Search Results

Search found 6730 results on 270 pages for 'loaded'.

Page 257/270 | < Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >

• How to determine if CNF formula is satisfiable in Scheme?

  - by JJBIRAN

  Program a SCHEME function sat that takes one argument, a CNF formula represented as above. If we had evaluated (define cnf '((a (not b) c) (a (not b) (not d)) (b d))) then evaluating (sat cnf) would return #t, whereas (sat '((a) (not a))) would return (). You should have following two functions to work: (define comp (lambda (lit) ; This function takes a literal as argument and returns the complement literal as the returning value. Examples: (comp 'a) = (not a), and (comp '(not b)) = b. (define consistent (lambda (lit path) This function takes a literal and a list of literals as arguments, and returns #t whenever the complement of the first argument is not a member of the list represented by the 2nd argument; () otherwise. . Now for the sat function. The real searching involves the list of clauses (the CNF formula) and the path that has currently been developed. The sat function should merely invoke the real "workhorse" function, which will have 2 arguments, the current path and the clause list. In the initial call, the current path is of course empty. Hints on sat. (Ignore these at your own risk!) (define sat (lambda (clauselist) ; invoke satpath (define satpath (lambda (path clauselist) ; just returns #t or () ; base cases: ; if we're out of clauses, what then? ; if there are no literals to choose in the 1st clause, what then? ; ; then in general: ; if the 1st literal in the 1st clause is consistent with the ; current path, and if << returns #t, ; then return #t. ; ; if the 1st literal didn't work, then search << ; the CNF formula in which the 1st clause doesn't have that literal Don't make this too hard. My program is a few functions averaging about 2-8 lines each. SCHEME is consise and elegant! The following expressions may help you to test your programs. All but cnf4 are satisfiable. By including them along with your function definitions, the functions themselves are automatically tested and results displayed when the file is loaded. (define cnf1 '((a b c) (c d) (e)) ) (define cnf2 '((a c) (c))) (define cnf3 '((d e) (a))) (define cnf4 '( (a b) (a (not b)) ((not a) b) ((not a) (not b)) ) ) (define cnf5 '((d a) (d b c) ((not a) (not d)) (e (not d)) ((not b)) ((not d) (not e)))) (define cnf6 '((d a) (d b c) ((not a) (not d) (not c)) (e (not c)) ((not b)) ((not d) (not e)))) (write-string "(sat cnf1) ") (write (sat cnf1)) (newline) (write-string "(sat cnf2) ") (write (sat cnf2)) (newline) (write-string "(sat cnf3) ") (write (sat cnf3)) (newline) (write-string "(sat cnf4) ") (write (sat cnf4)) (newline) (write-string "(sat cnf5) ") (write (sat cnf5)) (newline)

  Read the article

• Delphi: EReadError with message ‘Property PageNr does Not Exist’.

  - by lyborko

  Hi, I get SOMETIMES error message: EReadError with message 'Property PageNr does Not exist', when I try to run my own project. I am really desperate, because I see simply nothing what is the cause. The devilish is that it comes up sometimes but often. It concerns of my own component TPage. Here is declaration TPage = class(TCustomControl) // private FPaperHeight, FPaperWidth:Integer; FPaperBrush:TBrush; FPaperSize:TPaperSize; FPaperOrientation:TPaperOrientation; FPDFDocument: TPDFDocument; FPageNr:integer; procedure PaintBasicLayout; procedure PaintInterior; procedure SetPapersize(Value: TPapersize); procedure SetPaperHeight(Value: Integer); procedure SetPaperWidth(Value: Integer); procedure SetPaperOrientation(value:TPaperOrientation); procedure SetPaperBrush(Value:TBrush); procedure SetPageNr(Value:Integer); protected procedure CreateParams(var Params:TCreateParams); override; procedure AdjustClientRect(var Rect: TRect); override; public constructor Create(AOwner: TComponent);override; destructor Destroy;override; // function GetChildOwner:TComponent; override; procedure DrawControl(X,Y :integer; Dx,Dy:Double; Ctrl:TControl;NewCanvas:TCanvas); // procedure GetChildren(Proc:TGetChildProc; Root:TComponent); override; procedure Loaded; override; procedure MouseDown(Button: TMouseButton; Shift: TShiftState; X, Y: Integer); override; procedure Paint; override; procedure PrintOnCanvas(X,Y:integer; rX,rY:Double; ACanvas:TCanvas); procedure PrintOnPDFCanvas(X,Y:integer); procedure PrintOnPrinterCanvas(X,Y:integer); procedure Resize; override; procedure SetPrintKind(APrintKind:TPrintKind; APrintGroupindex:Integer); published property PageNr:integer read FPageNr write SetPageNr; property PaperBrush: TBrush read FPaperBrush write SetPaperBrush; property PaperHeight: integer read FPaperHeight write SetPaperHeight; property PaperWidth: integer read FPaperWidth write SetPaperWidth; property PaperSize: TPaperSize read FPaperSize write SetPaperSize; property PaperOrientation:TPaperOrientation read FPaperOrientation write SetPaperOrientation; property PDFDocument:TPDFDocument read FPDFDocument write FPDFDocument; property TabOrder; end; I thoroughly read the similar topic depicted here: Delphi: EReadError with message 'Property Persistence does Not exist' But here it is my own source code. No third party. Interesting: when I delete PageNr property in my dfm file (unit1.dfm), then pops up : EReadError with message 'Property PaperHeight does Not exist'. when I delete PaperHeight then it will claim PaperWidth and so on... Here is piece of dfm file: object pg1: TPage Left = 128 Top = 144 Width = 798 Height = 1127 PageNr = 0 PaperHeight = 1123 PaperWidth = 794 PaperSize = psA4 PaperOrientation = poPortrait TabOrder = 0 object bscshp4: TBasicShape Left = 112 Top = 64 Width = 105 Height = 105 PrintKind = pkNormal PrintGroupIndex = 0 Zooming = 100 Transparent = False Repeating = False PageRepeatOffset = 1 ShapeStyle = ssVertical LinePosition = 2 end object bscshp5: TBasicShape Left = 288 Top = 24 Width = 105 Height = 105 PrintKind = pkNormal PrintGroupIndex = 0 Zooming = 100 Transparent = False What the hell happens ??????? I have never seen that. I compiled the unit several times... Encoutered no problem. Maybe the cause is beyond this. I feel completely powerless.

  Read the article

• Find out when all processes in (void) is done?

  - by Emil

  Hey. I need to know how you can find out when all processes (loaded) from a - (void) are done, if it's possible. Why? I'm loading in data for a UITableView, and I need to know when a Loading... view can be replaced with the UITableView, and when I can start creating the cells. This is my code: - (void) reloadData { NSAutoreleasePool *releasePool = [[NSAutoreleasePool alloc] init]; NSLog(@"Reloading data."); NSURL *urlPosts = [NSURL URLWithString:[NSString stringWithFormat:@"%@", URL]]; NSError *lookupError = nil; NSString *data = [[NSString alloc] initWithContentsOfURL:urlPosts encoding:NSUTF8StringEncoding error:&lookupError]; postsData = [data componentsSeparatedByString:@"~"]; [data release], data = nil; urlPosts = nil; self.numberOfPosts = [[postsData objectAtIndex:0] intValue]; self.postsArrayID = [[postsData objectAtIndex:1] componentsSeparatedByString:@"#"]; self.postsArrayDate = [[postsData objectAtIndex:2] componentsSeparatedByString:@"#"]; self.postsArrayTitle = [[postsData objectAtIndex:3] componentsSeparatedByString:@"#"]; self.postsArrayComments = [[postsData objectAtIndex:4] componentsSeparatedByString:@"#"]; self.postsArrayImgSrc = [[postsData objectAtIndex:5] componentsSeparatedByString:@"#"]; NSMutableArray *writeToPlist = [NSMutableArray array]; NSMutableArray *writeToNoImagePlist = [NSMutableArray array]; NSMutableArray *imagesStored = [NSMutableArray arrayWithContentsOfFile:[rootPath stringByAppendingPathComponent:@"imagesStored.plist"]]; int loop = 0; for (NSString *postID in postsArrayID) { if ([imagesStored containsObject:[NSString stringWithFormat:@"%@.png", postID]]){ NSLog(@"Allready stored, jump to next. ID: %@", postID); continue; } NSLog(@"%@.png", postID); NSData *imageData = [NSData dataWithContentsOfURL:[NSURL URLWithString:[postsArrayImgSrc objectAtIndex:loop]]]; // If image contains anything, set cellImage to image. If image is empty, try one more time or use noImage.png, set in IB if (imageData == nil){ NSLog(@"imageData is empty before trying .jpeg"); // If image == nil, try to replace .jpg with .jpeg, and if that worked, set cellImage to that image. If that is also nil, use noImage.png, set in IB. imageData = [NSData dataWithContentsOfURL:[NSURL URLWithString:[[postsArrayImgSrc objectAtIndex:loop] stringByReplacingOccurrencesOfString:@".jpg" withString:@".jpeg"]]]; } if (imageData != nil){ NSLog(@"imageData is NOT empty when creating file"); [fileManager createFileAtPath:[rootPath stringByAppendingPathComponent:[NSString stringWithFormat:@"images/%@.png", postID]] contents:imageData attributes:nil]; [writeToPlist addObject:[NSString stringWithFormat:@"%@.png", postID]]; } else { [writeToNoImagePlist addObject:[NSString stringWithFormat:@"%@", postID]]; } imageData = nil; loop++; NSLog(@"imagePlist: %@\nnoImagePlist: %@", writeToPlist, writeToNoImagePlist); } NSMutableArray *writeToAllPlist = [NSMutableArray arrayWithArray:writeToPlist]; [writeToPlist addObjectsFromArray:[NSArray arrayWithContentsOfFile:nowPlist]]; [writeToAllPlist addObjectsFromArray:[NSArray arrayWithContentsOfFile:[rootPath stringByAppendingPathComponent:@"imagesStored.plist"]]]; [writeToNoImagePlist addObjectsFromArray:[NSArray arrayWithContentsOfFile:[rootPath stringByAppendingPathComponent:@"noImage.plist"]]]; [writeToPlist writeToFile:nowPlist atomically:YES]; [writeToAllPlist writeToFile:[rootPath stringByAppendingPathComponent:@"imagesStored.plist"] atomically:YES]; [writeToNoImagePlist writeToFile:[rootPath stringByAppendingPathComponent:@"noImage.plist"] atomically:YES]; [releasePool release]; }

  Read the article

• Basic C question, concerning memory allocation and value assignment

  - by VHristov

  Hi there, I have recently started working on my master thesis in C that I haven't used in quite a long time. Being used to Java, I'm now facing all kinds of problems all the time. I hope someone can help me with the following one, since I've been struggling with it for the past two days. So I have a really basic model of a database: tables, tuples, attributes and I'm trying to load some data into this structure. Following are the definitions: typedef struct attribute { int type; char * name; void * value; } attribute; typedef struct tuple { int tuple_id; int attribute_count; attribute * attributes; } tuple; typedef struct table { char * name; int row_count; tuple * tuples; } table; Data is coming from a file with inserts (generated for the Wisconsin benchmark), which I'm parsing. I have only integer or string values. A sample row would look like: insert into table values (9205, 541, 1, 1, 5, 5, 5, 5, 0, 1, 9205, 10, 11, 'HHHHHHH', 'HHHHHHH', 'HHHHHHH'); I've "managed" to load and parse the data and also to assign it. However, the assignment bit is buggy, since all values point to the same memory location, i.e. all rows look identical after I've loaded the data. Here is what I do: char value[10]; // assuming no value is longer than 10 chars int i, j, k; table * data = (table*) malloc(sizeof(data)); data->name = "table"; data->row_count = number_of_lines; data->tuples = (tuple*) malloc(number_of_lines*sizeof(tuple)); tuple* current_tuple; for(i=0; i<number_of_lines; i++) { current_tuple = &data->tuples[i]; current_tuple->tuple_id = i; current_tuple->attribute_count = 16; // static in our system current_tuple->attributes = (attribute*) malloc(16*sizeof(attribute)); for(k = 0; k < 16; k++) { current_tuple->attributes[k].name = attribute_names[k]; // for int values: current_tuple->attributes[k].type = DB_ATT_TYPE_INT; // write data into value-field int v = atoi(value); current_tuple->attributes[k].value = &v; // for string values: current_tuple->attributes[k].type = DB_ATT_TYPE_STRING; current_tuple->attributes[k].value = value; } // ... } While I am perfectly aware, why this is not working, I can't figure out how to get it working. I've tried following things, none of which worked: memcpy(current_tuple->attributes[k].value, &v, sizeof(int)); This results in a bad access error. Same for the following code (since I'm not quite sure which one would be the correct usage): memcpy(current_tuple->attributes[k].value, &v, 1); Not even sure if memcpy is what I need here... Also I've tried allocating memory, by doing something like: current_tuple->attributes[k].value = (int *) malloc(sizeof(int)); only to get "malloc: * error for object 0x100108e98: incorrect checksum for freed object - object was probably modified after being freed." As far as I understand this error, memory has already been allocated for this object, but I don't see where this happened. Doesn't the malloc(sizeof(attribute)) only allocate the memory needed to store an integer and two pointers (i.e. not the memory those pointers point to)? Any help would be greatly appreciated! Regards, Vassil

  Read the article

• How do I make java wait for boolean to run funciton

  - by TWeeKeD

  I'm sure this is pretty simple but I can't figure out and it sucks I'm up on suck on (what should be) an easy step. ok. I have a method that runs one function that give a response. this method actually handles the uploading of the file so o it takes a second to give a response. I need this response in the following method. sendPicMsg needs to complete and then forward it's response to sendMessage. Please help. b1.setOnClickListener(new View.OnClickListener() { public void onClick(View v) { if(!uploadMsgPic.equalsIgnoreCase("")){ Log.v("response","Pic in storage"); sendPicMsg(); sendMessage(); }else{ sendMessage(); } 1st Method public void sendPicMsg(){ Log.v("response", "sendPicMsg Loaded"); if(!uploadMsgPic.equalsIgnoreCase("")){ final SharedPreferences preferences = this.getActivity().getSharedPreferences("MyPreferences", getActivity().MODE_PRIVATE); AsyncHttpClient client3 = new AsyncHttpClient(); RequestParams params3 = new RequestParams(); File file = new File(uploadMsgPic); try { File f = new File(uploadMsgPic.replace(".", "1.")); f.createNewFile(); //Convert bitmap to byte array Bitmap bitmap = decodeFile(file,400); ByteArrayOutputStream bos = new ByteArrayOutputStream(); bitmap.compress(CompressFormat.PNG, 0 /*ignored for PNG*/, bos); byte[] bitmapdata = bos.toByteArray(); //write the bytes in file FileOutputStream fos = new FileOutputStream(f); fos.write(bitmapdata); params3.put("file", f); } catch (FileNotFoundException e) { // TODO Auto-generated catch block e.printStackTrace(); } catch (IOException e) { // TODO Auto-generated catch block e.printStackTrace(); } params3.put("email", preferences.getString("loggedin_user", "")); params3.put("webversion", "1"); client3.post("http://peekatu.com/apiweb/msgPic_upload.php",params3, new AsyncHttpResponseHandler() { @Override public void onSuccess(String response) { Log.v("response", "Upload Complete"); refreshChat(); //responseString = response; Log.v("response","msgPic has been uploaded"+response); //parseChatMessages(response); response=picurl; uploadMsgPic = ""; if(picurl!=null){ Log.v("response","picurl is set"); } if(picurl==null){ Log.v("response", "picurl no ready"); }; } }); sendMessage(); } } 2nd Method public void sendMessage(){ final SharedPreferences preferences = this.getActivity().getSharedPreferences("MyPreferences", getActivity().MODE_PRIVATE); if(preferences.getString("Username", "").length()<=0){ editText1.setText(""); Toast.makeText(this.getActivity(), "Please Login to send messages.", 2); return; } AsyncHttpClient client = new AsyncHttpClient(); RequestParams params = new RequestParams(); if(type.equalsIgnoreCase("3")){ params.put("toid",user); params.put("action", "sendprivate"); }else{ params.put("room", preferences.getString("selected_room", "Adult Lobby")); params.put("action", "insert"); } Log.v("response", "Sending message "+editText1.getText().toString()); params.put("message",editText1.getText().toString() ); params.put("media", picurl); params.put("email", preferences.getString("loggedin_user", "")); params.put("webversion", "1"); client.post("http://peekatu.com/apiweb/messagetest.php",params, new AsyncHttpResponseHandler() { @Override public void onSuccess(String response) { refreshChat(); //responseString = response; Log.v("response", response); //parseChatMessages(response); if(picurl!=null) Log.v("response", picurl); } }); editText1.setText(""); lv.setSelection(adapter.getCount() - 1); }

  Read the article

• Safely defining variables for public callback functions in javascript

  - by djreed

  I am working with the YouTube iFrame API to embed a number of videos on a page. Documentation here: https://developers.google.com/youtube/iframe_api_reference#Requirements In summary, you load the API asynchronously using the following snippet: var tag = document.createElement('script'); tag.src = "http://www.youtube.com/player_api"; var firstScriptTag = document.getElementsByTagName('script')[0]; firstScriptTag.parentNode.insertBefore(tag, firstScriptTag); Once loaded, the API fires the predefined callback function onYouTubePlayerAPIReady. For additional context: I am defining a library file for this in Google Closure. I am providing a namespace: goog.provide('yt.video'); I then use goog.exportSymbol so that the API can find the function. That all works fine. My challenge is that I would like to pass 2 variables to the callback function. Is there any way to do this without defining these 2 variables in the context of the window object? goog.provide('yt.video'); goog.require('goog.dom'); yt.video = function(videos, locales) { this.videos = videos; this.captionLocales = locales; this.init(); }; yt.video.prototype.init = function() { var tag = document.createElement('script'); tag.src = "http://www.youtube.com/player_api"; var firstScriptTag = document.getElementsByTagName('script')[0]; firstScriptTag.parentNode.insertBefore(tag, firstScriptTag); }; /* * Callback function fired when YT API is ready * This is exported using goog.exportSymbol in another file and * is being fired by the API properly. */ yt.video.prototype.onPlayerReady = function(videos, locales) { window.console.log('this :' + this); //logs window window.console.log('this.videos : ' + this.videos); //logs undefined /* * Video settings from Django variable */ for(i=0; i<this.videos.length; i++) { var playerEvents = {}; var embedVars = {}; var el = this.videos[i].el; var playerVid = this.videos[i].vid; var playerWidth = this.videos[i].width; var playerHeight = this.videos[i].height; var captionLocales = this.videos[i].locales; if(this.videos[i].playerVars) var embedVars = this.videos[i].playerVars; } if(this.videos[i].events) { var playerEvents = this.videos[i].events; } /* * Show captions by default */ if(goog.array.indexOf(captionLocales, 'es') >= 0) { embedVars.cc_load_policy = 1; }; new YT.Player(el, { height: playerHeight, width: playerWidth, videoId: playerVid, events: playerEvents, playerVars: embedVars }); }; }; To intialize this, I am currently using the following within a self-executing anonymous function: var videos = [ {"vid": "video_id", "el": "player-1", "width": 640, "height": 390, "locales": ["es", "fr"], "events": {"onStateChange": stateChanged}}, {"vid": "video_id", "el": "player-2", "locales": ["es", "fr"], "width": 640, "height": 390} ]; var locales = ['es']; var videoTemplate = new yt.video(videos, locales);

  Read the article

• mapping rect in small image to larger image (in order to do a copyPixels operation)

