Search Results

Search found 11052 results on 443 pages for 'linked tables'.

Page 259/443 | < Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >

• SSL stops working on IIS7 after a reboot

  - by Mark Seemann

  I have a Windows 2008 Server with IIS7. Every time the server reboots, SSL stops working. Normal HTTP requests work fine, but any request to an HTTPS address gives the typical error message in the browser: Cannot find server or DNS I can temporarily fix it by opening IIS Manager and bring up the Bindings… window for the website in question. Then I select “https”, click on “Edit” then click “Ok” without making any changes to the settings. After doing this, browsing to https:// works again until the next reboot. This issue look as lot like the one described here, but according to the Certificates MMC snapin, the certificate in question does have a private key. I'm also pretty sure that I never installed the certificate in the personal store, but imported it straight into the machine store, but it's been a while... There's not a lot in the event log apart from the event ID 36870 also described in the post I linked to. Can anyone help me troubleshoot this issue so that SSL will work even after a server reboot?

  Read the article

• ADO 2.8, VMWare and SQL Server - sudden bulk dropped connections

  - by CodeByMoonlight

  We have an overworked server currently running a single SQL Server 2000 instance on physical hardware, and about 40 different apps interact with it on a daily basis. Last year, the RAID controller failed and we had no spare, so IT Support hurriedly migrated it overnight to a copy running on a VMWare Server. While it was on that server everything ran much quicker due to it being a big improvement in spec. However, the biggest app using it had occasional serious errors which never occurred on physical hardware. Specifically, several times a week it would disconnect batches of users - anywhere from just ten to hundreds at once, and all at the same time. It didn't affect any particular users or PCs or offices - all were affected equally. The only common thing was the app, which is a VB6 app using ADO 2.8 to connect. The other apps connecting to that virtualised instance of SQL Server seemingly had no problems, although they were (and are) responsible for only a tiny fraction of the work involving this server. The upshot is that after about two weeks of loving the speed and hating the random mass disconnections (which we were never able to find a cause for), we sadly took the decision to return to physical hardware and the disconnections vanished. Now we've reached the point where the old server just can't handle all that's being asked of it, and we're intending to migrate everything to 2 or more other servers. The snag is that there's a good chance they'll have to be virtual ones again. Given what happened last time, I'm trying to find out what possible reasons there could be for these mass disconnections. We were running VMWare ESX, but the network is Novell-based. Also, the server had a linked server setup to connect to an Informix server using a known-to-be-buggy ODBC driver, and this is used throughout the day. Any ideas on the cause(s)?

  Read the article

• Backup hardware and strategy on distributed Windows Server 2008 network

  - by CesarGon

  This question is a follow up to this. We have a Windows Server 2008 R2 domain over a network that spans two different buildings, linked by a 100-Mbps point-to-point line. Over 60 users work in the organisation. We are planning to use DFS folders and DFS replication for file serving across the organisation. The estimated data volume is over 2 TB, and will grow at approximately 20% annually. The idea is to set up a DFS file server in each building and use DFS so that all the contents stay replicated over the 100-Mbps link. We are now considering backup hardware and strategies. We are Dell customers and, after browsing the online Dell catalogue, I can see a number of backup hardware options. My main doubts are the following: Would you go for a tape library, disk backup, or are there other options worth considering? Would you perform batch backups (i.e. nightly) or would you use continuous backup (i.e. while users are working)? Would you use a dedicated backup server to which the tape library (or any other backup device) is attached, or is there any other alternative way of doing things? My experience with backup hardware and overall setup is limited, so I appreciate any good piece of advice that you may have. Thanks.

  Read the article

• Built local glibc, broke system, how do I ssh without parsing the .bashrc?

  - by Mikhail

  The cluster I am on had really old build tools and I needed to use CUDA5. I'm a pretty clever dude and I planned on building the necissary tools. So, I built a local copy of gcc, bintools, and glibc. Everything a CUDA5 could want. All builds finished without error. and I tested gcc and bintools. Everything was wonderful and I built and ran a few of the programs. I set up the LD_LIBRARY_PATHs in the .bashrc and logged back in, expecting a productive night ahead. To my horror I realized that everything is dynamically linked. Now I can't do simple commands like ls [ex@uid377 ~]$ ls ls: error while loading shared libraries: __vdso_time: invalid mode for dlopen(): Invalid argument and I can't do commands to fix the problem like rm or vim! Is there a way for me to ssh but also to ignore .bashrc file? Any suggestions are much appreciated. This machine is obviously under maintained and I don't know when I could have administrator support.

