Search Results

Search found 1164 results on 47 pages for 'broadcast'.

Page 26/47 | < Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33 | Next Page >

Windows 2008 R2 DHCP server not responding to DHCP discover

- by MartinSteel

I've got two Windows 2008 Enterprise R2 servers both running DNS and DHCP called cod & lobster. DHCP is setup using the split scope option introduced with 2008 R2, whereby both servers should respond with the first response providing the lease. Setup is as follows: Cod - IP: 192.168.0.231 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 160-179. - Response Delay: 0ms - Authorised in Active Directory (Re-authorised to confirm) - Windows firewall disabled while testing Lobster - IP: 192.168.0.232 - Pool: 192.168.0.101 - 192.168.0.179, exclusion for 101-159. - Response Delay: 1000ms - Authorised in Active Directory All DHCP leases to clients are currently being issues by Lobster rather than Cod. Packet captures with Wireshark show the following (all to broadcast address): Client - DHCP Discover Lobster - DHCP Offer (after 1s delay) Client - DHCP Request Lobster - DHCP Ack Client - DHCP Inform From my setup with two servers I'd expect to see a DHCP Offer coming from Cod almost immediately after the DHCP Discover. Does anybody have any idea what would prevent the DHCP Server responding to the discover?

Read the article
Ubuntu 8.04 server is not retaining a static IP address

- by James Pierce

I recently setup a linux box running Ubuntu 8.04 (to match another server with 8.04). I need to insure that this box has a static IP address and I changed /etc/network/interfaces to set up the static IP address and when I run sudo /etc/init.d/networking restart it works fine for a while, but always reverts back to 10.0.1.24 after being idle for a while. I also tried stopping/removing the dhcp client, but that didn't help. sudo /etc/init.d/dhcp stop sudo apt-get remove dhcp3-client Here is my /etc/init.d/networking: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 10.0.1.4 netmask 255.255.255.0 broadcast 10.0.1.255 gateway 10.0.1.1 Any thoughts? Thanks.

Read the article
Stream video from one app to another in OS X (Software video input device)

- by Josh

Not sure how specifically to word this... I'm wondering if there's any way to take a video stream from one application, for example VLC Media Player, and present that video stream to other applications as a video input source. For example, could I broadcast a video file from my hard disk to a website that allows video conferencing using a Flash applet? Basically, I'm looking for something like Soundflower, but for video streams. Is this possible? Tags, title, question re-wording suggestions welcomed -- I'm not sure how to properly describe this. Thanks!

Read the article
Cheap dvr media server

- by Tester101

I would like to build a new computer to be used as a DVR and media server. I am thinking of using mythtv as the DVR software, but short of that decision I am completely open to suggestions. Requirements: Must be cheap. Must have low power consumption (since it will always be on). Should be quiet. Should be small. I'm really not sure where to start with this project, and am open to any hardware/software suggestions. Is it possible to build a small quiet and cheap system? *Keep in mind I am working on this project because I am tired of Cable rate increases, but I can't imagine living without a DVR so cost is very important and I would like the system to be sub $200.00. The system also needs to handle the new digital broadcast system. Thanks for the help,

Read the article
Force Windows to output only mono sound

- by sheepsimulator

So, the 'right' half of my pair of headphones broke (the transducer+wire are fine, but the earpiece broke on the headband and so the earpiece won't sit over my ear). So now the right channel is being broadcast to my cube neighbors when I wear my headphones. Yes, they look very silly. Is there a way to ensure, in Windows XP (or Windows Media Player), that all stereo sound is downmixed to the left channel only (ie, in mono) so my neighbors don't hear my music? I know that I can setup the mixer to set the balance to 100% left, but information in the right channel won't be heard.

Read the article
How to create a virtual audio device and stream audio input with it

- by Steven Rosato

Is it possible to create another audio device and redirect only wanted input streams to it? Here's my concrete problem: I am broadcasting a game via XFire and it uses the Windows audio device to capture any audio I receive. As I am broadcasting, other users who watch the video stream are communicating with me over Skype, and they hear themselves back within the video stream and it is entirely logical since I am broadcasting the audio I hear. What I want to do is create another audio device within Windows and redirect (pipe) ONLY the audio input from that game and not the input reveived from Skype. I would then tell XFire to use that newly created "virtual" audio device to broadcast and therefore my partners won't hear themselves back. Is there any software that can do that or can it be achieved natively with Windows? (I am under Windows 7).

