Search Results

Search found 28841 results on 1154 pages for 'simple as could be'.

Page 252/1154 | < Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >

• BizTalk 2009 - BizTalk Benchmark Wizard: Running a Test

  - by StuartBrierley

  The BizTalk Benchmark Wizard is a ultility that can be used to gain some validation of a BizTalk installation, giving a level of guidance on whether it is performing as might be expected.  It should be used after BizTalk Server has been installed and before any solutions are deployed to the environment.  This will ensure that you are getting consistent and clean results from the BizTalk Benchmark Wizard. The BizTalk Benchmark Wizard applies load to the BizTalk Server environment under a choice of specific scenarios. During these scenarios performance counter information is collected and assessed against statistics that are appropriate to the BizTalk Server environment. For details on installing the Benchmark Wizard see my previous post. The BizTalk Benchmarking Wizard provides two simple test scenarios, one for messaging and one for Orchestrations, which can be used to test your BizTalk implementation. Messaging Loadgen generates a new XML message and sends it over NetTCP A WCF-NetTCP Receive Location receives a the xml document from Loadgen. The PassThruReceive pipeline performs no processing and the message is published by the EPM to the MessageBox. The WCF One-Way Send Port, which is the only subscriber to the message, retrieves the message from the MessageBox The PassThruTransmit pipeline provides no additional processing The message is delivered to the back end WCF service by the WCF NetTCP adapter Orchestrations Loadgen generates a new XML message and sends it over NetTCP A WCF-NetTCP Receive Location receives a the xml document from Loadgen. The XMLReceive pipeline performs no processing and the message is published by the EPM to the MessageBox. The message is delivered to a simple Orchestration which consists of a receive location and a send port The WCF One-Way Send Port, which is the only subscriber to the Orchestration message, retrieves the message from the MessageBox The PassThruTransmit pipeline provides no additional processing The message is delivered to the back end WCF service by the WCF NetTCP adapter Below is a quick outline of how to run the BizTalk Benchmark Wizard on a single server, although it should be noted that this is not ideal as this server is then both generating and processing the load.  In order to separate this load out you should run the "Indigo" service on a seperate server. To start the BizTalk Benchmark Wizard click Start > All Programs > BizTalk Benchmark Wizard > BizTalk Benchmark Wizard. On this screen click next, you will then get the following pop up window. Check the server and database names and check the "check prerequsites" check-box before pressing ok.  The wizard will then check that the appropriate test scenarios are installed. You should then choose the test scenario that wish to run (messaging or orchestration) and the architecture that most closely matches your environment. You will then be asked to confirm the host server for each of the host instances. Next you will be presented with the prepare screen.  You will need to start the indigo service before pressing the Test Indigo Service Button. If you are running the indigo service on a separate server you can enter the server name here.  To start the indigo service click Start > All Programs > BizTalk Benchmark Wizard > Start Indigo Service.   While the test is running you will be presented with two speed dial type displays - one for the received messages per second and one for the processed messages per second. The green dial shows the current rate and the red dial shows the overall average rate.  Optionally you can view the CPU usage of the various servers involved in processing the tests. For my development environment I expected low results and this is what I got.  Although looking at the online high scores table and comparing to the quad core system listed, the results are perhaps not really that bad. At some time I may look at what improvements I can make to this score, but if you are interested in that now take a look at Benchmark your BizTalk Server (Part 3).

  Read the article

• SQL SERVER – master Database Log File Grew Too Big

  - by pinaldave

  Couple of the days ago, I received following email and I find this email very interesting and I feel like sharing with all of you. Note: Please read the whole email before providing your suggestions. “Hi Pinal, If you can share these details on your blog, it will help many. We understand the value of the master database and we take its regular back up (everyday midnight). Yesterday we noticed that our master database log file has grown very large. This is very first time that we have encountered such an issue. The master database is in simple recovery mode; so we assumed that it will never grow big; however, we now have a big log file. We ran the following command USE [master] GO DBCC SHRINKFILE (N'mastlog' , 0, TRUNCATEONLY) GO We know this command will break the chains of LSN but as per our understanding; it should not matter as we are in simple recovery model.     After running this, the log file becomes very small. Just to be cautious, we took full backup of the master database right away. We totally understand that this is not the normal practice; so if you are going to tell us the same, we are aware of it. However, here is the question for you? What operation in master database would have caused our log file to grow too large? Thanks, [name and company name removed as per request]“ Here was my response to them: “Hi [name removed], It is great that you are aware of all the right steps and method. Taking full backup when you are not sure is always a good practice. Regarding your question what could have caused your master database log to grow larger, let me try to guess what could have happened. Do you have any user table in the master database? If yes, this is not recommended and also NOT a good practice. If have user tables in master database and you are doing any long operation (may be lots of insert, update, delete or rebuilding them), then it can cause this situation. You have made me curious about your scenario; do revert back. Kind Regards, Pinal” Within few minutes I received reply: “That was it Pinal. We had one of the maintenance task log tables created in the master table, which had many long transactions during the night. We moved it to newly created database named ‘maintenance’, and we will keep you updated.” I was very glad to receive the email. I do not suggest that any user table should be created in the master database. It should be left alone from user objects. Now here is the question for you – can you think of any other reason for master log file growth? Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Scripts, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• glsl shader to allow color change of skydome ogre3d

  - by Tim

  I'm still very new to all this but learning a lot. I'm putting together an application using Ogre3d as the rendering engine. So far I've got it running, with a simple scene, a day/night cycle system which is working okay. I'm now moving on to looking at changing the color of the skydome material based on the time of day. What I've done so far is to create a struct to hold the ColourValues for the different aspects of the scene. struct todColors { Ogre::ColourValue sky; Ogre::ColourValue ambient; Ogre::ColourValue sun; }; I created an array to store all the colours todColors sceneColours [4]; I populated the array with the colours I want to use for the various times of the day. For instance DayTime (when the sun is high in the sky) sceneColours[2].sky = Ogre::ColourValue(135/255, 206/255, 235/255, 255); sceneColours[2].ambient = Ogre::ColourValue(135/255, 206/255, 235/255, 255); sceneColours[2].sun = Ogre::ColourValue(135/255, 206/255, 235/255, 255); I've got code to work out the time of the day using a float currentHours to store the current hour of the day 10.5 = 10:30 am. This updates constantly and updates the sun as required. I am then calculating the appropriate colours for the time of day when relevant using else if( currentHour >= 4 && currentHour < 7) { // Lerp from night to morning Ogre::ColourValue lerp = Ogre::Math::lerp<Ogre::ColourValue, float>(sceneColours[GT_TOD_NIGHT].sky , sceneColours[GT_TOD_MORNING].sky, (currentHour - 4) / (7 - 4)); } My original attempt to get this to work was to dynamically generate a material with the new colour and apply that material to the skydome. This, as you can probably guess... didn't go well. I know it's possible to use shaders where you can pass information such as colour to the shader from the code but I am unsure if there is an existing simple shader to change a colour like this or if I need to create one. What is involved in creating a shader and material definition that would allow me to change the colour of a material without the overheads of dynamically generating materials all the time? EDIT : I've created a glsl vertex and fragment shaders as follows. Vertex uniform vec4 newColor; void main() { gl_FrontColor = newColor; gl_Position = ftransform(); } Fragment void main() { gl_FragColor = gl_Color; } I can pass a colour to it using ShaderDesigner and it seems to work. I now need to investigate how to use it within Ogre as a material. EDIT : I created a material file like this : vertex_program colour_vs_test glsl { source test.vert default_params { param_named newColor float4 0.0 0.0 0.0 1 } } fragment_program colour_fs_glsl glsl { source test.frag } material Test/SkyColor { technique { pass { lighting off fragment_program_ref colour_fs_glsl { } vertex_program_ref colour_vs_test { } } } } In the code I have tried : Ogre::MaterialPtr material = Ogre::MaterialManager::getSingleton().getByName("Test/SkyColor"); Ogre::GpuProgramParametersSharedPtr params = material->getTechnique(0)->getPass(0)->getVertexProgramParameters(); params->setNamedConstant("newcolor", Ogre::Vector4(0.7, 0.5, 0.3, 1)); I've set that as the Skydome material which seems to work initially. I am doing the same with the code that is attempting to lerp between colours, but when I include it there, it all goes black. Seems like there is now a problem with my colour lerping.

