Search Results

Search found 6706 results on 269 pages for 'power supply'.

Page 251/269 | < Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• #OOW 2012 @PARIS...talking Oracle and Clouds, and Optimized Datacenter

  - by Eric Bezille

  For those of you who want to get most out of Oracle technologies to evolve your IT to the Next Wave, I encourage you to register to the up coming Oracle Optimized Datacenter event that will take place in Paris on November 28th. You will get the opportunity to exchange with Oracle experts and customers having successfully evolve their IT by leveraging Oracle technologies. You will also get the latest news on some of the Oracle systems announcements made during OOW 2012. During this event we will make an update about Oracle and Clouds, from private to public and hybrid models. So in preparing this session, I thought it was a good start to make a status of Cloud Computing in France, and CIO requirements in particular. Starting in 2009 with the first Cloud Camp in Paris, the market has evolved, but the basics are still the same : think hybrid. From Traditional IT to Clouds One size doesn't fit all, and for big companies having already an IT in place, there will be parts eligible to external (public) cloud, and parts that would be required to stay inside the firewalls, so ability to integrate both side is key.  None the less, one of the major impact of Cloud Computing trend on IT, reported by Forrester, is the pressure it makes on CIO to evolve towards the same model that end-users are now used to in their day to day life, where self-service and flexibility are paramount. This is what is driving IT to transform itself toward "a Global Service Provider", or for some as "IT "is" the Business" (see : Gartner Identifies Four Futures for IT and CIO), and for both models toward a Private Cloud Service Provider. In this journey, there is still a big difference between most of existing external Cloud and a firm IT : the number of applications that a CIO has to manage. Most cloud providers today are overly specialized, but at the end of the day, there are really few business processes that rely on only one application. So CIOs has to combine everything together external and internal. And for the internal parts that they will have to make them evolve to a Private Cloud, the scope can be very large. This will often require CIOs to evolve from their traditional approach to more disruptive ones, the time has come to introduce new standards and processes, if they want to succeed. So let's have a look at the different Cloud models, what type of users they are addressing, what value they bring and most importantly what needs to be done by the  Cloud Provider, and what is left over to the user. IaaS, PaaS, SaaS : what's provided and what needs to be done First of all the Cloud Provider will have to provide all the infrastructure needed to deliver the service. And the more value IT will want to provide, the more IT will have to deliver and integrate : from disks to applications. As we can see in the above picture, providing pure IaaS, left a lot to cover for the end-user, that’s why the end-user targeted by this Cloud Service is IT people. If you want to bring more value to developers, you need to provide to them a development platform ready to use, which is what PaaS is standing for, by providing not only the processors power, storage and OS, but also the Database and Middleware platform. SaaS being the last mile of the Cloud, providing an application ready to use by business users, the remaining part for the end-users being configuring and specifying the application for their specific usage. In addition to that, there are common challenges encompassing all type of Cloud Services : Security : covering all aspect, not only of users management but also data flows and data privacy Charge back : measuring what is used and by whom Application management : providing capabilities not only to deploy, but also to upgrade, from OS for IaaS, Database, and Middleware for PaaS, to a full Business Application for SaaS. Scalability : ability to evolve ALL the components of the Cloud Provider stack as needed Availability : ability to cover “always on” requirements Efficiency : providing a infrastructure that leverage shared resources in an efficient way and still comply to SLA (performances, availability, scalability, and ability to evolve) Automation : providing the orchestration of ALL the components in all service life-cycle (deployment, growth & shrink (elasticity), upgrades,...) Management : providing monitoring, configuring and self-service up to the end-users Oracle Strategy and Clouds For CIOs to succeed in their Private Cloud implementation, means that they encompass all those aspects for each component life-cycle that they selected to build their Cloud. That’s where a multi-vendors layered approach comes short in terms of efficiency. That’s the reason why Oracle focus on taking care of all those aspects directly at Engineering level, to truly provide efficient Cloud Services solutions for IaaS, PaaS and SaaS. We are going as far as embedding software functions in hardware (storage, processor level,...) to ensure the best SLA with the highest efficiency. The beauty of it, as we rely on standards, is that the Oracle components that you are running today in-house, are exactly the same that we are using to build Clouds, bringing you flexibility, reversibility and fast path to adoption. With Oracle Engineered Systems (Exadata, Exalogic & SPARC SuperCluster, more specifically, when talking about Cloud), we are delivering all those components hardware and software already engineered together at Oracle factory, with a single pane of glace for the management of ALL the components through Oracle Enterprise Manager, and with high-availability, scalability and ability to evolve by design. To give you a feeling of what does that bring in terms just of implementation project timeline, for example with Oracle SPARC SuperCluster, we have a consistent track of record to have the system plug into existing Datacenter and ready in a week. This includes Oracle Database, OS, virtualization, Database Storage (Exadata Storage Cells in this case), Application Storage, and all network configuration. This strategy enable CIOs to very quickly build Cloud Services, taking out not only the complexity of integrating everything together but also taking out the automation and evolution complexity and cost. I invite you to discuss all those aspect in regards of your particular context face2face on November 28th.

  Read the article

• Microsoft BUILD 2013 Day 1&ndash;Keynote

  - by Tim Murphy

  Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013-day-1ndashkeynote.aspx This one is going to be a little long because the keynote was jam-packed so bare with me. The keynote for the first day of BUILD 2013 was kicked off by Steve Balmer.  He made it very clear that Microsoft’s focus is on accelerating its time to market with products and product updates.  His quote was that “Rapid release” is the new norm.  He continued by showing off several new Lumias that have been buzzing around the internet for a while and announce that Sprint will now be carrying the HTC 8XT and Samsung ATIV. Balmer is known for repeating words or phrase for affect.  This time it was “Rapid release, rapid release” and “Touch, touch, touch, touch, touch, …”.  This was fun, but even more fun was when he announce that all attendees would receive an Acer Iconia 8” tablet. SCORE! The next subject Balmer focused on is new apps.  The three new ones were Flipboard, Facebook and NFL Fantasy Football.  I liked the first two because these are ones that people coming from other platforms are missing.  The NFL app is great just because it targets a demographic that can be fanatical.  If these types of apps keep coming than the missing app argument goes away. While many Negative Nancy’s are describing Windows 8.1 as Windows 180 Steve Balmer chose to call it a “refined blend” as in a coffee that has been improved with a new mix.  This includes more multi-tasking options and leveraging Bing straight throughout the entire ecosystem. He ended this first section by explaining that this will also bring more Bing development opportunities to the community. Steve Balmer was followed by Julie Larson-Green who spent her time on stage selling us on Windows 8 all over again from my point of view.  Something that I would not have thought was needed until I had listened to some other attendees who had a number of concerns and complaints.  She showed a number of new gestures that will come with Windows 8.1, and while they were cool I was left wondering if they really improved the experience.  I guess only time will tell. I did like the fact that it the UI implementation to bring up “All Apps” now mirrors that of Windows Phone.  The consistency is a big step forward that I hope to see continue.  The cool factor went up from there as she swiped content from a desktop (mega-tablet) to the XBox One.  This seamless experience I believe is what is really needed for any future platform to be relevant. I was much more enthused by the presentation of Antoine Leblond who humbled us by letting us know that there are 5k new API.  How that can be or how anyone would ever use all of them is another question.  His announcement was that the Visual Studio 2013 preview would be available today along with the Windows 8.1 bits.  One of the features of VS2013 that he demonstrated is the power consumption profiler.  With battery life being a key factor with consumer consumption devices this is a welcome addition. He didn’t limit his presentation to VS2013 features though.  He showed how the Store has been redesigned to enable better search and discoverability of apps and how Win 8.1 can perform multiple screen scales depending on the resolution of the device automatically.  The last feature he demoed was the real time video streaming API which he made sure we understood by attaching a Surface to a little robot.  Oh, but there was one more thing.  Antoine and Julie announce that all attendees would also be getting Surface Pros.  BONUS! How much more could there be?  Gurdeep Singh Pall was about to pile on.  He introduced us to Bing as a platform (BaaP?).  He said if they (Microsoft) could do something with and API that is good 3rd party developers can do something that is dynamite and showed us some of the tools they had produced.  These included natural user interface improvements such as voice commands that looked to put Siri to shame.  Add to that 3D, OCR and translation capabilities and the future looks to be full of opportunities. Balmer then came out to show us one last thing.  Project Spark is a game design environment that will be available for Windows 8.1, XBox 360 and XBox One.  All I can say is that if my kids get their hands on this they are going to be able to learn some of what dad does in a much more enjoyable way. At the end of it all I was both exhausted and energized by what I saw.  What could they have possibly left for the day 2 keynote?  I hear it will feature Scott Hanselman.  If that is right we are in for a treat.  See you there. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote,Bing,Visual Studio 2013,Project Spark

