Search Results

Search found 8021 results on 321 pages for 'resource monitoring'.

Page 260/321 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

  • long access times and errors in iis application

    - by user55862
    I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

    Read the article

  • Why do I see a large performance hit with DRBD?

    - by BHS
    I see a much larger performance hit with DRBD than their user manual says I should get. I'm using DRBD 8.3.7 (Fedora 13 RPMs). I've setup a DRBD test and measured throughput of disk and network without DRBD: dd if=/dev/zero of=/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 4.62985 s, 116 MB/s / is a logical volume on the disk I'm testing with, mounted without DRBD iperf: [ 4] 0.0-10.0 sec 1.10 GBytes 941 Mbits/sec According to Throughput overhead expectations, the bottleneck would be whichever is slower, the network or the disk and DRBD should have an overhead of 3%. In my case network and I/O seem to be pretty evenly matched. It sounds like I should be able to get around 100 MB/s. So, with the raw drbd device, I get dd if=/dev/zero of=/dev/drbd2 bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 6.61362 s, 81.2 MB/s which is slower than I would expect. Then, once I format the device with ext4, I get dd if=/dev/zero of=/mnt/data.tmp bs=512M count=1 oflag=direct 536870912 bytes (537 MB) copied, 9.60918 s, 55.9 MB/s This doesn't seem right. There must be some other factor playing into this that I'm not aware of. global_common.conf global { usage-count yes; } common { protocol C; } syncer { al-extents 1801; rate 33M; } data_mirror.res resource data_mirror { device /dev/drbd1; disk /dev/sdb1; meta-disk internal; on cluster1 { address 192.168.33.10:7789; } on cluster2 { address 192.168.33.12:7789; } } For the hardware I have two identical machines: 6 GB RAM Quad core AMD Phenom 3.2Ghz Motherboard SATA controller 7200 RPM 64MB cache 1TB WD drive The network is 1Gb connected via a switch. I know that a direct connection is recommended, but could it make this much of a difference? Edited I just tried monitoring the bandwidth used to try to see what's happening. I used ibmonitor and measured average bandwidth while I ran the dd test 10 times. I got: avg ~450Mbits writing to ext4 avg ~800Mbits writing to raw device It looks like with ext4, drbd is using about half the bandwidth it uses with the raw device so there's a bottleneck that is not the network.

    Read the article

  • Is dual-booting an OS more or less secure than running a virtual machine?

    - by Mark
    I run two operating systems on two separate disk partitions on the same physical machine (a modern MacBook Pro). In order to isolate them from each other, I've taken the following steps: Configured /etc/fstab with ro,noauto (read-only, no auto-mount) Fully encrypted each partition with a separate encryption key (committed to memory) Let's assume that a virus infects my first partition unbeknownst to me. I log out of the first partition (which encrypts the volume), and then turn off the machine to clear the RAM. I then un-encrypt and boot into the second partition. Can I be reasonably confident that the virus has not / cannot infect both partitions, or am I playing with fire here? I realize that MBPs don't ship with a TPM, so a boot-loader infection going unnoticed is still a theoretical possibility. However, this risk seems about equal to the risk of the VMWare/VirtualBox Hypervisor being exploited when running a guest OS, especially since the MBP line uses UEFI instead of BIOS. This leads to my question: is the dual-partitioning approach outlined above more or less secure than using a Virtual Machine for isolation of services? Would that change if my computer had a TPM installed? Background: Note that I am of course taking all the usual additional precautions, such as checking for OS software updates daily, not logging in as an Admin user unless absolutely necessary, running real-time antivirus programs on both partitions, running a host-based firewall, monitoring outgoing network connections, etc. My question is really a public check to see if I'm overlooking anything here and try to figure out if my dual-boot scheme actually is more secure than the Virtual Machine route. Most importantly, I'm just looking to learn more about security issues. EDIT #1: As pointed out in the comments, the scenario is a bit on the paranoid side for my particular use-case. But think about people who may be in corporate or government settings and are considering using a Virtual Machine to run services or applications that are considered "high risk". Are they better off using a VM or a dual-boot scenario as I outlined? An answer that effectively weighs any pros/cons to that trade-off is what I'm really looking for in an answer to this post. EDIT #2: This question was partially fueled by debate about whether a Virtual Machine actually protects a host OS at all. Personally, I think it does, but consider this quote from Theo de Raadt on the OpenBSD mailing list: x86 virtualization is about basically placing another nearly full kernel, full of new bugs, on top of a nasty x86 architecture which barely has correct page protection. Then running your operating system on the other side of this brand new pile of shit. You are absolutely deluded, if not stupid, if you think that a worldwide collection of software engineers who can't write operating systems or applications without security holes, can then turn around and suddenly write virtualization layers without security holes. -http://kerneltrap.org/OpenBSD/Virtualization_Security By quoting Theo's argument, I'm not endorsing it. I'm simply pointing out that there are multiple perspectives here, so I'm trying to find out more about the issue.

    Read the article

  • HAProxy + Percona XtraDB Cluster

    - by rottmanj
    I am attempting to setup HAproxy in conjunction with Percona XtraDB Cluster on a series of 3 EC2 instances. I have found a few tutorials online dealing with this specific issue, but I am a bit stuck. Both the Percona servers and the HAproxy servers are running ubuntu 12.04. The HAProxy version is 1.4.18, When I start HAProxy I get the following error: Server pxc-back/db01 is DOWN, reason: Socket error, check duration: 2ms. I am not really sure what the issue could be. I have verified the following: EC2 security groups ports are open Poured over my config files looking for issues. I currently do not see any. Ensured that xinetd was installed Ensured that I am using the correct ip address of the mysql server. Any help with this is greatly appreciated. Here are my current config Load Balancer /etc/haproxy/haproxy.cfg global log 127.0.0.1 local0 log 127.0.0.1 local1 notice maxconn 4096 user haproxy group haproxy debug #quiet daemon defaults log global mode http option tcplog option dontlognull retries 3 option redispatch maxconn 2000 contimeout 5000 clitimeout 50000 srvtimeout 50000 frontend pxc-front bind 0.0.0.0:3307 mode tcp default_backend pxc-back frontend stats-front bind 0.0.0.0:22002 mode http default_backend stats-back backend pxc-back mode tcp balance leastconn option httpchk server db01 10.86.154.105:3306 check port 9200 inter 12000 rise 3 fall 3 backend stats-back mode http balance roundrobin stats uri /haproxy/stats MySql Server /etc/xinetd.d/mysqlchk # default: on # description: mysqlchk service mysqlchk { # this is a config for xinetd, place it in /etc/xinetd.d/ disable = no flags = REUSE socket_type = stream port = 9200 wait = no user = nobody server = /usr/bin/clustercheck log_on_failure += USERID #only_from = 0.0.0.0/0 # recommended to put the IPs that need # to connect exclusively (security purposes) per_source = UNLIMITED } MySql Server /etc/services Added the line mysqlchk 9200/tcp # mysqlchk MySql Server /usr/bin/clustercheck # GNU nano 2.2.6 File: /usr/bin/clustercheck #!/bin/bash # # Script to make a proxy (ie HAProxy) capable of monitoring Percona XtraDB Cluster nodes properly # # Author: Olaf van Zandwijk <[email protected]> # Documentation and download: https://github.com/olafz/percona-clustercheck # # Based on the original script from Unai Rodriguez # MYSQL_USERNAME="testuser" MYSQL_PASSWORD="" ERR_FILE="/dev/null" AVAILABLE_WHEN_DONOR=0 # # Perform the query to check the wsrep_local_state # WSREP_STATUS=`mysql --user=${MYSQL_USERNAME} --password=${MYSQL_PASSWORD} -e "SHOW STATUS LIKE 'wsrep_local_state';" 2>${ERR_FILE} | awk '{if (NR!=1){print $2}}' 2>${ERR_FILE}` if [[ "${WSREP_STATUS}" == "4" ]] || [[ "${WSREP_STATUS}" == "2" && ${AVAILABLE_WHEN_DONOR} == 1 ]] then # Percona XtraDB Cluster node local state is 'Synced' => return HTTP 200 /bin/echo -en "HTTP/1.1 200 OK\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is synced.\r\n" /bin/echo -en "\r\n" else # Percona XtraDB Cluster node local state is not 'Synced' => return HTTP 503 /bin/echo -en "HTTP/1.1 503 Service Unavailable\r\n" /bin/echo -en "Content-Type: text/plain\r\n" /bin/echo -en "\r\n" /bin/echo -en "Percona XtraDB Cluster Node is not synced.\r\n" /bin/echo -en "\r\n" fi

