Search Results

Search found 19925 results on 797 pages for 'retro software'.

Page 264/797 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

• Windows 8 unable to connect to WPA2 AES Wireless Network

  - by user170193

  I'm running Windows 8 and am unable to connect to my home wireless network. I've tried restarting the router, patching the drivers to the next version, patching the drivers to the last version, running windows update and patching the chipset drivers to the latest version. So far nothing has worked. My computer can get on the internet via USB tethering on my phone or an open WiFi connection, but it is unable to connect to my home WPA2 AES secured wireless network. It sees the network, attempts to connect, gets a limited connection and then drops the connection. All the other wireless devices in my household have no problems. I have the new Dell XPS 12, running Windows 8 using an Intel Centrino Advanced-N 6235 wireless adapter. I've refreshed windows twice now to try different driver configurations. I've tried uninstalling all the Dell software, I've tried uninstalling all the Intel software and reinstalling just the drivers. I've tried turning switching the ability for the Wireless driver to turn the computer off or on. I've tried setting up the connection manually from desktop mode. I've tried switching it on and off using the wireless button on the keyboard and in the software. So far nothing has allowed me to connect to the secured network. It just keeps getting a limited connection, dropping the connection and retrying. It's driving me crazy, any ideas, anything I missed? Thanks.

  Read the article

• Poor NFS Performance: OpenFiler

  - by Safin09

  Good Day Everyone, I have an issue with OpenFiler, a Linux-based operating that converts a computer system into a SAN/NAS appliance. Here is the problem. In my environment we have two Netapp Storevault 500 appliances that I normally perform backups to a NFS share. There are two backup cronjobs that use ghettoVCB to backup two groups of VM's. One group is a pool of 3 VMs. This takes 13 mins to complete. A second job that backups a pool of 5 VMs to a 2nd Storevault appliance which takes 2 hours. We then installed Openfiler on a old server that has 2 core Xeon processors. There is a software RAID 5 process in place. When performing the same backups to a NFS Openfiler share, the first backup job, which takes 13 mins, takes around 4 hours. The second backup job, which takes 2 hours, takes almost 10 hours to complete. This is unacceptable!!!! Especially considering the strain placed on the host ESX Server. I assumed that because of the software RAID 5, the overhead on the CPU explained the long backup times. I then installed Openfiler on a 2nd server, an IBM x306 machine which has a P4 Intel processor. This time no software RAID or any RAID at all. A single 750GB hard drive that contained the OS and the rest of the disk uses to backup VMs to a NFS share. I performed the first backup job of the pool of 3 VMs. This time the backup job took 1 and 1/2 hours to complete instead of 13 mins!!!!!!!!!! Is Openfiler simply poor at being an NFS Server!!!!!!!!!!!!! Has anyone else had these issues with Openfiler?

  Read the article

• Installing CDT on top of JDT: Conflicting Dependency

  - by someguy

  I am trying to install the CDT plugin on top my existing version of Eclipse, which was for Java. The problem is that I got this error message when I tried doing so via "Install New Software...": Cannot complete the install because of a conflicting dependency. Software being installed: Eclipse C/C++ Development Tools 4.0.3.200802251018 (org.eclipse.cdt.feature.group 4.0.3.200802251018) Software currently installed: Eclipse IDE for Java Developers 1.3.1.20100916-1202 (epp.package.java 1.3.1.20100916-1202) Only one of the following can be installed at once: International Components for Unicode for Java (ICU4J) 4.2.1.v20100412 (com.ibm.icu 4.2.1.v20100412) com.ibm.icu 3.6.1.v20070906 Cannot satisfy dependency: From: Eclipse IDE for Java Developers 1.3.1.20100916-1202 (epp.package.java 1.3.1.20100916-1202) To: org.eclipse.epp.package.java.feature.feature.group [1.3.1.20100916-1202] Cannot satisfy dependency: From: Eclipse C/C++ Development Tools 4.0.3.200802251018 (org.eclipse.cdt.feature.group 4.0.3.200802251018) To: com.ibm.icu [3.4.0,4.0.0) Cannot satisfy dependency: From: EPP Java Package 1.3.1.20100916-1202 (org.eclipse.epp.package.java.feature.feature.group 1.3.1.20100916-1202) To: org.eclipse.rcp.feature.group 3.6.0 Cannot satisfy dependency: From: Eclipse RCP 3.6.0.v20100519-9OArFKvFtsd7WLUKh-DcYTS (org.eclipse.rcp.feature.group 3.6.0.v20100519-9OArFKvFtsd7WLUKh-DcYTS) To: com.ibm.icu [4.2.1.v20100412] Cannot satisfy dependency: From: Eclipse RCP 3.6.1.r361_v20100827-9OArFLdFjY-ThSQXmKvKz0_T (org.eclipse.rcp.feature.group 3.6.1.r361_v20100827-9OArFLdFjY-ThSQXmKvKz0_T) To: com.ibm.icu [4.2.1.v20100412] What can I do to solve this?

  Read the article

• Drobo FS vs. MacBook Pro: Finder works, Drobo Dashboard doesn't

  - by dash-tom-bang

  Does anyone have any experience with the new Drobo FS, specifically using it from a MacBook Pro? My experience thus far is this: Set up the Drobo Dashboard software (hereinafter called simply 'Dashboard') on my WinXP machine, which is hard-wired to the network to do the data migration from my NAS-that's-being-replaced (a 250G SimpleShare which works well enough but I was always afraid of losing the one disk). The Dashboard seems to work ok, except that the DroboCopy function doesn't work at all. This is the backup solution, which I can configure, and if I launch it (e.g. to back up from the old NAS to the Drobo) it spins the NAS, seeking the drive all over hell and creation, until finally giving up an hour+ later with zero files copied. Selecting only a subset of the data yields the same effect albeit more quickly. On my Mac I installed the Dashboard software too, since most of my fiddling with the device will be from my couch in the living room. Finder connects to the box just fine, fwiw, but Dashboard just sits there, "waiting for connection." This is considerably more bothersome than the above paragraph, but I figured I'd give whatever information I have. Drobo is insisting that I send them this "Debug Log" file that their software generates. Does anyone know what's in it? It's encrypted and they won't tell me, which spooks me just a bit; not like I'm terribly concerned about privacy but I don't want to be sending personal information out to every clown who says they "need" it in order to help me. thanks a ton, -tom!

  Read the article

• File transfer from MP3 player to computer

  - by JP

  I own an old 20GB Creative Zen jukebox (all external screws are gone on it LOL) and I would like to transfer files back to my PC to get them on my new iPod. Problem is, no matter what software I use (WinAMP, Creative Media Source or Windows Media Player), it just stops transferring files on my HD with an error message that says there is no more space on the destination folder. Problem is, there is still 320GB free. I tried lot of things like installing newer driver, latest Zen plug-in for Media Source, latest WinAMP version. Sometimes, it just works and then again, it stops working and I get this non-sense error. Restarting my PC sometime solves the issue by giving me enough time to transfer 10 or 15 more files and then I get the error again and again. Yesterday though I managed to transfer up to 3GB of MP3s on my computer before getting the error. Seems like I'm having a driver issue or a weird behavior from the player and/or the software I'm using. 3 different software can't reproduce the exact same issue by themselves so it must be something related to the driver. I can't find any post of any sort concerning such issue on old forums. Any idea?

  Read the article

• Running gdb on Ubuntu 9.10 Apache2 Install

  - by AJ

  Hi all, I am trying to run gdb to debug my Ubuntu 9.10 Apache2 install and having a couple of problems: It seems like the package installed by Ubuntu for Apache2 does not include debugging symbols; is there a different version of the package I should be using for developing/debugging? When I try to run gdb, I get an error that looks to be caused by some missing environment variable. Are there additional options I should pass to "run" to get this to work? Here is the output of the debugger session: root@aj-ubuntu:/usr/sbin# gdb apache2 GNU gdb (GDB) 7.0-ubuntu Copyright (C) 2009 Free Software Foundation, Inc. License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html> This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law. Type "show copying" and "show warranty" for details. This GDB was configured as "x86_64-linux-gnu". For bug reporting instructions, please see: <http://www.gnu.org/software/gdb/bugs/>... Reading symbols from /usr/sbin/apache2...(no debugging symbols found)...done. (gdb) run -X Starting program: /usr/sbin/apache2 -X [Thread debugging using libthread_db enabled] apache2: bad user name ${APACHE_RUN_USER} Program exited with code 01. (gdb) Thanks in advance, -aj

  Read the article

• Editing a windows XP installation's registry without being able to log in.

  - by Alain

  I've got a windows XP installation that has a corrupt registry. A worm (which was removed) had hijacked the HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogon entry (which should have a value of Userinit=C:\windows\system32\userinit.exe When the worm was removed, the corrupt entry was deleted entirely, and now the system automatically logs off immediately after attempting to log in. Regardless of the user and boot mode, no accounts can be logged in to. The only thing required to correct this behavior is to restore the registry key, but I cannot come up with any ways of editing the registry without logging in to an account. I tried remotely connecting to the registry but the required services aren't enabled on the machine. I tried booting on the same machine using the BartPE boot CD but I could not find any way of editing the registry on the C:\Windows installation - running regedit only modifies the X:\I386\ registry in memory. So, what can I use modify the registry of an un-login-able Windows XP instance so that I can log in again? Thanks guys. EDIT: The fix worked. The solution to the auto-logoff problem was, as hoped, to simply add the value mentioned above to the appropriate registry entry. This can be done using the BartPE Boot CD, as described in the accepted answer below, but I used the Offline NT Registry Editor software mentioned in another answer. The steps were: Boot from the NT Registry Editor CD Follow the directions until the appropriate boot sector is loaded. Instead of using one of the default options for modifying passwords or user accounts, type "software" to edit that hive. Type '9' to enter the command line based registry editor. Type "cd Microsoft" (enter) "cd Windows NT" (enter) "cd CurrentVersion" (enter) "cd Winlogon" (enter) Type "nv 1 Userinit" to create a new value under the Winlogon key Type "ev Userinit" to edit the new value, and when prompted, type "C:\windows\system32\userinit.exe" (enter) Type 'q' to quit the registry editor, and as you back out of the system, follow directions to write the hive back to disk. Restart your computer and log in - problem solved. (generic 'warning: back up your registry' disclaimer)

  Read the article

• Convert DVD Movie to MPEG and view on PS3 via Windows Media Server 12

  - by Vidar

  I think Apollo spacecraft missions to the moon were easier than this! I have tried dozens of DVD ripping software and media servers and have had limited success in trying to convert all my DVDs into file format so they can be viewed on PS3. I have also been on dozens of forums and it's all getting a bit confusing, some advice is out of date, some software is no longer updated - updates have been applied to PS3 operating system and windows and so on and so on. There has to be a way to get all this knowledge and information in one place that's up to date so people can do the same thing as me. Can anyone give me some definitive software and/or advice to do the following: I have over 200 DVDs - I want to convert these to VOB files (rename to MPEG so WMS can stream them). Store on hard disk and view via Windows Media Server 12 (Windows 7). I will then be able to view these via my PS3 in my lounge and never have to get out another DVD case again. I don't want to encode to any other format like MP4 with H.264 because I will lose some of the original quality. So MPEG-2 is fine for me. Note: I have been using DVD Shrink but it gives odd results sometimes. The main problem being that once the DVD has been ripped - WMS shows the wrong playing length of the film, however if I use VLC Media Player it will play through the whole film OK. This is obviously no good when it comes to streaming on the PS3.

  Read the article

• Restoring snapshot for Microsoft Exchange server

  - by Mugen

  Hi, The background: I need to do some testing with Microsoft exchange server. Specifically, I'll be installing some software on the Microsoft exchange server machine and uninstalling that same software again. The problem I face: While I repeatedly do this with different versions of my software there is a chance that sometime later the Exchange server installation might get corrupted. When that happens I would need to reinstall Exchange server which I feel is somewhat of a chore. So what I am planning to do is to install the Ms Exchange server on a virtual machine in VMware ESX server and take a snapshot so that during my work whenever the installation is corrupted I can restore the snapshot. So here's my question: Would restoring the snapshot for the Microsoft Exchange server virtual machine work correctly? I'm not familiar with the intricacies of exchange server and any changes (if any) that happen with the Domain controller when we use or install an exchange server (Personally I don't think that should happen but just making sure). I have a shortage of time and hence decided to post this question here. Could someone please tell me whether restoring a snapshot for Exchange server would work fine? Thanks a load, Mugen

  Read the article

• Hard drive failed, suspected filesystem corruption, still cannot salvage any data from harddrive

  - by Hippy-Head

  Firstly, I am terribly sorry if this is a duplicate, but I couldn't find a similar issue to mine, so here goes. I have a 1TB hdd bought around 8 months ago used as backup hard drive. I have not used the drive for a period of time whatsoever, and when I was trying to get back to some files on it, it was completely wiped just like that. At first it would not boot I tried everything from command line chkdsk and filesystem recovery software to rebuilt it. After a few attempts I managed to initialize it, at that time it was an achievement. The problems started when I tried to recover the data inside, I have used A LOT of software free and commercial software on both Mac and Windows, with the help of cmd or Terminal commands, however no data of any kind was recovered, even after leaving it thoroughly scan for around 9-10 hours all night sometimes longer, with no results at all. I am somewhat desperate, I am usually good at retrieving data from corrupt hard drives, but this is not the case. Call me paranoid, but I do not want to give it to someone to fix it for me, as I have a lot of photos and personal stuff that I do not want anyone to see.

  Read the article

• Cheapest iSCSI SAN for Windows 2008/SQL Server clustering?

  - by MichaelGG

  Are there any production-quality iSCSI SANs suitable for use with Windows Server 2008/SQL Server for failover clustering? So far, I've only seen Dell's MD3000i, and HP's MSA 2000 (2012i), which both are around $6K with a minimal disk configuration. Buffalo (yea, I know), has a $1000 device with iSCSI support, but they say it will not work for 2008 failover clustering. I'm interested in seeing something suitable for failover in a production environment, but with very low IO requirements. (Clustering, say, a 30GB DB.) As for using software: On Windows, StarWind seems to have a great solution. But it's actually more money than buying a hardware SAN. (As I understand, only the enterprise edition supports having replicas, and that's $3000 a license.) I was thinking I could use Linux, something like DRBD + an iSCSI target would be fine. However, I haven't seen any free or low-cost iSCSI software that supports SCSI-3 persistent reservations, which Windows 2008 needs for failover clustering. I know $6K isn't much at all, just curious to see if there are practical cheaper solutions out there. And finally, yes, the software is expensive, but many small business get MS BizSpark, so the Windows 2008 Enterprise / SQL 2008 licenses are completely free.

  Read the article

• WTH? Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

  - by damx

  Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" huh? This is my first time dealing w/ Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I am can surf the web w/ no problems. Please help. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install

  Read the article

• Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

  - by damx

  Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" This is my first time dealing with Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I can surf the web with no problems. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install.

  Read the article

• Downmix ALL SYSTEM audio to mono - Windows 7

  - by Mike K.

  I'm deaf in one ear and want to use my headphones when playing a game and talking with my friends on Skype/TS/Mumble/etc while also sometimes listening to music. I need ALL my system audio to be downmixed to mono so that my ONE hearing ear gets ALL audio channels instead of split stereo audio. No, none of the other similar questions on superuser have a solution. My headphone properties does not have a 'Mono' option, I don't have a 'Headphone Virtualization' option, and my Realtek HD audio driver software doesn't have these options either (driver was updated 11/14/2012). Don't even talk about setting the balance of one side of the headphones to 0. You're not paying attention if you suggest that. JACK and Virtual Audio Cable didn't work. It's possible I configured them wrong, but I followed the steps I found in related questions and still got split stereo out. TL;DR I need a viable, working, software solution (I say software because I have a USB headset) for forcing ALL system audio to mono so that I can hear literally everything through the one earpiece. Thanks!

  Read the article

• HP Officejet 4500 G510n-z Not Showing up in Remote Desktop (Terminal Services)

  - by Greg_the_Ant

  I installed this printer on a windows XP machine. First using the wireless option, and later using USB. In both cases when I connect to my other computer (also Windows XP) via terminal services and check printers in the local resources tab it does not show up on the remote session. I used to have a Samsung connected to my local computer over USB and and that worked fine over terminal services. Things I tried so far: I did read this page and installed the software fix on both computers: (Printers that use ports that do not begin with...) I installed the minimum HP software install on the remote computer and that didn't help either. I also tried running the add new printer wizard on the remote computer: I selected "local printer attached to this computer" and did not check the "automatically.." option. On the next page of the wizard I can select an option for "use the following port". I see options for TS001 through TS009 there. I'm assuming those are coming from the local machine. I tried clicking each one and then checking "have disk" and pointing it to C:\3be8dc611b11322e8ddf8a67\i386\msxpsdrv.inf 1 but for every single TS00.. port it says "The specified location does not contain information about your hardware." Any help would be greatly appreciated. I'm pretty stuck at this point. 1 C:\3be8dc611b11322e8ddf8a67 is the folder I extracted the HP driver software to after I downloaded it.

  Read the article

• Group Policy installation failed error 1274

  - by David Thomas Garcia

  I'm trying to deploy an MSI via the Group Policy in Active Directory. But these are the errors I'm getting in the System event log after logging in: The assignment of application XStandard from policy install failed. The error was : %%1274 The removal of the assignment of application XStandard from policy install failed. The error was : %%2 Failed to apply changes to software installation settings. The installation of software deployed through Group Policy for this user has been delayed until the next logon because the changes must be applied before the user logon. The error was : %%1274 The Group Policy Client Side Extension Software Installation was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance. When I reboot and log in again I simply get the same messages about needing to perform the update before the next logon. I'm on a Windows Vista 32-bit laptop. I'm rather new to deploying via group policy so what other information would be helpful in determining the issue? I tried a different MSI with the same results. I'm able to install the MSI using the command line and msiexec when logged into the computer, so I know the MSI is working ok at least.

  Read the article

• Why is Mac supposedly better than Windows for graphics?

  - by Svish

  Ok, people just keep telling me that if you're going to be working with graphics and design and stuff, you should get a Mac. And I just don't get the logic. Because most of these people would be working with Adobe software, which are for both Windows and Mac. To me it seems like their whole argument is based on that "everyone else does". Like, Mac had some graphics software that Windows didn't earlier in history, so most people were using Mac. And since most people were using Mac, new people also started using Mac. And since most people were using Mac, schools and universities used Mac. Which taught new people to use Mac. So they were using Mac. And told everyone they met that everyone they knew were using Mac. And so on. Anyways... What is the deal really? Is there actually any advantage in using Mac for graphics and design and such things? My take is that you pretty much have the same software and both Mac and Windows are powerful enough, support enough RAM, are stable (as long as you don't install lot's of junk or faulty drivers), et cetera. So, can anyone give me a good explanation on this? Is there a real difference or are people just brainwashed?

  Read the article

• Datacenter IP Addressing and DNS Management

  - by user65248

  Hello everyone Basically we are setting up a small Datacenter, about 300 amps power and max 50 racks, Im saying these coz I wanna u imagine the size and requirements, I have studied networking mostly Microsoft and Windows based systems , but I cant get how the IP addressing and DNS management and configuration works in a Datacenter , and unfortunately I have to setup everything by myself but defe we will have some staff to do some job. Now my questions Datacenter IP Addressing Suppose we have got a block of 200 IP addresses from our ISP, How can I manage these block of IP addresses, is there any software out there to simplify this I heard that using DHCP server in a datacenter is not recommended, otherwise what would u say about MS DHCL server ofc considering we need to have backup serversin case of failur How can I assign a block of IPs to a specific rack, I know with different software and management its different but Im asking how it is done normally IP addresses are exposed to the whole network, what if a customer try to use an IP address and is not assigned to their server or rack , how can I prevent this or how can I track the IP usage DNS Management Im goin to setup at least two servers for our DNS servers, I know nothing about Datacenter DNS system, but I have configured DNS server in normal networks and also for webservers, Now I wanna know What exactly needs to be done for a DNS in a datacenter that is not done for normal networks. How can I configure PTR records why cant I configure PTR records on my webserver side DNS server and it should be done on datacenter DNS server , I mean what is the difference in DC DNS servers that allow us to to so , I know the question is very silly and simple but Im confused Is there any software outthere to allow doing the whole thing, I mean automatically add records to the DNS and also managin IP addresses !? Thanks in advance

  Read the article

• Why does this batch script terminate unexpectedly?

  - by neurolysis

  This batch script terminates when %CHECKCONTINUE% is given a null value by not inputting anything on line 13 (SET /p CHECKCONTINUE=Okay to continue? (y/n):), why is this? @ECHO OFF SETLOCAL TITLE Registry restore script REM Restores registry settings and disables the cloud SET %CHECKCONTINUE%= :listaction ECHO I'm about to... ECHO 1.) Remove the registry data that specifies settings for TF2 ECHO 2.) Forcibly disable Steam Cloud. ECHO. SET /p CHECKCONTINUE=Okay to continue? (y/n): REM No? IF %CHECKCONTINUE%==n GOTO exit IF %CHECKCONTINUE%==no GOTO exit REM Yes? IF %CHECKCONTINUE%==y GOTO start IF %CHECKCONTINUE%==yes GOTO start REM Did they put something else? IF DEFINED %CHECKCONTINUE% GOTO loop-notvalid REM Did they not put anything at all? IF NOT DEFINED %CHECKCONTINUE% GOTO loop-noreply :start REM Delete application specific data REG DELETE HKEY_CURRENT_USER\Software\Valve\Source\tf\Settings /f REG DELETE HKEY_CURRENT_USER\Software\Valve\Steam\Apps\440 /f REM Disable Steam Cloud for TF2 REG ADD HKEY_CURRENT_USER\Software\Valve\Steam\Apps\440 /v Cloud /t REG_DWORD /d "0x0" /f :exit ENDLOCAL EXIT :loop-notvalid ECHO. ECHO That's not a valid reply. Try again. ECHO. SET %CHECKCONTINUE%= GOTO listaction :loop-noreply ECHO. ECHO You must enter a reply. ECHO. SET %CHECKCONTINUE%= GOTO listaction

  Read the article

• InstallShield or Windows installer corrupted

  - by Bobby S

  Just recently I've been unable to install any software on my Windows 7 machine. Anything that uses InstallShield or the Windows installer will just hang or give a weird error. I noticed there will be many duplicate isbew64.exe processes (like 25) that launch and then just sit there or else a lot of msiexec.exe *32 processes, depending on what I'm trying to install. One piece of software specifically is the Logitech Harmony software. It gives me an *is_string_not_defined* error, saying c:\program files (x86)\:\ the filename, directory name, or volume label syntax is incorrect. The other thing I was trying to install was Battlefield: Bad Company 2, and that just hangs as well, and then just leaves all the Windows installer processes running in the background after I quit the install process. Very odd. I've checked well and googled these issues, it doesn't appear to be any sort of malware issue. I feel like it's related to some kind of corrupted installer application. I've rebooted, deleted the InstallShield folder in program files/common files as some places online suggested but to no avail. I have no idea what to do, any ideas?

  Read the article

• Cisco Catalyst 4500 Policy Based Routing

  - by Logan

  In order to test a new firewall I just set up I'm trying to implement policy based routing on our core switch. I want traffic from certain vlans to be routed to the new firewall while everything else continues being routed through the old firewall. I was trying to use this guide. Everything from that guide works fine except trying to run the "ip policy route-map" command in the interface configuration mode. IOS is telling me that such a command doesn't exist. A "show ip interface vlan" command says that policy routing is disabled. Any ideas? Output of "show ver": Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500-IPBASEK9-M), Version 12.2(53)SG, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Thu 16-Jul-09 19:49 by prod_rel_team Image text-base: 0x10000000, data-base: 0x11D1E3CC ROM: 12.2(31r)SG2 Dagobah Revision 226, Swamp Revision 34 RTTMCB2223-1 uptime is 3 years, 22 weeks, 2 days, 19 hours, 28 minutes Uptime for this control processor is 51 weeks, 2 days, 18 hours, 2 minutes System returned to ROM by power-on System restarted at 19:22:02 UTC Tue Jul 12 2011 System image file is "bootflash:cat4500-ipbasek9-mz.122-53.sg.bin" ... cisco WS-C4510R (MPC8245) processor (revision 4) with 524288K bytes of memory. Processor board ID FOX103703W3 MPC8245 CPU at 400Mhz, Supervisor V Last reset from PowerUp 42 Virtual Ethernet interfaces 244 Gigabit Ethernet interfaces 511K bytes of non-volatile configuration memory. Configuration register is 0x2

  Read the article

• Can I setup a test server and then transfer everything to a diff. production server?

  - by Justin

  Hello, I am going to be setting up a "real" server, but it's not being shipped for another week. I was planning on setting up most of the server's functionality using an extra workstation I have. I wanted to set-up Windows Server 2003 or 2008, IIS, Terminal Services, Firewall, and Antivirus on this regular machine. I'd also be installing software like Winzip and VMWare that'll be used on the server. I can't ghost the machine, as far as I've done in the past, because the motherboard/cpu/etc. will all be different. Is there any way to export all of the "server settings" or something like that so I can move everything from test to production? Is there any software out there that does something similar to this? Some things I'm going to have to wait on such as setting up the file server completely in its raid configuration, but I'd like to get the simple server stuff and network setup out of the way. Has anyone done this before? Do I need software, open-source or not, to do this? Or maybe there's a way to export all the server settings in some way? Thanks in advance! Justin

  Read the article

• OSX 10.6 goes unresponsive

  - by mjb

  This behavior continues to perplex me. My MBP, running 10.6.7, stops responding to all Apple-based software. Whatever software I have open remains open (Terminal, iTunes, Safari), but if I try to use the F-shortcuts or launch any OSX-based software not already open (System Preferences for example) it just bounces in the dock then never launches. I also cannot reboot without hard rebooting. I left terminal open, so I see the following in /var/log/system.log Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.585 ReportCrash[59432:7f1f] Saved crash report for CoreServicesUIAgent[59576] version ??? (???) to /Library/Logs/DiagnosticReports/CoreServicesUIAgent_2011-06-25-193902_localhost.crash Jun 25 19:39:02 mjb-2 com.apple.ReportCrash.Root[59432]: 2011-06-25 19:39:02.586 ReportCrash[59432:b10f] Saved crash report for quicklookd[59571] version ??? (???) to /Library/Logs/DiagnosticReports/quicklookd_2011-06-25-193902_localhost.crash Two requests: (1) please don't send this off to the Apple area so it can die a slow painful rotting death of tumbleweed. (2) Suggest what I should kill -9 or logs to look at to cut this sh*$ out. Cheers, mjb

  Read the article

• Cannot connect with Cisco VPN but can connect with ShrewSoft VPN

  - by rodey

  EDIT: We connected an air card to the computer to use a different Internet connection and using the Cisco software, we were able to successfully connect to our VPN server. I just don't understand why the ShrewSoft VPN client would connect but the Cisco connection won't. I'm not our network admin so sorry if I butcher some of the terminology. I have a computer at remote site that connects to our network through Cisco VPN. It uses the Cisco VPN software to do so. The problem is that the computer at this site cannot connect to our VPN because it is getting error "Reason 412: The remote peer is no longer responding." To see if perhaps something on their network was blocking the connection, I installed the ShrewSoft VPN client on the computer, imported our .pcf file and connected with no problem. I have tried two different versions of the Cisco VPN software (4.8.0.* and 5.0.03.*) and have the same problem. I installed Wireshark on the computer and have confirmed (while trying to connect through Cisco) that the computer is trying to contact the VPN server but is not receiving a response. We are not having any other problems regarding users not being able to connect. I'm at a loss at what else to check. I'll be monitoring this and have access to the computer at any time.

  Read the article

• How to move my data from my old MacBook Pro to my new one?

  - by Tim Büthe

  I just purchased a new MacBook Pro and already got an 2008 model. I wonder how I move all my data over to the new one. My first idea was, to use my Time Machine backup and restore from it, which seems to be a good idea and should work just fine regarding to this link: http://blog.duncandavidson.com/2008/01/restoring-from-time-machine.html. But, since my current MacBook got older Software on it, like iLife '08 instead of iLife '09 I would have to upgrade this afterwards. Is this correct, or does Time Machine does some magic to exclude well known software? And is it possible to reinstall or upgrade iLife with the included installation DVDs? My second idea is, to just swap the hard drives instead of using the Time machine backup. If it is not too complicated to remove the hdd, this should be the fastest way. This also has the benefit, that the 2008er MacBook then contains a brand new installation and I don't have to remove all my stuff or reinstall Mac OS before I give it away. My question on that second idea would be: does snow leopard handle this stuff correctly? I reboot with the new hardware and all just works fine? So in a nutshell: What would you do: restore from backup or swap drives? And what about the new software?

  Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >