Search Results

Search found 18433 results on 738 pages for 'tfs power tools'.

Page 266/738 | < Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >

  • New Computer freezing up at random

    - by Benjamin Frost
    Since I built my system about 4 weeks ago I'v been getting random freezes, Sometimes it can happen directly after startup and sometimes it wont freeze up for 3-4 days of 24/7 running. It seems to be happening under all stress loads but mainly when the CPU is under 10% load. It doesn't give me a BSOD or anything, it simply just freezes and repeats the last sound before the freeze until I shut it down by the power button. I'v re-seated everything in the system except the CPU, Cleaned the RAM sockets and gold fittings. None of the components have been clocked above their factory settings as of yet, don't want to overclock them until I sort out these freezes. Temps are all well under the rated max temps, the highest the temps have been are below CPU: Low load: 16-21°C Full Load (100%) 40-43°C *(From HWMonitor by CPUID) GPU 1: Low Load: 25-30°C Full Load (100%): 45-50°C GPU 2: Low Load: 23-27°C Full Load (100%): 45-50°C *(GPU Temps from Catalyst Control Center) General Case temps Rear: 18-20°C Mid: 20-21°C Front (HDD/SSD Bays): 14-19°C (Case temps may be a little off as it's from the Kaze master pro fan controller) I have Un-installed EVERY driver for Motherboard, GPU & Soundcard and Re-installed twice. Windows is all up to date. To date i'v tried the following Running Memtest for 24 hrs straight, No errors Running Memtest on each individual RAM modules, No errors Reseated everything except the CPU Cleaned DIMM Sockets and Gold inputs Tested the Graphics cards 1 at a time Re-arranged all the SATA devices to run on Chipset controlled ports Re-installing all drivers OS: Win7 Professional 64bit Motherboard: ASRock X79 Extreme9 CPU: i7 3930k 3.2GHz GPU: Sapphire 7950 OC Edition V2 (2 card Crossfire) RAM: G.Skill Ripjaws Z F3-17000CL11Q-16GBZL 16GB (4x4GB) DDR3 Boot Drive: OCZ Agility 4 128GB Data Drive 1: Western Digital Black 2TB Data Drive 2: Western Digital Black 2TB Data Drive 3: Western Digital Green 3TB Power Supply: Corsair AX1200 Gold

    Read the article

  • Rack layout for future growth

    - by bleything
    We're getting ready to move to a new colo facility and I'm designing the rack layout. While we have a full rack, we only have 12U worth of hardware right now: 1x 1U switch 7x 1U servers 1x 2U server 1x 2U disk shelf The colo facility requires us to front-mount the switch and use a 1U brush strip, so we'll be using a total of 13U of space. Regarding growth, I'm reasonably sure we'll be adding another 4U in servers, 1-2U of network gear, and 2-4U of storage in the mid-term. Specific questions I'm hoping to get help with: where should I mount the switch? the LEDs are on top... should I group the servers by function with space for adding new machines? as an alternative, should I group servers based on whether they are production or staging? where in the rack should I start? in the middle? at the top? at the bottom? equally spaced? Here's a silly little ASCII diagram of what I'm thinking right now. Please feel free to tear my design apart, I've really no idea what I'm doing :) Any advice is very welcome. edit: to be clear, the colo is providing redundant power with UPS and generator, so that's why there's no power gear in the plan, except for the 0U PDU that I didn't diagram. 42 | -- switch ---------------------- 41 | -- brush strip ----------------- 40 | ~~ reserved for second switch ~~ 39 | ~~ reserved for firewall ~~~~~~~ 38 | 37 | -- admin01 --------------------- 36 | 35 | -- vm01 ------------------------ 34 | -- vm02 ------------------------ 33 | ~~ reserved for vm03 ~~~~~~~~~~~ 32 | ~~ reserved for vm04 ~~~~~~~~~~~ 31 | ~~ reserved for vm05 ~~~~~~~~~~~ 30 | 29 | -- web01 ----------------------- 28 | -- web02 ----------------------- 27 | ~~ reserved for web03 ~~~~~~~~~~ 26 | ~~ reserved for web04 ~~~~~~~~~~ 25 | 24 | 23 | 22 | 21 | 20 | 19 | 18 | 17 | 16 | -- db01 ------------------------ 15 | +- disks ----------------------+ 14 | +------------------------------+ 13 | ~~ reserved for more ~~~~~~~~~~~ 12 | ~~ db01 disks ~~~~~~~~~~~~~~~~~~ 11 | 10 | +- db02 -----------------------+ 9 | +------------------------------+ 8 | ~~ reserved for db02 ~~~~~~~~~~~ 7 | ~~ disks ~~~~~~~~~~~~~~~~~~~~~~~ 6 | ~~ reserved for more ~~~~~~~~~~~ 5 | ~~ db02 disks ~~~~~~~~~~~~~~~~~~ 4 | 3 | 2 | 1 |