    Read the article

  • Core i7 c1e and speedstepping - BSOD on shutdown

    - by DeaconDesperado
    I'm having an interesting problem with my recent Core i7 Digital Audio workstation build that I am curious to see if others have encountered. First, here are the specs on the machine. ASUS P6TD Deluxe Intel X58 Socket LGA1366 MB Intel Core i7-950 3.06Ghz 8M LGA1366 CPU CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 Western Digital Caviar Black WD5001AALS 500GB Plus a couple ASUS optical drives and a 750W Corsair PSU. Running Windows 7 x64. All this is connected to the nefarious Digi 002 firewire audio interface for use with Pro Tools. I following mostly the specs posted by many other I7 users in the digidesign community who pooled their collective knowledge in this thread. Now after completing my build, I fell victim to the "UD5 squeal" described at that forum thread. So taking the advice posted, I disabled c1e advanced halt state and Intel speed stepping (I would likely have done this anyway to maintain a stable clock, power consumption isn't really a relevant concern on this machine.) I enabled XMP to set the ram timings properly as well. What I am experiencing is a BSOD upon shutdown, but only immediately after windows fully exits and ends all processes. The error is a MACHINE_CHECK_EXCEPTION 0x000000. The funny thing is that it is extremely intermitent and only occurs if the shutdown immediately followed a period of relative idleness. It does not a generate a minidump, I suspect because windows monitoring has terminated by the time this error occurs. No damage is evident and one can simply turn off manually and the system will act as though a proper shutdown had occurred. If anything it is a annoyance, I just want to be certain it is not affecting my long term stability. I have read that the i7 950 does not like DRAM voltages past 1.65, but that they are acceptable if they are within .5 of the BLCK setting. I have tried disabling XMP and setting all timings to auto and the problem still manifests in an identical way. It is suspect that the cpu idleness preceding shutdown is the determining factor, as both c1e and speedstepping are both settings intended to modify handling of this state. Any suggestions or prior experiences would be greatly appreciated. EDIT: The behavior very closely resembles what's described in this thread: http://www.tomshardware.com/forum/12003-63-shut-problem-windows The benign nature of it of is identical. I can't seem to download the hotfix cited there however.

    Read the article

  • apcupsd on Linux does not report on APC BackUPS Pro 900

    - by lserni
    From what documentation I could find, the UPS should be (is!) supported by Linux and ought to work with apcupsd. I looked for specific problems such as the infamous Microlink protocol, and found none. I have found a feedback from a guy in UK that reports using this very model on a not-too-different OS version (his OpenSuSE 12.1, mine 12.3 x86_64). The USB port is detected, lsusb reports Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply and lsusb -v -s002:003 confirms and expands: Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x051d American Power Conversion idProduct 0x0002 Uninterruptible Power Supply bcdDevice 0.90 iManufacturer 1 American Power Conversion iProduct 2 Back-UPS RS 900G FW:879.L4 .I USB FW:L4 bNumConfigurations 1 Configuration Descriptor: [...] Interface Descriptor: [...] bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.00 bCountryCode 33 US bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 1134 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0008 1x 8 bytes bInterval 100 Device Status: 0x0000 (Bus Powered) The kernel recognizes this and duly sets up crw------- 1 root root 180, 96 Nov 4 16:11 /dev/usb/hiddev0 As far as I know, everything is as it should be. I have put the standard configuration in /etc/apcupsd/apcupsd.conf (which is Unix-terminated, ASCII-only, no BOM (just in case)) UPSCABLE usb UPSTYPE usb DEVICE (I have also tried commenting out DEVICE, and setting a device of /dev/puppa results in an access attempt to /dev/puppa, not some /var/lib/dev/puppa or /dev/puppa\r\n). Yet, what apcaccess tells me is VERSION : 3.14.10 (13 September 2011) suse CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2013-11-04 16:24:22 +0100 MODEL : STATUS : NOBATT LINEV : 000.0 Volts LOADPCT : 0.0 Percent Load Capacity BCHARGE : 000.0 Percent TIMELEFT : 0.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Low LOTRANS : 000.0 Volts HITRANS : 000.0 Volts It doesn't recognize the model, and reports no battery (and no voltage). This confirms that it's not the Microlink problem, or it would report the battery status, if precious little else. If I disconnect the USB cable, I get an apcupsd message to the effect that communications have been lost; and I get the "communication restored" broadcast too, if I reconnect the cable. apcupsd is monitoring. So everything tells me that it should work -- only it doesn't. Does anyone spot what I'm missing?

    Read the article

  • Ubuntu: Multiple NICs, one used only for Wake-On-LAN

    - by jcwx86
    This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

    Read the article

  • Web application/ site service (like Google App Engine) for PHP/ MySQL and Postgres

    - by Simon
    I would like to find a service similar to Google App Engine for PHP/ MySQL/ Postgres sites/ applications. We host two different types of site. i). PHP/ Mysql/ Zend Framework <VirtualHost *:80> DocumentRoot "/home/websites/website.com/public" ServerName website.com # This should be omitted in the production environment SetEnv APPLICATION_ENV development <Directory "/home/websites/website.com/public"> Options Indexes MultiViews FollowSymLinks AllowOverride All Order allow,deny Allow from all RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ index.php [NC,L] </Directory> </VirtualHost> ii). Matrix CMS - PHP/ Postgres + loads of pear classes <VirtualHost *:80> ServerName server.example.com DocumentRoot /home/websites/mysource_matrix/core/web Options -Indexes FollowSymLinks <Directory /home/websites/mysource_matrix> Order deny,allow Deny from all </Directory> <DirectoryMatch "^/home/websites/mysource_matrix/(core/(web|lib)|data/public|fudge)"> Order allow,deny Allow from all </DirectoryMatch> <DirectoryMatch "^/home/websites/mysource_matrix/data/public/assets"> php_flag engine off </DirectoryMatch> <FilesMatch "\.inc$"> Order allow,deny Deny from all </FilesMatch> <LocationMatch "/(CVS|\.FFV)/"> Order allow,deny Deny from all </LocationMatch> Alias /__fudge /home/websites/mysource_matrix/fudge Alias /__data /home/websites/mysource_matrix/data/public Alias /__lib /home/websites/mysource_matrix/core/lib Alias / /home/websites/mysource_matrix/core/web/index.php/ </VirtualHost> My key requirements are: I don't want to worry/ know/ care about the server/ infrastructure Secure/ up to date software/ os Good monitoring Automatic scalability SLA I apologise for the length of the question. In short all I want to do is i). create vhost, ii). create db iii). install app/ site iv). relax. Thanks. Edit: I include the Matrix vhost because that is the only complication that I cannot really do via a .htaccess file.

    Read the article

  • Best RAID setup for multimedia fileserver?

    - by Mr. Schwabe
    I'm building a fileserver for my small office. We do film and multimedia design. Only 3 clients connected. The server is primarily for local access to graphic assets and video files. I'm looking for advice on hardware and software required. Particularly for the RAID. I have the following objectives: A) merged capacity I'd like all other systems to access the data as a single mapped network drive that has an initial capacity of 10 TB. So perhaps 5x 2TB drives (plus mirror drives for redundancy). B) easy way to increase capacity Thinking long term, I'd like to 'easily' add more drives to the array for a potential two or three fold increase in capacity. So theoretically it could get upto a 30 TB raid array consisting of maybe 15x 2 TB drives of capacity (plus mirror drives for redundancy). C) maximum fault tolerance I want at least 1 mirror drive per capacity drive (in laymen's terms). So if I start with 10 TB / 5x 2TB of capacity, I suppose I would need another another 5x 2TB drives to be mirrors. So 10 drives total. But I'd also like potential for even more redundancy; with upto 2 additional mirrors per 'capacity drive' (and to be able to add them to the array anytime with ease). D) easy way to monitor drive health I'd like an intuitive interface for managing the raid and monitoring drive health The other systems accessing this network drive will be running Windows, but also the odd Ubuntu and MacOS system as well. Are these objectives attainable? What type of RAID setup do you recommend? What hardware will be required? Also what OS do you think this system should be running? Does it really matter? I'm no network admin - just a long time Windoze user, without much Linux experience. That said, I'm not opposed to a Linux solution if it's easy enough and more practical than a Windows OS for this server. Or maybe something such as Openfiler. Budget should hit the sweet spot for value and performance (hence my preference to use 2TB drives). The biggest focus is storage; aside from that the system just needs to keep the drives running optimally with perhaps 2 or 3 clients accessing / writing files at any given time. The hardware quote would start with something like 10x 2TB WD Caviar Blacks; about $1900 for the storage + $x for remaining parts. http://ncix.com/products/index.php?sku=42775&vpn=WD2001FASS&manufacture=Western%20Digital%20WD Your advice is appreciated, thanks!

    Read the article

  • Automatic layout of manual network mapping

    - by Paul
    So I have a small business network mainly consisting of two routed layer-2 domains with a total of ca. 100 devices spread over ca. 2000m² production and office spaces. Typical problems to solve using the graph would be: Over what (cable) path is a PC connected to the server? Where to expect devices connected to a switch port? I want to generate a graph of the physical network topology: Nodes are endpoint devices, switch ports, wall outlets, patch panel ports etc. Edges are cable connections. Ideally, grouping edges (or segments) that pass through the same bundle could be grouped. Also I would like to augment the graph data with automatically gathered data (monitoring state, MAC address, Switch port <- MAC entries to build up parts of the map). At the moment I use graphviz for this inside a Confluence wiki like that: layout = "neato" overlap = scale subgraph { rankdir = "TB" subgraph cluster_r1pf1 { r1pf1 [label="{ Rack 1 PF 1 | { <p1>P1 | <p2>P2 | <p3>P3} }", shape=record] } subgraph cluster_switch1 { switch1 [label="{ Rack 1 Switch 1 | { <p1> P1 | <p1> P1 | <p3> P3} }", shape=record] } r1pf1:p1 -> switch1:p1 (obviously there are dozens of entries omitted here) Problem is: I have a hard time to influence graphviz to generate a bearable layout. Edges overlap so bad that you can't read the diagram anymore. The question is: What other tools (be it interactive like Visio, Omnigraffle or I/O-oriented like graphviz) exist that would allow an easily versionable (as in: Operates on a text file) documentation that is both machine and human readable and editable? Why not OmniGraffle or Visio? Well we don't have Macs and Visio is not available at the moment. To buy it I would need good arguments. Automation would be one of that. But last time I looked, versioning Visio files or even thinking about automatic handling was a nightmare. Related: Network Mapping Tools basically asks the same with a focus on generating the complete graph automatically (but without the need to document cabling connections) Recommendations for automatic computer inventory brings up links of "all-in-one" solutions

    Read the article

  • Deadlock in SQL Server 2005! Two real-time bulk upserts are fighting. WHY?