  Read the article

• Computer Networks UNISA - Chap 8 &ndash; Wireless Networking

  - by MarkPearl

  After reading this section you should be able to Explain how nodes exchange wireless signals Identify potential obstacles to successful transmission and their repercussions, such as interference and reflection Understand WLAN architecture Specify the characteristics of popular WLAN transmission methods including 802.11 a/b/g/n Install and configure wireless access points and their clients Describe wireless MAN and WAN technologies, including 802.16 and satellite communications The Wireless Spectrum All wireless signals are carried through the air by electromagnetic waves. The wireless spectrum is a continuum of the electromagnetic waves used for data and voice communication. The wireless spectrum falls between 9KHZ and 300 GHZ. Characteristics of Wireless Transmission Antennas Each type of wireless service requires an antenna specifically designed for that service. The service’s specification determine the antenna’s power output, frequency, and radiation pattern. A directional antenna issues wireless signals along a single direction. An omnidirectional antenna issues and receives wireless signals with equal strength and clarity in all directions The geographical area that an antenna or wireless system can reach is known as its range Signal Propagation LOS (line of sight) uses the least amount of energy and results in the reception of the clearest possible signal. When there is an obstacle in the way, the signal may… pass through the object or be obsrobed by the object or may be subject to reflection, diffraction or scattering. Reflection – waves encounter an object and bounces off it. Diffraction – signal splits into secondary waves when it encounters an obstruction Scattering – is the diffusion or the reflection in multiple different directions of a signal Signal Degradation Fading occurs as a signal hits various objects. Because of fading, the strength of the signal that reaches the receiver is lower than the transmitted signal strength. The further a signal moves from its source, the weaker it gets (this is called attenuation) Signals are also affected by noise – the electromagnetic interference) Interference can distort and weaken a wireless signal in the same way that noise distorts and weakens a wired signal. Frequency Ranges Older wireless devices used the 2.4 GHZ band to send and receive signals. This had 11 communication channels that are unlicensed. Newer wireless devices can also use the 5 GHZ band which has 24 unlicensed bands Narrowband, Broadband, and Spread Spectrum Signals Narrowband – a transmitter concentrates the signal energy at a single frequency or in a very small range of frequencies Broadband – uses a relatively wide band of the wireless spectrum and offers higher throughputs than narrowband technologies The use of multiple frequencies to transmit a signal is known as spread-spectrum technology. In other words a signal never stays continuously within one frequency range during its transmission. One specific implementation of spread spectrum is FHSS (frequency hoping spread spectrum). Another type is known as DSS (direct sequence spread spectrum) Fixed vs. Mobile Each type of wireless communication falls into one of two categories Fixed – the location of the transmitted and receiver do not move (results in energy saved because weaker signal strength is possible with directional antennas) Mobile – the location can change WLAN (Wireless LAN) Architecture There are two main types of arrangements Adhoc – data is sent directly between devices – good for small local devices Infrastructure mode – a wireless access point is placed centrally, that all devices connect with 802.11 WLANs The most popular wireless standards used on contemporary LANs are those developed by IEEE’s 802.11 committee. Over the years several distinct standards related to wireless networking have been released. Four of the best known standards are also referred to as Wi-Fi. They are…. 802.11b 802.11a 802.11g 802.11n These four standards share many characteristics. i.e. All 4 use half duplex signalling Follow the same access method Access Method 802.11 standards specify the use of CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) to access a shared medium. Using CSMA/CA before a station begins to send data on an 802.11 network, it checks for existing wireless transmissions. If the source node detects no transmission activity on the network, it waits a brief period of time and then sends its transmission. If the source does detect activity, it waits a brief period of time before checking again. The destination node receives the transmission and, after verifying its accuracy, issues an acknowledgement (ACT) packet to the source. If the source receives the ACK it assumes the transmission was successful, – if it does not receive an ACK it assumes the transmission failed and sends it again. Association Two types of scanning… Active – station transmits a special frame, known as a prove, on all available channels within its frequency range. When an access point finds the probe frame, it issues a probe response. Passive – wireless station listens on all channels within its frequency range for a special signal, known as a beacon frame, issued from an access point – the beacon frame contains information necessary to connect to the point. Re-association occurs when a mobile user moves out of one access point’s range and into the range of another. Frames Read page 378 – 381 about frames and specific 802.11 protocols Bluetooth Networks Sony Ericson originally invented the Bluetooth technology in the early 1990s. In 1998 other manufacturers joined Ericsson in the Special Interest Group (SIG) whose aim was to refine and standardize the technology. Bluetooth was designed to be used on small networks composed of personal communications devices. It has become popular wireless technology for communicating among cellular telephones, phone headsets, etc. Wireless WANs and Internet Access Refer to pages 396 – 402 of the textbook for details.

  Read the article

• "Attach or Add an entity that is not new...loaded from another DataContext. This is not supported."

  - by sah302

  Similar error as other questions, but not quite the same, I am not trying to attach anything. What I am trying to do is insert a new row into a linking table, specifically UserAccomplishment. Relations are set in LINQ to User and Accomplishment Tables. I have a generic insert function: Public Function insertRow(ByVal entity As ImplementationType) As Boolean If entity IsNot Nothing Then Dim lcfdatacontext As New LCFDataContext() Try lcfdatacontext.GetTable(Of ImplementationType)().InsertOnSubmit(entity) lcfdatacontext.SubmitChanges() lcfdatacontext.Dispose() Return True Catch ex As Exception Return False End Try Else Return False End If End Function If you try and give UserAccomplishment the two appropriate objects this will naturally crap out if either the User or Accomplishment already exist. It only works when both user and accomplishment don't exist. I expected this behavior. What does work is simply giving the userAccomplishment object a user.id and accomplishment.id and populating the rest of the fields. This works but is kind of awkward to use in my app, it would be much easier to simply pass in both objects and have it work out what already exists and what doesn't. Okay so I made the following (please ignore the fact that this is horribly inefficient because I know it is): Public Class UserAccomplishmentDao Inherits EntityDao(Of UserAccomplishment) Public Function insertLinkerObjectRow(ByVal userAccomplishment As UserAccomplishment) Dim insertSuccess As Boolean = False If Not userAccomplishment Is Nothing Then Dim userDao As New UserDao() Dim accomplishmentDao As New AccomplishmentDao() Dim user As New User() Dim accomplishment As New Accomplishment() 'see if either object already exists in db' user = userDao.getOneByValueOfProperty("Id", userAccomplishment.User.Id) accomplishment = accomplishmentDao.getOneByValueOfProperty("Id", userAccomplishment.Accomplishment.Id) If user Is Nothing And accomplishment Is Nothing Then 'neither the user or the accomplishment exist, both are new so insert them both, typical insert' insertSuccess = Me.insertRow(userAccomplishment) ElseIf user Is Nothing And Not accomplishment Is Nothing Then 'user is new, accomplishment is not new, so just insert the user, and the relation in userAccomplishment' Dim userWithExistingAccomplishment As New UserAccomplishment(userAccomplishment.User, userAccomplishment.Accomplishment.Id, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(userWithExistingAccomplishment) ElseIf Not user Is Nothing And accomplishment Is Nothing Then 'user is not new, accomplishment is new, so just insert the accomplishment, and the relation in userAccomplishment' Dim existingUserWithAccomplishment As New UserAccomplishment(userAccomplishment.UserId, userAccomplishment.Accomplishment, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(existingUserWithAccomplishment) Else 'both are not new, just add the relation' Dim userAccomplishmentBothExist As New UserAccomplishment(userAccomplishment.User.Id, userAccomplishment.Accomplishment.Id, userAccomplishment.LastUpdatedBy) insertSuccess = Me.insertRow(userAccomplishmentBothExist) End If End If Return insertSuccess End Function End Class Alright, here I basically check if the supplied user and accomplishment already exists in the db, and if so call an appropriate constructor that will leave whatever already exists empty, but supply the rest of the information so the insert can succeed. However, upon trying an insert: Dim result As Boolean = Me.userAccomplishmentDao.insertLinkerObjectRow(userAccomplishment) In which the user already exists, but the accomplishment does not (the 99% typical scenario) I get the error: "An attempt has been made to Attach or Add an entity that is not new, perhaps having been loaded from another DataContext. This is not supported." I have debugged this multiple times now and am not sure why this is occuring, if either User or Accomplishment exist, I am not including it in the final object to try to insert. So nothing appears to be attempted to be added. Even in debug, upon insert, the object was set to empty. So the accomplishment is new and the user is empty. 1) Why is it still saying that and how can I fix it ..using my current structure 2) Pre-emptive 'use repository pattern answers' - I know this way kind of sucks in general and I should be using the repository pattern. However, I can't use that in the current project because I don't have time to refactor that due to my non existence knowledge of it and time constraints. The usage of the app is going to so small that the inefficient use of datacontext's and what have you won't matter so much. I can refactor it once it's up and running, but for now I just need to 'push through' with my current structure. Edit: I also just tested this when having both already exists, and only insert each object's IDs into the table, that works. So I guess I could manually insert whichever object doesn't exist as a single insert, then put the ids only into the linking table, but I still don't know why when one object exists, and I make it empty, it doens't work.

  Read the article

• Gamification = -10#/3mo

  - by erikanollwebb

  One of the purposes of gamification of anything is to see if you can modify the behavior of the user. In the enterprise, that might mean getting sales people to enter more information into a CRM system, encouraging employees to update their HR records, motivating people to participate in forums and discussions, or process invoices more quickly.  Wikipedia defines behavior modification as "the traditional term for the use of empirically demonstrated behavior change techniques to increase or decrease the frequency of behaviors, such as altering an individual's behaviors and reactions to stimuli through positive and negative reinforcement of adaptive behavior and/or the reduction of behavior through its extinction, punishment and/or satiation."  Gamification is just a way to modify someone's behavior using game mechanics. And the magic question is always whether it works. So I thought I would present my own little experiment from the last few months.  This spring, I upgraded to a Samsung Galaxy 4.  It's a pretty sweet phone in many ways, but one of the little extras I discovered was a built in app called S Health. S Health is an app that you can use to track calories, weight, exercise and it has a built in pedometer. I looked at it when I got the phone, but assumed you had to turn it on to use it so I didn't look at it much.  But sometime in July, I realized that in fact, it just ran in the background and was quietly tracking my steps, with a goal of 10,000 per day.  10,000 steps per day is this magic number recommended by the Surgeon General and the American Heart Association.  Dr. Oz pushes it as the goal for daily exercise.  It's about 5 miles of walking. I'm generally not the kind of person who always has my phone with me.  I leave it in my purse and pull it out when I need it.  But then I realized that meant I wasn't getting a good measure of my steps.  I decided to do a little experiment, and carry it with me as much as possible for a week.  That's when I discovered the gamification that changed my life over the last 3 months.  When I hit 10,000 steps, the app jingled out a little "success!" tune and I got a badge.  I was hooked.  I started carrying my phone.  I started making sure I had shoes I could walk in with me.  I started walking at lunch time, because I realized how often I sat at my desk for 8-10 hours every day without moving.  I started pestering my husband to walk with me after work because I hadn't hit my 10,000 yet, leading him at one point to say "I'm not as much a slave to that badge as you are!"  I started looking at parking lots differently.  Can't get a space up close?  No worries, just that many steps toward my 10,000.  I even tried to see if there was a second power user level at 15,000 or 20,000 (*sadly, no).  If I was close at the end of the day, I have done laps around my house until I got my badge.  I have walked around the block one more time to get my badge.  I have mentally chastised myself when I forgot to put my phone in my pocket because I don't know how many steps I got.  The badge below I got when my boss and I were in New York City and we walked around the block of our hotel just to watch the badge pop up. There are a bunch of tools out on the market now that have similar ideas for helping you to track your exercise, make it social.  There are apps (my favorite is still Zombies, Run!).  You could buy a FitBit or UP by Jawbone.   Interactive fitness makes the Expresso stationary bike with built in video games.  All designed to help you be more aware of your activity and keep you engaged and motivated.  And the idea is to help you change your behavior. I know someone who would spend extra time and work hard on the Expresso because he had built up strategies for how to kill the most dragons while he was riding to get more points.  When the machine broke down, he didn't ride a different bike because it just wasn't that interesting. But for me, just the simple jingle and badge have been all I needed.  I admit, I still giggle gleefully when I hear the tune sing out from my pocket. After a few weeks, I noticed I had dropped a few pounds.  Not a lot, just 2-3.  But then I was really hooked.  I started making a point both to eat a little less and hit 10,000 steps as much as I could.  I bemoaned that during the floods in Boulder, I wasn't hitting my 10,000 steps.  And now, a few months later, I'm almost 10 lbs lighter. All for 1 badge a day. So yes, simple gamification can increase motivation and engagement.  And that can lead to changes in behavior.  Now the job is to apply that to the enterprise space in a meaningful and engaging way. 