  Read the article

• SQL SERVER – Identity Fields – Contest Win Joes 2 Pros Combo (USD 198) – Day 2 of 5

  - by pinaldave

  August 2011 we ran a contest where every day we give away one book for an entire month. The contest had extreme success. Lots of people participated and lots of give away. I have received lots of questions if we are doing something similar this month. Absolutely, instead of running a contest a month long we are doing something more interesting. We are giving away USD 198 worth gift every day for this week. We are giving away Joes 2 Pros 5 Volumes (BOOK) SQL 2008 Development Certification Training Kit every day. One copy in India and One in USA. Total 2 of the giveaway (worth USD 198). All the gifts are sponsored from the Koenig Training Solution and Joes 2 Pros. The books are available here Amazon | Flipkart | Indiaplaza How to Win: Read the Question Read the Hints Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India residents only) 2 Winners will be randomly selected announced on August 20th. Question of the Day: Which of the following statement is incorrect? a) Identity value can be negative. b) Identity value can have negative interval. c) Identity value can be of datatype VARCHAR d) Identity value can have increment interval larger than 1 Query Hints: BIG HINT POST A simple way to determine if a table contains an identity field is to use the SSMS Object Explorer Design Interface. Navigate to the table, then right-click it and choose Design from the pop-up window. When your design tab opens, select the first field in the table to view its list of properties in the lower pane of the tab (In this case the field is ProductID). Look to see if the Identity Specification property in the lower pane is set to either yes or no. SQL Server will allow you to utilize IDENTITY_INSERT with just one table at a time. After you’ve completed the needed work, it’s very important to reset the IDENTITY_INSERT back to OFF. Additional Hints: I have previously discussed various concepts from SQL Server Joes 2 Pros Volume 2. SQL Joes 2 Pros Development Series – Output Clause in Simple Examples SQL Joes 2 Pros Development Series – Ranking Functions – Advanced NTILE in Detail SQL Joes 2 Pros Development Series – Ranking Functions – RANK( ), DENSE_RANK( ), and ROW_NUMBER( ) SQL Joes 2 Pros Development Series – Advanced Aggregates with the Over Clause SQL Joes 2 Pros Development Series – Aggregates with the Over Clause SQL Joes 2 Pros Development Series – Overriding Identity Fields – Tricks and Tips of Identity Fields SQL Joes 2 Pros Development Series – Many to Many Relationships Next Step: Answer the Quiz in Contact Form in following format Question Answer Name of the country (The contest is open for USA and India) Bonus Winner Leave a comment with your favorite article from the “additional hints” section and you may be eligible for surprise gift. There is no country restriction for this Bonus Contest. Do mention why you liked it any particular blog post and I will announce the winner of the same along with the main contest. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Joes 2 Pros, PostADay, SQL, SQL Authority, SQL Puzzle, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Improving performance of a particle system (OpenGL ES)

  - by Jason

  I'm in the process of implementing a simple particle system for a 2D mobile game (using OpenGL ES 2.0). It's working, but it's pretty slow. I start getting frame rate battering after about 400 particles, which I think is pretty low. Here's a summary of my approach: I start with point sprites (GL_POINTS) rendered in a batch just using a native float buffer (I'm in Java-land on Android, so that translates as a java.nio.FloatBuffer). On GL context init, the following are set: GLES20.glViewport(0, 0, width, height); GLES20.glClearColor(0.0f, 0.0f, 0.0f, 0.0f); GLES20.glEnable(GLES20.GL_CULL_FACE); GLES20.glDisable(GLES20.GL_DEPTH_TEST); Each draw frame sets the following: GLES20.glEnable(GLES20.GL_BLEND); GLES20.glBlendFunc(GLES20.GL_ONE, GLES20.GL_ONE_MINUS_SRC_ALPHA); And I bind a single texture: GLES20.glActiveTexture(GLES20.GL_TEXTURE0); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, textureHandle); GLES20.glUniform1i(mUniformTextureHandle, 0); Which is just a simple circle with some blur (and hence some transparency) http://cl.ly/image/0K2V2p2L1H2x Then there are a bunch of glVertexAttribPointer calls: mBuffer.position(position); mGlEs20.glVertexAttribPointer(mAttributeRGBHandle, valsPerRGB, GLES20.GL_FLOAT, false, stride, mBuffer); ...4 more of these Then I'm drawing: GLES20.glUniformMatrix4fv(mUniformProjectionMatrixHandle, 1, false, Camera.mProjectionMatrix, 0); GLES20.glDrawArrays(GLES20.GL_POINTS, 0, drawCalls); GLES20.glBindTexture(GLES20.GL_TEXTURE_2D, 0); My vertex shader does have some computation in it, but given that they're point sprites (with only 2 coordinate values) I'm not sure this is the problem: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform mat4 u_ProjectionMatrix; attribute vec4 a_Position; attribute float a_PointSize; attribute vec3 a_RGB; attribute float a_Alpha; attribute float a_Burn; varying vec4 v_Color; void main() { vec3 v_FGC = a_RGB * a_Alpha; v_Color = vec4(v_FGC.x, v_FGC.y, v_FGC.z, a_Alpha * (1.0 - a_Burn)); gl_PointSize = a_PointSize; gl_Position = u_ProjectionMatrix * a_Position; } My fragment shader couldn't really be simpler: #ifdef GL_ES // Set the default precision to low. precision lowp float; #endif uniform sampler2D u_Texture; varying vec4 v_Color; void main() { gl_FragColor = texture2D(u_Texture, gl_PointCoord) * v_Color; } That's about it. I had read that transparent pixels in point sprites can cause issues, but surely not at only 400 points? I'm running on a fairly new device (12 month old Galaxy Nexus). My question is less about my approach (although I'm open to suggestion) but more about whether there are any specific OpenGL "no no's" that have leaked into my code. I'm sure there's GL master out there facepalming right now... I'd love to hear any critique.

  Read the article

• Silverlight Cream for February 13, 2011 -- #1046

  - by Dave Campbell

  In this Issue: Loek van den Ouweland, Colin Eberhardt, Rudi Grobler, Joost van Schaik, Mike Taulty(-2-, -3-), Deborah Kurata, David Kelley, Peter Foot, Samuel Jack(-2-), and WindowsPhoneGeek(-2-). Above the Fold: Silverlight: "Silverlight Simple MVVM Commanding" Deborah Kurata WP7: "WP7 CustomInputPrompt control with Cancel button" WindowsPhoneGeek Expression Blend: "Silverlight Templated Image Button with two images" Loek van den Ouweland Shoutouts: Dave Campbell posted a write-up about the project he's on and the use of Sterling: Sterling Object-Oriented Database for ISO 1.0 Released!... Also see Jeremy Likness' post on the 1.0 release: Sterling Object-Oriented Database 1.0 RTM Not necessarily Silverlight, but darn cool, a great control by Sasha Barber: WPF : A Weird 3d based control snoutholder announced new content: Windows Phone 7 QuickStarts Live! From SilverlightCream.com: Silverlight Templated Image Button with two images Loek van den Ouweland has a video tutorial up for creating an ImageButton with a hover state... Expression Blend coolness, and check out the external links he has to their training site. Windows Phone 7 Performance Measurements – Emulator vs. Hardware Colin Eberhardt's latest is a popular post comparing performance metrics between the WP7 emulator and a real device. Mileage may vary, but I'm pretty sure the overall results are conculsive, and should help the way you view your app as you're building in the emulator. WP7: WebClient vs HttpWebRequest Rudi Grobler's latest is a discussion of WebClient and HttpWebRequest, gives coding examples of each plus discussion of why you may choose one over the other... and pay attention to his comment about mobile providers. A Blendable Windows Phone 7 / Silverlight clipping behavior Joost van Schaik posted this WP7/Silverlight clipping behavior he developed because all the other solutions were not blendable. Another really useful piece of code from Joost! Blend Bits 22–Being Stylish Mike Taulty has 3 more episodes in his Blend Bits series... first up is on one Styles... explicit, implicit, inheriting... you name it, he's covering it! Blend Bits 23–Templating Part 1 MIke Taulty then has the beginning of a series within his Blend Bits series on Templating. This is something you just have to either bite the bullet and go with Blend to do, or consume someone else's work. Mike shows us how to do it ourself by tweaking the visual aspects of a checkbox Blend Bits 24–Templating Part 2 In part 2 of the Templating series, Mike Taulty digs deeper into Blend and cracks open the Listbox control to take a bunch of the inner elements out for a spin... fun stuff and great tutorial, Mike! Silverlight Simple MVVM Commanding Deborah Kurata has another great MVVM post up... if you don't have your head wrapped around commanding yet, this is a good place to start that process... VB and C# as always. App Development for Windows Phone 7 101 David Kelley goes through the basics of producing a WP7 app both from the Silverlight and XNA side... good info and good external links to get you going. Copyable TextBlock for Windows Phone Peter Foot takes a look at the Copy/Paste functionality in WP7 and how to apply it to a TextBlock... which is NOT an out-of-the-box solution. How to deploy to, and debug, multiple instances of the Windows Phone 7 emulator Samuel Jack has a couple posts up this week... first is this clever one on running multiple copies of the emulator at once... too cool for debugging a multi-player game! Multi-player enabling my Windows Phone 7 game: Day 3 – The Server Side Samuel Jack's latest is a detailed look at his day 3 adventure of taking his multi-player game to WP7... lots of information and external links... what do you say, give him another day? :) WP7 CustomInputPrompt control with Cancel button WindowsPhoneGeek has a couple more posts up... first is this "CustomInputPrompt" control based off the InputPrompt from Coding4Fun. Implementing Windows Phone 7 DataTemplateSelector and CustomDataTemplateSelector In his latest post, WindowsPhoneGeek writes a DataTemplateSelector to allow different data templates for different list elements based on the type of the element. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Developing an Implementation Plan with Iterations by Russ Pitts

  - by user535886

  Developing an Implementation Plan with Iterations by Russ Pitts  Ok, so you have come to grips with understanding that applying the iterative concept, as defined by OUM is simply breaking up the project effort you have estimated for each phase into one or more six week calendar duration blocks of work. Idea being the business user(s) or key recipient(s) of work product(s) being developed never go longer than six weeks without having some sort of review or prototyping of the work results for an iteration…”think-a-little”, “do-a-little”, and “show-a-little” in a six week or less timeframe…ideally the business user(s) or key recipients(s) are involved throughout. You also understand the OUM concept that you only plan for that which you have knowledge of. The concept further defined, a project plan initially is developed at a high-level, and becomes more detailed as project knowledge grows. Agreeing to this concept means you also have to admit to the fallacy that one can plan with precision beyond six weeks into a project…Anything beyond six weeks is a best guess in most cases when dealing with software implementation projects. Project planning, as defined by OUM begins with the Implementation Plan view, which is a very high-level perspective of the effort estimated for each of the five OUM phases, as well as the number of iterations within each phase. You might wonder how can you predict the number of iterations for each phase at this early point in the project. Remember project planning is not an exact science, and initially is high-level and abstract in nature, and then becomes more detailed and precise as the project proceeds. So where do you start in defining iterations for each phase for a project? The following are three easy steps to initially define the number of iterations for each phase: Step 1 => Start with identifying the known factors… …Prior to starting a project you should know: · The agreed upon time-period for an iteration (e.g 6 weeks, or 4 weeks, or…) within a phase (recommend keeping iteration time-period consistent within a phase, if not for the entire project) · The number of resources available for the project · The number of total number of man-day (effort) you have estimated for each of the five OUM phases of the project · The number of work days for a week Step 2 => Calculate the man-days of effort required for an iteration within a phase… Lets assume for the sake of this example there are 10 project resources, and you have estimated 2,536 man-days of work effort which will need to occur for the elaboration phase of the project. Let’s also assume a week for this project is defined as 5 business days, and that each iteration in the elaboration phase will last a calendar duration of 6 weeks. A simple calculation is performed to calculate the daily burn rate for a single iteration, which produces a result of… ((Number of resources * days per week) * duration of iteration) = Number of days required per iteration ((10 resources * 5 days/week) * 6 weeks) = 300 man days of effort required per iteration Step 3 => Calculate the number of iterations that can occur within a phase Next calculate the number of iterations that can occur for the amount of man-days of effort estimated for the phase being considered… (number of man-days of effort estimated / number of man-days required per iteration) = # of iterations for phase (2,536 man-days of estimated effort for phase / 300 man days of effort required per iteration) = 8.45 iterations, which should be rounded to a whole number such as 9 iterations* *Note - It is important to note this is an approximate calculation, not an exact science. This particular example is a simple one, which assumes all resources are utilized throughout the phase, including tech resources, etc. (rounding down or up to a whole number based on project factor considerations). It is also best in many cases to round up to higher number, as this provides some calendar scheduling contingency.

  Read the article

• SQL SERVER – Speed Up! – Parallel Processes and Unparalleled Performance – TechEd 2012 India

  - by pinaldave

  TechEd India 2012 is just around the corner and I will be presenting there on two different session. SQL Server Performance Tuning is a very challenging subject that requires expertise in Database Administration and Database Development. I always have enjoyed talking about SQL Server Performance tuning subject. Just like doctors I like to call my every attempt to improve the performance of SQL Server queries and database server as a practice too. I have been working with SQL Server for more than 8 years and I believe that many of the performance tuning concept I have mastered. However, performance tuning is not a simple subject. However there are occasions when I feel stumped, there are occasional when I am not sure what should be the next step. When I face situation where I cannot figure things out easily, it makes me most happy because I clearly see this as a learning opportunity. I have been presenting in TechEd India for last three years. This is my fourth time opportunity to present a technical session on SQL Server. Just like every other year, I decided to present something different, something which I have spend years of learning. This time, I am going to present about parallel processes. It is widely believed that more the CPU will improve performance of the server. It is true in many cases. However, there are cases when limiting the CPU usages have improved overall health of the server. I will be presenting on the subject of Parallel Processes and its effects. I have spent more than a year working on this subject only. After working on various queries on multi-CPU systems I have personally learned few things. In coming TechEd session, I am going to share my experience with parallel processes and performance tuning. Session Details Title: Speed Up! – Parallel Processes and Unparalleled Performance (Add to Calendar) Abstract: “More CPU More Performance” – A  very common understanding is that usage of multiple CPUs can improve the performance of the query. To get maximum performance out of any query – one has to master various aspects of the parallel processes. In this deep dive session, we will explore this complex subject with a very simple interactive demo. An attendee will walk away with proper understanding of CX_PACKET wait types, MAXDOP, parallelism threshold and various other concepts. Date and Time: March 23, 2012, 12:15 to 13:15 Location: Hotel Lalit Ashok - Kumara Krupa High Grounds, Bengaluru – 560001, Karnataka, India. Add to Calendar Please submit your questions in the comments area and I will be for sure discussing them during my session. If I pick your question to discuss during my session, here is your gift I commit right now – SQL Server Interview Questions and Answers Book. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Wait Stats, SQL Wait Types, T SQL, Technology Tagged: TechEd, TechEdIn

  Read the article

• Motorola Droid App Recommendations

  - by Brian Jackett

  Just as a disclaimer, the views and opinions expressed in this post are solely my own and I’m not getting paid or compensated for anything.     Ok, so I’m one of the crazy few who went out and bought a Droid the week it was released a few months back.  The Motorola Droid was a MAJOR upgrade in phone capabilities for me as my previous phone had no GPS, no web access, limited apps, etc.  I now use my Droid for so much of my life from work to personal to community based events.  Since I’ve been using my Droid for awhile, a number of friends (@toddklindt, @spmcdonough, @jfroushiii, and many more) who later got a Droid asked me which apps I recommended.  While there are a few sites on the web listing out useful Android apps, here’s my quick list (with a few updates since first put together.) Note: * denotes a highly recommended app     Android App Recommendations for Motorola Droid (Updated after 2.1 update) RemoteDroid – install a thin client on another computer and Droid becomes mouse pad / keyboard, control computer remotely PdaNet – free version allows tethering (only to HTTP, no HTTPS) without paying extra monthly charge.  A paid version allows HTTPS access. SportsTap – keep track of about a dozen sports, favorite teams, etc *Movies – setup favorite theaters, find movie times, buy tickets, etc WeatherBug elite – paid app, but gives weather alerts, 4 day forecast, etc.  Free version also exists.  (Update: Android 2.1 offers free weather app, but I still prefer WeatherBug.) *Advanced Task Killer – manually free up memory and kill apps not needed Google Voice – have to have a Google Voice account to really use, but allows visual voice mail, sending calls to specific phones, and too many other things to list AndroZip – access your phone memory like a file system Twidroid – best Twitter client I’ve found so far, but personal preference varies.  I’m using free version and suits me just fine. Skype (beta) – I only use this to send chat messages, not sure how/if phone calls works on this. (Update: Skype Mobile app just released, but uninstalled after few days as it kept launching in background and using up memory when not wanted.) *NewsRob – RSS reader syncs to Google Reader.  I use this multiple times a day, excellent app. (Update: this app does ask for your Google username and password, so security minded folks be cautioned.) ConnectBot – don’t use often myself, but allows SSH into remote computer.  Great if you have a need for remote manage server. Speed Test – same as the online website, allows finding upload/download speeds. WiFinder – store wifi preferences and find wifi spots in area. TagReader – simple Microsoft Tag Reader, works great. *Google Listen – audible podcast catcher that allows putting items into a queue, sync with Google Reader RSS, etc. I personally love this app which has now replaced the iPod I used to use in my car, but have heard mixed reviews from others. Robo Defense – (paid app) tower defense game but with RPG elements to upgrade towers over lifetime playing. I’ve never played FieldRunners but I’m told very similar in offering. Nice distraction when in airport or have some time to burn. Phit Droid 3rd Edition – drag and drop block shapes into a rectangle box, simple game to pass the time with literally 1000s of levels. Note this game has been updated dozens of times with numerous editions so unsure exactly which are still on the market. Google Sky Map – impress your friends by holding Droid up to sky and viewing constellations using Droid screen. wootCheck Lite – check up on daily offerings on Woot.com and affiliated wine, sellout, shirt, and kids sites.   Side notes: I’ve seen that Glympse and TripIt have recently come out with Android apps.  I’ve installed but haven’t gotten to use either yet, but I hear good things.  Will try out on 2 upcoming trips in May and update with impressions.         -Frog Out   Image linked from http://images.tolmol.com/images/grpimages/200910191814100_motorola-droid.gif

