Search Results

Search found 6772 results on 271 pages for 'rob effect'.

Page 260/271 | < Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >

  • Running an allocation simulation repeatedly breaks after the first run.

    - by Az
    Background I have a bunch of students, their desired projects and the supervisors for the respective projects. I'm running a battery of simulations to see which projects the students end up with, which will allow me to get some useful statistics required for feedback. So, this is essentially a Monte-Carlo simulation where I'm randomising the list of students and then iterating through it, allocating projects until I hit the end of the list. Then the process is repeated again. Note that, within a single session, after each successful allocation of a project the following take place: + the project is set to allocated and cannot be given to another student + the supervisor has a fixed quota of students he can supervise. This is decremented by 1 + Once the quota hits 0, all the projects from that supervisor become blocked and this has the same effect as a project being allocated Code def resetData(): for student in students.itervalues(): student.allocated_project = None for supervisor in supervisors.itervalues(): supervisor.quota = 0 for project in projects.itervalues(): project.allocated = False project.blocked = False The role of resetData() is to "reset" certain bits of the data. For example, when a project is successfully allocated, project.allocated for that project is flipped to True. While that's useful for a single run, for the next run I need to be deallocated. Above I'm iterating through thee three dictionaries - one each for students, projects and supervisors - where the information is stored. The next bit is the "Monte-Carlo" simulation for the allocation algorithm. sesh_id = 1 for trial in range(50): for id in randomiseStudents(1): stud_id = id student = students[id] if not student.preferences: # Ignoring the students who've not entered any preferences for rank in ranks: temp_proj = random.choice(list(student.preferences[rank])) if not (temp_proj.allocated or temp_proj.blocked): alloc_proj = student.allocated_proj_ref = temp_proj.proj_id alloc_proj_rank = student.allocated_rank = rank successActions(temp_proj) temp_alloc = Allocated(sesh_id, stud_id, alloc_proj, alloc_proj_rank) print temp_alloc # Explained break sesh_id += 1 resetData() # Refer to def resetData() above All randomiseStudents(1) does is randomise the order of students. Allocated is a class defined as such: class Allocated(object): def __init__(self, sesh_id, stud_id, alloc_proj, alloc_proj_rank): self.sesh_id = sesh_id self.stud_id = stud_id self.alloc_proj = alloc_proj self.alloc_proj_rank = alloc_proj_rank def __repr__(self): return str(self) def __str__(self): return "%s - Student: %s (Project: %s - Rank: %s)" %(self.sesh_id, self.stud_id, self.alloc_proj, self.alloc_proj_rank) Output and problem Now if I run this I get an output such as this (truncated): 1 - Student: 7720 (Project: 1100241 - Rank: 1) 1 - Student: 7832 (Project: 1100339 - Rank: 1) 1 - Student: 7743 (Project: 1100359 - Rank: 1) 1 - Student: 7820 (Project: 1100261 - Rank: 2) 1 - Student: 7829 (Project: 1100270 - Rank: 1) . . . 1 - Student: 7822 (Project: 1100280 - Rank: 1) 1 - Student: 7792 (Project: 1100141 - Rank: 7) 2 - Student: 7739 (Project: 1100267 - Rank: 1) 3 - Student: 7806 (Project: 1100272 - Rank: 1) . . . 45 - Student: 7806 (Project: 1100272 - Rank: 1) 46 - Student: 7714 (Project: 1100317 - Rank: 1) 47 - Student: 7930 (Project: 1100343 - Rank: 1) 48 - Student: 7757 (Project: 1100358 - Rank: 1) 49 - Student: 7759 (Project: 1100269 - Rank: 1) 50 - Student: 7778 (Project: 1100301 - Rank: 1) Basically, it works perfectly for the first run, but on subsequent runs leading upto the nth run, in this case 50, only a single student-project allocation pair is returned. Thus, the main issue I'm having trouble with is figuring out what is causing this anomalous behaviour especially since the first run works smoothly. Thanks in advance, Az

    Read the article

  • How do I add a namespace attribute to an element in JAXB when marshalling?

    - by Ryan Elkins
    I'm working with eBay's LMS (Large Merchant Services) and kept running into the error: org.xml.sax.SAXException: SimpleDeserializer encountered a child element, which is NOT expected, in something it was trying to deserialize. After alot of trial and error I traced the problem down. It turns out this works: <?xml version="1.0" encoding="UTF-8"?> <BulkDataExchangeRequests xmlns="urn:ebay:apis:eBLBaseComponents"> <Header> <Version>583</Version> <SiteID>0</SiteID> </Header> <AddFixedPriceItemRequest xmlns="urn:ebay:apis:eBLBaseComponents"> while this (what I've been sending) doesn't: <?xml version="1.0" encoding="UTF-8"?> <BulkDataExchangeRequests xmlns="urn:ebay:apis:eBLBaseComponents"> <Header> <Version>583</Version> <SiteID>0</SiteID> </Header> <AddFixedPriceItemRequest> The difference is the xml namespace attribute on the AddFixedPriceItemRequest . All of my XML is currently being marshalled via JAXB and I'm not sure what is the best way to go about adding a second xmlns attribute to a different element in my file. So that's the question. How do I add an xmlns attribute to another element in JAXB? UPDATE: package ebay.apis.eblbasecomponents; import javax.xml.bind.annotation.XmlAccessType; import javax.xml.bind.annotation.XmlAccessorType; import javax.xml.bind.annotation.XmlElement; import javax.xml.bind.annotation.XmlType; @XmlAccessorType(XmlAccessType.FIELD) @XmlType(name = "AddFixedPriceItemRequestType", propOrder = { "item" }) public class AddFixedPriceItemRequestType extends AbstractRequestType { @XmlElement(name = "Item") protected ItemType item; public ItemType getItem() { return item; } public void setItem(ItemType value) { this.item = value; } } Added class definition by request. UPDATE 2: Edited the above class like so to no effect: @XmlAccessorType(XmlAccessType.FIELD) @XmlType(namespace = "urn:ebay:apis:eBLBaseComponents", name = "AddFixedPriceItemRequestType", propOrder = { "item" }) public class AddFixedPriceItemRequestType UPDATE 3: Here is a snippet of the BulkDataExchangeRequestsType class. I tried throwing a namespace="urn:ebay:apis:eBLBaseComponents" into the @XmlElement for AddFixedPriceItemRequest but it didn't do anything. @XmlAccessorType(XmlAccessType.FIELD) @XmlType(name = "BulkDataExchangeRequestsType", propOrder = { "header", "addFixedPriceItemRequest" }) public class BulkDataExchangeRequestsType { @XmlElement(name = "Header") protected MerchantDataRequestHeaderType header; @XmlElement(name = "AddFixedPriceItemRequest") protected List<AddFixedPriceItemRequestType> addFixedPriceItemRequest; UPDATE 4: Here's the hideous chunk of code that is updating the xml after marshalling for me. This is currently working although I'm not particulary proud of it. DocumentBuilderFactory dbf = DocumentBuilderFactory.newInstance(); dbf.setNamespaceAware(true); DocumentBuilder db = dbf.newDocumentBuilder(); Document doc = db.newDocument(); marshaller.marshal(request, doc); NodeList nodes = doc.getChildNodes(); nodes = nodes.item(0).getChildNodes(); for(int i = 0; i < nodes.getLength(); i++){ Node node = nodes.item(i); if (!node.getNodeName().equals("Header")){ ((Element)node).setAttribute("xmlns", "urn:ebay:apis:eBLBaseComponents"); } } Update 5: For anyone else that runs into this problem with eBay and wonders why - The reasoning behind this most likely has to do with how eBay is handling these requests. The BulkDataExchange probably takes the XML payload, breaks it up, and send the pieces out to the Merchant or Trading API. The inner pieces of the payload then do not have the namespace and the get the error. This is a guess on my part but I wouldn't be surprised if this is what was going on behind the scenes. Thanks for all the help everyone.

    Read the article

  • Linq to SQL NullReferenceException's: A random needle in a haystack!

    - by Shane
    I'm getting NullReferenceExeceptions at seemly random times in my application and can't track down what could be causing the error. I'll do my best to describe the scenario and setup. Any and all suggestions greatly appreciated! C# .net 3.5 Forms Application, but I use the WebFormRouting library built by Phil Haack (http://haacked.com/archive/2008/03/11/using-routing-with-webforms.aspx) to leverage the Routing libraries of .net (usually used in conjunction with MVC) - intead of using url rewriting for my urls. My database has 60 tables. All Normalized. It's just a massive application. (SQL server 2008) All queries are built with Linq to SQL in code (no SP's). Each time a new instance of my data context is created. I use only one data context with all relationships defined in 4 relationship diagrams in SQL Server. the data context gets created a lot. I let the closing of the data context be handled automatically. I've heard arguments both sides about whether you should leave to be closed automatically or do it yourself. In this case I do it myself. It doesnt seem to matter if I'm creating a lot of instances of the data context or just one. For example, I've got a vote-up button. with the following code, and it errors probably 1 in 10-20 times. protected void VoteUpLinkButton_Click(object sender, EventArgs e) { DatabaseDataContext db = new DatabaseDataContext(); StoryVote storyVote = new StoryVote(); storyVote.StoryId = storyId; storyVote.UserId = Utility.GetUserId(Context); storyVote.IPAddress = Utility.GetUserIPAddress(); storyVote.CreatedDate = DateTime.Now; storyVote.IsDeleted = false; db.StoryVotes.InsertOnSubmit(storyVote); db.SubmitChanges(); // If this story is not yet published, check to see if we should publish it. Make sure that // it is already approved. if (story.PublishedDate == null && story.ApprovedDate != null) { Utility.MakeUpcommingNewsPopular(storyId); } // Refresh our page. Response.Redirect("/news/" + category.UniqueName + "/" + RouteData.Values["year"].ToString() + "/" + RouteData.Values["month"].ToString() + "/" + RouteData.Values["day"].ToString() + "/" + RouteData.Values["uniquename"].ToString()); } The last thing I tried was the "Auto Close" flag setting on SQL Server. This was set to true and I changed to false. Doesnt seem to have done the trick although has had a good overall effect. Here's a detailed that wasnt caught. I also get slighly different errors when caught by my try/catch's. System.Web.HttpUnhandledException: Exception of type 'System.Web.HttpUnhandledException' was thrown. --- System.NullReferenceException: Object reference not set to an instance of an object. at System.Web.Util.StringUtil.GetStringHashCode(String s) at System.Web.UI.ClientScriptManager.EnsureEventValidationFieldLoaded() at System.Web.UI.ClientScriptManager.ValidateEvent(String uniqueId, String argument) at System.Web.UI.WebControls.TextBox.LoadPostData(String postDataKey, NameValueCollection postCollection) at System.Web.UI.Page.ProcessPostData(NameValueCollection postData, Boolean fBeforeLoad) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) --- End of inner exception stack trace --- at System.Web.UI.Page.HandleError(Exception e) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) at System.Web.UI.Page.ProcessRequest() at System.Web.UI.Page.ProcessRequest(HttpContext context) at ASP.forms_news_detail_aspx.ProcessRequest(HttpContext context) at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) HELP!!!

