Search Results

Search found 7637 results on 306 pages for 'cd drives'.

Page 260/306 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

• Windows 7 boot issues

  - by Michael

  Ok, I tried to install linux and dual boot my laptop with 7 ultimate. I messed up. When I tried to boot to 7 it said no. Something along the lines of device not found. So I being young and stupid I uninstalled linux which I could boot into, and I still could not boot to windows. Next step was to run the startup fixes from the boot cd. Swing and a miss, I also ran the fixmbr and fixboot. Which brings us up to my current place. I installed 7 again on my blank partition in hopes I could access my other partion. No dice. So my question to yall is how can I fix my original filesystem or at least get to the stuff on it. In the new 7 install the old partion does not even have a drive letter. That is my sad story any help would be apreciated.

  Read the article

• Can I take my ReadyNAS drive in Raid1 and plug it straight into new different machine?

  - by jacko

  I would assume that I can just take my HDD out of my NAS (in raid1 mirror) and plug it into another enclosure and have it work off the bat but I'd like to make sure... Any ideas? Edit: My current setup is a Netgear ReadyNAS in (hardware) raid1. I'm hoping to replace this with a home theatre type PC (possibly running Ubuntu), and would like to migrate my data without having to do a bulk transfer over my network between the 2 machines. Can anyone confirm the case for the Netgear ReadyNAS? Edit: Ok after further reading it seems that the ReadyNAS Duo formats my drive as ext3 in 16k blocks. There are instructions for mounting a drive into a linux box here: Mounting Sparc-based ReadyNAS Drives in x86-based Linux There is also talk about a linux image here: ReadyNAS Data Recovery - VMware recovery tool I'm not sure whether this means they ReadyNAS actually implements software raid under the hood, or what? So it appears like it IS do-able, but do any of you linux guru's know whether this is viable and whether the fact that they are in raid 1 affect matters?

  Read the article

• My Computer hangs for a few minutes just after startup, and then is fine.

  - by EvilChookie

  So I just built myself a reasonably beefy computer, and I installed Windows 7 on it. However, I start the machine up each morning and within a few minutes, the computer will semi hang. That is the mouse is responsive, and most of the time I can open task manager, or a new tab in Chrome. Occasionally windows will be labelled as 'Not responding'. Then, the machine will get over it's problem, and will be nice and quick until I turn it off. Here's my specs: CPU: AMD Phenom-II X4 955 Black (Quad Core, 3.2ghz) RAM: 4GB of DDR3 1300 MOBO: ASUS M4A785T-M (Latest BIOS) HARD DRIVES: 2x1TB Western Digital Caviar Blacks in RAID-0. OS: Windows 7 Ultimate x64. GPU: ASUS GT240 1GB. I believe this issue relates to the RAID array, as I didn't have the lockup problem before I created the array. I purchased a second drive and reformatted after creating a RAID array, since the single drive was a little on the pokey side (compared to the rest of the computer). What I have tried: Updated Raid Drivers Malware checks Windows Updates Unecessary Services CPU and Disk activity appears to be low (via Resource Monitor) No strange errors in the error log. Any thoughts?

  Read the article

• SSD seems dead after wakeup from Windows Sleep, BIOS stalls but doesn't find it anymore

  - by Abel

  The morning, the following scary scenario happened: I woke up my Windows system Typed in my username and got an error (something like "could not load security xxx", but unsure of exact wording) System auto-restarted after cliking OK It didn't boot up anymore to the SSD with Windows 7 OS (I have another disk I can boot to, but that doesn't see the disk either). Obviously, this happened right after I instantiated a backup procedure, which hasn't succeeded either. The BIOS can't find the drive when I connect to SATA. And it can't find the drive when I connect it to SAS. I have a Dell Workstation T7400, most recent BIOS (version A06), version of SAS Host Bus Adapter BIOS (HBA) is MPTBIOS 6.14.10.00 (2007.09.29) from LSI Logic Corp. Other findings: When connecting to SATA, the DELL Logo screen stays really long (5 minutes) and then at the end of POST it says that a drive is not found When connecting to SAS, the SAS HBA initializing phase takes long (2 minutes, against normally 15 seconds) When running Dell Diagnostics, it doesn't finish and gives the error Exception occurred in module MPCACHE.MDM file "IOAPICSP.ASM" line 1645. I contacted Dell. On their advice I tried different slots and different cables to no avail. I use an APIC battery power, spikes in the power are thus unlikely. My conclusion so far: the disk is dead. I need this disk very badly because it contains the last few days of important development of which not all code was checked in the moment this happened. Are there any ways to recover dead SSD drives? The drive is a new X25-M G2 160GB model SSDSA2M160G2GC 2.5" in an extension bay and has been running without issues for 3 months on SAS.