  Read the article

• MERGE gives better OUTPUT options

  - by Rob Farley

  MERGE is very cool. There are a ton of useful things about it – mostly around the fact that you can implement a ton of change against a table all at once. This is great for data warehousing, handling changes made to relational databases by applications, all kinds of things. One of the more subtle things about MERGE is the power of the OUTPUT clause. Useful for logging.   If you’re not familiar with the OUTPUT clause, you really should be – it basically makes your DML (INSERT/DELETE/UPDATE/MERGE) statement return data back to you. This is a great way of returning identity values from INSERT commands (so much better than SCOPE_IDENTITY() or the older (and worse) @@IDENTITY, because you can get lots of rows back). You can even use it to grab default values that are set using non-deterministic functions like NEWID() – things you couldn’t normally get back without running another query (or with a trigger, I guess, but that’s not pretty). That inserted table I referenced – that’s part of the ‘behind-the-scenes’ work that goes on with all DML changes. When you insert data, this internal table called inserted gets populated with rows, and then used to inflict the appropriate inserts on the various structures that store data (HoBTs – the Heaps or B-Trees used to store data as tables and indexes). When deleting, the deleted table gets populated. Updates get a matching row in both tables (although this doesn’t mean that an update is a delete followed by an inserted, it’s just the way it’s handled with these tables). These tables can be referenced by the OUTPUT clause, which can show you the before and after for any DML statement. Useful stuff. MERGE is slightly different though. With MERGE, you get a mix of entries. Your MERGE statement might be doing some INSERTs, some UPDATEs and some DELETEs. One of the most common examples of MERGE is to perform an UPSERT command, where data is updated if it already exists, or inserted if it’s new. And in a single operation too. Here, you can see the usefulness of the deleted and inserted tables, which clearly reflect the type of operation (but then again, MERGE lets you use an extra column called $action to show this). (Don’t worry about the fact that I turned on IDENTITY_INSERT, that’s just so that I could insert the values) One of the things I love about MERGE is that it feels almost cursor-like – the UPDATE bit feels like “WHERE CURRENT OF …”, and the INSERT bit feels like a single-row insert. And it is – but into the inserted and deleted tables. The operations to maintain the HoBTs are still done using the whole set of changes, which is very cool. And $action – very convenient. But as cool as $action is, that’s not the point of my post. If it were, I hope you’d all be disappointed, as you can’t really go near the MERGE statement without learning about it. The subtle thing that I love about MERGE with OUTPUT is that you can hook into more than just inserted and deleted. Did you notice in my earlier query that my source table had a ‘src’ field, that wasn’t used in the insert? Normally, this would be somewhat pointless to include in my source query. But with MERGE, I can put that in the OUTPUT clause. This is useful stuff, particularly when you’re needing to audit the changes. Suppose your query involved consolidating data from a number of sources, but you didn’t need to insert that into the actual table, just into a table for audit. This is now very doable, either using the INTO clause of OUTPUT, or surrounding the whole MERGE statement in brackets (parentheses if you’re American) and using a regular INSERT statement. This is also doable if you’re using MERGE to just do INSERTs. In case you hadn’t realised, you can use MERGE in place of an INSERT statement. It’s just like the UPSERT-style statement we’ve just seen, except that we want nothing to match. That’s easy to do, we just use ON 1=2. This is obviously more convoluted than a straight INSERT. And it’s slightly more effort for the database engine too. But, if you want the extra audit capabilities, the ability to hook into the other source columns is definitely useful. Oh, and before people ask if you can also hook into the target table’s columns... Yes, of course. That’s what deleted and inserted give you.

  Read the article

• EM CLI, diving in and beyond!

  - by Maureen Byrne

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Doing more in less time… Isn’t that what we all strive to do? With this in mind, I put together two screen watches on Oracle Enterprise Manager 12c command line interface, or EM CLI as it is also known. There is a wealth of information on any topic that you choose to read about, from manual pages to coding documents…might I even say blog posts? In our busy lives it is so nice to just sit back with a short video, watch and learn enough to dive in. Doing more in less time, is the essence of EM CLI. It enables you to script fundamental and complex administrative tasks in an elegant way, thanks to the Jython scripting language. Repetitive tasks can be scripted and reused again and again. Sure, a Graphical User Interface provides a more intuitive step by step approach to tasks, and it provides a way of quickly becoming familiar with a product and its many features, and it is definitely the way to go when viewing performance data and historical trending…but for repetitive and complex tasks, scripting is the way to go! Lets us take the everyday task of creating an administrator. Using EM CLI in interactive mode the command could look like this.. emcli>create_user(name='jan.doe', type='EXTERNAL_USER') This command creates an administrator called jan.doe which is an externally authenticated user, possibly LDAP or SSO, defined by the EXTERNAL_USER tag. The create_user procedure takes many arguments; see the documentation for more information. Now, where EM CLI really shines and shows power is in creating multiple users. Regardless of the number, tens or thousands, the effort is the same. With the use of a standard programming construct, a loop, you can place your create_user() procedure within it. Using a loop allows you to iterate through a previously created list, creating new users until the list is complete. Using EM CLI in Script mode, your Jython loop would look something like this… for user in list_of_users:       create_user(name=user, expire=’true’, password=’welcome123’) This Jython code snippet iterates through a previously defined list of names, list_of_users, and iterates through the list, taking each name, user in this case, and creates an administrator sets the password to welcome123, but forces the user to reset it when they first login. This is only one of over four hundred procedures created to expose Oracle Enterprise Manager 12c functionality in a powerful and programmatic way. It is a few months since we released EM CLI with scripting option. We are seeing many users adapt to this fun and powerful way of using Oracle Enterprise Manager 12c. What are the first steps? Watch these screen watches, and dive in. The first screen watch steps you through where and how to download and install and how to run your first few commands. The Second screen watch steps you through a few scripts. Next time, I am going to show you the basic building blocks to writing a Jython script to perform Oracle Enterprise Manager 12c administrative tasks. Join this growing group of EM CLI users…. Dive in! Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• SharePoint 2010 Diagnostic Studio Remote Diag

  - by juanlarios

  I have had some time this week to try out some tools that I have been meaning to try out. This week I am trying out the SP 2010 Diagnostic Studio. I installed it successfully and tried it on my development evironment. I was able to build a report and a snapshot of the environment. I decided to turn my attention to my Employer's intranet environment. This would allow me to analyze it and measure it against benchmarks. I didn't want to install the Diagnostic studio on the Production Envorinment, lucky for me, the Diagnostic studio can be run remotely, well...kind of. Issue My development environment is a stand alone, full installation of SharePoint 2010 Server. It has Office 2010, SQL 2008 Enterprise, a DC...well you get the point, it's jammed packed! But more importantly it's a stand alone, self contained VM environment. Well Microsoft has instructions as to how to connect remotely with Diagnostic Studio here. The deciving part of this is that the SP2010DS prompts you for credentails. So I thought I was getting the right account to run the reports. I tried all the Power Shell commands in the link above but I still ended up getting the following errors: 06/28/2011 12:50:18    Connecting to remote server failed with the following error message : The WinRM client cannot process the request...If the SPN exists, but CredSSP cannot use Kerberos to validate the identity of the target computer and you still want to allow the delegation of the user credentials to the target computer, use gpedit.msc and look at the following policy: Computer Configuration -> Administrative Templates -> System -> Credentials Delegation -> Allow Fresh Credentials with NTLM-only Server Authentication.  Verify that it is enabled and configured with an SPN appropriate for the target computer. For example, for a target computer name "myserver.domain.com", the SPN can be one of the following: WSMAN/myserver.domain.com or WSMAN/*.domain.com. Try the request again after these changes. For more information, see the about_Remote_Troubleshooting Help topic. 06/28/2011 12:54:47    Access to the path '\\<targetserver>\C$\Users\<account logging in>\AppData\Local\Temp' is denied. You might also get an error message like this: The WinRM client cannot process the request. A computer policy does not allow the delegation of the user credentials to the target computer. Explanation After looking at the event logs on the target environment, I noticed that there were a several Security Exceptions. After looking at the specifics around who was denied access, I was able to see the account that was being denied access, it was the client machine administrator account. Well of course that was never going to work!!! After some quick Googling, the last error message above will lead you to edit the Local Group Policy on the client server. And although there are instructions from microsoft around doing this, it really will not work in this scenario. Notice the Description and how it only applices to authentication mentioned? Resolution I can tell you what I did, but I wish there was a better way but I simply don't know if it's duable any other way. Because my development environment had it's own DC, I didn't really want to mess with Kerberos authentication. I would also not be smart to connect that server to the domain, considering it has it's own DC. I ended up installing SharePoint 2010 Diagnostic Studio on another Windows 7 Dev environment I have, and connected the machien to the domain. I ran all the necesary remote credentials commands mentioned here. Those commands add the group policy for you! Once I did this I was able to authenticate properly and I was able to get the reports. Conclusion   You can run SharePoint 2010 Diagnostic Studio Remotely but it will require some specific scenarions. A couple of things I should mention is that as far as I understand, SP2010 DS, will install agents on your target environment to run tests and retrieve the data. I was a Farm Administrator, and also a Server Admin on SharePoint Server. I am not 100% sure if you need all those permissions but I that's just what I have to my internal intranet.   I deally I would like to have a machine that I can have SharePoint 2010 DIagnostic Studio installed and I can run that against client environments. It appears that I will not be able to do that, unless I enable Kerberos on my Windows 7 Machine now. If you have it installed in the same way I would like to have it, please let me know, I'll keep trying to get what I'm after. Hope this helps someone out there doing the same.