  Read the article

• Excel 2007: Named ranges problems when linking workbooks

  - by Mike

  I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

  Read the article

• Looking for equivalent of ProxyPassReverseMatch in Apache to fix missing trailing forward slash issue

  - by Alex Man

  I have two web servers, www.example.com and www.userdir.com. I'm trying to make www.example.com as the front end proxy server to serve requests like in the format of http://www.example.com/~username such as http://www.example.com/~john/ so that it sends an internal request of http://www.userdir.com/~john/ to www.userdir.com. I can achieve this in Apache with ProxyPass /~john http://www.userdir.com/~john ProxyPassReverse /~john http://www.userdir.com/~john The ProxyPassReverse is necessary as without it a request like http://www.example.com/~john without the trailing forward slash will be redirected as http://www.userdir.com/~john/ and I want my users to stay in the example.com space. Now, my problem is that I have a lot of users and I cannot list all those user names in httpd.conf. So, I use ProxyPassMatch ^(/~.*)$ http://www.userdir.com$1 but there is no such thing as ProxyPassReverseMatch in Apache. Without it, whenever the trailing forward slash is missing in the URL, one will be directed to www.userdir.com, and that's not what I want. I also tried the following to add the trailing forward slash RewriteCond %{REQUEST_URI} ^/~[^./]*$ RewriteRule ^/(.*)$ http://www.userdir.com/$1/ [P] but then it will render a page with broken image and CSS because they are linked to http://www.example.com/images/image.gif while it should be http://www.example.com/~john/images/image.gif. I have been googling for a long time and still can't figure out a good solution for this. Would really appreciate it if any one can shed some light on this issue. Thank you!

  Read the article

• PFSense VPN Routing

  - by SvrGuy

  We use PFSense firewalls at three installations with the following LAN networks: 1.) Datacenter #1: 10.0.0.0/16 2.) Datacenter #2: 10.1.0.0/16 3.) HQ: 10.2.0.0/16 All of these locations are linked via an IPSEC tunnel that works properly. Hosts in any of the above networks can communicate with hosts in any other of the above networks. Now, for our laptops etc. we established a road warrior network 10.3.0.0/16 and have implemented OpenVPN to link the laptops etc. to Datacenter #1. This works great too, so our laptops can connect and communicate with any host in Datacenter #1 (anything on 10.0.0.0/16) The problem is the laptops can't communicate with any hosts that Datacenter #1 can reach by its IPSEC tunnel to Datacenter #2 (and/or the HQ for that matter). Does anyone know what to do configuration wise on the PFSense box in Datacenter #1 to configure to route packets received on the OpenVPN tunnel to Datacenter #2 over the IPSEC tunnel? It could be a setting on the OpenVPN or some sort of static route or some such. Any ideas?

  Read the article

• Two DHCP servers on the same network

  - by CesarGon

  We are setting up a routing link between the Windows Server 2008 networks of two different buildings in my organisation. Each network uses a different IP addressing scheme (one uses public addresses, the other one uses private), but the goal is having a single Windows Server domain across the gap between the buildings. The link is provided by a 100-Mbps point-to-point line. I have always understood that you should not have more than one DHCP server on a network. However, we are planning to put a domain controller on each building, and each domain controller will be a DNS server and a DHCP server as well. The intention is that a machine booting up in building A gets its IP address from the DHCP server closer to it, in building A, while a machine booting up in building B gets an address from the DHCP server in building B. Since the two buildings will be linked and the network will be only one, will this work? How can I avoid that a machine booting up in building A gets an address from the DHCP server in building B (or vice versa)? Thanks.

