Search Results

Search found 39751 results on 1591 pages for 'add'.

Page 263/1591 | < Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >

• SharePoint Upgrade Global Nav Quirks?

  - by elorg

  We're working on a parallel install/upgrade of SharePoint. The client has WSS 2003 on some old hardware. We've installed MOSS 2007 in a medium farm environment. They want to use this as an opportunity to not just upgrade and use the new features, but to also better organize their content and categorize between different site collections. To accommodate, we've created a few site collections per their specifications in the new environment, and when we ran an upgrade test run we ran into a few .. quirks. We made a backup of the old content database, copied it over to the new environment and restored it as a new database. Created a new web app and attached the migrated data to do an in-place upgrade in this new "test" area. This seems pretty standard - no issues. We have to do a little bit of cleanup (e.g. reset pages to site definition, reset themes, and inherit the global nav / top link bar, etc.). Once that's done, we're using stsadm export/import to copy the individual sites over to their ultimate destinations in the various different site collections. So far so good. But then we ran into one particular site that has a link to an .aspx page in the top link bar in WSS 2003 that's not behaving properly after the upgrade. It's just a link to a "dashboard" .aspx page in a doc library - nothing special. It doesn't seem to matter what we do, or what order we do it (in the "test" web app, in the destination web app, or both). In the end, this ONE site will not allow us to create a link/tab in the global nav. It can inherit the global nav just fine. We can break the inheritance just fine. But if we want to manually add a link in the top link bar - we go through the steps that I've done 1,000x before and click OK - and the tab never appears. It doesn't matter if it's to a page within the site itself, or to Google. We can migrate over other sites into the same site collection and add a tab without issue. If we migrate this quirky site over to another site collection we run into the same issue. Yet, in the "test" web app that we're using to upgrade the data we can add a tab? If we add the tab before we export/import to the final destination, the tab is lost during the process? Has anyone run into anything like this? Any ideas? I've tried every combination of everything that I can think of and nothing works. Unless we can figure out how to get this to work, we're going to just add this tab to the global nav for the entire site collection and inherit it for this site (but that adds the link to all of the site that will inherit, which is both a pro & con for them).

  Read the article

• Can't get bonding and bridging to work for KVM

  - by user9546

  Hi everyone. I can't for the life of me get bonding and bridging to work for the KVM setup I'm building. I'm using a fresh install (not an upgrade) of Ubuntu Server 10.10. I have 4 NICs on the same subnet (two intended for each of my two VMs). I'm trying to achieve the setup that Uthark describes here. But following his guidelines didn't work for me. My eth0 and eth1 did not come up, and "brctl show" showed that br0 didn't have any interfaces (the bond). I assumed it didn't work because he's using 10.4, and this article says there's a recent change in bonding: [I can't post more than one hyperlink per post because I'm a newbie.] I had to use this article to get my interfaces to work at all on the same subnet, which is why I have the post-up lines on some of my interfaces: [I can't post more than one hyperlink per post because I'm a newbie.] I installed ifenslave and ethtool. I also created /etc/modprobe.d/aliases.conf with the following content: alias bond0 bonding options bonding mode=6 miimon=100 downdelay=200 updelay=200 And I included "bonding" in /etc/modules So, after several approaches, here is my latest interfaces file: auto lo iface lo inet loopback auto eth5 iface eth5 inet manual auto br5 iface br5 inet static post-up /sbin/ip rule add from [network].79 lookup 10 post-up /sbin/ip route add table 10 default via [network].1 src [network].79 dev br5 address [network].79 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports eth5 bridge_stp off bridge_fd 0 bridge_maxwait 0 auto eth2 iface eth2 inet manual auto br2 iface br2 inet static post-up /sbin/ip rule add from [network].78 lookup 11 post-up /sbin/ip route add table 11 default via [network].1 src [network].78 dev br2 address [network].78 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports eth2 bridge_stp off bridge_fd 0 bridge_maxwait 0 iface eth0 inet manual iface eth1 inet manual auto bond0 iface bond0 inet static bond_miimon 100 bond_mode balance-alb up /sbin/ifenslave bond0 eth0 eth1 down /sbin/ifenslave -d bond0 eth0 eth1 auto br0 iface br0 inet static address [network].60 netmask 255.255.255.0 network [network].0 broadcast [network].255 gateway [network].1 bridge_ports bond0 eth2, eth5, br2, and br5 all seem to be working fine. The only other thing I could find that looked suspicious is an error regarding bonding in /var/log/messages: kernel: [ 3.828684] bonding: Warning: either miimon or arp_interval and arp_ip_target module parameters must be specified, otherwise bonding will not detect link failures! see bonding.txt for details. even though there is a bond-miimon line in /etc/network/interfaces (if that's what they're talking about). Also, the bond seems to go in and out of promiscuous mode several times on boot: Jan 20 14:19:02 kvmhost kernel: [ 3.902378] device bond0 entered promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902390] device bond0 left promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902393] device bond0 entered promiscuous mode Jan 20 14:19:02 kvmhost kernel: [ 3.902397] device bond0 left promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.998990] device bond0 entered promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999005] device bond0 left promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999008] device bond0 entered promiscuous mode Jan 20 14:19:03 kvmhost kernel: [ 4.999012] device bond0 left promiscuous mode Any advice would be greatly appreciated. It seems that this must be possible, based on other posts, but I can't see what I'm doing wrong. Thanks.

  Read the article

• javascript complex recurrsion [on hold]

  - by Achilles

  Given Below is my data in data array. What i am doing in code below is that from that given data i have to construct json in a special format which i also gave below. //code start here var hierarchy={}; hierarchy.name="Hierarchy"; hierarchy.children=[{"name":"","children":[{"name":"","children":[]}]}]; var countryindex; var flagExist=false; var data = [ {country :"America", city:"Kansas", employe:'Jacob'}, {country :"Pakistan", city:"Lahore", employe:'tahir'}, {country :"Pakistan", city:"Islamabad", employe:'fakhar'} , {country :"Pakistan", city:"Lahore", employe:'bilal'}, {country :"India", city:"d", employe:'ali'} , {country :"Pakistan", city:"Karachi", employe:'eden'}, {country :"America", city:"Kansas", employe:'Jeen'} , {country :"India", city:"Banglore", employe:'PP'} , {country :"India", city:"Banglore", employe:'JJ'} , ]; for(var i=0;i<data.length;i++) { for(var j=0;j<hierarchy.children.length;j++) { //for checking country match if(hierarchy.children[j].name==data[i].country) { countryindex=j; flagExist=true; break; } } if(flagExist)//country match now no need to add new country just add city in it { var cityindex; var cityflag=false; //hierarchy.children[countryindex].children.push({"name":data[i].city,"children":[]}) //if(hierarchy.children[index].children!=undefined) for(var k=0;k< hierarchy.children[countryindex].children.length;k++) { //for checking city match if(hierarchy.children[countryindex].children[k].name==data[i].city) { // hierarchy.children[countryindex].children[k].children.push({"name":data[i].employe}) cityflag=true; cityindex=k; break; } } if(cityflag)//city match now add just empolye at that city index { hierarchy.children[countryindex].children[cityindex].children.push({"name":data[i].employe}); cityflag=false; } else//no city match so add new with employe also as this is new city so its emplye will be 1st { hierarchy.children[countryindex].children.push({"name":data[i].city,children:[{"name":data[i].employe}]}); //same as above //hierarchy.children[countryindex].children[length-1].children.push({"name":data[i].employe}); } flagExist=false; } else{ //no country match adding new country //with city also as this is new city of new country console.log("sparta"); hierarchy.children.push({"name":data[i].country,"children":[{"name":data[i].city,"children":[{"name":data[i].employe}]}]}); // hierarchy.children.children.push({"name":data[i].city,"children":[]}); } //console.log(hierarchy); } hierarchy.children.shift(); var j=JSON.stringify(hierarchy); //code ends here //here is the json which i seccessfully formed from the code { "name":"Hierarchy", "children":[ { "name":"America", "children":[ { "name":"Kansas", "children":[{"name":"Jacob"},{"name":"Jeen"}]}]}, { "name":"Pakistan", "children":[ { "name":"Lahore", "children": [ {"name":"tahir"},{"name":"bilal"}]}, { "name":"Islamabad", "children":[{"name":"fakhar"}]}, { "name":"Karachi", "children":[{"name":"eden"}]}]}, { "name":"India", "children": [ { "name":"d", "children": [ {"name":"ali"}]}, { "name":"Banglore", "children":[{"name":"PP"},{"name":"JJ"}]}]}]} Now the orignal problem is that currently i am solving this problem for data of array of three keys and i have to go for 3 nested loops now i want to optimize this solution so that if data array of object has more than 3 key say 5 {country :"America", state:"NewYork",city:"newYOrk",street:"elm", employe:'Jacob'}, or more than my solution will not work and i cannot decide before how many keys will come so i thought recursion may suit best here. But i am horrible in writing recurrsion and the case is also complex. Can some awesome programmer help me writing recurrsion or suggest some other solution.

  Read the article

• Get Pop Up Notifications for Your RSS Feeds with Feed Notifier

  - by DigitalGeekery

  Are you looking for a way to get updates from your favorite websites right to your desktop?  If so, you’ll want to check out Feed Notifier. This free Windows application runs in the system tray and delivers pop-up notifications to your desktop when your subscribed RSS feeds are updated. Download and install Feed Notifier. (Download link below) When you are finished installing, the Feed Notifier Preferences window will open. Click on the Add… button to add an RSS feed. Copy and paste the Feed URL into the text box and click Next. Choose your polling interval. This is how often your feed will be checked for new items. You can set your polling interval for days, hours, minutes, or even seconds. Click FInish. At your configured interval, Feed Notifier will check your feeds for new items. If new items are present, they will pop up above your system tray.  You’ll get an intro portion of the article. Simply Click the headline in the feed pop up… …to open the full article in your default browser. Setting Preferences Open the preferences of Feed Notifier, by going to Start > All Programs > Feed Notifier, or right clicking on the system tray icon and selecting Preferences. On the Pop-ups tab you can configure the duration in seconds that each article stays displayed on your screen. The default is five seconds. You can also change the size of the display, the theme, and the amount of content displayed.   The Options tab offers additional configurations like article caching and using a proxy server. Filter tab allows you to filter in or out certain content. To add a filter click Add…   … then type in the filter rule. You can even choose to apply it to only certain feeds. Click OK. Feed Notifier will display on the filters tab the number of times the filter is applied. Click OK when finished.   You can scroll though the articles by using the forward and back buttons at the lower left, or use the play / pause buttons to move though the articles in a slideshow-type fashion.   Feed Notifier is nice way to get your updated feeds directly to your desktop in a timely fashion. It’s supports all RSS and Atom feeds and features a clean look and feel with plenty of customizable options. Download Feed Notifier Similar Articles Productive Geek Tips Make Outlook Stop Using Internet Explorer’s RSS FeedsChange Default Feed Reader in FirefoxView Feedburner Subscriber Numbers Even if FeedCount is Not DisplayedSubscribe to RSS Feeds in Chrome with a Single ClickOrganize your RSS Feeds with FeedDemon TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Heaven & Hell Finder Icon Using TrueCrypt to Secure Your Data Quickly Schedule Meetings With NeedtoMeet Share Flickr Photos On Facebook Automatically Are You Blocked On Gtalk? Find out Discover Latest Android Apps On AppBrain

  Read the article

• Move a sphere along the swipe?

  - by gameOne

  I am trying to get a sphere curl based on the swipe. I know this has been asked many times, but still it's yearning to be answered. I have managed to add force on the direction of the swipe and it works near perfect. I also have all the swipe positions stored in a list. Now I would like to know how can the curl be achieved. I believe the the curve in the swipe can be calculated by the Vector dot product If theta is 0, then there is no need to add the swipe. If it is not, then add the curl. Maybe this condition is redundant if I managed to find how to curl the sphere along the swipe position The code that adds the force to sphere based on the swipe direction is as below: using UnityEngine; using System.Collections; using System.Collections.Generic; public class SwipeControl : MonoBehaviour { //First establish some variables private Vector3 fp; //First finger position private Vector3 lp; //Last finger position private Vector3 ip; //some intermediate finger position private float dragDistance; //Distance needed for a swipe to register public float power; private Vector3 footballPos; private bool canShoot = true; private float factor = 40f; private List<Vector3> touchPositions = new List<Vector3>(); void Start(){ dragDistance = Screen.height*20/100; Physics.gravity = new Vector3(0, -20, 0); footballPos = transform.position; } // Update is called once per frame void Update() { //Examine the touch inputs foreach (Touch touch in Input.touches) { /*if (touch.phase == TouchPhase.Began) { fp = touch.position; lp = touch.position; }*/ if (touch.phase == TouchPhase.Moved) { touchPositions.Add(touch.position); } if (touch.phase == TouchPhase.Ended) { fp = touchPositions[0]; lp = touchPositions[touchPositions.Count-1]; ip = touchPositions[touchPositions.Count/2]; //First check if it's actually a drag if (Mathf.Abs(lp.x - fp.x) > dragDistance || Mathf.Abs(lp.y - fp.y) > dragDistance) { //It's a drag //Now check what direction the drag was //First check which axis if (Mathf.Abs(lp.x - fp.x) > Mathf.Abs(lp.y - fp.y)) { //If the horizontal movement is greater than the vertical movement... if ((lp.x>fp.x) && canShoot) //If the movement was to the right) { //Right move float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,10,16))*power); Debug.Log("right "+(lp.x-fp.x));//MOVE RIGHT CODE HERE canShoot = false; //rigidbody.AddForce((new Vector3((lp.x-fp.x)/30,10,16))*power); StartCoroutine(ReturnBall()); } else { //Left move float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,10,16))*power); Debug.Log("left "+(lp.x-fp.x));//MOVE LEFT CODE HERE canShoot = false; //rigidbody.AddForce(new Vector3((lp.x-fp.x)/30,10,16)*power); StartCoroutine(ReturnBall()); } } else { //the vertical movement is greater than the horizontal movement if (lp.y>fp.y) //If the movement was up { //Up move float y = (lp.y-fp.y)/Screen.height*factor; float x = (lp.x - fp.x) / Screen.height * factor; rigidbody.AddForce((new Vector3(x,y,16))*power); Debug.Log("up "+(lp.x-fp.x));//MOVE UP CODE HERE canShoot = false; //rigidbody.AddForce(new Vector3((lp.x-fp.x)/30,10,16)*power); StartCoroutine(ReturnBall()); } else { //Down move Debug.Log("down "+lp+" "+fp);//MOVE DOWN CODE HERE } } } else { //It's a tap Debug.Log("none");//TAP CODE HERE } } } } IEnumerator ReturnBall() { yield return new WaitForSeconds(5.0f); rigidbody.velocity = Vector3.zero; rigidbody.angularVelocity = Vector3.zero; transform.position = footballPos; canShoot =true; isKicked = false; } }

  Read the article

• Math with Timestamp

  - by Knut Vatsendvik

  table.sql { border-width: 1px; border-spacing: 2px; border-style: dashed; border-color: #0023ff; border-collapse: separate; background-color: white; } table.sql th { border-width: 1px; padding: 1px; border-style: none; border-color: gray; background-color: white; -moz-border-radius: 0px 0px 0px 0px; } table.sql td { border-width: 1px; padding: 3px; border-style: none; border-color: gray; background-color: white; -moz-border-radius: 0px 0px 0px 0px; } .sql-keyword { color: #0000cd; background-color: inherit; } .sql-result { color: #458b74; background-color: inherit; } Got this little SQL quiz from a colleague.  How to add or subtract exactly 1 second from a Timestamp?  Sounded simple enough at first blink, but was a bit trickier than expected. If the data type had been a Date, we knew that we could add or subtract days, minutes or seconds using + or – sysdate + 1 to add one day sysdate - (1 / 24) to subtract one hour sysdate + (1 / 86400) to add one second Would the same arithmetic work with Timestamp as with Date? Let’s test it out with the following query SELECT   systimestamp , systimestamp + (1 / 86400) FROM dual; ---------- 03.05.2010 22.11.50,240887 +02:00 03.05.2010 The first result line shows us the system time down to fractions of seconds. The second result line shows the result as Date (as used for date calculation) meaning now that the granularity is reduced down to a second.   By using the PL/SQL dump() function, we can confirm this with the following query SELECT   dump(systimestamp) , dump(systimestamp + (1 / 86400)) FROM dual; ---------- Typ=188 Len=20: 218,7,5,4,8,53,9,0,200,46,89,20,2,0,5,0,0,0,0,0 Typ=13 Len=8: 218,7,5,4,10,53,10,0 Where typ=13 is a runtime representation for Date. So how can we increase the precision to include fractions of second? After investigating it a bit, we found out that the interval data type INTERVAL DAY TO SECOND could be used with the result of addition or subtraction being a Timestamp. Let’s try again our first query again, now using the interval data type. SELECT systimestamp,    systimestamp + INTERVAL '0 00:00:01.0' DAY TO SECOND(1) FROM dual; ---------- 03.05.2010 22.58.32,723659000 +02:00 03.05.2010 22.58.33,723659000 +02:00 Yes, it worked! To finish the story, here is one example showing how to specify an interval of 2 days, 6 hours, 30 minutes, 4 seconds and 111 thousands of a second. INTERVAL ‘2 6:30:4.111’ DAY TO SECOND(3)

  Read the article

• How to write simple code using TDD [migrated]

  - by adeel41

  Me and my colleagues do a small TDD-Kata practice everyday for 30 minutes. For reference this is the link for the excercise http://osherove.com/tdd-kata-1/ The objective is to write better code using TDD. This is my code which I've written public class Calculator { public int Add( string numbers ) { const string commaSeparator = ","; int result = 0; if ( !String.IsNullOrEmpty( numbers ) ) result = numbers.Contains( commaSeparator ) ? AddMultipleNumbers( GetNumbers( commaSeparator, numbers ) ) : ConvertToNumber( numbers ); return result; } private int AddMultipleNumbers( IEnumerable getNumbers ) { return getNumbers.Sum(); } private IEnumerable GetNumbers( string separator, string numbers ) { var allNumbers = numbers .Replace( "\n", separator ) .Split( new string[] { separator }, StringSplitOptions.RemoveEmptyEntries ); return allNumbers.Select( ConvertToNumber ); } private int ConvertToNumber( string number ) { return Convert.ToInt32( number ); } } and the tests for this class are [TestFixture] public class CalculatorTests { private int ArrangeAct( string numbers ) { var calculator = new Calculator(); return calculator.Add( numbers ); } [Test] public void Add_WhenEmptyString_Returns0() { Assert.AreEqual( 0, ArrangeAct( String.Empty ) ); } [Test] [Sequential] public void Add_When1Number_ReturnNumber( [Values( "1", "56" )] string number, [Values( 1, 56 )] int expected ) { Assert.AreEqual( expected, ArrangeAct( number ) ); } [Test] public void Add_When2Numbers_AddThem() { Assert.AreEqual( 3, ArrangeAct( "1,2" ) ); } [Test] public void Add_WhenMoreThan2Numbers_AddThemAll() { Assert.AreEqual( 6, ArrangeAct( "1,2,3" ) ); } [Test] public void Add_SeparatorIsNewLine_AddThem() { Assert.AreEqual( 6, ArrangeAct( @"1 2,3" ) ); } } Now I'll paste code which they have written public class StringCalculator { private const char Separator = ','; public int Add( string numbers ) { const int defaultValue = 0; if ( ShouldReturnDefaultValue( numbers ) ) return defaultValue; return ConvertNumbers( numbers ); } private int ConvertNumbers( string numbers ) { var numberParts = GetNumberParts( numbers ); return numberParts.Select( ConvertSingleNumber ).Sum(); } private string[] GetNumberParts( string numbers ) { return numbers.Split( Separator ); } private int ConvertSingleNumber( string numbers ) { return Convert.ToInt32( numbers ); } private bool ShouldReturnDefaultValue( string numbers ) { return String.IsNullOrEmpty( numbers ); } } and the tests [TestFixture] public class StringCalculatorTests { [Test] public void Add_EmptyString_Returns0() { ArrangeActAndAssert( String.Empty, 0 ); } [Test] [TestCase( "1", 1 )] [TestCase( "2", 2 )] public void Add_WithOneNumber_ReturnsThatNumber( string numberText, int expected ) { ArrangeActAndAssert( numberText, expected ); } [Test] [TestCase( "1,2", 3 )] [TestCase( "3,4", 7 )] public void Add_WithTwoNumbers_ReturnsSum( string numbers, int expected ) { ArrangeActAndAssert( numbers, expected ); } [Test] public void Add_WithThreeNumbers_ReturnsSum() { ArrangeActAndAssert( "1,2,3", 6 ); } private void ArrangeActAndAssert( string numbers, int expected ) { var calculator = new StringCalculator(); var result = calculator.Add( numbers ); Assert.AreEqual( expected, result ); } } Now the question is which one is better? My point here is that we do not need so many small methods initially because StringCalculator has no sub classes and secondly the code itself is so simple that we don't need to break it up too much that it gets confusing after having so many small methods. Their point is that code should read like english and also its better if they can break it up earlier than doing refactoring later and third when they will do refactoring it would be much easier to move these methods quite easily into separate classes. My point of view against is that we never made a decision that code is difficult to understand so why we are breaking it up so early. So I need a third person's opinion to understand which option is much better.

  Read the article

• Restrict number of characters to be typed for af:autoSuggestBehavior

  - by Arunkumar Ramamoorthy

  When using AutoSuggestBehavior for a UI Component, the auto suggest list is displayed as soon as the user starts typing in the field. In this article, we will find how to restrict the autosuggest list to be displayed till the user types in couple of characters. This would be more useful in the low latency networks and also the autosuggest list is bigger. We could display a static message to let the user know that they need to type in more characters to get a list for picking a value from. Final output we would expect is like the below image Lets see how we can implement this. Assuming we have an input text for the users to enter the country name and an autosuggest behavior is added to it. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior /> </af:inputText> Also, assuming we have a VO (we'll name it as CountryView for this example), with a view criteria to filter out the VO based on the bind variable passed. Now, we would generate View Impl class from the java node (including bind variables) and then expose the setter method of the bind variable to client interface. In the View layer, we would create a tree binding for the VO and the method binding for the setter method of the bind variable exposed above, in the pagedef file As we've already added an input text and an autosuggestbehavior for the test, we would not need to build the suggested items for the autosuggest list.Let us add a method in the backing bean to return us List of select items to be bound to the autosuggest list. padding: 5px; background-color: #fbfbfb; min-height: 40px; width: 544px; height: 168px; overflow: auto;"> public List onSuggest(String searchTerm) { ArrayList<SelectItem> selectItems = new ArrayList<SelectItem>(); if(searchTerm.length()>1) { //get access to the binding context and binding container at runtime BindingContext bctx = BindingContext.getCurrent(); BindingContainer bindings = bctx.getCurrentBindingsEntry(); //set the bind variable value that is used to filter the View Object //query of the suggest list. The View Object instance has a View //Criteria assigned OperationBinding setVariable = (OperationBinding) bindings.get("setBind_CountryName"); setVariable.getParamsMap().put("value", searchTerm); setVariable.execute(); //the data in the suggest list is queried by a tree binding. JUCtrlHierBinding hierBinding = (JUCtrlHierBinding) bindings.get("CountryView1"); //re-query the list based on the new bind variable values hierBinding.executeQuery(); //The rangeSet, the list of queries entries, is of type //JUCtrlValueBndingRef. List<JUCtrlValueBindingRef> displayDataList = hierBinding.getRangeSet(); for (JUCtrlValueBindingRef displayData : displayDataList){ Row rw = displayData.getRow(); //populate the SelectItem list selectItems.add(new SelectItem( (String)rw.getAttribute("Name"), (String)rw.getAttribute("Name"))); } } else{ SelectItem a = new SelectItem("","Type in two or more characters..","",true); selectItems.add(a); } return selectItems; } So, what we are doing in the above method is, to check the length of the search term and if it is more than 1 (i.e 2 or more characters), the return the actual suggest list. Otherwise, create a read only select item new SelectItem("","Type in two or more characters..","",true); and add it to the list of suggested items to be displayed. The last parameter for the SelectItem (boolean) is to make it as readOnly, so that users would not be able to select this static message from the displayed list. Finally, bind this method to the input text's autosuggestbehavior's suggestedItems property. <af:inputText label="Country" id="it1"> <af:autoSuggestBehavior suggestedItems="#{AutoSuggestBean.onSuggest}"/> </af:inputText>

  Read the article

• Bug in Delphi XE RegularExpressions Unit

  - by Jan Goyvaerts

  Using the new RegularExpressions unit in Delphi XE, you can iterate over all the matches that a regex finds in a string like this: procedure TForm1.Button1Click(Sender: TObject); var RegEx: TRegEx; Match: TMatch; begin RegEx := TRegex.Create('\w+'); Match := RegEx.Match('One two three four'); while Match.Success do begin Memo1.Lines.Add(Match.Value); Match := Match.NextMatch; end end; Or you could save yourself two lines of code by using the static TRegEx.Match call: procedure TForm1.Button2Click(Sender: TObject); var Match: TMatch; begin Match := TRegEx.Match('One two three four', '\w+'); while Match.Success do begin Memo1.Lines.Add(Match.Value); Match := Match.NextMatch; end end; Unfortunately, due to a bug in the RegularExpressions unit, the static call doesn’t work. Depending on your exact code, you may get fewer matches or blank matches than you should, or your application may crash with an access violation. The RegularExpressions unit defines TRegEx and TMatch as records. That way you don’t have to explicitly create and destroy them. Internally, TRegEx uses TPerlRegEx to do the heavy lifting. TPerlRegEx is a class that needs to be created and destroyed like any other class. If you look at the TRegEx source code, you’ll notice that it uses an interface to destroy the TPerlRegEx instance when TRegEx goes out of scope. Interfaces are reference counted in Delphi, making them usable for automatic memory management. The bug is that TMatch and TGroupCollection also need the TPerlRegEx instance to do their work. TRegEx passes its TPerlRegEx instance to TMatch and TGroupCollection, but it does not pass the instance of the interface that is responsible for destroying TPerlRegEx. This is not a problem in our first code sample. TRegEx stays in scope until we’re done with TMatch. The interface is destroyed when Button1Click exits. In the second code sample, the static TRegEx.Match call creates a local variable of type TRegEx. This local variable goes out of scope when TRegEx.Match returns. Thus the reference count on the interface reaches zero and TPerlRegEx is destroyed when TRegEx.Match returns. When we call MatchAgain the TMatch record tries to use a TPerlRegEx instance that has already been destroyed. To fix this bug, delete or rename the two RegularExpressions.dcu files and copy RegularExpressions.pas into your source code folder. Make these changes to both the TMatch and TGroupCollection records in this unit: Declare FNotifier: IInterface; in the private section. Add the parameter ANotifier: IInterface; to the Create constructor. Assign FNotifier := ANotifier; in the constructor’s implementation. You also need to add the ANotifier: IInterface; parameter to the TMatchCollection.Create constructor. Now try to compile some code that uses the RegularExpressions unit. The compiler will flag all calls to TMatch.Create, TGroupCollection.Create and TMatchCollection.Create. Fix them by adding the ANotifier or FNotifier parameter, depending on whether ARegEx or FRegEx is being passed. With these fixes, the TPerlRegEx instance won’t be destroyed until the last TRegEx, TMatch, or TGroupCollection that uses it goes out of scope or is used with a different regular expression.

  Read the article

• Slow wired internet connection on Realtek RTL8168-8111 (Rev 6)

  - by Mark

  I keep on seeing issues people are having with their wireless. I am having an issue with being wired into my router. I installed Ubuntu 11.10 the other day, on my custom PC. The motherboard I have installed on this PC is an ASUS P8H61-M. The issue I am having is with my speed. I have a dual boot, windows 7 and the new Ubuntu. On my Windows install I am getting test speeds from Speakeasy at 17Mbps and actual downloads around 2-3MB/s. With Ubuntu, I am getting test speeds from Speakeasy at 1.14Mbps and actual downloads around 60KB/s. I have disabled IPv6 and am no using GoogleDNS for my DNS, but it hasn't resolved the issue. I have scanned my router (WRT54GS Linksys) to disable IPv6 connections, and I am not seeing any option for that. I cannot figure out why I am getting such sluggish internet connection. Any help to resolve would be great! I performed an iconfig -a with these results: mark@Mark-ASUS:~$ ifconfig -a eth0 Link encap:Ethernet HWaddr f4:6d:04:d1:2c:4e inet addr:192.168.1.103 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::f66d:4ff:fed1:2c4e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:21888 errors:0 dropped:21888 overruns:0 frame:21888 TX packets:21068 errors:0 dropped:90 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:26348337 (26.3 MB) TX bytes:2217140 (2.2 MB) Interrupt:46 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:7 errors:0 dropped:0 overruns:0 frame:0 TX packets:7 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:952 (952.0 B) TX bytes:952 (952.0 B) My specs are: mark@Mark-ASUS:~$ sudo lspci -nn 04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 06) 06:00.0 PCI bridge [0604]: ASMedia Technology Inc. Device [1b21:1080] (rev 01) udev information: KERNEL[11.351405] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 UDEV [11.363905] add /devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 (net) UDEV_LOG=3 ACTION=add DEVPATH=/devices/pci0000:00/0000:00:1c.2/0000:04:00.0/net/eth0 SUBSYSTEM=net INTERFACE=eth0 IFINDEX=2 SEQNUM=1542 ID_VENDOR_FROM_DATABASE=Realtek Semiconductor Co., Ltd. ID_MODEL_FROM_DATABASE=RTL8111/8168B PCI Express Gigabit Ethernet controller ID_BUS=pci ID_VENDOR_ID=0x10ec ID_MODEL_ID=0x8168 ID_MM_CANDIDATE=1 dmesg information: [ 2.855982] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 2.856366] r8169 0000:04:00.0: eth0: RTL8168b/8111b at 0xffffc9000064c000, f4:6d:04:d1:2c:4e, XID 0c900800 IRQ 46 [ 12.540956] r8169 0000:04:00.0: eth0: link down [ 12.540961] r8169 0000:04:00.0: eth0: link down [ 12.541173] ADDRCONF(NETDEV_UP): eth0: link is not ready I took out a lot of information that did not pertain to eth0, because the previous edits wouldn't save. If I need any more information, let me know. I would love to get this resolved. The other issue I am noticing is sometimes my connection disconnects all together, for about a minute, then it reconnects.

  Read the article

• Question on the implementation of my Entity System

  - by miguel.martin

  I am currently creating an Entity System, in C++, it is almost completed (I have all the code there, I just have to add a few things and test it). The only thing is, I can't figure out how to implement some features. This Entity System is based off a bit from the Artemis framework, however it is different. I'm not sure if I'll be able to type this out the way my head processing it. I'm going to basically ask whether I should do something over something else. Okay, now I'll give a little detail on my Entity System itself. Here are the basic classes that my Entity System uses to actually work: Entity - An Id (and some methods to add/remove/get/etc Components) Component - An empty abstract class ComponentManager - Manages ALL components for ALL entities within a Scene EntitySystem - Processes entities with specific components Aspect - The class that is used to help determine what Components an Entity must contain so a specific EntitySystem can process it EntitySystemManager - Manages all EntitySystems within a Scene EntityManager - Manages entities (i.e. holds all Entities, used to determine whether an Entity has been changed, enables/disables them, etc.) EntityFactory - Creates (and destroys) entities and assigns an ID to them Scene - Contains an EntityManager, EntityFactory, EntitySystemManager and ComponentManager. Has functions to update and initialise the scene. Now in order for an EntitySystem to efficiently know when to check if an Entity is valid for processing (so I can add it to a specific EntitySystem), it must recieve a message from the EntityManager (after a call of activate(Entity& e)). Similarly the EntityManager must know when an Entity is destroyed from the EntityFactory in the Scene, and also the ComponentManager must know when an Entity is created AND destroyed. I do have a Listener/Observer pattern implemented at the moment, but with this pattern I may remove a Listener (which is this case is dependent on the method being called). I mainly have this implemented for specific things related to a game, i.e. Teams, Tagging of entities, etc. So... I was thinking maybe I should call a private method (using friend classes) to send out when an Entity has been activated, deleted, etc. i.e. taken from my EntityFactory void EntityFactory::killEntity(Entity& e) { // if the entity doesn't exsist in the entity manager within the scene if(!getScene()->getEntityManager().doesExsist(e)) { return; // go back to the caller! (should throw an exception or something..) } // tell the ComponentManager and the EntityManager that we killed an Entity getScene()->getComponentManager().doOnEntityWillDie(e); getScene()->getEntityManager().doOnEntityWillDie(e); // notify the listners for(Mouth::iterator i = getMouth().begin(); i != getMouth().end(); ++i) { (*i)->onEntityWillDie(*this, e); } _idPool.addId(e.getId()); // add the ID to the pool delete &e; // delete the entity } As you can see on the lines where I am telling the ComponentManager and the EntityManager that an Entity will die, I am calling a method to make sure it handles it appropriately. Now I realise I could do this without calling it explicitly, with the help of that for loop notifying all listener objects connected to the EntityFactory's Mouth (an object used to tell listeners that there's an event), however is this a good idea (good design, or what)? I've gone over the PROS and CONS, I just can't decide what I want to do. Calling Explicitly: PROS Faster? Since these functions are explicitly called, they can't be "removed" CONS Not flexible Bad design? (friend functions) Calling through Listener objects (i.e. ComponentManager/EntityManager inherits from a EntityFactoryListener) PROS More Flexible? Better Design? CONS Slower? (virtual functions) Listeners can be removed, i.e. may be removed and not get called again during the program, which could cause in a crash. P.S. If you wish to view my current source code, I am hosting it on BitBucket.

  Read the article

• Best Practices - Core allocation

  - by jsavit

  This post is one of a series of "best practices" notes for Oracle VM Server for SPARC (also called Logical Domains) Introduction SPARC T-series servers currently have up to 4 CPU sockets, each of which has up to 8 or (on SPARC T3) 16 CPU cores, while each CPU core has 8 threads, for a maximum of 512 dispatchable CPUs. The defining feature of Oracle VM Server for SPARC is that each domain is assigned CPU threads or cores for its exclusive use. This avoids the overhead of software-based time-slicing and emulation (or binary rewriting) of system state-changing privileged instructions used in traditional hypervisors. To create a domain, administrators specify either the number of CPU threads or cores that the domain will own, as well as its memory and I/O resources. When CPU resources are assigned at the individual thread level, the logical domains constraint manager attempts to assign threads from the same cores to a domain, and avoid "split core" situations where the same CPU core is used by multiple domains. Sometimes this is unavoidable, especially when domains are allocated and deallocated CPUs in small increments. Why split cores can matter Split core allocations can silenty reduce performance because multiple domains with different address spaces and memory contents are sharing the core's Level 1 cache (L1$). This is called false cache sharing since even identical memory addresses from different domains must point to different locations in RAM. The effect of this is increased contention for the cache, and higher memory latency for each domain using that core. The degree of performance impact can be widely variable. For applications with very small memory working sets, and with I/O bound or low-CPU utilization workloads, it may not matter at all: all machines wait for work at the same speed. If the domains have substantial workloads, or are critical to performance then this can have an important impact: This blog entry was inspired by a customer issue in which one CPU core was split among 3 domains, one of which was the control and service domain. The reported problem was increased I/O latency in guest domains, but the root cause might be higher latency servicing the I/O requests due to the control domain being slowed down. What to do about it Split core situations are easily avoided. In most cases the logical domain constraint manager will avoid it without any administrative action, but it can be entirely prevented by doing one of the several actions: Assign virtual CPUs in multiples of 8 - the number of threads per core. For example: ldm set-vcpu 8 mydomain or ldm add-vcpu 24 mydomain. Each domain will then be allocated on a core boundary. Use the whole core constraint when assigning CPU resources. This allocates CPUs in increments of entire cores instead of virtual CPU threads. The equivalent of the above commands would be ldm set-core 1 mydomain or ldm add-core 3 mydomain. Older syntax does the same thing by adding the -c flag to the add-vcpu, rm-vcpu and set-vcpu commands, but the new syntax is recommended. When whole core allocation is used an attempt to add cores to a domain fails if there aren't enough completely empty cores to satisfy the request. See https://blogs.oracle.com/sharakan/entry/oracle_vm_server_for_sparc4 for an excellent article on this topic by Eric Sharakan. Don't obsess: - if the workloads have minimal CPU requirements and don't need anywhere near a full CPU core, then don't worry about it. If you have low utilization workloads being consolidated from older machines onto a current T-series, then there's no need to worry about this or to assign an entire core to domains that will never use that much capacity. In any case, make sure the most important domains have their own CPU cores, in particular the control domain and any I/O or service domain, and of course any important guests. Summary Split core CPU allocation to domains can potentially have an impact on performance, but the logical domains manager tends to prevent this situation, and it can be completely and simply avoided by allocating virtual CPUs on core boundaries.

  Read the article

• Converting a GameObject method call from UnityScript to C#

  - by Crims0n_

  Here is the UnityScript implementation of the method i use to generate a randomly tiled background, the problem i'm having relates to how to translate the call to the newTile method in c#, so far i've had no luck fiddling... can anyone point me in the correct direction? Thanks #pragma strict import System.Collections.Generic; var mapSizeX : int; var mapSizeY : int; var xOffset : float; var yOffset : float; var tilePrefab : GameObject; var tilePrefab2 : GameObject; var tiles : List.<Transform> = new List.<Transform>(); function Start () { var i : int = 0; var xIndex : int = 0; var yIndex : int = 0; xOffset = 2.69; yOffset = -1.97; while(yIndex < mapSizeY){ xIndex = 0; while(xIndex < mapSizeX){ var z = Random.Range(0, 5); if (z > 2) { var newTile : GameObject = Instantiate (tilePrefab, Vector3(xIndex*0.64 - (xOffset * (mapSizeX/10)), yIndex*-0.64 - (yOffset * (mapSizeY/10)), 0), Quaternion.identity); tiles.Add(newTile.transform); newTile.transform.parent = transform; newTile.transform.name = "tile_"+i; i++; xIndex++; } if (z < 2) { var newTile2 : GameObject = Instantiate (tilePrefab2, Vector3(xIndex*0.64 - (xOffset * (mapSizeX/10)), yIndex*-0.64 - (yOffset * (mapSizeY/10)), 0), Quaternion.identity); tiles.Add(newTile2.transform); newTile2.transform.parent = transform; newTile2.transform.name = "Ztile_"+i; i++; xIndex++; } } yIndex++; } } C# Version [Fixed] using UnityEngine; using System.Collections; public class LevelGen : MonoBehaviour { public int mapSizeX; public int mapSizeY; public float xOffset; public float yOffset; public GameObject tilePrefab; public GameObject tilePrefab2; int i; public System.Collections.Generic.List<Transform> tiles = new System.Collections.Generic.List<Transform>(); // Use this for initialization void Start () { int i = 0; int xIndex = 0; int yIndex = 0; xOffset = 1.58f; yOffset = -1.156f; while (yIndex < mapSizeY) { xIndex = 0; while(xIndex < mapSizeX) { int z = Random.Range(0, 5); if (z > 5) { GameObject newTile = (GameObject)Instantiate(tilePrefab, new Vector3(xIndex*0.64f - (xOffset * (mapSizeX/10.0f)), yIndex*-0.64f - (yOffset * (mapSizeY/10.0f)), 0), Quaternion.identity); tiles.Add(newTile.transform); newTile.transform.parent = transform; newTile.transform.name = "tile_"+i; i++; xIndex++; } if (z < 5) { GameObject newTile2 = (GameObject)Instantiate(tilePrefab, new Vector3(xIndex*0.64f - (xOffset * (mapSizeX/10.0f)), yIndex*-0.64f - (yOffset * (mapSizeY/10.0f)), 0), Quaternion.identity); tiles.Add(newTile2.transform); newTile2.transform.parent = transform; newTile2.transform.name = "tile2_"+i; i++; xIndex++; } } yIndex++; } } // Update is called once per frame void Update () { } }

  Read the article

• ovs-vsctl: "eth0" is not a valid UUID

  - by Przemek Lach

  I'm trying to setup an open v-switch inside my Ubuntu 12.04 Server VM. I have created three interfaces for this VM and I want to create a port mirror inside of the VM using these there interfaces and open v-switch. There are three Host-Only Adapters: eth0, eth1, eth2. The idea is that three other VM's will be connected to these adapters. One of these VM's will stream UDP video to eth0 and I want the vswitch'd VM to mirror those packets from eth0 onto eth1 and eth2. Each of the VM's connected to eth1 and eth2 will get the same video stream. I performed the following steps to install open v-switch: $ apt-get install python-simplejson python-qt4 python-twisted-conch automake autoconf gcc uml-utilities libtool build-essential $ apt-get install build-essential autoconf automake pkg-config $ wget http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ tar xf http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ cd http://openvswitch.org/releases/openvswitch-1.7.1.tar.gz $ apt-get install libssl-dev iproute tcpdump linux-headers-`uname -r` $ ./boot.sh $ ./configure - -with-linux=/lib/modules/`uname -r`/build $ make $ sudo make install After installation I configured as follows: $ insmod datapath/linux/openvswitch.ko $ sudo touch /usr/local/etc/ovs-vswitchd.conf $ mkdir -p /usr/local/etc/openvswitch $ ovsdb-tool create /usr/local/etc/openvswitch/conf.db Then I started the server: $ ovsdb-server /usr/local/etc/openvswitch/conf.db \ --remote=punix:/usr/local/var/run/openvswitch/db.sock \ --remote=db:Open_vSwitch,manager_options \ --private-key=db:SSL,private_key \ --certificate=db:SSL,certificate \ --bootstrap-ca-cert=db:SSL,ca_cert --pidfile --detach --log-file $ ovs-vsctl –no-wait init (run only once) $ ovs-vswitchd --pidfile --detach The above steps I got from this tutorial and it all worked fine. I then proceeded to add a port mirror based on the open v-switch documentation under Port Mirroring. I successfully completed the following commands: $ ovs-vsctl add-br br0 $ ovs-vsctl add-port br0 eth0 $ ovs-vsctl add-port br0 eth1 $ ovs-vsctl add-port br0 eth2 $ ifconfig eth0 promisc up $ ifconfig eth1 promisc up $ ifconfig eth2 promisc up At this point when I run ovs-vsctl show I get the following: 75bda8c2-b870-438b-9115-e36288ea1cd8 Bridge "br0" Port "br0" Interface "br0" type: internal Port "eth0" Interface "eth0" Port "eth2" Interface "eth2" Port "eth1" Interface "eth1" And when I run ifconfig I get the following: eth0 Link encap:Ethernet HWaddr 08:00:27:9f:51:ca inet6 addr: fe80::a00:27ff:fe9f:51ca/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth1 Link encap:Ethernet HWaddr 08:00:27:53:02:d4 inet6 addr: fe80::a00:27ff:fe53:2d4/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth2 Link encap:Ethernet HWaddr 08:00:27:cb:a5:93 inet6 addr: fe80::a00:27ff:fecb:a593/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:17 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1494 (1.4 KB) TX bytes:468 (468.0 B) eth3 Link encap:Ethernet HWaddr 08:00:27:df:bb:d8 inet addr:192.168.1.139 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::a00:27ff:fedf:bbd8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2211 errors:0 dropped:0 overruns:0 frame:0 TX packets:1196 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:182987 (182.9 KB) TX bytes:125441 (125.4 KB) NOTE: I use eth3 as a bridge adapter for SSH'ing into the VM. So now, I think I've done everything correctly but when I try to create the bridge using the following command: $ ovs-vsctl -- set Bridge br0 mirrors=@m -- --id=@eth0 get Port eth0 -- --id=@eth1 get Port eth1 -- --id=@m create Mirror name=app1Mirror select-dst-port=eth0 select-src-port=@eth0 output-port=@eth1,eth2 I get the following error: ovs-vsctl: "eth0" is not a valid UUID I don't understand why it's not able to find the interfaces?

  Read the article

• Getting Audio from a Zone

  - by bleonard

  Now that I have Firefox and Java Web Start running from a zone, the last piece of the puzzle was audio (essential because most Flash content is accompanied by sound).  In the global zone there's a nice little utility called audiotest for testing your sound: bleonard@solaris:~$ audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 47727.00 Hz (-0.57%)> *** All tests completed OK *** Of course, before you can try audiotest in a zone, it must be installed: root@myzone:~# pkg install audio-utilities Packages to install: 1 Create boot environment: No DOWNLOAD PKGS FILES XFER (MB) Completed 1/1 6/6 0.4/0.4 PHASE ACTIONS Install Phase 20/20 PHASE ITEMS Package State Update Phase 1/1 Image State Update Phase 2/2 However, we'll need to do more than just install audiotest: root@myzone:~# audiotest /dev/mixer: No such file or directory The device file is missing from /dev. The audio devices also need to be added to the zone. For this we modify the zone configuration as follows: bleonard@solaris:~$ sudo zonecfg -z myzone Password: zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/audio* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sound/* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/mixer* zonecfg:myzone:device> end zonecfg:myzone> add device zonecfg:myzone:device> set match=/dev/sndstat zonecfg:myzone:device> end zonecfg:myzone> verify zonecfg:myzone> exit Then reboot the zone: bleonard@solaris:~$ sudo zoneadm -z myzone reboot After which, audiotest should work: root@myzone:~# audiotest Sound subsystem and version: SunOS Audio 4.0 (0x00040003) Platform: SunOS 5.11 snv_151a i86pc *** Scanning sound adapter #1 *** /dev/sound/audio810:0dsp (audio engine 0): audio810#0 - Performing audio playback test... <left> ................OK <right> ...............OK <stereo> ..............OK <measured sample rate 48208.00 Hz (0.43%)> *** All tests completed OK *** You can also examine /dev/sndstat for additional information: root@myzone:~# cat /dev/sndstat SunOS Audio Framework Audio Devices: 0: audio810#0 Intel AC'97, ICH (DUPLEX) Mixers: 0: audio810#0 Intel AC'97, ICH AC'97 codec: SigmaTel STAC9700 However, when testing the sound from Firefox (from a user account other than root), such as this recent Flash presentation on Solaris availability, you may still be disappointed. This is simply a permissions problem, as the devices only have read and write permissions for root: root@myzone:~# ls -l /dev/audio* crw------- 1 root root 99, 3 Jul 1 10:21 /dev/audio crw------- 1 root root 99, 4 Jul 1 10:21 /dev/audioctl To address this: root@myzone:~# chmod 777 /dev/audio* root@myzone:~# chmod 777 /dev/sound/* And you should be all set.

  Read the article

• Searching for context in Silverlight applications

  - by PeterTweed

  A common behavior in business applications that have developed through the ages is for a user to be able to get information or execute commands in relation to some information/function displayed by right clicking the object in question and popping up a context menu that offers relevant options to choose. The Silverlight Toolkit April 2010 release introduced the context menu object.  This can be added to other UI objects and display options for the user to choose.  The menu items can be enabled or disabled as per your application logic and icons can be added to the menu items to add visual effect.  This post will walk you through how to use the context menu object from the Silverlight Toolkit. Steps: 1. Create a new Silverlight 4 application 2. Copy the following namespace definition to the user control object of the MainPage.xaml file: xmlns:my="clr-namespace:System.Windows.Controls;assembly=System.Windows.Controls.Input.Toolkit"   3. Copy the following XAML into the LayoutRoot grid in MainPage.xaml:          <Border CornerRadius="15" Background="Blue" Width="400" Height="100">             <TextBlock Foreground="White" FontSize="20" Text="Context Menu In This Border...." HorizontalAlignment="Center" VerticalAlignment="Center" >             </TextBlock>             <my:ContextMenuService.ContextMenu>                 <my:ContextMenu >                     <my:MenuItem                 Header="Copy"                 Click="CopyMenuItem_Click" Name="copyMenuItem">                         <my:MenuItem.Icon>                             <Image Source="copy-icon-small.png"/>                         </my:MenuItem.Icon>                     </my:MenuItem>                     <my:Separator/>                     <my:MenuItem Name="pasteMenuItem"                 Header="Paste"                 Click="PasteMenuItem_Click">                         <my:MenuItem.Icon>                             <Image Source="paste-icon-small.png"/>                         </my:MenuItem.Icon>                     </my:MenuItem>                 </my:ContextMenu>             </my:ContextMenuService.ContextMenu>         </Border>   The above code associates a context menu with two menu items and a separator between them to the border object.  The menu items has icons associated with them to add visual appeal.  The menu items have click event handlers that will be added in the MainPage.xaml.cs code behind in a later step. 4. Add two icon sized images to the ClientBin directory of the web project hosting the Silverlight application, named copy-icon-small.png and paste-icon-small.jpg respectively.  I used copy and paste icons as the names suggest. 5. Add the following code to the class in MainPage.xaml.cs file:         private void CopyMenuItem_Click(object sender, RoutedEventArgs e)         {             MessageBox.Show("Copy selected");         }           private void PasteMenuItem_Click(object sender, RoutedEventArgs e)         {             MessageBox.Show("Paste selected");         }   This code adds the event handlers for the menu items defined in step 3. 6. Run the application, right click on the border and select a menu option and see the appropriate message box displayed. Congratulations it’s that easy!   Take the Slalom Challenge at www.slalomchallenge.com!

  Read the article

• Using data input from pop-up page to current with partial refresh

  - by dpDesignz

  I'm building a product editor webpage using visual C#. I've got an image uploader popping up using fancybox, and I need to get the info from my fancybox once submitted to go back to the first page without clearing any info. I know I need to use ajax but how would I do it? <%@ Page Language="C#" AutoEventWireup="true" CodeFile="uploader.aspx.cs" Inherits="uploader" %> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head id="Head1" runat="server"> <title></title> </head> <body style="width:350px; height:70px;"> <form id="form1" runat="server"> <asp:ScriptManager ID="ScriptManager1" runat="server"> </asp:ScriptManager> <div> <div style="width:312px; height:20px; background-color:Gray; color:White; padding-left:8px; margin-bottom:4px; text-transform:uppercase; font-weight:bold;">Uploader</div> <asp:FileUpload id="fileUp" runat="server" /> <asp:Button runat="server" id="UploadButton" text="Upload" onclick="UploadButton_Click" /> <br /><asp:Label ID="txtFile" runat="server"></asp:Label> <div style="width:312px; height:15px; background-color:#CCCCCC; color:#4d4d4d; padding-right:8px; margin-top:4px; text-align:right; font-size:x-small;">Click upload to insert your image into your product</div> </div> </form> </body> </html> CS so far using System; using System.Collections.Generic; using System.Linq; using System.Web; using System.Web.Configuration; // Add to page using System.Web.UI; using System.Web.UI.WebControls; using System.Data; // Add to the page using System.Data.SqlClient; // Add to the page using System.Text; // Add to Page public partial class uploader : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void UploadButton_Click(object sender, EventArgs e) { if (fileUp.HasFile) try { fileUp.SaveAs("\\\\london\\users\\DP006\\Websites\\images\\" + fileUp.FileName); string imagePath = fileUp.PostedFile.FileName; } catch (Exception ex) { txtFile.Text = "ERROR: " + ex.Message.ToString(); } finally { } else { txtFile.Text = "You have not specified a file."; } } }

  Read the article

• How to place rooms proceduraly (rule based) on in a game word

  - by gardian06

  I am trying to design the algorithm for my level generation which is a rule driven system. I have created all the rules for the system. I have taken care to insure that all rooms make sense in a grid type setup. for example: these rooms could make this configuration The logic flow code that I have so far Door{ Vector3 position; POD orient; // 5 possible values (up is not an option) bool Open; } Room{ String roomRule; Vector3 roomPos; Vector3 dimensions; POD roomOrient; // 4 possible values List doors<Door>; } LevelManager{ float scale = 18f; List usedRooms<Room>; List openDoors<Door> bool Grid[][][]; Room CreateRoom(String rule, Vector3 position, POD Orient){ place recieved values based on rule fill in other data } Vector3 getDimenstions(String rule){ return dimensions of the room } RotateRoom(POD rotateAmount){ rotate all items in the room } MoveRoom(Room toBeMoved, POD orientataion, float distance){ move the position of the room based on inputs } GenerateMap(Vector3 size, Vector3 start, Vector3 end){ Grid = array[size.y][size.x][size.z]; Room floatingRoom; floatingRoom = Room.CreateRoom(S01, start, rand(4)); usedRooms.Add(floatingRoom); for each Door in floatingRoom.doors{ openDoors.Add(door); } // fill used grid spaces floatingRoom = Room.CreateRoom(S02, end, rand(4); usedRooms.Add(floatingRoom); for each Door in floatingRoom.doors{ openDoors.Add(door); } Vector3 nRoomLocation; Door workingDoor; string workingRoom; // fill used grid spaces // pick random door on the openDoors list workingDoor = /*randomDoor*/ // get a random rule nRoomLocation = workingDoor.position; // then I'm lost } } I know that I have to make sure for convergence (namely the end is reachable), and to do this until there are no more doors on the openDoors list. right now I am simply trying to get this to work in 2D (there are rules that introduce 3D), but I am working on a presumption that a rigorous algorithm can be trivially extended to 3D. EDIT: my thought pattern so far is to take an existing open door and then pick a random room (restrictions can be put in later) place that room's center at the doors location move the room in the direction of the doors orientation half the rooms dimension w/respect to that axis then test against the 3D array to see if all the grid points are open, or have been used, or if there is even space to put the room (caseEdge) if caseEdge (which can also occur in between rooms) then put the door on a toBeClosed list, and remove it from the open list (placing a wall or something there). then to do some kind of test that both the start, and the goal are connected, and reachable from each other (each room has nodes for AI, but I don't want to "have" to pull those out to accomplish this). but this logic has the problem for say the U, or L shaped rooms in my example, and then I also have a problem conceptually if the room needs to be rotated.

  Read the article

• F# Objects &ndash; Integration with the other .Net Languages &ndash; Part 2

  - by MarkPearl

  So in part one of my posting I covered the real basics of object creation. Today I will hopefully dig a little deeper… My expert F# book brings up an interesting point – properties in F# are just syntactic sugar for method calls. This makes sense… for instance assume I had the following object with the property exposed called Firstname. type Person(Firstname : string, Lastname : string) = member v.Firstname = Firstname I could extend the Firstname property with the following code and everything would be hunky dory… type Person(Firstname : string, Lastname : string) = member v.Firstname = Console.WriteLine("Side Effect") Firstname   All that this would do is each time I use the property Firstname, I would see the side effect printed to the screen saying “Side Effect”. Member methods have a very similar look & feel to properties, in fact the only difference really is that you declare that parameters are being passed in. type Person(Firstname : string, Lastname : string) = member v.FullName(middleName) = Firstname + " " + middleName + " " + Lastname   In the code above, FullName requires the parameter middleName, and if viewed from another project in C# would show as a method and not a property. Precomputation Optimizations Okay, so something that is obvious once you think of it but that poses an interesting side effect of mutable value holders is pre-computation of results. All it is, is a slight difference in code but can result in quite a huge saving in performance. Basically pre-computation means you would not need to compute a value every time a method is called – but could perform the computation at the creation of the object (I hope I have got it right). In a way I battle to differentiate this from lazy evaluation but I will show an example to explain the principle. Let me try and show an example to illustrate the principle… assume the following F# module namespace myNamespace open System module myMod = let Add val1 val2 = Console.WriteLine("Compute") val1 + val2 type MathPrecompute(val1 : int, val2 : int) = let precomputedsum = Add val1 val2 member v.Sum = precomputedsum type MathNormalCompute(val1 : int, val2 : int) = member v.Sum = Add val1 val2 Now assume you have a C# console app that makes use of the objects with code similar to the following… using System; using myNamespace; namespace CSharpTest { class Program { static void Main(string[] args) { Console.WriteLine("Constructing Objects"); var myObj1 = new myMod.MathNormalCompute(10, 11); var myObj2 = new myMod.MathPrecompute(10, 11); Console.WriteLine(""); Console.WriteLine("Normal Compute Sum..."); Console.WriteLine(myObj1.Sum); Console.WriteLine(myObj1.Sum); Console.WriteLine(myObj1.Sum); Console.WriteLine(""); Console.WriteLine("Pre Compute Sum..."); Console.WriteLine(myObj2.Sum); Console.WriteLine(myObj2.Sum); Console.WriteLine(myObj2.Sum); Console.ReadKey(); } } } The output when running the console application would be as follows…. You will notice with the normal compute object that the system would call the Add function every time the method was called. With the Precompute object it only called the compute method when the object was created. Subtle, but something that could lead to major performance benefits. So… this post has gone off in a slight tangent but still related to F# objects.

  Read the article

• why my code still cannot connect with database? [closed]

  - by Wen Teng

  package com.mems.travis; import java.util.ArrayList; import java.util.List; import org.apache.http.NameValuePair; import org.apache.http.message.BasicNameValuePair; import org.json.JSONObject; import android.app.Activity; import android.app.AlertDialog; import android.content.DialogInterface; import android.content.Intent; import android.os.AsyncTask; import android.os.Bundle; import android.util.Log; import android.view.View; import android.widget.Button; import android.widget.EditText; import android.widget.RadioButton; public class UserRegister extends Activity { JSONParser jsonParser = new JSONParser(); EditText inputName; EditText inputUsername; EditText inputEmail; EditText inputPassword; RadioButton button1; RadioButton button2; Button button3; int success = 0; // url to create new product private static String url_register_user = "http://192.168.1.100/MEMS/add_user.php"; // JSON Node names private static final String TAG_SUCCESS = "success"; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.activity_user_register); // Edit Text inputName = (EditText) findViewById(R.id.nameTextBox); inputUsername = (EditText) findViewById(R.id.usernameTextBox); inputEmail = (EditText) findViewById(R.id.emailTextBox); inputPassword = (EditText) findViewById(R.id.pwTextBox); // Create button //RadioButton button1 = (RadioButton) findViewById(R.id.studButton); // RadioButton button2 = (RadioButton) findViewById(R.id.shopownerButton); Button button3 = (Button) findViewById(R.id.regSubmitButton); // button click event button3.setOnClickListener(new View.OnClickListener() { public void onClick(View view) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); if (name.contentEquals("")||username.contentEquals("")||email.contentEquals("")||password.contentEquals("")) { AlertDialog.Builder builder = new AlertDialog.Builder(UserRegister.this); // 2. Chain together various setter methods to set the dialog characteristics builder.setMessage(R.string.nullAlert) .setTitle(R.string.alertTitle); builder.setPositiveButton(R.string.ok, new DialogInterface.OnClickListener() { public void onClick(DialogInterface dialog, int id) { // User clicked OK button } }); // 3. Get the AlertDialog from create() AlertDialog dialog = builder.show(); } else { new RegisterNewUser().execute(); } } }); } class RegisterNewUser extends AsyncTask<String, String, String>{ protected String doInBackground(String... args) { String name = inputName.getText().toString(); String username = inputUsername.getText().toString(); String email = inputEmail.getText().toString(); String password = inputPassword.getText().toString(); // Building Parameters List<NameValuePair> params = new ArrayList<NameValuePair>(); params.add(new BasicNameValuePair("name", name)); params.add(new BasicNameValuePair("username", username)); params.add(new BasicNameValuePair("email", email)); params.add(new BasicNameValuePair("password", password)); // getting JSON Object // Note that create product url accepts POST method JSONObject json = jsonParser.makeHttpRequest(url_register_user, "GET", params); // check log cat for response Log.d("Send Notification", json.toString()); try { int success = json.getInt(TAG_SUCCESS); if (success == 1) { // successfully created product Intent i = new Intent(getApplicationContext(), StudentLogin.class); startActivity(i); finish(); } else { // failed to register } } catch (Exception e) { e.printStackTrace(); } return null; } } }

  Read the article

• Create Custom Speech Bubbles in Silverlight.

  - by mbcrump

  I had a reader email me the following question: “How do you create Speech Bubbles in Silverlight/WPF without adding any extra .dlls? Right off the bat, I know at least two ways to create the speech bubbles that look just like the ones in comic books. Using the Callout Shapes included with Blend 4. Using the free 3rd party control named FreeBubbles (I used this before Blend 4). Unfortunately, we cannot use either of these as they will both add extra .dll’s to the project. So why wouldn’t you want to use one of those? I can think of a few reasons: You do not want to increase the size of your .XAP by including extra .dll’s. You do not have Expression Blend or the license to the use the .dll’s. You want a custom Speech Bubble that is not included in the four “Callout” Controls with Blend. Instead of using one of these methods, we will create a Speech Bubble in Blend 4 using Path element and a TextBlock. Before we get started, lets look at the Callout Shapes included with Blend 4. Using Blend 4 you can simply drag/drop these controls onto your Silverlight application and you are ready to go. We can create all of these Speech Bubbles and even some of the modern bubbles used in recent comic books. Lets get started. Start up Expression Blend 4 and select the Pen Tool. On the Art Board, start connecting the dots like I did below. You can add a color if you wish. …keep going …complete Let’s go ahead and add some text to the Speech Bubble. Drag a TextBlock from the Panel and put it directly inside the Speech Bubble. Go ahead and set the TextAlignment to Center for the TextBlock. and give it some text. At this point, you could go ahead and create a user control if you want to reuse the Speech Bubble you created. Select both the Path and the TextBlock by clicking then while holding down CTRL and then Right Click them. Select Make Into User Control. Give it a name and then Build your project. Lets create another one using the Ellipse for the older comic book style of Speech Bubbles. Drag an Ellipse to the Artboard and give it a color. Now, grab the Pen and drag a triangle like I did below. Simply drag it over a corner of the Ellipse. Select Combine then Unite and you will have a Path. At this point, you can go ahead and add a TextBlock like we did earlier. Lets go ahead and create a rounded rectangle one by adding a Rectangle to the Artboard. Go ahead and set the RadiuX and RadiusY to 25 to give it rounded edges. Let’s create another path and drag it right on top of our rounded rectangle like we did earlier. …looking good Select Combine then Unite and you will have a Path. At this point, you can go ahead and add a TextBlock like we did earlier. So let’s look at what we’ve created today using the path element and TextBlock. As you can tell, it required more work but meets the requirements. This was actually fun to do and I encourage anyone that visits my blog to send in request like this.  Subscribe to my feed

  Read the article

• jqGrid (Delete row) - How to send additional POST data???

  - by ronanray

  Hi experts, I'm having problem with jqGrid delete mechanism as it only send "oper" and "id" parameters in form of POST data (id is the primary key of the table). The problem is, I need to delete a row based on the id and another column value, let's say user_id. How to add this user_id to the POST data??? I can summarize the issue as the following: How to get the cell value (user_id) of the selected row? AND, how to add that user_id to the POST data so it can be retrieved from the code behind where the actual delete process takes place. Sample codes: jQuery("#tags").jqGrid({ url: "subgrid.process.php, editurl: "subgrid.process.php?, datatype: "json", mtype: "POST", colNames:['id','user_id','status_type_id'], colModel:[{name:'id', index:'id', width:100, editable:true}, {name:'user_id', index:'user_id', width:200, editable:true}, {name:'status_type_id', index:'status_type_id', width:200} ], pager: '#pagernav2', rowNum:10, rowList:[10,20,30,40,50,100], sortname: 'id', sortorder: "asc", caption: "Test", height: 200 }); jQuery("#tags").jqGrid('navGrid','#pagernav2', {add:true,edit:false,del:true,search:false}, {}, {mtype:"POST",closeAfterAdd:true,reloadAfterSubmit:true}, // add options {mtype:"POST",reloadAfterSubmit:true}, // del options {} // search options ); Help....

  Read the article

• Visual Studio 2008 doesn't create *.refresh files for external DLL references... what am I missing?

  - by Cory Larson

  Hi all-- I've got a question about something that's just been irritating me. A colleague and I are building a support framework for our current client that we want to reference in other projects. The DLL we want as a reference in our project would be an external reference. We're adding it by doing "Add Reference...", then browsing to the location of the .dll. What I want Visual Studio to do is only add the .xml, .pdb, and a .dll.refresh file, but instead it copies the actual .dll (and .xml and .pdb) into the bin. When we rebuild the framework project, the other project that uses its .dll gets all out of whack until we drop and re-add the reference. Everything I've read online says that VS2008 is supposed to create the .dll.refresh files for you, but it never does. Any ideas? Am I missing something or doing something wrong? At this point I'm ready to add a pre-build event to simply copy the framework .dll into my bin, but the .refresh file seems like less of a hassle if it would just work. Thanks, Cory

  Read the article

• What is Causing This Memory Leak in Delphi?

  - by lkessler

  I just can't figure out this memory leak that EurekaLog is reporting for my program. I'm using Delphi 2009. Here it is: Memory Leak: Type=Data; Total size=26; Count=1; The stack is: System.pas _UStrSetLength 17477 System.pas _UStrCat 17572 Process.pas InputGedcomFile 1145 That is all there is in the stack. EurekaLog is pointing me to the location where the memory that was not released was first allocated. According to it, the line in my program is line 1145 of InputGedcomFile. That line is: CurStruct0Key := 'HEAD' + Level0Key; where CurStruct0Key and Level0Key are simply defined in the procedure as local variables that should be dynamically handled by the Delphi memory manager when entering and leaving the procedure: var CurStruct0Key, Level0Key: string; So now I look at the _UStrCat procedure in the System Unit. Line 17572 is: CALL _UStrSetLength // Set length of Dest and I go to the _UStrSetLength procedure in the System Unit, and the relevant lines are: @@isUnicode: CMP [EAX-skew].StrRec.refCnt,1 // !!! MT safety JNE @@copyString // not unique, so copy SUB EAX,rOff // Offset EAX "S" to start of memory block ADD EDX,EDX // Double length to get size JO @@overflow ADD EDX,rOff+2 // Add string rec size JO @@overflow PUSH EAX // Put S on stack MOV EAX,ESP // to pass by reference CALL _ReallocMem POP EAX ADD EAX,rOff // Readjust MOV [EBX],EAX // Store MOV [EAX-skew].StrRec.length,ESI MOV WORD PTR [EAX+ESI*2],0 // Null terminate TEST EDI,EDI // Was a temp created? JZ @@exit PUSH EDI MOV EAX,ESP CALL _LStrClr POP EDI JMP @@exit where line 17477 is the "CALL _ReallocMem" line. So then what is the memory leak? Surely a simple concatenate of a string constant to a local string variable should not be causing a memory leak. Why is EurekaLog pointing me to the ReallocMem line in a _UStrSetLength routine that is part of Delphi? This is Delphi 2009 and I am using the new unicode strings. Any help or explanation here will be much appreciated.

  Read the article

• C#: How to avoid WIA-error when scanning documents with 2400dpi or more?

  - by Stephan_W

  Hello, when we scan a document with a resolution of 2400dpi or higher, we recieve (for example) the following error-message: COMException: Ausnahme von HRESULT: 0x80010100 (RPC_E_SYS_CALL_FAILED) or COMException: Ausnahme von HRESULT: 0x8021006F in one of the following lines img = itm.Transfer(scanFormat.ScanFormat) as WIA.ImageFile; img = ip.Apply(img as WIA.ImageFile); some screenshots for the mentioned errors: http://www.amarant-it.de/TempDownload/WIA_Error01.png or the same path with WIA_Error02.png and WIA_Error03.png for scanning we use the following code: #region Image-Convert-Settings //IP.Filters.Add IP.FilterInfos("Convert").FilterID //IP.Filters(1).Properties("FormatID").Value = wiaFormatJPEG WIA.IImageProcess ip = new WIA.ImageProcessClass(); object convert = "Convert"; WIA.IFilterInfo fi = ip.FilterInfos.get_Item(ref convert); ip.Filters.Add(fi.FilterID, 0); convert = "FormatID"; object formatstring = scanFormat.ScanFormat; WIA.IFilter filter; foreach (WIA.IFilter fTemp in ip.Filters) { filter = fTemp; WIA.IProperty prop = filter.Properties.get_Item(ref convert); prop.set_Value(ref formatstring); } #endregion #region Image-Scan + Convert img = itm.Transfer(scanFormat.ScanFormat) as WIA.ImageFile; img = ip.Apply(img as WIA.ImageFile); img.SaveFile("D:\\scan2." + img.FileExtension); Image image = Image.FromFile("D:\\scan2." + img.FileExtension); ilImages.Images.Add(image.ToString(), image); alImages.Add(image); if (ImageScanned != null) { ImageScanned(image); } #endregion can anyone help us with this problem? thanks

  Read the article

< Previous Page | 259 260 261 262 263 264 265 266 267 268 269 270  | Next Page >