    Read the article

  • Dynamically sized UIWebView in a UITableViewCell with auto layout - constraint violation

    - by Orion Edwards
    I've got a UITableViewCell which contains a UIWebView. The table view cell adjusts it's height depending on the web view contents. I've got it all working fine, however when the view loads, I get a constraint violation exception in the debugger (the app continues running and functionally works fine, but I'd like to resolve this exception if possible). How I've got it set up: The TableView sets the cell height like this: -(CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath { if(indexPath.section == 0) { [_topCell layoutIfNeeded]; CGFloat finalHeight = [_topCell.contentView systemLayoutSizeFittingSize:UILayoutFittingCompressedSize].height; return finalHeight + 1; } The cell constraints are as follows: Arbitrary 7px offset from the cell's contentView (top) to the webView Web view has arbitrary fixed height constraint of 62px (will expand later once content loads) Arbitrary 8px offset from the webView to the cell's contentView (bottom) in my viewDidLoad, I tell the webView to go and load a URL, and in the webViewDidFinishLoad, I update the web view height constraint, like this -(void)webViewDidFinishLoad:(UIWebView *)webView { CGSize fittingSize = [webView sizeThatFits:CGSizeZero]; // fittingSize is approx 500 [self.tableView beginUpdates]; // Exceptions happen on the following line setting the constant _topCell.webViewHeightConstraint.constant = fittingSize.height; [_topCell layoutSubviews]; [self.tableView endUpdates]; } The exception looks like this: Unable to simultaneously satisfy constraints. Probably at least one of the constraints in the following list is one you don't want. Try this: (1) look at each constraint and try to figure out which you don't expect; (2) find the code that added the unwanted constraint or constraints and fix it. (Note: If you're seeing NSAutoresizingMaskLayoutConstraints that you don't understand, refer to the documentation for the UIView property translatesAutoresizingMaskIntoConstraints) ( "<NSLayoutConstraint:0x10964b250 V:[webView(62)] (Names: webView:0x109664a00 )>", "<NSLayoutConstraint:0x109243d30 V:|-(7)-[webView] (Names: webView:0x109664a00, cellContent:0x1092436f0, '|':cellContent:0x1092436f0 )>", "<NSLayoutConstraint:0x109243f80 V:[webView]-(8)-| (Names: cellContent:0x1092436f0, webView:0x109664a00, '|':cellContent:0x1092436f0 )>", "<NSAutoresizingMaskLayoutConstraint:0x10967c210 h=--& v=--& V:[cellContent(78)] (Names: cellContent:0x1092436f0 )>" ) Will attempt to recover by breaking constraint <NSLayoutConstraint:0x10964b250 V:[webView(62)] (Names: webView:0x109664a00 )> This seems a bit weird. It's implied that the constraint which sets the height of the web view is going to be broken, however the web view does get it's height correctly set, and the tableview renders perfectly well. From my guesses, it looks like the newly increased web view height constraint (it's about 500px after the web view loads) is going to conflict with the <NSAutoresizingMaskLayoutConstraint:0x10967c210 h=--& v=--& V:[cellContent(78)] setting the cell height to 78 (put there by interface builder). This makes sense, however I don't want that cell content to have a fixed height of 78px, I want it to increase it's height, and functionally, it actually does this, just with these exceptions. I've tried setting _topCell.contentView.translatesAutoresizingMaskIntoConstraints = NO; to attempt to remove the NSAutoresizingMaskLayoutConstraint - this stops the exceptions, but then all the other layout is screwed up and the web view is about 10px high in the middle of the table view for no reason. I've also tried setting _topCell.contentView.autoresizingMask |= UIViewAutoresizingFlexibleHeight; in the viewDidLoad to hopefully affect the contentView 78px height constraint, but this has no effect Any help would be much appreciated

    Read the article

  • Pyramind of DIVs

    - by sebastian
    Hi there, I'm trying to build a pyramid that's made of 4 DIVs. The layout looks like this: ------ | #1 | ------ ---------------- | #2 | #3 | #4 | ---------------- Moreover I need 3 additional DIVs starting at the center DIV (#3) and containing either #1, #2 or #3 additionally. These DIVs are used the build a sliding effect with jQueryUI later on. It's supposed to look like #1, #2 and #4 slide out of #3. The margin between the DIVs is supposed to be 2 pixels. I also want the whole block to be centered. Even with display: inline; and position: absolute; enabled on the visible and invisible DIVs I can't get the layout right. I used some negative margins and when it looked ok for the first time I saw that my top DIV was positioned outside of the html body. I suppose there is a more simple and elegant way to achieve what I want. Thanks in advance Sebastian Here's what I've got so far: HTML: <div id="centerbox"> <div id="main">main</div> <div id="rail_top"> <div id="top">top</div> </div> <div id="rail_left"> <div id="left">left</div> </div> <div id="rail_right"> <div id="right">right</div> </div> </div> CSS: #centerbox { height: 602px; width: 904px; margin-top: 640px; margin-left: auto; margin-right: auto; } /* blue */ #main { background-color: #33F; height: 300px; width: 300px; margin: 2px; z-index: 9999; position: absolute; display: inline; margin-left: 302px; } /* green */ #top { background-color: #3F0; height: 300px; width: 300px; z-index: 1; position: absolute; display: inline; } /* pink */ #left { background-color: #F06; height: 300px; width: 300px; z-index: 1; } /* orange */ #right { background-color: #FC0; height: 300px; width: 300px; z-index: 1; margin-left: 302px; } #rail_top { height: 602px; width: 300px; display: inline; position: absolute; margin-top: -300px; margin-left: 302px; } #rail_left { height: 300px; width: 602px; float: left; position: absolute; display: inline; margin-top: 2px; } #rail_right { height: 300px; width: 602px; float: right; position: absolute; display: inline; margin-left: 302px; margin-top: 2px; }

    Read the article

  • Inherited variables are not reading correctly when using bitwise comparisons

    - by Shawn B
    Hey, I have a few classes set up for a game, with XMapObject as the base, and XEntity, XEnviron, and XItem inheriting it. MapObjects have a number of flags, one of them being MAPOBJECT_SOLID. My problem is that XEntity is the only class that correctly detects MAPOBJECT_SOLID. Both Items are Environs are always considered solid by the game, regardless of the flag's state. What is important is that Environs and Item should almost never be solid. Here are the relevent code samples: XMapObject: class XMapObject : public XObject { public: Uint8 MapObjectType,Location[2],MapObjectFlags; XMapObject *NextMapObject,*PrevMapObject; XMapObject(); void CreateMapObject(Uint8 MapObjectType); void SpawnMapObject(Uint8 MapObjectLocation[2]); void RemoveMapObject(); void DeleteMapObject(); void MapObjectSetLocation(Uint8 Y,Uint8 X); void MapObjectMapLink(); void MapObjectMapUnlink(); }; XEntity: class XEntity : public XMapObject { public: Uint8 Health,EntityFlags; float Speed,Time; XEntity *NextEntity,*PrevEntity; XItem *IventoryList; XEntity(); void CreateEntity(Uint8 EntityType,Uint8 EntityLocation[2]); void DeleteEntity(); void EntityLink(); void EntityUnlink(); Uint8 MoveEntity(Uint8 YOffset,Uint8 XOffset); }; XEnviron: class XEnviron : public XMapObject { public: Uint8 Effect,TimeOut; void CreateEnviron(Uint8 Type,Uint8 Y,Uint8 X,Uint8 TimeOut); }; XItem: class XItem : public XMapObject { public: void CreateItem(Uint8 Type,Uint8 Y,Uint8 X); }; And lastly, the entity move code. Only entities are capable of moving themselves. Uint8 XEntity::MoveEntity(Uint8 YOffset,Uint8 XOffset) { Uint8 NewY = Location[0] + YOffset, NewX = Location[1] + XOffset; if((NewY >= 0 && NewY < MAPY) && (NewX >= 0 && NewX < MAPX)) { XTile *Tile = GetTile(NewY,NewX); if(Tile->MapList != NULL) { XMapObject *MapObject = Tile->MapList; while(MapObject != NULL) { if(MapObject->MapObjectFlags & MAPOBJECT_SOLID) { printf("solid\n"); return 0; } MapObject = MapObject->NextMapObject; } } if(Tile->Flags & TILE_SOLID && EntityFlags & ENTITY_CLIPPING) { return 0; } this->MapObjectSetLocation(NewY,NewX); return 1; } return 0; } What is wierd, is that the bitwise operator always returns true when the MapObject is an Environ or an Item, but it works correctly for Entities. For debug I am using the printf "Solid", and also a printf containing the value of the flag for both Environs and Items. Any help is greatly appreciated, as this is a major bug for the small game I am working on.

    Read the article

  • How can I reset addAttributeToFilter in Magento searches

    - by Bobby
    I'm having problems getting the addAttributeToFilter function within a loop to behave in Magento. I have test data in my store to support searches for all of the following data; $attributeSelections=array( array('size' => 44, 'color' => 67, 'manufacturer' => 17), array('size' => 43, 'color' => 69, 'manufacturer' => 17), array('size' => 42, 'color' => 70, 'manufacturer' => 17)); And my code to search through these combinations; foreach ($attributeSelections as $selection) { $searcher = Mage::getSingleton('catalogsearch/advanced')->getProductCollection(); foreach ($selection as $k => $v) { $searcher->addAttributeToFilter("$k", array('eq' => "$v")); echo "$k: $v<br />"; } $result=$searcher->getData(); print_r($result); } This loop gives the following results (slightly sanitised for veiwing pleasure); size: 44 color: 67 manufacturer: 17 Array ( [0] => Array ( [entity_id] => 2965 [entity_type_id] => 4 [attribute_set_id] => 28 [type_id] => simple [sku] => 1006-0001 [size] => 44 [color] => 67 [manufacturer] => 17 ) ) size: 43 color: 69 manufacturer: 17 Array ( [0] => Array ( [entity_id] => 2965 [entity_type_id] => 4 [attribute_set_id] => 28 [type_id] => simple [sku] => 1006-0001 [size] => 44 [color] => 67 [manufacturer] => 17 ) ) size: 42 color: 70 manufacturer: 17 Array ( [0] => Array ( [entity_id] => 2965 [entity_type_id] => 4 [attribute_set_id] => 28 [type_id] => simple [sku] => 1006-0001 [size] => 44 [color] => 67 [manufacturer] => 17 ) ) So my loop is function and generating the search. However, the values fed into addAttributeToFilter on the first itteration of the loop seem to remain stored for each search. I've tried clearing my search object, for example, unset($searcher) and unset($result). I've also tried magento functions such as getNewEmptyItem(), resetData(), distinct() and clear() but none have the desired effect. Basically what I am trying to do is check for duplicate products before my script attempts to programatically create a product with these attribute combinations. The array of attribute selections may be of varying sizes hence the need for a loop. I would be very appreiciative if anyone might be able to shed some light on my problem.