  Read the article

• Sony PMB causing failure to load Windows 7 Pro 64-bit normally or even Safe Mode

  - by Wesley

  After installing Sony's Picture Motion Browser on my desktop with Windows 7 Pro x64, it always goes to Startup Repair due to Windows 7 failing to start. This always happens after I try to install it. I've installed with all unnecessary programs closed and all disk drives and unnecessary usb ports empty. I don't exactly know what is causing the problem. Any ideas? My desktop is an HP m8530f. http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01469325&tmp_task=prodinfoCategory&lc=en&dlc=en&cc=us&product=3740333&lang=en Only upgrades are an HD4350 and a 500W PSU. EDIT: Windows 7 cannot start now. I'm currently running diagnostic tests from the BIOS. EDIT: Here are the problem details. Problem Signature: Problem Event Name: StartupRepairOffline Problem Signature 01: 6.1.7600.16385 Problem Signature 02: 6.1.7600.16385 Problem Signature 03: unknown Problem Signature 04: 21201022 Problem Signature 05: AutoFailover Problem Signature 06: 8 Problem Signature 07: CorruptFile OS Version: 6.1.7600.2.0.0.256.1 Local ID: 1033 CONCLUSION: So, I think Sony PMB may have caused some sort of corruption in the system files. So if you have Windows 7 and plan on installing Sony PMB, find a Vista or XP machine to install on.

  Read the article

• Cannot find wireless driver for HP laptop

  - by rodey

  I have an HP laptop (model: dv7-1267cl, Windows 7 64-bit Home Premium) and I cannot find the wireless driver for the laptop. I am need of a different version because my wireless connection under Windows is flaky and unreliable. I have problems printing to my wireless printer and logging in to and using several sites like reddit.com, phoenix.edu and facebook.com - I get several "page cannot be displayed" messages while using my wireless connection. I disable my wireless adapter and use an ethernet cable and it all works fine. I also used an Ubuntu Live CD to confirm that there is not a problem with the hardware. This is software/driver issue. The drivers were auto installed by the OS. The Device Manager shows the wireless adapter as Atheros AR5009 802.11 a/g/n WiFi Adapter. I have checked the HP website for my laptop and they do not have wireless drivers listed for that model wireless adapter. I have also checked with atheros.com and I do not see my model adapter on their list of available hardware. Device Manager lists the Hardware ID's for my adapter as: PCI\VEN_168C&DEV_002A&SUBSYS_1381103C&REV_01 PCI\VEN_168C&DEV_002A&SUBSYS_1381103C PCI\VEN_168C&DEV_002A&CC_028000 PCI\VEN_168C&DEV_002A&CC_0280 A search for the first Hardware ID turned up this question from experts-exchange.com. tl;dr A driver does not exist for that model adapter.

  Read the article

• Permission problem with Git (over SSH) on FreeBSD

  - by vpetersson

  We're having permission problem with Git on FreeBSD. The setup is fairly straight forward. We have a few different repos on the same server. For simplicity, let's say they reside in /git/repo1 and /git/repo2. Each repo is owned by the user 'git' and a self-titled group (eg. repo1). The repo is configured with g+rwX access. Every user who commits to the repository is also member of the group for the repo (eg. repo1). The Git repositories all have 'sharedRepository = group' set. So far so good, all users can check out the code from the repositories, and the first user can commit without any problem. However, when the next user tries to commit to the repositories, he will receive a permission error. We've been banging our heads with this issue for some time now, and the only way we've managed to resolve it is by running the following script between commits (which is obviously very inconvenient): find /git/repo1 -type d -exec chmod g+s {} \; chmod -R g+rwX /git/repo1 chown -R git:repo1 /git/repo1/ cd /git/repo1 git gc Anyone got a clue to where the problem lies?

  Read the article

• Are These Parts compatible?