  Read the article

• Two DHCP servers on the same network

  - by CesarGon

  We are setting up a routing link between the Windows Server 2008 networks of two different buildings in my organisation. Each network uses a different IP addressing scheme (one uses public addresses, the other one uses private), but the goal is having a single Windows Server domain across the gap between the buildings. The link is provided by a 100-Mbps point-to-point line. I have always understood that you should not have more than one DHCP server on a network. However, we are planning to put a domain controller on each building, and each domain controller will be a DNS server and a DHCP server as well. The intention is that a machine booting up in building A gets its IP address from the DHCP server closer to it, in building A, while a machine booting up in building B gets an address from the DHCP server in building B. Since the two buildings will be linked and the network will be only one, will this work? How can I avoid that a machine booting up in building A gets an address from the DHCP server in building B (or vice versa)? Thanks.

  Read the article

• Excael 2007: Name range problems when linking workbooks

  - by Mike

  I've 30+ workbooks each with 5 specific worksheets (formated the same). Each worksheet's data needs to be linked to a master workbook, so that I end up with 5 master workbooks and all the specific data in one long table format $A$2:$I$750. (Are you still with me? ;)) I don't have access to a database, so I'm having to link the sheets to their master workbook directly. I've highlighted the data I need; named the range; and then tried referencing this from my master workbook. I get the #Value error symbol when I try to link (=[WorkbookName]!MyNamedRange) to a cell that doesn't match the top left cell of my range. Example: MyNamedrange is always =$A$2:$I43$ on one specific sheet. On my master workbook it works if it's referenced at A2 but I get #Value if it's referenced A1, or A44. Any ideas? I'm trying to link my data in one continous table so I can run a pivot on it, and other things. Can it be done like this, or should I just copy and paste? I'm trying to keep things 'linked'so I do not need to spend time C&Ping all day. Many thanks Mike.

  Read the article

• Postfix spool on ext3 optimiziations in >=linux-2.6.34 days

  - by Luke404

  Given the very specific nature of the subject (we're not talking about mailboxes, just the spool; we're not talking about other filesystems, just ext3; and so on...) and the maturity of the softwares involved (linux kernel, ext3fs, postfix) I'd think there should be a more or less agreed on set of best practices to filesystem related tuning. I'm trying to get a roundup of them: data=journal became the default in recent kernels (somewhere around 2.6.30 IIRC) so we should be ok with that Wietse Venema says atime must be on, but Postfix documentation recommendsnoatime while talking about the Incoming Queue. Does that mean that postfix needs atime on just for some queue directories and will benefit from noatime on the others? can we use noatime if we just don't use ETRN? filesystem can be mounted nodev,noexec,nosuid - no* won't prevent you from setting attributes (postfix uses exec attr) they just won't have any effect (we don't run anything from the spool) the fsync() issue cited by Wietse and/or the chattr -S are probably linked to sync/async options of ext3fs but I do not understand them enough. Mouting the filesystem with async option is equivalent to chattr -R -S the whole fs? Seems like it will increase performance, but will that pose a risk of "loss of mail after a system crash" or is it really "safe on /var/spool/postfix" ? would you tune anything else on postfix-2.6.x to work better on ext3 or do you leave defaults everywhere? is there a "best" linux I/O scheduler for this kind of workload (namely CFQ or deadline?) or that's something that will vary too much based on hardware configuration? would you tune anything else in the filesystem or in the kernel? anything else? References: Postfix Performance here on SF Postfix documentation about the Incoming Queue Wietse Venema in Best file system on [email protected] here Postfix and ext3 on [email protected] here and there

  Read the article

• Getting Apache to serve same directory with different authentication over SSL?

  - by Lasse V. Karlsen

  I have set up VisualSVN server, a Subversion server that internally uses Apache, to serve my subversion repositories. I've managed to integrate WebSVN into it as well, and just now was able to get it to serve my repositories through WebSVN without having to authenticate, ie. no username or password prompt comes up. This is good. However, with this set up there is apparently no way for me to authenticate to WebSVN at all, which means all my private repositories are now invisible as far as WebSVN goes. I noticed there is a "Listen 81" directive in the .conf file, since I'm running the server on port 81 instead of 80, so I was wondering if I could set up a https:// connection to a different port, that did require authentication? The reason I need access to my private repositories is that I have linked my bug tracking system to the subversion repositories, so if I click a link in the bug tracking system, it will take me to diffs for the relevant files in WebSVN, and some products are in private repositories. Here's my Location section for WebSVN: <Location /websvn/> Options FollowSymLinks SVNListParentPath on SVNParentPath "C:/Repositories/" SVNPathAuthz on AuthName "Subversion Repository" AuthType Basic AuthBasicProvider file AuthUserFile "C:/Repositories/htpasswd" AuthzSVNAccessFile "C:/Repositories/authz" Satisfy Any Require valid-user </Location> Is there any way I can set up a separate section for a different port, say 8100, that does not have the Satisfy Any directive there, which is what enable anonymous access. Note that a different sub-directory on the server is acceptable as well, so /websvn_secure/, if I can make a location section for that and effectively serve the same content only without the Satisfy Any directive, that'd be good too.

  Read the article

• Private staff network within public network

  - by pianohacker

  I'm the sysadmin at a small public library. Since I got here a few years ago, I've been trying to set up the network in a secure and simple way. Security is a little tricky; the staff and patron networks need to be separated, for security reasons. Even if I further isolated the public wireless, I'd still rather not trust the security of our public computers. However, the two networks also need to communicate; even if I set up enough VMs so they didn't share any servers, they need to use the same two printers at the very least. Currently, I'm solving this with some jerry-rigged commodity equipment. The patron network, linked together by switches, has a Windows server connected to it for DNS and DHCP and a DSL modem for a gateway. Also on the patron network is the WAN side of a Linksys router. This router is the "top" of the staff network, and has the same Windows server connected on a different port, providing DNS and DHCP, and another, faster DSL modem (separate connections are very useful, especially as we heavily depend on some cloud-hosted software). tl;dr: We have a public network, and a NATed staff network within it. My question is; is this really the best way to do this? The right equipment would likely make my job easier, but anything with more than four ports and even rudimentary management quickly becomes a heavy hit on our budget. (My original question was about an ungodly frustrating DHCP routing issue, but I thought I'd ask whether my network was broken rather than asking about the DHCP problem and being told my network was broken.)

  Read the article

• Apache is running the wrong version of PHP.

  - by The Rook

  I am trying to enable CURL in php, and possibly update php as well. I have run into a road block where Apache seems to be running the wrong version of PHP. Here is some evidence. #lsof | grep php httpd 18397 nobody 135w REG 8,3 242 528537 /usr/local/apache/modules/libphp5.so I download the latest php 5.2.13 and build from source. I run a service httpd stop, do a make install and then I manually overwrite /usr/local/apache/modules/libphp5.so just to be safe. Using ldd i can see that its my fresh binary compiled with curl (the old one doesn't have curl.) ldd /usr/local/apache/modules/libphp5.so | grep curl libcurl.so.4 => /usr/local/lib/libcurl.so.4 (0x0064e000) I execute a phpinfo() and 5.2.3 is being executed instated of my new 5.2.13 and "curl" is nowhere to be found. What am I doing wrong? Why is curl disabled even though its statically linked? This is a RHEL 5.5 system.

  Read the article

• CHKDSK is unable to fix NTFS errors

  - by HackToHell

  After my PC shutdown due to power failure, I noticed several errors in EventViewer. The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume \Device\HarddiskVolume2. and The file system structure on the disk is corrupt and unusable. Please run the chkdsk utility on the volume C:. So I forced a chkdsk check at startup, and it finds a stream of error, here is the output, it is smaller than the actual log, because, Event Viewer only seems to have this much, the same line was repeated thousands of times.Here is that line. Some clusters occupied by attribute of type 0x80 and instance tag 0x4 in file 0x198f2 is already in use. Deleting corrupt attribute record (128, "") from file record segment 104690. Attribute record of type 0x80 and instance tag 0x0 is cross linked Also, even after running CHKDSK, the same errors were being reported again so I ran CHKDSK another time and it still loops the same line above, without fixing the error. Can anyone tell me how to fix it?

  Read the article

• how would it be possible to discover a cable modem's MAC remotely?

  - by amateurenthusiast

  i was reading the back archives of a canadian privacy law blog, and he linked to a judicial decision. apparently as part of an investigation in which were used yahoo chat and google's old 'hello' image trading program the officer was able to determine a suspect's modem's MAC address: In order to determine who STEPHTOSH was, the officer did a trace on a programme called WHO IS in an effort to learn from where STEPHTOSH was coming. WHO IS is a command program available to the public. The officer was able to ascertain that the person using the name STEPHTOSH was a Rogers Internet customer. The officer was able to obtain the Internet Protocol address, also known as the I.P. There is only one location for an I.P., which is unique to that subscriber. By use of the website known as DNS STUFF.com, one is able to find with which company this I.P. is registered. It was ascertained that the I.P. address used by STEPHTOSH was registered to Rogers Cable, from the Toronto area. The officer also learned the Cable Modem MAC address used by STEPHTOSH. This was all the information the officer was able to amass. now it was my understanding that the MAC address of any given device can only be accessed if you're only one 'hop' away on the Internet. the suspect in question was in Markham and the officer part of the Toronto Police, so it's conceivable that they both might have used Rogers internet. but would that still put them only one 'hop' away from each other? i thought the first hop after the modem was usually the ISP? and if he'd used a netBIOS query against this guy's machine it would return the ethernet card's MAC, not the modem's. so is this guy on the same rogers subnet as the suspect's cable modem, is that functionality part of google's Hello (i could only think that it would be possible if Hello operated as a virtual LAN or something), does the officer have remote access to the arp caches of the routers at Rogers or is he just full of crap and lying to make his case stronger?

  Read the article

• Blue screen error code 1000008e

  - by Kas

  I'm getting blue screens, mostly when trying to boot a program that required a lot of memory (games, photo editing software.) So far I've only managed to catch one set of error codes: BCCode: 1000008e BCP1: C0000005 BCP2: ADA393BA BCP3: E9BCEBC4 BCP4: 00000000 OS Version: 6_0_6002 Service Pack: 2_0 Product: 768_1 It's on a Sony VAIO Laptop VGN FW-41E, Vista OS service pack 2. Besides these codes it lists two 'temporary' files that were related with this crash: ...AppData\Local\Temp\WER-134925-0.sysdata.xml ...AppData\Local\Temp\WERDA66.tmp.version.txt When I googled these files some site said it was linked to a worm called 'yodo', but virus scans don't return any results (hitman pro, malware bytes, avast antivirus all turn up empty). Upon further searching about this yodo worm, I came across security stronghold where someone posted they had acquired this worm when downloading access and excel templates. Now, I actually did download templates for the same programs, they might have been the same, they may be related or I might be grasping at straws here. I have not noticed any issues other in performance as of late, just BSOD's when I start software that requires some memory, but I never had issues with these exact same programs before. Help and/or hints are required on how to actually figure out what's the root of this BSOD issue and how can I fix it. Do you reckon it's actually a virus? What program should be able to remove YODO worm stuff?

  Read the article

• "Delivered-To" Header in Exchange

  - by Kaii

  In some SMTP server implementations (i.e. Postfix) you can enable Delivered-To and X-Original-To headers that will be added to your email. (or [X-]Envelope-To) This is very helpful with distribution lists to determine which e-mail address the mail has been redirected to. So, when the mail has been sent to [email protected], you can see in the Delivered-To or Envelope-To header that it has been redirected (distributed) to [email protected], which is one of many other e-mail addresses that are linked to a single mailbox. How do I find which address was used to deliver this mail to a specific mailbox on Microsoft Exchange 2010? Looking at the plain message (with all headers) i can not find any information that the mail arrived via address [email protected] I think I need the Delivered-To header (or a similar one) to be set on Microsoft Exchange when a mail is delivered via distribution lists. Is there any way to enable such header in Exchange 2010? I need it so that our Ticket system (OTRS) correctly recognizes where the ticket belongs to. Adding all the e-mail addresses of all distribution lists to the system configuration is not the right solution. And if there is a solution for Exchange 2010, is this possibly also applicable to Exchange 2007?

  Read the article

• One Active Directory, Multiple Remote Desktop Services (Server 2012 solution)