  Read the article

• Silverlight Cream for March 08, 2011 -- #1056

  - by Dave Campbell

  In this Issue: Joost van Schaik, Manas Patnaik, Kevin Hoffman, Jesse Liberty, Deborah Kurata, Dhananjay Kumar, Dennis Delimarsky, Samuel Jack, Peter Kuhn, WindowsPhoneGeek, and Jfo. Above the Fold: Silverlight: "How I let the trees grow" Peter Kuhn WP7: "Simple Windows Phone 7 / Silverlight drag/flick behavior" Joost van Schaik Shoutouts: SilverlightShow has their top 5 from last week posted, plus the ECOContest is ready to be voted on: SilverlightShow for Feb 28 - March 06, 2011 Drew DeVault is a young man involved with the Microsoft Student Insiders. He gave a WP7 presentation at RMTT and has posted his material: Post-Session: Windows Phone 7 @ RMTT Rui Marinho has an app in the ECO Contest called Forest Findr. is based on the BIng Map Control for silverlight and Sql Spatial data, and helps you find Forests and get geolocated pictures and wikipedia information, and has a post up with a bunch of info on it here: Forest Findr. my entry on the SilverlightShow EcoContest From SilverlightCream.com: Simple Windows Phone 7 / Silverlight drag/flick behavior Joost van Schaik has a behavior that makes *anything* draggable and 'flickable' in WP7 ... read the intro, scroll to the bottom to watch the demo, and then grab up the code... cool stuff, Joost! Data Aggregation Using Presentation Model in RIA and Silverlight 4 Manas Patnaik sent me a link to his blog, and it appears he's got lots of Silverlight goodness out there so you'll be hearing more about him. This first post is on the Presentation Model in RIA and Silverlight 4... good discussion, diagrams and code... good job, Manas! WP7 for iPhone and Android Developers - Advanced UI Kevin Hoffman has part 3 of an ambitious 12-part tutorial series up on WP7 development ... this go-around is concentrating on Advanced UI - Panorama/Pivot controls, DataBinding, ObservableCollections, and Converters... whew! Sterling DB on top of Isolated Storage – 2 Jesse Liberty has part 2 of his Sterling series up... this time setting up the database in App.xaml so it can be used for dealing with tombstoning. Silverlight Charting: Formatting the Tick Marks Deborah Kurata's next chart tutorial is all about showing you how to continue to dress up your charts.. this time by formatting the tick marks... if you don't know what that is... check out the first image in the post. Stored Procedure in WCF Data Service Dhananjay Kumar has a very nice tutorial up on using a stored proc with WCF Data Services... I happen to know someone working on just that at this time. If you have this in mind, here's a step-by-step guide to getting it done. Windows Phone 7 – Episode 5 – Pages Dennis Delimarsky has part 5 of his WP7 tutorial series up and is discussing Pages in this 17 minute video. Unpacking Simon Squared: My mini framework-independent animation library Samuel Jack has not only Open-Sourced the WP7 game he built and blogged about, but he's now explaining some of the structure of the game in posts such as this one about the animation library he wrote that his game is built on. How I let the trees grow Peter Kuhn shares with us the code he used for the tree animation in his ECO Contest entry. There's a lot to learn in this post about performance ... the fully-animated tree has about 20K elements... 5K branches and 20K leaves... check it out. WP7 ToastPrompt in depth WindowsPhoneGeek takes a deep dive into the ToastPrompt control in the Coding4fun Toolkit... everything you need to completely use the control including sample code. Beware the loaded event Jfo talks about another frustration point she had with WP7 development, and that is around the use of the loaded event... read these tips from someone that's been there. Stay in the 'Light! Twitter SilverlightNews | Twitter WynApse | WynApse.com | Tagged Posts | SilverlightCream Join me @ SilverlightCream | Phoenix Silverlight User Group Technorati Tags: Silverlight    Silverlight 3    Silverlight 4    Windows Phone MIX10

  Read the article

• Database Mirroring on SQL Server Express Edition

  - by Most Valuable Yak (Rob Volk)

  Like most SQL Server users I'm rather frustrated by Microsoft's insistence on making the really cool features only available in Enterprise Edition.  And it really doesn't help that they changed the licensing for SQL 2012 to be core-based, so now it's like 4 times as expensive!  It almost makes you want to go with Oracle.  That, and a desire to have Larry Ellison do things to your orifices. And since they've introduced Availability Groups, and marked database mirroring as deprecated, you'd think they'd make make mirroring available in all editions.  Alas…they don't…officially anyway.  Thanks to my constant poking around in places I'm not "supposed" to, I've discovered the low-level code that implements database mirroring, and found that it's available in all editions! It turns out that the query processor in all SQL Server editions prepends a simple check before every edition-specific DDL statement: IF CAST(SERVERPROPERTY('Edition') as nvarchar(max)) NOT LIKE '%e%e%e% Edition%' print 'Lame' else print 'Cool' If that statement returns true, it fails. (the print statements are just placeholders)  Go ahead and test it on Standard, Workgroup, and Express editions compared to an Enterprise or Developer edition instance (which support everything). Once again thanks to Argenis Fernandez (b | t) and his awesome sessions on using Sysinternals, I was able to watch the exact process SQL Server performs when setting up a mirror.  Surprisingly, it's not actually implemented in SQL Server!  Some of it is, but that's something of a smokescreen, the real meat of it is simple filesystem primitives. The NTFS filesystem supports links, both hard links and symbolic, so that you can create two entries for the same file in different directories and/or different names.  You can create them using the MKLINK command in a command prompt: mklink /D D:\SkyDrive\Data D:\Data mklink /D D:\SkyDrive\Log D:\Log This creates a symbolic link from my data and log folders to my Skydrive folder.  Any file saved in either location will instantly appear in the other.  And since my Skydrive will be automatically synchronized with the cloud, any changes I make will be copied instantly (depending on my internet bandwidth of course). So what does this have to do with database mirroring?  Well, it seems that the mirroring endpoint that you have to create between mirror and principal servers is really nothing more than a Skydrive link.  Although it doesn't actually use Skydrive, it performs the same function.  So in effect, the following statement: ALTER DATABASE Mir SET PARTNER='TCP://MyOtherServer.domain.com:5022' Is turned into: mklink /D "D:\Data" "\\MyOtherServer.domain.com\5022$" The 5022$ "port" is actually a hidden system directory on the principal and mirror servers. I haven't quite figured out how the log files are included in this, or why you have to SET PARTNER on both principal and mirror servers, except maybe that mklink has to do something special when linking across servers.  I couldn't get the above statement to work correctly, but found that doing mklink to a local Skydrive folder gave me similar functionality. To wrap this up, all you have to do is the following: Install Skydrive on both SQL Servers (principal and mirror) and set the local Skydrive folder (D:\SkyDrive in these examples) On the principal server, run mklink /D on the data and log folders to point to SkyDrive: mklink /D D:\SkyDrive\Data D:\Data On the mirror server, run the complementary linking: mklink /D D:\Data D:\SkyDrive\Data Create your database and make sure the files map to the principal data and log folders (D:\Data and D:\Log) Viola! Your databases are kept in sync on multiple servers! One wrinkle you will encounter is that the mirror server will show the data and log files, but you won't be able to attach them to the mirror SQL instance while they are attached to the principal. I think this is a bug in the Skydrive, but as it turns out that's fine: you can't access a mirror while it's hosted on the principal either.  So you don't quite get automatic failover, but you can attach the files to the mirror if the principal goes offline.  It's also not exactly synchronous, but it's better than nothing, and easier than either replication or log shipping with a lot less latency. I will end this with the obvious "not supported by Microsoft" and "Don't do this in production without an updated resume" spiel that you should by now assume with every one of my blog posts, especially considering the date.

  Read the article

• Big Data – Operational Databases Supporting Big Data – Key-Value Pair Databases and Document Databases – Day 13 of 21

  - by Pinal Dave

  In yesterday’s blog post we learned the importance of the Relational Database and NoSQL database in the Big Data Story. In this article we will understand the role of Key-Value Pair Databases and Document Databases Supporting Big Data Story. Now we will see a few of the examples of the operational databases. Relational Databases (Yesterday’s post) NoSQL Databases (Yesterday’s post) Key-Value Pair Databases (This post) Document Databases (This post) Columnar Databases (Tomorrow’s post) Graph Databases (Tomorrow’s post) Spatial Databases (Tomorrow’s post) Key Value Pair Databases Key Value Pair Databases are also known as KVP databases. A key is a field name and attribute, an identifier. The content of that field is its value, the data that is being identified and stored. They have a very simple implementation of NoSQL database concepts. They do not have schema hence they are very flexible as well as scalable. The disadvantages of Key Value Pair (KVP) database are that they do not follow ACID (Atomicity, Consistency, Isolation, Durability) properties. Additionally, it will require data architects to plan for data placement, replication as well as high availability. In KVP databases the data is stored as strings. Here is a simple example of how Key Value Database will look like: Key Value Name Pinal Dave Color Blue Twitter @pinaldave Name Nupur Dave Movie The Hero As the number of users grow in Key Value Pair databases it starts getting difficult to manage the entire database. As there is no specific schema or rules associated with the database, there are chances that database grows exponentially as well. It is very crucial to select the right Key Value Pair Database which offers an additional set of tools to manage the data and provides finer control over various business aspects of the same. Riak Rick is one of the most popular Key Value Database. It is known for its scalability and performance in high volume and velocity database. Additionally, it implements a mechanism for collection key and values which further helps to build manageable system. We will further discuss Riak in future blog posts. Key Value Databases are a good choice for social media, communities, caching layers for connecting other databases. In simpler words, whenever we required flexibility of the data storage keeping scalability in mind – KVP databases are good options to consider. Document Database There are two different kinds of document databases. 1) Full document Content (web pages, word docs etc) and 2) Storing Document Components for storage. The second types of the document database we are talking about over here. They use Javascript Object Notation (JSON) and Binary JSON for the structure of the documents. JSON is very easy to understand language and it is very easy to write for applications. There are two major structures of JSON used for Document Database – 1) Name Value Pairs and 2) Ordered List. MongoDB and CouchDB are two of the most popular Open Source NonRelational Document Database. MongoDB MongoDB databases are called collections. Each collection is build of documents and each document is composed of fields. MongoDB collections can be indexed for optimal performance. MongoDB ecosystem is highly available, supports query services as well as MapReduce. It is often used in high volume content management system. CouchDB CouchDB databases are composed of documents which consists fields and attachments (known as description). It supports ACID properties. The main attraction points of CouchDB are that it will continue to operate even though network connectivity is sketchy. Due to this nature CouchDB prefers local data storage. Document Database is a good choice of the database when users have to generate dynamic reports from elements which are changing very frequently. A good example of document usages is in real time analytics in social networking or content management system. Tomorrow In tomorrow’s blog post we will discuss about various other Operational Databases supporting Big Data. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Big Data – Basics of Big Data Architecture – Day 4 of 21

  - by Pinal Dave

  In yesterday’s blog post we understood how Big Data evolution happened. Today we will understand basics of the Big Data Architecture. Big Data Cycle Just like every other database related applications, bit data project have its development cycle. Though three Vs (link) for sure plays an important role in deciding the architecture of the Big Data projects. Just like every other project Big Data project also goes to similar phases of the data capturing, transforming, integrating, analyzing and building actionable reporting on the top of  the data. While the process looks almost same but due to the nature of the data the architecture is often totally different. Here are few of the question which everyone should ask before going ahead with Big Data architecture. Questions to Ask How big is your total database? What is your requirement of the reporting in terms of time – real time, semi real time or at frequent interval? How important is the data availability and what is the plan for disaster recovery? What are the plans for network and physical security of the data? What platform will be the driving force behind data and what are different service level agreements for the infrastructure? This are just basic questions but based on your application and business need you should come up with the custom list of the question to ask. As I mentioned earlier this question may look quite simple but the answer will not be simple. When we are talking about Big Data implementation there are many other important aspects which we have to consider when we decide to go for the architecture. Building Blocks of Big Data Architecture It is absolutely impossible to discuss and nail down the most optimal architecture for any Big Data Solution in a single blog post, however, we can discuss the basic building blocks of big data architecture. Here is the image which I have built to explain how the building blocks of the Big Data architecture works. Above image gives good overview of how in Big Data Architecture various components are associated with each other. In Big Data various different data sources are part of the architecture hence extract, transform and integration are one of the most essential layers of the architecture. Most of the data is stored in relational as well as non relational data marts and data warehousing solutions. As per the business need various data are processed as well converted to proper reports and visualizations for end users. Just like software the hardware is almost the most important part of the Big Data Architecture. In the big data architecture hardware infrastructure is extremely important and failure over instances as well as redundant physical infrastructure is usually implemented. NoSQL in Data Management NoSQL is a very famous buzz word and it really means Not Relational SQL or Not Only SQL. This is because in Big Data Architecture the data is in any format. It can be unstructured, relational or in any other format or from any other data source. To bring all the data together relational technology is not enough, hence new tools, architecture and other algorithms are invented which takes care of all the kind of data. This is collectively called NoSQL. Tomorrow Next four days we will answer the Buzz Words – Hadoop. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Big Data, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Introducing MySQL for Excel

  - by Javier Treviño

  As part of the new product initiatives of the MySQL on Windows group we released a tool that makes the task of getting data in and out of a MySQL Database very friendly and intuitive, and we paired it with one of the preferred applications for data analysis and manipulation in Windows platforms, MS Excel. Welcome to MySQL for Excel, an add-in that is installed and accessed from within the MS Excel’s Data tab offering a wizard-like interface arranged in an elegant yet simple way to help users browse MySQL Schemas, Tables, Views and Procedures and perform data operations against them using MS Excel as the vehicle to drive the data in and out MySQL Databases. One of the coolest features we had in mind designing MySQL for Excel is simplicity. MS Excel is simple and easy to work with, thus liked by many Windows users because they don’t have to be software gurus to use it.  We applied the same principle by targeting MySQL for Excel to any kind of user, so if you are already familiarized with Excel’s interface you will find yourself working with MySQL data in no time. MySQL for Excel is shipped within the MySQL Installer as one of the tools in the suite; if prerequisites are already installed (.NET Framework 4.0, Visual Studio Tools for Office 4.0 and of course MS Office), installing the add-in involves a very few clicks and no further setup to use it. Being an Excel Add-In there is no executable file involved after the installation, running MS Excel and opening the add-in from its Data tab is all that is required. MySQL for Excel automatically integrates with MySQL Workbench (if installed) to share the same connections to MySQL Server installations, that way connections are defined just once in either product saving time.  Opening the Add-In brings the Welcome Panel at the right side of the Excel main window from which connections to MySQL Servers are shown grouped by Local VS Remote connections; then users can open any of those connections by double-clicking it and entering the password of the used account.  Additionally a user can create a connection by clicking on the New Connection action label or edit connections through MySQL Workbench (if installed) by clicking on the Manage Connections action label. Once a connection is opened, the Schema Selection panel is shown, at the top of it the selected connection (connection name, hostname/IP and username). Just below, a list of schemas is displayed where User Schemas are grouped first followed by System Schemas; users can double-click any selected schema to go to the next panel or select a schema and clicking the Next > button. Users can alternatively click on the < Back button to go back to the Welcome Panel to close the current connection and open a new one; also by clicking the Create New Schema action label they can create an empty new schema. Once a schema is opened the DB Object Selection panel is shown, this is actually the place where the fun stuff happens; from here users are able to perform actions against MySQL Tables, Views and Procedures. ">The actions available here are about importing data from a MySQL Table, View or Procedure to Excel, exporting Excel data to a new MySQL Table, appending Excel data to an existing MySQL Table or editing a MySQL Table’s data by using an Excel Worksheet as a user interface to update data in any row/column, insert new rows or delete existing rows in a very easy and friendly way. More blog posts will follow describing all of these actions, so stay tuned! Remember that your feedback is very important for us, so drop us a message: · MySQL on Windows (this) Blog - https://blogs.oracle.com/MySqlOnWindows/ · Forum - http://forums.mysql.com/list.php?172 · Facebook - http://www.facebook.com/mysql Cheers!

  Read the article

• Override ToString() in your Classes

  - by psheriff

  One of the reasons I love teaching is because of the questions that I get from attendees. I was giving a presentation at DevConnections and was showing a collection of Product objects. When I hovered over the variable that contained the collection, it looked like Figure 2. As you can see in the collection, I have actual product names of my videos from www.pdsa.com/videos being displayed. To get your data to appear in the data tips you must override the ToString() method in your class. To illustrate this, take the following simple Product class shown below: public class Product{  public string ProductName { get; set; }  public int ProductId { get; set; }} This class does not have an override of the ToString() method so if you create a collection of Product objects you will end up with data tips that look like Figure 1. Below is the code I used to create a collection of Product objects. I have shortened the code in this blog, but you can get the full source code for this sample by following the instructions at the bottom of this blog entry. List<Product> coll = new List<Product>();Product prod; prod = new Product()  { ProductName = "From Zero to HTML 5 in 60 Minutes",     ProductId = 1 };coll.Add(prod);prod = new Product()   { ProductName = "Architecting Applications …",     ProductId = 2 };coll.Add(prod);prod = new Product()  { ProductName = "Introduction to Windows Phone Development",    ProductId = 3 };coll.Add(prod);prod = new Product()   { ProductName = "Architecting a Business  …",     ProductId = 4 };coll.Add(prod);......   Figure 1: Class without overriding ToString() Now, go back to the Product class and add an override of the ToString() method as shown in the code listed below: public class Product{  public string ProductName { get; set; }  public int ProductId { get; set; }   public override string ToString()  {    return ProductName;  }} In this simple sample, I am just returning the ProductName property. However, you can create a whole string of information if you wish to display more data in your data tips. Just concatenate any properties you want from your class and return that string. When you now run the application and hover over the collection object you will now see something that looks like Figure 2. Figure 2: Overriding ToString() in your Class Another place the ToString() override comes in handy is if you forget to use a DisplayMemberPath in your ListBox or ComboBox. The ToString() method is called automatically when a class is bound to a list control. Summary You should always override the ToString() method in your classes as this will help you when debugging your application. Seeing relevant data immediately in the data tip without having to drill down one more layer and maybe scroll through a complete list of properties should help speed up your development process. NOTE: You can download the sample code for this article by visiting my website at http://www.pdsa.com/downloads. Select “Tips & Tricks”, then select “Override ToString” from the drop down list.  

  Read the article

• How to use a list of values in Excel as filter in a query

  - by Luca Zavarella

  It often happens that a customer provides us with a list of items for which to extract certain information. Imagine, for example, that our clients wish to have the header information of the sales orders only for certain orders. Most likely he will give us a list of items in a column in Excel, or, less probably, a simple text file with the identification code:     As long as the given values ??are at best a dozen, it costs us nothing to copy and paste those values ??in our SSMS and place them in a WHERE clause, using the IN operator, making sure to include the quotes in the case of alphanumeric elements (the database sample is AdventureWorks2008R2): SELECT * FROM Sales.SalesOrderHeader AS SOH WHERE SOH.SalesOrderNumber IN ( 'SO43667' ,'SO43709' ,'SO43726' ,'SO43746' ,'SO43782' ,'SO43796') Clearly, the need to add commas and quotes becomes an hassle when dealing with hundreds of items (which of course has happened to us!). It’d be comfortable to do a simple copy and paste, leaving the items as they are pasted, and make sure the query works fine. We can have this commodity via a User Defined Function, that returns items in a table. Simply we’ll provide the function with an input string parameter containing the pasted items. I give you directly the T-SQL code, where comments are there to clarify what was written: CREATE FUNCTION [dbo].[SplitCRLFList] (@List VARCHAR(MAX)) RETURNS @ParsedList TABLE ( --< Set the item length as your needs Item VARCHAR(255) ) AS BEGIN DECLARE --< Set the item length as your needs @Item VARCHAR(255) ,@Pos BIGINT --< Trim TABs due to indentations SET @List = REPLACE(@List, CHAR(9), '') --< Trim leading and trailing spaces, then add a CR\LF at the end of the list SET @List = LTRIM(RTRIM(@List)) + CHAR(13) + CHAR(10) --< Set the position at the first CR/LF in the list SET @Pos = CHARINDEX(CHAR(13) + CHAR(10), @List, 1) --< If exist other chars other than CR/LFs in the list then... IF REPLACE(@List, CHAR(13) + CHAR(10), '') <> '' BEGIN --< Loop while CR/LFs are over (not found = CHARINDEX returns 0) WHILE @Pos > 0 BEGIN --< Get the heading list chars from the first char to the first CR/LF and trim spaces SET @Item = LTRIM(RTRIM(LEFT(@List, @Pos - 1))) --< If the so calulated item is not empty... IF @Item <> '' BEGIN --< ...insert it in the @ParsedList temporary table INSERT INTO @ParsedList (Item) VALUES (@Item) --(CAST(@Item AS int)) --< Use the appropriate conversion if needed END --< Remove the first item from the list... SET @List = RIGHT(@List, LEN(@List) - @Pos - 1) --< ...and set the position to the next CR/LF SET @Pos = CHARINDEX(CHAR(13) + CHAR(10), @List, 1) --< Repeat this block while the upon loop condition is verified END END RETURN END At this point, having created the UDF, our query is transformed trivially in: SELECT * FROM Sales.SalesOrderHeader AS SOH WHERE SOH.SalesOrderNumber IN ( SELECT Item FROM SplitCRLFList('SO43667 SO43709 SO43726 SO43746 SO43782 SO43796') AS SCL) Convenient, isn’t it? You can find the script DBA_SplitCRLFList.sql here. Bye!!

  Read the article

• Welcome 2011

  - by PSteele

  About this time last year, I wrote a blog post about how January of 2010 was almost over and I hadn’t done a single blog post.  Ugh…  History repeats itself. 2010 in Review If I look back at 2010, it was a great year in terms of technology and development: Visited Redmond to attend the MVP Summit in February.  Had a great time with the MS product teams and got to connect with some really smart people. Continued my work on Visual Studio Magazine’s “C# Corner” column.  About mid-year, the column changed from an every-other-month print column to an every-other-month print column along with bi-monthly web-only articles.  Needless to say, this kept me even busier and away from my blog. Participated in another GiveCamp!  Thanks to the wonderful leadership of Michael Eaton and all of his minions, GiveCamp 2010 was another great success.  Planning for GiveCamp 2011 will be starting soon… I switched to DVCS full time.  After years of being a loyal SVN user, I got bit by the DVCS bug.  I played around with both Mercurial and Git and finally settled on Mercurial.  It’s seamless integration with Windows Explorer along with it’s wealth of plugins made me fall in love.  I can’t imagine going back and using a centralized version control system. Continued to work with the awesome group of talent at SRT Solutions.  Very proud that SRT won it’s third consecutive FastTrack award! Jumped off the BlackBerry train and enjoying the smooth ride of Android.  It was time to replace the old BlackBerry Storm so I did some research and settled on the Motorola DroidX.  I couldn’t be happier.  Android is a slick OS and the DroidX is a sweet piece of hardware.  Been dabbling in some Android development with both Eclipse and IntelliJ IDEA (I like IntelliJ IDEA a lot better!).   2011 Plans On January 1st I was pleasantly surprised to get an email from the Microsoft MVP program letting me know that I had received the MVP award again for my community work in 2010.  I’m honored and humbled to be recognized by Microsoft as well as my peers! I’ll continue to do some Android development.  I’m currently working on a simple app to get me feet wet.  It may even makes it’s way into the Android Market. I’ve got a project that could really benefit from WPF so I’ll be diving into WPF this year.  I’ve played around with WPF a bit in the past – simple demos and learning exercises – but this will give me a chance to build an entire application in WPF.  I’m looking forward to the increased freedom that a WPF UI should give me. I plan on blogging a lot more in 2011! Technorati Tags: Android,MVP,Mercurial,WPF,SRT,GiveCamp

  Read the article

• Moving the Oracle User Experience Forward with the New Release 7 Simplified UI for Oracle Sales Cloud

  - by mvaughan

  By Kathy Miedema, Oracle Applications User ExperienceIn September 2013, Release 7 for Oracle Cloud Applications became generally available for Oracle Sales Cloud and HCM Cloud. This significant release allowed the Oracle Applications User Experience (UX) team to finally talk freely about Simplified UI, a user experience project in the works since Oracle OpenWorld 2012. Simplified UI represents the direction that the Oracle user experience – for all of its enterprise applications – is heading. Oracle’s Apps UX team began by building a Simplified UI for sales representatives. You can find that today in Release 7, and it was demoed extensively during OpenWorld 2013 in San Francisco. This screenshot shows how Opportunities appear in the new Simplified UI for Oracle Sales Cloud, a user interface built for sales reps.Analyst Rebecca Wettemann, vice president of Nucleus Research, saw Simplified UI at Oracle Openworld 2013 and talked about it with CRM Buyer in “Oracle Revs Its Cloud Engines for a Better Customer Experience.” Wettemann said there are distinct themes to the latest release: "One is usability. Oracle Sales Cloud, for example, is designed to have zero training for onboarding sales reps, which it does," she explained. "It is quite impressive, actually -- the intuitive nature of the application and the design work they have done with this goal in mind."The software uses as few buttons and fields as possible, she pointed out. "The sales rep doesn't have to ask, 'what is the next step?' because she can see what it is."In fact, there are three themes driving the usability that Wettemann noted. They are simplicity, mobility, and extensibility, and we write more about them on the Usable Apps web site. These three themes embody the strategy for Oracle’s cloud applications user experiences.  Simplified UI for Oracle Sales CloudIn developing a Simplified UI for Oracle Sales Cloud, Oracle’s UX team concentrated on the tasks that sales reps need to do most frequently, and are most important. “Knowing that the majority of their work lives are spent on the road and on the go, they need to be able to quickly get in and qualify and convert their leads, monitor and progress their opportunities, update their customer and contact information, and manage their schedule,” Jeremy Ashley, Vice President of the Applications UX team, said.Ashley said the Apps UX team has a good reason for creating a Simplified UI that focuses on self-service. “Sales people spend the day selling stuff,” he said. “The only reason they use software is because the company wants to track what they’re doing.” Traditional systems of tracking that information include filling in a spreadsheet of leads or sales. Oracle wants to automate this process for the salesperson, and enable that person to keep everyone who needs to know up-to-date easily and quickly. Simplified UI addresses that problem by providing light-touch input.  “It has to be useful to the salesperson,” Ashley said about the Sales Cloud user experience. Simplified UI can tell sales reps about key opportunities, or provide information about a contact in just a click or two. Customer information is accessible quickly and easily with Simplified UI for the Oracle Sales Cloud.Simplified UI for Sales Cloud can also be extended easily, Ashley said. Users usually just need to add various business fields or create and modify analytical reports. The way that Simplified UI is constructed allows extensibility to happen by hiding or showing a few necessary fields. The Settings user interface, starting in release 7, allows for the simple configuration of the most important visual elements. “With Sales cloud, we identified a need to make the application useful and very simple,” Ashley said. Simplified UI meets that need. Where can you find out more?To find out more about the simplified UI and Oracle’s ongoing investment in applications user experience innovations, come to one of our sessions at a user group conference near you. Stay tuned to the Voice of User Experience (VoX) blog – the next post will be about Simplified UI and HCM Cloud.

  Read the article

• NHibernate 3.0 and FluentNHibernate, how to get up and running&hellip;.

  - by DesigningCode

  First up. Its actually really easy. I’m not very religious about my DB tech, I don’t really care, I just want something that works.  So I’m happy to consider all options if they provide an advantage, and recently I was considering jumping from NHibernate to EF 4.0.  However before ditching NHibernate and jumping to EF 4.0 I thought I should try the head version of NHibernates trunk and the Head version of FluentNHibernate. I currently have a “Repository / Unit of Work” Framework built up around these two techs.  All up it makes my life pretty simple for dealing with databases.   The problem is the current release of NHibernate + the Linq provider wasn’t too hot for our purposes.  Especially trying to plug it into older VB.NET code.   The Linq provider spat the dummy with VB.NET lambdas.  Mainly because in C# Query().Where(l => l.Name.Contains("x") || l.Name.Contains("y")).ToList(); is not the same as the VB.NET Query().Where(Function(l) l.Name.Contains("x") Or l.Name.Contains("y")).ToList VB.NET seems to spit out … well…. something different :-) so anyways… Compiling your own version of NHibernate and FluentNHibernate.  It’s actually pretty easy! First you’ll need to install tortisesvn NAnt and Git if you don’t already have them.  NHibernate first step, get the subversion trunk https://nhibernate.svn.sourceforge.net/svnroot/nhibernate/trunk/ into a directory somewhere.  eg \thirdparty\nhibernate Then use NAnt to build it.   (if you open the .sln it will show errors in that  AssemblyInfo.cs doesn’t exist ) to build it, there is a .txt document with sample command line build instructions,  I simply used :- NAnt -D:project.config=release clean build >output-release-build.log *wait* *wait* *wait* and ta da, you will have a bin directory with all the release dlls. FluentNHibernate This was pretty simple. there’s instructions here :- http://wiki.fluentnhibernate.org/Getting_started#Installation basically, with git, create a directory, and you issue the command git clone git://github.com/jagregory/fluent-nhibernate.git and wait, and soon enough you have the source. Now, from the bin directory that NHibernate spit out, take everything and dump it into the subdirectory “fluent-nhibernate\tools\NHibernate” Now, to build, you can use rake….which a ruby build system, however you can also just open the solution and build.   Which is what I did.  I had a few problems with the references which I simply re-added using the new ones.  Once built, I just took all the NHibnerate dlls, and the fluent ones and replaced my existing NHibernate / Fluent and killed off the old linq project. All I had to change is the places that used  .Linq<T>  and replace them with .Query<T>  (which was easy as I had wrapped it already to isolate my code from such changes) and hey presto, everything worked.  Even the VB.NET linq calls. I need to do some more testing as I’ve only done basic smoke tests, but its all looking pretty good, so for now, I will stick to NHibernate!

  Read the article

• Using the latest (stable release) of Oracle Developer Tools for Visual Studio 11.1.0.7.20.

  - by mbcrump

  +  = Simple and safe Data connections.   This guide is for someone wanting to use the latest ODP.NET quickly without reading the official documentation. This guide will get you up and running in about 15 minutes. I have reviewed my referral link to my simple Setting up ODP.net with Win7 x64 and noticed most people were searching for one of the following terms: “how to use odp.net with vs” “setup connection odp.net” “query db using odp and vs” While my article provided links and a sample tnsnames.ora file, it really didn’t tell you how to use it. I’m hoping that this brief tutorial will help. So before we get started, you will need the following: Download the following: www.oracle.com/technology/software/tech/dotnet/utilsoft.html from oracle and install it. It is the first one on the page. Visual Studio 2008 or 2010. It should be noted that The System.Data.OracleClient namespace is the OLD .NET Framework Data Provider for Oracle. It should not be used anymore as it has been depreciated. The latest version which is what we are using is Oracle.DataAccess.Client. First things first, Add a reference to the Oracle.DataAccess.Client after you install ODP.NET   Copy and paste the following C# code into your project and replace the relevant info including the query string and you should be able to return data. I have commented several lines of code to assist in understanding what it is doing.   Lambda Expression. using System; using System.Data; using Oracle.DataAccess.Client;   namespace ConsoleApplication1 {     class Program     {         static void Main(string[] args)         {           try         {             //Setup DataSource             string oradb = "Data Source=(DESCRIPTION ="                                    + "(ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = hostname)(PORT = 1521)))"                                    + "(CONNECT_DATA = (SERVICE_NAME = SERVICENAME))) ;"                                    + "Persist Security Info=True;User ID=USER;Password=PASSWORD;";                        //Open Connection to Oracle - this could be moved outside the try.             OracleConnection conn = new OracleConnection(oradb);             conn.Open();               //Create cmd and use parameters to prevent SQL injection attacks.             OracleCommand cmd = new OracleCommand();             cmd.Connection = conn;               cmd.CommandText = "select username from table where username = :username";               OracleParameter p1 = new OracleParameter("username", OracleDbType.Varchar2);             p1.Value = username;             cmd.Parameters.Add(p1);               cmd.CommandType = CommandType.Text;               OracleDataReader dr = cmd.ExecuteReader();             dr.Read();               //Contains the value of the datarow             Console.WriteLine(dr["username"].ToString());               //Disposes of objects.             dr.Dispose();             cmd.Dispose();             conn.Dispose();         }           catch (OracleException ex) // Catches only Oracle errors         {             switch (ex.Number)             {                 case 1:                     Console.WriteLine("Error attempting to insert duplicate data.");                     break;                 case 12545:                     Console.WriteLine("The database is unavailable.");                     break;                 default:                     Console.WriteLine(ex.Message.ToString());                     break;             }         }           catch (Exception ex) // Catches any error not previously caught         {                   Console.WriteLine("Unidentified Error: " + ex.Message.ToString());              }         }       }           } At this point, you should have a working Program that returns data from an oracle database. If you are still having trouble then drop me a line and I will be happy to assist. As of this writing, oracle has announced the latest beta release of ODP.NET 11.2.0.1.1 Beta.  This release includes .NET Framework 4 and .NET Framework 4 Client Profile support. You may want to hold off on this version for a while as its BETA, and I wouldn’t want any production code using any BETA software.

  Read the article

• Twice as long and half as long

  - by PointsToShare

  We are in a project and we hit some snags. What’s a snag? An activity that takes longer than expected. Actually it takes longer than the time assigned to it by an over pressed PM who accepts an impossible time table and tries his best to make it possible, but I digress (again!).  So we have snags and we also have the opposite. Let’s call these “cinches”. The question is: how does a combination of snags and cinches affect the project timeline? Well, there is no simple answer. It depends on the projects dependencies as we see in the PERT chart. If all the snags are in the critical path and all the cinches are elsewhere then the cinches don’t help at all. In fact any snag in the critical path will delay the project.  Conversely, a cinch in the critical path will expedite it. A snag outside the critical path might be serious enough to even change the critical path. Thus without the PERT chart, we cannot really tell. Still there is a principle involved – Time and speed are non-linear! Twice as long adds a full unit, half as long only takes ½ unit away. Let’s just investigate a simple project. It consists of two activities – S and C - each estimated to take a week. Alas, S is a snag and really needs twice the time allotted and – a sigh of relief – C is a cinch and will take half the time allotted, so everything is Hun-key-dory, or is it?  Even here the PERT chart is important. We have 2 cases: 1: S depends on C (or vice versa) as in when the two activities are assigned to one employee. Here the estimated time was 1 + 1 and the actual time was 2 + ½ and we are ½ week late or 25% late. 2: S and C are done in parallel. Here the estimated time was 1, but the actual time is 2 – we are a whole week or 100% late. Let’s change the equation a little. S need 1.5 and C needs .5 so in case 1, we have the loss fully compensated by the gain, but in case 2 we are still behind. There are cases where this really makes no difference. This is when the critical path is not affected and we have enough slack in the other paths to counteract the difference between its snags and cinches – Let’s call this difference DSC. So if the slack is greater than DSC the project will not suffer. Conclusion: There is no general rule about snags and cinches. We need to examine each case within its project, still as we saw in the 4 examples above; the snag is generally more powerful than the cinch. Long live Murphy! That’s All Folks

  Read the article

• Hide and Unhide Worksheets and Workbooks in Excel 2007 & 2010

  - by DigitalGeekery

  Hiding worksheets can be a simple way to protect data in Excel, or just a way reduce the clutter of a some tabs. Here are a couple very easy ways to hide and unhide worksheets and workbooks in Excel 2007 / 2010. Hiding a Worksheet Select the Worksheet you’d like to hide by clicking on the tab at the bottom. By holding down the Ctrl key while clicking you can select multiple tabs at one time. On the Home tab, click on Format, which can be found in the Cells group. Under Visibility,  select Hide & Unhide, then Hide Sheet.   You can also simply right-click on the tab, and select Hide.   Your worksheet will no longer be visible, however, the data contained in the worksheet can still be referenced on other worksheets.   Unhide a Worksheet To unhide a worksheet, you just do the opposite. On the Home tab, click on Format in the Cells group and then under Visibility,  select Hide & Unhide, then Unhide Sheet.   Or, you can right-click on any visible tab, and select Unhide.   In the Unhide pop up window, select the worksheet to unhide and click “OK.” Note: Although you can hide multiple sheets at once, you can only unhide one sheet at a time. Very Hidden Mode While hidden mode is nice, it’s not exactly ultra-secure. If you’d like to pump the security up a notch, there is also Very Hidden mode. To access Very Hidden setting, we’ll have to use the built-in Visual Basic Editor by hitting the Alt + F11 keys. Select the worksheet you wish to hide from the dropdown list under Properties or by single clicking the worksheet in the VBAProject window. Next, set the Visible property to  2 – xlSheetVeryHidden. Close out of the Visual Basic Editor when finished.   When the Very Hidden attribute is set on a worksheet, Unhide Sheet is still unavailable from within the Format setting on the Home tab.   To remove the Very Hidden attribute and display the worksheet again, go back into the Visual Basic Editor by hitting Alt + F11 again and setting the Visible property back to –1 – xlSheetVisible.  Close out of the Editor when finished. Hiding a Workbook To hide the entire Workbook, select the View tab, and then click the Hide button. You’ll see the Workbook has disappeared. Unhide a Workbook Select the View tab and click Unhide… … and your Workbook will be visible again.   Just a few simple ways to hide and unhide your Excel worksheets and workbooks. Similar Articles Productive Geek Tips How To Copy Worksheets in Excel 2007 & 2010Add Background Pictures To Excel 2007 WorksheetsMake Row Labels In Excel 2007 Freeze For Easier ReadingImport Microsoft Access Data Into ExcelMagnify Selected Cells In Excel 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Discover Latest Android Apps On AppBrain The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster

  Read the article

• Kill all the project files!

  - by jamiet

  Like many folks I’m a keen podcast listener and yesterday my commute was filled by listening to Scott Hunter being interviewed on .Net Rocks about the next version of ASP.Net. One thing Scott said really struck a chord with me. I don’t remember the full quote but he was talking about how the ASP.Net project file (i.e. the .csproj file) is going away. The rationale being that the main purpose of that file is to list all the other files in the project, and that’s something that the file system is pretty good at. In Scott’s own words (that someone helpfully put in the comments): A file that lists files is really redundant when the OS already does this Romeliz Valenciano correctly pointed out on Twitter that there will still be a project.json file however no longer will there be a need to keep a list of files in a project file. I suspect project.json will simply contain a list of exclusions where necessary rather than the current approach where the project file is a list of inclusions. On the face of it this seems like a pretty good idea. I’ve long been a fan of convention over configuration and this is a great example of that. Instead of listing all the files in a separate file, just treat all the files in the directory as being part of the project. Ostensibly the approach is if its in the directory, its part of the project. Simple. Now I’m not an ASP.net developer, far from it, but it did occur to me that the same approach could be applied to the two Visual Studio project types that I am most familiar with, SSIS & SSDT. Like many people I’ve long been irritated by SSIS projects that display a faux file system inside Solution Explorer. As you can see in the screenshot below the project has Miscellaneous and Connection Managers folders but no such folders exist on the file system: This may seem like a minor thing but it means useful Solution Explorer features like Show All Files and Open Folder in Windows Explorer don’t work and quite frankly it makes me feel like a second class citizen in the Microsoft ecosystem. I’m a developer, treat me like one. Don’t try and hide the detail of how a project works under the covers, show it to me. I’m a big boy, I can handle it! Would it not be preferable to simply treat all the .dtsx files in a directory as being part of a project? I think it would, that’s pretty much all the .dtproj file does anyway (that, and present things in a non-alphabetic order – something else that wildly irritates me), so why not just get rid of the .dtproj file? In the case of SSDT the .sqlproj actually does a whole lot more than simply list files because it also states the BuildAction of each file (Build, NotInBuild, Post-Deployment, etc…) but I see no reason why the convention over configuration approach can’t help us there either. Want to know which is the Post-deployment script? Well, its the one called Post-DeploymentScript.sql! Simple! So that’s my new crusade. Let’s kill all the project files (well, the .dtproj & .sqlproj ones anyway). Are you with me? @Jamiet

  Read the article

• Impressions of my ASUS eee slate EP121 - Dual core 4GB, 64GB SSD

  - by tonyrogerson

  This thing is lovely, very nice bluetooth keyboard that has nice feedback on the keypress, there is no mouse but you can use the stylus or get yourself a bluetooth mouse, me, I've opted for a Microsoft ARC mouse which is a delight to use, the USB doors are a pain to open for the first time if like me you don't have any finger nails. It came as a suprise that the slate shows four processors, Dual Core with multi-threading, I didn't really look at the processor I was more interested in the amount of memory and the SSD; you don't get the full 4GB even with the 64 bit version of Windows 7 installed (which I immediately upgraded to Ultimate through my MSDN subscription). The box is extremely responsive - extremely, it loads Winword in literally a second. I've got office 2010 and onenote 2010 on there now; one problem is that on applying all (43) windows updates since the upgrade the machine is still sat on step 3 of 3 on the start up configuring updates screen after about an hour, you can't turn this machine off without using a paper clip to reset it and as I have just found you need a paper clip :). Installing Windows 7 SP1 was effortless. One of the first things I did on it was to reduce the size of the font, by default its set at 125%, my eye sight is ok :) so I've set that back down. Amazon Kindle for the PC works really well, plenty of text on the screen when viewed portrait, the case it comes with also allows the slate to stand up in various positions - portrait, horizontal - seems stable enough. The wireless works well, seems to have a better signal than my other two laptop machines which is good news. The gadget passed the pose test at work :). I use offline files to keep a copy of all my work stuff locally, I'm not sure what it is, well, its probably my server but whenever I try and sync it runs for a couple of minutes then fails with network name no longer contactable, funnily enough its fine from my big laptop so I can only guess this may be a driver type issue on the EP121 itself - very odd and very annoying. I do a lot of presenting and need to plug into a VGA project because most sites that's all that is offered, the EP121 has a mini-hdmi output which is great except for this scenario, hdmi is digital, vga is analogue, you will struggle to find a cost effective solution, I found HDFury and also a device HP do, however, a better solution appears to be getting a USB graphics adapter for instance the one I've ordered is the ClimaxDigital USB 2.0 to DVI,VGA or HDMI Adaptor which gives everything I need - VGA and DVI output and great resolution as well - ok, so fingers crossed because I'm presenting next Wednesday in Edinburgh and not taking my 300kg lenovo w700 (I'm sure my back just sighed in relief) - it certainly works really well on my LED TV, the install was simple - it just works! One of the several reasons for buying this piece of kit was to use it on my LED TV to remote into my main machine to check stuff whilst sat in my living room, also to watch webcasts and lecture videos in comfort away from my office, because of the wireless speed and limitation I'm opting for a USB network adapter from Belkin - that will also allow me to take advantage of my home gigabit network, there are only 2 usb ports on the slate so I'm going to knock up a hub so connecting it in is straight forward and simple, I'm also going to purchase a second power supply so I don't have to faff about with that either.I now have the developer x64 edition of SQL Server 2008 R2, yes everything :) - about 16GB left to play with on the machine now but that will be fine, I'll put AdventureWorks on there so I can play and demo stuff which is all I'm after from this, my development machine is significantly more powerful and meets my storage needs too.Travel test this weekend and next week, I'm in Dundee for my final exam for the masters degree.

  Read the article

• Surviving MATLAB and R as a Hardcore Programmer

  - by dsimcha

  I love programming in languages that seem geared towards hardcore programmers. (My favorites are Python and D.) MATLAB is geared towards engineers and R is geared towards statisticians, and it seems like these languages were designed by people who aren't hardcore programmers and don't think like hardcore programmers. I always find them somewhat awkward to use, and to some extent I can't put my finger on why. Here are some issues I have managed to identify: (Both): The extreme emphasis on vectors and matrices to the extent that there are no true primitives. (Both): The difficulty of basic string manipulation. (Both): Lack of or awkwardness in support for basic data structures like hash tables and "real", i.e. type-parametric and nestable, arrays. (Both): They're really, really slow even by interpreted language standards, unless you bend over backwards to vectorize your code. (Both): They seem to not be designed to interact with the outside world. For example, both are fairly bulky programs that take a while to launch and seem to not be designed to make simple text filter programs easy to write. Furthermore, the lack of good string processing makes file I/O in anything but very standard forms near impossible. (Both): Object orientation seems to have a very bolted-on feel. Yes, you can do it, but it doesn't feel much more idiomatic than OO in C. (Both): No obvious, simple way to get a reference type. No pointers or class references. For example, I have no idea how you roll your own linked list in either of these languages. (MATLAB): You can't put multiple top level functions in a single file, encouraging very long functions and cut-and-paste coding. (MATLAB): Integers apparently don't exist as a first class type. (R): The basic builtin data structures seem way too high level and poorly documented, and never seem to do quite what I expect given my experience with similar but lower level data structures. (R): The documentation is spread all over the place and virtually impossible to browse or search. Even D, which is often knocked for bad documentation and is still fairly alpha-ish, is substantially better as far as I can tell. (R): At least as far as I'm aware, there's no good IDE for it. Again, even D, a fairly alpha-ish language with a small community, does better. In general, I also feel like MATLAB and R could be easily replaced by plain old libraries in more general-purpose langauges, if sufficiently comprehensive libraries existed. This is especially true in newer general purpose languages that include lots of features for library writers. Why do R and MATLAB seem so weird to me? Are there any other major issues that you've noticed that may make these languages come off as strange to hardcore programmers? When their use is necessary, what are some good survival tips? Edit: I'm seeing one issue from some of the answers I've gotten. I have a strong personal preference, when I analyze data, to have one script that incorporates the whole pipeline. This implies that a general purpose language needs to be used. I hate having to write a script to "clean up" the data and spit it out, then another to read it back in a completely different environment, etc. I find the friction of using MATLAB/R for some of my work and a completely different language with a completely different address space and way of thinking for the rest to be a huge source of friction. Furthermore, I know there are glue layers that exist, but they always seem to be horribly complicated and a source of friction.

  Read the article

< Previous Page | 248 249 250 251 252 253 254 255 256 257 258 259  | Next Page >