    Read the article

  • Linux machine can't find its tape drive

    - by Kyle Hodgson
    I have an older HP NetServer LPr with what is apparently a Symbios SCSI card connecting to a Quantum SuperLoader 3 that is DLT based. From time to time, we seem to lose the connection to the autoloader. It's usually due to flaky power, but not totally sure why; sometimes when this happens the Autoloader's LED's are orange and it needs to be power cycled. The annoying workaround currently is to reboot the machine. As it is our production VPN and DNS server in addition to being our backup server, this is less than optimal. In Debian (Sarge) is there not some command one can type to get the card to notice that it has the autoloader connected again? dcr1:/proc# grep -i symbios /proc/pci SCSI storage controller: LSI Logic / Symbios Logic 53c895 (rev 1). dcr1:/proc# uname -a Linux dcr1 2.4.27-3-686 #1 Tue Dec 5 21:03:54 UTC 2006 i686 GNU/Linux dcr1:/proc# mt status mt: /dev/tape: No such device dcr1:/proc# ls -l /dev/tape lrwxrwxrwx 1 root root 8 2007-02-07 16:01 /dev/tape -> /dev/st0 dcr1:/proc# That mt status command will show the actual st0 status when things are working correctly. The No such device message is usually the second clue that we need to reboot - the first clue is usually that the backups didn't run.

    Read the article

  • Acer Aspire One (mini) mfgd 9/03 locks up also when plugged in

    - by LAURIE ANN
    My problem is almost the same as the Toshiba user (Toshiba A205-5804 freezes when plugged in): Well I have a Toshiba A205-5804 and the problem is that the screen freezes anytime I plug the pc into the external power supply, not as most of the computers having the same issue, my computer DOES freeze in safe mode, and I really can't bear this problem for much longer... It's not an overheat problem, the computer is not getting hot or anything related, I've tried already to change the AC adapter, to boot only with AC and no battery, and also all of these suggestions: The only difference in my case is: I can be using the battery and when it runs down, I can just close the lid and the system goes into hibernation mode. I then plug it in and let it charge. When I think it's finally charged, I can UNPLUG it, open the lid and all is running fine on the battery again. Note: the system was NOT shut down and it still runs as long as I remove the power plug before opening the lid. I have ALL the same issues as the other Toshiba user, also. I was a tech for 9 yrs in my own business and this one has not only stumped me, but anyone I have asked has never heard of this problem. Every repair center wants to charge me for diagnosis, even is they cannot fix it. I would really like to run this system along side of my new Acer Aspire 17" laptop as I need it to finish my grad school work. Any ideas would be GREATLY appreciated. Thanx, Laurie Ann

    Read the article

  • Windows CE restores default configuration after restart (Motorola MC3190)

    - by jarek
    Good morning, everyone! I have a problem with Motorola MC3190 hand scanner running on Windows CE. I've got few of those to make a new program for some kind of warehouse. There is already installed program which have been used by the customers before, so I delete this one and instead I install my new software which I've just made. It is running very well, but when I take out the battery and leave the device for entire night without power supply, it restores the whole configuration, so the old program is back, the wireless configuration is back and... Yeah. The scanner is restored to the configuration which was running when I received it few weeks ago. What I want to do is to set the whole configuration of the scanner so after a long power-off my program and my configuration will be restored. I truly believe someone knows how to do it. The time is running out, and I believe that the customer will be kind of annoyed when he will change the battery and the program which he bought will be gone. ;-) Regards, Jarek

    Read the article

  • Why does cpuinfo report that my frequency is slower?

    - by Avery Chan
    My machine is running off of a AMD Sempron(tm) X2 190 Processor. According the marketing copy, it should be running at around 2.5 Ghz. Why is the cpu speed being reported as something lower? Spec description (in Chinese) $ cat /proc/cpuinfo processor : 0 vendor_id : AuthenticAMD cpu family : 16 model : 6 model name : AMD Sempron(tm) X2 190 Processor stepping : 3 microcode : 0x10000c8 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 apicid : 0 initial apicid : 0 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save bogomips : 5022.89 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate processor : 1 vendor_id : AuthenticAMD cpu family : 16 model : 6 model name : AMD Sempron(tm) X2 190 Processor stepping : 3 microcode : 0x10000c8 cpu MHz : 800.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 apicid : 1 initial apicid : 1 fpu : yes fpu_exception : yes cpuid level : 5 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm 3dnowext 3dnow constant_tsc rep_good nopl nonstop_tsc extd_apicid pni monitor cx16 popcnt lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs skinit wdt npt lbrv svm_lock nrip_save bogomips : 5022.82 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 48 bits physical, 48 bits virtual power management: ts ttp tm stc 100mhzsteps hwpstate

    Read the article

  • What parts should I get for an ASRock x58 Extreme motherboard

    - by Brad Gilbert
    I just received an ASRock x58 Extreme motherboard, for my post on this question. It was a 2009 Tom's Hardware recommended buy. It is a Core i7 motherboard, with an X58 Express Chipset. It uses DDR3 RAM. What I want to know is, what parts should I get to finish it off. I'm looking for some good bargains, because of a lack of funds. The most taxing game I will probably play on it is OpenTTD. The only parts I currently have that are compatible: A Dynex 400W power supply. It appears to be an ATX 2.1 power supply, with the addition of a -5 rail. Apparently designed to be compatible with most ATX-style motherboards. Several PCI add-in cards. Mostly 10/100 Network cards Some sound cards Some video cards with a VGA connector Plenty of PATA drives. 8 GB - 80 GB Hard-drives A dozen or-so CD-ROM drives, only a handful of them are CD-RW drives. One DVD-ROM drive I have one LCD, with a 15 pin VGA connector, which I salvaged from the dump. The only thing wrong with it was some dead capacitors. It also has a stuck pixel.

    Read the article

  • Asus n61Ja notebook bios update

    - by zKs
    I wanted to update the bios, with an official bios update, from version 207 to 211. I didn't use winflash, I used easyflash in the bios. Everything seemed to be going okay; it deleted the old files, wrote the new ones, verified the new ones. Then it said: shutdown in/after 2 seconds and it shut down. Then nothing happened anymore. Power button completely unresponsive. The battery light was still on, and I'm not sure if I should've just waited... I didn't though, I thought I had to remove the battery, take the power off completely to be able to start it up again. So I'm wondering: what are my options here? My warranty expired and I don't really have the money to send it in and pay hundreds of bucks on repairs. Is there anything I can try? CMOS battery reset? Anything??? Please help me out! I would be very grateful :) ps. What was sort of odd btw, was that easyflash said something like that it was an unsigned bios and if I wanted to flash it anymore, if i wanted to 'force' it or something. It was with 100% certainty the correct update from the Asus.com support site, so I didn't take that 'warning' seriously.

