Search Results

Search found 26977 results on 1080 pages for 'input device'.

Page 261/1080 | < Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >

• Can two Identical devices be present on the same bus in any PCI Topology

  - by vaibbhav

  As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

  Read the article

• Can two Identical devices be present on the same bus in any PCI Topology

  - by vaibbhav

  As per the PCI standard, devices are identified on the basis of Vendor Id, Device Id and the bus no. All devices of same type have identical vendor id and device id. If I put two such devices on the same bus say bus 0. How will the PCI Software Subsystem distinguish between the two? If such a case is not possible in PCI, then can such thing be possible through PCI Express Switch?

  Read the article

• Get caller id and append to url in browser automatically

  - by timbad2021

  I am trying to find a caller id device/program that will automatically open a browser and append the incoming phone number to a url when receiving a call. For example: https://www.myphonesearchapp.com/search?q=5733655593 This would probably be a usb device that you would run a phone line through that will get caller id and allow you to set custom commands like append the number to a url and launching it in a Browser. Thanks!

  Read the article

• Redhat linux terminal garbage output when using telnet

  - by Dinesh

  I am using redhat-linux terminal to connect to a router device by means of 'telnet'. While the device boots, the characters are getting printed in garbage manner which is as follows, In terminal, If I click on the the menu 'Terminal'-- 'Reset', then it is getting changed to proper alphabetical. Is there any way available to prevent it ? I have tried setting the encoding of the terminal to UTF-8 from the menu options. But, still the same issue.

  Read the article

• Running resize2fs on /

  - by Paul Steckler

  I'm trying to resize an ext4 filesystem on a Fedora 11 box. Using fsdisk and lvm, I was able to grow the partition and logical volume containing the filesystem. When I try to run resize2fs on the device containing the filesystem (/dev/sda2 in this case), I get: "Device or resource busy while trying to open /dev/sda2, Couldn't find valid filesystem superblock" I've tried this from a rescue disk that doesn't have the filesystem mounted, no joy. Maybe resize2fs doesn't know about ext4?

  Read the article

• "System cannot find the file specified" trying to reinstall network driver.

  - by Justin Love

  After uninstalling Symantec Enpoint Protection (manually) one computer (Windows XP) has an inoperative NIC; it shows up in device manager as conflicted. I tried doing a windows repair from CD, which did not improve the situation. When I went to reinstall the drivers, driver installation failed with: Cannot install this hardware The system cannot find the file specified I've deleted the NIC in device manager without improvement.

  Read the article

• External USB disk drive cannot be remounted in Windows XP

  - by jackhab

  I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

  Read the article

• Iptables QUEUE Target and Snort

  - by bradlis7

  I'm trying to set up a firewall with support for snort, and it is dropping all of my packets when I add the QUEUE target. I've made it like this, but the QUEUE target is not allowing the packets to be processed any further: -A INPUT -p tcp -m tcp --dport 22 -j ACCEPT -A INPUT -j QUEUE -A INPUT -j ACCEPT # It's not allowing anything past QUEUE, as you can see below in the count. > iptables -I INPUT -nv pkts bytes target prot opt in out source destination 6707 395K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:22 933 138K QUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 I'm eventually going to change it to forward, but I'm just trying to get it working for now. I start snort like so: snort -Q -D -c /etc/snort/snort.conf EDIT: More Information When I run it, it still sees the packets without having an iptables QUEUE target rule, but when I add a QUEUE target, it starts losing all of my packets. # snort -Qc /etc/snort/snort.conf -N -A console Enabling inline operation Running in IDS mode --== Initializing Snort ==-- Initializing Output Plugins! Initializing Preprocessors! Initializing Plug-ins! Parsing Rules file "/etc/snort/snort.conf" ## === CUT === *** *** interface device lookup found: bond0 *** Initializing Network Interface bond0 Decoding Ethernet on interface bond0 ## === CUT === Not Using PCAP_FRAMES So, it says inline, but the it says it's using bond0. Inline should not require an interface, right?

  Read the article

• How do I convert a video to GIF using ffmpeg, with reasonable quality?