    - by skimania
    Here's the scenario: I've got a table called MarketDataCurrent (MDC) that has live updating stock prices. I've got one process called 'LiveFeed' which reads prices streaming from the wire, queues up inserts, and uses a 'bulk upload to temp table then insert/update to MDC table.' (BulkUpsert) I've got another process which then reads this data, computes other data, and then saves the results back into the same table, using a similar BulkUpsert stored proc. Thirdly, there are a multitude of users running a C# Gui polling the MDC table and reading updates from it. Now, during the day when the data is changing rapidly, things run pretty smoothly, but then, after market hours, we've recently started seeing an increasing number of Deadlock exceptions coming out of the database, nowadays we see 10-20 a day. The imporant thing to note here is that these happen when the values are NOT changing. Here's all the relevant info: Table Def: CREATE TABLE [dbo].[MarketDataCurrent]( [MDID] [int] NOT NULL, [LastUpdate] [datetime] NOT NULL, [Value] [float] NOT NULL, [Source] [varchar](20) NULL, CONSTRAINT [PK_MarketDataCurrent] PRIMARY KEY CLUSTERED ( [MDID] ASC )WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY] ) ON [PRIMARY] - I've got a Sql Profiler Trace Running, catching the deadlocks, and here's what all the graphs look like. Process 258 is called the following 'BulkUpsert' stored proc, repeatedly, while 73 is calling the next one: ALTER proc [dbo].[MarketDataCurrent_BulkUpload] @updateTime datetime, @source varchar(10) as begin transaction update c with (rowlock) set LastUpdate = getdate(), Value = t.Value, Source = @source from MarketDataCurrent c INNER JOIN #MDTUP t ON c.MDID = t.mdid where c.lastUpdate < @updateTime and c.mdid not in (select mdid from MarketData where LiveFeedTicker is not null and PriceSource like 'LiveFeed.%') and c.value <> t.value insert into MarketDataCurrent with (rowlock) select MDID, getdate(), Value, @source from #MDTUP where mdid not in (select mdid from MarketDataCurrent with (nolock)) and mdid not in (select mdid from MarketData where LiveFeedTicker is not null and PriceSource like 'LiveFeed.%') commit And the other one: ALTER PROCEDURE [dbo].[MarketDataCurrent_LiveFeedUpload] AS begin transaction -- Update existing mdid UPDATE c WITH (ROWLOCK) SET LastUpdate = t.LastUpdate, Value = t.Value, Source = t.Source FROM MarketDataCurrent c INNER JOIN #TEMPTABLE2 t ON c.MDID = t.mdid; -- Insert new MDID INSERT INTO MarketDataCurrent with (ROWLOCK) SELECT * FROM #TEMPTABLE2 WHERE MDID NOT IN (SELECT MDID FROM MarketDataCurrent with (NOLOCK)) -- Clean up the temp table DELETE #TEMPTABLE2 commit To clarify, those Temp Tables are being created by the C# code on the same connection and are populated using the C# SqlBulkCopy class. To me it looks like it's deadlocking on the PK of the table, so I tried removing that PK and switching to a Unique Constraint instead but that increased the number of deadlocks 10-fold. I'm totally lost as to what to do about this situation and am open to just about any suggestion. HELP!! In response to the request for the XDL, here it is: <deadlock-list> <deadlock victim="processc19978"> <process-list> <process id="processaf0b68" taskpriority="0" logused="0" waitresource="KEY: 6:72057594090487808 (d900ed5a6cc6)" waittime="718" ownerId="1102128174" transactionname="user_transaction" lasttranstarted="2010-06-11T16:30:44.750" XDES="0xffffffff817f9a40" lockMode="U" schedulerid="3" kpid="8228" status="suspended" spid="73" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-06-11T16:30:44.750" lastbatchcompleted="2010-06-11T16:30:44.750" clientapp=".Net SqlClient Data Provider" hostname="RISKAPPS_VM" hostpid="3836" loginname="RiskOpt" isolationlevel="read committed (2)" xactid="1102128174" currentdb="6" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="MKP_RISKDB.dbo.MarketDataCurrent_BulkUpload" line="28" stmtstart="1062" stmtend="1720" sqlhandle="0x03000600a28e5e4ef4fd8e00849d00000100000000000000"> UPDATE c WITH (ROWLOCK) SET LastUpdate = getdate(), Value = t.Value, Source = @source FROM MarketDataCurrent c INNER JOIN #MDTUP t ON c.MDID = t.mdid WHERE c.lastUpdate &lt; @updateTime and c.mdid not in (select mdid from MarketData where BloombergTicker is not null and PriceSource like &apos;Blbg.%&apos;) and c.value &lt;&gt; t.value </frame> <frame procname="adhoc" line="1" stmtstart="88" sqlhandle="0x01000600c1653d0598706ca7000000000000000000000000"> exec MarketDataCurrent_BulkUpload @clearBefore, @source </frame> <frame procname="unknown" line="1" sqlhandle="0x000000000000000000000000000000000000000000000000"> unknown </frame> </executionStack> <inputbuf> (@clearBefore datetime,@source nvarchar(10))exec MarketDataCurrent_BulkUpload @clearBefore, @source </inputbuf> </process> <process id="processc19978" taskpriority="0" logused="0" waitresource="KEY: 6:72057594090487808 (74008e31572b)" waittime="718" ownerId="1102128228" transactionname="user_transaction" lasttranstarted="2010-06-11T16:30:44.780" XDES="0x380be9d8" lockMode="U" schedulerid="5" kpid="8464" status="suspended" spid="248" sbid="0" ecid="0" priority="0" transcount="2" lastbatchstarted="2010-06-11T16:30:44.780" lastbatchcompleted="2010-06-11T16:30:44.780" clientapp=".Net SqlClient Data Provider" hostname="RISKBBG_VM" hostpid="4480" loginname="RiskOpt" isolationlevel="read committed (2)" xactid="1102128228" currentdb="6" lockTimeout="4294967295" clientoption1="671088672" clientoption2="128056"> <executionStack> <frame procname="MKP_RISKDB.dbo.MarketDataCurrentBlbgRtUpload" line="14" stmtstart="840" stmtend="1220" sqlhandle="0x03000600005f9d24c8878f00849d00000100000000000000"> UPDATE c WITH (ROWLOCK) SET LastUpdate = t.LastUpdate, Value = t.Value, Source = t.Source FROM MarketDataCurrent c INNER JOIN #TEMPTABLE2 t ON c.MDID = t.mdid; -- Insert new MDID </frame> <frame procname="adhoc" line="1" sqlhandle="0x010006004a58132228bf8d73000000000000000000000000"> MarketDataCurrentBlbgRtUpload </frame> </executionStack> <inputbuf> MarketDataCurrentBlbgRtUpload </inputbuf> </process> </process-list> <resource-list> <keylock hobtid="72057594090487808" dbid="6" objectname="MKP_RISKDB.dbo.MarketDataCurrent" indexname="PK_MarketDataCurrent" id="lock5ba77b00" mode="U" associatedObjectId="72057594090487808"> <owner-list> <owner id="processc19978" mode="U"/> </owner-list> <waiter-list> <waiter id="processaf0b68" mode="U" requestType="wait"/> </waiter-list> </keylock> <keylock hobtid="72057594090487808" dbid="6" objectname="MKP_RISKDB.dbo.MarketDataCurrent" indexname="PK_MarketDataCurrent" id="lock65dca340" mode="U" associatedObjectId="72057594090487808"> <owner-list> <owner id="processaf0b68" mode="U"/> </owner-list> <waiter-list> <waiter id="processc19978" mode="U" requestType="wait"/> </waiter-list> </keylock> </resource-list> </deadlock> </deadlock-list>

    Read the article

  • DCHP and Router load testing

    - by John H
    I manage a campground wifi network with an average of 10 - 60 active users. I have encountered issues where the router starts acting flaky (failing to assign DHCP or failing to pass traffic) without any clear warning (low cpu utilization, etc). I upgraded the router a couple times and ended up with a Netgear ProSafe VPN router that seems to be handling the traffic. The interesting thing is that the Netgear has lower specs than the Buffalo router it replaced, indicating the issue is with the DD-WRT firmware. While I'll be pursuing this issue on the dd-wrt forums, I need a way to test routers. My vision is having 1-2 computers connected on the LAN side and 1-2 computers connected on the WAN side. I want the LAN computers to be generating various type of traffic and connections, as well as requesting DCHP addresses. A few notes: The wireless aspect should be a non-issue. Most clients would connect to a wireless bridge and come into the router through a network cable. I had a monitoring server with Nagios running check_dhcp against the router. This server was connected directly by a network cable, eliminating wifi bridges and other devices from the equation. This question is somewhat related, but not exactly: Load testing wireless LANs I am going to look at IxChariot. While I'd ideally like to use a 1 computer on each side running Linux and preferably free software, I can entertain running Windows, multiple computers, or non-free software. Total bandwidth doesn't seem to be the issue. I can transfer large files all day. Even on the busiest days, the users seemed to only pull ~5Mbps. There is very little "LAN to LAN traffic" and most of it might never have reached the main router. The issue I need to test for seems to be tied to active users, or more appropriately, active sessions. I know active users or active clients is a meaningless term from a router standpoint and wouldn't mind having more appropriate terms to use. Summary: I need a way to test a routers ability in handling traffic from a large number of clients. My current strategy is to purchase a router, deploy it, and see how it fails in the live environment.