    Read the article

  • How do I imply code contracts of chained methods to avoid superfluous checks while chaining?

    - by Sandor Drieënhuizen
    I'm using Code Contracts in C# 4.0. I'm applying the usual static method chaining to simulate optional parameters (I know C# 4.0 supports optional parameters but I really don't want to use them). The thing is that my contract requirements are executed twice (or possibly the number of chained overloads I'd implement) if I call the Init(string , string[]) method -- an obvious effect from the sample source code below. This can be expensive, especially due to relatively expensive requirements like the File.Exists I use. public static void Init(string configurationPath, string[] mappingAssemblies) { // The static contract checker 'makes' me put these here as well as // in the overload below. Contract.Requires<ArgumentNullException>(configurationPath != null, "configurationPath"); Contract.Requires<ArgumentException>(configurationPath.Length > 0, "configurationPath is an empty string."); Contract.Requires<FileNotFoundException>(File.Exists(configurationPath), configurationPath); Contract.Requires<ArgumentNullException>(mappingAssemblies != null, "mappingAssemblies"); Contract.ForAll<string>(mappingAssemblies, (n) => File.Exists(n)); Init(configurationPath, mappingAssemblies, null); } public static void Init(string configurationPath, string[] mappingAssemblies, string optionalArgument) { // This is the main implementation of Init and all calls to chained // overloads end up here. Contract.Requires<ArgumentNullException>(configurationPath != null, "configurationPath"); Contract.Requires<ArgumentException>(configurationPath.Length > 0, "configurationPath is an empty string."); Contract.Requires<FileNotFoundException>(File.Exists(configurationPath), configurationPath); Contract.Requires<ArgumentNullException>(mappingAssemblies != null, "mappingAssemblies"); Contract.ForAll<string>(mappingAssemblies, (n) => File.Exists(n)); //... } If however, I remove the requirements from that method, the static checker complains that the requirements of the Init(string, string[], string) overload are not met. I reckon that the static checker doesn't understand that there requirements of the Init(string, string[], string) overload implicitly apply to the Init(string, string[]) method as well; something that would be perfectly deductable from the code IMO. This is the situation I would like to achieve: public static void Init(string configurationPath, string[] mappingAssemblies) { // I don't want to repeat the requirements here because they will always // be checked in the overload called here. Init(configurationPath, mappingAssemblies, null); } public static void Init(string configurationPath, string[] mappingAssemblies, string optionalArgument) { // This is the main implementation of Init and all calls to chained // overloads end up here. Contract.Requires<ArgumentNullException>(configurationPath != null, "configurationPath"); Contract.Requires<ArgumentException>(configurationPath.Length > 0, "configurationPath is an empty string."); Contract.Requires<FileNotFoundException>(File.Exists(configurationPath), configurationPath); Contract.Requires<ArgumentNullException>(mappingAssemblies != null, "mappingAssemblies"); Contract.ForAll<string>(mappingAssemblies, (n) => File.Exists(n)); //... } So, my question is this: is there a way to have the requirements of Init(string, string[], string) implicitly apply to Init(string, string[]) automatically?

    Read the article

  • Disable antialiasing for a specific GDI device context

    - by Jacob Stanley
    I'm using a third party library to render an image to a GDI DC and I need to ensure that any text is rendered without any smoothing/antialiasing so that I can convert the image to a predefined palette with indexed colors. The third party library i'm using for rendering doesn't support this and just renders text as per the current windows settings for font rendering. They've also said that it's unlikely they'll add the ability to switch anti-aliasing off any time soon. The best work around I've found so far is to call the third party library in this way (error handling and prior settings checks ommitted for brevity): private static void SetFontSmoothing(bool enabled) { int pv = 0; SystemParametersInfo(Spi.SetFontSmoothing, enabled ? 1 : 0, ref pv, Spif.None); } // snip Graphics graphics = Graphics.FromImage(bitmap) IntPtr deviceContext = graphics.GetHdc(); SetFontSmoothing(false); thirdPartyComponent.Render(deviceContext); SetFontSmoothing(true); This obviously has a horrible effect on the operating system, other applications flicker from cleartype enabled to disabled and back every time I render the image. So the question is, does anyone know how I can alter the font rendering settings for a specific DC? Even if I could just make the changes process or thread specific instead of affecting the whole operating system, that would be a big step forward! (That would give me the option of farming this rendering out to a separate process- the results are written to disk after rendering anyway) EDIT: I'd like to add that I don't mind if the solution is more complex than just a few API calls. I'd even be happy with a solution that involved hooking system dlls if it was only about a days work. EDIT: Background Information The third-party library renders using a palette of about 70 colors. After the image (which is actually a map tile) is rendered to the DC, I convert each pixel from it's 32-bit color back to it's palette index and store the result as an 8bpp greyscale image. This is uploaded to the video card as a texture. During rendering, I re-apply the palette (also stored as a texture) with a pixel shader executing on the video card. This allows me to switch and fade between different palettes instantaneously instead of needing to regenerate all the required tiles. It takes between 10-60 seconds to generate and upload all the tiles for a typical view of the world. EDIT: Renamed GraphicsDevice to Graphics The class GraphicsDevice in the previous version of this question is actually System.Drawing.Graphics. I had renamed it (using GraphicsDevice = ...) because the code in question is in the namespace MyCompany.Graphics and the compiler wasn't able resolve it properly. EDIT: Success! I even managed to port the PatchIat function below to C# with the help of Marshal.GetFunctionPointerForDelegate. The .NET interop team really did a fantastic job! I'm now using the following syntax, where Patch is an extension method on System.Diagnostics.ProcessModule: module.Patch( "Gdi32.dll", "CreateFontIndirectA", (CreateFontIndirectA original) => font => { font->lfQuality = NONANTIALIASED_QUALITY; return original(font); }); private unsafe delegate IntPtr CreateFontIndirectA(LOGFONTA* lplf); private const int NONANTIALIASED_QUALITY = 3; [StructLayout(LayoutKind.Sequential)] private struct LOGFONTA { public int lfHeight; public int lfWidth; public int lfEscapement; public int lfOrientation; public int lfWeight; public byte lfItalic; public byte lfUnderline; public byte lfStrikeOut; public byte lfCharSet; public byte lfOutPrecision; public byte lfClipPrecision; public byte lfQuality; public byte lfPitchAndFamily; public unsafe fixed sbyte lfFaceName [32]; }

    Read the article

  • WebSphere Application Server EJB Optimization

    - by Chris Aldrich
    We are working on developing a Java EE based application. Our application is Java 1.5 compatible and will be deployed to WAS ND 6.1.0.21 with EBJ 3.0 and Web Services feature packs. The configuration is currently one cell with two clusters. Each cluster will have two nodes. Our application, or our system, as I should rather say, comes in two or three parts. Part 1: An ear deployed to one cluster that contains 3rd party vendor code combined with customization code. Their code is EJB 2.0 compliant and has a lot of Remote Home interfaces. Part 2: An ear deployed to the same cluster as the first ear. This ear contains EBJ 3's that make calls into the EJB 2's supplied by the vendor and the custom code. These EJB 3's are used by the JSF UI also packaged with the EAR, and some of them are also exposed as web services (JAX-WS 2.0 with SOAP 1.2 compliance) for other clients. Part 3: There may be other services that do not depend on our vendor/custom code app. These services will be EJB 3.0's and web services that are deployed to the other cluster. Per a recommendation from some IBM staff on site here, communication between nodes in a cluster can be EJB RMI. But if we are going across clusters and/or other cells, then the communication should be web services. That said, some of us are wondering about performance and optimizing communication for speed of our applications that will use our web services and EJB's. Right now most EJB's are exposed as remote. (and our vendor set theirs up that way, rather than also exposing local home interfaces). We are wondering if WAS does any optimizations between apps in the same node/cluster node space. If two apps are installed in the same area and they call each other via remote home interface, is WAS smart enough to make it a local home interface call? Are their other optimization techniques? Should we consider them? Should we not? What are the costs/benefits? Here is the question from one of our team members as sent in their email: The question is: Supposing we develop our EJBs as remote EJBs, where our UI controller code is talking to our EXT java services via EJB3...what are our options for performance optimization when both the EJB server and client are running in the same container? As one point of reference, google has given me some oooooold websphere performance tuning documentation from 2000 that explains a tuning configuration you can set to enable Call By Reference for EJB communication when they're in the same application server JVM. It states the following: Because EJBs are inherently location independent, they use a remote programming model. Method parameters and return values are serialized over RMI-IIOP and returned by value. This is the intrinsic RMI "Call By Value" model. WebSphere provides the "No Local Copies" performance optimization for running EJBs and clients (typically servlets) in the same application server JVM. The "No Local Copies" option uses "Call By Reference" and does not create local proxies for called objects when both the client and the remote object are in the same process. Depending on your workload, this can result in a significant overhead savings. Configure "No Local Copies" by adding the following two command line parameters to the application server JVM: * -Djavax.rmi.CORBA.UtilClass=com.ibm.CORBA.iiop.Util * -Dcom.ibm.CORBA.iiop.noLocalCopies=true CAUTION: The "No Local Copies" configuration option improves performance by changing "Call By Value" to "Call By Reference" for clients and EJBs in the same JVM. One side effect of this is that the Java object derived (non-primitive) method parameters can actually be changed by the called enterprise bean. Consider Figure 16a: Also, we will also be using Process Server 6.2 and WESB 6.2 as well in the future. Any ideas? recommendations? Thanks

    Read the article

  • highlight navigation PHP

    - by Kira
    I've launched a website a while back and successfully used Javascript + CSS to highlight the current page on the navigation. However, it is not working in Safari and it does not validate well, when using Javascript, so I decided to have PHP assign the CSS id to the HTML elements. So far, it works fine, compared to the other times where there was two of each link displayed, when it was attempted in PHP. My problem is that all links look normal and the CSS property is not applied. I have a feeling that it has to do with my PHP code, but I'm not certain. The site address is here As for the PHP code, here it is: <?php echo('<li><span class="bold">Main</span>'); echo('<ul>'); if ($page=="home") { echo('<li><a id="current" href="index.shtml">Home</a></li>'); } else { echo('<li><a href="index.shtml">Home</a></li>'); } if ($page=="faq") { echo('<li><a id="current" href="faq.shtml">FAQ</a></li>'); } else { echo('<li><a href="faq.shtml">FAQ</a></li>'); } if ($page=="about") { echo('<li><a id="current" href="about.shtml">About Bryce</a></li>'); } else { echo('<li><a href="about.shtml">About Bryce</a></li>'); } echo('<li><a href="contact.php">Contact Bryce</a></li>'); if ($page=="sign guestbook") { echo('<li><a id="current" href="sign.shtml">Sign Guestbook</a></li>'); } else { echo('<li><a href="sign.shtml">Sign Guestbook</a></li>'); } if ($page=="view guestbook") { echo('<li><a id="current" href="view.shtml">View Guestbook</a></li>'); } else { echo('<li><a href="view.shtml">View Guestbook</a></li>'); } echo('</ul>'); echo('</li>'); echo('<li><span class="bold">Info</span>'); echo('<ul>'); if ($page=="projects") { echo('<li><a id="current" href="projects.shtml">Projects</a></li>'); } else { echo('<li><a href="projects.shtml">Projects</a></li>'); } if ($page=="books") { echo('<li><a id="current" href="books.shtml">Books</a></li>'); } else { echo('<li><a href="books.shtml">Books</a></li>'); } echo('</ul>'); echo('</li>'); echo('<li><span class="bold">Misc.</span>'); echo('<ul>'); if ($page=="cover designs") { echo('<li><a id="current" href="coverdesigns.shtml">Cover Designs</a></li>'); } else { echo('<li><a href="coverdesigns.shtml">Cover Designs</a></li>'); } echo('<li><a target="_blank" href="http://www.lulu.com/brycecampbellsbooks">Lulu Store</a></li>'); echo('<li><a href="rss/">RSS</a></li>'); echo('</ul>'); echo('</li>'); ?> In order to give you guys an idea of what the highlighting effect should look like, here is the CSS that is supposed to be applied to the current page: #current { font-style: italic; text-decoration: none; color: #000000; } When looking up what I was doing wrong, it told me that I was implementing it right, but it does not seem that the PHP is getting the values.