    Read the article

  • How can i get more low memory with the following setup:

    - by user539484
    Modules using memory below 1 MB: Name Total = Conventional + Upper Memory -------- ---------------- ---------------- ---------------- MSDOS 14 317 (14K) 14 317 (14K) 0 (0K) HIMEM 1 120 (1K) 1 120 (1K) 0 (0K) EMM386 3 120 (3K) 3 120 (3K) 0 (0K) OAKCDROM 36 064 (35K) 36 064 (35K) 0 (0K) POWER 80 (0K) 80 (0K) 0 (0K) NLSFUNC 2 784 (3K) 2 784 (3K) 0 (0K) COMMAND 2 928 (3K) 2 928 (3K) 0 (0K) MSCDEX 15 712 (15K) 15 712 (15K) 0 (0K) SMARTDRV 30 384 (30K) 13 984 (14K) 16 400 (16K) KEYB 6 752 (7K) 6 752 (7K) 0 (0K) MOUSE 17 296 (17K) 17 296 (17K) 0 (0K) DISPLAY 8 336 (8K) 0 (0K) 8 336 (8K) SETVER 512 (1K) 0 (0K) 512 (1K) DOSKEY 4 144 (4K) 0 (0K) 4 144 (4K) POWER 4 672 (5K) 0 (0K) 4 672 (5K) Free 552 944 (540K) 539 088 (526K) 13 856 (14K) Memory Summary: Type of Memory Total = Used + Free ---------------- ---------- ---------- ---------- Conventional 653 312 114 224 539 088 Upper 47 920 34 064 13 856 Reserved 0 0 0 Extended (XMS)* 64 898 256 2 671 824 62 226 432 ---------------- ---------- ---------- ---------- Total memory 65 599 488 2 820 112 62 779 376 Total under 1 MB 701 232 148 288 552 944 Total Expanded (EMS) 33 947 648 (33 152K Free Expanded (EMS)* 33 538 048 (32 752K * EMM386 is using XMS memory to simulate EMS memory as needed. Free EMS memory may change as free XMS memory changes. Largest executable program size 538 976 (526K) Largest free upper memory block 7 488 (7K) MS-DOS is resident in the high memory area. I'm running MS-DOS 6.22 on VMWare virtual hardware. This is memory state after memmaker pass, so i'm looking for optimization beyond memmaker. Note: NLS drivers (DISPLAY, KEYB, NSLFUNC) are essential for me. Thanks to @mtone for valuable reminder about MSCDEX /E which gave me 16KiB of low memory (see the diff)!

    Read the article

  • How do I upgrade the BIOS to boot the motherboard when the CPU is not suported?

    - by Matt
    So I have a Tyan S8225 motherboard with a Valencia (Opteron 4200) CPU. Two of us have tried everything. We have even swapped the whole motherboard, Power supply, memory, even a different CPU (still Valencia). We even tried it without any memory installed and with only a single CPU. There are no beep codes as I suspect even those are controlled by the BIOS boot process. We put the whole thing on the bench with just the power supply, VGA, keyboard and network (for IPMI) connected. The IPMI is not even showing the BIOS starting, but the IPMI is working. After some hunting around, I discovered the claim on the website is that the Valencia CPU's are not supported on older BIOS revisions. For a start, I don't know what the bios revision is and if it's older but it's the only thing left. Could the BIOS be causing a board not to boot at all? If that's the case, then is there any other way to update the BIOS without buying an old CPU only to be put back in a box just to update the BIOS? Yes, we even tried updating the BIOS through IPMI but you can't do that either.

    Read the article

  • New XPC: No video, no ethernet link, but drive spins

    - by Mike Pennington
    I bought a Shuttle XPC SH67H3 with integrated video. I installed: An Intel i5 2450P 16GB DDR3 RAM A SATA hard drive from my old linux server that still is bootable I have both power connectors plugged into the motherboard. I realize that the Intel i5-2450P doesn't have video capabilities; however, the drive spins like it's doing something useful. It seems like I should get an ethernet link light when I fire this up. I plan to run this headless anyway, so it would be really nice if I could figure out how to run this without a video card at all. I know the IP address and login info for the linux install on the disk. I plugged in speakers, but get no bios beeps when I power it up. Shuttle's bios manual has nothing in there that indicates I should have problems in this configuration. My questions: Is there a reason that the missing video card would block usage of the ethernet port? Are there settings on the motherboard / bios I can change to get this working?

    Read the article

  • restoring a failed SBS 2000 box...

    - by Brad Pears
    Hi there, I read a post where you had mentioned you have had a PERC card blow up on you in an SBS box... I've got a similar situation where one of my RAID drives failed and then the power supply failed before I could replace the drive... I then replaced the power supply and the failed drive and reconfigured the RAID array. I had a recent full backup of the my Win2k SBS's C: drive stored on my SYmantec backup exec server so I installed win2K server on the c: partition and then once I had that up and running, installed the backup exec agent so as to do a restore of the entire c drive including system state. THis all worked just fine, until I had to reboot. I received an "incorrect drive configuration" error and then it hangs. I figure that likely makes sense becasue I think my RAID array is configured slightly different now in that the partitions may be sizeded ever so slightly differently now than they were before I think... Is there a way I can just restore from my backup BUT maybe exclude some of the registry and hidden boot files it wants to restore so that it is booting with the current configuration now active on that machine - not the pre blow up configuration files? I also read a post that indicated you might have to install the exact same service pack etc... etc.. before attemting a restore but that does not make sense to me being as the entire c drive contents are going to be overwritten by the restore anyway? THe basic OS install is just to be able to get the backup exec agent installed . I can;t understand why one would need to install the exact same SP level. CAn you shed some light on what I might be able to do to get this thing up and running? Thanks,Brad

    Read the article

  • Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

    - by Kairan
    Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

    Read the article

  • Dell XPS m1530 system cannot boot need 130w or greater

    - by KPS
    I have a Dell XPS M1530 and I lost my old AC adapter but ordered a new one. For the longest time it always had a battery charge so I was able to boot into the OS but now it is completely dead. I have a generic charger that slowly charged the laptop when it was in the OS but does not when the computer is off. When I boot up I get the following error: The AC power adapter type cannot be determined. The system can only boot with a 130 W power adapter or greater. Strike F1 key to shutdown. I cannot even enter the BIOs setup screen or boot menu, is there a way around this? I heard from the local tech that Dell has a special feature to boot from thumb drive before getting past the initial logo. I am doing my best to avoid purchasing a new charger since it worked just fine when the OS was running, I am hoping to get this thing going. Is there a way to charge the battery externally? Thanks in advance for any help!

    Read the article

  • VMware Workstation reboot 32-bit host when starting 64-bit guest

    - by Powerman
    I'm trying to start 64-bit guest (MacOSX and Windows7) on 32-bit host (Hardened Gentoo Linux, kernel 2.6.28-hardened-r9) using VMware Workstation (6.5.3.185404 and 7.0.1.227600). If VT-X disabled in BIOS, VMware refuse to start 64-bit guest (as expected). If VT-X enabled in BIOS, VMware start guest without complaining, but then, in about a second (I suppose as soon as guest try to switch on 64-bit) my host reboots (actually, it's more like reset - normal reboot procedure skipped and BIOS POST start immediately). My hardware is Core 2 Duo 6600 on ASUS P5B-Deluxe with latest stable BIOS 1101. I've power-cycled system, then enabled Vanderpool in BIOS. My CPU doesn't support Trusted Execution Technology, and there no way to disable it in BIOS. I've rebooted several times after that, sometimes with power-cycled, and ensure Vandertool is enabled in BIOS. I've also run VMware-guest64check-5.5.0-18463 tool, and it report "This host is capable of running a 64-bit guest operating system under this VMware product.". About a year ago I tried to disable hardened in kernel to ensure this isn't because of PaX/GrSecurity, but that doesn't help. I have not checked 32-bit guests with VT-X enabled yet, but without VT-X they works ok. ASUS provide "beta" BIOS updates, but according to their descriptions these updates doesn't fix this issue, so I'm not sure is it good idea to try it. My best guess now it's motherboard/BIOS bug. Any ideas?

    Read the article

  • Using smartctl to get vendor specific Attributes from ssd drive behind a SmartArray P410 controller

    - by Lairsdragon
    Recently I have deployed some HP server with SSD's behind a SmartArray P410 controller. While not official supported from HP the server work well sofar. Now I like to get wear level info's, error statistics etc from the drive. While the SA P410 supports a passthru of the SMART Command to a single drive in the array the output I was not able to the the interesting things from the drive. In this case especially the value the Wear level indicator is from interest for me (Attr.ID 233), but this is ony present if the drive is directly attanched to a SATA Controller. smartctl on directly connected ssd: # smartctl -A /dev/sda smartctl version 5.38 [x86_64-unknown-linux-gnu] Copyright (C) 2002-8 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Attributes Data Structure revision number: 5 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 3 Spin_Up_Time 0x0000 100 000 000 Old_age Offline In_the_past 0 4 Start_Stop_Count 0x0000 100 000 000 Old_age Offline In_the_past 0 5 Reallocated_Sector_Ct 0x0002 100 100 000 Old_age Always - 0 9 Power_On_Hours 0x0002 100 100 000 Old_age Always - 8561 12 Power_Cycle_Count 0x0002 100 100 000 Old_age Always - 55 192 Power-Off_Retract_Count 0x0002 100 100 000 Old_age Always - 29 232 Unknown_Attribute 0x0003 100 100 010 Pre-fail Always - 0 233 Unknown_Attribute 0x0002 088 088 000 Old_age Always - 0 225 Load_Cycle_Count 0x0000 198 198 000 Old_age Offline - 508509 226 Load-in_Time 0x0002 255 000 000 Old_age Always In_the_past 0 227 Torq-amp_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 228 Power-off_Retract_Count 0x0002 000 000 000 Old_age Always FAILING_NOW 0 smartctl on P410 connected ssd: # ./smartctl -A -d cciss,0 /dev/cciss/c1d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net (Right, it is complety empty) smartctl on P410 connected hdd: # ./smartctl -A -d cciss,0 /dev/cciss/c0d0 smartctl 5.39.1 2010-01-28 r3054 [x86_64-unknown-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net Current Drive Temperature: 27 C Drive Trip Temperature: 68 C Vendor (Seagate) cache information Blocks sent to initiator = 1871654030 Blocks received from initiator = 1360012929 Blocks read from cache and sent to initiator = 2178203797 Number of read and write commands whose size <= segment size = 46052239 Number of read and write commands whose size > segment size = 0 Vendor (Seagate/Hitachi) factory information number of hours powered up = 3363.25 number of minutes until next internal SMART test = 12 Do I hunt here a bug, or is this a limitation of the p410 SMART cmd Passthru?

    Read the article

  • Why does USB thumb drive screw up boot sequence?

    - by Carl B
    I am looking for understanding to a boot issue. I have at times had some files and such that I save and retrieve from my thumb drive. I use the front panel as it is nice and easy to get to and I typically power down my system nightly. If I forget to pull the drive and power on the system, it becomes the first bootable device. As there is no OS on the USB Drive I get the BOOTMGR is missing press CTRL+ALT+DELETE. When I go into BIOS to see Boot sequence, there’s the thumb drive up top, DVD drive is missing and not found in the list of devices. All of the hard drives are next in line. When I pull the USB drive, and reboot, everything is back to normal. Old boot sequence is in place, DVD drive right where it should be and no issues. So why does this happen with a USB drive in port at boot up? If it can’t be booted from, shouldn’t the next drive be attempted? Note: This happens when the thumb drive is plugged into a USB port on the front panel. It does not seem to happen on rear panel ports.

    Read the article

  • graphics performance better on battery?

    - by Scott Beeson
    Anyone have any idea why my laptop would perform (considerably) better while on battery than while plugged in? It's a Dell Latitude E6420 with Windows 8 Pro. I tried mirroring all the settings in the selected power plan from "On battery" to "Plugged In" and that didn't help. I then just restored the defaults for all power plans (balanced and high performance). I'm still seeing the same results. The best example where it is most noticeable (don't laugh) is Sim City Social in Chrome. I'm probably seeing a performance increase of 5x on battery versus plugged in. This is easily reproducible too. I'm very confused. Could it be caused by dust? The laptop isn't that old and there is no visible dust. I'm not going to take it apart to check the insides as it's a corporate laptop. Could it be overheating? Battery Sim City Social: 68 degrees max Civ V: 77 degrees max Charger Sim City Social: 68 Civ V: did not test See answer below... I'm retarded

    Read the article

  • How to run the CPU at something like 75%?

    - by Tobias Kienzler
    My notebook is too old for me to invest into a new fan (it will simply be replaced by a new one when the final heat death occurs), but when it runs on full speed I feel like sitting in front of a vacuum cleaner with integrated cooking... I'm currently using NHC, the Max Battery mode of which let's the CPU run at 50% (~800 MHz). That's fine for most applications, and both temperature and noise remain low. However, on some occasions I need a bit more speed, more around 75% maybe. Can I set the power saving settings somehow so that the CPU won't surpass 75% of it's capability so that an acceptable compromise between power and noise is achieved? I can't set the CPU frequency in the BIOS and since on rare occasions I'd like to be able to switch to 100% without much hassling, hardware solutions like setting jumpers are no option. This answer to a similar (linux!) question mentions NHC should be able to offer these options, but for me they are all greyed out: The notebook is an Asus Z9200K, I guess NHC doesn't support its chipset enough for these advanced options.

    Read the article

  • What does "cpuid level" means ? Asking just for curiosity

    - by ogzylz
    For example, I put just 2 core info of a 16 core machine. What does "cpuid level : 6" line means? If u can provide info about lines "bogomips : 5992.10" and "clflush size : 64" I will be appreciated ------------- processor : 0 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 0 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5992.10 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management: processor : 1 vendor_id : GenuineIntel cpu family : 15 model : 6 model name : Intel(R) Xeon(TM) CPU 3.00GHz stepping : 8 cpu MHz : 2992.689 cache size : 4096 KB physical id : 1 siblings : 4 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 6 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm syscall nx lm constant_tsc pni monitor ds_cpl vmx cid cx16 xtpr lahf_lm bogomips : 5985.23 clflush size : 64 cache_alignment : 128 address sizes : 40 bits physical, 48 bits virtual power management:

    Read the article

  • iPhone Lag Terrible - SLOW - What's going on with the iPhone OS?

    - by Sam Schutte
    I've had my iPhone 3G for about a year now, and it seems like at least once a month, it gets bogged down and gets slower and slower - horrible lag when typing, going back to the home screen or opening an app can take 20 seconds. Has anyone else run into this and found "the" solution. What you always read on other boards is to reboot the handset (hold down home and the power button), but that doesn't improve anything for me. I've reinstalled the OS like 5 times now, and I'm getting pretty sick of doing it so often. And I don't buy that it's a hardware issue really, since it works fine for weeks after a fresh install. Anyone have a solution or an idea of what specific actions cause this kind of evident data corruption (OS corruption?) and slowness? Note - I'm looking for specific things here. That is, has anyone done the research to see exactly what on the phone operating system is getting messed up that causes this lag (which is discussed all over the internet, with no working solutions). I don't own a mac, so I can't delve into the guts of the iPhone very well to see what's up with it... Some additional info: Reboots (hold down power/home) and "Sleeps" (slide off) do nothing. Only fresh re-installs help I only have about 15 apps installed - sometimes you see the answer to uninstall apps if you have too many, I'd hope that 15 isn't too many, and even when I've had none installed, it still gets hung up after a period of time. This phone is not jailbroken, and it is running the 3.0.1 release.

    Read the article

  • How to forceably unmount stuck network share in Mac OS X?

    - by Kyle Lowry
    Not long ago my Xserve failed (power loss) while an iMac was working with files on a particular network share (called "Work Share"). This volume, "Work Share", is now stuck. It can't be seen in the GUI, you can only detect it using the Terminal. Even after power cycling over the course of several days, ls -a still shows that it's there, but I can't unmount it using any command - not even as root in single user mode. Every time I attempt to unmount that volume, I get the message that the resource is busy (which it can't possibly be since nothing is using it), and error code 4915. The issue is that when I mount the real "Work Share", it internally is renamed to "Work Share-1", which breaks all my links, and several files in the share. If I can't unmount the false "Work Share", then that computer would be unuseable without a reformat, I would imagine - and I don't want it to have to come to that. I've tried everything I can think of - it looks like sudo can't save me now. Any ideas on how to unmount this stuck volume?

    Read the article

  • Linksys wireless router will not hardware reset.

    - by Jack M.
    Hello, all. I'm unable to make my router perform a hardware reset, and I cannot understand why. All was working well, except that my iPhone could not connect to the wireless. I found that the router was only allowing AES encryption on WPA2 Personal mode, so I upgraded the firmware. I updated the firmware to Ver.1.06.1, and everything went screwy. The router is no longer showing up in the WiFi list (as Linksys, or its previous network name). Wiring into the router gives me an IP address from my ISP (24.121.121.XXX). Attempting to do a hardware reset, but the power light never starts flashing and the router does not seem to reboot. My machine wired in is still online with no interruption in WoW. Pulling the power cord to force a reset returns it to the same state. I even went so far as to pull up my previous IP address (from DynDNS) and try to connect to that, but it wont even ping. What I'm trying to find out is: Did the new firmware fry the thing, or is there some way to fix this? Thanks in advance for any help.

    Read the article

  • tod to avi mpg wmv, convert tod (.mpeg-2) to avi mpg wmv for Movie Maker.

    - by yearofhao
    Need to convert .tod (mpeg-2) to avi mpg wmv download from JVC Everio to PC with tod to avi mpg wmv converter convert tod to uncompressed/raw avi, mpg wmv Have a JVC Everio camcorder? Then you may encounter problems when saving the .tod files to your computer windows movie maker says it can't recognize and edit them to make videos. You may play them using media player but the problem is how to edit them? The bundled software Power cinema could be annoying, since you can only edit when the camera is plugged in to the PC - Power cinema can’t seem to edit from the saved clips alone. So, how do you save them to PC so that you can edit them without the camera and also using windows movie maker? JVC Everio Tod to avi mpg wmv converter costs you a penny to but help you perfectly convert tod file to AVI, MPG, WMV, YouTube FLV, MP4, DV, QuickTime.MOV or other common video formats with fast speed and while keeping the original HD quality. High definition TOD recordings from JVC Camcorders can playback fluidly, convert smoothly and edit professionally on with iOrgsoft TOD file converter iOrgsoft tod to avi mpg wmv Converter has been mostly used by Windows users who use Windows 7 or Vista, after the .tod (mpeg-2 the same codec) downloaded from JVC Everio to PC, it’s best to convert tod to avi, convert to xvid divx, convert tod to uncompressed avi or convert tod to raw avi, tod to mpg, tod to wmv, which are three Windows movie maker best formats to import. TOD to avi mpg wmv converter is a competent video-editing program that allows you to clip/cut TOD video clip, crop the video to encode, and help transfers video to devices like iPhone, iPod, to HDTV connected with Apple TV.

    Read the article

  • vmware vmdk disk problem

    - by dmtr
    Hello, I have a vmware esxi 4 server and 2 storage servers (mount as nfs). Between the storage servers (fedora 14) is made drbd cluster (dual primary) and ocfs2 filesystem, also every server has local partition with ext4 filesystem, both are mounted as nfs on esxi server. When i tried to copy a virtual machine (naturally it power off) files from ext4 partition to ocfs2 partition, vmdk total file size is different, but md5sum is the same. on ext4 partition: # ls -la total 28492228 -rw------- 1 root root 42949672960 Jan 14 14:46 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 on ocfs2 partition: # ls -la total 13974660 -rw------- 1 root root 42949672960 Jan 14 16:16 disk-flat.vmdk # md5sum disk-flat.vmdk 0eaebe3138beb32f54ea5de6dfe5a987 When i power on the virtual machine from ocfs2 partition it dosn't work. I have a windows on the virtual machine and it freez?s after windows logo. From ext4 partition the virtual machine is worked. Test with linux (create and install on ext4 partition and copy) the same problem appears. When i create a virtual machine directly from ocfs2 partition, there are no problems. I tried to copy via vSphere client, and i have the same problem. Any suggestions ?

    Read the article

< Previous Page | 262 263 264 265 266 267 268 269 270 271 272 273  | Next Page >