  - by ell

  I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

  Read the article

• MD RAID 1 with external bitmap doesn't fully resync

  - by user64744

  I have an interesting configuration: dual boot system with a RAID 1 that needs to be visible in both Windows and Linux. The Windows install is Win 7 Enterprise, and the Linux install is Kubuntu 10.04. To get the RAID to work, I set it up using Windows's "Dynamic Disks" RAID 1, and brought it up in Linux using MD with no persistent superblock, and a write-intent bitmap on another partition. (Without this bitmap, MD had no way of knowing that the array was in sync, and would do a complete resync every time the array started.) The array is assembled like so: mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 I expected that the first time I ran this command, it would resync the array, write out a bitmap with no dirty chunks, and all would be good. This wasn't the case: after completing the resync, the bitmap was mostly clean, but about 5% dirty blocks remained, as revealed by mdadm -X /var/local/md1.bitmap I didn't mount the filesystem on /dev/md1 or touch it in any other way. I then found that stopping and restarting the array: mdadm --stop /dev/md1 mdadm --build /dev/md1 -l 1 -n 2 -b /var/local/md1.bitmap /dev/sdb2 /dev/sdc2 did indeed read in the bitmap, with an ensuing resync that went quickly because most of the blocks were marked clean. The confusing part is that this resync further reduced the number of dirty blocks, but still did not remove all of them. By repeatedly stopping and restarting I could slowly bring the dirty block count down to around 0.6%, where it seemed to level out. Any ideas what could be causing this? It smells to me of a race condition somewhere that leads to blocks either being skipped over during synchronization or not properly cleared from the bitmap, but I really have no evidence to prove this. It doesn't look like hardware issues since both drives are new and have zero read errors and reallocated sectors reported by smartctl -a.

  Read the article

• File system concepts (df command)

  - by mkab

  I'm finding it difficult to understand some stuffs about the df command. Suppose I type df and I have the following output Filesystem 1k-blocks Used Avail Capacity Mounted on /dev/da0s1 some number some number number percentage /win /dev/da0s2 some number some number number percentage /win/home /dev/da0s3a some number some number number percentage / devfs some number some number number percentage /dev /dev/da0s3g some number some number number percentage /local /dev/da0s3h some number some number -number 102% /reste /dev/da0s3d some number some number number percentage /tmp /dev/da1s3f some number some number number percentage /usr /dev/da1s3e some number some number number percentage /var /dev/da1s1a some number some number number percentage /public Are the answers to the following questions correct? How many physical drives do I have? Ans: 2. da0s1 and da1s1 How many physical partitions on each disk? Ans: 8 for da0s1 and 1 for da1s1 How many BSD partition on each physical partition Ans: Impossible to determine. We have to use the -T to determine its type How is it possible for the file system /dev/da0s3h filled at 102%? And where is this overflowed data written?Ans: I have no idea for this one Thanks.

  Read the article

• Should I partition a 1TB Hard Disk whose primary use is media storage?

  - by Senthil

  I am going to get a 1TB hard disk. I will be storing 1080p or 720p movies, high-bitrate music and pictures in it. I use my PC 90% of the time only to play/listen/see those. I am running out of space in my current HD so I am getting another one. My specs are 2.7GHz Dual Core, 512MB GeForce 9400GT, 2GB DDR2 RAM and all the proper matroska codecs/players. I guess that is enough to play 1080p movies withough a glitch, given an ideal hard disk. I've read about proper partitioning giving performance improvement etc.. I don't want my hard disk to be the bottleneck. Can someone tell me whether I should partition my 1TB hard disk into many drives? If I should, what is the ideal size of each partition? Smooth playing of movies is very important to me. Once I start filling up the disk, there is no turning back. So I want to get it right before I start. Thanks.

  Read the article

• Resize Win2003 system+boot partitions to bigger disks & different controller?

  - by ane

  Have an old Win2003 server with 1 SCSI hard drive partitioned as follows: D: boot (includes D:\ntldr, boot.ini, etc.) C: system (includes C:\WINDOWS) Want to move the whole system to new hardware with bigger drives and different controllers. Specifically, C: to a 300GB SAS drive, and D: to a 2TB SATA drive. Tried: VMWare Converter - VMWare Server - Diskpart Result: Diskpart refuses to resize system or boot disks VMWare Converter - VMWare Server - GParted Result: Will not boot (see http://serverfault.com/questions/219868/resize-ntfs-system-partitions-with-gparted ) Attach original VMWare disk to a duplicate VMWare install - Diskpart Result: Will not boot (goes to Directory Services Restore mode) Backup Exec System Recovery Server Edition 2010 with Restore Anywhere (tried restoring both to VMWare and to the bare system, without VMWare) Result: Windows Boot error: Could not read from the selected boot disk. Check boot path. Supposedly this is a boot.ini problem, so I try bootcfg /rebuild from the recovery console. Says it can't find windows partition so it can't rebuild. Thought about Ghost but it's completely different hardware/controllers that we're restoring to, so I doubt it would boot. Reinstalling Windows from scratch is not an option due to critical custom software heavily embedded on the original machine. Has anyone been in a similar situation (with unusual boot/system partitions) before and figured out how to resize onto different disks?