    Read the article

  • How to sanely configure security policy in Tomcat 6

    - by Chas Emerick
    I'm using Tomcat 6.0.24, as packaged for Ubuntu Karmic. The default security policy of Ubuntu's Tomcat package is pretty stringent, but appears straightforward. In /var/lib/tomcat6/conf/policy.d, there are a variety of files that establish default policy. Worth noting at the start: I've not changed the stock tomcat install at all -- no new jars into its common lib directory(ies), no server.xml changes, etc. Putting the .war file in the webapps directory is the only deployment action. the web application I'm deploying fails with thousands of access denials under this default policy (as reported to the log thanks to the -Djava.security.debug="access,stack,failure" system property). turning off the security manager entirely results in no errors whatsoever, and proper app functionality What I'd like to do is add an application-specific security policy file to the policy.d directory, which seems to be the recommended practice. I added this to policy.d/100myapp.policy (as a starting point -- I would like to eventually trim back the granted permissions to only what the app actually needs): grant codeBase "file:${catalina.base}/webapps/ROOT.war" { permission java.security.AllPermission; }; grant codeBase "file:${catalina.base}/webapps/ROOT/-" { permission java.security.AllPermission; }; grant codeBase "file:${catalina.base}/webapps/ROOT/WEB-INF/-" { permission java.security.AllPermission; }; grant codeBase "file:${catalina.base}/webapps/ROOT/WEB-INF/lib/-" { permission java.security.AllPermission; }; grant codeBase "file:${catalina.base}/webapps/ROOT/WEB-INF/classes/-" { permission java.security.AllPermission; }; Note the thrashing around attempting to find the right codeBase declaration. I think that's likely my fundamental problem. Anyway, the above (really only the first two grants appear to have any effect) almost works: the thousands of access denials are gone, and I'm left with just one. Relevant stack trace: java.security.AccessControlException: access denied (java.io.FilePermission /var/lib/tomcat6/webapps/ROOT/WEB-INF/classes/com/foo/some-file-here.txt read) java.security.AccessControlContext.checkPermission(AccessControlContext.java:323) java.security.AccessController.checkPermission(AccessController.java:546) java.lang.SecurityManager.checkPermission(SecurityManager.java:532) java.lang.SecurityManager.checkRead(SecurityManager.java:871) java.io.File.exists(File.java:731) org.apache.naming.resources.FileDirContext.file(FileDirContext.java:785) org.apache.naming.resources.FileDirContext.lookup(FileDirContext.java:206) org.apache.naming.resources.ProxyDirContext.lookup(ProxyDirContext.java:299) org.apache.catalina.loader.WebappClassLoader.findResourceInternal(WebappClassLoader.java:1937) org.apache.catalina.loader.WebappClassLoader.findResource(WebappClassLoader.java:973) org.apache.catalina.loader.WebappClassLoader.getResource(WebappClassLoader.java:1108) java.lang.ClassLoader.getResource(ClassLoader.java:973) I'm pretty convinced that the actual file that's triggering the denial is irrelevant -- it's just some properties file that we check for optional configuration parameters. What's interesting is that: it doesn't exist in this context the fact that the file doesn't exist ends up throwing a security exception, rather than java.io.File.exists() simply returning false (although I suppose that's just a matter of the semantics of the read permission). Another workaround (besides just disabling the security manager in tomcat) is to add an open-ended permission to my policy file: grant { permission java.security.AllPermission; }; I presume this is functionally equivalent to turning off the security manager. I suppose I must be getting the codeBase declaration in my grants subtly wrong, but I'm not seeing it at the moment.

    Read the article

  • Temporary "Backup" of SharePoint Content During Feature and Solution Deployment

    - by ccomet
    I need to decide on a method for storing a subset of the content in a SharePoint site, so that when I delete and recreate certain lists as part of a feature activation, I can re-insert all of this content back where it should belong. I have an idea myself, but I don't know if it's the only method and more importantly, the right method. My client has me creating a SharePoint system for them to communicate with their clients. The business process has maybe 5 stages in it (maybe it's more, I don't even know because they don't tell me everything), and the current system I've written over the past months is maybe 2 stages through. This meets our deadline of completing those systems by Monday next week... but at that point my client is planning on making the site live from that point. In effect, their work with their clients will be running parallel with my work for them. As I complete my own work on a separate test server, I'll push each following stage of the process onto the live server. Scheduled downtimes during non-business times (like a weekend) will be available for me to perform these pushes. Keeping pace so that my development is faster than the actual business process is my own problem and off-topic... so let's get back to the problem I stated at the start of this post. In this system, we have sets of features which will create lists for their associated content types and field types when activated, and delete these lists when the feature is deactivated. Most updates don't need to deactivate and reactivate these features, such as workflow changes, custom actions, custom forms, and similar ilk. But there are some parts which do require this. On my test server, it's okay for me to obliterate lists, but once the site is live and there's real correspondence data, it's absolutely unacceptable to do this. So when I need to implement a new change in functionality, I need to be able to store the currently present data in several lists, deactivate the feature, reactivate the feature, and restore all of this data. Perhaps I have hoist myself by my own petard with the feature system I implemented. Unfortunately, the necessity to later on make several of these "project sites" meant I had to do a lot of my code with the concept of "Can be deployed repeatedly" in mind. My current plan is to run through lists and libraries which will be affected by the particular feature that is to be reset. Files and all of their versions will be saved in a directory on the server. Then, a set of text files will be used to store all of the important field values for the items. This includes a lot of cross-list reference lookups that will need to be maintained, but that's simple enough. Then, I deactivate the feature, deploy the new solution, and reactivate the feature. We upload all of the files in the order specified by their versions and update them with the stored fields for those versions, so that we retain the version structure. As each one is first uploaded, the new ID is picked out, and all relevant lookups in the rest of the files are updated (in some manner that I make sure I don't re-update it later with an incorrect value, of course). After that, we run through all the rest of the items in the order most conducive to keeping the relational data correct. This roughly summarizes what my current plan is. To my advantage, there are no long running workflows in the system that will be affected by this, so there's nothing I will have to worry about making sure nothing is "still running" when I do this stuff. I don't really know all the cons of this approach... I can imagine they're quite hefty. But I'm unsure what other choices I even have, and my searches haven't turned up anything. Is there anyone who can think of a better idea? Or will anyone just tell me that I really have no other choice? Thanks in advance!

    Read the article

  • vsftpd not allowing uploads. 550 response.

    - by Josh
    I've set vsftpd up on a centos box. I keep trying to upload files but I keep getting "550 Failed to change directory" and "550 Could not get file size." Here's my vsftpd.conf # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=YES # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. anon_mkdir_write_enable=YES anon_other_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=NO # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES log_ftp_protocol=YES banner_file=/etc/vsftpd/issue local_root=/var/www guest_enable=YES guest_username=ftpusr ftp_username=nobody

    Read the article

  • Why are my USB 2.0 devices hanging Windows XP?

    - by BenAlabaster
    Background on the machine I'm having a problem with: The machine was inherited and appears to be circa 2003 (there's a date stamp on the power supply which leads me to this conclusion). I've got it set up as a Skype terminal for my 2 year old to keep in touch with her grandparents and other members of the family - which everyone loves. It has a DFI CM33-TL/G ATX (identified using SiSoft Sandra) motherboard hosting an Intel Celeron 1.3GHz CPU, 768Mb PC133 SDRAM, a D-LINK WDA-2320 54G Wi-Fi network card and a generic USB 2.0 expansion board based on the NEC uPD720102 chipset containing 3 external and 1 internal USB sockets. It's also hosting a 1.44Mb floppy drive on FDD0, a new 80Gb Western Digital hard drive running as master on IDE0 and a Panasonic DVD+/-RW running as master on IDE1. All this is sitting in a slimline case running off a Macron Power MPT-135 135W Flex power supply. The motherboard is running a version of Award BIOS 05/24/2002-601T-686B-6A6LID4AC-00. Could this be updated? If so, from where? I've raked through the manufacturer's website but can't find any hint of downloads for either drivers or BIOS updates. The hard disk is freshly formatted and built with Windows XP Professional/Service Pack 3 and is up to date with all current patches. In addition to Windows XP, the only other software it's running is Skype 4.1 (4.2 hangs the whole machine as soon as it starts up, requiring a hard boot to recover). It's got a Daytek MV150 15" touch screen hooked up to the on board VGA and COM1 sockets with the most current drivers from the Daytek website and the most current version of ELO-Touchsystems drivers for the touch component. The webcam is a Logitech Webcam C200 with the latest drivers from the Logitech website. The problem: If I hook any devices to the USB 2.0 sockets, it hangs the whole machine and I have to hard boot it to get it back up. If I have any devices attached to the USB 2.0 sockets when I boot up, it hangs before Windows gets to the login prompt and I have to hard boot it to recover. Workarounds found: I can plug the same devices into the on board USB 1.0 sockets and everything works fine, albeit at reduced performance. I've tried 3 different kinds of USB thumb drives, 3 different makes/models of webcams and my iPhone all with the same effect. They're recognized and don't hang the machine when I hook them to the USB 1.0 but if I hook them to the USB 2.0 ports, the machine hangs within a couple of seconds of recognizing the devices were connected. Attempted solutions: I've seen suggestions that this could be a power problem - that the PSU just doesn't have the wattage to drive these ports. While I'm doubtful this is the problem [after all the motherboard has the same standard connector regardless of the PSU wattage], I tried disabling all the on board devices that I'm not using - on board LAN, the second COM port, the AGP connector etc. through the BIOS in what I'm sure is a futile attempt to reduce the power consumption... I also modified the ACPI and power management settings. It didn't have any noticeable affect, although it didn't do any harm either. Could the wattage of the PSU really cause this problem? If it can, is there anything I need to be aware of when replacing it or do I just need to make sure it's got a higher wattage than the current one? My interpretation was that the wattage only affected the number of drives you could hook up to the power connectors, is that right? I've installed the USB card in another machine and it works without issue, so it's not a problem with the USB card itself, and Windows says the card is installed and working correctly... right up until I connect a device to it. The only thing I haven't done which I only just thought of while writing this essay is trying the USB 2.0 card in a different PCI slot, or re-ordering the wi-fi and USB cards in the slots... although I'm not sure if this will make any difference - does anyone have any experience that would suggest this might work? Other thoughts/questions: Perhaps this is an incompatibility between the USB 2.0 card and the BIOS, would re-flashing the BIOS with a newer version help? Do I need to be able to identify the manufacturer of the motherboard in order to be able to find a BIOS edition specific for this motherboard or will any version of Award BIOS function in its place? Question: Does anyone have any ideas that could help me get my USB 2.0 devices hooked up to this machine?