  - by skinnyTOD

  Hi all - this is (I think) a relatively simple math question but I've spent a day banging my head against it and have only the dents and no solution... I'm coding in actionscript 3 - the functionality is: large image loaded at runtime. The bitmapData is stored and a smaller version is created to display on the available screen area (I may end up just scaling the large image since it is in memory anyway). The user can create a rectangle hotspot on the smaller image (the functionality will be more complex: multiple rects with transparency: example a donut shape with hole, etc) 3 When the user clicks on the hotspot, the rect of the hotspot is mapped to the larger image and a new bitmap "callout" is created, using the larger bitmap data. The reason for this is so the "callout" will be better quality than just scaling up the area of the hotspot. The image below shows where I am at so far- the blue rect is the clicked hotspot. In the upper left is the "callout" - copied from the larger image. I have the aspect ratio right but I am not mapping to the larger image correctly. Ugly code below... Sorry this post is so long - I just figured I ought to provide as much info as possible. Thanks for any tips! --trace of my data values *source BitmapDada 1152 864 scaled to rect 800 600 scaled BitmapData 800 600 selection BitmapData 58 56 scaled selection 83 80 ratio 1.44 before (x=544, y=237, w=58, h=56) (x=544, y=237, w=225.04, h=217.28) * Image here: http://i795.photobucket.com/albums/yy237/skinnyTOD/exampleST.jpg public function onExpandCallout(event:MouseEvent):void{ if (maskBitmapData.getPixel32(event.localX, event.localY) != 0){ var maskClone:BitmapData = maskBitmapData.clone(); //amount to scale callout - this will vary/can be changed by user var scale:Number =150 //scale percentage var normalizedScale :Number = scale/=100; var w:Number = maskBitmapData.width*normalizedScale; var h:Number = maskBitmapData.height*normalizedScale; var ratio:Number = (sourceBD.width /targetRect.width); //creat bmpd of the scaled size to copy source into var scaledBitmapData:BitmapData = new BitmapData(maskBitmapData.width * ratio, maskBitmapData.height * ratio, true, 0xFFFFFFFF); trace("source BitmapDada " + sourceBD.width, sourceBD.height); trace("scaled to rect " + targetRect.width, targetRect.height); trace("scaled BitmapData", bkgnImageSprite.width, bkgnImageSprite.height); trace("selection BitmapData", maskBitmapData.width, maskBitmapData.height); trace("scaled selection", scaledBitmapData.width, scaledBitmapData.height); trace("ratio", ratio); var scaledBitmap:Bitmap = new Bitmap(scaledBitmapData); var scaleW:Number = sourceBD.width / scaledBitmapData.width; var scaleH:Number = sourceBD.height / scaledBitmapData.height; var scaleMatrix:Matrix = new Matrix(); scaleMatrix.scale(ratio,ratio); var sRect:Rectangle = maskSprite.getBounds(bkgnImageSprite); var sR:Rectangle = sRect.clone(); var ss:Sprite = new Sprite(); ss.graphics.lineStyle(8, 0x0000FF); //ss.graphics.beginFill(0x000000, 1); ss.graphics.drawRect(sRect.x, sRect.y, sRect.width, sRect.height); //ss.graphics.endFill(); this.addChild(ss); trace("before " + sRect); w = uint(sRect.width * scaleW); h = uint(sRect.height * scaleH); sRect.inflate(maskBitmapData.width * ratio, maskBitmapData.height * ratio); sRect.offset(maskBitmapData.width * ratio, maskBitmapData.height * ratio); trace(sRect); scaledBitmapData.copyPixels(sourceBD, sRect, new Point()); addChild(scaledBitmap); scaledBitmap.x = offsetPt.x; scaledBitmap.y = offsetPt.y; } }

  Read the article

• Solution: Testing Web Services with MSTest on Team Build

  - by Martin Hinshelwood

  Guess what. About 20 minutes after I fixed the build, Allan broke it again! Update: 4th March 2010 – After having huge problems getting this working I read Billy Wang’s post which showed me the light. The problem here is that even though the test passes locally it will not during an Automated Build. When you send your tests to the build server it does not understand that you want to spin up the web site and run tests against that! When you run the test in Visual Studio it spins up the web site anyway, but would you expect your test to pass if you told the website not to spin up? Of course not. So, when you send the code to the build server you need to tell it what to spin up. First, the best way to get the parameters you need is to right click on the method you want to test and select “Create Unit Test”. This will detect wither you are running in IIS or ASP.NET Development Server or None, and create the relevant tags. Figure: Right clicking on “SaveDefaultProjectFile” will produce a context menu with “Create Unit tests…” on it. If you use this option it will AutoDetect most of the Attributes that are required. /// <summary> ///A test for SSW.SQLDeploy.SilverlightUI.Web.Services.IProfileService.SaveDefaultProjectFile ///</summary> // TODO: Ensure that the UrlToTest attribute specifies a URL to an ASP.NET page (for example, // http://.../Default.aspx). This is necessary for the unit test to be executed on the web server, // whether you are testing a page, web service, or a WCF service. [TestMethod()] [HostType("ASP.NET")] [AspNetDevelopmentServerHost("D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web", "/")] [UrlToTest("http://localhost:3100/")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] public void SaveDefaultProjectFileTest() { IProfileService target = new ProfileService(); // TODO: Initialize to an appropriate value string strComputerName = string.Empty; // TODO: Initialize to an appropriate value bool expected = false; // TODO: Initialize to an appropriate value bool actual; actual = target.SaveDefaultProjectFile(strComputerName); Assert.AreEqual(expected, actual); Assert.Inconclusive("Verify the correctness of this test method."); } Figure: Auto created code that shows the attributes required to run correctly in IIS or in this case ASP.NET Development Server If you are a purist and don’t like creating unit tests like this then you just need to add the three attributes manually. HostType – This attribute specified what host to use. Its an extensibility point, so you could write your own. Or you could just use “ASP.NET”. UrlToTest – This specifies the start URL. For most tests it does not matter which page you call, as long as it is a valid page otherwise your test may not run on the server, but may pass anyway. AspNetDevelopmentServerHost – This is a nasty one, it is only used if you are using ASP.NET Development Host and is unnecessary if you are using IIS. This sets the host settings and the first value MUST be the physical path to the root of your web application. OK, so all that was rubbish and I could not get anything working using the MSDN documentation. Google provided very little help until I ran into Billy Wang’s post  and I heard that heavenly music that all developers hear when understanding dawns that what they have been doing up until now is just plain stupid. I am sure that the above will work when I am doing Web Unit Tests, but there is a much easier way when doing web services. You need to add the AspNetDevelopmentServer attribute to your code. This will tell MSTest to spin up an ASP.NET Development server to host the service. Specify the path to the web application you want to use. [AspNetDevelopmentServer("WebApp1", "D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: This AspNetDevelopmentServer will make sure that the specified web application is launched. Now we can run the test and have it pass, but if the dynamically assigned ASP.NET Development server port changes what happens to the details in your app.config that was generated when creating a reference to the web service? Well, it would be wrong and the test would fail. This is where Billy’s helper method comes in. Once you have created an instance of your service call, and it has loaded the config, but before you make any calls to it you need to go in and dynamically set the Endpoint address to the same address as your dynamically hosted Web Application. using System; using System.Collections.Generic; using System.Linq; using System.Text; using Microsoft.VisualStudio.TestTools.UnitTesting; using System.Reflection; using System.ServiceModel.Description; using System.ServiceModel; namespace SSW.SQLDeploy.Test { class WcfWebServiceHelper { public static bool TryUrlRedirection(object client, TestContext context, string identifier) { bool result = true; try { PropertyInfo property = client.GetType().GetProperty("Endpoint"); string webServer = context.Properties[string.Format("AspNetDevelopmentServer.{0}", identifier)].ToString(); Uri webServerUri = new Uri(webServer); ServiceEndpoint endpoint = (ServiceEndpoint)property.GetValue(client, null); EndpointAddressBuilder builder = new EndpointAddressBuilder(endpoint.Address); builder.Uri = new Uri(endpoint.Address.Uri.OriginalString.Replace(endpoint.Address.Uri.Authority, webServerUri.Authority)); endpoint.Address = builder.ToEndpointAddress(); } catch (Exception e) { context.WriteLine(e.Message); result = false; } return result; } } } Figure: This fixes a problem with the URL in your web.config not being the same as the dynamically hosted ASP.NET Development server port. We can now add a call to this method after we created the Proxy object and change the Endpoint for the Service to the correct one. This process is wrapped in an assert as if it fails there is no point in continuing. [AspNetDevelopmentServer("WebApp1", D:\\Workspaces\\SSW\\SSW\\SqlDeploy\\DEV\\Main\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); Assert.IsTrue(WcfWebServiceHelper.TryUrlRedirection(target, TestContext, "WebApp1")); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: Editing the Endpoint from the app.config on the fly to match the dynamically hosted ASP.NET Development Server URL and port is now easy. As you can imagine AspNetDevelopmentServer poses some problems of you have multiple developers. What are the chances of everyone using the same location to store the source? What about if you are using a build server, how do you tell MSTest where to look for the files? To the rescue is a property called" “%PathToWebRoot%” which is always right on the build server. It will always point to your build drop folder for your solutions web sites. Which will be “\\tfs.ssw.com.au\BuildDrop\[BuildName]\Debug\_PrecompiledWeb\” or whatever your build drop location is. So lets change the code above to add this. [AspNetDevelopmentServer("WebApp1", "%PathToWebRoot%\\SSW.SQLDeploy.SilverlightUI.Web")] [DeploymentItem("SSW.SQLDeploy.SilverlightUI.Web.dll")] [TestMethod] public void ProfileService_Integration_SaveDefaultProjectFile_Returns_True() { ProfileServiceClient target = new ProfileServiceClient(); Assert.IsTrue(WcfWebServiceHelper.TryUrlRedirection(target, TestContext, "WebApp1")); bool isTrue = target.SaveDefaultProjectFile("Mav"); Assert.AreEqual(true, isTrue); } Figure: Adding %PathToWebRoot% to the AspNetDevelopmentServer path makes it work everywhere. Now we have another problem… this will ONLY run on the build server and will fail locally as %PathToWebRoot%’s default value is “C:\Users\[profile]\Documents\Visual Studio 2010\Projects”. Well this sucks… How do we get the test to run on any build server and any developer laptop. Open “Tools | Options | Test Tools | Test Execution” in Visual Studio and you will see a field called “Web application root directory”. This is where you override that default above. Figure: You can override the default website location for tests. In my case I would put in “D:\Workspaces\SSW\SSW\SqlDeploy\DEV\Main” and all the developers working with this branch would put in the folder that they have mapped. Can you see a problem? What is I create a “$/SSW/SqlDeploy/DEV/34567” branch from Main and I want to run tests in there. Well… I would have to change the value above. This is not ideal, but as you can put your projects anywhere on a computer, it has to be done. Conclusion Although this looks convoluted and complicated there are real problems being solved here that mean that you have a test ANYWHERE solution. Any build server, any Developer workstation. Resources: http://billwg.blogspot.com/2009/06/testing-wcf-web-services.html http://tough-to-find.blogspot.com/2008/04/testing-asmx-web-services-in-visual.html http://msdn.microsoft.com/en-us/library/ms243399(VS.100).aspx http://blogs.msdn.com/dscruggs/archive/2008/09/29/web-tests-unit-tests-the-asp-net-development-server-and-code-coverage.aspx http://www.5z5.com/News/?543f8bc8b36b174f Technorati Tags: VS2010,MSTest,Team Build 2010,Team Build,Visual Studio,Visual Studio 2010,Visual Studio ALM,Team Test,Team Test 2010

  Read the article

• Real Excel Templates I

  - by Tim Dexter

  As promised, I'm starting to document the new Excel templates that I teased you all with a few weeks back. Leslie is buried in 11g documentation and will not get to officially documenting the templates for a while. I'll do my best to be professional and not ramble on about this and that, although the weather here has finally turned and its 'scorchio' here in Colorado today. Maybe our stand of Aspen will finally come into leaf ... but I digress. Preamble These templates are not actually that new, I helped in a small way to develop them a few years back with Excel 'meistress' Shirley for a company that was trying to use the Report Manager(RR) Excel FSG outputs under EBS 12. The functionality they needed was just not there in the RR FSG templates, the templates are actually XSL that is created from the the RR Excel template builder and fed to BIP for processing. Think of Excel from our RTF templates and you'll be there ie not really Excel but HTML masquerading as Excel. Although still under controlled release in EBS they have now made their way to the standlone release and are willing to share their Excel goodness. You get everything you have with hte Excel Analyzer Excel templates plus so much more. Therein lies a question, what will happen to the Analyzer templates? My understanding is that both will come together into a single Excel template format some time in the post-11g release world. The new XLSX format for Exce 2007/10 is also in the mix too so watch this space. What more do these templates offer? Well, you can structure data in the Excel output. Similar to RTF templates you can create sheets of data that have master-detail n relationships. Although the analyzer templates can do this, you have to get into macros whereas BIP will do this all for you. You can also use native XSL functions in your data to manipulate it prior to rendering. BP functions are not currently supported. The most impressive, for me at least, is the sheet 'bursting'. You can split your hierarchical data across multiple sheets and dynamically name those sheets. Finally, you of course, still get all the native Excel functionality. Pre-reqs You must be on 10.1.3.4.1 plus the latest rollup patch, 9546699. You can patch upa BIP instance running with OBIEE, no problem You need Excel 2000 or above to build the templates Some patience - there is no Excel template builder for these new templates. So its all going to have to be done by hand. Its not that tough but can get a little 'fiddly'. You can not test the template from Excel , it has to be deployed and then run. Limitations The new templates are definitely superior to the Analyzer templates but there are a few limitations. Re-grouping is not supported. You can only follow a data hierarchy not bend it to your will unless you want to get into macros. No support for BIP functions. The templates support native XSL functions only. No template builder Getting Started The templates make the use of named cells and groups of cells to allow BIP to find the insertion point for data points. It also uses a hidden sheet to store calculation mappings from named cells to XML data elements. To start with, in the great BIP tradition, we need some sample XML data. Becasue I wanted to show the master-detail output we need some hierarchical data. If you have not yet gotten into the data templates, now is a good time, I wrote a post a while back starting from the simple to more complex. They generate ideal data sets for these templates. Im working with the following data set: <EMPLOYEES> <LIST_G_DEPT> <G_DEPT> <DEPARTMENT_ID>10</DEPARTMENT_ID> <DEPARTMENT_NAME>Administration</DEPARTMENT_NAME> <LIST_G_EMP> <G_EMP> <EMPLOYEE_ID>200</EMPLOYEE_ID> <EMP_NAME>Jennifer Whalen</EMP_NAME> <EMAIL>JWHALEN</EMAIL> <PHONE_NUMBER>515.123.4444</PHONE_NUMBER> <HIRE_DATE>1987-09-17T00:00:00.000-06:00</HIRE_DATE> <SALARY>4400</SALARY> </G_EMP> </LIST_G_EMP> <TOTAL_EMPS>1</TOTAL_EMPS> <TOTAL_SALARY>4400</TOTAL_SALARY> <AVG_SALARY>4400</AVG_SALARY> <MAX_SALARY>4400</MAX_SALARY> <MIN_SALARY>4400</MIN_SALARY> </G_DEPT> ... <LIST_G_DEPT> <EMPLOYEES> Simple enough to follow and bread and butter stuff for an RTF template. Building the Template For an Excel template we need to start by thinking about how we want to render the data. Come up with a sample output in Excel. Its all dummy data, nothing marked up yet with one row of data for each level. I have the department name and then a repeating row for the employees. You can apply Excel formatting to the layout. The total is going to be derived from a data element. We'll get to Excel functions later. Marking Up Cells Next we need to start marking up the cells with custom names to map them to data elements. The cell names need to follow a specific format: For data grouping, XDO_GROUP_?group_name? For data elements, XDO_?element_name? Notice the question mark delimter, the group_name and element_name are case sensitive. The next step is to find how to name cells; the easiest method is to highlight the cell and then type in the name. You can also find the Name Manager dialog. I use 2007 and its available on the ribbon under the Formulas section Go thorugh the process of naming all the cells for the element values you have. Using my data set from above.You should end up with something like this in your 'Name Manager' dialog. You can update any mistakes you might have made through this dialog. Creating Groups In the image above you can see there are a couple of named group cells. To create these its a simple case of highlighting the cells that make up the group and then naming them. For the EMP group, highlight the employee row and then type in the name, XDO_GROUP?G_EMP? Notice the 10,000 total is outside of the G_EMP group. Its actually named, XDO_?TOTAL_SALARY?, a query calculated value. For the department group, we need to include the department name cell and the sub EMP grouping and name it, XDO_GROUP?G_DEPT? Notice, the 10,000 total is included in the G_DEPT group. This will ensure it repeats at the department level. Lastly, we do need to include a special sheet in the workbook. We will not have anything meaningful in there for now, but it needs to be present. Create a new sheet and name it XDO_METADATA. The name is important as the BIP rendering engine will looking for it. For our current example we do not need anything other than the required stuff in our XDO_METADATA sheet but, it must be present. Easy enough to hide it. Here's what I have: The only cell that is important is the 'Data Constraints:' cell. The rest is optional. To save curious users getting distracted, hide the metadata sheet. Deploying & Running Templates We should now have a usable Excel template. Loading it into a report is easy enough using the browser UI, just like an RTF template. Set the template type to Excel. You will now be able to run the report and hopefully get something like this. You will not get the red highlighting, thats just some conditional formatting I added to the template using Excel functionality. Your dates are probably going to look raw too. I got around this for now using an Excel function on the cell: =--REPLACE(SUBSTITUTE(E8,"T"," "),LEN(E8)-6,6,"") Google to the rescue on that one. Try some other stuff out. To avoid constantly loading the template through the UI. If you have BIP running locally or you can access the reports repository, once you have loaded the template the first time. Just save the template directly into the report folder. I have put together a sample report using a sample data set, available here. Just drop the xml data file, EmpbyDeptExcelData.xml into 'demo files' folder and you should be good to go. Thats the basics, next we'll start using some XSL functions in the template and move onto the 'bursting' across sheets.

  Read the article

• jQuery Templates and Data Linking (and Microsoft contributing to jQuery)