  - by Trinitrotoluene

  What I am trying to do is quite complex, so I figured I'd throw it out to a wider audience to see if anyone can find a flaw. What I am trying to do (as an MSP/VAR) is design a solution that will give multiple companies a session based remote desktop (companies that need to be kept completely seperate), using only a handful of servers. This is how I imagine it at the moment: CORE SERVER - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC01 (Active Directory Domain Services for mycloud.local) Server2: Cloud-EX01 (Exchange Server 2010 running multi tenant mode) Server3: Cloud-SG01 (Remote Desktop Gateway) CORE SERVER 2 - Server 2012 Datacentre (All below are HyperV servers) Server1: Cloud-DC02 (Active Directory Domain Services for mycloud.local) Server2: Cloud-TS01 (Remote Desktop Session Host for Company A) Server3: Cloud-TS02 (Remote Desktop Session Host for Company B) Server4: Cloud-TS03 (Remote Desktop Session Host for Company C) What I thought about doing was setting up each Organisation in their own OU (perhaps creating their OU structure based on the Excahnge 2010 tenant OU structure so the accounts are linked). Each company would get a Remote Desktop Session Host server that would also serve as a file server. This server would be seperated from the rest on its own range. The server Cloud-SG01 would have access to all these networks and route the traffic to the appropriate network when a client connects and authenticated so they are pushed onto the correct server (Based on session collections in 2012). I won't lie this is something I have come up with quite quickly so there may well be something gapingly obvious that I am missing. Any feedback would be appreciated.

  Read the article

• Deploying Windows Service through group policy fails with Event ID 102

  - by Sören Kuklau

  I'm trying to deploy a custom Windows Service (written in C#; installed through a VS setup project) using a group policy. To help debug this, I also have two additional MSIs in the same policy. All three packages are deployed as a machine policy, not a user one. On one machine (runs Windows Server 2008; no UAC), all three deploy fine. The service is set to Automatic, as expected. On two machines (run Windows 7; UAC), the two other MSIs deploy fine, but my service fails to install. The event log gives an event ID of 102, which appears to be a permissions problem: The install of application "Package Name" from policy "Policy Name" failed. The error was The installation source for this product is not available. Verify that the source exists and that you can access it. However, all three packages come from the same share linked through UNC, so this is unlikely. My guess is that UAC is the problem; that the service requires additional permissions. Do I need to alter the MSI somehow?

  Read the article

• Limit copssh users to home directory Windows 7

  - by Siriss

  Hello all- I have found these two sites below: CopSSH SFTP -- limit users access to their home directory only and http://blogs.windowsnetworking.com/wnadmin/2006/11/07/copssh-restricting-users-access/ as well as the Copssh website, but upon completion they do not seem to work. I have copssh installed and I have a separate Windows account "sftpuser" created that is used to connect. The connection works just fine, but I want to limit that user to just their home directory and sub folders. I have 3 hard drives, the C:, a W: and an S: and I want the FTP account to only be able to access the W: drive and its contents (the root of the W: drive is the FTP home directory). Right now "sftpuser" can access all folders, including jump drives to C:, and S:. The linked tutorials do not seem to work, because it seems when I create a group "ftpusersgroup" and add "sftpuser" to the group, and then deny "ftpusersgroup" access to the C: drive, the service breaks and I can no longer login. I have undone everything and am ready to start fresh. Does anyone know how to do this, or is there a better tutorial that someone has or has found? I hope this makes sense. Thank you very much for any help!

  Read the article

• Windows 7 - system error 5 problem

  - by ianhobson

  My wife has just had a new computer for Christmas (with an upgrade from VISTA to Windows 7), and has joined the home network. We are using a mix of WindowsXP and Ubuntu boxes linked via a switch. We are all in the same workgroup. (No domain). Internet access, DHCP, and DNS server is an SME server that thinks it is domain controller (although we are not using a domain). I need to run a script to back up my wife's machine (venus). In the past the script creates a share on a machine with lots of space (leda), and then executes the line. PSEXEC \\venus -u admin -p adminpassword -c -f d:\Progs\snapshot.exe C: \\leda\Venus\C-drive.SNA With the wife's old XP machine, this would run the sysinternals utility, copy shapshot,exe to her machine and run it, which would then back up her C: drive to the share on leda. I cannot get this to work with Windows 7, nor can I link through to the C$ share on her machine. This gives me a permissions error (system error 5). The admin account is a full admin account. And yes - I do know the password. The ordinary shares on her machine work fine! I guess I'm missing something that Microsoft have built into Windows 7 - but what? The machine is running Windows 7 business, with windows firewall, AVG anti virus, and all the crap-ware you get with a new PC removed. Thanks

  Read the article

• Is there a free PDF printer / distiller that creates signable documents?

  - by Coderer

  I've used various methods (mentioned elsewhere on this site) to create PDFs, using a printer driver or converting from PostScript, etc. The common problem is that if I open any of the output files in the newer versions of Adobe Reader, there's an option to "Place Signature" but it's greyed out, or gives an error message that the feature has been disabled for this document. As far as I can tell, there's an option set somewhere in the document metadata that tells Reader "allow the user to sign this document", or don't. None of the free/open source tools that have been been linked to in other SU posts have had this listed as an option (though to be fair I haven't actually downloaded and tried all of them). Is there a tool that does this? Can I just poke a bit with a hex editor somewhere to turn on this functionality? I can sometimes get access to Acrobat Professional to turn on this option, but doing it for every desired case would be more work than I care to do. The current workaround for single-page documents is: Print the document to PDF (possibly via postscript) Open a single-page blank PDF with the "signable" bit turned on in Reader create a custom "stamp" using the Reader markup tools, by importing the printed-to document "stamp" an image of the printed document on the blank page, hoping to get it centered about right place a signature over the document-but-not-really you just stamped This obviously does not scale well at all. It would be much better if I could: Print the document to PDF Drag the document to a simple shortcut / tool / whatever Open the document in Reader Place a signature in the document ETA: Sorry, maybe I should have been clearer -- I'm talking about the certificate-based digital signing available in Adobe Reader, not adding a virtual ink signature. Also, any solution really would have to be available offline.

  Read the article

• Why isn't 'Low Fragmentation Heap' LFH enabled by default on Windows Server 2003?

  - by James Wiseman

  I've been investigating an issue with a production Classic ASP website running on IIS6 which seems indicative of memory fragmentation. One of the suggestions of how to ameliorate this came from Stackoverflow: How can I find why some classic asp pages randomly take a real long time to execute?. It suggested flipping a setting in the site's global.asa file to 'turn on' Low Fragmentation Heap (LFH). The following code (with a registered version of the accompanying DLL) did the trick. Set LFHObj=CreateObject("TURNONLFH.ObjTurnOnLFH") LFHObj.TurnOnLFH() application("TurnOnLFHResult")=CStr(LFHObj.TurnOnLFHResult) (Really the code isn't that important to the question). An author of a linked post reported a seemingly magic resolution to this issue, and, reading around a little more, I discovered that this setting is enabled by default on Windows Server 2008. So, naturally, this left me a little concerned: Why is this setting not enabled by default on 2003, or If it works in 2008 why have Microsoft not issued a patch to enable it by default on 2003? I suspect the answer to the above is the same for both (if there is one). Obviously, we're testing it in a non-production environment, and doing an array of metrics and comparisons to deem if it does help us. But aside from this I'm really just trying to understand if there's any technical reason why we should do this, or if there are any gotchas that we need to be aware of.

  Read the article

• Connecting to my home router web interface from work

  - by Joe

  Hi, I'm trying to connect to my home router web interface from work. I use dyndns, because I don't have a static IP at home, and it works perfectly from any other place except my workplace (update: I made a mistake, see edit below). When trying to access the web interface from work I get a "500 Server Error" with the code: SERVER_RESPONSE_RESET. I'm not trying to use any protocols such as remote desktop, I'm only trying to access the web interface. I can access any other web page from my workplace with no problems, and I think my router web interface is like any other web page, isn't it? I thought maybe my work place proxy blocks addresses of services like dyndns, so I also applied another trick. Since I have a web page on my own domain (say www.mydomain.com) which I can access from work, I tried adding a CNAME to my domain which is linked to the dyndns address (router.mydomain.com). This way if anyone enters the address router.mydomain.com from anywhere, they reach my home router web interface, and there's no way of knowing it's a dyndns address (or is there?). However, it still doesn't work from my workplace (I get the same error message). Any ides? Edit: I'm sorry to say I made a mistake earlier. I used to be able to access my home router web interface from my old workplace, and I thought it was still possible since I don't recall making any configuration changes. However, after reading the replies, I went over to my old workplace and checked, and it doesn't work from there either. I'm very sorry for giving out wrong and misleading information about my problem. So to summarize: my problem is that I can't access my home router web interface from anywhere.

  Read the article

< Previous Page | 255 256 257 258 259 260 261 262 263 264 265 266  | Next Page >