Read the article
Wifi connection issues for Android with Linksys WRT54G

- by Paul

I have had this Linksys WRT54G for many years now, and it has always worked without a hassle. But for some reason I am unable to connect my brand new Android phone (Magic). The wireless network is broadcast and simply secured using WPA PSK TKIP. My phone sees the network (with excellent signal strength) and correctly asks me for the WPA password. Then when it tries to connect it stays for a while on "Retrieving address..." (liberately translated from Dutch) and finally fails reading "Remember, secured with WPA". Does anybody know how to solve this issue? edit: the android phone is genuine (not modified/rooted or whatsoever).

Read the article
Linux IPTables / routing issue

- by Jon

Hi all, EDIT 1/3/10 22:00 GMT - rewrote some of it after further investigation It has been a while since I looked at IPtables and I seem to be worse than before as I can not seem to get my webserver online. Below is my firewall rules on the gateway server that is running the dhcp server accessing the net. The webserver is inside my network on a static IP (192.168.0.98, default port). When I use Nmap or GRC.com I see that port 80 is open on the gateway server but when I browse to it, (via public URL. http://www.houseofhawkins.com) it always fails with a connection error, (nmap cannot connect and figure out what the web server is either). I can nmap the webserver and browse to it just fine via same IP inside my network. I believe it is my IPTable rules that are not letting it through. Internally I can route all my requests. Each machine can browse to the website and traffic works just fine. I can MSTSC / ssh to all the webservers internally and they inturn can connect to the web. IPTABLE: *EDIT - Added new firewall rules 2/3/10 * #!/bin/sh iptables="/sbin/iptables" modprobe="/sbin/modprobe" depmod="/sbin/depmod" EXTIF="eth2" INTIF="eth1" load () { $depmod -a $modprobe ip_tables $modprobe ip_conntrack $modprobe ip_conntrack_ftp $modprobe ip_conntrack_irc $modprobe iptable_nat $modprobe ip_nat_ftp echo "enable forwarding.." echo "1" > /proc/sys/net/ipv4/ip_forward echo "enable dynamic addr" echo "1" > /proc/sys/net/ipv4/ip_dynaddr # start firewall # default policies $iptables -P INPUT DROP $iptables -F INPUT $iptables -P OUTPUT DROP $iptables -F OUTPUT $iptables -P FORWARD DROP $iptables -F FORWARD $iptables -t nat -F #echo " Opening loopback interface for socket based services." $iptables -A INPUT -i lo -j ACCEPT $iptables -A OUTPUT -o lo -j ACCEPT #echo " Allow all connections OUT and only existing and related ones IN" $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A OUTPUT -o $EXTIF -j ACCEPT $iptables -A OUTPUT -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $EXTIF -o $INTIF -m state --state ESTABLISHED,RELATED -j ACCEPT $iptables -A FORWARD -i $INTIF -o $EXTIF -j ACCEPT $iptables -A FORWARD -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A INPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " $iptables -A OUTPUT -j LOG --log-level 7 --log-prefix "Dropped by firewall: " #echo " Enabling SNAT (MASQUERADE) functionality on $EXTIF" $iptables -t nat -A POSTROUTING -o $EXTIF -j MASQUERADE $iptables -A INPUT -i $INTIF -j ACCEPT $iptables -A OUTPUT -o $INTIF -j ACCEPT #echo " Allowing packets with ICMP data (i.e. ping)." $iptables -A INPUT -p icmp -j ACCEPT $iptables -A OUTPUT -p icmp -j ACCEPT $iptables -A INPUT -p udp -i $INTIF --dport 67 -m state --state NEW -j ACCEPT #echo " Port 137 is for NetBIOS." $iptables -A INPUT -i $INTIF -p udp --dport 137 -j ACCEPT $iptables -A OUTPUT -o $INTIF -p udp --dport 137 -j ACCEPT #echo " Opening port 53 for DNS queries." $iptables -A INPUT -p udp -i $EXTIF --sport 53 -j ACCEPT #echo " opening Apache webserver" $iptables -A PREROUTING -t nat -i $EXTIF -p tcp --dport 80 -j DNAT --to 192.168.0.96:80 $iptables -A FORWARD -p tcp -m state --state NEW -d 192.168.0.96 --dport 80 -j ACCEPT } flush () { echo "flushing rules..." $iptables -P FORWARD ACCEPT $iptables -F INPUT $iptables -P INPUT ACCEPT echo "rules flushed" } case "$1" in start|restart) flush load ;; stop) flush ;; *) echo "usage: start|stop|restart." ;; esac exit 0 route info: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 5e0412a6.bb.sky * 255.255.255.255 UH 0 0 0 eth2 192.168.0.0 * 255.255.255.0 U 0 0 0 eth1 default 5e0412a6.bb.sky 0.0.0.0 UG 100 0 0 eth2 ifconfig: eth1 Link encap:Ethernet HWaddr 00:22:b0:cf:4a:1c inet addr:192.168.0.1 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::222:b0ff:fecf:4a1c/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:79023 errors:0 dropped:0 overruns:0 frame:0 TX packets:57786 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11580918 (11.5 MB) TX bytes:22872030 (22.8 MB) Interrupt:17 Base address:0x2b00 eth2 Link encap:Ethernet HWaddr 00:0c:f1:7c:45:5b inet addr:94.4.18.166 Bcast:94.4.18.166 Mask:255.255.255.255 inet6 addr: fe80::20c:f1ff:fe7c:455b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:57038 errors:0 dropped:0 overruns:0 frame:0 TX packets:34532 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:21631721 (21.6 MB) TX bytes:7685444 (7.6 MB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:16 errors:0 dropped:0 overruns:0 frame:0 TX packets:16 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1517 (1.5 KB) TX bytes:1517 (1.5 KB) EDIT OK so as requested I will try and expand on my infrastructure: I previously had it setup with a Sky broadband modem router that did the DHCP and I used its web interface to port forward the web across to the web server. The network looked something like this: I have now replaced the sky modem with a dlink modem which gives the IP to the gateway server that now does the DHCP. It looks like: The internet connection is a standard broadband connection with a dynamic IP, (use zoneedit.com to keep it updated). I have tried it on each of the webservers(one Ubuntu Apache server and one WS2008 IIS7). I think there must also be an issue with my IPTable rules as it can route to my win7 box which has the default IIS7 page and that would not display when I forwarded all port 80 to it. I would be really grateful for any and all help with this. Thanks Jon