  - by ScottGu

  The jQuery library has a passionate community of developers, and it is now the most widely used JavaScript library on the web today. Two years ago I announced that Microsoft would begin offering product support for jQuery, and that we’d be including it in new versions of Visual Studio going forward. By default, when you create new ASP.NET Web Forms and ASP.NET MVC projects with VS 2010 you’ll find jQuery automatically added to your project. A few weeks ago during my second keynote at the MIX 2010 conference I announced that Microsoft would also begin contributing to the jQuery project.  During the talk, John Resig -- the creator of the jQuery library and leader of the jQuery developer team – talked a little about our participation and discussed an early prototype of a new client templating API for jQuery. In this blog post, I’m going to talk a little about how my team is starting to contribute to the jQuery project, and discuss some of the specific features that we are working on such as client-side templating and data linking (data-binding). Contributing to jQuery jQuery has a fantastic developer community, and a very open way to propose suggestions and make contributions.  Microsoft is following the same process to contribute to jQuery as any other member of the community. As an example, when working with the jQuery community to improve support for templating to jQuery my team followed the following steps: We created a proposal for templating and posted the proposal to the jQuery developer forum (http://forum.jquery.com/topic/jquery-templates-proposal and http://forum.jquery.com/topic/templating-syntax ). After receiving feedback on the forums, the jQuery team created a prototype for templating and posted the prototype at the Github code repository (http://github.com/jquery/jquery-tmpl ). We iterated on the prototype, creating a new fork on Github of the templating prototype, to suggest design improvements. Several other members of the community also provided design feedback by forking the templating code. There has been an amazing amount of participation by the jQuery community in response to the original templating proposal (over 100 posts in the jQuery forum), and the design of the templating proposal has evolved significantly based on community feedback. The jQuery team is the ultimate determiner on what happens with the templating proposal – they might include it in jQuery core, or make it an official plugin, or reject it entirely.  My team is excited to be able to participate in the open source process, and make suggestions and contributions the same way as any other member of the community. jQuery Template Support Client-side templates enable jQuery developers to easily generate and render HTML UI on the client.  Templates support a simple syntax that enables either developers or designers to declaratively specify the HTML they want to generate.  Developers can then programmatically invoke the templates on the client, and pass JavaScript objects to them to make the content rendered completely data driven.  These JavaScript objects can optionally be based on data retrieved from a server. Because the jQuery templating proposal is still evolving in response to community feedback, the final version might look very different than the version below. This blog post gives you a sense of how you can try out and use templating as it exists today (you can download the prototype by the jQuery core team at http://github.com/jquery/jquery-tmpl or the latest submission from my team at http://github.com/nje/jquery-tmpl).  jQuery Client Templates You create client-side jQuery templates by embedding content within a <script type="text/html"> tag.  For example, the HTML below contains a <div> template container, as well as a client-side jQuery “contactTemplate” template (within the <script type="text/html"> element) that can be used to dynamically display a list of contacts: The {{= name }} and {{= phone }} expressions are used within the contact template above to display the names and phone numbers of “contact” objects passed to the template. We can use the template to display either an array of JavaScript objects or a single object. The JavaScript code below demonstrates how you can render a JavaScript array of “contact” object using the above template. The render() method renders the data into a string and appends the string to the “contactContainer” DIV element: When the page is loaded, the list of contacts is rendered by the template.  All of this template rendering is happening on the client-side within the browser:   Templating Commands and Conditional Display Logic The current templating proposal supports a small set of template commands - including if, else, and each statements. The number of template commands was deliberately kept small to encourage people to place more complicated logic outside of their templates. Even this small set of template commands is very useful though. Imagine, for example, that each contact can have zero or more phone numbers. The contacts could be represented by the JavaScript array below: The template below demonstrates how you can use the if and each template commands to conditionally display and loop the phone numbers for each contact: If a contact has one or more phone numbers then each of the phone numbers is displayed by iterating through the phone numbers with the each template command: The jQuery team designed the template commands so that they are extensible. If you have a need for a new template command then you can easily add new template commands to the default set of commands. Support for Client Data-Linking The ASP.NET team recently submitted another proposal and prototype to the jQuery forums (http://forum.jquery.com/topic/proposal-for-adding-data-linking-to-jquery). This proposal describes a new feature named data linking. Data Linking enables you to link a property of one object to a property of another object - so that when one property changes the other property changes.  Data linking enables you to easily keep your UI and data objects synchronized within a page. If you are familiar with the concept of data-binding then you will be familiar with data linking (in the proposal, we call the feature data linking because jQuery already includes a bind() method that has nothing to do with data-binding). Imagine, for example, that you have a page with the following HTML <input> elements: The following JavaScript code links the two INPUT elements above to the properties of a JavaScript “contact” object that has a “name” and “phone” property: When you execute this code, the value of the first INPUT element (#name) is set to the value of the contact name property, and the value of the second INPUT element (#phone) is set to the value of the contact phone property. The properties of the contact object and the properties of the INPUT elements are also linked – so that changes to one are also reflected in the other. Because the contact object is linked to the INPUT element, when you request the page, the values of the contact properties are displayed: More interesting, the values of the linked INPUT elements will change automatically whenever you update the properties of the contact object they are linked to. For example, we could programmatically modify the properties of the “contact” object using the jQuery attr() method like below: Because our two INPUT elements are linked to the “contact” object, the INPUT element values will be updated automatically (without us having to write any code to modify the UI elements): Note that we updated the contact object above using the jQuery attr() method. In order for data linking to work, you must use jQuery methods to modify the property values. Two Way Linking The linkBoth() method enables two-way data linking. The contact object and INPUT elements are linked in both directions. When you modify the value of the INPUT element, the contact object is also updated automatically. For example, the following code adds a client-side JavaScript click handler to an HTML button element. When you click the button, the property values of the contact object are displayed using an alert() dialog: The following demonstrates what happens when you change the value of the Name INPUT element and click the Save button. Notice that the name property of the “contact” object that the INPUT element was linked to was updated automatically: The above example is obviously trivially simple.  Instead of displaying the new values of the contact object with a JavaScript alert, you can imagine instead calling a web-service to save the object to a database. The benefit of data linking is that it enables you to focus on your data and frees you from the mechanics of keeping your UI and data in sync. Converters The current data linking proposal also supports a feature called converters. A converter enables you to easily convert the value of a property during data linking. For example, imagine that you want to represent phone numbers in a standard way with the “contact” object phone property. In particular, you don’t want to include special characters such as ()- in the phone number - instead you only want digits and nothing else. In that case, you can wire-up a converter to convert the value of an INPUT element into this format using the code below: Notice above how a converter function is being passed to the linkFrom() method used to link the phone property of the “contact” object with the value of the phone INPUT element. This convertor function strips any non-numeric characters from the INPUT element before updating the phone property.  Now, if you enter the phone number (206) 555-9999 into the phone input field then the value 2065559999 is assigned to the phone property of the contact object: You can also use a converter in the opposite direction also. For example, you can apply a standard phone format string when displaying a phone number from a phone property. Combining Templating and Data Linking Our goal in submitting these two proposals for templating and data linking is to make it easier to work with data when building websites and applications with jQuery. Templating makes it easier to display a list of database records retrieved from a database through an Ajax call. Data linking makes it easier to keep the data and user interface in sync for update scenarios. Currently, we are working on an extension of the data linking proposal to support declarative data linking. We want to make it easy to take advantage of data linking when using a template to display data. For example, imagine that you are using the following template to display an array of product objects: Notice the {{link name}} and {{link price}} expressions. These expressions enable declarative data linking between the SPAN elements and properties of the product objects. The current jQuery templating prototype supports extending its syntax with custom template commands. In this case, we are extending the default templating syntax with a custom template command named “link”. The benefit of using data linking with the above template is that the SPAN elements will be automatically updated whenever the underlying “product” data is updated.  Declarative data linking also makes it easier to create edit and insert forms. For example, you could create a form for editing a product by using declarative data linking like this: Whenever you change the value of the INPUT elements in a template that uses declarative data linking, the underlying JavaScript data object is automatically updated. Instead of needing to write code to scrape the HTML form to get updated values, you can instead work with the underlying data directly – making your client-side code much cleaner and simpler. Downloading Working Code Examples of the Above Scenarios You can download this .zip file to get with working code examples of the above scenarios.  The .zip file includes 4 static HTML page: Listing1_Templating.htm – Illustrates basic templating. Listing2_TemplatingConditionals.htm – Illustrates templating with the use of the if and each template commands. Listing3_DataLinking.htm – Illustrates data linking. Listing4_Converters.htm – Illustrates using a converter with data linking. You can un-zip the file to the file-system and then run each page to see the concepts in action. Summary We are excited to be able to begin participating within the open-source jQuery project.  We’ve received lots of encouraging feedback in response to our first two proposals, and we will continue to actively contribute going forward.  These features will hopefully make it easier for all developers (including ASP.NET developers) to build great Ajax applications. Hope this helps, Scott P.S. [In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu]

  Read the article

• CodePlex Daily Summary for Sunday, February 28, 2010

  CodePlex Daily Summary for Sunday, February 28, 2010New ProjectsESB Toolkit Extensions: ESB Extensions is a solution containing multiple .Net Projects and artifacts: Unit Tests, Itineraries, Business Rules, Binding Files, and C# Class ...Event-Based Components Binder: The Binder automatically connects output-pins to input-pins of Event-Based Components based on message type information and naming conventions. ...Haze Anti-Virus: Haze Anti-Virus is a anti virus written in C# and has features such a realtime process watching and a Process Blacklist, and is able to download Da...latex2mathml: A .NET 2.0 library written in C# which allows the conversion of LaTeX documents to XHTML+MathML format. A stand-alone converter is included. The li...Project Lyrebird: Project lyrebird is a attempt to create a all-purpose media player. It is designed to be simple, yet powerful. Its written in C#QueryToGrid Module for DotNetNuke®: This is a module that allows you to execute and display the results of T-SQL queries in DotNetNuke using your choice of AJAX grids.Reusable Library Demo: A demonstration of reusable abstractions for enterprise application developerSharePoint 2010 Conference Samples: This project contains source code from various SharePoint 2010 conferences where Scot Hillier presented.Silverlight Photo Blogger: Silverlight Photo Blogger gives you the tools you need to capture and blog about your travels in a rich and interactive web experience. Enjoy som...SMTP Test: Several times we are faced with applications that send email, the SMTP Tester principle objective is to test various possibilities of sendingSolution Tools - tools for Visual Studio solutions and projects: Solution Tools are a collection of tools that you can use with your Visual Studio Solutions and projects.New ReleasesAgile Poker Cards for Windows Mobile: Agile Poker Cards v1.1.0.0: Agile Poker Cards v1.1.0.0 Use this application to display poker cards in a planning session on a Windows Mobile device. Release notes Added new ...BuildTools - Toolset for automated builds: BuildTools 2.0 Feb 2010 Milestone: The Feb 2010 Milestone release is a complete rewrite of the old codebase in Visual Studio 2010 RC. It features MSBuild tasks for generating build v...Composure: NHibernate-Trunk-2010-02-25-VS2010.NET4 Alpha1: Recent NHibernate-Trunk conversion for Visual Studio 2010 Beta2 against .NET 4.0. Although all of the tests pass (other than the "Ignored"), this ...Employee Scheduler: Employee Scheduler 2.4: Extract the files to a directory and run Lab Hours.exe. Add an employee. Double click an employee to modify their times. Please contact me through ...ESB Toolkit Extensions: Tellago BizTalk ESB 2.0 Toolkit Extensions: Windows Installer file that installs Library on a BizTalk ESB 2.0 system. This Install automatically configures the esb.config to use the new compo...Haze Anti-Virus: Haze Anti-Virus Binary v1.0.3: This is the Compiled version of Haze Anti-Virus, please let me know about any bugs, thanks Please Note that Database updating is currently not avai...Haze Anti-Virus: Haze Anti-Virus Source v1.0.3: This is the source for Haze Anti-VirusHOG Project: HOG Visual Studio Template: This is Visual Studio HOG Template. Created by the great tool: Solution FactoryHOG Project: Template user guide: HOW TOiTuner - The iTunes Companion: iTuner 1.1.3711: Two new features are available: the Automated Librarian and Playlist Exporter. The iTuner Automated Librarian automatically cleans the iTunes libr...johanleino.codeplex.com: SilverlightMultiLevelNavigationExample: The source code for SilverlightMultiLevelNavigationExample (VS 2010)MDownloader: MDownloader-0.15.3.56128: Fixed filefactory provider implementation after site changes.MiniTwitter: 1.09: MiniTwitter 1.09 更新内容 変更 スクロール位置がトップ以外の時は自動更新や発言時に位置を保持するように変更 タブ毎にスクロール位置が変わらないように変更 URL に ? や ! が含まれている時は短縮 URL に変換するように変更NMock3: NMock3 - Beta 4, .NET 3.5: This release includes the most current version of the NMock2 project code from Source Forge. Please start providing feedback on the tutorials. The...QueryUnit: QueryUnitPOC v. 0.0.0.7: - This version fixes problems related to the fact that in previous releases you had to specify expected values using locale-specific formats. Now e...RapidWebDev - .NET Enterprise Software Development Infrastructure: RapidWebDev 1.51: This is a hot-fix version for 1.5 which is added a new restful web service for concrete data and fixed some major bugs. The change list is as follo...Rawr: Rawr 2.3.11: - Load from Armory code cleaned up. - Tiny Abomination in a Jar's proc how now been more accurately modeled. - You should now be able to reload...Resharper Settings Manager: RSM v1.2: Changes Added Default Settings File option. The selected settings file will be loaded automatically for solutions with no settings sharing. Added...Reusable Library Demo: Reusable Library Demo v1.0.0: A demonstration of reusable abstractions for enterprise application developerRounded Corners / DIV Container: MJC RoundedDiv 3.2: This is the first public release on Codeplex.com. Versions previous to 3.2 were created before this control was made available on Codeplex.com.SharePoint 2010 Conference Samples: Samples: Download the samples from the conferencesSharePoint Outlook Connector: Version 1.2.2.8: Saving email message as list item and attachments as attachment of the list item functionality has been addedSharePoint URL Ping Tool: Url Ping Tool Solution: A solution that contain one fram fature that will add a link under Site Administration section in the Site Settings page.SMTP Test: Fist SMTP Tester: First ReleaseSolution Tools - tools for Visual Studio solutions and projects: SolutionTools binary: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead!Solution Tools - tools for Visual Studio solutions and projects: SolutionTools source - don't use this tool: Initial release of the tool. Turns out, this project was just a big waste of effort - use Project Linker instead! Anyway, here's the source code...Spark View Engine: Spark v1.1 RC1: Overview This build is a preview of v1.1. Among other changes it provides support for ASP.NET MVC 2 RC2. Spark v1.1 release will be created soon ...Sprite Sheet Packer: 2.0 Release: I'm calling this a full new release because I can. Refactored all of the build logic to sspack.exe. This allows you to run this from the command l...SPSF SharePoint Software Factory: SPSF SharePoint Software Factory 2.4.3: New features: WSPBuilder support, Simple Application now with optional multilanguage support, Extending deployment skript for large deployments Fix...TortoiseHg: Beta for TortoiseHg 1.0 (0.9.31201): Beta for TortoiseHg 1.0 (0.9.31201) Please backup your user Mercurial.ini file and then uninstall any 0.9.X release before installing Use the x86...UI Compiler .NET - JavaScript compiler/minifier built on Google Closure Compiler: UI Compiler .NET 1.5 Beta: UI Compiler .NET does not include Java. To be able to run Google Closure Compiler locally you must make sure that Java 6 is installed. If Java 6 (o...VCC: Latest build, v2.1.30227.0: Automatic drop of latest buildVisual Studio DSite: File Encryption and Decryption (Visual Basic 2008): This program will create an encrypted copy of the file specified. Also decrypt the file specified. This program contains the source code but if yo...Visual Studio DSite: Visual C++ 2008 CLR Console Application Random Int: This source code includes an example of generating a random integer between the numbers 1-100.Weather Forecast Control: MJC MyWeather 2.2: This is the first public release on Codeplex.com. Versions previous to 2.2 were created before this control was made available on Codeplex.com.Most Popular ProjectsRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETDotNetNuke® Community EditionBlogEngine.NETMost Active ProjectsDinnerNow.netRawrBlogEngine.NETMapWindow GISSLARToolkit - Silverlight Augmented Reality ToolkitCommon Context Adapterspatterns & practices – Enterprise LibrarySharpMap - Geospatial Application Framework for the CLRNB_Store - Free DotNetNuke Ecommerce Catalog ModuleRapid Entity Framework. (ORM). CTP 2

  Read the article

• C++ FBX Animation Importer Using the FBX SDK

  - by Mike Sawayda

  Does anyone have any experience using the FBX SDK to load in animations. I got the meshes loaded in correctly with all of their verts, indices, UV's, and normals. I am just now trying to get the Animations working correctly. I have looked at the FBX SDK documentation with little help. If someone could just help me get started or point me in the right direction I would greatly appreciate it. I added some code so you can kinda get an idea of what I am doing. I should be able to place that code anywhere in the load FBX function and have it work. //GETTING ANIMAION DATA for(int i = 0; i < scene->GetSrcObjectCount<FbxAnimStack>(); ++i) { FbxAnimStack* lAnimStack = scene->GetSrcObject<FbxAnimStack>(i); FbxString stackName = "Animation Stack Name: "; stackName += lAnimStack->GetName(); string sStackName = stackName; int numLayers = lAnimStack->GetMemberCount<FbxAnimLayer>(); for(int j = 0; j < numLayers; ++j) { FbxAnimLayer* lAnimLayer = lAnimStack->GetMember<FbxAnimLayer>(j); FbxString layerName = "Animation Stack Name: "; layerName += lAnimLayer->GetName(); string sLayerName = layerName; queue<FbxNode*> nodes; FbxNode* tempNode = scene->GetRootNode(); while(tempNode != NULL) { FbxAnimCurve* lAnimCurve = tempNode->LclTranslation.GetCurve(lAnimLayer, FBXSDK_CURVENODE_COMPONENT_X); if(lAnimCurve != NULL) { //I know something needs to be done here but I dont know what. } for(int i = 0; i < tempNode->GetChildCount(false); ++i) { nodes.push(tempNode->GetChild(i)); } if(nodes.size() > 0) { tempNode = nodes.front(); nodes.pop(); } else { tempNode = NULL; } } } } Here is the full function bool FBXLoader::LoadFBX(ParentMeshObject* _parentMesh, char* _filePath, bool _hasTexture) { FbxManager* fbxManager = FbxManager::Create(); if(!fbxManager) { printf( "ERROR %s : %d failed creating FBX Manager!\n", __FILE__, __LINE__ ); } FbxIOSettings* ioSettings = FbxIOSettings::Create(fbxManager, IOSROOT); fbxManager->SetIOSettings(ioSettings); FbxString filePath = FbxGetApplicationDirectory(); fbxManager->LoadPluginsDirectory(filePath.Buffer()); FbxScene* scene = FbxScene::Create(fbxManager, ""); int fileMinor, fileRevision; int sdkMajor, sdkMinor, sdkRevision; int fileFormat; FbxManager::GetFileFormatVersion(sdkMajor, sdkMinor, sdkRevision); FbxImporter* importer = FbxImporter::Create(fbxManager, ""); if(!fbxManager->GetIOPluginRegistry()->DetectReaderFileFormat(_filePath, fileFormat)) { //Unrecognizable file format. Try to fall back on FbxImorter::eFBX_BINARY fileFormat = fbxManager->GetIOPluginRegistry()->FindReaderIDByDescription("FBX binary (*.fbx)"); } bool importStatus = importer->Initialize(_filePath, fileFormat, fbxManager->GetIOSettings()); importer->GetFileVersion(fileMinor, fileMinor, fileRevision); if(!importStatus) { printf( "ERROR %s : %d FbxImporter Initialize failed!\n", __FILE__, __LINE__ ); return false; } importStatus = importer->Import(scene); if(!importStatus) { printf( "ERROR %s : %d FbxImporter failed to import the file to the scene!\n", __FILE__, __LINE__ ); return false; } FbxAxisSystem sceneAxisSystem = scene->GetGlobalSettings().GetAxisSystem(); FbxAxisSystem axisSystem( FbxAxisSystem::eYAxis, FbxAxisSystem::eParityOdd, FbxAxisSystem::eLeftHanded ); if(sceneAxisSystem != axisSystem) { axisSystem.ConvertScene(scene); } TriangulateRecursive(scene->GetRootNode()); FbxArray<FbxMesh*> meshes; FillMeshArray(scene, meshes); unsigned short vertexCount = 0; unsigned short triangleCount = 0; unsigned short faceCount = 0; unsigned short materialCount = 0; int numberOfVertices = 0; for(int i = 0; i < meshes.GetCount(); ++i) { numberOfVertices += meshes[i]->GetPolygonVertexCount(); } Face face; vector<Face> faces; int indicesCount = 0; int ptrMove = 0; float wValue = 0.0f; if(!_hasTexture) { wValue = 1.0f; } for(int i = 0; i < meshes.GetCount(); ++i) { int vertexCount = 0; vertexCount = meshes[i]->GetControlPointsCount(); if(vertexCount == 0) continue; VertexType* vertices; vertices = new VertexType[vertexCount]; int triangleCount = meshes[i]->GetPolygonVertexCount() / 3; indicesCount = meshes[i]->GetPolygonVertexCount(); FbxVector4* fbxVerts = new FbxVector4[vertexCount]; int arrayIndex = 0; memcpy(fbxVerts, meshes[i]->GetControlPoints(), vertexCount * sizeof(FbxVector4)); for(int j = 0; j < triangleCount; ++j) { int index = 0; FbxVector4 fbxNorm(0, 0, 0, 0); FbxVector2 fbxUV(0, 0); bool texCoordFound = false; face.indices[0] = index = meshes[i]->GetPolygonVertex(j, 0); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 0, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 0, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; face.indices[1] = index = meshes[i]->GetPolygonVertex(j, 1); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 1, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 1, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; face.indices[2] = index = meshes[i]->GetPolygonVertex(j, 2); vertices[index].position.x = (float)fbxVerts[index][0]; vertices[index].position.y = (float)fbxVerts[index][1]; vertices[index].position.z = (float)fbxVerts[index][2]; vertices[index].position.w = wValue; meshes[i]->GetPolygonVertexNormal(j, 2, fbxNorm); vertices[index].normal.x = (float)fbxNorm[0]; vertices[index].normal.y = (float)fbxNorm[1]; vertices[index].normal.z = (float)fbxNorm[2]; texCoordFound = meshes[i]->GetPolygonVertexUV(j, 2, "map1", fbxUV); vertices[index].texture.x = (float)fbxUV[0]; vertices[index].texture.y = (float)fbxUV[1]; faces.push_back(face); } meshes[i]->Destroy(); meshes[i] = NULL; int indexCount = faces.size() * 3; unsigned long* indices = new unsigned long[faces.size() * 3]; int indicie = 0; for(unsigned int i = 0; i < faces.size(); ++i) { indices[indicie++] = faces[i].indices[0]; indices[indicie++] = faces[i].indices[1]; indices[indicie++] = faces[i].indices[2]; } faces.clear(); _parentMesh->AddChild(vertices, indices, vertexCount, indexCount); } return true; }