    Read the article

  • debian packages version convention

    - by JackWu
    I'm using debian/Ubuntu, and get confused about versions of packages. When using dpkg -l command, I get: ii vim 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor ii vim-common 2:7.3.429-2ubuntu2.1 Vi IMproved - Common files ii vim-runtime 2:7.3.429-2ubuntu2.1 Vi IMproved - Runtime files ii vim-tiny 2:7.3.429-2ubuntu2.1 Vi IMproved - enhanced vi editor - compact version ii virt-what 1.11-1 detect if we are running in a virtual machine ii w3m 0.5.3-5ubuntu1 WWW browsable pager with excellent tables/frames support ii watershed 6 reduce superfluous executions of idempotent command ii wget 1.13.4-2ubuntu1 retrieves files from the web ii whiptail 0.52.11-2ubuntu10 Displays user-friendly dialog boxes from shell scripts ii whoopsie 0.1.33 Ubuntu crash database submission daemon ii wimlib9 1.5.0-1~webupd8~precise Library to extract, create, modify, and mount WIM files ii wimtools 1.5.0-1~webupd8~precise Tools to extract, create, modify, and mount WIM files ii wireless-tools 30~pre9-5ubuntu2 Tools for manipulating Linux Wireless Extensions ii wpasupplicant 0.7.3-6ubuntu2.1 client support for WPA and WPA2 (IEEE 802.11i) ii x11-common 1:7.6+12ubuntu2 X Window System (X.Org) infrastructure ii x11-utils 7.6+4ubuntu0.1 X11 utilities ii xauth 1:1.0.6-1 X authentication utility ii xbitmaps 1.1.1-1 Base X bitmaps ii xclip 0.12-1 command line interface to X selections ii xfonts-encodings 1:1.0.4-1ubuntu1 Encodings for X.Org fonts ii xfonts-utils 1:7.6+1 X Window System font utility programs ii xkb-data 2.5-1ubuntu1.3 X Keyboard Extension (XKB) configuration data ii xml-core 0.13 XML infrastructure and XML catalog file support rc xpdf 3.02-21build1 Portable Document Format (PDF) reader ii xterm 271-1ubuntu2.1 X terminal emulator ii xz-lzma 5.1.1alpha+20110809-3 XZ-format compression utilities - compatibility commands ii xz-utils 5.1.1alpha+20110809-3 XZ-format compression utilities ii zabbix-agent 1:1.8.11-1 network monitoring solution - agent ii zlib1g 1:1.2.3.4.dfsg-3ubuntu4 compression library - runtime ii zlib1g-dev 1:1.2.3.4.dfsg-3ubuntu4 compression library - development ii zsh 4.3.17-1ubuntu1 shell with lots of features The third column is version, but it all messed up in a way I can't understand. I mean, different packages use total different naming specification. Here are the major questions: Why there are ubuntu in them, and there are not? what all the special -~+ mean? alpha and build, dfsg, what are they? Can I just use them casually? vim and other packages have 2:, what does that mean? How version comparison works, since they can be so different? Can anyone please explain this to me? Or where can I find an official document? Thanks in advance.

    Read the article

  • How to get an inactive RAID device working again?

    - by Jonik
    After booting, my RAID1 device (/dev/md_d0 *) sometimes goes in some funny state and I cannot mount it. * Originally I created /dev/md0 but it has somehow changed itself into /dev/md_d0. # mount /opt mount: wrong fs type, bad option, bad superblock on /dev/md_d0, missing codepage or helper program, or other error (could this be the IDE device where you in fact use ide-scsi so that sr0 or sda or so is needed?) In some cases useful info is found in syslog - try dmesg | tail or so The RAID device appears to be inactive somehow: # cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md_d0 : inactive sda4[0](S) 241095104 blocks # mdadm --detail /dev/md_d0 mdadm: md device /dev/md_d0 does not appear to be active. Question is, how to make the device active again (using mdmadm, I presume)? (Other times it's alright (active) after boot, and I can mount it manually without problems. But it still won't mount automatically even though I have it in /etc/fstab: /dev/md_d0 /opt ext4 defaults 0 0 So a bonus question: what should I do to make the RAID device automatically mount at /opt at boot time?) This is an Ubuntu 9.10 workstation. Background info about my RAID setup in this question. Edit: My /etc/mdadm/mdadm.conf looks like this. I've never touched this file, at least by hand. # by default, scan all partitions (/proc/partitions) for MD superblocks. # alternatively, specify devices to scan, using wildcards if desired. DEVICE partitions # auto-create devices with Debian standard permissions CREATE owner=root group=disk mode=0660 auto=yes # automatically tag new arrays as belonging to the local system HOMEHOST <system> # instruct the monitoring daemon where to send mail alerts MAILADDR <my mail address> # definitions of existing MD arrays # This file was auto-generated on Wed, 27 Jan 2010 17:14:36 +0200 In /proc/partitions the last entry is md_d0 at least now, after reboot, when the device happens to be active again. (I'm not sure if it would be the same when it's inactive.) Resolution: as Jimmy Hedman suggested, I took the output of mdadm --examine --scan: ARRAY /dev/md0 level=raid1 num-devices=2 UUID=de8fbd92[...] and added it in /etc/mdadm/mdadm.conf, which seems to have fixed the main problem. After changing /etc/fstab to use /dev/md0 again (instead of /dev/md_d0), the RAID device also gets automatically mounted!

    Read the article

  • long access times and errors in iis application

    - by Jens Olsson
    Hi, I am having an issue with an IIS application (details of environment at the end of the message). The web site works great most of the time and I cannot reproduce any error in our test system. On the live system however with on averare of 5-15 requests per second I have a problem with that some requests (about 0.05%) will take over 300 seconds to complete. The other requests complete withing 5-10 seconds. It seem like if all the errornous requests end up with a Timer_EntityBody error in the error log. I have never seen this as an end user but I guess that they will receive some kind of error message. I am trying to find out what can be causing this errornous behaviour. Any ideas are welcome. I have read something about that there can be an MTU issue if ICMP and MTU protocols are blocked in the firewall. Does that sound reasonable? I have also read about updating to IIS 7 should do the trick. Does it sound reasonable? I think that the problem has another cause but I have no idea of what. I have tried running hte perormance monitor, monitoring for database locks and active transaction counts. I can see some of these in the perfmon log for the MSSQL server (another machine) for example: Active transactions is sometimes peaking and sometimes for long periods Lock waits per seconds is sometimes peaking Transactions per second is sometimes peaking Page IO Latch wait is sometimes peaking Lock wait time (ms) is sometimes peaking But I cannot see that any of these correlate to the errors in the IIS error log. On the IIS server machine I can also see with perfmon that some values peak a few times during a day: Request execution time Avg disk queue length I can neither see that any of these correlate to the errors in the IIS error log. In the below code I have anonymized by replacing some parts with HIDDEN The following can be seen in the access log 2010-10-01 08:35:05 W3SVC1301873091 **HIDDEN** POST /**HIDDEN**/Modules/BalanceModule.aspx - 80 - **HIDDEN** Mozilla/4.0+(compatible;+MSIE+7.0;+Windows+NT+5.1;+.NET+CLR+2.0.50727;+.NET+CLR+3.0.4506.2152;+.NET+CLR+3.5.30729;+.NET4.0C;+.NET4.0E) ASP.NET_SessionId=**HIDDEN** 400 0 64 0 2241 127799 At the same time the following can be seen in the error log: 2010-10-01 08:35:05 **HIDDEN** 1999 **HIDDEN** 80 HTTP/1.0 POST /**HIDDEN**/Modules/BalanceModule.aspx - 1301873091 Timer_EntityBody Test+Pool I can tell the following about the environment: Server: Windows Server 2003 x64 SP2 running on VMWare HTTP Server: IIS v6.0 with ASP.NET 2.0.50727 Antivirus: Trend Micro OfficeScan (Is it a good idea to have this on a server?)