  Read the article

• Finding it Hard to Deliver Right Customer Experience: Think BPM!

  - by Ajay Khanna

  Our relationship with our customers is not a just a single interaction and we should not treat it like one. A customer’s relationship with a vendor is like a journey which starts way before customer makes a purchase and lasts long after that. The journey may start with customer researching a product that may lead to the eventual purchase and may continue with support or service needs for the product. A typical customer journey can be represented as shown below: As you may notice, customers tend to use multiple channels to interact with a company throughout their journey.  They also expect that they should get consistent experience, no matter what interaction channel they may choose. Customers do not like to repeat the information they have already provided and expect companies to remember their preferences, and offer them relevant products and services. If the company fails to meet this expectation, customers not only will abandon the purchase and go to the competitor but may also influence others’ purchase decision. Gone are the days when word of mouth was the only medium, and the customer could influence “Six” others. This is the age of social media and customer’s good or bad experience, especially bad get highly amplified and may influence hundreds of others. Challenges that face B2C companies today include: Delivering consistent experience: The reason that delivering consistent experience is challenging is due to fragmented data, disjointed systems and siloed multichannel interactions. Customers tend to get different service quality if they use web vs. phone vs. store. They get different responses from different service agents or get inconsistent answers if they call sales vs. service group in the company. Such inconsistent experiences result in lower customer satisfaction or NPS (net promoter score) numbers. Increasing Revenue: To stay competitive companies frequently introduce new products and services. Delay in launching such offerings has a significant impact on revenue realization. In addition to new product revenue, there are multiple opportunities to up-sell and cross-sell that impact bottom line. If companies are not able to identify such opportunities, bring a product to market quickly, or not offer the right product to the right customer at the right time, significant loss of revenue may occur. Ensuring Compliance: Companies must be compliant to ever changing regulations, these could be about Know Your Customer (KYC), Export/Import regulations, or taxation policies. In addition to government agencies, companies also need to comply with the SLA that they have committed to their customers. Lapse in meeting any of these requirements may lead to serious fines, penalties and loss in business. Companies have to make sure that they are in compliance will all such regulations and SLA commitments, at any given time. With the advent of social networks and mobile technology, companies not only need to focus on process efficiency but also on customer engagement. Improving engagement means delivering the customer experience as the customer is expecting and interacting with the customer at right time using right channel. Customers expect to be able to contact you via any channel of their choice (web, email, chat, mobile, social media), purchase via any viable channel (web, phone, store, mobile). Customers expect companies to understand their particular needs and remember their preferences on repeated visits. To deliver such an integrated, consistent, and contextual experience, power of BPM in must. Your company may be organized in departments like Marketing, Sales, Service. You may hold prospect data in SFA, order information in ERP, customer issues in CRM. However, the experience delivered to the customer must not be constrained by your system legacy. BPM helps in designing the right experience for the right customer and integrates all the underlining channels, systems, applications to make sure right information will be delivered to the right knowledge worker or to the customer every single time.     Orchestrating information across all systems (MDM, CRM, ERP), departments (commerce, merchandising, marketing service) and channels (Email, phone, web, social)  is the key, and that’s what BPM delivers. In addition to orchestrating systems and channels for consistency, BPM also provides an ability for analysis and decision management. By using data from historical transactions, social media and from other systems, users can determine the customer preferences, customer value, and churn propensity. This information, in the context, is then used while making a decision at a process step. Working with real-time decision management system can also suggest right up-sell or cross-sell offers, discounts or next-best-action steps for a particular customer. Timely action on customer issues or request is also a key tenet of a good customer experience. BPM’s complex event processing capabilities help companies to take proactive actions before issues get escalated. BPM system can be designed to listen to a certain event patters then deduce from those customer situations (credit card stolen, baggage lost, change of address) and do a triage before situation goes out of control. If such a situation arises you can send alerts to right people or immediately invoke corrective actions. Last but not least one of BPM’s key values is to drive continuous improvement. Learning about customers past experiences, interactions and social conversations, provide valuable insight. Such insight can be used to improve products, customer facing processes, and customer experience. You may take these insights as an input to design better more efficient and customer friendly sales, contact center or self-service processes. If customer experience is important for your business, make sure you have incorporated BPM as a part of your strategy to design, orchestrate and improve your customer facing processes.

  Read the article

• Upgrading to Code Based Migrations EF 4.3.1 with Connector/Net 6.6

  - by GABMARTINEZ

  Entity Framework 4.3.1 includes a new feature called code first migrations.  We are adding support for this feature in our upcoming 6.6 release of Connector/Net.  In this walk-through we'll see the workflow of code-based migrations when you have an existing application and you would like to upgrade to this EF 4.3.1 version and use this approach, so you can keep track of the changes that you do to your database.   The first thing we need to do is add the new Entity Framework 4.3.1 package to our application. This should via the NuGet package manager.  You can read more about why EF is not part of the .NET framework here. Adding EF 4.3.1 to our existing application  Inside VS 2010 go to Tools -> Library Package Manager -> Package Manager Console, this will open the Power Shell Host Window where we can work with all the EF commands. In order to install this library to your existing application you should type Install-Package EntityFramework This will make some changes to your application. So Let's check them. In your .config file you'll see a  <configSections> which contains the version you have from EntityFramework and also was added the <entityFramework> section as shown below. This section is by default configured to use SQL Express which won't be necesary for this case. So you can comment it out or leave it empty. Also please make sure you're using the Connector/Net 6.6.x version which is the one that has this support as is shown in the previous image. At this point we face one issue; in order to be able to work with Migrations we need the __MigrationHistory table that we don't have yet since our Database was created with an older version. This table is used to keep track of the changes in our model. So we need to get it in our existing Database. Getting a Migration-History table into an existing database First thing we need to do to enable migrations in our existing application is to create our configuration class which will set up the MySqlClient Provider as our SQL Generator. So we have to add it with the following code: using System.Data.Entity.Migrations;     //add this at the top of your cs file public class Configuration : DbMigrationsConfiguration<NameOfYourDbContext>  //Make sure to use the name of your existing DBContext { public Configuration() { this.AutomaticMigrationsEnabled = false; //Set Automatic migrations to false since we'll be applying the migrations manually for this case. SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());     }   }  This code will set up our configuration that we'll be using when executing all the migrations for our application. Once we have done this we can Build our application so we can check that everything is fine. Creating our Initial Migration Now let's add our Initial Migration. In Package Manager Console, execute "add-migration InitialCreate", you can use any other name but I like to set this as our initial create for future reference. After we run this command, some changes were done in our application: A new Migrations Folder was created. A new class migration call InitialCreate which in most of the cases should have empty Up and Down methods as long as your database is up to date with your Model. Since all your entities already exists, delete all duplicated code to create any entity which exists already in your Database if there is any. I found this easier when you don't have any pending updates to do to your database. Now we have our empty migration that will make no changes in our database and represents how are all the things at the begining of our migrations.  Finally, let's create our MigrationsHistory table. Optionally you can add SQL code to delete the edmdata table which is not needed anymore. public override void Up() { // Just make sure that you used 4.1 or later version         Sql("DROP TABLE EdmMetadata"); } From our Package Manager Console let's type: Update-database; If you like to see the operations made on each Update-database command you can use the flag -verbose after the Update-database. This will make two important changes.  It will execute the Up method in the initial migration which has no changes in the database. And second, and very important,  it will create the __MigrationHistory table necessary to keep track of your changes. And next time you make a change to your database it will compare the current model to the one stored in the Model Column of this table. Conclusion The important thing of this walk through is that we must create our initial migration before we start doing any changes to our model. This way we'll be adding the necessary __MigrationsHistory table to our existing database, so we can keep our database up to date with all the changes we do in our context model using migrations. Hope you have found this information useful. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Happy MySQL/Net Coding!

  Read the article

• BYOD-The Tablet Difference

  - by Samantha.Y. Ma

  By Allison Kutz, Lindsay Richardson, and Jennifer Rossbach, Sales Consultants Normal 0 false false false EN-US ZH-TW X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Less than three years ago, Apple introduced a new concept to the world: The Tablet. It’s hard to believe that in only 32 months, the iPad induced an entire new way to do business. Because of their mobility and ease-of-use, tablets have grown in popularity to keep up with the increasing “on the go” lifestyle, and their popularity isn’t expected to decrease any time soon. In fact, global tablet sales are expected to increase drastically within the next five years, from 56 million tablets to 375 million by 2016. Tablets have been utilized for every function imaginable in today’s world. With over 730,000 active applications available for the iPad, these tablets are educational devices, portable book collections, gateways into social media, entertainment for children when Mom and Dad need a minute on their own, and so much more. It’s no wonder that 74% of those who own a tablet use it daily, 60% use it several times a day, and an average of 13.9 hours per week are spent tapping away. Tablets have become a critical part of a user’s personal life; but why stop there? Businesses today are taking major strides in implementing these devices, with the hopes of benefiting from efficiency and productivity gains. Limo and taxi drivers use tablets as payment devices instead of traditional cash transactions. Retail outlets use tablets to find the exact merchandise customers are looking for. Professors use tablets to teach their classes, and business professionals demonstrate solutions and review reports from tablets. Since an overwhelming majority of tablet users have started to use their personal iPads, PlayBooks, Galaxys, etc. in the workforce, organizations have had to make a change. In many cases, companies are willing to make that change. In fact, 79% of companies are making new investments in mobility this year. Gartner reported that 90% of organizations are expected to support corporate applications on personal devices by 2014. It’s not just companies that are changing. Business professionals have become accustomed to tablets making their personal lives easier, and want that same effect in the workplace. Professionals no longer want to waste time manually entering data in their computer, or worse yet in a notebook, especially when the data has to be later transcribed to an online system. The response: the Bring Your Own Device phenomenon. According to Gartner, BOYD is “an alternative strategy allowing employees, business partners and other users to utilize a personally selected and purchased client device to execute enterprise applications and access data.” Employees whose companies embrace this trend are more efficient because they get to use devices they are already accustomed to. Tablets change the game when it comes to how sales professionals perform their jobs. Sales reps can easily store and access customer information and analytics using tablet applications, such as Oracle Fusion Tap. This method is much more enticing for sales reps than spending time logging interactions on their (what seem to be outdated) computers. Forrester & IDC reported that on average sales reps spend 65% of their time on activities other than selling, so having a tablet application to use on the go is extremely powerful. In February, Information Week released a list of “9 Powerful Business Uses for Tablet Computers,” ranging from “enhancing the customer experience” to “improving data accuracy” to “eco-friendly motivations”. Tablets compliment the lifestyle of professionals who strive to be effective and efficient, both in the office and on the road. Three Things Businesses Need to do to Embrace BYOD Make customer-facing websites tablet-friendly for consistent user experiences Develop tablet applications to continue to enhance the customer experience Embrace and use the technology that comes with tablets Almost 55 million people in the U.S. own tablets because they are convenient, easy, and powerful. These are qualities that companies strive to achieve with any piece of technology. The inherent power of the devices coupled with the growing number of business applications ensures that tablets will transform the way that companies and employees perform.