  Read the article

• Host AngularJS (Html5Mode) in ASP.NET vNext

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/06/10/host-angularjs-html5mode-in-asp.net-vnext.aspxMicrosoft had announced ASP.NET vNext in BUILD and TechED recently and as a developer, I found that we can add features into one ASP.NET vNext application such as MVC, WebAPI, SignalR, etc.. Also it's cross platform which means I can host ASP.NET on Windows, Linux and OS X.   If you are following my blog you should knew that I'm currently working on a project which uses ASP.NET WebAPI, SignalR and AngularJS. Currently the AngularJS part is hosted by Express in Node.js while WebAPI and SignalR are hosted in ASP.NET. I was looking for a solution to host all of them in one platform so that my SignalR can utilize WebSocket. Currently AngularJS and SignalR are hosted in the same domain but different port so it has to use ServerSendEvent. It can be upgraded to WebSocket if I host both of them in the same port.   Host AngularJS in ASP.NET vNext Static File Middleware ASP.NET vNext utilizes middleware pattern to register feature it uses, which is very similar as Express in Node.js. Since AngularJS is a pure client side framework in theory what I need to do is to use ASP.NET vNext as a static file server. This is very easy as there's a build-in middleware shipped alone with ASP.NET vNext. Assuming I have "index.html" as below. 1: <html data-ng-app="demo"> 2: <head> 3: <script type="text/javascript" src="angular.js" /> 4: <script type="text/javascript" src="angular-ui-router.js" /> 5: <script type="text/javascript" src="app.js" /> 6: </head> 7: <body> 8: <h1>ASP.NET vNext with AngularJS</h1> 9: <div> 10: <a href="javascript:void(0)" data-ui-sref="view1">View 1</a> | 11: <a href="javascript:void(0)" data-ui-sref="view2">View 2</a> 12: </div> 13: <div data-ui-view></div> 14: </body> 15: </html> And the AngularJS JavaScript file as below. Notices that I have two views which only contains one line literal indicates the view name. 1: 'use strict'; 2:  3: var app = angular.module('demo', ['ui.router']); 4:  5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10:  11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15: }]); 16:  17: app.controller('View1Ctrl', function ($scope) { 18: }); 19:  20: app.controller('View2Ctrl', function ($scope) { 21: }); All AngularJS files are located in "app" folder and my ASP.NET vNext files are besides it. The "project.json" contains all dependencies I need to host static file server. 1: { 2: "dependencies": { 3: "Helios" : "0.1-alpha-*", 4: "Microsoft.AspNet.FileSystems": "0.1-alpha-*", 5: "Microsoft.AspNet.Http": "0.1-alpha-*", 6: "Microsoft.AspNet.StaticFiles": "0.1-alpha-*", 7: "Microsoft.AspNet.Hosting": "0.1-alpha-*", 8: "Microsoft.AspNet.Server.WebListener": "0.1-alpha-*" 9: }, 10: "commands": { 11: "web": "Microsoft.AspNet.Hosting server=Microsoft.AspNet.Server.WebListener server.urls=http://localhost:22222" 12: }, 13: "configurations" : { 14: "net45" : { 15: }, 16: "k10" : { 17: "System.Diagnostics.Contracts": "4.0.0.0", 18: "System.Security.Claims" : "0.1-alpha-*" 19: } 20: } 21: } Below is "Startup.cs" which is the entry file of my ASP.NET vNext. What I need to do is to let my application use FileServerMiddleware. 1: using System; 2: using Microsoft.AspNet.Builder; 3: using Microsoft.AspNet.FileSystems; 4: using Microsoft.AspNet.StaticFiles; 5:  6: namespace Shaun.AspNet.Plugins.AngularServer.Demo 7: { 8: public class Startup 9: { 10: public void Configure(IBuilder app) 11: { 12: app.UseFileServer(new FileServerOptions() { 13: EnableDirectoryBrowsing = true, 14: FileSystem = new PhysicalFileSystem(System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, "app")) 15: }); 16: } 17: } 18: } Next, I need to create "NuGet.Config" file in the PARENT folder so that when I run "kpm restore" command later it can find ASP.NET vNext NuGet package successfully. 1: <?xml version="1.0" encoding="utf-8"?> 2: <configuration> 3: <packageSources> 4: <add key="AspNetVNext" value="https://www.myget.org/F/aspnetvnext/api/v2" /> 5: <add key="NuGet.org" value="https://nuget.org/api/v2/" /> 6: </packageSources> 7: <packageSourceCredentials> 8: <AspNetVNext> 9: <add key="Username" value="aspnetreadonly" /> 10: <add key="ClearTextPassword" value="4d8a2d9c-7b80-4162-9978-47e918c9658c" /> 11: </AspNetVNext> 12: </packageSourceCredentials> 13: </configuration> Now I need to run "kpm restore" to resolve all dependencies of my application. Finally, use "k web" to start the application which will be a static file server on "app" sub folder in the local 22222 port.   Support AngularJS Html5Mode AngularJS works well in previous demo. But you will note that there is a "#" in the browser address. This is because by default AngularJS adds "#" next to its entry page so ensure all request will be handled by this entry page. For example, in this case my entry page is "index.html", so when I clicked "View 1" in the page the address will be changed to "/#/view1" which means it still tell the web server I'm still looking for "index.html". This works, but makes the address looks ugly. Hence AngularJS introduces a feature called Html5Mode, which will get rid off the annoying "#" from the address bar. Below is the "app.js" with Html5Mode enabled, just one line of code. 1: 'use strict'; 2:  3: var app = angular.module('demo', ['ui.router']); 4:  5: app.config(['$stateProvider', '$locationProvider', function ($stateProvider, $locationProvider) { 6: $stateProvider.state('view1', { 7: url: '/view1', 8: templateUrl: 'view1.html', 9: controller: 'View1Ctrl' }); 10:  11: $stateProvider.state('view2', { 12: url: '/view2', 13: templateUrl: 'view2.html', 14: controller: 'View2Ctrl' }); 15:  16: // enable html5mode 17: $locationProvider.html5Mode(true); 18: }]); 19:  20: app.controller('View1Ctrl', function ($scope) { 21: }); 22:  23: app.controller('View2Ctrl', function ($scope) { 24: }); Then let's went to the root path of our website and click "View 1" you will see there's no "#" in the address. But the problem is, if we hit F5 the browser will be turn to blank. This is because in this mode the browser told the web server I want static file named "view1" but there's no file on the server. So underlying our web server, which is built by ASP.NET vNext, responded 404. To fix this problem we need to create our own ASP.NET vNext middleware. What it needs to do is firstly try to respond the static file request with the default StaticFileMiddleware. If the response status code was 404 then change the request path value to the entry page and try again. 1: public class AngularServerMiddleware 2: { 3: private readonly AngularServerOptions _options; 4: private readonly RequestDelegate _next; 5: private readonly StaticFileMiddleware _innerMiddleware; 6:  7: public AngularServerMiddleware(RequestDelegate next, AngularServerOptions options) 8: { 9: _next = next; 10: _options = options; 11:  12: _innerMiddleware = new StaticFileMiddleware(next, options.FileServerOptions.StaticFileOptions); 13: } 14:  15: public async Task Invoke(HttpContext context) 16: { 17: // try to resolve the request with default static file middleware 18: await _innerMiddleware.Invoke(context); 19: Console.WriteLine(context.Request.Path + ": " + context.Response.StatusCode); 20: // route to root path if the status code is 404 21: // and need support angular html5mode 22: if (context.Response.StatusCode == 404 && _options.Html5Mode) 23: { 24: context.Request.Path = _options.EntryPath; 25: await _innerMiddleware.Invoke(context); 26: Console.WriteLine(">> " + context.Request.Path + ": " + context.Response.StatusCode); 27: } 28: } 29: } We need an option class where user can specify the host root path and the entry page path. 1: public class AngularServerOptions 2: { 3: public FileServerOptions FileServerOptions { get; set; } 4:  5: public PathString EntryPath { get; set; } 6:  7: public bool Html5Mode 8: { 9: get 10: { 11: return EntryPath.HasValue; 12: } 13: } 14:  15: public AngularServerOptions() 16: { 17: FileServerOptions = new FileServerOptions(); 18: EntryPath = PathString.Empty; 19: } 20: } We also need an extension method so that user can append this feature in "Startup.cs" easily. 1: public static class AngularServerExtension 2: { 3: public static IBuilder UseAngularServer(this IBuilder builder, string rootPath, string entryPath) 4: { 5: var options = new AngularServerOptions() 6: { 7: FileServerOptions = new FileServerOptions() 8: { 9: EnableDirectoryBrowsing = false, 10: FileSystem = new PhysicalFileSystem(System.IO.Path.Combine(AppDomain.CurrentDomain.BaseDirectory, rootPath)) 11: }, 12: EntryPath = new PathString(entryPath) 13: }; 14:  15: builder.UseDefaultFiles(options.FileServerOptions.DefaultFilesOptions); 16:  17: return builder.Use(next => new AngularServerMiddleware(next, options).Invoke); 18: } 19: } Now with these classes ready we will change our "Startup.cs", use this middleware replace the default one, tell the server try to load "index.html" file if it cannot find resource. The code below is just for demo purpose. I just tried to load "index.html" in all cases once the StaticFileMiddleware returned 404. In fact we need to validation to make sure this is an AngularJS route request instead of a normal static file request. 1: using System; 2: using Microsoft.AspNet.Builder; 3: using Microsoft.AspNet.FileSystems; 4: using Microsoft.AspNet.StaticFiles; 5: using Shaun.AspNet.Plugins.AngularServer; 6:  7: namespace Shaun.AspNet.Plugins.AngularServer.Demo 8: { 9: public class Startup 10: { 11: public void Configure(IBuilder app) 12: { 13: app.UseAngularServer("app", "/index.html"); 14: } 15: } 16: } Now let's run "k web" again and try to refresh our browser and we can see the page loaded successfully. In the console window we can find the original request got 404 and we try to find "index.html" and return the correct result.   Summary In this post I introduced how to use ASP.NET vNext to host AngularJS application as a static file server. I also demonstrated how to extend ASP.NET vNext, so that it supports AngularJS Html5Mode. You can download the source code here.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• Building an HTML5 App with ASP.NET

  - by Stephen Walther

  I’m teaching several JavaScript and ASP.NET workshops over the next couple of months (thanks everyone!) and I thought it would be useful for my students to have a really easy to use JavaScript reference. I wanted a simple interactive JavaScript reference and I could not find one so I decided to put together one of my own. I decided to use the latest features of JavaScript, HTML5 and jQuery such as local storage, offline manifests, and jQuery templates. What could be more appropriate than building a JavaScript Reference with JavaScript? You can try out the application by visiting: http://Superexpert.com/JavaScriptReference Because the app takes advantage of several advanced features of HTML5, it won’t work with Internet Explorer 6 (but really, you should stop using that browser). I have tested it with IE 8, Chrome 8, Firefox 3.6, and Safari 5. You can download the source for the JavaScript Reference application at the end of this article. Superexpert JavaScript Reference Let me provide you with a brief walkthrough of the app. When you first open the application, you see the following lookup screen: As you type the name of something from the JavaScript language, matching results are displayed: You can click the details link for any entry to view details for an entry in a modal dialog: Alternatively, you can click on any of the tabs -- Objects, Functions, Properties, Statements, Operators, Comments, or Directives -- to filter results by type of syntax. For example, you might want to see a list of all JavaScript built-in objects: You can login to the application to make modification to the application: After you login, you can add, update, or delete entries in the reference database: HTML5 Local Storage The application takes advantage of HTML5 local storage to store all of the reference entries on the local browser. IE 8, Chrome 8, Firefox 3.6, and Safari 5 all support local storage. When you open the application for the first time, all of the reference entries are transferred to the browser. The data is stored persistently. Even if you shutdown your computer and return to the application many days later, the data does not need to be transferred again. Whenever you open the application, the app checks with the server to see if any of the entries have been updated on the server. If there have been updates, then only the updates are transferred to the browser and the updates are merged with the existing entries in local storage. After the reference database has been transferred to your browser once, only changes are transferred in the future. You get two benefits from using local storage. First, the application loads very fast and works very fast after the data has been loaded once. The application does not query the server whenever you filter or view entries. All of the data is persisted in the browser. Second, you can browse the JavaScript reference even when you are not connected to the Internet (when you are on the proverbial airplane). The JavaScript Reference works as an offline application for browsers that support offline applications (unfortunately, not IE). When using Google Chrome, you can easily view the contents of local storage by selecting Tools, Developer Tools (CTRL-SHIFT I) and selecting Storage, Local Storage: The JavaScript Reference app stores two items in local storage: entriesLastUpdated and entries. HTML5 Offline App For browsers that support HTML5 offline applications – Chrome 8 and Firefox 3.6 but not Internet Explorer – you do not need to be connected to the Internet to use the JavaScript Reference. The JavaScript Reference can execute entirely on your machine just like any other desktop application. When you first open the application with Firefox, you are presented with the following warning: Notice the notification bar that asks whether you want to accept offline content. If you click the Allow button then all of the files (generated ASPX, images, CSS, JavaScript) needed for the JavaScript Reference will be stored on your local computer. Automatic Script Minification and Combination All of the custom JavaScript files are combined and minified automatically whenever the application is built with Visual Studio. All of the custom scripts are contained in a folder named App_Scripts: When you perform a build, the combine.js and combine.debug.js files are generated. The Combine.config file contains the list of files that should be combined (importantly, it specifies the order in which the files should be combined). Here’s the contents of the Combine.config file:   <?xml version="1.0"?> <combine> <scripts> <file path="compat.js" /> <file path="storage.js" /> <file path="serverData.js" /> <file path="entriesHelper.js" /> <file path="authentication.js" /> <file path="default.js" /> </scripts> </combine>   jQuery and jQuery UI The JavaScript Reference application takes heavy advantage of jQuery and jQuery UI. In particular, the application uses jQuery templates to format and display the reference entries. Each of the separate templates is stored in a separate ASP.NET user control in a folder named Templates: The contents of the user controls (and therefore the templates) are combined in the default.aspx page: <!-- Templates --> <user:EntryTemplate runat="server" /> <user:EntryDetailsTemplate runat="server" /> <user:BrowsersTemplate runat="server" /> <user:EditEntryTemplate runat="server" /> <user:EntryDetailsCloudTemplate runat="server" /> When the default.aspx page is requested, all of the templates are retrieved in a single page. WCF Data Services The JavaScript Reference application uses WCF Data Services to retrieve and modify database data. The application exposes a server-side WCF Data Service named EntryService.svc that supports querying, adding, updating, and deleting entries. jQuery Ajax calls are made against the WCF Data Service to perform the database operations from the browser. The OData protocol makes this easy. Authentication is handled on the server with a ChangeInterceptor. Only authenticated users are allowed to update the JavaScript Reference entry database. JavaScript Unit Tests In order to build the JavaScript Reference application, I depended on JavaScript unit tests. I needed the unit tests, in particular, to write the JavaScript merge functions which merge entry change sets from the server with existing entries in browser local storage. In order for unit tests to be useful, they need to run fast. I ran my unit tests after each build. For this reason, I did not want to run the unit tests within the context of a browser. Instead, I ran the unit tests using server-side JavaScript (the Microsoft Script Control). The source code that you can download at the end of this blog entry includes a project named JavaScriptReference.UnitTests that contains all of the JavaScripts unit tests. JavaScript Integration Tests Because not every feature of an application can be tested by unit tests, the JavaScript Reference application also includes integration tests. I wrote the integration tests using Selenium RC in combination with ASP.NET Unit Tests. The Selenium tests run against all of the target browsers for the JavaScript Reference application: IE 8, Chrome 8, Firefox 3.6, and Safari 5. For example, here is the Selenium test that checks whether authenticating with a valid user name and password correctly switches the application to Admin Mode: [TestMethod] [HostType("ASP.NET")] [UrlToTest("http://localhost:26303/JavaScriptReference")] [AspNetDevelopmentServerHost(@"C:\Users\Stephen\Documents\Repos\JavaScriptReference\JavaScriptReference\JavaScriptReference", "/JavaScriptReference")] public void TestValidLogin() { // Run test for each controller foreach (var controller in this.Controllers) { var selenium = controller.Value; var browserName = controller.Key; // Open reference page. selenium.Open("http://localhost:26303/JavaScriptReference/default.aspx"); // Click login button displays login form selenium.Click("btnLogin"); Assert.IsTrue(selenium.IsVisible("loginForm"), "Login form appears after clicking btnLogin"); // Enter user name and password selenium.Type("userName", "Admin"); selenium.Type("password", "secret"); selenium.Click("btnDoLogin"); // Should set adminMode == true selenium.WaitForCondition("selenium.browserbot.getCurrentWindow().adminMode==true", "30000"); } }   The results for running the Selenium tests appear in the Test Results window just like the unit tests: The Selenium tests take much longer to execute than the unit tests. However, they provide test coverage for actual browsers. Furthermore, if you are using Visual Studio ALM, you can run the tests automatically every night as part of your standard nightly build. You can view the Selenium tests by opening the JavaScriptReference.QATests project. Summary I plan to write more detailed blog entries about this application over the next week. I want to discuss each of the features – HTML5 local storage, HTML5 offline apps, jQuery templates, automatic script combining and minification, JavaScript unit tests, Selenium tests -- in more detail. You can download the source control for the JavaScript Reference Application by clicking the following link: Download You need Visual Studio 2010 and ASP.NET 4 to build the application. Before running the JavaScript unit tests, install the Microsoft Script Control. Before running the Selenium tests, start the Selenium server by running the StartSeleniumServer.bat file located in the JavaScriptReference.QATests project.

  Read the article

• Dual Boot issues with Windows 7 and Ubuntu

  - by Michael

  I'm finding myself in a rather unique situation. I've read through just about every resource I can find about this and while things have helped me understand some background, I haven't yet been able to find a solution. So I'm asking here. I originally had just a Windows 7 64-bit OS installation on my desktop. Learning that I couldn't do anything with Apache, PHP and MySql from within a 64-bit system, I did some research and found out that I could use Ubuntu. I've installed the latest version: 11.04. I created a CD to install Ubuntu from and the install went just fine. I installed it side-by-side with Windows 7. I can boot into Ubuntu just fine through the dual-boot option. When I reboot to load Windows though, the Grub2 list shows Windows 7 (loader) and when I select this option the Windows System Recovery loads instead of the actual OS. I haven't made it past there because I didn't know what to do. I just shut the computer down and rebooted into Ubuntu. I've been working for the last hour and a half to try to figure out how to boot into the Windows 7 OS and I haven't got a clue. While I'm somewhat proficient with Windows 7, I'm totally new to Ubuntu, so if you do know what needs to happen, please keep it simple enough that I'll be able to understand. Thanks for all your help in advance. Here's the results after using the Boot Info Script: Boot Info Script 0.55 dated February 15th, 2010 ============================= Boot Info Summary: ============================== => Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for cbh. => Windows is installed in the MBR of /dev/sdb => Grub 2 is installed in the MBR of /dev/mapper/pdc_bdadcfbdif and looks on the same drive in partition #5 for cbh. sda1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sda3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy sdb1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD sdb2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: sdb3: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /boot/BCD sdb4: _________________________________________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sdb5: _________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu 11.04 Boot files/dirs: /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img sdb6: _________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: pdc_bdadcfbdif1: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files/dirs: /bootmgr /Boot/BCD pdc_bdadcfbdif2: _________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe pdc_bdadcfbdif3: _________________________________________________________________________ File system: Boot sector type: Unknown Boot sector info: Mounting failed: fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy fuse: mount failed: Device or resource busy mount: unknown filesystem type '' =========================== Drive/Partition Info: ============================= Drive: sda ___________________ _____________________________________________________ Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sda1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sda2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/sda3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS Drive: sdb ___________________ _____________________________________________________ Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/sdb1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/sdb2 206,911 1,342,554,688 1,342,347,778 7 HPFS/NTFS /dev/sdb3 1,930,344,448 1,953,521,663 23,177,216 7 HPFS/NTFS /dev/sdb4 1,342,556,158 1,930,344,447 587,788,290 5 Extended /dev/sdb5 1,342,556,160 1,896,806,399 554,250,240 83 Linux /dev/sdb6 1,896,808,448 1,930,344,447 33,536,000 82 Linux swap / Solaris Drive: pdc_bdadcfbdif ___________________ _____________________________________________________ Disk /dev/mapper/pdc_bdadcfbdif: 750.0 GB, 749999947776 bytes 255 heads, 63 sectors/track, 91182 cylinders, total 1464843648 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start End Size Id System /dev/mapper/pdc_bdadcfbdif1 * 2,048 206,847 204,800 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif2 206,911 1,440,372,735 1,440,165,825 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 1,440,372,736 1,464,856,575 24,483,840 7 HPFS/NTFS /dev/mapper/pdc_bdadcfbdif3 ends after the last sector of /dev/mapper/pdc_bdadcfbdif blkid -c /dev/null: ____________________________________________________________ Device UUID TYPE LABEL /dev/mapper/pdc_bdadcfbdif1 888E54CC8E54B482 ntfs SYSTEM /dev/mapper/pdc_bdadcfbdif2 C2766BF6766BEA1D ntfs OS /dev/mapper/pdc_bdadcfbdif: PTTYPE="dos" /dev/sda1 888E54CC8E54B482 ntfs SYSTEM /dev/sda2 C2766BF6766BEA1D ntfs OS /dev/sda3 BE6CA31D6CA2CF87 ntfs HP_RECOVERY /dev/sda promise_fasttrack_raid_member /dev/sdb1 20B65685B6565B7C ntfs SYSTEM /dev/sdb2 B4467A314679F508 ntfs HP /dev/sdb3 6E10B7A410B77227 ntfs FACTORY_IMAGE /dev/sdb4: PTTYPE="dos" /dev/sdb5 266f9801-cf4f-4acc-affa-2092be035f0c ext4 /dev/sdb6 1df35749-a887-45ff-a3de-edd52239847d swap /dev/sdb: PTTYPE="dos" error: /dev/mapper/pdc_bdadcfbdif3: No such file or directory error: /dev/sdc: No medium found error: /dev/sdd: No medium found error: /dev/sde: No medium found error: /dev/sdf: No medium found error: /dev/sdg: No medium found ============================ "mount | grep ^/dev output: =========================== Device Mount_Point Type Options /dev/sdb5 / ext4 (rw,errors=remount-ro,commit=0) =========================== sdb5/boot/grub/grub.cfg: =========================== # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod vbe insmod vga insmod video_bochs insmod video_cirrus } insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm fi terminal_output gfxterm insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc- affa-2092be035f0c ro quiet splash vt.handoff=7 initrd /boot/initrd.img-2.6.38-8-generic-pae } menuentry 'Ubuntu, with Linux 2.6.38-8-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail set gfxpayload=$linux_gfx_mode insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c echo 'Loading Linux 2.6.38-8-generic-pae ...' linux /boot/vmlinuz-2.6.38-8-generic-pae root=UUID=266f9801-cf4f-4acc-affa-2092be035f0c ro single echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-2.6.38-8-generic-pae } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_msdos insmod ext2 set root='(/dev/sdb,msdos5)' search --no-floppy --fs-uuid --set=root 266f9801-cf4f-4acc-affa-2092be035f0c linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### menuentry "Windows 7 (loader) (on /dev/sdb1)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos1)' search --no-floppy --fs-uuid --set=root 20B65685B6565B7C chainloader +1 } menuentry "Windows Recovery Environment (loader) (on /dev/sdb3)" --class windows --class os { insmod part_msdos insmod ntfs set root='(/dev/sdb,msdos3)' search --no-floppy --fs-uuid --set=root 6E10B7A410B77227 drivemap -s (hd0) ${root} chainloader +1 } ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### =============================== sdb5/etc/fstab: =============================== # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sdb5 during installation UUID=266f9801-cf4f-4acc-affa-2092be035f0c / ext4 errors=remount-ro 0 1 # swap was on /dev/sdb6 during installation UUID=1df35749-a887-45ff-a3de-edd52239847d none swap sw 0 0 =================== sdb5: Location of files loaded by Grub: =================== 900.1GB: boot/grub/core.img 825.0GB: boot/grub/grub.cfg 688.7GB: boot/initrd.img-2.6.38-8-generic-pae 688.0GB: boot/vmlinuz-2.6.38-8-generic-pae 688.7GB: initrd.img 688.0GB: vmlinuz =========================== Unknown MBRs/Boot Sectors/etc ======================= Unknown BootLoader on pdc_bdadcfbdif3 =======Devices which don't seem to have a corresponding hard drive============== sdc sdd sde sdf sdg =============================== StdErr Messages: =============================== ERROR: dos: partition address past end of RAID device hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory hexdump: /dev/mapper/pdc_bdadcfbdif3: No such file or directory ERROR: dos: partition address past end of RAID device

  Read the article

• CodePlex Daily Summary for Friday, April 30, 2010

  CodePlex Daily Summary for Friday, April 30, 2010New ProjectsAcres2: This is the new hotnessAsoraX.de - AirlineTycoon: EntwicklungsPhase von AsoraX.deazshop: Ecommerce macros and user controls based on Commerce4Umbraco from Umbraco CMS Project.BioPhotoAnalyzer: Some exercises with F#, WPF and Mathematical methods for quantitative analysis of biological photos, such as those obtained from microscopy, PAGE etcCECS622 - Simulations - South Computing Center: This simulation will be used to study the traffic flow of the South Computing Center (SCC) on the UofL campus. Document.Viewer: Basic document viewer for Windows XP, Vista and Windows 7 that supports FlowDocument, Rich and Plan Text FormatsDotNetNuke 5 Thai Language Pack: DotNetNuke Thai Language PackDotNetNuke Skins Pack: We derive html/css template from www.freecsstemplates.org and apply to DotNetNuke 4 & 5 Skins Pack.Dynamics AX Business Intelligence: Sample code for creating and using Dynamics AX Business Intelligence Easy Chat: Very simple kind of chat; it got DOS interface. It's just to start the server start the client enter the IP, enter your name, and you're ready to go!Html Source Transmitter Control: This web control allows getting a source of a web page, that will displayed before submit. So, developer can store a view of the html page, that wa...HydroServer - CUAHSI Hydrologic Information System Server: HydroServer is a set of software applications for publishing hydrologic datasets on the Internet. HydroServer leverages commercial software such a...Lisp.NET: Lisp.NET is a project that demonstrates how the Embedded Common Lisp (ECL) environment can be loaded and used from .NET. This enables Common Lisp ...Live-Exchange Calendar Sync: Live - Exchange Calendar Sync synchronizes calendars of users between 2 Exchange servers (it can be Live Calendar also). It's developed in C#. It u...MaLoRT : Mac Lovin' RayTracer: RaytracerMojo Workflow Web UI: Mojo Workflow Web UIMoonRover - Enter Island: Simple Graphics consumer application that simulates Moon RoversMVC Music Store: MVC Music Store is a tutorial application built on ASP.NET MVC 2. It's a lightweight sample store which sells albums online, demonstrating ASP.NET ...OpenPOS: OpenPOS, a completely open and free point-of-sale systemPgcDemuxCLI: A modified version of PgcDemux (http://download.videohelp.com/jsoto/dvdtools.htm) that has better CLI support and progress reporting.Sample 01: basic summarySharedEx: App dev in VS2010 RTM and Silverlight 4.0 for Windows Phone 7!SharePoint 2010 Managed Metadata WebPart: This SharePoint 2010 webpart creates a navigation control from a Managed Metadata column assigned to a list/library. The Termset the column relates...SharePoint 2010 Service Manager: The SharePoint Service manager let's you start and stop all the SharePoint 2010 services on your workstation. This is useful if you are running S...Sharp DOM: Sharp DOM is a view engine for ASP.NET MVC platform allowing developers to design extendable and maintenable dynamic HTML layouts using C# 4.0 lang...simple fx: simple framework written in javascriptSimpleGFC.NET: Simple GFC is a .NET library written in C# for simplifying the connection to Google Friend Connect. It is designed to be simple and concise, not a...SPSS & PSPP file library: Library for importing SPSS (now called PASW) & PSPP .sav datafiles, developed in C#. Support for writing and SPSS portable-files will be implemente...TailspinSpyworks - WebForms Sample Application: Tailspin Spyworks demonstrates how extraordinarily simple it is to create powerful, scalable applications for the .NET platform. It shows off how t...VividBed: Business website.卢融凯的个人主页: 卢融凯的个人主页New ReleasesAssemblyVerifier: 4.0.0.0 Release: Updated to target .NET 4.0Bricks' Bane: Bricks' Bane Editor v1.0.0.4: I've added functionality to the editor, after some personal use. Plus I fixed a bug that was occurring on file loading mostly when the file was mod...Dambach Linear Algebra Framework: Linear Algebra Framework - Sneak Peak: This is just to get the code out there into the hands of potential users and to elicit feedback.DevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 4a: DevTreks calculators, analyzers, and story tellers are being upgraded so that they can be extended by third parties using either add-ins (Managed ...DirectQ: Release 1.8.3c: Fixes some more late-breaking bugs and adds some optimizations from the forthcoming 1.8.4 release. No Windows 98 build this time. I may add one a...Document Assembly from a SharePoint Library using the Open XML SDK: Solution for March 2010 rel of the Open XML SDK: Microsoft changed some class names between the December 2009 CTP and the March 2010 release of the Open XML SDK which means that old solution will ...Document.Viewer: 0.9.0: Whats New?: New icon set Bug fix'sDotNetNuke Skins Pack: DNN 80 Skins Pack: This released is the first for DNN 4 & 5 with Skin Token Design (legacy skin support on DNN 4 & 5)DotNetWinService: Release 1.0.0.0: This release includes four different scheduled tasks: 1) TaskURL: Petition a specific URL: when working on a ASP.NET website, it's sometimes ...Hammock for REST: Hammock v1.0.1: v1.0.1 ChangesFixes to improve OAuth stability Fixes for asynchronous timeouts Fixes and simplification for retries v1.0 FeaturesSimple, clean...Home Access Plus+: v4.1.1: v4.1.1 Change Log: Added Enable for Booking Resource to allow Resources to be disabled but not deleted Updated HAP.Config for above File Changes...HouseFly controls: HouseFly controls alpha 0.9.6.0: HouseFly controls release 0.9.6.0 alphaHydroServer - CUAHSI Hydrologic Information System Server: ODM Data Loader 1.1.3: Version 1.1.3 of the ODM Data Loader is only compatible with version 1.1 of ODM This Version Addresses : Memory issues in Version 1.1.2 that were ...Jobping Url Shortener: Source Code v0.1: Source code for the 0.1 release.LinkedIn® for Windows Mobile: LinkedIn for Windows Mobile v0.6: Fixed the crash after accepting the use of internet access.mojoPortal: 2.3.4.3: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2343-released.aspxMoonRover - Enter Island: Moon Rover: Simulates Rover Moves on MoonNanoPrompt: Release 0.4.1 - Beta 1.1: Now released: Beta 1.1 for .NET 4.0ORAYLIS BI.SmartDiff: Release 1.0.0: see change log for detailsQuickStart Engine (3D Game Engine for XNA): QuickStart Engine v0.22: Main FeaturesClean engine architecture Makes it easy to make your own game using the engine. Messaging system allows you to communicate between s...SharePoint 2010 Managed Metadata WebPart: Taxonomy WebPart 0.0.1: Initial version releasedSharePoint 2010 Service Manager: SharePoint Service Manager 2010 v1: Starts and stops all SharePoint services Works with both Microsoft SQL Server and SQL Server Express Edition (for SharePoint) Supports disablin...Shweet: SharePoint 2010 Team Messaging built with Pex: Shweet RTM Release: Shweet has been updated to work with the RTM of SharePoint and the latest version of Pex Visual Studio 2010 Power Tools. Know issues: Continuous I...Silverlight Testing Automation Tool: StatLight v1.0 - Beta 1: Things still to accomplish (before official v1 release)Item # 10716: Release build hangs on x64 machine Still awaiting UnitDriven change feedback...SPSS & PSPP file library: 0.1 alpha: This first test release allows to read an .sav SPSS/PSPP/PASW file and retreive the data, either in the form of a .net DataReader or as a custom Sp...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.0.0: Initial Public Release Requirements: .NET Framework 2.0 SqlDiffFramework is designed for the enterprise! Check with your system administrator (or...sqwarea: Sqwarea 0.0.210.0 (alpha): First public release. Deploy package contains : the documentation for classes. the azure package with the Web Role. the zip with assemblies wh...Sweeper: Sweeper Alpha 2: SweeperA Visual Studio Add-in for C# Code Formatting - Visual Studio 2008 Includes: A UI for options, Enable or disable any specific task you want ...TailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.8: ASP.NET 4 ECommerce ApplicationTweetSharp: TweetSharp Release Candidate: New FeaturesComplete core rewrite for stability and speed, introducing Hammock http://hammock.codeplex.com Windows Phone 7, Silverlight 4 OOB (El...Wicked Compression ASP.NET HTTP Module: Wicked Compression ASP.NET HTTP Module Beta: Now supports AJAX from .NET Framework 2.0 through 4.0! Bug Fix for Excluded Paths! Binary Release Included for .NET Framework 2.0 through 4.0!Most Popular ProjectsRawrWBFS ManagerAJAX Control Toolkitpatterns & practices – Enterprise LibraryMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)iTuner - The iTunes CompanionASP.NETDotNetNuke® Community EditionMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterHydroServer - CUAHSI Hydrologic Information System ServerGMap.NET - Great Maps for Windows Forms & PresentationParticle Plot Pivotpatterns & practices: Azure Security GuidanceSqlDiffFramework-A Visual Differencing Engine for Dissimilar Data SourcesNB_Store - Free DotNetNuke Ecommerce Catalog ModuleN2 CMS

  Read the article

• CodePlex Daily Summary for Saturday, June 05, 2010

  CodePlex Daily Summary for Saturday, June 05, 2010New Projects555 Calculator: A simple calculator to help choosing resistor and capacitor values to get the frequency you're looking for on a 555 timer.BleQua .NET: PL: Program sieciowy BleQua .NET jest multi-komunikatorem. EN: Network program BleQua .NET is multicomunicator.ChatDiplomaWork: ChatSample is the sample project.CSUFVGDC Summer Jam: Repository for VGDC summer game jam.Database Export Wizard: ExportWizard is a Step Wizard for Database Export using ASP.net and SQL Server. It allows easy export in any of the standard formats: CSV, TXT, HTM...Dozer Enterprise Library for .NET: a light .net framework for enterprise applications developmentEmployee Management System: This is an Employee Management System. the goal here is to offer a software that caters to small to mid sized businesses for free. This program a...Fanray: My project on Codeplex.Infragistics Analytics Framework: This project includes wrappers for the Infragistics controls that integrate with the recently launched Microsoft Silverlight Analytics Framework. ...KIME Simio Extensions: This is the official project of KIME Solutions. Here you find any current developments of KIME that are publicly available. KIME develops extension...MindTouch Community Extensions: MindTouch Community Extentions is a Native C# extention library for MindTouch Core that will have Dekiscript functions for full coverage of the API...NginxTray: NginxTray allows you manage easily Nginx Web Server by a Tray icon.NStore: NStore is a virtual store example done with ASP.NET MVC 2.0 tecnologyProjet Campus Numerique + Appli Mobile: Projet de création d'un campus numérique pour l'ISEN et d'un application mobile d'accès.SharePoint 2010 Feature Upgrade Kit: A set of tools for managing upgradable Features in SharePoint 2010. (Upgrading Features is a means of deploying code/artifact updates to existing S...SiteMap Utility for DNN Blog Module: This is a mini-project which allows you to easily add or generate an XML site map to your DotNetNuke® website for the search engines to use to inde...Space Explorer: A small app to help users examine folders to see which files and subfolders are taking up space. Still in development, no releases available curren...SQL Compact Toolbox: SQL Compact Toolbox is a Visual Studio 2010 add-in, that adds scripting, import, export, migrate, rename, run script and other upcoming SQL Server ...Twilverlight: Twliverlight is TweetDeck mixed with Silverlight. Much as I like using TweetDeck, it hogs my memory out, so this is an attempt to write a memory-ef...Visual Studio 2010 FxCop Extension: Visual Studio 2010 FxCop Extension allows to integrate stand-alone FxCop into Visual Studio 2010. You'll be able to analysis your source code with ...VisualStudio 2010 JavaScript Outlining: Visual Studio 2010 editor extension for JavaScript code blocks and custom regions outlining Wiki Shelf: Wiki Shelf is a Wikipedia browser app. The goal is to bring the library experience of browsing books, studying, and researching to the Wikipedia u...X-Arena - Magic: Projeto de PDS2 no Curso de Tecnologia em Desenvolvimento de Software no CEFETRN. O desenvolvimento do jogo Quiz Arena possui como pr...New Releases555 Calculator: 555Calc release v1.0: The initial 1 point uh-oh release of 555Calc.BleQua .NET: BleQua .NET 1.0.0.0: First releaseChatterbot JBot: JBot 1.0.1.155: Change presentation technology from Window Forms to Widndown Presentation Fundation.Community Forums NNTP bridge: Community Forums NNTP Bridge V26: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V27: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...Community Forums NNTP bridge: Community Forums NNTP Bridge V28: Release of the Community Forums NNTP Bridge to access the social and anwsers MS forums with a single, open source NNTP bridge. This release has ad...CSS 360 Planetary Calendar: Final Release: =============================================================================== Final Release Version: 2.0 Tools Used: - Collaboration, Releas...Database Export Wizard: Version 3: As described in CodeProject article: Database Export Wizard for ASP.net and SQL Server. http://www.codeproject.com/KB/aspnet/DatabaseExportWizard.aspxEdu Math: Edu Math 2.0.10.122: Change version .NET Framework.Employee Management System: V1 (beta): This version is still in beta testing. Any issues, comments or suggestions are greatly appreciated. The export to excel function in this release o...ESB.NET: ESBDeploy_7.0.27.0 (x64 and x86) [ESB.NET 7.0 RC1]: Release Details Changes Since Last Release (since 6.3.47.1) - Targets .NET Framework 4, Visual Studio.NET 2010, Workflow 4 - Flowchart workflow ada...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.1.1 beta 2 Released: Hi, This release contains the following enhancements: *ShowIndicator() and HideIndicator() function has been implemented in Chart. So now user wi...Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.5.4 beta 2 Released: Hi, This release contains the following enhancements: *ShowIndicator() and HideIndicator() function has been implemented in Chart. So now user wi...FsCheck: A random testing framework: FsCheck 0.7: What to download? If you use F# April 2010 CTP with Visual Studio 2008 or Visual Studio 2010, either Source or Binaries will do. To open source in...Git Source Control Provider: V 0.5: For VS 2010 users, it is recommanded to install it within Visual Studio by selecting Tools | Extension Manager. Run Visual Studio. Go to Tools ...GPdotNET - Genetic Programming Tool: GPdotNETv0.95: 1. Localization support 2. Export functionality for GP Model with training and testing data. 3. Export GPModel with Testing and Training data. 4....JoshDOS: JoshDOS 1.1: 1.1 adds a toutorial of how to create new commands and of course, you need the COMSOS user kit or dev kit. Ver 1.1 also includes a demo called Gue...KIME Simio Extensions: KIME.SimioDebugStep: This simple Simio step allows you to debug any number of expressions from within the simulation run. The debug information is displayed using a mes...NginxTray: NginxTray 0.3 Beta 2: NginxTray 0.3 Beta 2NginxTray: NginxTray 0.5 Beta 3: NginxTray 0.5 Beta 3NginxTray: NginxTray 0.6 RC1: NginxTray 0.6 RC1Open Source PLM Activities: Prodeos_OC beta 1.0: The “Innovator – MS Office Connector” is a product developed by Prodeos (www.prodeos.com). It is a light connector made to facilitate the use of Mi...Paint.NET PSD Plugin: 1.5.1: Changes in this release: Bitmap-mode images can now be loaded. Thanks to dhnc for filing the bug. Plugin no longer crashes on files with user m...SharePoint 2010 Feature Upgrade Kit: 1.0.0.0: This release contains:- - Custom application page to manage the upgrade of Site and Web-scoped Features. To come in the next release: - Companio...SiteMap Utility for DNN Blog Module: Blog SiteMap Utility v01.00.01: This is the first public release of the SiteMap Utility for the core DotNetNuke® Blog Module. Please see the documentation on this site on how to...SqlDiffFramework-A Visual Differencing Engine for Dissimilar Data Sources: SqlDiffFramework 1.0.2.0: Maintenance Release Defect Fixes: Issue # 3: 3 Issue # 4: 4 Enhancements: About Box now displays regional and language settings in effect. SDF...SuperSocket: First release of SuperSocket: !First release of SuperSocketThe Fastcopy Helper: FastcopyHelper: Fastcopy Helper 2.0 This is a final one. You can use it on the way. In order to use it , you should have the .NET3.5 ! 此软件必须下载 .NET3.5平台，方可使用！TV Show Renamer: TV Show Renamer Beta 3: I found the bug the prevented it from closing correctly so I fixed it and had to release it right away. If anyone else finds any problems. contact me.UrzaGatherer: UrzaGatherer v2.0: UrzaGatherer is the first stable version. This release include UrzaBackgroundPictures.VisualStudio 2010 JavaScript Outlining: VisualStudion 2010 Javascript Outlining 1.0: Features Outlines JavaScript codeblock regions for the code placed between { }. Both places on a new line. Outlines custom regions defined by: //...Wouter's SharePoint Demo Land: Navigation Service with Proxy: A SharePoint 2010 Service Application that uses service proxies to relay commands to the actual service. The demo proxy makes use of in-memory comm...盘古分词-开源中文分词组件: V2.0.0.0: 进一步优化性能，分词速度达到将近 500K ，1.2.0.1 版本只有 320K 修改 PanGu.Lucene.Analyzer, 支持 Lucene.net 2.9 版本。 增加对字典中以数字开头的专业非中文词汇的识别 增加英文分词开关，权重由英文小写权重和英文词根权重两个参数来决定...Most Popular ProjectsCommunity Forums NNTP bridgeOutSyncASP.NET MVC Time PlannerNeatUploadMoonyDesk (windows desktop widgets)AgUnit - Silverlight unit testing with ReSharperViperWorks IgnitionASP.NET MVC ExtensionsAviva Solutions C# Coding GuidelinesMute4Most Active ProjectsCommunity Forums NNTP bridgeRawrpatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterGMap.NET - Great Maps for Windows Forms & PresentationN2 CMSStyleCopFarseer Physics Enginesmark C# LibraryMirror Testing System