  Read the article

• Domain workstation acting up and I can't track it down.

  - by DevNULL

  I have a developer with a Windows XP (SP2) 64 bit machine. If the machine is left on overnight (or any period of time longer than 5-6 hours) it takes 2-3 minutes to open any local drive and his network drives are no longer accessible. Here's what the system logs report... Any Help BTW: The problem just started a week ago and nothing has changed on the domain controller / AD or his machine. --- ERROR 1 Event Type: Error Event Source: NETLOGON Event Category: None Event ID: 5719 Date: 6/8/2010 Time: 9:17:26 AM User: N/A Computer: BFC1 Description: This computer was not able to set up a secure session with a domain controller in domain UR due to the following: There are currently no logon servers available to service the logon request. This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator. ADDITIONAL INFO If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: 5e 00 00 c0 ^..A --- ERROR 2 The machine-default permission settings do not grant Local Activation permission for the COM Server application with CLSID {555F3418-D99E-4E51-800A-6E89CFD8B1D7} to the user NT AUTHORITY\LOCAL SERVICE SID (S-1-5-19). This security permission can be modified using the Component Services administrative tool. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. --- ERROR 3 Event Type: Error Event Source: RemoteAccess Event Category: None Event ID: 20106 Date: 6/8/2010 Time: 10:12:18 AM User: N/A Computer: BFC1 Description: Unable to add the interface {E76F0A78-7A0B-4EBB-A081-BA3BD452FC4C} with the Router Manager for the IP protocol. The following error occurred: Cannot complete this function. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. Data: 0000: eb 03 00 00 e...

  Read the article

• Is USB supported in safe mode on XP?

  - by Hugh Allen

  According Microsoft, "Universal Serial Bus Devices Do Not Work in Safe Mode" under XP. However, in my testing this is incorrect. USB keyboards, mice and flash drives seem to work fine in safe mode (I made sure the BIOS was not providing support). This makes sense because a failure of a standard input device would be, in Microsoft parlance, a "bad user experience". So, Is USB supported in safe mode on XP? If your answer is no (agreeing with Microsoft), please provide a test case, preferably in a virtual machine, where a standard HID keyboard or mouse fails. Please state hardware / BIOS / OS configuration. Note that you will need a PS/2 keyboard attached in addition to your USB device(s) in order to use the boot menu. Virtual machine software usually emulates a PS/2 keyboard. Alternatively, you could add the /safeboot switch to boot.ini. If your answer is yes, please provide a link to some supporting documentation (either from Microsoft or someone authoritative). Your answer might be "devices X, Y and Z are supported but nothing else", in which case also give a link.

  Read the article

• Does a mini PCIe SSD fit into a Acer Aspire One?

  - by Narcolapser

  Question: What, if any, mini PCIe SSDs fit into the mini PCIe slot of the Acer Aspire one AOD250? Info: I have an Aspire One and I've been considering loading it with an SSD. The mini PCIe drives fascinate me and so I want to try that approach. Also they tend to be cheaper and not much slower. (at least not on Read time which matters more for a netbook) But I've heard that some times computers don't support certain mini PCIe cards. And I was wondering if anyone knew about the Aspire One? I tried asking Acer tech support, but they didn't know jack and spent the whole time informing that I would have to support my Ubuntu install on my own, which I was. Anyway. Rant Aside, I'm looking at this drive: http://www.newegg.com/Product/Product.aspx?Item=N82E16820183252 It states it is exclusively for the Eee PC. now does that mean It was designed for the Eee PC but will work in my netbook. or is something going to go wrong? (like right now my concern is it physically not fitting.) Any information would be appreciated. o7

  Read the article

• Intel ICH9/10R raid 5 drive failure

  - by davpen

  About a year ago I was using the native Intel ICH9R Raid 5 an Intel P35 based motherboard. The system was running Vista x64 and when one of the drives failed Vista blue screened on boot until I had figured out which drive had failed and removed it (a rather nerve racking hit and miss affair). The same thing happened some months later on another similar system so it wasn't a once off. This wasn't the robust raid 5 drive failure behavior that I would have hoped for and expected. I moved to Highpoint Rocketraid 2300 and haven't had any problems although I have yet to have a drive fail with this set up. But I am now looking to build a new system based on an i7 and Windows 7. At the moment Highpoint doesn't have drivers for Windows 7 so I am considering moving back to the on board Intel Raid. Yes I know I that I might get away with using the Vista drivers but I don't really want to take that chance with critical data. The question then is has anyone else experienced a drive failure with Intel raid and how did the OS and drivers handle it? Is it safe to go back?

  Read the article

• Mounting a VirtualBox shared folder on boot with fstab in OpenSuse 11.3

  - by ccook

  I have followed the steps found here, however, the share is not mounted on boot. The share will mount if i run 'mount -a' after booting. Why would the share not mount on boot? 1 - Set up a Virtual Machine and install OpenSUSE 11.2 2 - Create a shared folder on host (HostFolder) 3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices Shared Folders... 4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper install make gcc kernel-source kernel-hosttype/default-devel 5 - Run the Virtual Machine and go to Devices Guest Additions This mounts an iso image in your OpenSUSE guest. 6 - Open a root terminal and run cd /usr/src/linux make oldconfig && make prepare && make scripts && make dep cp ../linux-obj/$HOSTTYPE/default/Module.symvers . make prepare A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. * 7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image. 8 - Create shared folder in OpenSUSE (GuestFolder) 9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access. 10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0 11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a

  Read the article

• gitweb- fatal: not a git repository

  - by Robert Mason

  So I have set up a simple server running debian stable (squeeze), and have configured git. Using gitolite, I have all functionality (at least the basic clone/push/pull/commit) working. Installation of gitweb went without any issues. However, when I access gitweb, I get a gitweb screen without any repos listed. # tail -n 1 /var/log/apache2/error.log [DATE] [error] [client IP_ADDRESS] fatal: Not a git repository: '/var/lib/gitolite/repositories/testrepo.git' # cd /var/lib/gitolite/repositories/testrepo.git # ls branches config HEAD hooks info objects refs Here is what I see in /var/lib/gitolite/projects.list: testrepo.git And in /etc/gitweb.conf: # path to git projects (<project>.git) $projectroot = "/var/lib/gitolite/repositories"; # directory to use for temp files $git_temp = "/tmp"; # target of the home link on top of all pages #$home_link = $my_uri || "/"; # html text to include at home page $home_text = "indextext.html"; # file with project list; by default, simply scan the projectroot dir. $projects_list = "/var/lib/gitolite/projects.list"; # stylesheet to use $stylesheet = "gitweb.css"; # javascript code for gitweb $javascript = "gitweb.js"; # logo to use $logo = "git-logo.png"; # the 'favicon' $favicon = "git-favicon.png"; What is missing?

  Read the article

• hp proliant dl360 disk diagnostic issue

  - by user1039384

  We recently got two used drives (15000) and installed on our HP proliant dl360 G5 server. Created RAID1 and used HP SmartStart CD to perform diagnostics. Interestingly, the Diagnostic tab immidiately fails on Logical drive testing saying the Disk1 should be replaced, while the Test tab successfully runs all the complete tests on both disks and does not find any issue. At the meantime, when booting to esxi 5, vSphere periodically shows the Disk1 as Unknown and Logical drive in recovery process. This happens every 5-10 minutes. Here is the log from HP SmartScan diagnostic: 1 - Device, Test: Logical Drive 1, Storage Controller in Slot 0 1 - Description: The controller has reported a critical error in the drive error log. 1 - Recommended Repair: This drive should be replaced. 1 - Failed Count: 44 1 - Error code: F157 There is also another error log record (see below): 2 - Device, Test: test_components/libstorage.so ID 2 - Description: An unexpected exception occurred while performing an operation. Exception message: CISS_StatusHandler::evaluate: commandStatus = 4 (INVALID); hexdump of CISS_ErrorInfo: 00000000: __ __ 04 __ 20 __ __ __ __ __ __ __ __ __ __ __ .... ... ........ 00000010: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ 00000020: __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ __ ........ ........ Device: Hard Drive 2, Storage Controller in Slot 0 Property name: Bad Target Count 2 - Recommended Repair: Reboot or restart Insight Diagnostics. Retry the test. If the problem persists, upgrade to the latest version of Insight Diagnostics. 2 - Failed Count: 48 2 - Error Code: F62 Note that rebooting didn't help and I was running the latest diagnostic software version. Anyone has a clue? Is this a real disk issue? BTW, the controller is Smart Array E200i Thanks in advance

  Read the article

• Tidy up old Windows Server Backup snapshots

  - by dty

  Hi, I'm running wbadmin from a scheduled job, backing up my C: and D: drives to my E: and (I believe!) including the system state: wbadmin start backup -backuptarget:e: -include:c:,d: -allCritical -noVerify -quiet I'd like to delete old backups, but I'm concerned that all the information I can find says to use wbadmin to delete old system state backups, and vssadmin to delete other backups. As far as I know, my backups ARE system state backups, but are using VSS on E: for storage, so I'm worried about trying either of these techniques for fear of losing all my backups. This is a home network, so I don't have a spare server to test this on. I'm also happy to simply restrict the space used on E:, but I can't make sense of the difference between the /for and /on parameters of the relevant vssadmin command. For reference, here's the output of vssadmin show shadows: Contents of shadow copy set ID: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} Contained 1 shadow copies at creation time: 07/01/2011 08:12:05 Shadow Copy ID: {xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx} Original Volume: (E:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Volume: \\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy83 Originating Machine: x.y.com Service Machine: x.y.com Provider: 'Microsoft Software Shadow Copy provider 1.0' Type: DataVolumeRollback Attributes: Persistent, No auto release, No writers, Differential [... repeated a lot...] vssadmin show shadowstorage: Shadow Copy Storage association For volume: (C:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Storage volume: (C:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Used Shadow Copy Storage space: 0 B Allocated Shadow Copy Storage space: 0 B Maximum Shadow Copy Storage space: 5.859 GB Shadow Copy Storage association For volume: (D:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Storage volume: (D:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Used Shadow Copy Storage space: 0 B Allocated Shadow Copy Storage space: 0 B Maximum Shadow Copy Storage space: 40.317 GB Shadow Copy Storage association For volume: (E:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Shadow Copy Storage volume: (E:)\\?\Volume{xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx}\ Used Shadow Copy Storage space: 168.284 GB Allocated Shadow Copy Storage space: 171.15 GB Maximum Shadow Copy Storage space: UNBOUNDED wbadmin get versions: Backup time: 07/01/2011 03:00 Backup target: 1394/USB Disk labeled xxxxxxxxx(E:) Version identifier: 01/07/2011-03:00 Can Recover: Volume(s), File(s), Application(s), Bare Metal Recovery, System State [... repeated a lot...]

  Read the article

• Using psftp to upload and download files

  - by macha

  Hello I am trying to upload and download files from my desktop to my server. Now after some search I did download psftp. I used to use filezilla earlier, but I cannot install it on my desktop due to a few reasons. Since psftp (similar to putty) is just an executable for file transfer. So now after going through this link http://www.math.tamu.edu/~mpilant/math696/psftp.html. I understood that put and get are two commands I would use to download and upload files. Now when I logon to the server and say get filename, it actually is throwing back an error "local: unable to open filename". I tried that with other files too, and I end up getting the same error. The psftp.exe file is on my desktop. The process that I am using is I double click the .exe file open "servrname" cd /path/where/files/are get "filename" And I get this error "local: unable to open filename". Am I making a mistake or is it a problem with this executable?

  Read the article

• How to restore windows.old for windows 7

  - by Jim Thio

  I reinstall windows. Then I regret that and want to go back. Fortunately the old windows is stored at windows.old I follow the instruction in http://support.microsoft.com/kb/971760 I did it all with small catches When I insert the windows 7 installer, the drive for installer is X and my hard disk is D rather than C. However, on normal windows operation the drive is C. Only when I boot through CD the partition is assigned to the letter D. There is no file bootsect on my windows installer So I can't do **D:\boot\bootsect /nt60 c:** Which should be changed to X:\boot\bootsect /nt60 C: or X:\boot\bootsect /nt60 D: depending on what it really does. As I said if I boot through windows dvd my hard disk letter is D but normally it's C. I am not even sure what that bootsect does anyway. I also can't do this one Attrib –h –s –r boot.ini.saved Copy boot.ini.saved boot.ini There is no file boot.ini or boot.ini.saved It's hidden but I don't see it if I try to look unhidden files either. Because I simply switch from windows 7 to windows 7 and the directory for windows don't change c:\windows I thought it should still work. Well, it doesn't. When windows restart it only goes to the logo and then restart the computer.