    Read the article

  • Slow Jquery Animation

    - by Pyronaut
    I have this webpage : http://miloarc.pyrogenicmedia.com/ Which atm is nothing special. It has a few effects but none that break the bank. If you mouse over a tile, it should change it's opacity to give it a fade effect. This is done through the Jquery Animation, not through CSS (I do this so it can fade, instead of being a straight change). Everything looks nice when the page loads, and the fades look perfect. Infact if you drag your mouse all over the place, if gives you a "trail" almost like a snake. Anyway, My next problem is that you will see there is a box in the top left, which is going to tell you information about the tile you are hovering over. This seems to work fine. When you mouse over that information box, it switches it's position (So that you can reach the tiles that were previously hidden underneath it). From my understanding, this is all working fine, and to the letter. However, After one move of the info box (One hover). Viewing the page in Firefox turns slugish. As in, after a successful move of the info box, the fade effects become very stuttered, and it doesn't pick up events as fast meaning you can't draw a "trail" on the screen. Chrome doesn't have this issue. It seems to work fine no matter what. Safari also seems ok. Although I do notice if I move my mouse really fast, it does jump a bit but not as much as firefox. Internet explorer doesn't work at all. Seems to crash the browser... And there is an error with the rounded corner plugin im using (Not sure why...). All in all, I think whatever I'm doing inside my code must be heavily sluggish. But I don't know where it is happening. Here is the full code, but I would advise go to the link to view everything. <script type="text/javascript"> $(document).ready(function() { var WindowWidth = $(window).width(); var WindowMod = WindowWidth % 20; var WindowWidth = WindowWidth - WindowMod; var BoxDimension = WindowWidth / 20; var BoxDimensionFixed = BoxDimension - 12; var dimensions = BoxDimensionFixed + 'px'; $('.gamebutton').each(function(i) { $(this).css('width', dimensions); $(this).css('height', dimensions); }); var OuterDivHeight = BoxDimension * 10; var TopMargin = ($(window).height() - OuterDivHeight) / 2; var OuterDivWidth = BoxDimension * 20; var LeftMargin = ($(window).width() - OuterDivWidth) / 2; $('#gamePort').css('margin-top', TopMargin).css('margin-left', LeftMargin).css('margin-right', LeftMargin); $('.gamebutton img').each(function(i) { $(this).hover( function () { $(this).animate({'opacity': 0.65}); }, function () { $(this).animate({'opacity': 1}); } ); }); $('.rounded').corners(); $('.gamebutton').each(function(i) { $(this).hover(function() { $('.gameTitlePopup').html($(this).attr('title')); FadeActive(); }); }); function FadeActive() { $('.activeInfo').fadeIn('slow'); } $('#gameInfoLeft').hover(function() { $(this).removeClass('activeInfo'); $(this).fadeOut('slow', function() { $('#gameInfoRight').addClass('activeInfo'); FadeActive(); }); }); $('#gameInfoRight').hover(function() { $(this).removeClass('activeInfo'); $(this).fadeOut('slow', function() { $('#gameInfoLeft').addClass('activeInfo'); FadeActive(); }); }); }); </script> Thanks for any help :).

    Read the article

  • How to resolve "HTTP/1.1 403 Forbidden" errors from iCal/CalDAV server after upgrade to Snow Leopard Server?

    - by morgant
    We recently upgraded our Open Directory Master & Replica to Mac OS X 10.6.4 Snow Leopard Server. We had a mismatched server FQDN & LDAP Search Base/Kerberos Realm, so we exported all users & groups, created the new Open Directory Master w/matching FQDN & Search Base/Realm, reimported users & groups, and re-bound all servers & workstations to the new OD Master. At the same time as all of this, we upgraded our iCal/CalDAV server to Mac OS X 10.6.4 Snow Leopard Server. Ever since doing so, we've seen the following issues with our iCal/CalDAV server and iCal clients on both Mac OS X 10.5 Leopard & Mac OS X 10.6: If a user attempts to move or delete an event (single or repeating) that was created prior to the upgrade to 10.6 Server, they get the following error: Access to "blah" in "blah" in account "blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. New users added to the directory get the following error when attempting to add their account to in iCal's preferences: The user "blah" has no configured pricipals. Confirm with your network administrator that your account has at least one CalDAV principal configured. Interestingly, we've since discovered that users seem to be able to delete individual events from an old repeating event without error, but that's a massive amount of work to get rid of a repeating event. I will note that we have not yet added an SRV record in DNS as instructed on page 19 of iCal_Server_Admin_v10.6.pdf. Further Investigation: In this particular case, a user is attempting to decline repeating events created prior to the upgrade to Snow Leopard Server. Granting the user full write access with sudo calendarserver_manage_principals --add-write-proxy users:user1 users:user2 (which did work) doesn't allow deletion of the events. Still get the usual error: Access to "blah blah" in "blah blah" in account "blah blah" is not permitted. The server responded: "HTTP/1.1 403 Forbidden" to operation CalDAVWriteEntityQueueableOperation. The error that shows up in /var/log/caldavd/error.log on the iCal Server when attempting to delete one of the events is: 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.extensions#info] PUT /calendars/__uids__/XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX/calendar/XXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX.ics HTTP/1.1 2011-03-17 15:14:30-0400 [-] [caldav-8009] [PooledMemCacheProtocol,client] [twistedcaldav.scheduling.implicit#error] Cannot change ORGANIZER: UID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX And the error in /var/log/system.log on the client is: Mar 17 15:14:30 192-168-21-169-dhcp iCal[33509]: CalDAV CalDAVWriteEntityQueueableOperation failed: status 'HTTP/1.1 403 Forbidden' request:\n\nBEGIN:VCALENDAR^M\nVERSION:2.0^M\nPRODID:-//Apple Inc.//iCal 3.0//EN^M\nCALSCALE:GREGORIAN^M\nBEGIN:VTIMEZONE^M\nTZID:US/Eastern^M\nBEGIN:DAYLIGHT^M\nTZOFFSETFROM:-0500^M\nTZOFFSETTO:-0400^M\nDTSTART:20070311T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=3;BYDAY=2SU^M\nTZNAME:EDT^M\nEND:DAYLIGHT^M\nBEGIN:STANDARD^M\nTZOFFSETFROM:-0400^M\nTZOFFSETTO:-0500^M\nDTSTART:20071104T020000^M\nRRULE:FREQ=YEARLY;BYMONTH=11;BYDAY=1SU^M\nTZNAME:EST^M\nEND:STANDARD^M\nEND:VTIMEZONE^M\nBEGIN:VEVENT^M\nSEQUENCE:5^M\nDTSTART;TZID=US/Eastern:20090117T094500^M\nDTSTAMP:20081227T143043Z^M\nSUMMARY:blah blah^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;ROLE=REQ-PARTICIPANT:urn:uuid^M\n :XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nATTENDEE;CN="First Last";CUTYPE=INDIVIDUAL;PARTSTAT=ACCEPTED:mailto:user@d^M\n omain.tld^M\nEXDATE;TZID=US/Eastern:20110319T094500^M\nDTEND;TZID=US/Eastern:20090117T183000^M\nRRULE:FREQ=WEEKLY;INTERVAL=1^M\nTRANSP:OPAQUE^M\nUID:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX^M\nORGANIZER;CN="First Last":mailto:[email protected]^M\nX-WR-ITIPSTATUSML:UNCLEAN^M\nCREATED:20110317T191348Z^M\nEND:VEVENT^M\nEND:VCALENDAR^M\n\n\n... response:\nHTTP/1.1 403 Forbidden^M\nDate: Thu, 17 Mar 2011 19:14:30 GMT^M\nDav: 1, access-control, calendar-access, calendar-schedule, calendar-auto-schedule, calendar-availability, inbox-availability, calendar-proxy, calendarserver-private-events, calendarserver-private-comments, calendarserver-principal-property-search^M\nContent-Type: text/xml^M\nContent-Length: 134^M\nServer: Twisted/8.2.0 TwistedWeb/8.2.0 TwistedCalDAV/2.5 (iCal Server v12.56.21)^M\n^M\n<?xml version='1.0' encoding='UTF-8'?><error xmlns='DAV:'>^M\n <valid-attendee-change xmlns='urn:ietf:params:xml:ns:caldav'/>^M\n</error> One thing I have noticed, and I'm not sure if this has any real effect is that in many of these pre-Snow Leopard Server migration events, the ORGANIZER is specified like the following: ORGANIZER;CN=First Last:mailto:[email protected] But newer ones are more like one of the two following: ORGANIZER;CN=First Last;[email protected];SCHEDULE-STATUS=1 ORGANIZER;CN=First Last;[email protected]:urn:uuid:XXXXXXXX-XXXX-XXXX-XXXX-XXXXXXXXXXXX iCal_Server_Admin_v10.6.pdf notes that the ".db.sqlite" files are completely disposable, they're merely a performance cache and are re-built on the fly, so are safe to delete. I did delete the one for the organizer's calendars and it took longer to process the attempted event delete while it rebuilt the database, but still errored out in the end. FWIW the error is thrown by this code: https://trac.calendarserver.org/browser/CalendarServer/trunk/twistedcaldav/scheduling/implicit.py Any further suggestions? I see lots of questions about this in my Google searches, but not solutions and this is a widespread problem on our iCal Server. Now, we mostly try to get users to ignore them (hence the amount of time this question has been open), but every now and then I dig in deeper trying to find the culprit and/or solution.

    Read the article

  • VFS: file-max limit 1231582 reached

    - by Rick Koshi
    I'm running a Linux 2.6.36 kernel, and I'm seeing some random errors. Things like ls: error while loading shared libraries: libpthread.so.0: cannot open shared object file: Error 23 Yes, my system can't consistently run an 'ls' command. :( I note several errors in my dmesg output: # dmesg | tail [2808967.543203] EXT4-fs (sda3): re-mounted. Opts: (null) [2837776.220605] xv[14450] general protection ip:7f20c20c6ac6 sp:7fff3641b368 error:0 in libpng14.so.14.4.0[7f20c20a9000+29000] [4931344.685302] EXT4-fs (md16): re-mounted. Opts: (null) [4982666.631444] VFS: file-max limit 1231582 reached [4982666.764240] VFS: file-max limit 1231582 reached [4982767.360574] VFS: file-max limit 1231582 reached [4982901.904628] VFS: file-max limit 1231582 reached [4982964.930556] VFS: file-max limit 1231582 reached [4982966.352170] VFS: file-max limit 1231582 reached [4982966.649195] top[31095]: segfault at 14 ip 00007fd6ace42700 sp 00007fff20746530 error 6 in libproc-3.2.8.so[7fd6ace3b000+e000] Obviously, the file-max errors look suspicious, being clustered together and recent. # cat /proc/sys/fs/file-max 1231582 # cat /proc/sys/fs/file-nr 1231712 0 1231582 That also looks a bit odd to me, but the thing is, there's no way I have 1.2 million files open on this system. I'm the only one using it, and it's not visible to anyone outside the local network. # lsof | wc 16046 148253 1882901 # ps -ef | wc 574 6104 44260 I saw some documentation saying: file-max & file-nr: The kernel allocates file handles dynamically, but as yet it doesn't free them again. The value in file-max denotes the maximum number of file- handles that the Linux kernel will allocate. When you get lots of error messages about running out of file handles, you might want to increase this limit. Historically, the three values in file-nr denoted the number of allocated file handles, the number of allocated but unused file handles, and the maximum number of file handles. Linux 2.6 always reports 0 as the number of free file handles -- this is not an error, it just means that the number of allocated file handles exactly matches the number of used file handles. Attempts to allocate more file descriptors than file-max are reported with printk, look for "VFS: file-max limit reached". My first reading of this is that the kernel basically has a built-in file descriptor leak, but I find that very hard to believe. It would imply that any system in active use needs to be rebooted every so often to free up the file descriptors. As I said, I can't believe this would be true, since it's normal to me to have Linux systems stay up for months (even years) at a time. On the other hand, I also can't believe that my nearly-idle system is holding over a million files open. Does anyone have any ideas, either for fixes or further diagnosis? I could, of course, just reboot the system, but I don't want this to be a recurring problem every few weeks. As a stopgap measure, I've quit Firefox, which was accounting for almost 2000 lines of lsof output (!) even though I only had one window open, and now I can run 'ls' again, but I doubt that will fix the problem for long. (edit: Oops, spoke too soon. By the time I finished typing out this question, the symptom was/is back) Thanks in advance for any help. And another update: My system was basically unusable, so I decided I had no option but to reboot. But before I did, I carefully quit one process at a time, checking /proc/sys/fs/file-nr after each termination. I found that, predictably, the number of open files gradually went down as I closed things down. Unfortunately, it wasn't a large effect. Yes, I was able to clear up 5000-10000 open files, but there were still over 1.2 million left. I shut down just about everything. All interactive shells, except for the one ssh I left open to finish closing down, httpd, even nfs service. Basically everything in the process table that wasn't a kernel process, and there were still an appalling number of files apparently left open. After the reboot, I found that /proc/sys/fs/file-nr showed about 2000 files open, which is much more reasonable. Starting up 2 Xvnc sessions as usual, along with the dozen or so monitoring windows I like to keep open, brought the total up to about 4000 files. I can see nothing wrong with that, of course, but I've obviously failed to identify the root cause. I'm still looking for ideas, since I definitely expect it to happen again. And another update, the next day: I watched the system carefully, and discovered that /proc/sys/fs/file-nr showed a growth of about 900 open files per hour. I shut down the system's only NFS client for the night, and the growth stopped. Mind you, it didn't free up the resources, but it did at least stop consuming more. Is this a known bug with NFS? I'll be bringing the NFS client back online today, and I'll narrow it down further. If anyone is familiar with this behavior, feel free to jump in with "Yeah, NFS4 has this problem, go back to NFS3" or something like that.

    Read the article

  • Weighted round robins via TTL - possible?

    - by Joe Hopfgartner
    I currently use DNS round robin for load balancing, which works great. The records look like this (I have a ttl of 120 seconds) ;; ANSWER SECTION: orion.2x.to. 116 IN A 80.237.201.41 orion.2x.to. 116 IN A 87.230.54.12 orion.2x.to. 116 IN A 87.230.100.10 orion.2x.to. 116 IN A 87.230.51.65 I learned that not every ISP / device treats such a response the same way. For example some DNS servers rotate the addresses randomly or always cycle them through. Some just propagate the first entry, others try to determine which is best (regionally near) by looking at the ip address. However if the userbase is big enough (spreads over multiple ISPs etc) it balances pretty well. The discrepancies from highest to lowest loaded server hardly every exceeds 15%. However now I have the problem that I am introducing more servers into the systems, that not all have the same capacities. I currently only have 1gbps servers, but I want to work with 100mbit and also 10gbps servers too. So what I want is I want to introduce a server with 10 GBps with a weight of 100, a 1 gbps server with a weight of 10 and a 100 mbit server with a weight of 1. I used to add servers twice to bring more traffic to them (which worked nice. the bandwidth doubled almost.) But adding a 10gbit server 100 times to DNS is a bit rediculous. So I thought about using the TTL. If I give server A 240 seconds ttl and server B only 120 seconds (which is about about the minimum to use for round robin, as a lot of dns servers set to 120 if a lower ttl is specified.. so i have heard) I think something like this should occour in an ideal scenario: first 120 seconds 50% of requests get server A -> keep it for 240 seconds. 50% of requests get server B -> keep it for 120 seconds second 120 seconds 50% of requests still have server A cached -> keep it for another 120 seconds. 25% of requests get server A -> keep it for 240 seconds 25% of requests get server B -> keep it for 120 seconds third 120 seconds 25% will get server A (from the 50% of Server A that now expired) -> cache 240 sec 25% will get server B (from the 50% of Server A that now expired) -> cache 120 sec 25% will have server A cached for another 120 seconds 12.5% will get server B (from the 25% of server B that now expired) -> cache 120sec 12.5% will get server A (from the 25% of server B that now expired) -> cache 240 sec fourth 120 seconds 25% will have server A cached -> cache for another 120 secs 12.5% will get server A (from the 25% of b that now expired) -> cache 240 secs 12.5% will get server B (from the 25% of b that now expired) -> cache 120 secs 12.5% will get server A (from the 25% of a that now expired) -> cache 240 secs 12.5% will get server B (from the 25% of a that now expired) -> cache 120 secs 6.25% will get server A (from the 12.5% of b that now expired) -> cache 240 secs 6.25% will get server B (from the 12.5% of b that now expired) -> cache 120 secs 12.5% will have server A cached -> cache another 120 secs ... i think i lost something at this point but i think you get the idea.... As you can see this gets pretty complicated to predict and it will for sure not work out like this in practice. But it should definitely have an effect on the distribution! I know that weighted round robin exists and is just controlled by the root server. It just cycles through dns records when responding and returns dns records with a set propability that corresponds to the weighting. My DNS server does not support this, and my requirements are not that precise. If it doesnt weight perfectly its okay, but it should go into the right direction. I think using the TTL field could be a more elegant and easier solution - and it deosnt require a dns server that controls this dynamically, which saves resources - which is in my opinion the whole point of dns load balancing vs hardware load balancers. My question now is... are there any best prectices / methos / rules of thumb to weight round robin distribution using the TTL attribute of DNS records? Edit: The system is a forward proxy server system. The amount of Bandwidth (not requests) exceeds what one single server with ethernet can handle. So I need a balancing solution that distributes the bandwidth to several servers. Are there any alternative methods than using DNS? Of course I can use a load balancer with fibre channel etc, but the costs are rediciulous and it also increases only the width of the bottleneck and does not eliminate it. The only thing i can think of are anycast (is it anycast or multicast?) ip addresses, but I don't have the means to set up such a system.

    Read the article

  • ssh login successful, but scp password gives me "Permission denied"

    - by YANewb
    I'm trying to get some blogging software up on an organizational remote server. I tried to set up a SSH Key but was having problems and decided that getting the blog up and running was more important than dealing with the SSH Key issue, so I ssh-keygen -R remoteserver.com. Now I can successfully login with ssh -v [email protected] and the correct password. Once logged in I can move around and read any file and directory that I should be able to read. But when I try to edit an existing -rw-r--r-- file with VIM, it shows up as read-only, if I try to edit permissions I get chmod: file.ext: Operation not permitted, and if I try to scp a new file from my local machine I'm prompted for the remote user's password, and then get scp: /home/path/to/file.ext: Permission denied. Since I didn't have any of these problems before I tried to set up the ssh key, I suspect these anomalies are a side effect of that, but I don't know how to troubleshoot this. So what does a foolish server-newb, such as myself, need to do to get edit capability back as a remote user? Addendum 1: My userids are different between my local machine and the remote server. For ssh I ssh -v [email protected]. if I whoami I get remoteuser For scp I scp file.ext [email protected]:/path/to/file.ext from the local directory with file.ext while logged in as the local user. if I whoami I get localuser The ls -l for two different files I've tried scp: -rw-r--r--@ 1 localuser localgroup 20 Feb 11 21:03 phpinfo.php -rw-r--r-- 1 root localgroup 4 Feb 11 22:32 test.txt The ls -l for the file I've tried to VIM: -rw-r--r-- 1 remoteuser remotegroup 76 Jul 27 2009 info.txt Addendum 2: In the past I've set up ssh-keys for git repositories. I don't want to completely destroy them, so in an attempt to follow a deer's train of thinking I renamed my ~/.ssh/ to ~/.ssh-bak/, then tested the different types of access. The abridged version of the terminal commands and results is below; I think everything is working until the 8th line from the end. localcomputer:~ localuser$ ssh -v [email protected] OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY The authenticity of host 'remoteserver.com (###.###.###.###)' can't be established. RSA key fingerprint is ##:##:##:##:##:##:##:##:##:##:##:##:##:##:##:##. Are you sure you want to continue connecting (yes/no)? yes Warning: Permanently added 'remoteserver.com,###.###.###.###' (RSA) to the list of known hosts. debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Last login: Sun Feb 12 18:00:54 2012 from 68.69.164.123 FreeBSD 6.4-RELEASE-p8 (VKERN) #1 r101746: Mon Aug 30 10:34:40 MDT 2010 [remoteuser@remoteserver /home]$ ls -l total ### -rw-r--r-- 1 remoteuser remotegroup 76 Aug 12 2009 info.txt [remoteuser@remoteserver /home]$ vim info.txt ~ {at the bottom of the VIM screen it tells me it's [read only]} [remoteuser@remoteserver /home]$ whoami remoteuser [remoteuser@remoteserver /home]$ logout debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: client_input_channel_req: channel 0 rtype [email protected] reply 0 debug1: channel 0: free: client-session, nchannels 1 Connection to remoteserver.com closed. Transferred: sent 3872, received 12496 bytes, in 107.4 seconds Bytes per second: sent 36.1, received 116.4 debug1: Exit status 0 localcomputer:localdirectory name$ scp -v phpinfo.php [email protected]:/home/www/remotedirectory/phpinfo.php Executing: program /usr/bin/ssh host remoteserver.com, user remoteuser, command scp -v -t /home/www/remotedirectory/phpinfo.php OpenSSH_5.2p1, OpenSSL 0.9.8l 5 Nov 2009 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to remoteserver.com [###.###.###.###] port 22. debug1: Connection established. debug1: identity file /Users/localuser/.ssh/identity type -1 debug1: identity file /Users/localuser/.ssh/id_rsa type -1 debug1: identity file /Users/localuser/.ssh/id_dsa type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8p2 FreeBSD-20110503 debug1: match: OpenSSH_5.8p2 FreeBSD-20110503 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'remoteserver.com' is known and matches the RSA host key. debug1: Found key in /Users/localuser/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password debug1: Next authentication method: publickey debug1: Trying private key: /Users/localuser/.ssh/identity debug1: Trying private key: /Users/localuser/.ssh/id_rsa debug1: Trying private key: /Users/localuser/.ssh/id_dsa debug1: Next authentication method: password [email protected]'s password: debug1: Authentication succeeded (password). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: Sending command: scp -v -t /home/www/remotedirectory/phpinfo.php Sending file modes: C0644 20 phpinfo.php Sink: C0644 20 phpinfo.php scp: /home/www/remotedirectory/phpinfo.php: Permission denied debug1: client_input_channel_req: channel 0 rtype exit-status reply 0 debug1: channel 0: free: client-session, nchannels 1 debug1: fd 0 clearing O_NONBLOCK debug1: fd 1 clearing O_NONBLOCK Transferred: sent 1456, received 2160 bytes, in 0.6 seconds Bytes per second: sent 2322.3, received 3445.1 debug1: Exit status 1