  Read the article

• CodePlex Daily Summary for Tuesday, December 14, 2010

  CodePlex Daily Summary for Tuesday, December 14, 2010Popular ReleasesFlickrNet API Library: 3.1.4000: Newest release. Now contains dedicated Windows Phone 7 DLL as well as all previous DLLs. Also contains Windows Help file documentation now as standard.mojoPortal: 2.3.5.8: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2358-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Microsoft All-In-One Code Framework: Visual Studio 2010 Code Samples 2010-12-13: Code samples for Visual Studio 2010SuperWebSocket: SuperWebSocket Drop 2: Changes: based on SuperSocket 1.3 supported sub protocol supported SSL/TLS encryption (wss) in Sync socket mode fixed some data communication bugsSSH.NET Library: 2010.12.13: Fixes SFTP issue when you try to uploaded or download multiple files simultaneously. Usage example can be found hereRequest Tracker Data Access: 1.0.0.0: First releaseSQL Monitor: SQL Monitor 2.4: 1. auto adjust datagrids in query 2. disable activities related commands until activities tab is active.SuperSocket, an extensible socket application framework: SuperSocket 1.3 beta 1: SuperSocket 1.3 is built on .NET 4.0 framework. Bug fixes: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration value Third-part library upgrades: upgraded SuperSocket to .NET 4.0 upgraded EntLib 4.1 to 5.0 New features: supported UDP socket support custom protocol (can support binary protocol and other complecate...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.SwapWin: SwapWin 0.2: Updates: Bring all windows that are swapped to foreground. Make the window sent to primary screen active.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework（??） 2010?12??????！！http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?，???????ASP.NET, WinForm, Silverlight????12?Sample Code。???，??????????sample code。 ?????：http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??，??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????，??Email ????UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.New ProjectsAugmented Reality system in Soccer video: Augmented reality system and camera calibration system in soccer videos based on homography and vanishing points. Code generated with Visual C++ (best compiler is .net)Database Schema Provider: Database Schema Provider gets a database schema in unified format independent on the type of database. It uses ADO.NET data provider for Entity Framework. Dicke Bertha: Many many cool features... DNN Bookmark: DNN Bookmarks is a DNN module that aggregates the most popular social bookmarking tools and also allows you to bookmark your DNN web siteDough: Dough is a UI starter kit built using ASP.Net MVC and ExtJS. It's name comes from the concept of Amish friendship bread, a type of bread or cake made from a sourdough starter that is often shared in a manner similar to a chain letter.Garra - Gerenciador Financeiro: Garra é um sistema completo de controle financeiro: contas a pagar, contas a receber, investimentos, etc...ghcwp7: ghcwp7Hackathon - DotNetNuke Razor User Locator: The DotNetNuke Razor User Locator module demonstrates how Razor can be used to author DNN modules. This module shows where recent users to a web site came from based on their IP address. Hackathon. DotNetNuke Razor. Flickr Badge: Flickr badge desktop module allows you to display image thumbnails from Flickr and preview them inside DotNetNuke or on Flickr (controlled by module settings). Image thumbnails can be loaded by tag, user id, user group id, user set id and more.Hackathon: Razor Youtube Gallery: This is a DotNetNuke module which allows a website admin to add several relevant Youtube videos to a pane. The end user watches the selected Youtube video play, while scrolling through thumbnails of other videos to play those without refreshing the page. jQuery UI MVC3 Demo: Demo and possibly a skeleton for using jQuery UI in MVC3 (currently RC2).Microsoft Office Communicator History manager: Needs to save conversation history just on the local workstation (folder) then application could redstore it and show in simple window (mode) or user could open folder and lock on it manuallyMSTest Extensions - Msbuild: This project contains various msbuild tasks that extend helps with test execution using Mcrosoft testing frameworkRayCharlesTracer: this is a scholar project for a raytracer.Refunctor: F# interactive inside Reflector.Request Tracker Data Access: Best Practical RT (Request Tracker) data access .NET library for REST interface.SurfzApp: An application that does data mining on web resources of interest for Swedish windsurfers...Tesseract Solutions Corp. Data Access Base: Tesseract Data Access speeds up data access in .Net projects. Developed in C# .Net 4. It is a C#, class based ORM.TimBazinga EVoting: Undergrad project - designing an e-voting software system.Tiny Library CQRS: Tiny Library CQRS is a small demonstration project which demonstrates the concept of Domain Driven Design and the CQRS architecture pattern. This project relies on the Apworks DDD framework.Toptoys: toptoysWebGroup: WebGroup makes it easier for your website members to comunicate online. It work like Web IM + Forum + Twitter. It can be easily used in your current project. Developed in C#.WpfCustomChromeLibrary: WpfCustomChromeLibrary makes it easier to create WPF applications with custom chrome and caption buttons (min/max/close). You'll no longer have to do all the dirty work yourself in each application where you want a custom chrome. It's developed in XAML and C#.

  Read the article

• Run WordPress & Other Web Apps with Windows Web Platform

  - by Matthew Guay

  Would you like to run WordPress or other web apps on your PC so you can easily test and design websites?  Here we’ll look at how you can get the latest web apps on your computer in only a few quick steps. Many web apps today, such as WordPress, MediaWiki, and more, are open source and can be run for free from any computer with even a simple local web server.  They are often very difficult to install on your computer, since they require a number of dependencies such as PHP and MySQL.  Microsoft has worked to make this easier, releasing the Windows Web Platform Installer.  This lets you install many popular web apps and free tools in Windows with only a few clicks. Here we’re going to look at how to install WordPress and the free Visual Web Developer 2010 Express to edit web code with the Web Platform Installer.  But, if you’d rather install a different web app or tool, feel free to choose those as the installations are generally similar. Getting Started Head over to Microsoft’s Web development site and download the Web Platform Installer (link below).  This will download very quick, as it is just a small loader.  When you run this loader, it will download the Web Platform Installer files.  The Web Platform Installer works on XP, Vista, and Windows 7, as well as the related versions of Windows Server. After a couple moments, the Web Platform Installer will open and load information about the latest web offerings.    Now you can choose what you want to install.  You can quickly select the recommended products for several categories such as Web Server, Database, and more. Alternately, click Customize under the category and select exactly what you want to install.  Note that items already installed on your computer will be grayed out. We wanted to install Visual Web Developer 2010 Express, so select Customize under Tools, and select Visual Web Developer 2010 Express. Or, for more preset choices, select Options on the bottom of the window. You can choose to add Multimedia, Developer, and Enterprise tools to the lists, or add a new preset list from a feed. Choose Specific Web apps to Install We wanted to install WordPress, so instead of choosing a preset, select the Web Applications tab on the left.  Now you can choose from a variety of apps based on category, or you can view them all together in an A to Z, Most Popular, or Highest Rating list. Click the checkbox beside the app you want to install to select it, or click the “i” for more information. Here’s the More Information pane for WordPress.  If you’re ready to install it, click the checkbox. Now you can go back and add more web apps or tools to the install list if you like.  The Web Platform Installer will automatically find and select prerequisite apps such as MySQL, so you won’t need to worry about finding them. Once you’ve selected everything you want to install, click the Install button on the bottom of the window. The Web Platform Installer will now show you everything that’s selected, including components that it automatically selected.  Notice we only chose to install WordPress and Visual Web Developer 2010 Express, but it also has selected MySQL and PHP automatically.  Click I Accept to proceed. Enter an administrator password for MySQL before the setup begins. Now the Web Platform Installer will take over, automatically downloading, installing, and configuring all of your web apps.  It will also activate optional Windows components that may be needed on your computer.  This may take several minutes, depending on the components you selected and your internet speed.   Setting up Your Test Site Once the installation is finished, you’ll be asked to enter some information about your site.  You can simply accept the defaults or enter your own choices, and then click Continue. Now you’ll need to enter some information for your web apps.  When installing WordPress, you’ll need to choose a database and enter administrative usernames and passwords.  You may also be asked to enter extra information for additional security, but for a local-only test site this isn’t necessary.  Click Continue when you’re finished. You’ll need to wait a few more moments as it complete the setup of your web apps.  The good thing is, once it’s finished, they’ll be ready to go with only minimal configuration. And you’re finished!  The installer will let you know everything it installed, and if there were any problems.  In our test, Visual Web Developer 2010 Express failed to install successfully.  Often the problems may be with the download, so click Finish and then reselect the apps that didn’t install and run the installer again. Now you’re ready to run WordPress from your PC.  Click the Launch WordPress link or enter http://localhost:80/wordpress in your browser to get started. You’ll only have a little more setup to do on WordPress to get it running.  Once you’ve opened your WordPress page in your browser, enter a name for your blog and your email address, and click Install WordPress.   After a few seconds, you should see a Success! page with your username and a temporary password.  Copy the password, and then click Log In. Enter admin as the Username and paste the random generated password, and click Log In. WordPress will remind you to change the default password.  Click the Yes, Take me to my profile page link to do this. Enter something easier for you to remember, and click Update Profile. Now you’re ready to enjoy your new WordPress install on Windows.  You can add plugins and themes, and everything else you’d do with a normal WordPress site.  Here’s the dashboard running from localhost. And here’s the default blog running. Setting up Visual Web Developer 2010 Express As mentioned before, Visual Web Developer 2010 Express didn’t install correctly on our first try, but the second time it installed seamlessly.  Once it’s installed, launch it from your start menu as normal.  It may take a few minutes to load on the first run as it is finishing up setup. You may notice that the splash screen displayed while the program is loading says For Evaluation Purposes Only.  This is because you still need to register the program. You have 30 days to register the program, but let’s go ahead and do it to get this step out of the way.  Click Help in the menu bar, and select Register Product. Click Obtain a registration key online in the popup window. You’ll need to sign in with your Windows Live ID, and then fill out a quick form. When you’re done, copy the registration key displayed and paste it into the registration dialog in Visual Web Developer.   Now you’ve got a registered, free web development program with full standards compliance and IntelliSense to help you work smarter and faster.  And it works great with your local web apps, so you can create, tweak, and then deploy, all from your desktop with this simple installer! Install More Apps You can always run the Web Platform Installer again in the future and add more apps if you’d like.  The install adds a link to the Installer in the Start menu; just run it and repeat the steps above with your new selections. Also, from the installer, you can cleanup the setup files downloaded during the installation if you want.  Click the Options link in the bottom of the window, and then scroll down and select Delete installer cache folder. Uninstalling the apps is not as easy, unfortunately.  If you wish to uninstall the Web Platform Installer and everything you installed with it, you’ll need to uninstall each item individually.  One easy way to see what was all installed together is to sort the entries in Uninstall Programs by date.  In our case, we also installed some other applications on the same day, but it’s easier to see what was installed together. Or if you are not a fan of using Programs and Features to uninstall them, try out a program like Revo Uninstaller Pro. Conclusion Whether you’re a full-time web developer or just enjoy testing out the latest web apps, the Web Platform Installer makes it quick and easy to get your computer loaded up with the latest bits.  In fact, it’s easier to install these tools with all their dependencies than it is to install many standard boxed programs. If you’d like to take your web server anywhere you go and not have it confined to your desktop, then check out our article on how to Turn Your Flashdrive into a Portable Webserver. Link Download the Microsoft Web Platform Installer Similar Articles Productive Geek Tips Linux QuickTip: Downloading and Un-tarring in One StepQuick Tip: Set a Future Date for a Post in WordPressHow-To Geek SoftwareAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow-To Geek Software: WordPress Comment Moderation Notifier TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials 21 Cursor Packs for XP, Vista & 7

  Read the article

• Project Navigation and File Nesting in ASP.NET MVC Projects

  - by Rick Strahl

  More and more I’m finding myself getting lost in the files in some of my larger Web projects. There’s so much freaking content to deal with – HTML Views, several derived CSS pages, page level CSS, script libraries, application wide scripts and page specific script files etc. etc. Thankfully I use Resharper and the Ctrl-T Go to Anything which autocompletes you to any file, type, member rapidly. Awesome except when I forget – or when I’m not quite sure of the name of what I’m looking for. Project navigation is still important. Sometimes while working on a project I seem to have 30 or more files open and trying to locate another new file to open in the solution often ends up being a mental exercise – “where did I put that thing?” It’s those little hesitations that tend to get in the way of workflow frequently. To make things worse most NuGet packages for client side frameworks and scripts, dump stuff into folders that I generally don’t use. I’ve never been a fan of the ‘Content’ folder in MVC which is just an empty layer that doesn’t serve much of a purpose. It’s usually the first thing I nuke in every MVC project. To me the project root is where the actual content for a site goes – is there really a need to add another folder to force another path into every resource you use? It’s ugly and also inefficient as it adds additional bytes to every resource link you embed into a page. Alternatives I’ve been playing around with different folder layouts recently and found that moving my cheese around has actually made project navigation much easier. In this post I show a couple of things I’ve found useful and maybe you find some of these useful as well or at least get some ideas what can be changed to provide better project flow. The first thing I’ve been doing is add a root Code folder and putting all server code into that. I’m a big fan of treating the Web project root folder as my Web root folder so all content comes from the root without unneeded nesting like the Content folder. By moving all server code out of the root tree (except for Code) the root tree becomes a lot cleaner immediately as you remove Controllers, App_Start, Models etc. and move them underneath Code. Yes this adds another folder level for server code, but it leaves only code related things in one place that’s easier to jump back and forth in. Additionally I find myself doing a lot less with server side code these days, more with client side code so I want the server code separated from that. The root folder itself then serves as the root content folder. Specifically I have the Views folder below it, as well as the Css and Scripts folders which serve to hold only common libraries and global CSS and Scripts code. These days of building SPA style application, I also tend to have an App folder there where I keep my application specific JavaScript files, as well as HTML View templates for client SPA apps like Angular. Here’s an example of what this looks like in a relatively small project: The goal is to keep things that are related together, so I don’t end up jumping around so much in the solution to get to specific project items. The Code folder may irk some of you and hark back to the days of the App_Code folder in non Web-Application projects, but these days I find myself messing with a lot less server side code and much more with client side files – HTML, CSS and JavaScript. Generally I work on a single controller at a time – once that’s open it’s open that’s typically the only server code I work with regularily. Business logic lives in another project altogether, so other than the controller and maybe ViewModels there’s not a lot of code being accessed in the Code folder. So throwing that off the root and isolating seems like an easy win. Nesting Page specific content In a lot of my existing applications that are pure server side MVC application perhaps with some JavaScript associated with them , I tend to have page level javascript and css files. For these types of pages I actually prefer the local files stored in the same folder as the parent view. So typically I have a .css and .js files with the same name as the view in the same folder. This looks something like this: In order for this to work you have to also make a configuration change inside of the /Views/web.config file, as the Views folder is blocked with the BlockViewHandler that prohibits access to content from that folder. It’s easy to fix by changing the path from * to *.cshtml or *.vbhtml so that view retrieval is blocked:<system.webServer> <handlers> <remove name="BlockViewHandler"/> <add name="BlockViewHandler" path="*.cshtml" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler" /> </handlers> </system.webServer> With this in place, from inside of your Views you can then reference those same resources like this:<link href="~/Views/Admin/QuizPrognosisItems.css" rel="stylesheet" /> and<script src="~/Views/Admin/QuizPrognosisItems.js"></script> which works fine. JavaScript and CSS files in the Views folder deploy just like the .cshtml files do and can be referenced from this folder as well. Making this happen is not really as straightforward as it should be with just Visual Studio unfortunately, as there’s no easy way to get the file nesting from the VS IDE directly (you have to modify the .csproj file). However, Mads Kristensen has a nice Visual Studio Add-in that provides file nesting via a short cut menu option. Using this you can select each of the ‘child’ files and then nest them under a parent file. In the case above I select the .js and .css files and nest them underneath the .cshtml view. I was even toying with the idea of throwing the controller.cs files into the Views folder, but that’s maybe going a little too far :-) It would work however as Visual Studio doesn’t publish .cs files and the compiler doesn’t care where the files live. There are lots of options and if you think that would make life easier it’s another option to help group related things together. Are there any downside to this? Possibly – if you’re using automated minification/packaging tools like ASP.NET Bundling or Grunt/Gulp with Uglify, it becomes a little harder to group script and css files for minification as you may end up looking in multiple folders instead of a single folder. But – again that’s a one time configuration step that’s easily handled and much less intrusive then constantly having to search for files in your project. Client Side Folders The particular project shown above in the screen shots above is a traditional server side ASP.NET MVC application with most content rendered into server side Razor pages. There’s a fair amount of client side stuff happening on these pages as well – specifically several of these pages are self contained single page Angular applications that deal with 1 or maybe 2 separate views and the layout I’ve shown above really focuses on the server side aspect where there are Razor views with related script and css resources. For applications that are more client centric and have a lot more script and HTML template based content I tend to use the same layout for the server components, but the client side code can often be broken out differently. In SPA type applications I tend to follow the App folder approach where all the application pieces that make the SPA applications end up below the App folder. Here’s what that looks like for me – here this is an AngularJs project: In this case the App folder holds both the application specific js files, and the partial HTML views that get loaded into this single SPA page application. In this particular Angular SPA application that has controllers linked to particular partial views, I prefer to keep the script files that are associated with the views – Angular Js Controllers in this case – with the actual partials. Again I like the proximity of the view with the main code associated with the view, because 90% of the UI application code that gets written is handled between these two files. This approach works well, but only if controllers are fairly closely aligned with the partials. If you have many smaller sub-controllers or lots of directives where the alignment between views and code is more segmented this approach starts falling apart and you’ll probably be better off with separate folders in js folder. Following Angular conventions you’d have controllers/directives/services etc. folders. Please note that I’m not saying any of these ways are right or wrong  – this is just what has worked for me and why! Skipping Project Navigation altogether with Resharper I’ve talked a bit about project navigation in the project tree, which is a common way to navigate and which we all use at least some of the time, but if you use a tool like Resharper – which has Ctrl-T to jump to anything, you can quickly navigate with a shortcut key and autocomplete search. Here’s what Resharper’s jump to anything looks like: Resharper’s Goto Anything box lets you type and quick search over files, classes and members of the entire solution which is a very fast and powerful way to find what you’re looking for in your project, by passing the solution explorer altogether. As long as you remember to use (which I sometimes don’t) and you know what you’re looking for it’s by far the quickest way to find things in a project. It’s a shame that this sort of a simple search interface isn’t part of the native Visual Studio IDE. Work how you like to work Ultimately it all comes down to workflow and how you like to work, and what makes *you* more productive. Following pre-defined patterns is great for consistency, as long as they don’t get in the way you work. A lot of the default folder structures in Visual Studio for ASP.NET MVC were defined when things were done differently. These days we’re dealing with a lot more diverse project content than when ASP.NET MVC was originally introduced and project organization definitely is something that can get in the way if it doesn’t fit your workflow. So take a look and see what works well and what might benefit from organizing files differently. As so many things with ASP.NET, as things evolve and tend to get more complex I’ve found that I end up fighting some of the conventions. The good news is that you don’t have to follow the conventions and you have the freedom to do just about anything that works for you. Even though what I’ve shown here diverges from conventions, I don’t think anybody would stumble over these relatively minor changes and not immediately figure out where things live, even in larger projects. But nevertheless think long and hard before breaking those conventions – if there isn’t a good reason to break them or the changes don’t provide improved workflow then it’s not worth it. Break the rules, but only if there’s a quantifiable benefit. You may not agree with how I’ve chosen to divert from the standard project structures in this article, but maybe it gives you some ideas of how you can mix things up to make your existing project flow a little nicer and make it easier to navigate for your environment. © Rick Strahl, West Wind Technologies, 2005-2014Posted in ASP.NET  MVC   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