    Read the article

  • Transient network dropout for Xen DomU's

    - by Stephen C
    We've got a CentOS server running a cluster of virtuals. Occasionally the cluster's internal network drops out for a minute or so ... and then comes back. The problem is somehow related to the actual network traffic, but it is not a simple load issue. (The system is generally lightly loaded, and the problem occurs irrespective of actual load.) The setup: CentOS 5.6 on Dom0, various CentOS on the DomU's Hardware - a Dell R710 with a BroadCom NextXpress 2 NIC (sigh) using the latest drivers for the NIC from BroadCom Xen configured to use network-bridge and vif-bridge Some iptable tweaks to route an unrelated port to one of the virtuals. The system has one externally visible IP address, and Dom0 runs an Apache httpd configured with a number of virtual hosts each of which reverse proxies to web servers running on the virtuals. (The virtuals have to be NAT'ed, primarily because we don't have enough allocated public IP addresses.) The symptoms: Works fine most of the time. When someone tries to UPLOAD a large file to one virtuals, the internal network drops out ... for all virtuals: The Dom0 httpd sees a network timeout talking to the backend server on the virtual and reports a 502. A previously established ssh connection from Dom0 to any of the DomU's freezes. Our monitoring shows ping failures for traffic between virtuals. The Xen consoles to the DomU's do not freeze. No log messages in any log files that I can see, on either Dom0 or the DomU's ... apart from the Dom0 httpd logs. After a minute or so, the problem clears by itself. This is 100% reproducible. What we've tried: Downloading, building and installing the latest BNX2 driver on Dom0 Turning off MSI on the NIC - adding "options bnx2 disable_msi=1" to /etc/modprobe.conf Turning off tcp segmentation offload - "ethtool -K eth0 tso off". Sacrificing a black rooster at midnight. I've exhausted all my options apart from switching to KVM ... or slaughtering more roosters. Any suggestions?

    Read the article

  • XCP Project Kronos syslog error: "irq ... : nobody cared" on Dom0 host

    - by Vlad Fedin
    One of our production clusters driven by XCP suddenly went uresponsive. After restart and some investigation we found such logs in dom0 machine syslog: Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659040] irq 339: nobody cared (try booting with the "irqpoll" option) Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659058] Pid: 0, comm: swapper/3 Tainted: G C O 3.2.0-24-generic #37-Ubuntu Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659060] Call Trace: Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659062] <IRQ> [<ffffffff810db37d>] __report_bad_irq+0x3d/0xe0 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659071] [<ffffffff810db605>] note_interrupt+0x135/0x190 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659074] [<ffffffff810d8e69>] handle_irq_event_percpu+0xa9/0x220 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659078] [<ffffffff8130ff3b>] ? radix_tree_lookup+0xb/0x10 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659081] [<ffffffff810d9031>] handle_irq_event+0x51/0x80 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659084] [<ffffffff810dc187>] handle_edge_irq+0x87/0x140 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659089] [<ffffffff813a8829>] __xen_evtchn_do_upcall+0x199/0x250 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659092] [<ffffffff813aa96f>] xen_evtchn_do_upcall+0x2f/0x50 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659096] [<ffffffff81666d3e>] xen_do_hypervisor_callback+0x1e/0x30 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659097] <EOI> [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659104] [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659107] [<ffffffff8100a1d0>] ? xen_safe_halt+0x10/0x20 Oct 26 20:32:03 hetzner-2-mrx kernel: [1797931.659110] [<fff IRQ 339 in cat /proc/interrupts: 339: ... xen-pirq-msi-x eth0 where eth0 is hardware NIC. While host machine seems to hang, guest machines continue to work, so our tiny internal monitoring on one of the virtual hosts logged something like that: [2012-10-26 20:31:51] [OK......] 200 OK : 113159149 ns [2012-10-26 20:32:40] [DISASTER] 500 Can't connect to [hostname]:80 (No route to host) : 47763284432 ns ... [2012-10-26 20:34:40] [DISASTER] 500 Can't connect to [hostname]:80 (No route to host) : 46894835070 ns [2012-10-26 20:34:57] [DISASTER] 500 Can't connect to [hostname]:80 (Bad hostname) : 16821741955 ns ... [2012-10-26 20:38:18] [DISASTER] 500 Can't connect to [hostname]:80 (Bad hostname) : 20103298289 ns [2012-10-26 20:38:37] [DISASTER] 500 Can't connect to [hostname]:80 (Bad hostname) : 17895754943 ns Host and guest OS: Ubuntu 12.04 LTS, 05:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection Subsystem: ASUSTeK Computer Inc. Device 8369 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+ Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 17 Region 0: Memory at fe500000 (32-bit, non-prefetchable) [size=128K] Region 2: I/O ports at e000 [size=32] Region 3: Memory at fe520000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: e1000e Kernel modules: e1000e Any hints how to debug this?

    Read the article

  • LdapErr: DSID-0C0903AA, data 52e: authenticating against AD '08 with pam_ldap

    - by Stefan M
    I have full admin access to the AD '08 server I'm trying to authenticate towards. The error code means invalid credentials, but I wish this was as simple as me typing in the wrong password. First of all, I have a working Apache mod_ldap configuration against the same domain. AuthType basic AuthName "MYDOMAIN" AuthBasicProvider ldap AuthLDAPUrl "ldap://10.220.100.10/OU=Companies,MYCOMPANY,DC=southit,DC=inet?sAMAccountName?sub?(objectClass=user)" AuthLDAPBindDN svc_webaccess_auth AuthLDAPBindPassword mySvcWebAccessPassword Require ldap-group CN=Service_WebAccess,OU=Groups,OU=MYCOMPANY,DC=southit,DC=inet I'm showing this because it works without the use of any Kerberos, as so many other guides out there recommend for system authentication to AD. Now I want to translate this into pam_ldap.conf for use with OpenSSH. The /etc/pam.d/common-auth part is simple. auth sufficient pam_ldap.so debug This line is processed before any other. I believe the real issue is configuring pam_ldap.conf. host 10.220.100.10 base OU=Companies,MYCOMPANY,DC=southit,DC=inet ldap_version 3 binddn svc_webaccess_auth bindpw mySvcWebAccessPassword scope sub timelimit 30 pam_filter objectclass=User nss_map_attribute uid sAMAccountName pam_login_attribute sAMAccountName pam_password ad Now I've been monitoring ldap traffic on the AD host using wireshark. I've captured a successful session from Apache's mod_ldap and compared it to a failed session from pam_ldap. The first bindrequest is a success using the svc_webaccess_auth account, the searchrequest is a success and returns a result of 1. The last bindrequest using my user is a failure and returns the above error code. Everything looks identical except for this one line in the filter for the searchrequest, here showing mod_ldap. Filter: (&(objectClass=user)(sAMAccountName=ivasta)) The second one is pam_ldap. Filter: (&(&(objectclass=User)(objectclass=User))(sAMAccountName=ivasta)) My user is named ivasta. However, the searchrequest does not return failure, it does return 1 result. I've also tried this with ldapsearch on the cli. It's the bindrequest that follows the searchrequest that fails with the above error code 52e. Here is the failure message of the final bindrequest. resultcode: invalidcredentials (49) 80090308: LdapErr: DSID-0C0903AA, comment: AcceptSecurityContext error, data 52e, v1772 This should mean invalid password but I've tried with other users and with very simple passwords. Does anyone recognize this from their own struggles with pam_ldap and AD? Edit: Worth noting is that I've also tried pam_password crypt, and pam_filter sAMAccountName=User because this worked when using ldapsearch. ldapsearch -LLL -h 10.220.100.10 -x -b "ou=Users,ou=mycompany,dc=southit,dc=inet" -v -s sub -D svc_webaccess_auth -W '(sAMAccountName=ivasta)' This works using the svc_webaccess_auth account password. This account has scan access to that OU for use with apache's mod_ldap.

    Read the article

  • Windows7 issue in mutli- tasking and memory

    - by Nitesh
    I seeming some problem in my windows OS recently, let me first say my system configuration. processor - Intel(R) Core(TM)2 Quad CPU Q8400 @ 2.66 GHz Installed memory (RAM) - 4.00 GB (3.00 GB usable) System type - 32 bit operating system I am using two OS in this system, first one is Windows7 and the other is centOS. Well, I am using this from a long time there was no problem , and all of a sudden since from couple weeks I am facing problems in my Windows7 OS. In windows7 i was nearing using multiple jobs almost every time i log in, there was no problem but now i don't no what happen I am not able to do multiple jobs at same time. For example- 1 I am now not able to listen to music in windows media player and view photo's. All of a sudden the system stops working and does not respond and then respond after 5mins and the music get played where it got stopped after 5 mins. 2 When i start browersing internet it hangs all of sudden and doesn't respond for 2 or 3 mins and gets loading. I mean it just happens for every operation i do in the system. Even now typing was also difficult, it gets hanged very frequently even though i am doing single task. I have never come across this kind of problem before. So the first thing i did was to see the useage of the processor and the memory. Well, i thick the useage of the processor was fine, for single task the useage was some where around 3 to 5%. Well, it was something weird i found in the memory, in spite of no task that i was running it was using somewhere around 34 to 41% of memory. So i opened the task manager and click on resource monitor in performance tab. And in the memory section of the monitoring tool i found the usage of my RAM, it was something like this. Hardware reserved - 1029 MB In Use - 1430 MB Modified - 49 MB Standby - 1566 MB free - 22 MB And i could also see Available 1588 MB Cached 1615 MB Total 3067 MB Installed 4096 MB well, this if all i could find out and i have no idea why my computer is acting so weird all of a sudden and the performance problem is growing day by day and i also don't know if there is problem in Bios, i have let it for default settings from long time. please help me and Thank you in advance for reading this and helping me.