    Read the article

  • .htaccess not working (mod_rewrite)

    - by Mike Curry
    Edit: I am pretty sure my .htaccess file is NOT being executed, and the problem is NOT with my rewrite rules. I have not having any luck getting my .htaccess with mod_rewrite working. Basically all I am trying to do is remove 'www' from "http://www.site.com" and "https://www.site.com". If there is anything I am missing (conf files, etc let me know I willl update this) I jsut can't see whats wrong here... I am using a 1&1 VPS III Virtual private server... anyone ever have this issue? I am using Ubuntu 8.04 Server LTS. Here is my .htaccess file (located @ /var/www/site/trunk/html/) Options +FollowSymLinks RewriteEngine on RewriteCond %{HTTP_HOST} ^www\.(.*) [NC] RewriteRule (.*) //%1/$1 [L,R=301] My mod_rewrite is enabled: The auto regenerated sym link is there in mods-available and /usr/lib/apache2/modules/ contains mod_rewrite.so root@s15348441:/etc/apache2/mods-available# more rewrite.load LoadModule rewrite_module /usr/lib/apache2/modules/mod_rewrite.so root@s15348441:/var/log# apache2ctl -t -D DUMP_MODULES Loaded Modules: core_module (static) log_config_module (static) logio_module (static) mpm_prefork_module (static) http_module (static) so_module (static) alias_module (shared) auth_basic_module (shared) authn_file_module (shared) authz_default_module (shared) authz_groupfile_module (shared) authz_host_module (shared) authz_user_module (shared) autoindex_module (shared) cgi_module (shared) dir_module (shared) env_module (shared) mime_module (shared) negotiation_module (shared) php5_module (shared) rewrite_module (shared) setenvif_module (shared) ssl_module (shared) status_module (shared) Syntax OK My apache config files: apache2.conf # # Based upon the NCSA server configuration files originally by Rob McCool. # # This is the main Apache server configuration file. It contains the # configuration directives that give the server its instructions. # See http://httpd.apache.org/docs/2.2/ for detailed information about # the directives. # # Do NOT simply read the instructions in here without understanding # what they do. They're here only as hints or reminders. If you are unsure # consult the online docs. You have been warned. # # The configuration directives are grouped into three basic sections: # 1. Directives that control the operation of the Apache server process as a # whole (the 'global environment'). # 2. Directives that define the parameters of the 'main' or 'default' server, # which responds to requests that aren't handled by a virtual host. # These directives also provide default values for the settings # of all virtual hosts. # 3. Settings for virtual hosts, which allow Web requests to be sent to # different IP addresses or hostnames and have them handled by the # same Apache server process. # # Configuration and logfile names: If the filenames you specify for many # of the server's control files begin with "/" (or "drive:/" for Win32), the # server will use that explicit path. If the filenames do *not* begin # with "/", the value of ServerRoot is prepended -- so "/var/log/apache2/foo.log" # with ServerRoot set to "" will be interpreted by the # server as "//var/log/apache2/foo.log". # ### Section 1: Global Environment # # The directives in this section affect the overall operation of Apache, # such as the number of concurrent requests it can handle or where it # can find its configuration files. # # # ServerRoot: The top of the directory tree under which the server's # configuration, error, and log files are kept. # # NOTE! If you intend to place this on an NFS (or otherwise network) # mounted filesystem then please read the LockFile documentation (available # at <URL:http://httpd.apache.org/docs-2.1/mod/mpm_common.html#lockfile>); # you will save yourself a lot of trouble. # # Do NOT add a slash at the end of the directory path. # ServerRoot "/etc/apache2" # # The accept serialization lock file MUST BE STORED ON A LOCAL DISK. # #<IfModule !mpm_winnt.c> #<IfModule !mpm_netware.c> LockFile /var/lock/apache2/accept.lock #</IfModule> #</IfModule> # # PidFile: The file in which the server should record its process # identification number when it starts. # This needs to be set in /etc/apache2/envvars # PidFile ${APACHE_PID_FILE} # # Timeout: The number of seconds before receives and sends time out. # Timeout 300 # # KeepAlive: Whether or not to allow persistent connections (more than # one request per connection). Set to "Off" to deactivate. # KeepAlive On # # MaxKeepAliveRequests: The maximum number of requests to allow # during a persistent connection. Set to 0 to allow an unlimited amount. # We recommend you leave this number high, for maximum performance. # MaxKeepAliveRequests 100 # # KeepAliveTimeout: Number of seconds to wait for the next request from the # same client on the same connection. # KeepAliveTimeout 15 ## ## Server-Pool Size Regulation (MPM specific) ## # prefork MPM # StartServers: number of server processes to start # MinSpareServers: minimum number of server processes which are kept spare # MaxSpareServers: maximum number of server processes which are kept spare # MaxClients: maximum number of server processes allowed to start # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_prefork_module> StartServers 5 MinSpareServers 5 MaxSpareServers 10 MaxClients 150 MaxRequestsPerChild 0 </IfModule> # worker MPM # StartServers: initial number of server processes to start # MaxClients: maximum number of simultaneous client connections # MinSpareThreads: minimum number of worker threads which are kept spare # MaxSpareThreads: maximum number of worker threads which are kept spare # ThreadsPerChild: constant number of worker threads in each server process # MaxRequestsPerChild: maximum number of requests a server process serves <IfModule mpm_worker_module> StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 </IfModule> # These need to be set in /etc/apache2/envvars User ${APACHE_RUN_USER} Group ${APACHE_RUN_GROUP} # # AccessFileName: The name of the file to look for in each directory # for additional configuration directives. See also the AllowOverride # directive. # AccessFileName .htaccess # # The following lines prevent .htaccess and .htpasswd files from being # viewed by Web clients. # <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> # # DefaultType is the default MIME type the server will use for a document # if it cannot otherwise determine one, such as from filename extensions. # If your server contains mostly text or HTML documents, "text/plain" is # a good value. If most of your content is binary, such as applications # or images, you may want to use "application/octet-stream" instead to # keep browsers from trying to display binary files as though they are # text. # DefaultType text/plain # # HostnameLookups: Log the names of clients or just their IP addresses # e.g., www.apache.org (on) or 204.62.129.132 (off). # The default is off because it'd be overall better for the net if people # had to knowingly turn this feature on, since enabling it means that # each client request will result in AT LEAST one lookup request to the # nameserver. # HostnameLookups Off # ErrorLog: The location of the error log file. # If you do not specify an ErrorLog directive within a <VirtualHost> # container, error messages relating to that virtual host will be # logged here. If you *do* define an error logfile for a <VirtualHost> # container, that host's errors will be logged there and not here. # ErrorLog /var/log/apache2/error.log # # LogLevel: Control the number of messages logged to the error_log. # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. # LogLevel warn # Include module configuration: Include /etc/apache2/mods-enabled/*.load Include /etc/apache2/mods-enabled/*.conf # Include all the user configurations: Include /etc/apache2/httpd.conf # Include ports listing Include /etc/apache2/ports.conf # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent # # ServerTokens # This directive configures what you return as the Server HTTP response # Header. The default is 'Full' which sends information about the OS-Type # and compiled in modules. # Set to one of: Full | OS | Minor | Minimal | Major | Prod # where Full conveys the most information, and Prod the least. # ServerTokens Full # # Optionally add a line containing the server version and virtual host # name to server-generated pages (internal error documents, FTP directory # listings, mod_status and mod_info output etc., but not CGI generated # documents or custom error documents). # Set to "EMail" to also include a mailto: link to the ServerAdmin. # Set to one of: On | Off | EMail # ServerSignature On # # Customizable error responses come in three flavors: # 1) plain text 2) local redirects 3) external redirects # # Some examples: #ErrorDocument 500 "The server made a boo boo." #ErrorDocument 404 /missing.html #ErrorDocument 404 "/cgi-bin/missing_handler.pl" #ErrorDocument 402 http://www.example.com/subscription_info.html # # # Putting this all together, we can internationalize error responses. # # We use Alias to redirect any /error/HTTP_<error>.html.var response to # our collection of by-error message multi-language collections. We use # includes to substitute the appropriate text. # # You can modify the messages' appearance without changing any of the # default HTTP_<error>.html.var files by adding the line: # # Alias /error/include/ "/your/include/path/" # # which allows you to create your own set of files by starting with the # /usr/share/apache2/error/include/ files and copying them to /your/include/path/, # even on a per-VirtualHost basis. The default include files will display # your Apache version number and your ServerAdmin email address regardless # of the setting of ServerSignature. # # The internationalized error documents require mod_alias, mod_include # and mod_negotiation. To activate them, uncomment the following 30 lines. # Alias /error/ "/usr/share/apache2/error/" # # <Directory "/usr/share/apache2/error"> # AllowOverride None # Options IncludesNoExec # AddOutputFilter Includes html # AddHandler type-map var # Order allow,deny # Allow from all # LanguagePriority en cs de es fr it nl sv pt-br ro # ForceLanguagePriority Prefer Fallback # </Directory> # # ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var # ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var # ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var # ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var # ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var # ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var # ErrorDocument 410 /error/HTTP_GONE.html.var # ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var # ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var # ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var # ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var # ErrorDocument 415 /error/HTTP_UNSUPPORTED_MEDIA_TYPE.html.var # ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var # ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var # ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var # ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var # ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var # Include of directories ignores editors' and dpkg's backup files, # see README.Debian for details. # Include generic snippets of statements Include /etc/apache2/conf.d/ # Include the virtual host configurations: Include /etc/apache2/sites-enabled/ My default config file for www on apache NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My ssl config file NameVirtualHost *:443 <VirtualHost *:443> ServerAdmin [email protected] #SSLEnable #SSLVerifyClient none #SSLCertificateFile /usr/local/ssl/crt/public.crt #SSLCertificateKeyFile /usr/local/ssl/private/private.key DocumentRoot /var/www/site/trunk/html <Directory /> Options FollowSymLinks AllowOverride all </Directory> <Directory /var/www/site/trunk/html> Options Indexes FollowSymLinks MultiViews AllowOverride all Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn SSLEngine On SSLCertificateFile /usr/local/ssl/crt/public.crt SSLCertificateKeyFile /usr/local/ssl/private/private.key CustomLog /var/log/apache2/access.log combined ServerSignature On Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> My /etc/apache2/httpd.conf is blank The directory /etc/apache2/conf.d has nothing in it but one file (charset) contents of /etc/apache2/conf.dcharset # Read the documentation before enabling AddDefaultCharset. # In general, it is only a good idea if you know that all your files # have this encoding. It will override any encoding given in the files # in meta http-equiv or xml encoding tags. #AddDefaultCharset UTF-8 My apache error.log [Wed Jun 03 00:12:31 2009] [error] [client 216.168.43.234] client sent HTTP/1.1 request without hostname (see RFC2616 section 14.23): /w00tw00t.at.ISC.SANS.DFind:) [Wed Jun 03 05:03:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:03:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:48 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:13:57 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:17:28 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 05:26:23 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 05:26:34 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:03:41 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:03:51 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 06:25:07 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 06:25:17 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 12:09:25 2009] [error] [client 61.139.105.163] File does not exist: /var/www/site/trunk/html/fastenv [Wed Jun 03 15:04:42 2009] [notice] Graceful restart requested, doing restart [Wed Jun 03 15:04:43 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations [Wed Jun 03 15:29:51 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:29:54 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:30:32 2009] [error] [client 99.247.237.46] File does not exist: /var/www/site/trunk/html/favicon.ico [Wed Jun 03 15:45:54 2009] [notice] caught SIGWINCH, shutting down gracefully [Wed Jun 03 15:46:05 2009] [notice] Apache/2.2.8 (Ubuntu) PHP/5.2.4-2ubuntu5.6 with Suhosin-Patch mod_ssl/2.2.8 OpenSSL/0.9.8g configured -- resuming normal operations