  Read the article

• CodePlex Daily Summary for Monday, April 19, 2010

  CodePlex Daily Summary for Monday, April 19, 2010New Projects8085 Microprocessor simulator: This program allows you to write 8085 programs in assembly and run those programs on your PC. It comes with lots of help, plus you can put breakpo...Additional.NET framework: The Additional.Net framework extends the functionality of the .NET framework for easier application development. It is developed in C#.Astoria Contrib: A contrib project for filling the gaps in WCF Data Services, providing missing functionality or augmenting with T4 templates, helpers, etc.ClipoWeb: ClipoWeb is a web clipboard that allows you to copy text and files between computers. Users access a web page on the source and destination compute...elearning Center: Đây là một ứng dụng web viết hoàn toàn bằng Sliverlight. Ứng dụng này là một dạng elearning với đầy đủ chức năng và có khả năng tương tác tối đa v...Excel VSTO SQL Server Browser: Get Data from SQL Server and put it in Excel directly. The objective is to get more control about what do you need to pull and create automatic pro...Generic Tree Structure: Generic Base Classes that helps you to create complex tree structures without writing it again and again. Simply to use Like "var Node<Folder> fold...LAN Lordz LAN Party System: The LAN Lordz LAN Party System makes it easier for medium and large size events to track their attendance, sponsors, door prizes, tournaments, and...LiteFx: O LiteFx é um framework que ajuda na implementação de DDD (anêmico ou rico) ele foi desenvolvido por Douglas Aguiar (http://twitter.com/DouglasAgui...Managed UI Flow for ASP.NET MVC Framework: If your web application getting more complex, understanding and managing of complex UI flows(pageflow of application) getting harder and harder, If...Meus Exemplos: Meus ExemplosOrchard Blueprint Theme: Orchard BluePrint is a project that provides a WYSIWYG reference implementation of a Orchard theme to help designers get started with theme design....Outlook Social Network Connector - Avatar: Avatar 是一个开源的MS Outlook的插件，豆瓣用户可以在Outlook 2010中使用豆瓣。查看一封邮件中相关的收件人、发件人的用户广播、同城活动以及豆邮。不用上豆瓣也能方便了解好友动态。这个插件使用C#， .NET 4.0 开发。API 请求认证使用OAuth 认证。 (Avat...Quadro Tree: This is Quadri tree library.Sharepoint 2010 Alert Controller: In MOSS 2007 or Sharepoint Server 2010 if you want to see your alerts by list name you should use this tool.SharePoint Web Parts: The goal of this project is to develop a set of web parts for SharePoint.Silverlight Image Cropper: This is a silverlight 4 util that makes it easy to crop out a number images of a specific resolution screen or screens. ie. an easy way to crop ...SilverlightFTP: Silverlight ftp clientsplibex: libraries for sharepoint lists manipulationStardustExtensions: Official Extensions for StardustSwim Team Manager: Swim Team Manager is designed for managing and tracking administrative and performance information for your club, school, or swim team. Swim Tea...ToDoListWpf: A To Do List, I used it to manage my work items. I am sorry for my poor English.Trance Layer: TranceLayer is a fast and flexible logging or diagnostics framework for .Net. It allows you to plug it into an existing or new application with m...Unoficcial NeoFM.hu NowPlaying: A little windows tray program. Shows what's on neofm.hu right now.WabbitStudio Z80 Software Tools: The software suite provides all of the tools you need to create high quality Z80 software in Z80 assembly language, with a focus on TI calculators....WinToolbar: Windows.Toolbar is Silverlight library that implements common widgets that allows us to build a rich toolbar control in our applications, it incor...XP-More: XP-More is a tool that helps manage Windows 7 Virtual Machines (XP Mode and any other). Specifically, it makes duplication of VMs a no brainer - no...Yodelay .NET Framework Extensions: The Yodelay .NET Framework Extensions project provides a library of components that make many kinds of programming tasks simpler. These include bas...New ReleasesClipoWeb: ClipoWeb 1.0: First Beta release of the ClipoWeb web applicationDDDSample.Net: 0.8: This release contains all four versions of DDDSample.Net available in previous, 0.7 and a brand new one: Layered Model version. Layered Model demon...DotNetNuke Blueprint: 00.00.02: Added to this version CSS Reset Skin version including Grids This version will soon be updated with corresponding HTML version and DNN templateEsferatec.Text.RegularExpressions: 3.5.1003.1001: first stable release of the class; the assembly file is ready to use, the documentation is complete;Excel VSTO SQL Server Browser: Sample Only: Sample without Ribbon UI, if you close the TaskPane you will no longer able to open it without restart ExcelFolder Bookmarks: Folder Bookmarks 1.5.5: This is the latest version of Folder Bookmarks (1.5.5), with the new Archive Manager and Archive Viewer. It has an installer - it will create a dir...Gardens Point LEX: Gardens Point LEX, Version 1.1.3: The main distribution is a zip file. This contains the binary executable, documentation, source code and the examples. ChangesVersion 1.1.3 corre...Gardens Point Parser Generator: Gardens Point Parser Generator V1.4.0: The distribution is a zip archive which contains the binary executables, documentation, source code and examples. ChangesVersion 1.4.0 of GPPG has...HKGolden Express: HKGoldenExpress (Build 201004181455): New features: Added rating of each topic. (Note: This feature is availabe since Build 201004172120) Bug fix: Handle invalid XML character in XML...Home Access Plus+: v4.0.0.0 Beta: v4.0.0.0 Beta Change Log: Moved to using .net 4.0 New Silverlight Uploader Various .net 4 fixes and tweaks File Changes: All fixes have changedHTML Ruby: 6.21.6: Reduced performance hit on pages with heavy DOM manipulations Fixed issue where empty tags caused it to apply invalid spacing values Stop spaci...LINQ to VFP: LinqToVfp (v1.0.17.2): Modified to allow using RecNo as a primary key. This build requires IQToolkit v0.17b.Managed UI Flow for ASP.NET MVC Framework: Preview 1: The source available on this site, does not reflect the final state of the project, it is a preview of what will be shipping in the framework in th...MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (2): Super minor update to accommodate the new Blend 4 RC. Only changes: The path to the Blend 4 templates changed to be "My Documents\Expression\Blend...N2 CMS: 2.0 rc: N2 is a lightweight CMS framework for ASP.NET. It helps you build great web sites that anyone can update. Major Changes (1.5 -> 2.0 release candid...OpenGL ES 2.0 Compact Framework Wrapper: Sample application CAB with texturing: This took some time as it was pretty hard to get the texture loaded and setup so that it would bind to the sampler2D in the fragment shader. Featu...Orchard Blueprint Theme: 00.00.01: This is the first release of this project, still in a very alpha version. Very soon this release is to be updated with the HTML version of the them...RoughJs: RoughJsSL: This is Silverlight library's CompilerSharepoint 2010 Alert Controller: Sharepoint 2010 Alert Controller: After you download WSP file you can get help from Home PageSharePoint LogViewer: SharePoint LogViewer 2.5: Minimize log viewer to tray Get popup notification of SharePoint log events from tray Redirect log entries to event log Send email notifications on...Site Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): v1.1: This is a minor update which includes the following changes: Code consolidation across the whole project Additional site data captured. See solut...Stardust: Stardust 1.0: First stable version of Stardust (Build 172)StardustExtensions: Facebook Extension: Extension for stardust to upload and post images on Facebook.StardustExtensions: Facebook Extension (Source): The source code of an extension for Stardust used to post images on facebook.StardustExtensions: WPF Example: This is an example extension. Uses WPF to create a Window and say "Hello World!" Is a perfect download if want to start writing Stardust ExtensionsStardustExtensions: WPF Example Source: This is the source code of an extension that creates a Window using WPF & displays a simple text. Is great as an example of creating Stardust Exten...TFTP Server: TFTP Server 1.1 Beta installer: New MSI based installer Installs a TFTP service Supports multiple servers on different endpoints, with every server pointing to its own root di...TiledLib: TiledLib 1.1: This download is for prebuilt DLLs and a demo project. For the full source code, use the Source Code tab. Changes: Bug fixes in a few methods Ad...Trance Layer: TranceLayer Digger: Digger version is a beta. It is intended to be used as a demonstration of muscles while lacking a set of features that are in the docs. The set of ...uManage - Active Directory Self-Service Portal: uManage v1.2 (.NET 4.0 RTM): New Releasev1.2 Adds the Administrative Portal as well as the requirement of a MSSQL database (2005+). The Setup Wizard has also been updated to i...Unoficcial NeoFM.hu NowPlaying: NeoNotifier: First release. Aplha, but usable.VidCoder: 0.2.1: Changes: Added 2-pass encoding Fixed x264 options getting mangled during p-invoke Fixed intermittent crash with logging window open due to thre...WCF RIA Services Contrib: WCF RIA Services Contrib RC2 Release: This version is for the WCF RIA Services RC2 (SL4 RTM) release. The ApplyState has been modifed in this version to disable validation during proces...WiiCIS.NET: WiiCIS.NET v0.2: Changes... - Removal of WiimoteManager, connection must be done manually - Accelerometer orientation was originally in degrees, is now in radians -...WinToolbar: WinToolbar Source code plus sample: This zip file contains the current version source code and libraries plus a testrunner (sample app).XP-More: 0.9 (Beta): Most of the functionality is in place, final polishing will be done soon.Most Popular ProjectsFacebook Developer ToolkitWSPBuilder (SharePoint WSP tool)QuickGraph, Graph Data Structures And Algorithms for .NetPerformance Analysis of Logs (PAL) Toolpatterns & practices: Team Development with Visual Studio Team Foundation ServerTFS Integration Platformpatterns & practices: Performance Testing Guidance for Web Applicationspatterns & practices: Enterprise Library ContribJSON ViewerManaged Wifi APIMost Active ProjectsRawrpatterns & practices – Enterprise LibraryIndustrial DashboardIonics Isapi Rewrite FilterFarseer Physics EngineMVVM Light ToolkitjQuery Library for SharePoint Web ServicesN2 CMSCaliburn: An Application Framework for WPF and SilverlightBlogEngine.NET

  Read the article

• Uploading and Importing CSV file to SQL Server in ASP.NET WebForms

  - by Vincent Maverick Durano

  Few weeks ago I was working with a small internal project  that involves importing CSV file to Sql Server database and thought I'd share the simple implementation that I did on the project. In this post I will demonstrate how to upload and import CSV file to SQL Server database. As some may have already know, importing CSV file to SQL Server is easy and simple but difficulties arise when the CSV file contains, many columns with different data types. Basically, the provider cannot differentiate data types between the columns or the rows, blindly it will consider them as a data type based on first few rows and leave all the data which does not match the data type. To overcome this problem, I used schema.ini file to define the data type of the CSV file and allow the provider to read that and recognize the exact data types of each column. Now what is schema.ini? Taken from the documentation: The Schema.ini is a information file, used to define the data structure and format of each column that contains data in the CSV file. If schema.ini file exists in the directory, Microsoft.Jet.OLEDB provider automatically reads it and recognizes the data type information of each column in the CSV file. Thus, the provider intelligently avoids the misinterpretation of data types before inserting the data into the database. For more information see: http://msdn.microsoft.com/en-us/library/ms709353%28VS.85%29.aspx Points to remember before creating schema.ini:   1. The schema information file, must always named as 'schema.ini'.   2. The schema.ini file must be kept in the same directory where the CSV file exists.   3. The schema.ini file must be created before reading the CSV file.   4. The first line of the schema.ini, must the name of the CSV file, followed by the properties of the CSV file, and then the properties of the each column in the CSV file. Here's an example of how the schema looked like: [Employee.csv] ColNameHeader=False Format=CSVDelimited DateTimeFormat=dd-MMM-yyyy Col1=EmployeeID Long Col2=EmployeeFirstName Text Width 100 Col3=EmployeeLastName Text Width 50 Col4=EmployeeEmailAddress Text Width 50 To get started lets's go a head and create a simple blank database. Just for the purpose of this demo I created a database called TestDB. After creating the database then lets go a head and fire up Visual Studio and then create a new WebApplication project. Under the root application create a folder called UploadedCSVFiles and then place the schema.ini on that folder. The uploaded CSV files will be stored in this folder after the user imports the file. Now add a WebForm in the project and set up the HTML mark up and add one (1) FileUpload control one(1)Button and three (3) Label controls. After that we can now proceed with the codes for uploading and importing the CSV file to SQL Server database. Here are the full code blocks below: 1: using System; 2: using System.Data; 3: using System.Data.SqlClient; 4: using System.Data.OleDb; 5: using System.IO; 6: using System.Text; 7:   8: namespace WebApplication1 9: { 10: public partial class CSVToSQLImporting : System.Web.UI.Page 11: { 12: private string GetConnectionString() 13: { 14: return System.Configuration.ConfigurationManager.ConnectionStrings["DBConnectionString"].ConnectionString; 15: } 16: private void CreateDatabaseTable(DataTable dt, string tableName) 17: { 18:   19: string sqlQuery = string.Empty; 20: string sqlDBType = string.Empty; 21: string dataType = string.Empty; 22: int maxLength = 0; 23: StringBuilder sb = new StringBuilder(); 24:   25: sb.AppendFormat(string.Format("CREATE TABLE {0} (", tableName)); 26:   27: for (int i = 0; i < dt.Columns.Count; i++) 28: { 29: dataType = dt.Columns[i].DataType.ToString(); 30: if (dataType == "System.Int32") 31: { 32: sqlDBType = "INT"; 33: } 34: else if (dataType == "System.String") 35: { 36: sqlDBType = "NVARCHAR"; 37: maxLength = dt.Columns[i].MaxLength; 38: } 39:   40: if (maxLength > 0) 41: { 42: sb.AppendFormat(string.Format(" {0} {1} ({2}), ", dt.Columns[i].ColumnName, sqlDBType, maxLength)); 43: } 44: else 45: { 46: sb.AppendFormat(string.Format(" {0} {1}, ", dt.Columns[i].ColumnName, sqlDBType)); 47: } 48: } 49:   50: sqlQuery = sb.ToString(); 51: sqlQuery = sqlQuery.Trim().TrimEnd(','); 52: sqlQuery = sqlQuery + " )"; 53:   54: using (SqlConnection sqlConn = new SqlConnection(GetConnectionString())) 55: { 56: sqlConn.Open(); 57: SqlCommand sqlCmd = new SqlCommand(sqlQuery, sqlConn); 58: sqlCmd.ExecuteNonQuery(); 59: sqlConn.Close(); 60: } 61:   62: } 63: private void LoadDataToDatabase(string tableName, string fileFullPath, string delimeter) 64: { 65: string sqlQuery = string.Empty; 66: StringBuilder sb = new StringBuilder(); 67:   68: sb.AppendFormat(string.Format("BULK INSERT {0} ", tableName)); 69: sb.AppendFormat(string.Format(" FROM '{0}'", fileFullPath)); 70: sb.AppendFormat(string.Format(" WITH ( FIELDTERMINATOR = '{0}' , ROWTERMINATOR = '\n' )", delimeter)); 71:   72: sqlQuery = sb.ToString(); 73:   74: using (SqlConnection sqlConn = new SqlConnection(GetConnectionString())) 75: { 76: sqlConn.Open(); 77: SqlCommand sqlCmd = new SqlCommand(sqlQuery, sqlConn); 78: sqlCmd.ExecuteNonQuery(); 79: sqlConn.Close(); 80: } 81: } 82: protected void Page_Load(object sender, EventArgs e) 83: { 84:   85: } 86: protected void BTNImport_Click(object sender, EventArgs e) 87: { 88: if (FileUpload1.HasFile) 89: { 90: FileInfo fileInfo = new FileInfo(FileUpload1.PostedFile.FileName); 91: if (fileInfo.Name.Contains(".csv")) 92: { 93:   94: string fileName = fileInfo.Name.Replace(".csv", "").ToString(); 95: string csvFilePath = Server.MapPath("UploadedCSVFiles") + "\\" + fileInfo.Name; 96:   97: //Save the CSV file in the Server inside 'MyCSVFolder' 98: FileUpload1.SaveAs(csvFilePath); 99:   100: //Fetch the location of CSV file 101: string filePath = Server.MapPath("UploadedCSVFiles") + "\\"; 102: string strSql = "SELECT * FROM [" + fileInfo.Name + "]"; 103: string strCSVConnString = "Provider=Microsoft.Jet.OLEDB.4.0;Data Source=" + filePath + ";" + "Extended Properties='text;HDR=YES;'"; 104:   105: // load the data from CSV to DataTable 106:   107: OleDbDataAdapter adapter = new OleDbDataAdapter(strSql, strCSVConnString); 108: DataTable dtCSV = new DataTable(); 109: DataTable dtSchema = new DataTable(); 110:   111: adapter.FillSchema(dtCSV, SchemaType.Mapped); 112: adapter.Fill(dtCSV); 113:   114: if (dtCSV.Rows.Count > 0) 115: { 116: CreateDatabaseTable(dtCSV, fileName); 117: Label2.Text = string.Format("The table ({0}) has been successfully created to the database.", fileName); 118:   119: string fileFullPath = filePath + fileInfo.Name; 120: LoadDataToDatabase(fileName, fileFullPath, ","); 121:   122: Label1.Text = string.Format("({0}) records has been loaded to the table {1}.", dtCSV.Rows.Count, fileName); 123: } 124: else 125: { 126: LBLError.Text = "File is empty."; 127: } 128: } 129: else 130: { 131: LBLError.Text = "Unable to recognize file."; 132: } 133:   134: } 135: } 136: } 137: } The code above consists of three (3) private methods which are the GetConnectionString(), CreateDatabaseTable() and LoadDataToDatabase(). The GetConnectionString() is a method that returns a string. This method basically gets the connection string that is configured in the web.config file. The CreateDatabaseTable() is method that accepts two (2) parameters which are the DataTable and the filename. As the method name already suggested, this method automatically create a Table to the database based on the source DataTable and the filename of the CSV file. The LoadDataToDatabase() is a method that accepts three (3) parameters which are the tableName, fileFullPath and delimeter value. This method is where the actual saving or importing of data from CSV to SQL server happend. The codes at BTNImport_Click event handles the uploading of CSV file to the specified location and at the same time this is where the CreateDatabaseTable() and LoadDataToDatabase() are being called. If you notice I also added some basic trappings and validations within that event. Now to test the importing utility then let's create a simple data in a CSV format. Just for the simplicity of this demo let's create a CSV file and name it as "Employee" and add some data on it. Here's an example below: 1,VMS,Durano,[email protected] 2,Jennifer,Cortes,[email protected] 3,Xhaiden,Durano,[email protected] 4,Angel,Santos,[email protected] 5,Kier,Binks,[email protected] 6,Erika,Bird,[email protected] 7,Vianne,Durano,[email protected] 8,Lilibeth,Tree,[email protected] 9,Bon,Bolger,[email protected] 10,Brian,Jones,[email protected] Now save the newly created CSV file in some location in your hard drive. Okay let's run the application and browse the CSV file that we have just created. Take a look at the sample screen shots below: After browsing the CSV file. After clicking the Import Button Now if we look at the database that we have created earlier you'll notice that the Employee table is created with the imported data on it. See below screen shot.   That's it! I hope someone find this post useful! Technorati Tags: ASP.NET,CSV,SQL,C#,ADO.NET

  Read the article

• Move Files from a Failing PC with an Ubuntu Live CD

  - by Trevor Bekolay

  You’ve loaded the Ubuntu Live CD to salvage files from a failing system, but where do you store the recovered files? We’ll show you how to store them on external drives, drives on the same PC, a Windows home network, and other locations. We’ve shown you how to recover data like a forensics expert, but you can’t store recovered files back on your failed hard drive! There are lots of ways to transfer the files you access from an Ubuntu Live CD to a place that a stable Windows machine can access them. We’ll go through several methods, starting each section from the Ubuntu desktop – if you don’t yet have an Ubuntu Live CD, follow our guide to creating a bootable USB flash drive, and then our instructions for booting into Ubuntu. If your BIOS doesn’t let you boot using a USB flash drive, don’t worry, we’ve got you covered! Use a Healthy Hard Drive If your computer has more than one hard drive, or your hard drive is healthy and you’re in Ubuntu for non-recovery reasons, then accessing your hard drive is easy as pie, even if the hard drive is formatted for Windows. To access a hard drive, it must first be mounted. To mount a healthy hard drive, you just have to select it from the Places menu at the top-left of the screen. You will have to identify your hard drive by its size. Clicking on the appropriate hard drive mounts it, and opens it in a file browser. You can now move files to this hard drive by drag-and-drop or copy-and-paste, both of which are done the same way they’re done in Windows. Once a hard drive, or other external storage device, is mounted, it will show up in the /media directory. To see a list of currently mounted storage devices, navigate to /media by clicking on File System in a File Browser window, and then double-clicking on the media folder. Right now, our media folder contains links to the hard drive, which Ubuntu has assigned a terribly uninformative label, and the PLoP Boot Manager CD that is currently in the CD-ROM drive. Connect a USB Hard Drive or Flash Drive An external USB hard drive gives you the advantage of portability, and is still large enough to store an entire hard disk dump, if need be. Flash drives are also very quick and easy to connect, though they are limited in how much they can store. When you plug a USB hard drive or flash drive in, Ubuntu should automatically detect it and mount it. It may even open it in a File Browser automatically. Since it’s been mounted, you will also see it show up on the desktop, and in the /media folder. Once it’s been mounted, you can access it and store files on it like you would any other folder in Ubuntu. If, for whatever reason, it doesn’t mount automatically, click on Places in the top-left of your screen and select your USB device. If it does not show up in the Places list, then you may need to format your USB drive. To properly remove the USB drive when you’re done moving files, right click on the desktop icon or the folder in /media and select Safely Remove Drive. If you’re not given that option, then Eject or Unmount will effectively do the same thing. Connect to a Windows PC on your Local Network If you have another PC or a laptop connected through the same router (wired or wireless) then you can transfer files over the network relatively quickly. To do this, we will share one or more folders from the machine booted up with the Ubuntu Live CD over the network, letting our Windows PC grab the files contained in that folder. As an example, we’re going to share a folder on the desktop called ToShare. Right-click on the folder you want to share, and click Sharing Options. A Folder Sharing window will pop up. Check the box labeled Share this folder. A window will pop up about the sharing service. Click the Install service button. Some files will be downloaded, and then installed. When they’re done installing, you’ll be appropriately notified. You will be prompted to restart your session. Don’t worry, this won’t actually log you out, so go ahead and press the Restart session button. The Folder Sharing window returns, with Share this folder now checked. Edit the Share name if you’d like, and add checkmarks in the two checkboxes below the text fields. Click Create Share. Nautilus will ask your permission to add some permissions to the folder you want to share. Allow it to Add the permissions automatically. The folder is now shared, as evidenced by the new arrows above the folder’s icon. At this point, you are done with the Ubuntu machine. Head to your Windows PC, and open up Windows Explorer. Click on Network in the list on the left, and you should see a machine called UBUNTU in the right pane. Note: This example is shown in Windows 7; the same steps should work for Windows XP and Vista, but we have not tested them. Double-click on UBUNTU, and you will see the folder you shared earlier! As well as any other folders you’ve shared from Ubuntu. Double click on the folder you want to access, and from there, you can move the files from the machine booted with Ubuntu to your Windows PC. Upload to an Online Service There are many services online that will allow you to upload files, either temporarily or permanently. As long as you aren’t transferring an entire hard drive, these services should allow you to transfer your important files from the Ubuntu environment to any other machine with Internet access. We recommend compressing the files that you want to move, both to save a little bit of bandwidth, and to save time clicking on files, as uploading a single file will be much less work than a ton of little files. To compress one or more files or folders, select them, and then right-click on one of the members of the group. Click Compress…. Give the compressed file a suitable name, and then select a compression format. We’re using .zip because we can open it anywhere, and the compression rate is acceptable. Click Create and the compressed file will show up in the location selected in the Compress window. Dropbox If you have a Dropbox account, then you can easily upload files from the Ubuntu environment to Dropbox. There is no explicit limit on the size of file that can be uploaded to Dropbox, though a free account begins with a total limit of 2 GB of files in total. Access your account through Firefox, which can be opened by clicking on the Firefox logo to the right of the System menu at the top of the screen. Once into your account, press the Upload button on top of the main file list. Because Flash is not installed in the Live CD environment, you will have to switch to the basic uploader. Click Browse…find your compressed file, and then click Upload file. Depending on the size of the file, this could take some time. However, once the file has been uploaded, it should show up on any computer connected through Dropbox in a matter of minutes. Google Docs Google Docs allows the upload of any type of file – making it an ideal place to upload files that we want to access from another computer. While your total allocation of space varies (mine is around 7.5 GB), there is a per-file maximum of 1 GB. Log into Google Docs, and click on the Upload button at the top left of the page. Click Select files to upload and select your compressed file. For safety’s sake, uncheck the checkbox concerning converting files to Google Docs format, and then click Start upload. Go Online – Through FTP If you have access to an FTP server – perhaps through your web hosting company, or you’ve set up an FTP server on a different machine – you can easily access the FTP server in Ubuntu and transfer files. Just make sure you don’t go over your quota if you have one. You will need to know the address of the FTP server, as well as the login information. Click on Places > Connect to Server… Choose the FTP (with login) Service type, and fill in your information. Adding a bookmark is optional, but recommended. You will be asked for your password. You can choose to remember it until you logout, or indefinitely. You can now browse your FTP server just like any other folder. Drop files into the FTP server and you can retrieve them from any computer with an Internet connection and an FTP client. Conclusion While at first the Ubuntu Live CD environment may seem claustrophobic, it has a wealth of options for connecting to peripheral devices, local computers, and machines on the Internet – and this article has only scratched the surface. Whatever the storage medium, Ubuntu’s got an interface for it! Similar Articles Productive Geek Tips Backup Your Windows Live Writer SettingsMove a Window Without Clicking the Titlebar in UbuntuRecover Deleted Files on an NTFS Hard Drive from a Ubuntu Live CDCreate a Bootable Ubuntu USB Flash Drive the Easy WayReset Your Ubuntu Password Easily from the Live CD TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals

  Read the article

• Dotfuscator Deep Dive with WP7

  - by Bil Simser

  I thought I would share some experience with code obfuscation (specifically the Dotfuscator product) and Windows Phone 7 apps. These days twitter is a buzz with black hat and white operations coming out about how the marketplace is insecure and Microsoft failed, blah, blah, blah. So it’s that much more important to protect your intellectual property. You should protect it no matter what when releasing apps into the wild but more so when someone is paying for them. You want to protect the time and effort that went into your code and have some comfort that the casual hacker isn’t going to usurp your next best thing. Enter code obfuscation. Code obfuscation is one tool that can help protect your IP. Basically it goes into your compiled assemblies, rewrites things at an IL level (like renaming methods and classes and hiding logic flow) and rewrites it back so that the assembly or executable is still fully functional but prying eyes using a tool like ILDASM or Reflector can’t see what’s going on.  You can read more about code obfuscation here on Wikipedia. A word to the wise. Code obfuscation isn’t 100% secure. More so on the WP7 platform where the OS expects certain things to be as they were meant to be. So don’t expect 100% obfuscation of every class and every method and every property. It’s just not going to happen. What this does do is give you some level of protection but don’t put all your eggs in one basket and call it done. Like I said, this is just one step in the process. There are a few tools out there that provide code obfuscation and support the Windows Phone 7 platform (see links to other tools at the end of this post). One such tool is Dotfuscator from PreEmptive solutions. The thing about Dotfuscator is that they’ve struck a deal with Microsoft to provide a *free* copy of their commercial product for Windows Phone 7. The only drawback is that it only runs until March 31, 2010. However it’s a good place to start and the focus of this article. Getting Started When you fire up Dotfuscator you’re presented with a dialog to start a new project or load a previous one. We’ll start with a new project. You’re then looking at a somewhat blank screen that shows an Input tab (among others) and you’re probably wondering what to do? Click on the folder icon (first one) and browse to where your xap file is. At this point you can save the project and click on the arrow to start the process. Bam! You’re done. Right? Think again. The program did indeed run and create a new version of your xap (doing it’s thing and rewriting back your *obfuscated* assemblies) but let’s take a look at the assembly in Reflector to see the end result. Remember a xap file is really just a glorified zip file (or cab file if you prefer). When you ran Dotfuscator for the first time with the default settings you’ll see it created a new version of your xap in a folder under “My Documents” called “Dotfuscated” (you can configure the output directory in settings). Here’s the new xap file. Since a xap is just a zip, rename it to .cab or .zip or something and open it with your favorite unarchive program (I use WinRar but it doesn’t matter as long as it can unzip files). If you already have the xap file associated with your unarchive tool the rename isn’t needed. Once renamed extract the contents of the xap to your hard drive: Now you’ll have a folder with the contents of the xap file extracted: Double click or load up your assembly (WindowsPhoneDataBoundApplication1.dll in the example) in Reflector and let’s see the results: Hmm. That doesn’t look right. I can see all the methods and the code is all there for my LoadData method I wanted to protect. Product failure. Let’s return it for a refund. Hold your horses. We need to check out the settings in the program first. Remember when we loaded up our xap file. It started us on the Input tab but there was a settings tab before that. Wonder what it does? Here’s the default settings: Renaming Taking a closer look, all of the settings in Feature are disabled. WTF? Yeah, it leaves me scratching my head why an obfuscator by default doesn’t obfuscate. However it’s a simple fix to change these settings. Let’s enable Renaming as it sounds like a good start. Renaming obscures code by renaming methods and fields to names that are not understandable. Great. Run the tool again and go through the process of unzipping the updated xap and let’s take a look in Reflector again at our project. This looks a lot better. Lots of methods named a, b, c, d, etc. That’ll help slow hackers down a bit. What about our logic that we spent days weeks on? Let’s take a look at the LoadData method: What gives? We have renaming enabled but all of our code is still there. If you look through all your methods you’ll find it’s still sitting there out in the open. Control Flow Back to the settings page again. Let’s enable Control Flow now. Control Flow obfuscation synthesizes branching, conditional, and iterative constructs (such as if, for, and while) that produce valid executable logic, but yield non-deterministic semantic results when decompilation is attempted. In other words, the code runs as before, but decompilers cannot reproduce the original code. Do the dance again and let’s see the results in Reflector. Ahh, that’s better. Methods renamed *and* nobody can look at our LoadData method now. Life is good. More than Minimum This is the bare minimum to obfuscate your xap to at least a somewhat comfortable level. However I did find that while this worked in my Hello World demo, it didn’t work on one of my real world apps. I had to do some extra tweaking with that. Below are the screens that I used on one app that worked. I’m not sure what it was about the app that the approach above didn’t work with (maybe the extra assembly?) but it works and I’m happy with it. YMMV. Remember to test your obfuscated app on your device first before submitting to ensure you haven’t obfuscated the obfuscator. settings tab: rename tab: string encryption tab: premark tab: A few final notes Play with the settings and keep bumping up the bar to try to get as much obfuscation as you can. The more the better but remember you can overdo it. Always (always, always, always) deploy your obfuscated xap to your device and test it before submitting to the marketplace. I didn’t and got rejected because I had gone overboard with the obfuscation so the app wouldn’t launch at all. Not everything is going to be obfuscated. Specifically I don’t see a way to obfuscate auto properties and a few other language features. Again, if you crank the settings up you might hide these but I haven’t spent a lot of time optimizing the process. Some people might say to obfuscate your xaml using string encryption but again, test, test, test. Xaml is picky so too much obfuscation (or any) might disable your app or produce odd rendering effets. Remember, obfuscation is not 100% secure! Don’t rely on it as a sole way of protecting your assets. Other Tools Dotfuscator is one just product and isn’t the end-all be-all to obfuscation so check out others below. For example, Crypto can make it so Reflector doesn’t even recognize the app as a .NET one and won’t open it. Others can encrypt resources and Xaml markup files. Here are some other obfuscators that support the Windows Phone 7 platform. Feel free to give them a try and let people know your experience with them! Dotfuscator Windows Phone Edition Crypto Obfuscator for .NET DeepSea Obfuscation

  Read the article

• CodePlex Daily Summary for Friday, April 09, 2010

  CodePlex Daily Summary for Friday, April 09, 2010New Projects(SocketCoder) Free Silverlight Voice/Video Conferencing Modules: The Goal of this project is to provide complete Open Source Voice/Video Chatting Client/Server Modules Using Silverlight techniques, this project i...AJAX Control Framework: Do PageMethods and the UpdatePanel make you feel dirty? Think making AJAX enabled custom ASP.NET controls should WAY easier than it is? Wish ASP.NE...Bluetooth Radar: WPF 4.0 Application working with The final release of 32feet.net (v2.2) to Discover Bluetooth devices, send files and more cool stuff for Bluetooth...Bomberman: Bomberman c++ Project Code Library: This is just a personal storage place for a utility library containing extension methods, new classes, and/or improvements to existing classes.DianPing.com MogileFS Client: MogileFS Client for .Net 2.0Dirty City Hearts Website: Dirty City Hearts WebsiteDocGen - SharePoint 2010 Bulk Document Loader: DocGen is a SharePoint 2010 multithreaded console application for bulk loading sample documents into SharePoint. This program generates Microsoft ...dou24: WebSite for DOUExplora: Explora es un navegador de archivos que no pretende ser un sustituto del explorador de Windows, sino un experimento de codificación que compartir c...HobbyBrew Mobile: This project is basic beer brewing software for Windows Mobile able to read HobbyBrew xml files. Developed in C# and Windows FormsjLight: Interop between Silverlight and the javascript based on jQuery. The syntax used in Silverlight is as close as posible to the jQuery syntax.johandekoning.nl samples: Sample code project which are discussed on johandekoning.nl / johandekoning.com. Most examples are / will be developed with C#Kanban: this is a agile paroject managementMETAR.NET Decoder: Project libraries used to decode airport METAR weather information into adequate data types, change them and back, create resulting METAR informati...Micro Framework: MFDeploy with Set/Get mote SKU ID: This is a modification to the Micro Framework's MFDeploy utility that lets the user set and get the mote's ID (aka SKU). It can be done via the GUI...MobySharp: MobySharp is a implementation of the Mobypicture.com API written in C#NGilead: NGilead permits you to use your NHibernate POCO (and especially the partially loaded ones) outside the .NET Virtual Machine (to Silverlight for exa...OpenIdPortableArea: OpenIdPortableArea is an MvcContrib powered Portable Area that encapsulates logic for implementing OpenId encapsulation (using DotNetOpenAuth).OrderToList Extension for IEnumerable: An extension method for IEnumerable<T> that will sort the IEnumerable based on a list of keys. Suppose you have a list of IDs {10, 5, 12} and wa...project3140.org: Code repository for project3140.org.Prometheus Backup Solution: The Prometheus Backup Solution is a free and small Backup Utility for personal use and for small businesses.Roids: an asteroids clone for Silverlight and XNA: An example of a simple game cross-compiling for both Silverlight and XNA using SilverSprite.SemanticAnalyzer: 3rd phase of Compiler Design ProjectSSRS SDK for PHP: SQL Server Reporting Service SDK for PHPWorking Memory Workout: Working Memory Workout is a working memory training game based on the N-back, a task researchers say may improve fluid intelligence. It greatly ex...Wouters Code Samples: This Project will host some of my sample projects I created. I'm a professional SharePoint/BizTalk developer so most of the provided samples will ...New Releases(SocketCoder) Free Silverlight Voice/Video Conferencing Modules: Silverlight Voice Video Chat Modules: Client/Server Silverlight Voice Video Chat ModulesAccessibilityChecker: Accessibility Checker V0.2: Accessibility Checker V0.2 - Direct url´s input functionality added - XHTML, WAI validation modules, easy to extend. (W3C and Achecker modules incl...AStar.net: AStar.net 1.1 downloads: AStar.net 1.1 Version detailsGreatly improved path finding speed and memory usage from version 1.0. Avalaible downloads:AStar.net 1.1 dll - Runtim...AutoPoco: AutoPoco 0.2: This release will bring some non-generic alternatives to configuration + some more automatic configuration options such as assembly scanningBluetooth Radar: Version 1: Basic version only with the ability to discover Bluetooth devices around you.Convert-Media PowerShell Module for Expression Encoder: Release 1.0.0.2: This is a build that incorporates the latest change sets including perform publish. No other changesDevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 3e: Alpha 3e is a general debug. It also upgrades the software's family budgeting capabilities, including the addition of a new 'Food Nutrition Input'...dV2t Enterprise Library: dV2tEntLib 1.0.0.3: dV2tEntLib 1.0.0.3EnhSim: Release v1.9.8.3: Release v1.9.8.3 Change Armour Penetration calcs to apply the "Rouncer fix" (current version displays debug info to assist users in testing that th...HouseFly controls: HouseFly controls alpha 0.9: HouseFly controls 0.9 alpha binaries (Includes HouseFly.Classes and HouseFly.Controls).Jitbit WYSWYG BBCode Editor: Release: ReleaseMicro Framework: MFDeploy with Set/Get mote SKU ID: MFDeploy with get, set mote ID: The Micro Framework 4.0 MFDeploy, modified to let the user get & set the mote IDMobySharp: MobySharp 1.0: Initial ReleaseOpenIdPortableArea: OpenIdPortableArea: OpenIdPortableArea.Release: DotNetOpenAuth.dll DotNetOpenAuth.xml MvcContrib.dll MvcContrib.xml OpenIdPortableArea.dll OpenIdPortableAre...OrderToList Extension for IEnumerable: Release 0.9b: I'm calling this 0.9 because I came up with it yesterday and there's little real word use so there's probably something that needs fixing or improv...Prometheus Backup Solution: Prometheus BETA: Actual BETA Release. Restore Functions are not available...Reusable Library: V1.0.6: A collection of reusable abstractions for enterprise application developer.Reusable Library Demo: V1.0.4: A demonstration of reusable abstractions for enterprise application developerSharePoint Labs: SPLab4005A-FRA-Level100: SPLab4005A-FRA-Level100 This SharePoint Lab will teach you the 5th best practice you should apply when writing code with the SharePoint API. Lab La...SharePoint Labs: SPLab6001A-FRA-Level200: SPLab6001A-FRA-Level200 This SharePoint Lab will teach you how to create a generic Feature Receiver within Visual Studio. Creating a Feature Receiv...SharePoint LogViewer: SharePoint LogViewer 2.0: Supports live Farm monitoring. Many bug fixes.Simple Savant: Simple Savant v0.5: Added support for custom constraint/validation logic (See Versioning and Consistency) Added support for reliable cross-domain writes (See Version...SQL Server Extended Properties Quick Editor: Release 1.6.1: Whats new in 1.6.1: Add an edit form to support long text editing. double click to open editor. Add an ORM extended properties initializer to creat...SSRS SDK for PHP: SSRS SDK for PHP: Current release includes the SSRSReport library to connect to SQL Server Reporting Services and a sample application to show the basic steps needed...Table Storage Backup & Restore for Windows Azure: Table Storage Backup 1.0.3751: Bug fix: Crash when creating a table if the existing table had not finished deleting. Bug fix: Incorrect batch URI if the storage account ended in ...VCC: Latest build, v2.1.30408.0: Automatic drop of latest buildVisual Studio DSite: Audio Player (Visual C++ 2008): An audio player that can play wav files.Working Memory Workout: Working Memory Workout 1.0: Working Memory Workout is a working memory trainer based on the N-back memory task.Wouters Code Samples: XMLReceiveCBR: This is a Custom Pipeline component. It will help you create a Content Based Routing solution in combination of a WCF Requst/Response service. Gene...Xen: Graphics API for XNA: Xen 1.8: Version 1.8 (XNA 3.1) This update fixes a number of bugs in several areas of the API and introduces a large new Tutorial. [Added] L2 Spherical Ha...Most Popular ProjectsWBFS ManagerRawrMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsnopCommerce. Open Source online shop e-commerce solution.Shweet: SharePoint 2010 Team Messaging built with PexRawrAutoPocopatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog ModuleFacebook Developer ToolkitFarseer Physics EngineNcqrs Framework - The CQRS framework for .NET

  Read the article

< Previous Page | 253 254 255 256 257 258 259 260 261 262 263 264  | Next Page >