    Read the article

  • Is it possible to pass a structure of delegates from managed to native?

    - by Veiva
    I am writing a wrapper for the game programming library "Allegro" and its less stable 4.9 branch. Now, I have done good insofar, except for when it comes to wrapping a structure of function pointers. Basically, I can't change the original code, despite having access to it, because that would require me to fork it in some manner. I need to know how I can somehow pass a structure of delegates from managed to native without causing an AccessViolationException that has occurred so far. Now, for the code. Here is the Allegro definition of the structure: typedef struct ALLEGRO_FILE_INTERFACE { AL_METHOD(ALLEGRO_FILE*, fi_fopen, (const char *path, const char *mode)); AL_METHOD(void, fi_fclose, (ALLEGRO_FILE *handle)); AL_METHOD(size_t, fi_fread, (ALLEGRO_FILE *f, void *ptr, size_t size)); AL_METHOD(size_t, fi_fwrite, (ALLEGRO_FILE *f, const void *ptr, size_t size)); AL_METHOD(bool, fi_fflush, (ALLEGRO_FILE *f)); AL_METHOD(int64_t, fi_ftell, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_fseek, (ALLEGRO_FILE *f, int64_t offset, int whence)); AL_METHOD(bool, fi_feof, (ALLEGRO_FILE *f)); AL_METHOD(bool, fi_ferror, (ALLEGRO_FILE *f)); AL_METHOD(int, fi_fungetc, (ALLEGRO_FILE *f, int c)); AL_METHOD(off_t, fi_fsize, (ALLEGRO_FILE *f)); } ALLEGRO_FILE_INTERFACE; My simple attempt at wrapping it: public delegate IntPtr AllegroInternalOpenFileDelegate(string path, string mode); public delegate void AllegroInternalCloseFileDelegate(IntPtr file); public delegate int AllegroInternalReadFileDelegate(IntPtr file, IntPtr data, int size); public delegate int AllegroInternalWriteFileDelegate(IntPtr file, IntPtr data, int size); public delegate bool AllegroInternalFlushFileDelegate(IntPtr file); public delegate long AllegroInternalTellFileDelegate(IntPtr file); public delegate bool AllegroInternalSeekFileDelegate(IntPtr file, long offset, int where); public delegate bool AllegroInternalIsEndOfFileDelegate(IntPtr file); public delegate bool AllegroInternalIsErrorFileDelegate(IntPtr file); public delegate int AllegroInternalUngetCharFileDelegate(IntPtr file, int c); public delegate long AllegroInternalFileSizeDelegate(IntPtr file); [StructLayout(LayoutKind.Sequential, Pack = 0)] public struct AllegroInternalFileInterface { [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalOpenFileDelegate fi_fopen; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalCloseFileDelegate fi_fclose; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalReadFileDelegate fi_fread; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalWriteFileDelegate fi_fwrite; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFlushFileDelegate fi_fflush; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalTellFileDelegate fi_ftell; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalSeekFileDelegate fi_fseek; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsEndOfFileDelegate fi_feof; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalIsErrorFileDelegate fi_ferror; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalUngetCharFileDelegate fi_fungetc; [MarshalAs(UnmanagedType.FunctionPtr)] public AllegroInternalFileSizeDelegate fi_fsize; } I have a simple auxiliary wrapper that turns an ALLEGRO_FILE_INTERFACE into an ALLEGRO_FILE, like so: #define ALLEGRO_NO_MAGIC_MAIN #include <allegro5/allegro5.h> #include <stdlib.h> #include <string.h> #include <assert.h> __declspec(dllexport) ALLEGRO_FILE * al_aux_create_file(ALLEGRO_FILE_INTERFACE * fi) { ALLEGRO_FILE * file; assert(fi && "`fi' null"); file = (ALLEGRO_FILE *)malloc(sizeof(ALLEGRO_FILE)); if (!file) return NULL; file->vtable = (ALLEGRO_FILE_INTERFACE *)malloc(sizeof(ALLEGRO_FILE_INTERFACE)); if (!(file->vtable)) { free(file); return NULL; } memcpy(file->vtable, fi, sizeof(ALLEGRO_FILE_INTERFACE)); return file; } __declspec(dllexport) void al_aux_destroy_file(ALLEGRO_FILE * f) { assert(f && "`f' null"); assert(f->vtable && "`f->vtable' null"); free(f->vtable); free(f); } Lastly, I have a class that accepts a Stream and provides the proper methods to interact with the stream. Just to make sure, here it is: /// <summary> /// A semi-opaque data type that allows one to load fonts, etc from a stream. /// </summary> public class AllegroFile : AllegroResource, IDisposable { AllegroInternalFileInterface fileInterface; Stream fileStream; /// <summary> /// Gets the file interface. /// </summary> internal AllegroInternalFileInterface FileInterface { get { return fileInterface; } } /// <summary> /// Constructs an Allegro file from the stream provided. /// </summary> /// <param name="stream">The stream to use.</param> public AllegroFile(Stream stream) { fileStream = stream; fileInterface = new AllegroInternalFileInterface(); fileInterface.fi_fopen = Open; fileInterface.fi_fclose = Close; fileInterface.fi_fread = Read; fileInterface.fi_fwrite = Write; fileInterface.fi_fflush = Flush; fileInterface.fi_ftell = GetPosition; fileInterface.fi_fseek = Seek; fileInterface.fi_feof = GetIsEndOfFile; fileInterface.fi_ferror = GetIsError; fileInterface.fi_fungetc = UngetCharacter; fileInterface.fi_fsize = GetLength; Resource = AllegroFunctions.al_aux_create_file(ref fileInterface); if (!IsValid) throw new AllegroException("Unable to create file"); } /// <summary> /// Disposes of all resources. /// </summary> ~AllegroFile() { Dispose(); } /// <summary> /// Disposes of all resources used. /// </summary> public void Dispose() { if (IsValid) { Resource = IntPtr.Zero; // Should call AllegroFunctions.al_aux_destroy_file fileStream.Dispose(); } } IntPtr Open(string path, string mode) { return IntPtr.Zero; } void Close(IntPtr file) { fileStream.Close(); } int Read(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; int read = fileStream.Read(d, 0, size); Marshal.Copy(d, 0, data, size); return read; } int Write(IntPtr file, IntPtr data, int size) { byte[] d = new byte[size]; Marshal.Copy(data, d, 0, size); fileStream.Write(d, 0, size); return size; } bool Flush(IntPtr file) { fileStream.Flush(); return true; } long GetPosition(IntPtr file) { return fileStream.Position; } bool Seek(IntPtr file, long offset, int whence) { SeekOrigin origin = SeekOrigin.Begin; if (whence == 1) origin = SeekOrigin.Current; else if (whence == 2) origin = SeekOrigin.End; fileStream.Seek(offset, origin); return true; } bool GetIsEndOfFile(IntPtr file) { return fileStream.Position == fileStream.Length; } bool GetIsError(IntPtr file) { return false; } int UngetCharacter(IntPtr file, int character) { return -1; } long GetLength(IntPtr file) { return fileStream.Length; } } Now, when I do something like this: AllegroFile file = new AllegroFile(new FileStream("Test.bmp", FileMode.Create, FileAccess.ReadWrite)); bitmap.SaveToFile(file, ".bmp"); ...I get an AccessViolationException. I think I understand why (the garbage collector can relocate structs and classes whenever), but I'd think that the method stub that is created by the framework would take this into consideration and route the calls to the valid classes. However, it seems obviously so that I'm wrong. So basically, is there any way I can successfully wrap that structure? (And I'm sorry for all the code! Hope it's not too much...)

