Search Results

Search found 8408 results on 337 pages for 'cgi bin'.

Page 250/337 | < Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >

• How to force Weblogic to start deployments in active state (i.e. not just prepared)

  - by doublep

  When I start a Weblogic instance with a deployed application, the deployment is sometimes left in prepared state, not in active state. I have to go to Weblogic Console and start the deployment manually, which is quite slow and annoying repetetive work. Since this is done on a development machine — sometimes 50 times a day, — there are no security implication as the server is only visible on the local network. Is there some way to have it always start the deployment active? Note that I'm not redeploying the application, I instead have it "constantly deployed" and stop/start the Weblogic instance using the scripts in bin directory.

  Read the article

• Loop over a file and write the next line if a condition is met

  - by 111078384259264152964

  Having a hard time fixing this or finding any good hints about it. I'm trying to loop over one file, modify each line slightly, and then loop over a different file. If the line in the second file starts with the line from the first then the following line in the second file should be written to a third file. !/usr/bin/env python with open('ids.txt', 'rU') as f: with open('seqres.txt', 'rU') as g: for id in f: id=id.lower()[0:4]+'_'+id[4] with open(id + '.fasta', 'w') as h: for line in g: if line.startswith(''+ id): h.write(g.next()) All the correct files appear, but they are empty. Yes, I am sure the if has true cases. :-) "seqres.txt" has lines with an ID number in a certain format, each followed by a line with data. The "ids.txt" has lines with the ID numbers of interest in a different format. I want each line of data with an interesting ID number in its own file. Thanks a million to anyone with a little advice!

  Read the article

• How to check file exists and rename in perl

  - by Disco

  I'm kinda newbie to perl and looking for a script that will handle file moving. #!/usr/bin/perl -w $filename = 'DUMBFILE'; $destination = '/some/location/'; if (-e $destination + $filename) { print "File Exists ! Renaming .."; move ('/tmp/' + $filename, $destination + $filename + '.1'); } else { move ('/tmp/' + $filename, $destination + $filename); } I'm able to rename it to 1, but i want to be renamed incrementally, like if file.1 exists, rename to .2, and .3 if .2 exists. That should be easy to do, but i'm kinda lost ..

  Read the article

• Listing time every second as a Bash script

  - by Caleb

  Hello all, first time here as I've finally started to learn programming. Anyway, I'm just trying to print the time in nanoseconds every second here, and I have this: #!/usr/bin/env bash while true; do date=(date +%N) ; echo $date ; sleep 1 ; done Now, that simply yields a string of date's, which isn't what I want. My learning has been rather messy, so I hope you'll excuse me for this if it's really simple. Also, I did manage to fine this, that worked on the prompt: while true ; do date +%N ; sleep 1 ; done But that obviously doesn't work as a script.

  Read the article

• ASP.NET plug-in architecture, settings problem

  - by Xaqron

  I want to divide business layer (BLL) of an asp.net application into multiple components. Each component is a .NET class library which is compiled as a standalone DLL. These components should have their own configuration files. For example "MyNameSpace.Users.dll" contains classes about users of the website and there's a password policy to check if password length is at least x characters. When webmaster edits the config file of this DLL and set x to y then component (DLL) should use new value (y) in the future and enforce passwords to be at least y characters. I want each component as a single project and compile them separaely (and not to put all projects in a solution in Visual Studio), and put the DLLs of these libraries into the "Bin" folder of my ASP.NET application. Is it possible ? Where should I put these config files ?

  Read the article

• yiic shell: failed to perform 'crud'

  - by ufw

  Debian Squeeze, PHP 5.3.2-1, Yii 1.1.2, PHP $path to php is /usr/bin/php, permissions are '777'. When I try to run 'crud Test' in yii shell, I get the following error message: PHP Warning: include(/var/www/test/protected/models/Test.php): failed to open stream: No such file or directory in /var/www/yii/framework/YiiBase.php on line 335 PHP Warning: include(): Failed opening '/var/www/test/protected/models/Test.php' for inclusion (include_path='.:/var/www/test/protected/components:/var/www/test/protected/models:/usr/share/php:/usr/share/pear') in /var/www/yii/framework/YiiBase.php on line 335 PHP Fatal error: Class 'Test' not found in /var/www/yii/framework/db/ar/CActiveRecord.php on line 341

  Read the article

• BASH Install Of Wordpress, Without Visiting wp-admin/install.php

  - by user916825

  I wrote this little BASH script that creates a folder,unzips Wordpress and creates a database for a site. The final step is actually installing Wordpress, which usually involves pointing your browser to install.php and filling out a form in the GUI. I want to do this from the BASH shell, but can't figure out how to invoke wp_install() and pass it the parameters it needs: -admin_email -admin_password -weblog_title -user_name (line 85 in install.php) Here's a similar question, but in python #!/bin/bash #ask for the site name echo "Site Name:" read name # make site directory under splogs mkdir /var/www/splogs/$name dirname="/var/www/splogs/$name" #import wordpress from dropbox cp -r ~/Dropbox/Web/Resources/Wordpress/Core $dirname cd $dirname #unwrap the double wrap mv Core/* ./ rm -r Core mv wp-config-sample.php wp-config.php sed -i 's/database_name_here/'$name'/g' ./wp-config.php sed -i 's/username_here/root/g' ./wp-config.php sed -i 's/password_here/mypassword/g' ./wp-config.php cp -r ~/Dropbox/Web/Resources/Wordpress/Themes/responsive $dirname/wp-content/t$ cd $dirname CMD="create database $name" mysql -uroot -pmypass -e "$CMD" How do I alter the script to automatically run the installer without the need to open a browser?

  Read the article

• Passing multiple arguments to a UNIX shell script

  - by Waffles

  I have the following (bash) shell script, that I would ideally use to kill multiple processes by name. #!/bin/bash kill `ps -A | grep $* | awk '{ print $1 }'` However, while this script works is one argument is passed: end chrome (the name of the script is end) it does not work if more than one argument is passed: $end chrome firefox grep: firefox: No such file or directory What is going on here? I thought the $* passes multiple arguments to the shell script in sequence. I'm not mistyping anything in my input - and I the programs I want to kill (chrome and firefox) are open. Any help is appreciated.

  Read the article

• Call Babel .Net Obfuscator from C# Code

  - by aron

  Hello, I have a C# WinForms app that I use to create software patches for my app. In noticed that Babel .Net includes Babel.Build.dll and Babel.Code.dll Is there a way, in my C# code, I can call Babel .Net something like: ExecuteCommand(C:\Program Files\Babel\babel.exe "C:\Patch\v6\Demo\Bin\Lib.dll" --rules "C:\Patch\babelRules.xml", 600) Here's a common script to execute a CMD prompt in C#. However if I just include the Babel.Build.dll in my winform I may be able to do it seamlessly. public static int ExecuteCommand(string Command, int Timeout) { int ExitCode; ProcessStartInfo ProcessInfo; Process Process; ProcessInfo = new ProcessStartInfo("cmd.exe", "/C " + Command); ProcessInfo.CreateNoWindow = true; ProcessInfo.UseShellExecute = false; Process = Process.Start(ProcessInfo); Process.WaitForExit(Timeout); ExitCode = Process.ExitCode; Process.Close(); return ExitCode; }

  Read the article

• Fibonacci sequence subroutine returning one digit too high...PERL

  - by beProactive

  #!/usr/bin/perl -w use strict; sub fib { my($num) = @_; #give $num to input array return(1) if ($num<=1); #termination condition return($num = &fib($num-1) + &fib($num-2)); #should return sum of first "n" terms in the fibonacci sequence } print &fib(7)."\n"; #should output 20 This subroutine should be outputting a summation of the first "x" amount of terms, as specified by the argument to the sub. However, it's one too high. Does this have something to do with the recursion? Thanks.

  Read the article

• ImageMagick and Grails not working

  - by TripWired

  I'm trying to have ImageMagick run from grails to convert some images when I run the command to make an image nothing happens. I get no errors, no information returned nothing at all. I've tried running other commands like touch and ps ux just to see if they work and they all work fine. It just seems like the imagemagick commands are getting lost and I''m not sure what to do. Here is the code I've been working with. String command = CH.config.ImageMagickPath + "/convert -size 40x20 xc:red xc:blue -append -rotate 90 append_rotate.gif" println command command.execute() CH.config.ImageMagickPath is set up to where imagemagick/bin is. I've taken what is shown in println command and run it in a terminal and it works fine. Is there any reason why I can't get IM to work from grails?

  Read the article

• RMIC task failing with base not supported

  - by Aaron

  I am running the following target in my build.xml <target name="rmiserver"> <rmic base="../bin" classname="com.deleted.ctiv.remote.IvProvisionerResponseImpl"></rmic> </target> and I get the following error [startAnt] [exec] BUILD FAILED [startAnt] [exec] /home/gtaadm/gta/tomcat-5.5.20-8/webapps/taiga-2.0/project/working/EBIG_1.1/revision-1722/build.xml:44: The following error occurred while executing this line: [startAnt] [exec] /home/gtaadm/gta/tomcat-5.5.20-8/webapps/taiga-2.0/project/working/EBIG_1.1/revision-1722/ebig/ear/build.xml:57: The <rmic> type doesn't support the "base" attribute. It works when I run it eclipse, but not in my automated build environment.

  Read the article

• killall httpd for sleep process

  - by user172697

  Hello guys this shell explain the issue , after executing the .sh file halt and nothing happen , any clue where is my mistake its kill httpd if there is more than 10 sleep process and start the httpd with zero sleep process #!/bin/bash #this means loop forever while [ 1 ]; do HTTP=`ps auwxf | grep httpd | grep -v grep | wc -l`; #the above line counts the number of httpd processes found running #and the following line says if there were less then 10 found running if [ $[HTTP] -lt 10 ]; then killall -9 httpd; #inside the if now, so there are less then 10, kill them all and wait 1 second sleep 1; #start apache /etc/init.d/httpd start; fi; #all done, sleep for ten seconds before we loop again sleep 10;done

  Read the article

• "Failed to find or load the registered .Net Framework Data Provider" with MySQL + ASP.NET

  - by Malachi

  How do we repair this? This question has been sort of addressed many times around the internet, but it's always a workaround. Always copying the MySql.data.dll into your bin directory, or explicitly stating what version you want. What is the "proper" approach to using DbProvderFactory for MySQL with ASP.NET? I'd like to be able to develop locally and not worry what version they have installed on the server. As it stands, if I do copy up my own version I have to make sure it's the one they use. Seems easy to break.

  Read the article

• bash: flushing stdin (standard input)

  - by rahul

  I have a bash script that gets some input as stdin. After processing, I copy a file using "-i" (interactive). However, this never gets executed since (I guess) standard input has not been flushed. To simplify with an example: #!/bin/bash while read line do echo $line done # the next line does not execute read -p "y/n" x echo "got $x" Place this in t.sh, and execute with: ls | ./t.sh The read is not executed. I need to flush stdin before the read. How could it do this?

  Read the article

• How do I get the output of Win32::Process command in Perl?

  - by rockyurock

  I am using use Win32::Process for my application run as below. It runs fine, but I did not get any way to get the output to a .txt file. I used NORMAL_PRIORITY_CLASS rather than CREATE_NEW_CONSOLE to get the output on the same terminal itself, but I don't know how to redirect it to a txt file. /rocky #!/usr/bin/perl use strict; use warnings; use Win32::Process; Win32::Process::Create(my $ProcessObj, "iperf.exe", "iperf.exe -u -s -p 5001", 0, NORMAL_PRIORITY_CLASS, ".") || die ErrorReport(); my @command_output; push @command_output,$ProcessObj; open FILE, ">zz.txt" or die $!; print FILE @command_output; close FILE; sleep 10; $ProcessObj->Kill(0); sub ErrorReport{ print Win32::FormatMessage( Win32::GetLastError() ); }

  Read the article

• Debugging of native code

  - by graham.reeds

  I have a C# Service that is calling a C DLL that was originally written in VC6. There is a bug in the DLL which I am trying to inspect. After having a nightmare trying to get debug to work I eventually added the dll to the VS2005 solution containing the C# Service and added the necessary _CRT_SECURE_NO_WARNINGS. The debug version of the service is registered using 'installutil.exe' tool. I can get the debugger to break just before the line where the dll is entered via a call to System.Diagnostics.Debugger.Break();. I found some instruction on the net regarding stepping into debugging unmanaged code, and enabled the 'Enable unmanaged code debugging' check box, I've also tried turning on the Options-Debugging-Native 'Load DLL exports' and 'Enable RPC Debugging' (even though it's not COM). I've also copied the debug dll and .pdb to the same bin directory as the However the unmanaged code is not being stepped into which is what I really need. UPDATE: I found the Debugging Type in the DLL properties and set it to 'Mixed' as per suggestion on several sites but to no avail.

  Read the article

• Best practise question

  - by sid_com

  Hello! With version would you prefer? #!/usr/bin/env perl use warnings; use strict; use 5.010; my $p = 7; # 33 my $prompt = ' : '; my $key = 'very important text'; my $value = 'Hello, World!'; my $length = length $key . $prompt; $p -= $length; Option 1: $key = $key . ' ' x $p . $prompt; Option 2: if ( $p > 0 ) { $key = $key . ' ' x $p . $prompt; } else { $key = $key . $prompt; } say "$key$value"

  Read the article

• Where is the default language data stored in OS 10.6

  - by George Baugh

  From a shell in 10.4 or 10.5, I was able to do this: /usr/bin/defaults read NSGlobalDomain AppleLanguages To get the list of the language preference for that particular machine. This was done so that I could restore it back to that list after changing it with the 'defaults write' command to something else (in order to help automate l10n testing). Now, along comes OS 10.6, and AppleLanguages is nowhere in any of our defaults domains. I know that I can alter it for each running application by altering their specific property lists...but at the cost of more complexity. Also, some of the apps I have under test here are installer packages...and It's a real pain to change stuff (like the .plist I'd have to change here) in those without being somewhat destructive; that's why I chose to do it globally in the first place. Anyways, it'd be great if I could find where they stashed it now...or if they deprecated it (like a zillion other things in OS 10.6) completely.

  Read the article

• Passing Text for command line

  - by Kasun

  Hi, I need to pass some text which is in richtext box to command line. This is my Button click even which start the cmd. private void button1_Click(object sender, EventArgs e) { ProcessStartInfo psi = new ProcessStartInfo { FileName = "cmd", Arguments = @"/k ""C:\Program Files\Microsoft Visual Studio 9.0\VC\bin\vcvars32.bat""", }; Process.Start(psi); } In my rich text box contain following text. include iostream using namespace std; int main() { cout << "Welcome to the wonderful world of C++!!!\n"; return 0; } Can anyone provide me necessary codes.

  Read the article

• input of while loop to come from output of `command`

  - by Felipe Alvarez

  #I used to have this, but I don't want to write to the disk # pcap="somefile.pcap" tcpdump -n -r $pcap > all.txt while read line; do ARRAY[$c]="$line" c=$((c+1)) done < all.txt The following fails to work. # I would prefer something like... # pcap="somefile.pcap" while read line; do ARRAY[$c]="$line" c=$((c+1)) done < $( tcpdump -n -r "$pcap" ) Too few results on Google (doesn't understand what I want to find :( ). I'd like to keep it Bourne-compatible (/bin/sh), but it doesn't have to be.

  Read the article

• Determing Python version at runtime

  - by Gekitsuu

  The problem I'm having is that I've written code that depends on features in python2.6 so I'm trying to build a check that will produce a useful error if someone tries to run it on a machine with python lower than 2.6. The code I put in to check for the specific version and match it should work fine but the problem I have is the interpreter on a 2.4 machine reads the file and sees a "finally" at the end of my try loop and errors out before it gets far enough into execution for my if statement to handle the version mismatch. Other than changing the magic line to specifically look for /usr/bin/python2.6 is there a way python can handle this sort of thing?

  Read the article

• DLL with JNA error looking up function?

  - by Thomas Nappo

  This is the code in my DLL (C#): http://pastebin.com/Uirn0z2V I have the DLL built and inside both the JDK bin folder along with inside my project. This is the Java code I am using to access with JNA: http://pastebin.com/NffpaEp8 Yet when I run my Java code this happens: Exception in thread "main" java.lang.UnsatisfiedLinkError: Error looking up function 'Run': The specified procedure could not be found. at com.sun.jna.Function.<init>(Function.java:179) at com.sun.jna.NativeLibrary.getFunction(NativeLibrary.java:391) at com.sun.jna.NativeLibrary.getFunction(NativeLibrary.java:371) at com.sun.jna.Library$Handler.invoke(Library.java:205) at $Proxy0.Run(Unknown Source) at RunPETest.main(RunPETest.java:18) I have no experience with using JNA with custom DLLs or creating DLLs with C#... so I'm stuck here.

  Read the article

• Automatic exit from bash shell script on error

  - by radman

  Hi, I've been writing some shell script and I would find it useful if there was the ability to halt the execution of said shell script if any of the commands failed. See below for an example: #!/bin/bash cd some_dir ./configure --some-flags make make install So in this case if the script can't change to the indicated directory then it would certainly not want to do a ./configure afterward it fails. Now I'm well aware that I could have an if check for each command (which I think is a hopeless solution), but is there a global setting to make the script exit if one of the commands fails?

  Read the article

• How can I extend PHP DOMElement?

  - by Michael Tsang

  a.php #!/usr/bin/php <?php class HtmlTable extends DOMElement { public function __construct($height, $width) { parent::__construct("table"); for ($i = 0; $i < $height; ++$i) { $row = $this->appendChild(new DOMElement("tr")); for($j = 0; $j < $width; ++$j) { $row->appendChild(new DOMElement("td")); } } } } $document = new DOMDocument("1.0", "UTF-8"); $document->registerNodeClass("DOMElement", "HtmlTable"); $document->appendChild(new HtmlTable(3, 2)); $document->saveXML(); Running it gets Fatal error: Uncaught exception 'DOMException' with message 'No Modification Allowed Error' in /home/www/a.php:9 Stack trace: #0 /home/www/a.php(9): DOMNode->appendChild(Object(DOMElement)) #1 /home/www/a.php(19): HtmlTable->__construct(3, 2) #2 {main} thrown in /home/www/a.php on line 9

  Read the article

< Previous Page | 246 247 248 249 250 251 252 253 254 255 256 257  | Next Page >