Search Results

Search found 19499 results on 780 pages for 'transaction log'.

Page 264/780 | < Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >

  • Updated 12.04 and now Xorg is dead from NVidia drivers

    - by Xatolos
    I updated (August 16) Ubuntu 12.04 today and while I admit I didn't look what was being updated, it was large enough to have had an NVidia update in it. Problem is later on when I turned on my laptop again it won't boot into a GUI, just to the terminal (which I don't really know much of how to do anything). Now I have been able to log in and type "startx" to start up the GUI and now its complaining that my NVidia driver (if I remember correctly) is listed as being version 304.(number) and the version installed/found is version 295.(number). I don't know how this happened and now I'm stuck. I have no idea how it happened and don't know how to fix. Does anyone have any ideas? I have only access to wifi internet and no idea how to log on without the GUI so getting a new NVidia package isn't something I would know how to do even... Any and all help would be highly appreciated. edit: If it helps, I'm using a ASUS G Series G53JW-A1 http://www.newegg.com/Product/Product.aspx?Item=N82E16834220861

    Read the article

  • Preventing - Large Number of Failed Login Attempts from IP

    - by Silver89
    I'm running a CentOS 6.3 server and currently receive emails entitled "Large Number of Failed Login Attempts from IP" from my server every 15 minutes or so. Surely with the below configured it should mean only the person using the (my static ip) should be able to even try and log in? If that's the case where are these remote unknown users trying to log into which is generating these emails? Current Security Steps: root login is only allowed without-password StrictModes yes SSH password login is disabled - PasswordAuthentication no SSH public keys are used SSH port has been changed to a number greater than 40k cPHulk is configured and running Logins limited to specific ip address cPanel and WHM limited to my static ip only hosts.allow sshd: (my static ip) vsftpd: (my static ip) whostmgrd: (my static ip) hosts.deny ALL : ALL

    Read the article

  • I keep getting blue screen - Windows 7 x64 (maybe ram?)

    - by Lostman
    I have +- 5yrs old pc runnig windows 7 and I've been getting blue screen recently. I had win 8 and I got a lof of erros with ram memory, so I reinstalled back to Win 7. (I have 2x 2 GB RAM) To make a better image of my errors - I get them while writing email, installing nvidia driver, sound driver, running RAM test. I got a log of my last error, could anyone tell me what is it? Should I get new RAM memories? The last log I got: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 1029 Additional information about the problem: BCCode: 1a BCP1: 0000000000000403 BCP2: FFFFF680004FAEA0 BCP3: 380000007594A867 BCP4: FFFF6680004FAEA0 OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\062513-16156-01.dmp C:\Users\Boss\AppData\Local\Temp\WER-32156-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt MemTest86+ Error:

    Read the article

  • How to run a process and completely detach it of its parent shell

    - by Bicou
    I'm running a program on a linux server that will take days to complete. I'm launching it from my workstation from an SSH terminal, as this program is command-line only. I want to be able to do all of these : launch that program, redirect standard outputs to files, exit my SSH session without making this terminate the process. I thought about $ ./MyProg.csh -params -foo -bar </dev/null 1>~/out.log 2>~/err.log & However, the process is terminated the moment I close my SSH session. My workstation is running Windows XP, and I cannot guarantee its uptime over several days, which is required for the processing of my data on the Linux server. As you may have noted, my program requires to be launched from CSH. Is it possible to do this ? Thanks.

    Read the article

  • Displaying Datamatrix in application error screen

    - by DaveNay
    Quite often we will get a report from a user in the field saying there was an error in our application. Frequently this leads to the typical round of "What was the error?" "I don't know, it was just an error." We of course log these faults to the log files, and we can even enable detailed debug logs, but this involves the end user changing a setting in the configuration file and then finding the correct files and then emailing them to us. As I'm sure you can all imagine, there are plenty of pitfalls and alligators in this methodology. Recently a couple of people have used their cell phone to email me a "screen capture" of the fault, and while this helps, we still have to scrutinize the image to find the exact fault, and if enabled, the stack trace. So this evening, I had the brilliant idea (IMHO) to encode the fault into a Datamatrix barcode image and then encourage users to send me a picture from their cell phone. I can then decode the datamatrix and get a parse-able error message! Our core technology is machine vision, so the decoding of the datamatrix image would be trivial, I just need to find a method of generating the actual image to display in the fault handler. Thoughts?

    Read the article

  • WordPress mod_rewrite redirect specific folders

    - by Ps Cjef
    As a new user, I'm not allowed to post more than two hyperlinks here. So I have added a space after every http (ignore them and read as full URLs). System: Debian Etch, Apache 2.2 I have a WordPress instance with multiple blogs. I would like to redirect some of the folders based on the year and month, while leaving other folders go to the actual locations. Example: I have archives for a few years, like 2010, 2011 and 2012: http ://mydomain.com/wordpress/myblog/2010/02 http ://mydomain.com/wordpress/myblog/2011/01 http ://mydomain.com/wordpress/myblog/2012/01 I would like to redirect all 2010 and 2011 posts to another blog with the same folder structure: http ://mydomain.com/wordpress/myotherblog/2010/02 http ://mydomain.com/wordpress/myotherblog/2011/01 and so on. I would like to have 2012 and beyond to go to the actual site (http ://mydomain.com/wordpress/myblog/2012/01). I tried mod_rewrite with the following, one rule at a time to test redirection for just one year (and to expand later for other years), and none of them worked! * RewriteEngine is already on since there are some default WordPress rewrites. * RewriteBase is set to http://mydomain.com/wordpress/ . * I put my rule before all the other default WordPress rules are processed. Didn't work solution #1 RedirectMatch 301 /myblog/2010/(.*) /myotherblog/2010/$1 Didn't work solution #2 RewriteRule /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 [R=301] Didn't work solution #3 RedirectPermanent /myblog/2010/(.*) http ://mydomain.com/myotherblog/2010/$1 I've also tried the above rules with and without a fully qualified URL for the new location. The rewrite log, with log level set to 9, did not provide any useful information. It shows that it looks at the pattern specified against the URL (as mentioned in the rule), but finally what happens is a passthrough to http ://mydomain.com/myblog/ for all URLs or a 500 Internal Server Error. Any ideas on where I could be going wrong or any alternative solutions?

    Read the article

  • Deactivate SYN flooding mechanism

    - by mlaug
    I am running a server that is running a service on port 59380. There are more than 1000 machines out there connecting to that service. Once I need to restart the service all those machines are connecting at the same time. That made some trouble as I have seen that log entry in kern.log TCP: Possible SYN flooding on port 59380. *Sending cookies*. Check SNMP counters. So I changed sysctl net.ipv4.tcp_syncookies to 0 because the endpoints to not handle tcp syn cookies correctly. Finally I restarted my network to get the changes in production Next time I had to restart the service, the following message was logged TCP: Possible SYN flooding on port 59380. *Dropping request*. Check SNMP counters. How can I prevent the system for doing such actions? All necessary counter measures are done by iptables...

    Read the article

  • External Full HD monitor and Virtual Desktop Size

    - by Stefan
    I have two FullHD monitors attached to my ATI graphics card [2]. The resolution of both of them is detected properly without any modifications to /etc/X11/xorg.conf. I can run both of them in clone mode. However, when I try to run them next to each other, I got the following error: The selected configuration for displays could not be applied. If tried to fix this according to [1]. My xorg.conf now looks like this: Section "Module" Load "glx" EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 SubSection "Display" # The 1088 is the smallest multiple of 32 >= 1088 # see manpages Virtual 1920 1088 EndSubSection EndSection This does not seem to be parsed properly. After restarting X, I cannot set resolutions beyond 1600 or so any more. /var/log/Xorg.0.log gives: [ 15.676] (II) fglrx(0): Not using mode "1920x1080" (width too large for virtual size) [ 15.676] (II) fglrx(0): Not using mode "1680x1050" (width too large for virtual size) Are my modifications syntactically incorrect? According to the man page, it should be fine. Any ideas? OS: Ubuntu 11.10 64bit [1] http://askubuntu.com/a/75546/5023 [2] 01:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5700 Series]

    Read the article

  • Network printer problem with 12.04

    - by G. He
    I had an HP LaserJet 3030 printer connected to an Ubuntu box. It worked fine with 11.10. I was able to print from Ubuntu as well as from Windows and Mac from the home network. About a month or so ago, I upgraded 11.10 to 12.04, then things started to falling apart. My Windows 7 laptop couldn't print to the printer any more. Today, I installed many updates on 12.04, hoping that would fix the printing problem. Unfortunately, it made the situation much worse. Now not only my Windows 7 laptop won't print, my XP desktop won't print either. Every time I print something from the Windows computer, the Ubuntu box logs an error message in /var/log/samba/log.'machineName' as: _spoolss_OpenPrinterEx: Cannot open a printer handle for printer \\server. It is interesting that it uses the server name as the printer, not the \\server\xyzprinter as the printer name. Anyone had a similar problem? Anyway to work around the problem?

    Read the article

  • Lots of Internet browsing issues, all browsers

    - by dario_ramos
    Before the upgrade, everything was working fine. Now, however, I can connect to the Internet but a lot of stuff fails, and the weirdest thing is that it happens with Firefox, Chromium and Opera. Some of the things that fail: I can't log in to Stack Overflow, after entering user/pass it loads for a long time on Firefox and throws Error 408 (browser request timed out) on Chromium and Opera I can't log in to Hotmail, similar symptoms I can login to Facebook, but when I try to write a comment, or just post something in my wall, it stays loading for a long time, and then fails The first two issues seem to be related to secure pages, and the second one is another issue altogether, I believe. However, they all happen with all browsers, which is really weird. Talking about weird: I connect using a Huawei SmartAX MT 810 USB modem, which cost me blood and tears to get it working under Ubuntu. I ordered an ethernet modem/router with my ISP, and I'm still waiting, but this issue intrigues me anyway. Has anyone experienced this kind of problems? I Googled around, but couldn't find a similar case.

    Read the article

  • Why is quicksort better than other sorting algorithms in practice?

    - by Raphael
    This is a repost of a question on cs.SE by Janoma. Full credits and spoils to him or cs.SE. In a standard algorithms course we are taught that quicksort is O(n log n) on average and O(n²) in the worst case. At the same time, other sorting algorithms are studied which are O(n log n) in the worst case (like mergesort and heapsort), and even linear time in the best case (like bubblesort) but with some additional needs of memory. After a quick glance at some more running times it is natural to say that quicksort should not be as efficient as others. Also, consider that students learn in basic programming courses that recursion is not really good in general because it could use too much memory, etc. Therefore (and even though this is not a real argument), this gives the idea that quicksort might not be really good because it is a recursive algorithm. Why, then, does quicksort outperform other sorting algorithms in practice? Does it have to do with the structure of real-world data? Does it have to do with the way memory works in computers? I know that some memories are way faster than others, but I don't know if that's the real reason for this counter-intuitive performance (when compared to theoretical estimates).

    Read the article

  • ZFS Recover from Faulted Pool State

    - by nickv2002
    I have a six disk ZFS raidz1 pool and had a recent failure requiring a disk replacement. No problem normally, but this time my server hardware died before I could do the replacement (but after and unrelated to the drive failure as far as I can tell). I was able to get another machine from a friend to rebuild the system, but in the process of moving my drives over I had to swap their cables around a bunch until I got the right configuration where the remaining 5 good disks were seen as online. This process seems to have generated some checksum errors for the pool/raidz. I have the 5 remaining drives set up now and a good drive installed and ready to take the place of the drive that died. However, since my pool state is FAULTED I'm unable to do the replacement. root@zfs:~# zpool replace tank 1298243857915644462 /dev/sdb cannot open 'tank': pool is unavailable Is there any way to recover from this error? I would think that having 5 of the 6 drives online would be enough to rebuild the right data, but that doesn't seem to be enough now. Here's the status log of my pool: root@zfs:~# zpool status tank pool: tank state: FAULTED status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM tank FAULTED 0 0 1 corrupted data raidz1-0 ONLINE 0 0 8 sdd ONLINE 0 0 0 sdf ONLINE 0 0 0 sdh ONLINE 0 0 0 1298243857915644462 UNAVAIL 0 0 0 was /dev/sdb1 sde ONLINE 0 0 0 sdg ONLINE 0 0 0 Update (10/31): I tried to export and re-import the array a few times over the past week and wasn't successful. First I tried: zpool import -f -R /tank -N -o readonly=on -F tank That produced this error immediately: cannot import 'tank': I/O error Destroy and re-create the pool from a backup source. I added the '-X' option to the above command to try to make it check the transaction log. I let that run for about 48 hours before giving up because it had completely locked up my machine (I was unable to log in locally or via the network). Now I'm trying a simple zpool import tank command and that seems to run for a while with no output. I'll leave it running overnight to see if it outputs anything.

    Read the article

  • Windows Desktop Randomly Switches Resolution

    - by bobber205
    Once per log in a specific account, Windows XP is switching to 800x600 and 8 (looks like) bit color. It then after a few seconds switches back to the regular settings. This, so far, has only happened, once per log in session but it is becoming very annoying for the end user. :P Any ideas? I've tried turning off hardware acceleration as well as getting rid of her picture desktop wallpaper but nothing has made a difference. Thanks for any help!

    Read the article

  • Ubuntu Server upgrade over SSH hang

    - by Chris
    I was upgrading an Ubuntu server (using the do-release-upgrade) command over SSH (I know it's a bad idea, but it was the only choice; I don't have physical access to the server). It seemed to go fine and was going thru the 'setting up package name' part when it froze on the line Installing new version of config file /etc/mysql/debian-start ... The SSH connection appears to be still active, as pressing the up arrow echoes back ^[[A, and so on. When I log in on another SSH connection I can log in fine, but the ** system needs restart ** message shows up. Is it safe to ^C the release-upgrade command, or try to reboot the server? Should I ^C the upgrade and try it again? Anything else I could try?

    Read the article

  • User sees all Sharepoint document as being from 1938

    - by Ulys
    Hello, I currently have a problem I was unable to solve concerning Sharepoint. One of our user is seeing every file on Sharepoint as being from around 1938. The Created and Last Modified field are affected. When the user saves a file on his computer, the date is correct. If I log on his computer, the date are fine. If he log on my computer, the date are wrong once again, so it is linked to its Sharepoint account. The day and month are wrong to, but files uploaded 3 days apart are still 3 days apart for him. I don't see how anything could affect a date like that... Any help would be appreciated. Thanks, PS: Destroying his account and give him a new one is not a solution for now. He has been in this company for a long time and he has a lot of rights inherited from Sharepoint 2003 that are complicated to create.

    Read the article

  • Win7 XP mode install fails with cryptic error

    - by MAW74656
    Trying to install XPmode on Win7 Professional 64-bit SP1, but getting an error. I downloaded XPMode, Virtual PC and the update as specified here: http://www.microsoft.com/windows/virtual-pc/download.aspx. When I open XP mode for the first time it goes into the setup ("Setting up Windows XP Mode for first use..."; pick your VM password, etc.), then it runs through the progress bar until almost the end (99%?). At that point I get the error: Could not complete Setup. Please try again. Whats going on here? I've uninstalled Virtual PC and xpmode, and reinstalled in several different orders, no luck. Is there some log file that will tell me whats happening? Theres nothing showing up in the Event log that I can find. How can I fix this?

    Read the article

  • Ubuntu 12.04 issue installing Webmin modules (file does not exist)

    - by Arthur
    I'm running ubuntu 12.04. On this machine I have Webmin 1.580 installed. When trying to add a new module to Webmin I receive an error: "Failed to install module from : File does not exist" This happens when i go to Webmin Configuration Webmin Modules Select "Third party module from" Select "OpenVPN admin tool" and clicking on install module After I selected "OpenVPN admin tool" this url is being added: http://www.openit.it/downloads/OpenVPNadmin/openvpn-2.5.wbm.gz This URL resolves to a correct file. When uploading the file directly, the same error occurs. In the log file: /var/webmin/webmin.log nothing special is reported. How can I fix this issue? P.s. I run this server in CLI mode

    Read the article

  • When RDP as a Domain User, Smart Card Requested

    - by Paul
    My W8 machine is connected to domain zen. If I rdp to the W8 machine, I can log in as a local user without problems. If I try to log in as a domain user, I am prompted for a smart card instead of a password. Any ideas why? Note that Interactive login: require smart card is disabled in group policy: And here is the output from rsop.msc: Some additional information on this one. If my connecting machine is on the same domain/network as the W8 machine, then I am prompted for a password as usual. If the machine is remote, on a different domain, then I am prompted for a smart card. In addition, the machine I am connecting from that gets the smartcard prompt is an XP box. I haven't isolated exactly which of these factors triggers the different response.

    Read the article

  • VPC SSH port forward into private subnet

    - by CP510
    Ok, so I've been racking my brain for DAYS on this dilema. I have a VPC setup with a public subnet, and a private subnet. The NAT is in place of course. I can connect from SSH into a instance in the public subnet, as well as the NAT. I can even ssh connect to the private instance from the public instance. I changed the SSHD configuration on the private instance to accept both port 22 and an arbitrary port number 1300. That works fine. But I need to set it up so that I can connect to the private instance directly using the 1300 port number, ie. ssh -i keyfile.pem [email protected] -p 1300 and 1.2.3.4 should route it to the internal server 10.10.10.10. Now I heard iptables is the job for this, so I went ahead and researched and played around with some routing with that. These are the rules I have setup on the public instance (not the NAT). I didn't want to use the NAT for this since AWS apperantly pre-configures the NAT instances when you set them up and I heard using iptables can mess that up. *filter :INPUT ACCEPT [129:12186] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [84:10472] -A INPUT -i lo -j ACCEPT -A INPUT -i eth0 -p tcp -m state --state NEW -m tcp --dport 1300 -j ACCEPT -A INPUT -d 10.10.10.10/32 -p tcp -m limit --limit 5/min -j LOG --log-prefix "SSH Dropped: " -A FORWARD -d 10.10.10.10/32 -p tcp -m tcp --dport 1300 -j ACCEPT -A OUTPUT -o lo -j ACCEPT COMMIT # Completed on Wed Apr 17 04:19:29 2013 # Generated by iptables-save v1.4.12 on Wed Apr 17 04:19:29 2013 *nat :PREROUTING ACCEPT [2:104] :INPUT ACCEPT [2:104] :OUTPUT ACCEPT [6:681] :POSTROUTING ACCEPT [7:745] -A PREROUTING -i eth0 -p tcp -m tcp --dport 1300 -j DNAT --to-destination 10.10.10.10:1300 -A POSTROUTING -p tcp -m tcp --dport 1300 -j MASQUERADE COMMIT So when I try this from home. It just times out. No connection refused messages or anything. And I can't seem to find any log messages about dropped packets. My security groups and ACL settings allow communications on these ports in both directions in both subnets and on the NAT. I'm at a loss. What am I doing wrong?

    Read the article

  • Crash/Instance Recovery?Media Recovery?????

    - by Liu Maclean(???)
    Crash/Instance Recovery?Media Recovery???????: Crash/Instance Recovery???????????????(incremental checkpoint)??apply redo??????????????????????????logfile switch checkpoint,?????????????????????,????crash/instance recovery???????????????????????(online redo logfile)? ????Media Recovery????????????apply redo??????,???????????????? ?????????????????,??RMAN?DBA(???????)?????????????????? Crash/Instance Recovery??????????????????????????? ?Oracle??????????????????????,??????????????? ??,??????????(incomplete recovery)?????(partial recovery)???,????????(db)??????????? Crash/Instance Recovery?Media Recovery??????: Crash/Instance Recovery?Media Recovery???????????(rolling forward),????????redo log?????? ???Crash/Instance Recovery??Media Recovery???,????????????????????,???????????????????????,????????????????????????? ????: ????????SMON??(?):Recover Dead transaction????Oracle????rolling forward(?)????????SMON??(?):Instance Recovery

    Read the article

  • Handling expected supervisord exit codes

    - by Mulkave
    I am using supervisord inside a Docker container to manage my running processes and would like to also use it to trigger certain commands - run them once and expect them to exit with 0. Here's one example: [program:central-seed-posts] command = /usr/bin/php /var/www/app/artisan post autostart = false autorestart = false startsecs = 3 startretries = 0 exitcodes = 0 stderr_logfile=/tmp/central/posts-stderr-supervisor.log stdout_logfile=/tmp/central/posts-stdout-supervisor.log And I'm using nsenter's docker-enter with supervisorctl start central-seed-posts to trigger it but I would also like to handle a successful exit instead of supervisor telling me ERROR (abnormal termination) Does it have to do with supervisor events ?

    Read the article

  • caches domain user on local PC

    - by user630320
    We have a fully working domain in UK and around the world we have user who use VPN ( checkpoint) to connect to or domain. One of the user in USA has a laptop which he never logged on to before ( it does caches the user login details). Does anyone know how to cache user login information on this laptop. I have tried netdom trust to add this user to the laptop but i was not able to do this. At the moment user is logging in with a local administrator account and then using VPN to log on to our domain but when it comes to accessing files on domain user get access deieded. When user try to login it gets There are currently no log on servers available to service the logon request Does anyone know how to add user.

    Read the article

  • What statistics app should I use for my website?

    - by Camran
    I have my own server (with root access). I need statistics of users who visit my website etc etc... I have looked at an app called Webalyzer... Is this a good choice? I run apache2 on a Ubuntu 9 system... If you know of any good statistics apps for servers please let me know. And a follow-up question: All statistics are saved in log-files right? So how large would these log-files become then? Possibility to split them would be good, dont know if this is possible with Webalyzer though...

    Read the article

  • snort-mysql not starting on Ubuntu server

    - by Rsaesha
    I am following this tutorial: https://help.ubuntu.com/community/SnortIDS I've set up the database, everything has installed correctly, and I've configured the snort.conf file so it outputs to a database (with creds all filled out ok). When I run /etc/init.d/snort start, it fails but does not produce any error message other than [fail]. The last few lines of /var/log/syslog are: snort[5687]: database: must enter database name in configuration file#012 snort[5687]: FATAL ERROR: My output database line in the snort.conf file is: output database: log, mysql, user=snort password=... dbname=snort host=localhost I have tried it with the commas separating everything, putting quotes around stuff, etc. The password is only made up of letters (after I thought maybe a number was throwing it off).

    Read the article

< Previous Page | 260 261 262 263 264 265 266 267 268 269 270 271  | Next Page >