    Read the article

  • change password code error

    - by ejah85
    I've created a code to change a password. Now it seem contain an error. When I fill in the form to change password, and click save the error message: Warning: mysql_real_escape_string() expects parameter 2 to be resource, null given in C:\Program Files\xampp\htdocs\e-Complaint(FYP)\userChangePass.php on line 103 Warning: mysql_real_escape_string() expects parameter 2 to be resource, null given in C:\Program Files\xampp\htdocs\e-Complaint(FYP)\userChangePass.php on line 103 I really don’t know what the error message means. Please guys. Help me fix it. Here's is the code: <?php session_start(); ?> <?php # change password.php //set the page title and include the html header. $page_title = 'Change Your Password'; //include('templates/header.inc'); if(isset($_POST['submit'])){//handle the form require_once('connectioncomplaint.php');//connect to the db. //include "connectioncomplaint.php"; //create a function for escaping the data. function escape_data($data){ global $dbc;//need the connection. if(ini_get('magic_quotes_gpc')){ $data=stripslashes($data); } return mysql_real_escape_string($data, $dbc); }//end function $message=NULL;//create the empty new variable. //check for a username if(empty($_POST['userid'])){ $u=FALSE; $message .='<p> You forgot enter your userid!</p>'; }else{ $u=escape_data($_POST['userid']); } //check for existing password if(empty($_POST['password'])){ $p=FALSE; $message .='<p>You forgot to enter your existing password!</p>'; }else{ $p=escape_data($_POST['password']); } //check for a password and match againts the comfirmed password. if(empty($_POST['password1'])) { $np=FALSE; $message .='<p> you forgot to enter your new password!</p>'; }else{ if($_POST['password1'] == $_POST['password2']){ $np=escape_data($_POST['password1']); }else{ $np=FALSE; $message .='<p> your new password did not match the confirmed new password!</p>'; } } if($u && $p && $np){//if everything's ok. $query="SELECT userid FROM access WHERE (userid='$u' AND password=PASSWORD('$p'))"; $result=@mysql_query($query); $num=mysql_num_rows($result); if($num == 1){ $row=mysql_fetch_array($result, MYSQL_NUM); //make the query $query="UPDATE access SET password=PASSWORD('$np') WHERE userid=$row[0]"; $result=@mysql_query($query);//run the query. if(mysql_affected_rows() == 1) {//if it run ok. //send an email,if desired. echo '<p><b>your password has been changed.</b></p>'; include('templates/footer.inc');//include the HTML footer. exit();//quit the script. }else{//if it did not run OK. $message= '<p>Your password could not be change due to a system error.We apolpgize for any inconvenience.</p><p>' .mysql_error() .'</p>'; } }else{ $message= '<p> Your username and password do not match our records.</p>'; } mysql_close();//close the database connection. }else{ $message .='<p>Please try again.</p>'; } }//end oh=f the submit conditional. //print the error message if there is one. if(isset($message)){ echo'<font color="red">' , $message, '</font>'; } ?> <form action="<?php echo $_SERVER['PHP_SELF']; ?>" method="post"> <body> <script language="JavaScript1.2">mmLoadMenus();</script> <table width="604" height="599" border="0" align="center" cellpadding="0" cellspacing="0"> <tr> <td height="130" colspan="7"><img src="images/banner(E-Complaint)-.jpg" width="759" height="130" /></td> </tr> <tr> <td width="100" height="30" bgcolor="#ABD519"></td> <td width="100" bgcolor="#ABD519"></td> <td width="100" bgcolor="#ABD519"></td> <td width="100" bgcolor="#ABD519"></td> <td width="100" bgcolor="#ABD519"></td> <td width="160" bgcolor="#ABD519"> <?php include "header.php"; ?>&nbsp;</td> </tr> <tr> <td colspan="7" bgcolor="#FFFFFF"> <fieldset><legend> Enter your information in the form below:</legend> <p><b>User ID:</b> <input type="text" name="username" size="10" maxlength="20" value="<?php if(isset($_POST['userid'])) echo $_POST['userid']; ?>" /></p> <p><b>Current Password:</b> <input type="password" name="password" size="20" maxlength="20" /></p> <p><b>New Password:</b> <input type="password" name="password1" size="20" maxlength="20" /></p> <p><b>Confirm New Password:</b> <input type="password" name="password2" size="20" maxlength="20" /></p> </fieldset> <div align="center"> <input type="submit" name="submit" value="Change My Password" /></div> </form><!--End Form--> </td> </tr> </table> </body> </html>

    Read the article

  • JBoss naming service port conflict

    - by Kramer
    I am having trouble getting JBoss started. I am running JBoss 5.1.0 on Mac OSX (yes, I know it is an old version, but that’s what the application is certified on for now). I am using Apple’s JVM 1.6.0_37. I get the following error when trying to use JBoss (there are some more exceptions, but these are the first few): Error installing to Start: name=jboss:service=Naming state=Create mode=Manual requiredState=Installed java.rmi.server.ExportException: Port already in use: 1098; nested exception is: java.net.BindException: Can't assign requested address at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:310) at sun.rmi.transport.tcp.TCPTransport.exportObject(TCPTransport.java:218) Caused by: java.net.BindException: Can't assign requested address at java.net.PlainSocketImpl.socketBind(Native Method) at java.net.PlainSocketImpl.bind(PlainSocketImpl.java:383) 16:57:15,596 ERROR [AbstractKernelController] Error installing to Real: name=vfsfile:/Users/home/server/jboss-5.1.0.GA/server/myserver/conf/jboss-service.xml state=PreReal mode=Manual requiredState=Real org.jboss.deployers.spi.DeploymentException: Error deploying: jboss:service=Naming at org.jboss.deployers.spi.DeploymentException.rethrowAsDeploymentException(DeploymentException.java:49) at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:118) at org.jboss.system.deployers.ServiceDeployer.deploy(ServiceDeployer.java:46) Caused by: java.rmi.server.ExportException: Port already in use: 1098; nested exception is: java.net.BindException: Can't assign requested address at sun.rmi.transport.tcp.TCPTransport.listen(TCPTransport.java:310) Caused by: java.net.BindException: Can't assign requested address at java.net.PlainSocketImpl.socketBind(Native Method) Now I know what you are thinking, that I am running something that conflicts with that port, but I have used lsof and there is nothing listed on that port. I have tried changing the port in conf/bindingservice.beans/META-INF/bindings-jboss-beans.xml: <bean class="org.jboss.services.binding.ServiceBindingMetadata"> <property name="serviceName">jboss:service=Naming</property> <property name="bindingName">RmiPort</property> <property name="port">5098</property> <property name="description">Socket Naming service uses to receive RMI requests from client proxies</property> </bean> Unfortunately, I then get the name errors with the new port number. I also installed a network monitoring tool on my box and it doesn't look like any ports are being opened when I start jboss, but it is possible, that the tool might be missing a port that is opened and then closed quickly. Any ideas what could be the problem or how to fix it?

    Read the article

  • Lots of dropped packages when tcpdumping on busy interface

    - by Frands Hansen
    My challenge I need to do tcpdumping of a lot of data - actually from 2 interfaces left in promiscuous mode that are able to see a lot of traffic. To sum it up Log all traffic in promiscuous mode from 2 interfaces Those interfaces are not assigned an IP address pcap files must be rotated per ~1G When 10 TB of files are stored, start truncating the oldest What I currently do Right now I use tcpdump like this: tcpdump -n -C 1000 -z /data/compress.sh -i any -w /data/livedump/capture.pcap $FILTER The $FILTER contains src/dst filters so that I can use -i any. The reason for this is, that I have two interfaces and I would like to run the dump in a single thread rather than two. compress.sh takes care of assigning tar to another CPU core, compress the data, give it a reasonable filename and move it to an archive location. I cannot specify two interfaces, thus I have chosen to use filters and dump from any interface. Right now, I do not do any housekeeping, but I plan on monitoring disk and when I have 100G left I will start wiping the oldest files - this should be fine. And now; my problem I see dropped packets. This is from a dump that has been running for a few hours and collected roughly 250 gigs of pcap files: 430083369 packets captured 430115470 packets received by filter 32057 packets dropped by kernel <-- This is my concern How can I avoid so many packets being dropped? These things I did already try or look at Changed the value of /proc/sys/net/core/rmem_max and /proc/sys/net/core/rmem_default which did indeed help - actually it took care of just around half of the dropped packets. I have also looked at gulp - the problem with gulp is, that it does not support multiple interfaces in one process and it gets angry if the interface does not have an IP address. Unfortunately, that is a deal breaker in my case. Next problem is, that when the traffic flows though a pipe, I cannot get the automatic rotation going. Getting one huge 10 TB file is not very efficient and I don't have a machine with 10TB+ RAM that I can run wireshark on, so that's out. Do you have any suggestions? Maybe even a better way of doing my traffic dump altogether.

    Read the article

  • Problems installing Memcache (PECL extension)