  - by Kamil Hismatullin

  I'm converting .flv movie to .gif file with ffmpeg. ffmpeg -i input.flv -ss 00:00:00.000 -pix_fmt rgb24 -r 10 -s 320x240 -t 00:00:10.000 output.gif It works great, but output gif file has a very law quality. Any ideas how can I improve quality of converted gif? Output of command: $ ffmpeg -i input.flv -ss 00:00:00.000 -pix_fmt rgb24 -r 10 -s 320x240 -t 00:00:10.000 output.gif ffmpeg version 0.8.5-6:0.8.5-0ubuntu0.12.10.1, Copyright (c) 2000-2012 the Libav developers built on Jan 24 2013 14:52:53 with gcc 4.7.2 *** THIS PROGRAM IS DEPRECATED *** This program is only provided for compatibility and will be removed in a future release. Please use avconv instead. Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'input.flv': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: isommp42 creation_time : 2013-02-14 04:00:07 Duration: 00:00:18.85, start: 0.000000, bitrate: 3098 kb/s Stream #0.0(und): Video: h264 (High), yuv420p, 1280x720, 2905 kb/s, 25 fps, 25 tbr, 50 tbn, 50 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream #0.1(und): Audio: aac, 44100 Hz, stereo, s16, 192 kb/s Metadata: creation_time : 2013-02-14 04:00:07 [buffer @ 0x92a8ea0] w:1280 h:720 pixfmt:yuv420p [scale @ 0x9215100] w:1280 h:720 fmt:yuv420p -> w:320 h:240 fmt:rgb24 flags:0x4 Output #0, gif, to 'output.gif': Metadata: major_brand : mp42 minor_version : 0 compatible_brands: isommp42 creation_time : 2013-02-14 04:00:07 encoder : Lavf53.21.1 Stream #0.0(und): Video: rawvideo, rgb24, 320x240, q=2-31, 200 kb/s, 90k tbn, 10 tbc Metadata: creation_time : 1970-01-01 00:00:00 Stream mapping: Stream #0.0 -> #0.0 Press ctrl-c to stop encoding frame= 101 fps= 32 q=0.0 Lsize= 8686kB time=10.10 bitrate=7045.0kbits/s dup=0 drop=149 video:22725kB audio:0kB global headers:0kB muxing overhead -61.778676% Thanks.

  Read the article

• A PCI-to-PCI bridge cannot start

  - by midtiby

  Hi I'm trying to use a DeLock PCMCIA adapter, CardBus to 2 x FireWire to get firewire connectivity on my laptop. It worked a few weeks ago, but now I get the message. "This device cannot start (Code 10)" when I look it up in Device manager. Any ideas of how to get it up and running? I am running Windows XP SP3

  Read the article

• How to stop Time Machine on Mac use of removable disk?

  - by ablmf

  One of my friend recently bought a Mac and somehow when she connect her removable disk to the computer, Time Machine took control of this device uses it as backup device automatically -- she could not use the disk for other purpose any more. When we connect it to windows, it could not be recognize any more. How can we get it back under control?

  Read the article

• Windows XP doesn't recognize iPhone as a camera

  - by ines

  My iPhone 3GS doesn´t show up in the Scanners and Cameras tool when I connect it via USB to Windows XP. Nor does the Camera Wizard pop up. How do I make Windows XP detect the device as a Camera? I currently have no way of downloading photos from the iPhone to my computer. iTunes does recognize the device, but it doesn't offer a way to synchronize photos. Thanks for your help.

  Read the article

• How to mount a USB thumb drive as "Fixed" instead of "Removable"

  - by AMissico

  I have over 8 GB in my "Code Library" that I maintain on a 64 GB ScanDisk Ultra Backup USB Device. Windows Search 4.0 (installed on Windows XP) can index removable drives, but Windows 7 (which uses Windows Search 4.0) cannot, because the USB device identifies itself as a Removable drive and Windows 7 refuses to index removable drives. How can I mount the USB Thumb Drive as Fixed instead of Removable?

  Read the article

• Is "Turn Off Windows write-cache buffer flushing" safe on a laptop?

  - by Earlz

  my laptop's internal harddrive is a bit slow. I looked at the drive properties and there are two options: [X] Enable write caching on the device [ ] Turn off windows write-cache buffer flushing on the device As you can see, the first option is checked already, but the second option isn't. I've heard the second option can really speed things up, but it also sounds very risky. Is it safe to do on a laptop that rarely is off of AC power? (but still has battery as well)

  Read the article

• Power on from standby with wireless keyboard

  - by ULTRA_POROV

  S3 standby state. Set power-on by usb device in bios. Enabled standby power-on in device manager on the keyboard. No effect. Any ideas? Is it possible?

  Read the article

• Citrix XenDesktop create an image to work across multiple hardware devices

  - by JohnyV

  I have created an image using this guide http://support.citrix.com/article/CTX119877. However this only works for virtual and the model that I made the image on how can i extend compatibility to another device? I am just using it for a vdisk that I can then also use as a virtual device but I wasnt the vdisk to be available over multiple devices. Using Win 7 on the client. Thanks

  Read the article

• Sending ASCII characters on Mac USB/RS232 cable

  - by Olivier

  Hello, I have a RS232C/USB cable to connect an electronic device to my iMac Intel (MacOSX SnowLeo 10.6.3). Is there a utility program that allows for sending ASCII characters on the USB port that the RS232C device will understand? If possible, I'd rather avoid programming. I'd prefer an Automator script or a simple program with a GUI. Thanks

  Read the article

• What is the default mount point on Linux systems (all)?

  - by Vijay Sharma

  My question is very basic in nature. Is the mount point for external media (like USB) always /media? Because in a Debian system, if I plug in any USB device that goes to the /media folder. So is it the case with all the other Linux flavors like Fedora, Ubuntu, etc. If a USB device is automatically mounted will it always go to the /media directory?

  Read the article

• Failed to re-publish a page - Tridion 2011 SP1

  - by Wilson Yu

  We are getting some strange error when re-publishing the same page. The page was published successfully the first time and we can see the page from presentation server. It failed with the following error (see below) when we tried to publish it again (no change to page). The page ran OK within template builder and we got the correct html output, it failed in the last committing deployment step (Prepare Transport, Transporting, Preparing Deployment and Deploying are all successful). Once it fails to publish the second time, it always fails to publish, and we can't un-publish it either. Also when we make a copy of the failed page and create a new page, we can publish the new page first time, the new page then fails to publush the second time with the same error. Does anyone know what would cause this error? any help would be greatly appreciated. Here is the error msg: Committing Deployment Failed Phase: Deployment Prepare Commit Phase failed, Unable to prepare transaction: tcm:0-4210-66560, For input string: "", For input string: "", Unable to prepare transaction: tcm:0-4210-66560, For input string: "", For input string: ""

  Read the article

• What Linux distro should I install on an old PowerPC Mac?

  - by rockit

  I'm trying to set up my brother–who has a PPC Mac with 1 GHz processor and 256 MB RAM–with a Linux distro that would allow him to surf the web on the device. If anyone knows of this Mac, they also know that support has faded for the latest browsers, rendering the device essentially useless when it comes to the web. Ideally I would have installed Jolicloud, but alas, it is only Intel Mac compatible... Please let me know if you have any suggestions for me!

  Read the article

• Grub problem with dual boot Ubuntu & XP (Ubuntu installed first)

  - by c00lryguy

  I had Ubuntu installed and I installed XP. I tried to be able to dual boot them by running an Ubuntu live cd and running ~ $ sudo grub grub> root (hd0,0) grub> setup (hd0) But now when I restart I get a black screen that says 'Boot device Selected Boot Device and press any key No matter what key I press it shows this error This is what my system looks like: /dev/sda1 - Ubuntu - ext3 - 73 GiB /dev/sda2 - Ubuntu - extended - 3.16 GiB /dev/sda5 - Ubuntu - linux-swap - 3.16 GiB /dev/sdb1 - Windows XP - ntfs - 76 GiB /dev/sdc1 - Stuff - ext3 - Code/Documents /dev/sdd2 - Stuff - ext3 - Movies/Music

  Read the article

• LaserJet M1522nF firmware was corrupted during the update

  - by AAA-Super

  I have a LaserJet M1522nF, and the problem when I working on is that it is freezing every time so I decide to update the firmware. During the updating the device was down because of electricity so I turned it on again and there is a message on the small screen saing HEWLETT-PACKARD After nothing appeared on screen the device seems to be blocked or the firmware was corrupted. Now, how can I reset the update of firmware or how can I reinstall it?

  Read the article

• Virtualbox port forwarding with iptables

  - by jverdeyen

  I'm using a virtualmachine (virtualbox) as mailserver. The host is an Ubuntu 12.04 and the guest is an Ubuntu 10.04 system. At first I forwarded port 25 to 2550 on the host and added a port forward rule in VirtualBox from 2550 to 25 on the guest. This works for all ports needed for the mailserver. The guest has a host only connection and a NAT (with the port-forwarding). My mailserver was receiving and sending mail properly. But all connections are comming from the virtualbox internal ip, so every host connection is allowed, and that's not what I want. So.. I'm trying to skip the VirtualBox forwarding part and just forward port 25 to my host only ip of the guest system. I used these rules: iptables -F iptables -P INPUT ACCEPT iptables -P OUTPUT ACCEPT iptables -P FORWARD ACCEPT iptables -t nat -P PREROUTING ACCEPT iptables -t nat -P POSTROUTING ACCEPT iptables -A INPUT --protocol tcp --dport 25 -j ACCEPT iptables -A INPUT -i lo -j ACCEPT iptables -A INPUT -s 192.168.99.0/24 -i vboxnet0 -j ACCEPT echo 1 > /proc/sys/net/ipv4/ip_forward iptables -t nat -A PREROUTING -p tcp -i eth0 -d xxx.host.ip.xxx --dport 25 -j DNAT --to 192.168.99.105:25 iptables -A FORWARD -s 192.168.99.0/24 -i vboxnet0 -p tcp --dport 25 -j ACCEPT iptables -t nat -A POSTROUTING -s 192.168.99.0 -o eth0 -j MASQUERADE iptables -L -n But after these changes I still can't connect with a simple telnet. (Which was possible with my first solution). The guest machine doesn't have any firewall. I only have one network interface on the host (eth0) and a host interface (vboxnet0). Any suggestions? Or should I go back to my old solution (which I don't really like). Edit: bridge mode isn't an option, I have only on IP available for the moment. Thanks!

  Read the article

• graphic error on console

  - by Christian Elsner

  I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

  Read the article

• Copying between 2 network devices

  - by Dave Rook

  My network has 3 devices - 1 PC and 2 other network devices (which could be PC, NAS, external hard drive etc) If I want to copy data from one network device to another network device from my PC (using the copy and paste method (i.e right click a file, select copy and then right click into the destination folder and click paste) and therefore not using any tools that could be built into the network devices for such a transaction), does the data get routed via my PC or use my systems resources?

  Read the article

< Previous Page | 257 258 259 260 261 262 263 264 265 266 267 268  | Next Page >