  Read the article

• Wrapping a paragraph inside a div?

  - by LOD121

  How do I make my paragraph wrap inside my div? It is currently overflowing outside of the div and I have no idea how to stop the paragraph from overflowing over the edge. I do not want a scroll bar with: overflow: scroll; and the other overflow options don't seem to help here either... I have the following code: div { width: 1200px; margin: 0 auto; } .container { overflow: hidden; } .content { width: 1000px; float: left; margin-left: 0; text-align: left; } .rightpanel { width: 190px; float: right; margin-right: 0; } <div class="container"> <div class="content"> <p>Some content flowing over more than one line</p> </div> <div class="rightpanel"> <!-- content --> </div> </div> Edit: <div class="container"> <div class="content"> <div class="leftcontent"> </div> <div class="newsfeed"> <div class="newsitem"> <p>Full age sex set feel her told. Tastes giving in passed direct me valley as supply. End great stood boy noisy often way taken short. Rent the size our more door. Years no place abode in no child my. Man pianoforte too solicitude friendship devonshire ten ask. Course sooner its silent but formal she led. Extensive he assurance extremity at breakfast. Dear sure ye sold fine sell on. Projection at up connection literature insensible motionless projecting.<br><br>Be at miss or each good play home they. It leave taste mr in it fancy. She son lose does fond bred gave lady get. Sir her company conduct expense bed any. Sister depend change off piqued one. Contented continued any happiness instantly objection yet her allowance. Use correct day new brought tedious. By come this been in. Kept easy or sons my it done.</p> </div> </div> </div> <div class="rightpanel"> </div>

  Read the article

• I added a validation to one of my models, now Rails is telling me to add validation to the partial. Help!

  - by marcamillion

  This is the error I am getting: ArgumentError in Home#index Showing /app/views/clients/_form.html.erb where line #6 raised: You need to supply at least one validation Extracted source (around line #6): 3: render :partial => "clients/form", 4: :locals => {:client => client} 5: -%> 6: <% client ||= Client.new 7: new_client = client.new_record? %> 8: <%= form_for(client, :html => { :class=>"ajax-form", :id => "client-ajax-form"}, :remote => true, :disable_with => (new_client ? "Adding..." : "Saving...")) do |f| %> 9: <div class="validation-error" style="display:none"></div> My client model looks like this: class Client < ActiveRecord::Base # the user model for the client belongs_to :user has_many :projects, :order => 'created_at DESC', :dependent => :destroy #The following produces the designers for a particular client. #Get them from the relations where the current user is a client. has_one :ownership, :dependent => :destroy has_one :designer, :through => :ownership validates :name, :presence => true, :length => {:minimum => 1, :maximum => 128} validates :number_of_clients def number_of_clients Authorization.current_user.clients.count <= Authorization.current_user.plan.num_of_clients end end This is how the app/views/client/_form.html.erb partial looks: <%# Edit a single client render :partial => "clients/form", :locals => {:client => client} -%> <% client ||= Client.new new_client = client.new_record? %> <%= form_for(client, :html => { :class=>"ajax-form", :id => "client-ajax-form"}, :remote => true, :disable_with => (new_client ? "Adding..." : "Saving...")) do |f| %> <div class="validation-error" style="display:none"></div> <div> <label for="client_name"><span class="icon name-icon"> </span></label> <input type="text" class="name" size="20" name="client[name]" id="client_name" value="<%= client.name %>" > <%= f.submit(new_client ? "Add" : "Save", :class=> "green awesome")%> </div> <% end %> <% content_for(:deferred_js) do %> // From the Client Form $('#client-ajax-form') .bind("ajax:success", function(evt, data, status, xhr){ console.log("Calling Step View"); compv.updateStepView('client', xhr); }); <% end %> How do I fix that error ?

  Read the article

• Thematic map contd.

  - by jsharma

  The previous post (creating a thematic map) described the use of an advanced style (color ranged-bucket style). The bucket style definition object has an attribute ('classification') which specifies the data classification scheme to use. It's values can be one of {'equal', 'quantile', 'logarithmic', 'custom'}. We use logarithmic in the previous example. Here we'll describe how to use a custom algorithm for classification. Specifically the Jenks Natural Breaks algorithm. We'll use the Javascript implementation in geostats.js The sample code above needs a few changes which are listed below. Include the geostats.js file after or before including oraclemapsv2.js <script src="geostats.js"></script> Modify the bucket style definition to use custom classification Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}    bucketStyleDef = {       numClasses : colorSeries[colorName].classes,       classification: 'custom', //'logarithmic',  // use a logarithmic scale       algorithm: jenksFromGeostats,       styles: theStyles,       gradient:  useGradient? 'linear' : 'off'     }; The function, which implements the custom classification scheme, is specified as the algorithm attribute value. It must accept two input parameters, an array of OM.feature and the name of the feature attribute (e.g. TOTPOP) to use in the classification, and must return an array of buckets (i.e. an array of or OM.style.Bucket  or OM.style.RangedBucket in this case). However the algorithm also needs to know the number of classes (i.e. the number of buckets to create). So we use a global to pass that info in. (Note: This bug/oversight will be fixed and the custom algorithm will be passed 3 parameters: the features array, attribute name, and number of classes). So createBucketColorStyle() has the following changes Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} var numClasses ; function createBucketColorStyle( colorName, colorSeries, rangeName, useGradient) {    var theBucketStyle;    var bucketStyleDef;    var theStyles = [];    //var numClasses ; numClasses = colorSeries[colorName].classes; ... and the function jenksFromGeostats is defined as Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} function jenksFromGeostats(featureArray, columnName) {    var items = [] ; // array of attribute values to be classified    $.each(featureArray, function(i, feature) {         items.push(parseFloat(feature.getAttributeValue(columnName)));    });    // create the geostats object    var theSeries = new geostats(items);    // call getJenks which returns an array of bounds    var theClasses = theSeries.getJenks(numClasses);    if(theClasses)    {     theClasses[theClasses.length-1]=parseFloat(theClasses[theClasses.length-1])+1;    }    else    {     alert(' empty result from getJenks');    }    var theBuckets = [], aBucket=null ;    for(var k=0; k<numClasses; k++)    {             aBucket = new OM.style.RangedBucket(             {low:parseFloat(theClasses[k]),               high:parseFloat(theClasses[k+1])             });             theBuckets.push(aBucket);     }     return theBuckets; } A screenshot of the resulting map with 5 classes is shown below. It is also possible to simply create the buckets and supply them when defining the Bucket style instead of specifying the function (algorithm). In that case the bucket style definition object would be    bucketStyleDef = {      numClasses : colorSeries[colorName].classes,      classification: 'custom',        buckets: theBuckets, //since we are supplying all the buckets      styles: theStyles,      gradient:  useGradient? 'linear' : 'off'    };

  Read the article

• ADF Business Components

  - by Arda Eralp

  ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions   ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive.   ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database   Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components   Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management   Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service   Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application   ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database   View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application  

  Read the article

• Thread locking issue with FileHelpers between calling engine.ReadNext() method and readign engine.Li

  - by Rad

  I use producer/consumer pattern with FileHelpers library to import data from one file (which can be huge) using multiple threads. Each thread is supposed to import a chunk of that file and I would like to use LineNumber property of the FileHelperAsyncEngine instance that is reading the file as primary key for imported rows. FileHelperAsyncEngine internally has an IEnumerator IEnumerable.GetEnumerator(); which is iterated over using engine.ReadNext() method. That internally sets LineNumber property (which seems is not thread safe). Consumers will have Producers assiciated with them that will supply DataTables to Consumers which will consume them via SqlBulkLoad class which will use IDataReader implementation which will iterate over a collection of DataTables which are internal to a Consumer instance. Each instance of will have one SqlBulkCopy instance associate with it. I have thread locking issue. Below is how I create multiple Producer threads. I start each thread afterwords. Produce method on a producer instance will be called determining which chunk of input file will be processed. It seems that engine.LineNumber is not thread safe and I doesn't import a proper LineNumber in the database. It seems that by the time engine.LineNumber is read some other thread called engine.ReadNext() and changed engine.LineNumber property. I don't want to lock the loop that is supposed to process a chunk of input file because I loose parallelism. How to reorganize the code to solve this threading issue? Thanks Rad for (int i = 0; i < numberOfProducerThreads; i++) DataConsumer consumer = dataConsumers[i]; //create a new producer DataProducer producer = new DataProducer(); //consumer has already being created consumer.Subscribe(producer); FileHelperAsyncEngine orderDetailEngine = new FileHelperAsyncEngine(recordType); orderDetailEngine.Options.RecordCondition.Condition = RecordCondition.ExcludeIfBegins; orderDetailEngine.Options.RecordCondition.Selector = STR_ORDR; int skipLines = i * numberOfBufferTablesToProcess * DataBuffer.MaxBufferRowCount; Thread newThread = new Thread(() => { producer.Produce(consumer, inputFilePath, lineNumberFieldName, dict, orderDetailEngine, skipLines, numberOfBufferTablesToProcess); consumer.SetEndOfData(producer); }); producerThreads.Add(newThread); thread.Start();} public void Produce(DataConsumer consumer, string inputFilePath, string lineNumberFieldName, Dictionary<string, object> dict, FileHelperAsyncEngine engine, int skipLines, int numberOfBufferTablesToProcess) { lock (this) { engine.Options.IgnoreFirstLines = skipLines; engine.BeginReadFile(inputFilePath); } int rowCount = 1; DataTable buffer = consumer.BufferDataTable; while (engine.ReadNext() != null) { lock (this) { dict[lineNumberFieldName] = engine.LineNumber; buffer.Rows.Add(ObjectFieldsDataRowMapper.MapObjectFieldsToDataRow(engine.LastRecord, dict, buffer)); if (rowCount % DataBuffer.MaxBufferRowCount == 0) { consumer.AddBufferDataTable(buffer); buffer = consumer.BufferDataTable; } if (rowCount % (numberOfBufferTablesToProcess * DataBuffer.MaxBufferRowCount) == 0) { break; } rowCount++; } } if (buffer.Rows.Count > 0) { consumer.AddBufferDataTable(buffer); } engine.Close(); }

  Read the article

• How to fix Ubuntu 12.04.3 boot to black screen full of errors in white text, after upgrading on dell inspiron 1501

  - by Ibuntu

  I am running a Dell Inspiron 1501 I use Linux only. No Microsoft or Apple operating systems (or really anything closed-source). I've only been using Linux for a little over a year but I'm starting to gain a comfortable level of familiarity with the system and terminology. I've been having some issues with Quantel Quetzal and Raring Ringtail, especially with older hardware, so I opted to install Ubuntu 12.04.3 Precise Pangolin on the Inspiron 1501. I checked my MD5 sum after downloading my ISO and all was good. I have in fact used this iso/dvd to install Precise Pangolin successfully on a few other systems (some of which are even older than this laptop). Install goes fine. The wireless card doesn't work out of the box but this is a known issue which is fairly easy to fix. So, first thing I did was open up a terminal and run sudo apt-get update && sudo apt-get upgrade which, part way through, crashed (I assume lightdm and possibly X) and took me to a black screen filled with white lines of text that were either errors or just the ouputs of commands. The reason I say that is because I was unable to gleam any useful information from the output on the screen. I did take a picture however and will post a link. After that, every time I boot the system it goes right to that black screen posting all the error messages or output in white text. I never get a purple Ubuntu splash, so from what I can tell after reading this wiki article: https://wiki.ubuntu.com/X/Troubleshooting/BlankScreen That means that after the kernel is selected, it is unable to correctly implement the settings it needs. If the purple splash never shows, the frame buffer was never set correctly right? This leads me to believe that it could be a kernel issue? The wiki suggested to try and pinpoint the issue by rolling back kernels until I find one that works. Is this my best option? I think I'm going to give it a try anyways and will let everyone know if I am able to solve the issue this way. I have since done a few reinstalls and some trouble-shooting including a couple hours scouring the net for anyone with any kind of similar issue. Most of the issues I could find involved getting a black screen after login and none of them said anything about any information output on this black screen. My reinstalls have taught me that there is no issue updating, but as soon as I run sudo apt-get upgrade my system goes to the black screen and every time I boot it up it does the same thing. The only way to fix is by reinstall. I never get any ability to log in. After a hard power off to the laptop (because I cannot use ctrl+alt+del to reboot) when it boots again it goes to the grub boot menu and I can select between regular boot, recovery mode and the two memtest options. I never tried the memtest options but the other two both lead to the same black screen. Some people having a black/blank screen issue claim to have fixed it by using 12.10 or 13.04 but I believe they were having a different issue where they got a black/blank screen after logging in. I think I will still give these images a try, but mostly figured I would just wait another day or two for 13.10. Other things I figured I would try from the following three articles: After logging in, there's a black screen and my cursor, nothing else! in Ubuntu 12.10 Black Screen on Login After Upgrading to 12.04 I can't get to the login screen include opening a terminal using ctrl+alt+f1 and trying a variety of reseting unity, x settings, lightdm (or switching to gdm); but I doubt this will work or that I will even be able to access a terminal. I'm pretty sure the whole system is stuck after it loads the last line on the black screen. I will try these things and post more information when I have. Hopefully someone has an idea in the meantime and I will keep checking back trying to find a solution. Thank you. Here are 3 different pictures of the error message. I had to take with my phone: http://ubuntuone.com/album/0TBBkxmVajJIQQtoN9mVdN

  Read the article

• Increasing efficiency of N-Body gravity simulation

  - by Postman

  I'm making a space exploration type game, it will have many planets and other objects that will all have realistic gravity. I currently have a system in place that works, but if the number of planets goes above 70, the FPS decreases an practically exponential rates. I'm making it in C# and XNA. My guess is that I should be able to do gravity calculations between 100 objects without this kind of strain, so clearly my method is not as efficient as it should be. I have two files, Gravity.cs and EntityEngine.cs. Gravity manages JUST the gravity calculations, EntityEngine creates an instance of Gravity and runs it, along with other entity related methods. EntityEngine.cs public void Update() { foreach (KeyValuePair<string, Entity> e in Entities) { e.Value.Update(); } gravity.Update(); } (Only relevant piece of code from EntityEngine, self explanatory. When an instance of Gravity is made in entityEngine, it passes itself (this) into it, so that gravity can have access to entityEngine.Entities (a dictionary of all planet objects)) Gravity.cs namespace ExplorationEngine { public class Gravity { private EntityEngine entityEngine; private Vector2 Force; private Vector2 VecForce; private float distance; private float mult; public Gravity(EntityEngine e) { entityEngine = e; } public void Update() { //First loop foreach (KeyValuePair<string, Entity> e in entityEngine.Entities) { //Reset the force vector Force = new Vector2(); //Second loop foreach (KeyValuePair<string, Entity> e2 in entityEngine.Entities) { //Make sure the second value is not the current value from the first loop if (e2.Value != e.Value ) { //Find the distance between the two objects. Because Fg = G * ((M1 * M2) / r^2), using Vector2.Distance() and then squaring it //is pointless and inefficient because distance uses a sqrt, squaring the result simple cancels that sqrt. distance = Vector2.DistanceSquared(e2.Value.Position, e.Value.Position); //This makes sure that two planets do not attract eachother if they are touching, completely unnecessary when I add collision, //For now it just makes it so that the planets are not glitchy, performance is not significantly improved by removing this IF if (Math.Sqrt(distance) > (e.Value.Texture.Width / 2 + e2.Value.Texture.Width / 2)) { //Calculate the magnitude of Fg (I'm using my own gravitational constant (G) for the sake of time (I know it's 1 at the moment, but I've been changing it) mult = 1.0f * ((e.Value.Mass * e2.Value.Mass) / distance); //Calculate the direction of the force, simply subtracting the positions and normalizing works, this fixes diagonal vectors //from having a larger value, and basically makes VecForce a direction. VecForce = e2.Value.Position - e.Value.Position; VecForce.Normalize(); //Add the vector for each planet in the second loop to a force var. Force = Vector2.Add(Force, VecForce * mult); //I have tried Force += VecForce * mult, and have not noticed much of an increase in speed. } } } //Add that force to the first loop's planet's position (later on I'll instead add to acceleration, to account for inertia) e.Value.Position += Force; } } } } I have used various tips (about gravity optimizing, not threading) from THIS question (that I made yesterday). I've made this gravity method (Gravity.Update) as efficient as I know how to make it. This O(N^2) algorithm still seems to be eating up all of my CPU power though. Here is a LINK (google drive, go to File download, keep .Exe with the content folder, you will need XNA Framework 4.0 Redist. if you don't already have it) to the current version of my game. Left click makes a planet, right click removes the last planet. Mouse moves the camera, scroll wheel zooms in and out. Watch the FPS and Planet Count to see what I mean about performance issues past 70 planets. (ALL 70 planets must be moving, I've had 100 stationary planets and only 5 or so moving ones while still having 300 fps, the issue arises when 70+ are moving around) After 70 planets are made, performance tanks exponentially. With < 70 planets, I get 330 fps (I have it capped at 300). At 90 planets, the FPS is about 2, more than that and it sticks around at 0 FPS. Strangely enough, when all planets are stationary, the FPS climbs back up to around 300, but as soon as something moves, it goes right back down to what it was, I have no systems in place to make this happen, it just does. I considered multithreading, but that previous question I asked taught me a thing or two, and I see now that that's not a viable option. I've also thought maybe I could do the calculations on my GPU instead, though I don't think it should be necessary. I also do not know how to do this, it is not a simple concept and I want to avoid it unless someone knows a really noob friendly simple way to do it that will work for an n-body gravity calculation. (I have an NVidia gtx 660) Lastly I've considered using a quadtree type system. (Barnes Hut simulation) I've been told (in the previous question) that this is a good method that is commonly used, and it seems logical and straightforward, however the implementation is way over my head and I haven't found a good tutorial for C# yet that explains it in a way I can understand, or uses code I can eventually figure out. So my question is this: How can I make my gravity method more efficient, allowing me to use more than 100 objects (I can render 1000 planets with constant 300+ FPS without gravity calculations), and if I can't do much to improve performance (including some kind of quadtree system), could I use my GPU to do the calculations?

  Read the article

• Applying Unity in dynamic menu

  - by Rajarshi

  I was going through Unity 2.0 to check if it has an effective use in our new application. My application is a Windows Forms application and uses a traditional bar menu (at the top), currently. My UIs (Windows Forms) more or less support Dependency Injection pattern since they all work with a class (Presentation Model Class) supplied to them via the constructor. The form then binds to the properties of the supplied P Model class and calls methods on the P Model class to perform its duties. Pretty simple and straightforward. How P Model reacts to the UI actions and responds to them by co-ordinating with the Domain Class (Business Logic/Model) is irrelevant here and thus not mentioned. The object creation sequence to show up one UI from menu then goes like this - Create Business Model instance Create Presentation Model instance with Business Model instance passed to P Model constructor. Create UI instance with Presentation Model instance passed to UI constructor. My present solution: To show an UI in the method above from my menu I would have to refer all assemblies (Business, PModel, UI) from my Menu class. Considering I have split the modules into a number of physical assemblies, that would be a dificult task to add references to about 60 different assemblies. Also the approach is not very scalable since I would certainly need to release more modules and with this approach I would have to change the source code every time I release a new module. So primarily to avoid the reference of so many assemblies from my Menu class (assembly) I did as below - Stored all the dependency described above in a database table (SQL Server), e.g. ModuleShortCode | BModelAssembly | BModelFullTypeName | PModelAssembly | PModelFullTypeName | UIAssembly | UIFullTypeName Now used a static class named "Launcher" with a method "Launch" as below - Launcher.Launch("Discount") Launcher.Launch("Customers") The Launcher internally uses data from the dependency table and uses Activator.CreateInstance() to create each of the objects and uses the instance as constructor parameter to the next object being created, till the UI is built. The UI is then shown as a modal dialog. The code inside Launcher is somewhat like - Form frm = ResolveForm("Discount"); frm.ShowDialog(); The ResolveForm does the trick of building the chain of objects. Can Unity help me here? Now when I did that I did not have enough information on Unity and now that I have studied Unity I think I have been doing more or less the same thing. So I tried to replace my code with Unity. However, as soon as I started I hit a block. If I try to resolve UI forms in my Menu as Form customers = myUnityContainer.Resolve(); or Form customers = myUnityContainer.Resolve(typeof(Customers)); Then either way, I need to refer to my UI assembly from my Menu assembly since the target Type "Customers" need to be known for Unity to resolve it. So I am back to same place since I would have to refer all UI assemblies from the Menu assembly. I understand that with Unity I would have to refer fewer assemblies (only UI assemblies) but those references are needed which defeats my objectives below - Create the chain of objects dynamically without any assembly reference from Menu assembly. This is to avoid Menu source code changing every time I release a new module. My Menu also is built dynamically from a table. Be able to supply new modules just by supplying the new assemblies and inserting the new Dependency row in the table by a database patch. At this stage, I have a feeling that I have to do it the way I was doing, i.e. Activator.CreateInstance() to fulfil all my objectives. I need to verify whether the community thinks the same way as me or have a better suggestion to solve the problem. The post is really long and I sincerely thank you if you come til this point. Waiting for your valuable suggestions. Rajarshi

  Read the article

• IE9, LightSwitch Beta 2 and Zune HD: A Study in Risk Management?

  - by andrewbrust

  Photo by parl, 'Risk.’ Under Creative Commons Attribution-NonCommercial-NoDerivs License This has been a busy week for Microsoft, and for me as well.  On Monday, Microsoft launched Internet Explorer 9 at South by Southwest (SXSW) in Austin, TX.  That evening I flew from New York to Seattle.  On Tuesday morning, Microsoft launched Visual Studio LightSwitch, Beta 2 with a Go-Live license, in Redmond, and I had the privilege of speaking at the keynote presentation where the announcement was made.  Readers of this blog know I‘m a fan of LightSwitch, so I was happy to tell the app dev tools partners in the audience that I thought the LightSwitch extensions ecosystem represented a big opportunity – comparable to the opportunity when Visual Basic 1.0 was entering its final beta roughly 20 years ago.  On Tuesday evening, I flew back to New York (and wrote most of this post in-flight). Two busy, productive days.  But there was a caveat that impacts the accomplishments, because Monday was also the day reports surfaced from credible news agencies that Microsoft was discontinuing its dedicated Zune hardware efforts.  While the Zune brand, technology and service will continue to be a component of Windows Phone and a piece of the Xbox puzzle as well, speculation is that Microsoft will no longer be going toe-to-toe with iPod touch in the portable music player market. If we take all three of these developments together (even if one of them is based on speculation), two interesting conclusions can reasonably be drawn, one good and one less so. Microsoft is doubling down on technologies it finds strategic and de-emphasizing those that it does not.  HTML 5 and the Web are strategic, so here comes IE9, and it’s a very good browser.  Try it and see.  Silverlight is strategic too, as is SQL Server, Windows Azure and SQL Azure, so here comes Visual Studio LightSwitch Beta 2 and a license to deploy its apps to production.  Downloads of that product have exceeded Microsoft’s projections by more than 50%, and the company is even citing analyst firms’ figures covering the number of power-user developers that might use it. (I happen to think the product will be used by full-fledged developers as well, but that’s a separate discussion.) Windows Phone is strategic too…I wasn’t 100% positive of that before, but the Nokia agreement has made me confident.  Xbox as an entertainment appliance is also strategic.  Standalone music players are not strategic – and even if they were, selling them has been a losing battle for Microsoft.  So if Microsoft has consolidated the Zune content story and the ZunePass subscription into Xbox and Windows Phone, it would make sense, and would be a smart allocation of resources.  Essentially, it would be for the greater good. But it’s not all good.  In this scenario, Zune player customers would lose out.  Unless they wanted to switch to Windows Phone, and then use their phone’s battery for the portable media needs, they’re going to need a new platform.  They’re going to feel abandoned.  Even if Zune lives, there have been other such cul de sacs for customers.  Remember SPOT watches?  Live Spaces?  The original Live Mesh?  Microsoft discontinued each of these products.  The company is to be commended for cutting its losses, as admitting a loss isn’t easy.  But Redmond won’t be well-regarded by the victims of those decisions.  Instead, it gets black marks. What’s the answer?  I think it’s a bit like the 1980’s New York City “don’t block the box” gridlock rules: don’t enter an intersection unless you see a clear path through it.  If the light turns red and you’re blocking the perpendicular traffic, that’s your fault in judgment.  You get fined and get points on your license and you don’t get to shrug it off as beyond your control.  Accountability is key.  The same goes for Microsoft.  If it decides to enter a market, it should see a reasonable path through success in that market. Switching analogies, Microsoft shouldn’t make investments haphazardly, and it certainly shouldn’t ask investors to buy into a high-risk fund that is sold as safe and which offers only moderate returns.  People won’t continue to invest with a fund manager with a track record of over-zealous, imprudent, sub-prime investments.  The same is true on the product side for Microsoft, and not just with music players and geeky wrist watches.  It’s true of Web browsers, and line-of-business app dev tools, and smartphones, and cloud platforms and operating systems too.  When Microsoft is casual about its own risk, it raises risk for its customers, and weakens its reputation, market share and credibility.  That doesn’t mean all risk is bad, but it does mean no product team’s risk should be taken lightly. For mutual fund companies, it’s the CEO’s job to give his fund managers autonomy, but to make sure they’re conforming to a standard of rational risk management.  Because all those funds carry the same brand, and many of them serve the same investors. The same goes for Microsoft, its product portfolio, its executive ranks and its product managers.

  Read the article

• State of the (Commerce) Union: What the healthcare.gov hiccups teach us about the commerce customer experience

  - by Katrina Gosek

  Guest Post by Brenna Johnson, Oracle Commerce Product A lot has been said about the healthcare.gov debacle in the last week. Regardless of your feelings about the Affordable Care Act, there’s a hidden issue in this story that most of the American people don’t understand: delivering a great commerce customer experience (CX) is hard. It shouldn’t be, but it is. The reality of the government’s issues getting the healthcare site up and running smooth is something we in the online commerce community know too well.  If there’s one thing the botched launch of the site has taught us, it’s that regardless of the size of your budget or the power of an executive with a high-profile project, some of the biggest initiatives with the most attention (and the most at stake) don’t go as planned. It may even give you a moment of solace – we have the same issues! But why?  Organizations engage too many separate vendors with different technologies, running sections or pieces of a site to get live. When things go wrong, it takes time to identify the problem – and who or what is at the center of it. Unfortunately, this is a brittle way of setting up a site, making it susceptible to breaks, bugs, and scaling issues. But, it’s the reality of running a site with legacy technology constraints in today’s demanding, customer-centric market. This approach also means there’s also a lot of cooks in lots of different kitchens. You’ve got development and IT, the business and the marketing team, an external Systems Integrator to bring it all together, a digital agency or consultant, QA, product experts, 3rd party suppliers, and the list goes on. To complicate things, different business units are held responsible for different pieces of the site and managing different technologies. And again – due to legacy organizational structure and processes, this is all accepted as the normal State of the Union. Digital commerce has been commonplace for 15 years. Yet, getting a site live, maintained and performing requires orchestrating a cast of thousands (or at least, dozens), big dollars, and some finger-crossing. But it shouldn’t. The great thing about the advent of mobile commerce and the continued maturity of online commerce is that it’s forced organizations to think from the outside, in. Consumers – whether they’re shopping for shoes or a new healthcare plan – don’t care about what technology issues or processes you have behind the scenes. They just want it to work.  They want their experience to be easy, fast, and tailored to them and their needs – whatever they are. This doesn’t sound like a tall order to the American consumer – especially since they interact with sites that do work smoothly.  But the reality is that it takes scores of people, teams, check-ins, late nights, testing, and some good luck to get sites to run, and even more so at Black Friday (or October 1st) traffic levels.  The last thing on a customer’s mind is making excuses for why they can’t buy a product – just get it to work. So what is the government doing? My guess is working day and night to get the site performing  - and having to throw big money at the problem. In the meantime they’re sending frustrated online users to the call center, or even a location where a trained “navigator” can help them in-person to complete their selection. Sounds a lot like multichannel commerce (where broken communication between siloed touchpoints will only frustrate the consumer more). One thing we’ve learned is that consumers spend their time and money with brands they know and trust. When sites are easy to use and adapt to their needs, they tend to spend more, come back, and even become long-time loyalists. Achieving this may require moving internal mountains, but there’s too much at stake to ignore the sea change in how organizations are thinking about their customer. If the thought of re-thinking your internal teams, technologies, and processes sounds like a headache, think about the pain associated with losing valuable customers – and dollars. Regardless if you’re in B2B or B2C, it’s guaranteed that your competitors are making CX a priority. Those early to the game who have made CX a priority have already begun to outpace their competition. So as you’re planning for 2014, look to the news this week. Make sure the customer experience is a focus at your organization. Expectations are at record highs. Map your customer’s journey, and think from the outside, in. How easy is it for your customers to do business with you? If they interact with many touchpoints across your organization, are the call center, website, mobile environment, or brick and mortar location in sync? Do you have the technology in place to achieve this? It’s time to give the people what they want!

  Read the article

• hosting simple python scripts in a container to handle concurrency, configuration, caching, etc.

  - by Justin Grant

  My first real-world Python project is to write a simple framework (or re-use/adapt an existing one) which can wrap small python scripts (which are used to gather custom data for a monitoring tool) with a "container" to handle boilerplate tasks like: fetching a script's configuration from a file (and keeping that info up to date if the file changes and handle decryption of sensitive config data) running multiple instances of the same script in different threads instead of spinning up a new process for each one expose an API for caching expensive data and storing persistent state from one script invocation to the next Today, script authors must handle the issues above, which usually means that most script authors don't handle them correctly, causing bugs and performance problems. In addition to avoiding bugs, we want a solution which lowers the bar to create and maintain scripts, especially given that many script authors may not be trained programmers. Below are examples of the API I've been thinking of, and which I'm looking to get your feedback about. A scripter would need to build a single method which takes (as input) the configuration that the script needs to do its job, and either returns a python object or calls a method to stream back data in chunks. Optionally, a scripter could supply methods to handle startup and/or shutdown tasks. HTTP-fetching script example (in pseudocode, omitting the actual data-fetching details to focus on the container's API): def run (config, context, cache) : results = http_library_call (config.url, config.http_method, config.username, config.password, ...) return { html : results.html, status_code : results.status, headers : results.response_headers } def init(config, context, cache) : config.max_threads = 20 # up to 20 URLs at one time (per process) config.max_processes = 3 # launch up to 3 concurrent processes config.keepalive = 1200 # keep process alive for 10 mins without another call config.process_recycle.requests = 1000 # restart the process every 1000 requests (to avoid leaks) config.kill_timeout = 600 # kill the process if any call lasts longer than 10 minutes Database-data fetching script example might look like this (in pseudocode): def run (config, context, cache) : expensive = context.cache["something_expensive"] for record in db_library_call (expensive, context.checkpoint, config.connection_string) : context.log (record, "logDate") # log all properties, optionally specify name of timestamp property last_date = record["logDate"] context.checkpoint = last_date # persistent checkpoint, used next time through def init(config, context, cache) : cache["something_expensive"] = get_expensive_thing() def shutdown(config, context, cache) : expensive = cache["something_expensive"] expensive.release_me() Is this API appropriately "pythonic", or are there things I should do to make this more natural to the Python scripter? (I'm more familiar with building C++/C#/Java APIs so I suspect I'm missing useful Python idioms.) Specific questions: is it natural to pass a "config" object into a method and ask the callee to set various configuration options? Or is there another preferred way to do this? when a callee needs to stream data back to its caller, is a method like context.log() (see above) appropriate, or should I be using yield instead? (yeild seems natural, but I worry it'd be over the head of most scripters) My approach requires scripts to define functions with predefined names (e.g. "run", "init", "shutdown"). Is this a good way to do it? If not, what other mechanism would be more natural? I'm passing the same config, context, cache parameters into every method. Would it be better to use a single "context" parameter instead? Would it be better to use global variables instead? Finally, are there existing libraries you'd recommend to make this kind of simple "script-running container" easier to write?

  Read the article

• YouTube SEO: Video Optimization

  - by Mike Stiles

  SEO optimization is still regarded as one of the primary tools in the digital marketing kit. However and wherever a potential customer is conducting a search, brands want their content to surface in the top results. Makes sense. But without a regular flow of good, relevant content, your SEO opportunities run shallow. We know from several studies video is one of the most engaging forms of content, so why not make sure that in addition to being cool, your videos are helping you win the SEO game? Keywords:-Decide what search phrases make the most sense for your video. Don’t dare use phrases that have nothing to do with the content. You’ll make people mad.-Research those keywords to see how competitive they are. Adjust them so there are still lots of people searching for it, but there are not as many links showing up for it.-Search your potential keywords and phrases to see what comes up. It’s amazing how many people forget to do that. Video Title: -Try to start and/or end with your keyword.-When you search on YouTube, visual action words tend to come up as suggested searches. So try to use action words. Video Description: -Lead with a link to your site (include http://). -Don’t stuff this with your keyword. It leads to bad writing and it won’t work anyway. This is where you convince people to watch, so write for humans. Use some showmanship. -At the end, do a call to action (subscribe, see the whole playlist, visit our social channels, etc.) Video Tags:-Don’t over-tag. 5-10 tags per video is plenty. -If you’re compelled to have more than 10, that means you should probably make more videos specifically targeting all those keywords. Find Linking Pals:-45% of videos are discovered on video sites. But 44% are found through links on blogs and sites.-Write a blog about your video’s content, then link to the video in it. -A good site for finding places to guest blog is myblogguest.com-Once you find good linking partners, they’ll link to your future videos (as long as they’re good and you’re returning the favor). Tap the Power of Similar Videos:-Use Video Reply to associate your video with other topic-related videos. That’s when you make a video responding to or referencing a video made by someone else. Content:-Again, build up a portfolio of videos, not just one that goes after 30 keywords.-Create shorter, sequential videos that pull them deeper into the content and closer to a desired final action.-Organize your video topics separately using Playlists. Playlists show up as a whole in search results like individual videos, so optimize playlists the same as you would for a video. Meta Data:-Too much importance is placed on it. It accounts for only 15% of search success.-YouTube reads Captions or Transcripts to determine what a video is about. If you’re not using them, you’re missing out.-You get the SEO benefit of captions and transcripts whether the viewers has them toggled on or not. Promotion:-This accounts for 25% of search success.-Promote the daylights out of your videos using your social channels and digital assets. Don’t assume it’s going to magically get discovered. -You can pay to promote your video. This could surface it on the YouTube home page, YouTube search results, YouTube related videos, and across the Google content network. Community:-Accounts for 10% of search success.-Make sure your YouTube home page is a fun place to spend time. Carefully pick your featured video, and make sure your Playlists are featured. -Participate in discussions so users will see you’re present. The volume of ratings/comments is as important as the number of views when it comes to where you surface on search. Video Sitemaps:-As with a web site, a video sitemap helps Google quickly index your video.-Google wants to know title, description, play page URL, the URL of the thumbnail image you want, and raw video file location.-Sitemaps are xml files you host or dynamically generate on your site. Once you’ve made your sitemap, sign in and submit it using Google webmaster tools. Just as with the broadcast and cable TV channels, putting a video out there is only step one. You also have to make sure everybody knows it’s there so the largest audience possible can see it. Here’s hoping you get great ratings. @mikestiles

  Read the article

• 10000's+ UI elements, bind or draw?

  - by jpiccolo

  I am drawing a header for a timeline control. It looks like this: I go to 0.01 millisecond per line, so for a 10 minute timeline I am looking at drawing 60000 lines + 6000 labels. This takes a while, ~10 seconds. I would like to offload this from the UI thread. My code is currently: private void drawHeader() { Header.Children.Clear(); switch (viewLevel) { case ViewLevel.MilliSeconds100: double hWidth = Header.Width; this.drawHeaderLines(new TimeSpan(0, 0, 0, 0, 10), 100, 5, hWidth); //Was looking into background worker to off load UI //backgroundWorker = new BackgroundWorker(); //backgroundWorker.DoWork += delegate(object sender, DoWorkEventArgs args) // { // this.drawHeaderLines(new TimeSpan(0, 0, 0, 0, 10), 100, 5, hWidth); // }; //backgroundWorker.RunWorkerAsync(); break; } } private void drawHeaderLines(TimeSpan timeStep, int majorEveryXLine, int distanceBetweenLines, double headerWidth) { var currentTime = new TimeSpan(0, 0, 0, 0, 0); const int everyXLine100 = 10; double currentX = 0; var currentLine = 0; while (currentX < headerWidth) { var l = new Line { ToolTip = currentTime.ToString(@"hh\:mm\:ss\.fff"), StrokeThickness = 1, X1 = 0, X2 = 0, Y1 = 30, Y2 = 25 }; if (((currentLine % majorEveryXLine) == 0) && currentLine != 0) { l.StrokeThickness = 2; l.Y2 = 15; var textBlock = new TextBlock { Text = l.ToolTip.ToString(), FontSize = 8, FontFamily = new FontFamily("Tahoma"), Foreground = new SolidColorBrush(Color.FromRgb(255, 255, 255)) }; Canvas.SetLeft(textBlock, (currentX - 22)); Canvas.SetTop(textBlock, 0); Header.Children.Add(textBlock); } if ((((currentLine % everyXLine100) == 0) && currentLine != 0) && (currentLine % majorEveryXLine) != 0) { l.Y2 = 20; var textBlock = new TextBlock { Text = string.Format(".{0}", TimeSpan.Parse(l.ToolTip.ToString()).Milliseconds), FontSize = 8, FontFamily = new FontFamily("Tahoma"), Foreground = new SolidColorBrush(Color.FromRgb(192, 192, 192)) }; Canvas.SetLeft(textBlock, (currentX - 8)); Canvas.SetTop(textBlock, 8); Header.Children.Add(textBlock); } l.Stroke = new SolidColorBrush(Color.FromRgb(255, 255, 255)); Header.Children.Add(l); Canvas.SetLeft(l, currentX); currentX += distanceBetweenLines; currentLine++; currentTime += timeStep; } } I had looked into BackgroundWorker, except you can't create UI elements on a non-UI thread. Is it possible at all to do drawHeaderLines in a non-UI thread? Could I use data binding for drawing the lines? Would this help with UI responsiveness? I would imagine I can use databinding, but the Styling is probably beyond my current WPF ability (coming from winforms and trying to learn what all these style objects are and binding them). Would anyone be able to supply a starting point for tempting this out? Or Google a tutorial that would get me started?

  Read the article

< Previous Page | 247 248 249 250 251 252 253 254 255 256 257 258  | Next Page >