  Read the article

• Create a partition table on a hardware RAID1 drive with [c]fdisk

  - by Lev Levitsky

  My question is, is there a reason for this not to work? Details: I have two 500 Gb drives, and my motherboard RAID support, so I created a RAID1 array and booted from a Linux live medium. I then listed the disks and, apart from the obvious /dev/sda, /dev/sdb, etc. there was /dev/md126 which, I figured, was the mirrored "virtual" drive. Its size was 475 Gb; I had seen that the size of the array would be smaller than 500 Gb when I was creating it, so no surprise there. I did cfdisk /dev/md126, created the necessary partitions and chose write. It's been about half an hour now, I think. It doesn't seem like it's ever going to finish. The only thing about cfdisk in dmesg is that it's "blocked for more than 120 seconds". Doing fdisk -l /dev/md126 in another terminal I see all three partitions I created and a note that "Partition 1 does not start on a physical sector boundary". The table is lost after reboot, though. I tried to partition /dev/sda individually, and it worked, the table was written in about a second. The "not on a physical sector boundary" message is there, too. EDIT: I tried fdisk on /dev/sda, then there were no messages about sector boundaries. After a reboot, I am able to use mkfs on /dev/dm126p1, etc. fdisk shows that /dev/md126 has the same partitions as /dev/sda (but /dev/sdb doesn't have any). But at some point ("writing superblock and filesystem accounting information") mkfs is also blocked. Using it on sda1 results in a "partition is used by the system" error. What can be the problem? EDIT 2: I booted a freshly updated system from a pendrive and was able to create partition table and filesystems on /dev/md126 without any apparent problems. Was it an issue with the support of the hardware? My MB is Asus P9X79.

  Read the article

• Can't get past bootcamp Windows logo, freezes immediately after picking boot partition -- Windows 7

  - by cksubs

  Hi, I had a fine install of Windows 7 alongside Snow Leopard. I had a power outage, and Windows restarted. When I booted via the "Hold Option" sceen, it started hanging at the grayscale "Windows logo" (squares) that comes up after picking the Windows drive from the bootcamp loader (the Windows version of the grayscale Apple logo when OS X loads). I think this happened once before, and installing rEFIt helped. I did that, but it continued to hang at the same point. I finally got fed up with it and erased the Windows partition via Disk Utility. I then reinstalled Windows 7 x64 from DVD to the fresh partition. Seemed fine. Ran Windows Update then restarted. FFFFFFFFF. Hangs in the same place. What can I do? Like I said, I already have rEFIt installed. Booting the Windows 7 install CD results in the same infinite loading error. I don't have a spare Snow Leopard disk handy.

  Read the article

• How to best convert a fully encrypted drive into a Virtual Machine?

  - by SiegeX

  I have a Windows XP laptop that uses GuardianEdge's Encryption Plus to fully encrypt the drive from bootup. What I would like to do is install a much larger (unencrypted) hard drive with Windows 7 on it and turn this fully encrypted drive into a Virtual Machine that can be ran in either Virtualbox or VMWare on the Windows 7 host. I've read many howto's that talk about using an imaging tool like Acronis True Image to image the drive then passing that through VMWare's VCenter Converter to turn it into a format that VMWare can understand. Unfortunately this seems to all far apart when you are dealing with a fully encrypted drive because Acronis cannot recognize the file system and attempts to do a sector-by-sector copy of the entire hard drive. This is extremely wasteful since the drive is 120GB but the file system is only using 10GB of that. Even if I were OK with going with an inefficient 120GB sector-by-sector copy, I'm not sure that this would even work under VMWare or Virtualbox. Unfortunately, the Guardian Edge boot-time login comes up only after the hard drive has been selected as the boot device; preventing me from being able to decrypt the drive prior to booting an Acronis True Image CD so that it can recognize the underlying file system. I'm sure I'm not the first person to want to do this but I am having a heck of a time finding solutions to this problem. All suggested/answers welcomed. Thanks

  Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >