Search Results

Search found 14236 results on 570 pages for 'times square'.

Page 253/570 | < Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >

• Tracking down random BSOD on windows 7

  - by pehrs

  I have gotten a computer running windows 7 handed to me that randomly, several times a day, bsods with a PAGE_FAULT_IN_NONPAGED_AREA (50) or WHEA_UNCORRECTABLE_ERROR (124). Crashes happens regardless of load. I am running out of ideas for how to track this down. Analyzing the minidumps shows the crash to be in ntkrnlmp.exe/WMIADAP.exe System has plenty of power (600w) Ram checks out fine using memtest86+ over a weekend. System is clean inside. No dust build up. Temperatures stay low. As far as I know (and reliability history shows) no new drivers were installed for several months before the problems started. All drivers are now up to date. sfc /scannow reports the system as clean. CHKDSK reports the disks as clean Removing the AV (Avast) has no effect. Any more things that should be tried on windows 7 before I start replacing the hardware?

  Read the article

• Process of carrying out a BER Test

  - by data

  I am subscribed to an ISP supplying a 3meg ADSL line. Lately (for the last 4 weeks) speeds have dropped from the usual average downstream speed of ~250kbps to just 0.14Mbps (according to speedtest.net) and employees are complaining about lack of access to the server. I have been calling customer support and logging calls for the last 3 weeks, but they have been unable to determine the source of the problem other than carrying out a few bitstream tests and checking the DHCP renewal times. I am going to call back and suggest carrying out a BER test. What type of equipment is needed to carry out this test? I have access to a wide range of Cisco networking equipment. Other: We don't need a leased line as there are less than ten employees.

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

• Beginners advice on Small business network disk(s)

  - by Rob

  We are having 10 PCs used by various user and presently use one network disk (a LaCie NAS) for all our data. Everything is Windows Vista and our collective IT hardware knowledge is minimal. This worked well generally. However, recently the disk freqently loses connection from the network (2-3 times per week) and the only way back seems to be the "turn it off and back on" trick. This obviously cant be any good for the disk. I understand that there are various more sophisticated ways of storing data and was wondering what people would recommend. One of the worries is obviously disk failure (either in part or as a whole) and the lack of continued availability due to network issues. I would guess that a disk which replicates data wouldnt work as a sole solution due to the network connection, but dont know what hardware (and/or software) would/could work in our case. In terms of size, we are looking at very small amounts, ie. less than 500 GB in total.

  Read the article

• Firefox Not responding - Windows 7

  - by Paul

  Have just upgraded from Vista to Win7 (32 bit). On vista Firefox worked great. I am using 3.5.6 version. 2GB RAM. In windows 7 however whenever i click on a link, field or tab within the browser or various other places within firefox 'Not Responding' flashes on the title bar. Most of the time i have to click 2 or 3 times to get any link or whatever to work which is very annoying. Any ideas? Can't find anything obvious on google but notice other people get Not Responding messages a lot with various apps. Chrome Plus seems to be fine.

  Read the article

• Suggestions for wireless adapter

  - by Michael Kniskern

  I recently purchased a desktop computer and it did not come with a wireless network card. I am currently using the Belkin Wireless G USB Adapter and it is a very sub par product. It has very slow response times and download speeds with just basic browsing and downloads podcasts through iTunes. Does anyone have a better suggestion for a wireless adapter? Should I go with another USB adapter or one that connects directly into the motherboard? I am current using Windows Vista 64 bit Home Premium.

  Read the article

• APC module causing strange error

  - by clifgriffin

  When I run php -v I get: PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules/apc.so' - /usr/lib64/php/modules/apc.so: undefined symbol: php_pcre_exec in Unknown on line 0 This isn't my first rodeo. I've setup APC multiple times. This is a MediaTemple Dedicated Virtual 4.0 with Plesk 11. Plesk 11 is the only thing essentially different from the other servers I've set this up on. I've verified that pcre-devel is installed. I've compiled APC from source as well as used pecl to install it. No difference. I also tried downgrading to APC 3.0.19, with no love.

  Read the article

• Allow WRITE access to local folders machine in 2003SBS AD

  - by Dan M.

  Have a SBS2003 client with a mess of a domain that is in process of being cleaned. But, for the life of me I cannot find a setting that will allow write access to the local hard disk for domain users with redirected profiles(to the server). This is needed only for one program that will not follow a symbolic link to the network path, instead it seems to be hard coded to the %appdata% folder but only on the c: drive.... So question is how can I allow "Domain users" write access to the local %appdata% directory? I have tried setting it manually on a machine but it kept resetting to RO no matter how many times I tried. Every time I would un-check the RO property it would reset sometime right after i hit OK. Thanks in advance! Dan

  Read the article

• DB auto failover in c# does not work when the principal server physically goes offline

  - by user62521

  I'm setting up DB auto failover in C# with SQL Server 2008 and I have a 'high safety with automatic failover mirror' using a witness setup and my connection string looks like "Server=tcp:DC01; Failover Partner=tcp:DC02; database=dbname; uid=sewebsite;pwd=somerndpwd;Connect Timeout=10;Pooling=True;" During testing, when I turn off the SQL Server service on the principal server the auto failover works like a charm, but if I take the principal server offline (by shutting down the server or killing the network card) auto failover does not work and my website just times out. I found this article where the second last post suggests that its because we are using named pipes which does not work when the principal goes offline, but we force TCP in our connection string. What am I missing to get this DB auto failover working?

  Read the article

• Why do my proxy settings keep changing?

  - by tjrobinson

  I am running Windows 7 and a few times a day the "Use a proxy server for your LAN (These settings will not apply to dial-up of VPN connections)." under "Local Area Network (LAN) Settings" checkbox becomes checked seemingly on it's own. Am I pressing some kind of hidden keyboard shortcut accidentally? What sort of applications might alter this setting and why? Unfortunately as this is a developer box, there's a lot of stuff that could be interfering, e.g. Visual Studio 2010, Windows Azure SDK and various browsers. Has anyone else come across this?

  Read the article

• how to make a very large radmind image, faster

  - by Wang

  Making the new Snow Leopard radmind image* for my lab involves manipulating over 50GB of applications, including passing them over the network. Each try takes four hours or more, and if it fails there's no apparent way to pick up again from partway through. Instead I have to delete all the data (a minutes-long operation) and start over. Furthermore, one successful upload just means now I get to test whether the image works; if it doesn't, I can look forward to repeating the upload as many times as I need to troubleshoot. How can I do this faster and/or smarter?

  Read the article

• Is there a way to copy/paste with iterm2 on osx over ssh with tmux and vim?

  - by Aaron Gibralter

  Given I am SSHed into a server and have tmux running, is there any straightforward way to be able to yank into a register in vim and: have that text be available in my tmux clipboard? have that text available in my osx clipboard? I know how to copy/paste in tmux and iterm2 seems to handle passing that onto my osx clipboard. However there are times when I want to yank text in a vim split screen and the tmux copy/paste won't do. Anyone figured this out? Thanks so much!

  Read the article

• What does this WinImage Error Mean?

  - by Kryten

  Hi, I am using WinImage (version 8.0) on Windows XP SP3 to create a VHD File from my Hard Drive, however, everytime I try to, everytime it says: "I/O error in reading data on position 000000007cd40000:00010000. Error 23: Data Error (cyclic redundancy check)." with the options "Abort", "Retry", "Skip" & "Skip All". Everytime I try "Retry" the message comes, if I click skip another message comes up (same as above, except the data position). I have run "CHKDSK /F /R" several times, but the error always appears. What is wrong? Can I safely skip the Errors? Is there anything I can do to fix the error?

  Read the article

• Ubuntu 9.10: switch in KVM, mouse is detected but not usable immediately

  - by CarlF

  I use a KVM switch to jump between my tower and laptop, both placed on my desk. With Ubuntu 9.04 this worked perfectly. In 9.10, when I switch to the tower, then back to the laptop, the mouse is detected (as shown by /var/log/messages) but moving it has no effect. If I use Ctrl-Alt-F1 to switch to the TTY, then Alt-F7 back to Xorg, the mouse starts working. The tower is running Windows 7, but that shouldn't matter. Sometimes, but not other times, the USB keyboard on the KVM switch is also not usable and I have to use the laptop's built-in keyboard to switch to the TTY. The laptop has two monitors, the built-in and an external. It's (obviously) the external panel that is attached via the KVM switch. Any suggestions? Report to Canonical as a bug?

  Read the article

• MBP becomes very hot after using Xcode

  - by Globalhawk

  Hardware: MBP early 2011 version OS: Mountain lion App: Xcode 4.5.2 Problem: Every time when I start Xcode, 2 or 3 processes called "git" start running. But when I quit Xcode the "git" process won't quit and are still using a lot of CPU. Then the computer becomes quite hot and the battery gets drained very quickly. If I manually kill these processes the problem is gone. I tried to reinstall Xcode several times but the problem comes back every time. It drives me crazy. Any help will be appreciated!

  Read the article

• Munin fills server memory

  - by danilo

  In the last weeks, it happened several times to me that my vserver (Debian Lenny) was out of RAM (500M) and therefore wasn't able to run apache anymore. When looking at the processes with top, I saw that there were many open munin-limits and munin-cron processes that consumed most of the memory. My guess would be that sometimes Apache temporarily needs more memory, which prevents munin-cron from running. And if munin-cron isn't able to stop itself, it would fill the memory until nothing is left. I don't know whether this guess is true, but could maybe someone know what the problem is and how to prevent it? If necessary I'll remove munin, but I'd prefer to keep it running.

  Read the article

• Why is a single thread spread across CPU's?

  - by Marcus Lindblom

  I'm just curious why the scheduler constantly moves an app between CPUs, rather than keeping it on one. It looks a bit silly to have 4 cores at 25% rather than one at 100%. Does it has to do with heat, or is it more efficient somehow? Do other OS's do it differently? Insights or links to in-depth stuff would be nice. (Couldn't find much myself.) Update: By "spread out" I don't mean that it executes on several cpu's at once, but is being moved from one to the other several times per second, making the effect that it looks spread out.

  Read the article

• Explorer.exe does not starts itself at the startup

  - by Maven

  The problem I am facing is whenever I start my PC after use login window where it should show the start screen my PC just doesn’t show anything except for a mouse cursor. I can press CTRL ALT DELETE and go into task manager go into File Run New Task and then run explorer.exe sometimes this works and start screen becmoes accesible but sometimes I have to repeat it multiple times to make it work or sometimes I just have to restart my PC. More over while on the black screen and being able to access task manager If I right click processes there and open containing folder that also work I can access all my program/files from there but all that is missing is my desktop and start screen Can anybody help me with this? Plus can anybody tell like for explorer there is explorer.exe is there a .exe file which would start the start screen ?

  Read the article

• OpenVPN Setup - Service Won't Start

  - by Lenwood

  I'm in the process of setting up OpenVPN on a VPS running Debian 6. I've walked step-by-step through this guide twice now, and I can't get the service to start. When I start the service, the error reported in the log file is: Cannot ioctl TUNSETIFF tun: Inappropriate ioctl for device (errno=25) I've searched the web a few times and I'm not finding anything helpful. I've tried: Changing file permissions: no change Deleting the file: get an error stating no file found (errno=2) Making a folder named "tun": get an error stating no file found (errno=2) I've wiped my installation and completed the steps verbatim twice now. I get no errors along the way, just the error above within my log file. The contents of my server.conf file are listed below, minus all the comments for brevity. Can anyone help? port 1194 proto udp dev tun ca ca.crt cert myserver.crt key myserver.key dh dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log log openvpn.log verb 3

  Read the article

• Unable to sync the Zune software with my HTC HD7

  - by Varpi

  I have a brand new HTC HD7 with Windows Phone 7, with no Software installed. I am running on Windows 7 64 bit. Whenever I try to sync my Mobile Device with Zune- I get this message: Can't connect to your phone. Disconnect it, restart it, then try connecting again I've downloaded latest Zune software and all updates. I don't have any certificates on my personal certificates. My phone is listed under Portable devices in Device manager (It shows as phone with driver version 4.7.965.0). I've restarted both my computer and the mobile device few times. I tried unlocking the device during the Zune sync Any ideas as to how I can sync my phone ?

  Read the article

• MacBook Pro screen goes dark

  - by Mike M

  I've had my MacBook Pro for two years now; no problems so far (it has had 3rd party RAM from the get go). Today, I'm copying a particularly large VM from an External disk drive to local MacBook disk. It has about 3GB to go and I take off to do some other things and when I come back my screen is "dark". The computer is still on but I can't see anything. I forced a reboot by holding down the power button, it starts up with the "chimes", but still no screen. I've done this several times. Any ideas? Do you think the hard disk activity caused it to get too hot?

  Read the article

• SQL Server Management Studio - Error connecting to remote DB

  - by Julien Poulin

  All right, here is the deal: I'm connecting to a Windows 2003 Server using VPN. On this server, there is a remote SQL Server 2005 Express engine. I can connect to the database using Visual Studio 2008. What I can't do though, is connect to this same database with SQL Server 2005 Management Studio (Standard). I have checked the connection info a hundred times and still nothing. One thought: do VS ans SSMS use the same sql provider? Note: I'm running Windows 7 RC. I had absolutely no problem using the same config under Vista. This is the error I get when trying to connect with SSMS:

  Read the article

• Software that supports ATA Secure Erase Command

  - by vy32

  We have a lot of drives that need to be sanitized. NIST SP 800-88 recommends software that uses the ATA Secure Erase command. That's apparently the only way to be sure that the drive is properly wiped, due to bad-block remapping and such. I know that this functionality is available in hdparm. The problem with that approach is that it is inconsistent on multiple platforms, occasionally times out, doesn't have error-checking logic, and doesn't check the resulting drive to make sure that it has, in fact, been erased. So a proper program might use hdparm, but hdparm by itself isn't an answer. I'm looking for open source software that implements ATA Secure Erase. Ideally it will be a bootable disk image like DBAN, but it will use the ATA command.

  Read the article

• Why do partially failed/failing switches fail to pass DHCP?

  - by David Mackintosh

  I've noticed this several times: a switch starts to behave oddly. Usually if the switch doesn't fail outright, what tends to get noticed is that DHCP doesn't work. We had a Linksys SRW-224P fail today. Systems which were still connected worked properly, until it came time to renew their DHCP lease. Once the lease expired, they stopped working, but up until then we couldn't detect a failure. This includes PoE VoIP phones -- they work fine until their lease is up, at which point they're done. I've noticed this on the above-mentioned Linksys, three varieties of 3Com, and possibly half a dozen dumb switches. What is it about DHCP that makes it sensitive to failing switches?

  Read the article

• How long do managed gigabit ethernet switches take to boot up?

  - by Warren P

  One critical drawback that I have found in researching managed-switches, and one that I have some past experience with is that anything with "lots" of firmware is going to have lots of issues associated with that firmware. We are in the middle of researching rackmount gigabit switches (48 port). It looks like for 48 ports, our only choice is managed switches (Dell, Cisco/Linksys,HP, etc). What I want to know, that I can not find out much about is the boot-time for various managed switches. If you own one, can you please answer with the model number, and the cold boot time in seconds. I have read online that Linksys (now Cisco) SRW series sometimes take almost 5 minutes before they are fully booted up, and that is an unacceptable cost for us. I particularly want to know about Dell PowerConnect managed switch bootup time (model 3548 and 5448), and would like to confirm the 5-minute boot time on the SRW2048 or similar model, and any HP ProCurve boot up times. The composite of all those figures ought to form an interesting overall performance picture.

  Read the article

< Previous Page | 249 250 251 252 253 254 255 256 257 258 259 260  | Next Page >