    Read the article

  • With dnsmasq as the DNS server, 'dig' and 'ping' succeed while 'nslookup' fails

    - by einpoklum
    I installed dnsmasq on a machine of mine (It's a Kubuntu 12.04 LTS), backed only by /etc/hosts (no connection to the Internet until later). Now, if I dig mymachine, I get 192.168.0.1, but if I try to nslookup mymachine, I get: >> connection timed out; no servers could be reached Tried also nslookup mymachine.mynicedomain.org - didn't work either. pinging (Edit:) succeeds. This happens both on the server machine itself and on other machines on the network. How can I the DNS lookups to work? What problem is preventing nslookup from succeeding? Additional Information In the server's /etc/hosts: 192.168.0.1 mymachine In the server's nsswitch.conf: hosts: files mdns4_mininal [NOTFOUND=return] dns mdns4 (admittedly, this is a bit weird; but I also tried: hosts: files dns instead, with the same effect) In resolv.conf (which is generated by dnsmasq): nameserver 127.0.0.1 search mynicedomain.org In the server's /etc/hosts.allow: domain: ALL In the other machines' /etc/resolv.conf (this is set by the DHCP client): nameserver 192.168.0.1 search mynicedomain.org Relevant netstat output on the server: Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:53 0.0.0.0:* LISTEN tcp 0 0 192.168.0.1:53 0.0.0.0:* LISTEN Finally, here's the ipconfig output from one of the client machines on the network (running Windows 7): Connection-specific DNS Suffix . : mynicedomain.org Description . . . . . . . . . . . : Intel(R) 82579LM Gigabit Network Connection Physical Address. . . . . . . . . : 12-34-56-78-9A-BC DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.0.50(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Sunday, October 20th 2013 16:20:25 Lease Expires . . . . . . . . . . : Sunday, October 20th 2013 18:20:24 Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Notes: May be related to this question.

    Read the article

  • Are free operator->* overloads evil?

    - by Potatoswatter
    I was perusing section 13.5 after refuting the notion that built-in operators do not participate in overload resolution, and noticed that there is no section on operator->*. It is just a generic binary operator. Its brethren, operator->, operator*, and operator[], are all required to be non-static member functions. This precludes definition of a free function overload to an operator commonly used to obtain a reference from an object. But the uncommon operator->* is left out. In particular, operator[] has many similarities. It is binary (they missed a golden opportunity to make it n-ary), and it accepts some kind of container on the left and some kind of locator on the right. Its special-rules section, 13.5.5, doesn't seem to have any actual effect except to outlaw free functions. (And that restriction even precludes support for commutativity!) So, for example, this is perfectly legal (in C++0x, remove obvious stuff to translate to C++03): #include <utility> #include <iostream> #include <type_traits> using namespace std; template< class F, class S > typename common_type< F,S >::type operator->*( pair<F,S> const &l, bool r ) { return r? l.second : l.first; } template< class T > T & operator->*( pair<T,T> &l, bool r ) { return r? l.second : l.first; } template< class T > T & operator->*( bool l, pair<T,T> &r ) { return l? r.second : r.first; } int main() { auto x = make_pair( 1, 2.3 ); cerr << x->*false << " " << x->*4 << endl; auto y = make_pair( 5, 6 ); y->*(0) = 7; y->*0->*y = 8; // evaluates to 7->*y = y.second cerr << y.first << " " << y.second << endl; } I can certainly imagine myself giving into temp[la]tation. For example, scaled indexes for vector: v->*matrix_width[2][5] = x; Did the standards committee forget to prevent this, was it considered too ugly to bother, or are there real-world use cases?

    Read the article

  • c - fork() and wait()

    - by Joe
    Hi there, I need to use the fork() and wait() functions to complete an assignment. We are modelling non-deterministic behaviour and need the program to fork() if there is more than one possible transition. In order to try and work out how fork and wait work, I have just made a simple program. I think I understand now how the calls work and would be fine if the program only branched once because the parent process could use the exit status from the single child process to determine whether the child process reached the accept state or not. As you can see from the code that follows though, I want to be able to handle situations where there must be more than one child processes. My problem is that you seem to only be able to set the status using an _exit function once. So, as in my example the exit status that the parent process tests for shows that the first child process issued 0 as it's exit status, but has no information on the second child process. I tried simply not _exit()-ing on a reject, but then that child process would carry on, and in effect there would seem to be two parent processes. Sorry for the waffle, but I would be grateful if someone could tell me how my parent process could obtain the status information on more than one child process, or I would be happy for the parent process to only notice accept status's from the child processes, but in that case I would successfully need to exit from the child processes which have a reject status. My test code is as follows: #include <stdio.h> #include <unistd.h> #include <stdlib.h> #include <errno.h> #include <sys/wait.h> int main(void) { pid_t child_pid, wpid, pid; int status = 0; int i; int a[3] = {1, 2, 1}; for(i = 1; i < 3; i++) { printf("i = %d\n", i); pid = getpid(); printf("pid after i = %d\n", pid); if((child_pid = fork()) == 0) { printf("In child process\n"); pid = getpid(); printf("pid in child process is %d\n", pid); /* Is a child process */ if(a[i] < 2) { printf("Should be accept\n"); _exit(1); } else { printf("Should be reject\n"); _exit(0); } } } if(child_pid > 0) { /* Is the parent process */ pid = getpid(); printf("parent_pid = %d\n", pid); wpid = wait(&status); if(wpid != -1) { printf("Child's exit status was %d\n", status); if(status > 0) { printf("Accept\n"); } else { printf("Complete parent process\n"); if(a[0] < 2) { printf("Accept\n"); } else { printf("Reject\n"); } } } } return 0; } Many thanks Joe

    Read the article

  • How to avoid flickering in jquery?

    - by Pandiya Chendur
    I am using jquery with asp.net webforms..... I am using asp.net pagemethods and jquery.... I am emptying a div on click of anchor tags and filling it with new content.... What happens is my div flickers when my new data is loaded to it... How to avoid this in jquery? Can i use any effect for this.... <script type="text/javascript"> $(document).ready(function() { getRecordspage(1, 5); $("a.page-numbers").click(function() { $("#ResultsDiv").empty(); getRecordspage($(this).text(), 5) }); }); </script> and my page, <body> <form id="form1" runat="server"> <div id="ResultsDiv"> </div> <div class="pager"> <a ID="lnkbtn0" class="page-numbers" href="javascript:void(0);">1</a> <a ID="lnkbtn1" class="page-numbers" href="javascript:void(0);">2</a> <a ID="lnkbtn2" class="page-numbers" href="javascript:void(0);">3</a> <a ID="lnkbtn3" class="page-numbers" href="javascript:void(0);">4</a> </div> </form> </body> and my getRecordspage() function is function getRecordspage(curPage, pagSize) { $.ajax({ type: "POST", url: "Default.aspx/GetRecords", data: "{'currentPage':" + curPage + ",'pagesize':" + pagSize + "}", contentType: "application/json; charset=utf-8", dataType: "json", success: function(jsonObj) { var strarr = jsonObj.d.split('##'); var jsob = jQuery.parseJSON(strarr[0]); $.each(jsob.Table, function(i, employee) { $('<div class="resultsdiv"><br /><span class="resultName">' + employee.Emp_Name + '</span><span class="resultfields" style="padding-left:100px;">Category&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Desig_Name + '</span><br /><br /><span id="SalaryBasis" class="resultfields">Salary Basis&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.SalaryBasis + '</span><span class="resultfields" style="padding-left:25px;">Salary&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.FixedSalary + '</span><span style="font-size:110%;font-weight:bolder;padding-left:25px;">Address&nbsp;:</span>&nbsp;<span class="resultfieldvalues">' + employee.Address + '</span></div>').appendTo('#ResultsDiv'); }); $(".resultsdiv:even").addClass("resultseven"); $(".resultsdiv").hover(function() { $(this).addClass("resultshover"); }, function() { $(this).removeClass("resultshover"); }); } }); }

    Read the article

< Previous Page | 256 257 258 259 260 261 262 263 264 265 266 267  | Next Page >