Read the article
BIND authoritative name server: SERVFAIL?

- by Luca Tettamanti

I have a BIND 9.6 instance that acts as a caching NS for the whole building and is also authoritative for an internal zone ("example" below): zone "example" { type master; file "example"; update-policy { grant dhcp-update subdomain example. A TXT; }; }; Due to a rogue switch we lost connectivity with the rest of the world, and the NS started answering SERVFAIL; what surprised me was that the server was also unable to respond to queries for the example domain. What is the reason of this behavior? Shouldn't the NS be able to answer since it has authoritative data? edit: The rest of the configuration is the standard one shipped with Debian: hints for the root servers and the zones for localhost and broadcast.

Read the article
DRBD Not syncing between my nodes

- by Mike Curry

Some version info: Operating system is Ubuntu 11.10, on EC2, kernel is 3.0.0-16-virtual and the application info is: Version: 8.3.11 (api:88) GIT-hash: 0de839cee13a4160eed6037c4bddd066645e23c5 build by buildd@allspice, 2011-07-05 19:51:07 Getting some strange errors in dmesg (seen below) as well, there is no replication happening. I have made my first node primary and its showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Primary/Unknown UpToDate/DUnknown r----s ext3 my secondary node is showing: drbd driver loaded OK; device status: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 m:res cs ro ds p mounted fstype 0:r0 StandAlone Secondary/Unknown Inconsistent/DUnknown r----s Showing /proc/drbd on the master shows: version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Primary/Unknown ds:UpToDate/DUnknown r----s ns:0 nr:0 dw:4 dr:1073 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Showing /proc/drbd on the slave shows that there is nothing being transfered... version: 8.3.11 (api:88/proto:86-96) srcversion: DA5A13F16DE6553FC7CE9B2 0: cs:StandAlone ro:Secondary/Unknown ds:Inconsistent/DUnknown r----s ns:0 nr:0 dw:0 dr:0 al:0 bm:0 lo:0 pe:0 ua:0 ap:0 ep:1 wo:f oos:262135964 Here is my config... resource r0 { protocol C; startup { wfc-timeout 15; degr-wfc-timeout 60; } net { cram-hmac-alg sha1; shared-secret "test123; } on drbd01 { device /dev/drbd0; disk /dev/xvdm; address 23.XX.XX.XX:7788; # blocked out ip meta-disk internal; } on drbd02 { device /dev/drbd0; disk /dev/xvdm; address 184.XX.XX.XX:7788; #blocked out ip meta-disk internal; } } I have run the following on the master: sudo drbdadm -- --overwrite-data-of-peer primary all There is no firewall between the systems. Here is the dmesg with some errors: [2285172.969955] drbd: initialized. Version: 8.3.11 (api:88/proto:86-96) [2285172.969960] drbd: srcversion: DA5A13F16DE6553FC7CE9B2 [2285172.969962] drbd: registered as block device major 147 [2285172.969965] drbd: minor_table @ 0xffff88000276ea00 [2285173.000952] block drbd0: Starting worker thread (from drbdsetup [1300]) [2285173.003971] block drbd0: disk( Diskless -> Attaching ) [2285173.006150] block drbd0: No usable activity log found. [2285173.006154] block drbd0: Method to ensure write ordering: flush [2285173.006158] block drbd0: max BIO size = 4096 [2285173.006165] block drbd0: drbd_bm_resize called with capacity == 524271928 [2285173.008512] block drbd0: resync bitmap: bits=65533991 words=1023969 pages=2000 [2285173.008518] block drbd0: size = 250 GB (262135964 KB) [2285173.079566] block drbd0: bitmap READ of 2000 pages took 17 jiffies [2285173.081189] block drbd0: recounting of set bits took additional 1 jiffies [2285173.081194] block drbd0: 250 GB (65533991 bits) marked out-of-sync by on disk bit-map. [2285173.081203] block drbd0: Suspended AL updates [2285173.081210] block drbd0: disk( Attaching -> UpToDate ) [2285173.081214] block drbd0: attached to UUIDs 1C1291D39584C1D1:0000000000000004:0000000000000000:0000000000000000 [2285173.095016] block drbd0: conn( StandAlone -> Unconnected ) [2285173.095046] block drbd0: Starting receiver thread (from drbd0_worker [1301]) [2285173.099297] block drbd0: receiver (re)started [2285173.099304] block drbd0: conn( Unconnected -> WFConnection ) [2285173.099330] block drbd0: bind before connect failed, err = -99 [2285173.099346] block drbd0: conn( WFConnection -> Disconnecting ) [2285173.295788] block drbd0: Discarding network configuration. [2285173.295815] block drbd0: Connection closed [2285173.295826] block drbd0: conn( Disconnecting -> StandAlone ) [2285173.295840] block drbd0: receiver terminated [2285173.295844] block drbd0: Terminating drbd0_receiver Edit: Reading some other similar issues, it was suggested to do a 'drbdadm dump all', so I figured it couldn't hurt. ubuntu@drbd01:~$ drbdadm dump all /etc/drbd.conf:19: in resource r0, on drbd01: IP 23.XX.XX.XX not found on this host. and on slave: root@drbd02:~# drbdadm dump all /etc/drbd.conf:25: in resource r0, on drbd02: IP 184.XX.XX.XX not found on this host. Strange it doesn't find its own ip, however, this is an Amazon EC2 system using an elastic IP... here are my ipconfigs for both... master: ubuntu@drbd01:~$ ifconfig eth0 Link encap:Ethernet HWaddr 22:00:0a:1c:27:11 inet addr:10.28.39.17 Bcast:10.28.39.63 Mask:255.255.255.192 inet6 addr: fe80::2000:aff:fe1c:2711/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1569 errors:0 dropped:0 overruns:0 frame:0 TX packets:1169 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:124409 (124.4 KB) TX bytes:213601 (213.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) slave: root@drbd02:~# ifconfig eth0 Link encap:Ethernet HWaddr 12:31:3f:00:14:9d inet addr:10.160.27.107 Bcast:10.160.27.255 Mask:255.255.254.0 inet6 addr: fe80::1031:3fff:fe00:149d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:774 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:75381 (75.3 KB) TX bytes:109673 (109.6 KB) Interrupt:26 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

Read the article
Watchguard firebox: public IP addresses behind firewall with as much usable IP addresses as possible

- by martinezpt

Our ISP assigned us 16 public IP addresses that we want to assign to hosts behind a Watchguard firebox x750e. The IP addresses are: x.x.x.176/28 of which x.x.x.177 is the gateway. The hosts will be running software that needs to be directly assigned the public IP address so 1:1 NAT is not an option. I found this document that gives examples on how to assign public IP addresses to hosts behind the firewall, using an optional interface: http://www.watchguard.com/help/configuration-examples/public_IP_behind_XTM_configuration_example_(en-US).pdf However, I can't implement scenario 1 as it won't allow me to use the same subnet on both interfaces. As for scenario 2, splitting the address range into 2 subnets will decrease the usable hosts on the optional interface to 5 (8 - network - broadcast - optional interface ip). I'm convinced that there must be a better way to address this problem and maximize the number of usable IP addresses but I'm not very familiar with this specific firewall. Are there any suggestions on how to keep the hosts behind the firewall with public IP addresses while maximizing the usable IP addresses? thanks

Read the article
KVM-Guests can't get past bridge - no internet connection

- by tmn29a

I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

Read the article
ffmpeg, vlc - Unable to find input stream

- by zozo

Good day to all... I have some "little" problems with ffserver and ffmpeg... What I need to do is to broadcast a live video. So I got the cam... used vlc and used send stream option. I sent it to 192.168.1.9:64555, which is a virtual machine on the same computer, running centos. On the virtual machine I run the command ffmpeg -i 192.168.1.9:64555 output.mpg. The response is "unable to find file whatever". Can any1 tell me what I did wrong? Thank you and have a great day. Print-screen with error:

Read the article
Using airport extreme base station as a wireless G to wireless N bridge

- by micmcg

Due to unfortunate placement of various wall outlets in my new apartment, my adsl 2 modem + router is not able to be placed next to my airport extreme base station (AEBS). I'd prefer not to run cat5 cable between them, but I still want to use the wireless N on the AEBS, because it will have a high speed NAS plugged in via gigabit ethernet so I want to maximise the wireless transfer speed to my 27" iMac. Is it possible to use one of the radios in the airport extreme to bridge the wireless G network with the router, and the wireless N radio to broadcast normally? The only traffic going over the G network should be internet (24mbps ADSL2) so it should never get saturated. Thanks

Read the article
Bonjour/DNS Service Discovery queries

- by senloe

I'm trying to implement dns service discovery in my application (no, I'm not asking for a programmatic answer). What I believe is one of my big pain points is generating the query. I know I need to send out a multicast broadcast on port 5353 and want to look for devices of type _ipp._tcp and _print._tcp, but I don't know what the question section needs to look like. For example, in SSDP I sent out a query that looks like the following: "M-SEARCH * HTTP/1.1\r\n" "HOST: 239.255.255.250:1900\r\n" + "MAN: \"ssdp:discover\"\r\n" "ST: urn:schemas-upnp-org:device:Printer:1\r\n" "MX: 5000\r\n\r\n" From what I know about a DNS query I need to send something like: "_ipp.tcp,all,all" but I know there needs to be more. Any pointers to documentation, etc would be greatly appreciated! update rfc1035 appears to contain promising information re the message structure.

Read the article
Multicast doesn't seem to be working on RHEL 5.5

- by NullUser

I'm trying to install Oracle Grid Infrastructure on two machines. Their documentation states You must enable multicasting for the cluster on the IP address subnet ranges 224.0.0.0/24 and 230.0.1.0/24 So I ran: route add -net 224.0.0.0/24 dev eth2 route add -net 230.0.1.0/24 dev eth2 route -n produces: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 230.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 224.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 # and others An ifconfig eth2 shows, among other things, UP BROADCAST RUNNING MULTICAST. However, when I run their multicast test utility, it fails me: Test for Multicast address 230.0.1.0 Sep 3 19:40:39 | Multicast Failed for eth2 using address 230.0.1.0:42000 Test for Multicast address 224.0.0.251 Sep 3 19:41:10 | Multicast Failed for eth2 using address 224.0.0.251:42001 What am I doing wrong?

Read the article
Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

- by Daniel Adarve

I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

Read the article
Remapping Home/End from PC to Mac Via Synergy is not client specific.

- by DtBeloBrown

This question asks about the end key but the answers give no examples: http://superuser.com/questions/60052/what-key-works-like-end-using-a-mac-with-synergy If they had, I am guessing that they would likely have run into this problem. Adding lines like the bottom two of this: section: options keystroke(End) = keystroke(Control+Right,myiMac) keystroke(Home) = keystroke(Control+Left,myiMac) to my synergy.sgc in MyDocuments on the winXP machine would work but causes the keys to stop functioning on the winXP machine. Unacceptable. I next tried a compromise: keystroke(End) = keystroke(Control+Right,myiMac); keystroke(End,myPc) keystroke(Home) = keystroke(Control+Left,myiMac); keystroke(Home,myPc) Expecting that to broadcast the keystrokes to both machines regardless of which one was the Active Screen. That and many other variations did not work. What am I doing wrong? Has someone actually done this?

Read the article
Remote Access Problems with DRAC 5 on Dell PowerEdge 1950

- by Darin Peterson

Today I received my first Dell PowerEdge 1950 server with a DRAC 5 card. On my local network I have static configurations on my Linux systems using this for instance: iface eth0 inet static address 192.168.1.210 netmask 255.255.255.0 network 192.168.1.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 8.8.8.8 8.8.4.4 For the DRAC card, I configured the LAN like this: address 192.168.1.215 netmask 255.255.255.0 gateway 192.168.1.1 For the advanced LAN settings I used dns-nameservers 8.8.8.8 8.8.4.4 I've tried many different IP addresses, but cannot communicate with the card. Is there anyone who might know if I have configuration issues, or maybe if the card might be bad?

Read the article
Secondary DHCP server won't start on Centos 6.2

- by Slowjoe

I'm trying to create a backup DHCP server. Server times are in sync. Primary server starts fine. Secondary server won't start. Error from /var/log/messages is: Sep 15 14:47:45 stream dhcpd: Copyright 2004-2010 Internet Systems Consortium. Sep 15 14:47:45 stream dhcpd: All rights reserved. Sep 15 14:47:45 stream dhcpd: For info, please visit https://www.isc.org/software/dhcp/ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 25: invalid statement in peer declaration Sep 15 14:47:45 stream dhcpd: #011max-response-default Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 41: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 49: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: WARNING: Host declarations are global. They are not limited to the scope you declared them in. Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 70: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: /etc/dhcp/dhcpd.conf line 78: failover peer dhcp-failover: not found Sep 15 14:47:45 stream dhcpd: failover peer "dhcp-failover" Sep 15 14:47:45 stream dhcpd: ^ Sep 15 14:47:45 stream dhcpd: Configuration file errors encountered -- exiting Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: This version of ISC DHCP is based on the release available Sep 15 14:47:45 stream dhcpd: on ftp.isc.org. Features have been added and other changes Sep 15 14:47:45 stream dhcpd: have been made to the base software release in order to make Sep 15 14:47:45 stream dhcpd: it work better with this distribution. Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: Please report for this software via the CentOS Bugs Database: Sep 15 14:47:45 stream dhcpd: http://bugs.centos.org/ Sep 15 14:47:45 stream dhcpd: Sep 15 14:47:45 stream dhcpd: exiting. Config file contents: # DHCP Server Configuration file. # see /usr/share/doc/dhcp*/dhcpd.conf.sample # see 'man 5 dhcpd.conf' # option domain-name "eng.foo.com"; option domain-name-servers ns0.eng.foo.com, ns1.eng.foo.com; option ntp-servers ntp.eng.foo.com; #option time-servers ntp.eng.foo.com; default-lease-time 3600; max-lease-time 7200; authoritative; log-facility local7; failover peer "dhcp-failover" { secondary; address 10.0.1.70; port 647; peer address 10.0.1.11; peer port 647; max-response-default 30; max-unacked-updates 10; load balance max seconds 3; } # # Management subnet # subnet 10.0.0.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.0.255; option routers 10.0.0.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.0.240 10.0.0.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.0.150 10.0.0.199; deny unknown-clients; } include "/etc/dhcp/dhcpd.conf-engmgmt"; } # # Data subnet # subnet 10.0.1.0 netmask 255.255.255.0 { option subnet-mask 255.255.255.0; option broadcast-address 10.0.1.255; option routers 10.0.1.1; option domain-search "eng.foo.com", "foo.com"; # Unknown clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 300; range 10.0.1.240 10.0.1.249; allow unknown-clients; } # Known clients get this pool pool { failover peer "dhcp-failover"; max-lease-time 28800; range 10.0.1.150 10.0.1.199; deny unknown-clients; } # For centos network installs if substring (option vendor-class-identifier, 0, 8) = "anaconda" { filename "/autohome/distro/ks/"; next-server eng-data.eng.foo.com; } # For PXE network installs if substring (option vendor-class-identifier, 0, 9) = "PXEClient" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } # For KVM PXE network installs if substring (option vendor-class-identifier, 0, 9) = "Etherboot" { filename "pxelinux.0"; next-server eng-data.eng.foo.com; } include "/etc/dhcp/dhcpd.conf-engdata"; }

Read the article
Streaming video from a point-and-shoot camera that doesn't support it

- by egasimus

I have a Canon IXUS 120is (PowerShot SD940) - a nice digital camera that's a couple of years old. It does record fairly decent video, but, alas, can't function as a webcam - and I need to stream video over the Web. I've installed CHDK on it, and while it's quite flexible, doesn't seem to provide a solution to my problem. I suppose that the video footage is written to the SD card in real time - is there a hack that allows me to monitor the file as it is written, and broadcast its contents over the Internet? Perhaps connecting its the camera's slot to my laptop's card reader via SDIO? I'm running Windows, but I'm roughly familiar with Linux; another question has suggested a file-to-/dev/video driver - do such tools exist?

Read the article
Bonding: works only from one link

- by Crazy_Bash

I would like to install bonding with 4 links. but only one of them is active. eth4 is always active. the others simply don't work. those are my configs: DEVICE="eth2" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth3" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth4" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE="eth5" BOOTPROTO="none" MASTER=bond0 SLAVE=yes USERCTL=no NM_CONTROLLED="no" ONBOOT="yes" DEVICE=bond0 IPADDR=<ip> BROADCAST=<ip> NETWORK=<ip> GATEWAY=<ip> NETMASK=<ip> USERCTL=no BOOTPROTO=none ONBOOT=yes NM_CONTROLLED=no /etc/modprobe.d/bonding.conf alias bond0 bonding options bond0 mode=4 miimon=100 updelay=200 #downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1 Linux: Linux 3.0.0+ #1 SMP Fri Oct 26 07:55:47 EEST 2012 x86_64 x86_64 x86_64 GNU/Linux what i've tried: downdelay=200 xmit_hash_policy=layer3+4 lacp_rate=1

Read the article
Linux policy routing - packets not coming back

- by Bugsik

i am trying to set up policy routing on my home server. My network looks like this: Host routed VPN gateway Internet link through VPN 192.168.0.35/24 ---> 192.168.0.5/24 ---> 192.168.0.1 DSL router 10.200.2.235/22 .... .... 10.200.0.1 VPN server The traffic from 192.168.0.32/27 should be and is routed through VPN. I wanted to define some routing policies to route some traffic from 192.168.0.5 through VPN as well - for start - from user with uid 2000. Policy routing is done using iptables mark target and ip rule fwmark. The problem: When connecting using user 2000 from 192.168.0.5 tcpdump shows outgoing packets, but nothing comes back. Traffic from 192.168.0.35 works fine (here I am not using fwmark but src policy). Here is my VPN gateway setup: # uname -a Linux placebo 3.2.0-34-generic #53-Ubuntu SMP Thu Nov 15 10:49:02 UTC 2012 i686 i686 i386 GNU/Linux # iptables -V iptables v1.4.12 # ip -V ip utility, iproute2-ss111117 IPtables rules (all policies in table filter are ACCEPT) # iptables -t mangle -nvL Chain PREROUTING (policy ACCEPT 770K packets, 314M bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 767K packets, 312M bytes) pkts bytes target prot opt in out source destination Chain FORWARD (policy ACCEPT 5520 packets, 1920K bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 782K packets, 901M bytes) pkts bytes target prot opt in out source destination 74 4707 MARK all -- * * 0.0.0.0/0 0.0.0.0/0 owner UID match 2000 MARK set 0x3 Chain POSTROUTING (policy ACCEPT 788K packets, 903M bytes) pkts bytes target prot opt in out source destination # iptables -t nat -nvL Chain PREROUTING (policy ACCEPT 996 packets, 51172 bytes) pkts bytes target prot opt in out source destination Chain INPUT (policy ACCEPT 7 packets, 432 bytes) pkts bytes target prot opt in out source destination Chain OUTPUT (policy ACCEPT 1364 packets, 112K bytes) pkts bytes target prot opt in out source destination Chain POSTROUTING (policy ACCEPT 2302 packets, 160K bytes) pkts bytes target prot opt in out source destination 119 7588 MASQUERADE all -- * vpn 0.0.0.0/0 0.0.0.0/0 Routing: # ip addr show 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,PROMISC,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast master lan state UNKNOWN qlen 1000 link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff valid_lft forever preferred_lft forever 3: lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP link/ether 00:40:63:f9:c3:8f brd ff:ff:ff:ff:ff:ff inet 192.168.0.5/24 brd 192.168.0.255 scope global lan inet6 fe80::240:63ff:fef9:c38f/64 scope link valid_lft forever preferred_lft forever 4: vpn: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100 link/none inet 10.200.2.235/22 brd 10.200.3.255 scope global vpn # ip rule show 0: from all lookup local 32764: from all fwmark 0x3 lookup VPN 32765: from 192.168.0.32/27 lookup VPN 32766: from all lookup main 32767: from all lookup default # ip route show table VPN default via 10.200.0.1 dev vpn 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 # ip route show default via 192.168.0.1 dev lan metric 100 10.200.0.0/22 dev vpn proto kernel scope link src 10.200.2.235 192.168.0.0/24 dev lan proto kernel scope link src 192.168.0.5 TCP dump showing no traffic coming back when connection is made from 192.168.0.5 user 2000 # tcpdump -i vpn tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on vpn, link-type RAW (Raw IP), capture size 65535 bytes ### Traffic from user 2000 on 192.168.0.5 ### 10:19:05.629985 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6887764 ecr 0,nop,wscale 4], length 0 10:19:21.678001 IP 10.200.2.235.37291 > 10.100-78-194.akamai.com.http: Flags [S], seq 2868799562, win 14600, options [mss 1460,sackOK,TS val 6891776 ecr 0,nop,wscale 4], length 0 ### Traffic from 192.168.0.35 ### 10:23:12.066174 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [S], seq 2294159276, win 65535, options [mss 1460,nop,wscale 4,nop,nop,TS val 557451322 ecr 0,sackOK,eol], length 0 10:23:12.265640 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [S.], seq 2521908813, ack 2294159277, win 14480, options [mss 1367,sackOK,TS val 388565772 ecr 557451322,nop,wscale 1], length 0 10:23:12.276573 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [.], ack 1, win 8214, options [nop,nop,TS val 557451534 ecr 388565772], length 0 10:23:12.293030 IP 10.200.2.235.49247 > 10.100-78-194.akamai.com.http: Flags [P.], seq 1:480, ack 1, win 8214, options [nop,nop,TS val 557451552 ecr 388565772], length 479 10:23:12.574773 IP 10.100-78-194.akamai.com.http > 10.200.2.235.49247: Flags [.], ack 480, win 7776, options [nop,nop,TS val 388566081 ecr 557451552], length 0

Read the article
How to create a virtual audio device and stream audio input with it

- by Steven Rosato

Is it possible to create another audio device and redirect only wanted input streams to it? Here's my concrete problem: I am broadcasting a game via XFire and it uses the Windows audio device to capture any audio I receive. As I am broadcasting, other users who watch the video stream are communicating with me over Skype, and they hear themselves back within the video stream and it is entirely logical since I am broadcasting the audio I hear. What I want to do is create another audio device within Windows and redirect (pipe) ONLY the audio input from that game and not the input reveived from Skype. I would then tell XFire to use that newly created "virtual" audio device to broadcast and therefore my partners won't hear themselves back. Is there any software that can do that or can it be achieved natively with Windows? (I am under Windows 7).

Read the article
default gateway of a host

- by varun

if my understanding is correct, the following is what happens when a host A wants to communicate with a machine X outside its network. 1) The host ,checks it routing table to find out if there is any direct routes to the machine. 2) It finds out that the machine is outside its network and has to sent the packets to the default gateway(router) R. 3) The host sents an ARP broadcast to get the mac of the router R. 4) After getting the MAC, the host creates a packet with src IP and MAC as that of the host A, dest IP of the remote machine X and dest MAC of the router R. 5)The router R receives the packet, either drops its or sents its to its next hope, which can be another router or the remote machine X itself. Can anyone explain, how the steps would be, if i set the default gateway of the host A as host A itself...?

Read the article

< Previous Page | 22 23 24 25 26 27 28 29 30 31 32 33 | Next Page >