    - by Petrus
    I have installed memcached fine, and now I will need to install PECL extension memcache. Im running RedHat x86_64 es5. The installation gives me this: downloading memcache-2.2.6.tgz ... Starting to download memcache-2.2.6.tgz (35,957 bytes) ..........done: 35,957 bytes 11 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 Enable memcache session handler support? [yes] : Notice: Use of undefined constant STDIN - assumed 'STDIN' in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in PEAR/Frontend/CLI.php on line 304 Warning: fgets() expects parameter 1 to be resource, string given in /usr/lib/php/PEAR/Frontend/CLI.php on line 304 building in /root/tmp/pear-build-root/memcache-2.2.6 running: /root/tmp/pear/memcache/configure --enable-memcache-session=yes checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcache support... yes, shared checking whether to enable memcache session handler support... yes checking for the location of ZLIB... no checking for the location of zlib... /usr checking for session includes... /usr/include/php checking for memcache session support... enabled checking for ld used by cc... /usr/bin/ld checking if the linker (/usr/bin/ld) is GNU ld... yes checking for /usr/bin/ld option to reload object files... -r checking for BSD-compatible nm... /usr/bin/nm -B checking whether ln -s works... yes checking how to recognize dependent libraries... pass_all checking for ANSI C header files... yes checking for sys/types.h... yes checking for sys/stat.h... yes checking for stdlib.h... yes checking for string.h... yes checking for memory.h... yes checking for strings.h... yes checking for inttypes.h... yes checking for stdint.h... yes checking for unistd.h... yes checking dlfcn.h usability... yes checking dlfcn.h presence... yes checking for dlfcn.h... yes checking the maximum length of command line arguments... 98304 checking command to parse /usr/bin/nm -B output from cc object... ok checking for objdir... .libs checking for ar... ar checking for ranlib... ranlib checking for strip... strip checking if cc supports -fno-rtti -fno-exceptions... no checking for cc option to produce PIC... -fPIC checking if cc PIC flag -fPIC works... yes checking if cc static flag -static works... yes checking if cc supports -c -o file.o... yes checking whether the cc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes checking whether -lc should be explicitly linked in... no checking dynamic linker characteristics... GNU/Linux ld.so checking how to hardcode library paths into programs... immediate checking whether stripping libraries is possible... yes checking if libtool supports shared libraries... yes checking whether to build shared libraries... yes checking whether to build static libraries... no creating libtool appending configuration tag "CXX" to libtool configure: creating ./config.status config.status: creating config.h running: make /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -o memcache.lo mkdir .libs cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache.c -fPIC -DPIC -o .libs/memcache.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -o memcache_queue.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_queue.c -fPIC -DPIC -o .libs/memcache_queue.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -o memcache_standard_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_standard_hash.c -fPIC -DPIC -o .libs/memcache_standard_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -o memcache_consistent_hash.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_consistent_hash.c -fPIC -DPIC -o .libs/memcache_consistent_hash.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=compile cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -o memcache_session.lo cc -I/usr/include/php -I. -I/root/tmp/pear/memcache -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -c /root/tmp/pear/memcache/memcache_session.c -fPIC -DPIC -o .libs/memcache_session.o /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=link cc -DPHP_ATOM_INC -I/root/tmp/pear-build-root/memcache-2.2.6/include -I/root/tmp/pear-build-root/memcache-2.2.6/main -I/root/tmp/pear/memcache -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib -DHAVE_CONFIG_H -g -O2 -o memcache.la -export-dynamic -avoid-version -prefer-pic -module -rpath /root/tmp/pear-build-root/memcache-2.2.6/modules memcache.lo memcache_queue.lo memcache_standard_hash.lo memcache_consistent_hash.lo memcache_session.lo cc -shared .libs/memcache.o .libs/memcache_queue.o .libs/memcache_standard_hash.o .libs/memcache_consistent_hash.o .libs/memcache_session.o -Wl,-soname -Wl,memcache.so -o .libs/memcache.so creating memcache.la (cd .libs && rm -f memcache.la && ln -s ../memcache.la memcache.la) /bin/sh /root/tmp/pear-build-root/memcache-2.2.6/libtool --mode=install cp ./memcache.la /root/tmp/pear-build-root/memcache-2.2.6/modules cp ./.libs/memcache.so /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.so cp ./.libs/memcache.lai /root/tmp/pear-build-root/memcache-2.2.6/modules/memcache.la PATH="$PATH:/sbin" ldconfig -n /root/tmp/pear-build-root/memcache-2.2.6/modules ---------------------------------------------------------------------- Libraries have been installed in: /root/tmp/pear-build-root/memcache-2.2.6/modules If you ever happen to want to link against installed libraries in a given directory, LIBDIR, you must either use libtool, and specify the full pathname of the library, or use the `-LLIBDIR' flag during linking and do at least one of the following: - add LIBDIR to the `LD_LIBRARY_PATH' environment variable during execution - add LIBDIR to the `LD_RUN_PATH' environment variable during linking - use the `-Wl,--rpath -Wl,LIBDIR' linker flag - have your system administrator add LIBDIR to `/etc/ld.so.conf' See any operating system documentation about shared libraries for more information, such as the ld(1) and ld.so(8) manual pages. ---------------------------------------------------------------------- Build complete. Don't forget to run 'make test'. running: make INSTALL_ROOT="/root/tmp/pear-build-root/install-memcache-2.2.6" install Installing shared extensions: /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/ running: find "/root/tmp/pear-build-root/install-memcache-2.2.6" | xargs ls -dils 361232 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6 361263 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr 361264 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib 361265 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php 361266 4 drwxr-xr-x 3 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions 361267 4 drwxr-xr-x 2 root root 4096 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626 361262 236 -rwxr-xr-x 1 root root 235575 Jan 28 10:47 /root/tmp/pear-build-root/install-memcache-2.2.6/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so Build process completed successfully Installing '/usr/lib/php/extensions/no-debug-non-zts-20090626/memcache.so' install ok: channel://pecl.php.net/memcache-2.2.6 Extension memcache enabled in php.ini The memcache.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 I tried as well to install this extension "memcached 1.0.2 (PHP extension for interfacing with memcached via libmemcached library)" but it failed: downloading memcached-1.0.2.tgz ... Starting to download memcached-1.0.2.tgz (22,724 bytes) ........done: 22,724 bytes 4 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /root/tmp/pear-build-root/memcached-1.0.2 running: /root/tmp/pear/memcached/configure checking for egrep... grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking for C compiler default output file name... a.out checking whether the C compiler works... yes checking whether we are cross compiling... no checking for suffix of executables... checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether cc accepts -g... yes checking for cc option to accept ANSI C... none needed checking how to run the C preprocessor... cc -E checking for icc... no checking for suncc... no checking whether cc understands -c and -o together... yes checking for system library directory... lib checking if compiler supports -R... no checking if compiler supports -Wl,-rpath,... yes checking build system type... x86_64-unknown-linux-gnu checking host system type... x86_64-unknown-linux-gnu checking target system type... x86_64-unknown-linux-gnu checking for PHP prefix... /usr checking for PHP includes... -I/usr/include/php -I/usr/include/php/main -I/usr/include/php/TSRM -I/usr/include/php/Zend -I/usr/include/php/ext -I/usr/include/php/ext/date/lib checking for PHP extension directory... /usr/lib/php/extensions/no-debug-non-zts-20090626 checking for PHP installed headers prefix... /usr/include/php checking if debug is enabled... no checking if zts is enabled... no checking for re2c... re2c checking for re2c version... invalid configure: WARNING: You will need re2c 0.13.4 or later if you want to regenerate PHP parsers. checking for gawk... gawk checking whether to enable memcached support... yes, shared checking for libmemcached... yes, shared checking whether to enable memcached session handler support... yes checking whether to enable memcached igbinary serializer support... no checking for ZLIB... yes, shared checking for zlib location... /usr checking for session includes... /usr/include/php checking for memcached session support... enabled checking for memcached igbinary support... disabled checking for libmemcached location... configure: error: memcached support requires libmemcached. Use --with-libmemcached-dir= to specify the prefix where libmemcached headers and library are located ERROR: `/root/tmp/pear/memcached/configure' failed The memcached.so object is not in /usr/local/lib/php/extensions/no-debug-non-zts-20090626 Is there a kind soul out there that can solve this puzzle?

    Read the article

  • Improved appointment rendering in RadScheduler for ASP.NET AJAX, Q1 2010

    Now that Q1 2010 release is out in the wild, we can sit down and discuss some of the changes we decided to make in the new release. One of them is the new appointment rendering of RadScheduler - a potentially breaking change, but a much needed one. If you have problems with your old custom skins, include the old base stylesheet along with your RadScheduler and set EnableEmbeddedBaseStylesheet=false in your RadScheduler. You can find the said base stylesheet attached to this post.   While trying to improve the performance of RadScheduler, I noticed that the number of resources slows down the rendering and overall performance considerably. This had to be expected - the images to support the appointment rounded corners (and the predefined resources) were quite large. However, I didnt take into account that all browsers keep for performance reasons their images uncompressed in memory and with the color depth of the current desktop. A simple calculation later I discovered that the appointment sprite itself is taking 25MB memory when loaded. Add 5 resources to the fray and you have 150MB memory down with a single blow. As it turns out - a sprite image is not a panacea, if it gets too big - dont be afraid to break it in two. The loading time may suffer, but your browser suffers more while rendering a 25MB monster. First I thought of undertaking the aforementioned solution - breaking the appointment sprite in two and thus reducing the two appointment sprites to mere 2MB uncompressed. Then I thought - the rounded corners are small - I can use borders and backgrounds to simulate rounded appointment borders while still keeping the same HTML structure. The gradients can be done with a single 10x50px image plus we have a gain - border colors and backgrounds can be changed on the fly.  I started with five rendering elements at first, then tried with four and finally I settled on only three elements.  Behold the new appointment rendering (quite simple really):       On the left you can see that the first container has only top and bottom borders and a background. In fact, the background isnt even needed since it will be obscured by the elements on top of it. The whole first container is only needed for the four dots that reside in the four corners of the appointment. On top of this container is another one that holds the left and right borders and slightly lighter background to create the illusion of a second lighter border beside the other two. At last on top of all others is placed the text container that also holds the top and bottom borders and the gradient background. On the right you can see the final result - Im quite happy with it and I hope you will be too. After creating the new rendering we took another step further - we decided to use alpha gradients for the resource rendering, thus supporting any color appointments with rounded corners and gradients. You can see some examples below:We plan on adding BorderColor and BackColor properties  to the ResourceStyles definitions for Q1 SP1. However with the new rendering in Q1 2010 we do support BackColor and BorderColor appointment properties - you only need to set AppointmentStyleMode=Default to keep RadScheduler from switching to Simple appointment rendering. Here is one screenshot of RadScheduler with appointments set to different colors: I hope that you will enjoy working with the new appointments in RadScheduler. RadScheduler base stylesheet Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >