeee.Page_Load(Object sender, EventArgs e) in C:\Documents and Settings\johna\My Documents\Visual Studio 2008\Projects\Zipeee\frmZipeee.aspx.vb:33 System.Web.UI.Control.OnLoad(EventArgs e) +99 System.Web.UI.Control.LoadRecursive() +50 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +627 Version Information: Microsoft .NET Framework Version:2.0.50727.3607; ASP.NET Version:2.0.50727.3082 Here is a bit of the corresponding source code: Public wsZipeee As New ProxyZipeeeService.WSZipeee.Zipeee Dim dsStandardMsg As DataSet Private Sub Page_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load If Not Page.IsPostBack Then LoadMessage() End If End Sub Private Sub LoadMessage() Dim iCnt As Integer Dim iValue As Integer dsStandardMsg = wsZipeee.GetMessageByType(BizConstants.MsgType.Standard) End Sub I suspect I may have configured things incorrectly on the staging server. The staging server is Win Server 2003 ServicePack 2 running IIS 6.0. When I published the primary site and the 2 webservices on the staging server called MOJITO I created the physical directories for each on the D drive. Then using INETMGR, I configured the following virtual directories: zVersion2 zVersion2wsSQL zVersion2wsEmergency All of the above are configured to use a new application pool I setup and named zVersion2aspNet20. The default web site for this machine MOJITO is configured to use ASP.NET 1.1 and the IP address is set to (All Unassigned). The production versions of the latter 2 webservices run on the MOJITO machine (named ZipeeeService and EmergencyService respectively). Can my staging versions of the above webservices (named zVersion2wsSQL and zVersion2wsEmergency respectively) co-exist on the same web server with the same IP address? Please note that when I test the zVersion2wsSQL webservice independently (from INETMGR right-mouse and click Browse) it works as expected (i.e. presenting all the methods of the webservice) like this snippet: GetMessageByType MessageName="Get_x0020_Message_x0020_By_x0020_Type" I can test this webmethod by clicking on it and it presents the Test dialog (because it takes a simple datatype and I am invoking it on localhost (i.e. MOJITO): **Get Message By Type** **Test** To test the operation using the HTTP POST protocol, click the 'Invoke' button. Parameter Value iMsgType: _______ [INVOKE button] SOAP 1.1 ....etc. I fear I may have rambled with too much information so I will stop but I hope someone can help me as I cannot understand why this request results in a "not found". Thanks.

    Read the article

  • Problems occurred when invoking code from plug-in: "org.eclipse.jface"

    - by user1775376
    I've got a new java project at Eclipse from SVN and just tried to open the project in the Eclipce's Project Explorer window and received this error: Problems occurred when invoking code from plug-in: "org.eclipse.jface". I've no idea what's this, can you guys help me? Exception Stack Trace: java.lang.NullPointerException at org.jboss.ide.eclipse.as.classpath.core.ejb3.EJB3ClasspathContainer.getClasspathEntries(EJB3ClasspathContainer.java:115) at org.eclipse.jdt.internal.core.JavaProject.resolveClasspath(JavaProject.java:2695) at org.eclipse.jdt.internal.core.JavaProject.resolveClasspath(JavaProject.java:2853) at org.eclipse.jdt.internal.core.JavaProject.getResolvedClasspath(JavaProject.java:1958) at org.eclipse.jdt.internal.core.PackageFragmentRoot.getRawClasspathEntry(PackageFragmentRoot.java:547) at org.eclipse.jdt.internal.corext.buildpath.ClasspathModifier.isExcluded(ClasspathModifier.java:485) at org.eclipse.jdt.internal.ui.wizards.buildpaths.newsourcepage.IncludeToBuildpathAction.canHandle(IncludeToBuildpathAction.java:170) at org.eclipse.jdt.internal.ui.wizards.buildpaths.newsourcepage.BuildpathModifierAction.selectionChanged(BuildpathModifierAction.java:101) at org.eclipse.jface.viewers.Viewer$2.run(Viewer.java:164) at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42) at org.eclipse.ui.internal.JFaceUtil$1.run(JFaceUtil.java:49) at org.eclipse.jface.util.SafeRunnable.run(SafeRunnable.java:175) at org.eclipse.jface.viewers.Viewer.fireSelectionChanged(Viewer.java:162) at org.eclipse.jface.viewers.StructuredViewer.updateSelection(StructuredViewer.java:2188) at org.eclipse.jface.viewers.StructuredViewer.handleSelect(StructuredViewer.java:1211) at org.eclipse.ui.navigator.CommonViewer.handleSelect(CommonViewer.java:478) at org.eclipse.jface.viewers.StructuredViewer$4.widgetSelected(StructuredViewer.java:1241) at org.eclipse.jface.util.OpenStrategy.fireSelectionEvent(OpenStrategy.java:239) at org.eclipse.jface.util.OpenStrategy.access$4(OpenStrategy.java:233) at org.eclipse.jface.util.OpenStrategy$1.handleEvent(OpenStrategy.java:403) at org.eclipse.swt.widgets.EventTable.sendEvent(EventTable.java:84) at org.eclipse.swt.widgets.Display.sendEvent(Display.java:4128) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1457) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1480) at org.eclipse.swt.widgets.Widget.sendEvent(Widget.java:1465) at org.eclipse.swt.widgets.Widget.notifyListeners(Widget.java:1270) at org.eclipse.swt.widgets.Display.runDeferredEvents(Display.java:3974) at org.eclipse.swt.widgets.Display.applicationNextEventMatchingMask(Display.java:4875) at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5226) at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method) at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220) at org.eclipse.swt.widgets.Widget.mouseDownSuper(Widget.java:1092) at org.eclipse.swt.widgets.Tree.mouseDownSuper(Tree.java:2052) at org.eclipse.swt.widgets.Widget.mouseDown(Widget.java:1084) at org.eclipse.swt.widgets.Control.mouseDown(Control.java:2528) at org.eclipse.swt.widgets.Tree.mouseDown(Tree.java:2007) at org.eclipse.swt.widgets.Display.windowProc(Display.java:5471) at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method) at org.eclipse.swt.widgets.Widget.callSuper(Widget.java:220) at org.eclipse.swt.widgets.Widget.windowSendEvent(Widget.java:2095) at org.eclipse.swt.widgets.Shell.windowSendEvent(Shell.java:2253) at org.eclipse.swt.widgets.Display.windowProc(Display.java:5535) at org.eclipse.swt.internal.cocoa.OS.objc_msgSendSuper(Native Method) at org.eclipse.swt.widgets.Display.applicationSendEvent(Display.java:4989) at org.eclipse.swt.widgets.Display.applicationProc(Display.java:5138) at org.eclipse.swt.internal.cocoa.OS.objc_msgSend(Native Method) at org.eclipse.swt.internal.cocoa.NSApplication.sendEvent(NSApplication.java:128) at org.eclipse.swt.widgets.Display.readAndDispatch(Display.java:3610) at org.eclipse.ui.internal.Workbench.runEventLoop(Workbench.java:2701) at org.eclipse.ui.internal.Workbench.runUI(Workbench.java:2665) at org.eclipse.ui.internal.Workbench.access$4(Workbench.java:2499) at org.eclipse.ui.internal.Workbench$7.run(Workbench.java:679) at org.eclipse.core.databinding.observable.Realm.runWithDefault(Realm.java:332) at org.eclipse.ui.internal.Workbench.createAndRunWorkbench(Workbench.java:668) at org.eclipse.ui.PlatformUI.createAndRunWorkbench(PlatformUI.java:149) at org.eclipse.ui.internal.ide.application.IDEApplication.start(IDEApplication.java:123) at org.eclipse.equinox.internal.app.EclipseAppHandle.run(EclipseAppHandle.java:196) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.runApplication(EclipseAppLauncher.java:110) at org.eclipse.core.runtime.internal.adaptor.EclipseAppLauncher.start(EclipseAppLauncher.java:79) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:344) at org.eclipse.core.runtime.adaptor.EclipseStarter.run(EclipseStarter.java:179) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:597) at org.eclipse.equinox.launcher.Main.invokeFramework(Main.java:622) at org.eclipse.equinox.launcher.Main.basicRun(Main.java:577) at org.eclipse.equinox.launcher.Main.run(Main.java:1410) Session Data: eclipse.buildId=M20120208-0800 java.version=1.6.0_37 java.vendor=Apple Inc. BootLoader constants: OS=macosx, ARCH=x86_64, WS=cocoa, NL=en_US Framework arguments: -product org.eclipse.epp.package.jee.product -keyring /Users/saraiva/.eclipse_keyring -showlocation Command-line arguments: -os macosx -ws cocoa -arch x86_64 -product org.eclipse.epp.package.jee.product -keyring /Users/saraiva/.eclipse_keyring -showlocation

    Read the article

  • overloaded stream insertion operator with a vector

    - by Julz
    hi, i'm trying to write an overloaded stream insertion operator for a class who's only member is a vector. i dont really know what i'm doing. (lets make that clear) it's a vector of "Points" which is a struct containing two doubles. i figure what i want is to insert user input (a bunch of doubles) into a stream that i then send to a modifier method? i keep working off other stream insertion examples such as... std::ostream& operator<< (std::ostream& o, Fred const& fred) { return o << fred.i_; } but when i try a similar..... istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr.vertices; return inStream; } i get an error "no match for operator etc etc. if i leave off the .vertices it compiles but i figure it's not right? (vertices is the name of my vector ) and even if it is right, i dont actually know what syntax to use in my driver to use it? also not %100 on what my modifier method needs to look like. here's my Polygon class //header #ifndef POLYGON_H #define POLYGON_H #include "Segment.h" #include <vector> class Polygon { friend std::istream & operator >> (std::istream &inStream, Polygon &vertStr); public: //Constructor Polygon(const Point &theVerts); //Default Constructor Polygon(); //Copy Constructor Polygon(const Polygon &polyCopy); //Accessor/Modifier methods inline std::vector<Point> getVector() const {return vertices;} //Return number of Vector elements inline int sizeOfVect() const {return (int) vertices.capacity();} //add Point elements to vector inline void setVertices(const Point &theVerts){vertices.push_back (theVerts);} private: std::vector<Point> vertices; }; #endif //Body using namespace std; #include "Polygon.h" // Constructor Polygon::Polygon(const Point &theVerts) { vertices.push_back (theVerts); } //Copy Constructor Polygon::Polygon(const Polygon &polyCopy) { vertices = polyCopy.vertices; } //Default Constructor Polygon::Polygon(){} istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr; return inStream; } any help greatly appreciated, sorry to be so vague, a lecturer has just kind of given us a brief example of stream insertion then left us on our own thanks. oh i realise there are probably many other problems that need fixing

    Read the article

  • unrecognized rule in lex

    - by Max
    I'm writing a program in lex, and it gives me the following error: scanner.l:49: unrecognized rule Line 49 is: {number} {return(NUM);} Here's my code: #include <stdio.h> %token BOOL, ELSE, IF, TRUE, WHILE, DO, FALSE, INT, VOID %token LPAREN, RPAREN, LBRACK, RBRACK, LBRACE, RBRACE, SEMI, COMMA, PLUS, MINUS, TIMES %token DIV, MOD, AND, OR, NOT, IS, ADDR, EQ, NE, LT, GT, LE, GE %token NUM, ID, PUNCT, OP int line = 1, numAttr; char *strAttr; %} /* regular definitions */ delim [ \t] ws {delim}+ letter [A-Za-z] digit [0-9] id ({letter} | _)({letter} | {digit} | _)* number {digit}+ %% {ws} {/* no action and no return */} [\n] {line++;} bool {return(BOOL);} else {return(ELSE);} if {return(IF);} true {return(TRUE);} while {return(WHILE);} do {return(DO);} false {return(FALSE);} int {return(INT);} void {return(VOID);} {id} {return(ID);} {number} {return(NUM);} // error is here "(" {yylval = LPAREN; return(PUNCT);} ")" {yylval = RPAREN; return(PUNCT);} "[" {yylval = LBRACK; return(PUNCT);} "]" {yylval = RBRACK; return(PUNCT);} "{" {yylval = LBRACE; return(PUNCT);} "}" {yylval = RBRACE; return(PUNCT);} ";" {yylval = SEMI; return(PUNCT);} "," {yylval = COMMA; return(PUNCT);} "+" {yylval = PLUS; return(OP);} "-" {yylval = MINUS; return(OP);} "*" {yylval = TIMES; return(OP);} "/" {yylval = DIV; return(OP);} "%" {yylval = MOD; return(OP);} "&" {yylval = ADDR; return(OP);} "&&" {yylval = AND; return(OP);} "||" {yylval = OR; return(OP);} "!" {yylval = NOT; return(OP);} "!=" {yylval = NE; return(OP);} "=" {yylval = IS; return(OP);} "==" {yylval = EQ; return(OP);} "<" {yylval = LT; return(OP);} "<=" {yylval = LE; return(OP);} ">" {yylval = GT; return(OP);} ">=" {yylval = GE; return(OP);} %% What is wrong with that rule? Thanks.

    Read the article

  • overloaded stream insetion operator with a vector

    - by julz666
    hi, i'm trying to write an overloaded stream insertion operator for a class who's only member is a vector. i dont really know what i'm doing. (lets make that clear) it's a vector of "Points" which is a struct containing two doubles. i figure what i want is to insert user input (a bunch of doubles) into a stream that i then send to a modifier method? i keep working off other stream insertion examples such as... std::ostream& operator<< (std::ostream& o, Fred const& fred) { return o << fred.i_; } but when i try a similar..... istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr.vertices; return inStream; } i get an error "no match for operator etc etc. if i leave off the .vertices it compiles but i figure it's not right? (vertices is the name of my vector ) and even if it is right, i dont actually know what syntax to use in my driver to use it? also not %100 on what my modifier method needs to look like. here's my Polygon class //header #ifndef POLYGON_H #define POLYGON_H #include "Segment.h" #include <vector> class Polygon { friend std::istream & operator >> (std::istream &inStream, Polygon &vertStr); public: //Constructor Polygon(const Point &theVerts); //Default Constructor Polygon(); //Copy Constructor Polygon(const Polygon &polyCopy); //Accessor/Modifier methods inline std::vector<Point> getVector() const {return vertices;} //Return number of Vector elements inline int sizeOfVect() const {return (int) vertices.capacity();} //add Point elements to vector inline void setVertices(const Point &theVerts){vertices.push_back (theVerts);} private: std::vector<Point> vertices; }; #endif //Body using namespace std; #include "Polygon.h" // Constructor Polygon::Polygon(const Point &theVerts) { vertices.push_back (theVerts); } //Copy Constructor Polygon::Polygon(const Polygon &polyCopy) { vertices = polyCopy.vertices; } //Default Constructor Polygon::Polygon(){} istream & operator >> (istream &inStream, Polygon &vertStr) { inStream >> ws; inStream >> vertStr; return inStream; } any help greatly appreciated, sorry to be so vague, a lecturer has just kind of given us a brief example of stream insertion then left us on our own thanks. oh i realise there are probably many other problems that need fixing

    Read the article

  • Question about API and Web application code sharing

    - by opendd
    This is a design question. I have a multi part application with several user types. There is a user client for the patient that interacts with a web service. There is an API evolving behind the web service that will be exposed to institutional "users" and an interface for clinicians, researchers and admin types. The patient UI is Flex. The clinician/admin portion of the application is RoR. The API is RoR/rack based. The web service component is Java WS. All components access the same data source. These components are deployed as separate components to their own subdomains. This decision was made to allow for scaling the components individually as needed. Initially, the decision was made to split the code for the RoR Web application from the RoR API. This decision was made in the interests of security and keeping the components focused on specific tasks. Over the course of time, there is necessarily going to be overlap and I am second guessing my decision to keep the code totally separate. I am noticing code being lifted from the admin side being lifted, modified and used in the API. This being the case, I have been considering merging the Ruby based repositories. I am interested in ideas and insight on this situation along with the reasoning behind your thoughts. Thanks.

    Read the article

  • Service-Oriented Architecture and Web Services

    Service oriented architecture is an architectural model for developing distributed systems across a network or the Internet. The main goal of this model is to create a collection of sub-systems to function as one unified system. This approach allows applications to work within the context of a client server relationship much like a web browser would interact with a web server. In this relationship a client application can request an action to be performed on a server application and are returned to the requesting client. It is important to note that primary implementation of service oriented architecture is through the use of web services. Web services are exposed components of a remote application over a network. Typically web services communicate over the HTTP and HTTPS protocols which are also the standard protocol for accessing web pages on the Internet.  These exposed components are self-contained and are self-describing.  Due to web services independence, they can be called by any application as long as it can be accessed via the network.  Web services allow for a lot of flexibility when connecting two distinct systems because the service works independently from the client. In this case a web services built with Java in a UNIX environment not will have problems handling request from a C# application in a windows environment. This is because these systems are communicating over an open protocol allowed by both environments. Additionally web services can be found by using UDDI. References: Colan, M. (2004). Service-Oriented Architecture expands the vision of web services, Part 1. Retrieved on August 21, 2011 from http://www.ibm.com/developerworks/library/ws-soaintro/index.html W3Schools.com. (2011). Web Services Introduction - What is Web Services. Retrieved on August 21, 2011 from http://www.w3schools.com/webservices/ws_intro.asp

    Read the article

< Previous Page | 21 22 23 24 25 26 27 28 29 30 31 32  | Next Page >