Search Results

Search found 8369 results on 335 pages for 'company'.

Page 269/335 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

• How to configure Farsun USB barcode scanner to not auto-trigger

  - by David Grayson

  At my company we have several USB barcode scanners. I'm not sure exactly what model they are, but I think they are the FG9800 from Farsun because that's what they look like on the exterior. They came with a programming manual that is very similar to this document from the Farsun website. When I scan the "Output Firmware Version" barcode, my scanner types the following into the computer: Farsun V2.00 2011-01-01 Is it possible to configure these scanners so they only read barcodes in response to the trigger button being pressed? I don't want them to automatically read barcodes. Additionally, I want this setting to be remembered while the scanner is turned off. Since this scanner only has a USB port, the only way to configure it that I know of is to scan bar codes from the manual (or make your own). I have tried scanning the configuration bar codes for Single Scan (013300), Single Scan No Trigger (013301), and Laser/CCD Timeout - 5 Seconds (0134005) from this document. Sometimes (but not often) this puts the scanner in to the right mode, where it only scans when the button is pressed. Unfortunately, the scanner seems to always leave this mode when it is power cycled. I have also scanned the "Reset Configuration To Defaults" barcode (0B) many times. We have three different scanners like this and I have not been able to successfully configure any of them. If the things I want are not possible with these Farsun-based scanners, is there some other scanner we can use?

  Read the article

• Citrix Access Gateway with Citrix Receiver

  - by vm370

  I'm currently using a Citrix Access Gateway with firmware 5.0.4 to provide access over an SSL-VPN to an isolated environment, which is connected to over the Citrix Access Gateway Client, which is delivered by the device by default. However we encountered different problems, e.g. that it's somehow not possible to get it out of the autostart (not registered as a service or in the autostart?!) and it killed the Cisco VPN Client, which is used in the company and unfortunately cannot be replaced. The Cisco client can also just be used again after a procedure with cleaning the registry from all CAG Client remains, which requires a lot of effort. Because of that, I'd like to check if there is an alternative to this client, since is this is a real pain... Unfortunately I couldn't find a way to use the Receiver with the CAG yet, but if you have any resources on how to build this workaround, I'd be very happy. Thanks a lot in advance UPDATE: If there are other alternatives I'd be even more happy, since using the Receiver would also mean that there is an issue with the ICA-Client, which is also used in our environments. From my experience, the Receiver and the ICA-Client are also no good friends...

  Read the article

• Windows 2003 DNS or IIS6 Problem?

  - by Mario

  Weird DNS problem... We have an intranet located internally on a windows 2003 / iis6 server - DNS handled internally on another windows 2003 server. The intranet, amongst other functions, hosts a ecommerce store I wrote that sells nike apparel embroidered with our company logo. Up until recently, it would send an email to payroll and the cost would be deducted from the employees paycheck. lets say this store is located at http://mydomain.com (only available internally) Now, we've been told by the accountants that we can no longer auto deduct from payroll and the employee needs to pay with a credit card or cash. So i went to thawte.com and ordered an SSL cert to be on the safe side (even though the CC gateway is secure) and they told me i need to drop the .com from the domain name Not wanting to mess with a system thats perfectly functional, i created another DNS entry that just points to mydomain (no .com) and left the old one in there. so they would go to http://mydomain On my Mac (OS X 10.6) i can hit either one just fine On Windows XP / Windows XP Embedded or Windows 7 (the vast majority of the pc's on our network) http://mydomain - returns nothing http://mydomain.com still works https://mydomain.com works but says the cert is invalid (as it should, it was issued to mydomain - not mydomain.com) my question is: why does it work on my Mac and not on a Windows PC (i get dhcp and dns just like any other pc on the network) and will removing the .com one from the DNS server resolve this? I've done all the usual attempts - ipconfig /flushdns, ipconfig /renew and release even going so far as to stop and restart DNS client on my Windows 7 box; rebooting and shutting down - adding a regedit entry something along the lines of SecureResponses and rebooting nothing works... I think its the .com and the not conflicting in DNS but i'm not sure - and why not on OS X We're closed on sunday and i'm going to remote in and see what happens if i remove the .com from DNS but any other ideas? -Mario

  Read the article

• hMail server - sending copy of an e-mail changing the sender

  - by Beggycev

  Dear All please help me with following request. I am using hMail server in a company(test.com) and have several hundred of guest e-mail accounts ([email protected]). I need to accomplish this: When any of the guest e-mails receives a message(either from internal or external sender) this e-mail(or its copy) is sent to another address "[email protected]" which is the same for all of these guest e-mails. But I need the sender to be identified as the [email protected] not as the original sender which happens when I use forwarding. I tried to prepare a simple VBS script using the OnAcceptMessage event to accomplish this. and it works on my testing machine without internet connectivity but not in the production environment. To be specific, if I send an e-mail to [email protected] in my test env it is delivered to the [email protected] with [email protected] being a sender. But in the production env the e-mail stays in the guest mailbox with the original sender. I am interested in any solution, using a rule in hMail or script, anything is welcome. Thank you for any help! The script: Sub OnAcceptMessage(oClient, oMessage) 'creating application object in order to perform operations as hMail server administrator Dim obApp Set obApp = CreateObject("hMailServer.Application") Dim adminLogin Dim adminPassword 'Enter actual values for administrator account and password 'CHANGE HERE: adminLogin = "Admin_login" adminPassword = "password" Call obApp.Authenticate(adminLogin, adminPassword) Dim addrStart 'Take first 5 characters of recipients address addrStart = Mid(oMessage.To, 1, 5) 'if the recipient's address start with "guest" if addrStart = "guest" then Dim recipient Dim recipientAddress 'enter name of the recipient and respective e-mail address() 'CHANGE HERE: recipient = "FINAL" recipientAddress = "[email protected]" 'change the sender and sender e-mail address to the guest oMessage.FromAddress = oMessage.To oMessage.From = oMessage.To & "<" & oMessage.To & ">" 'delete recipients and enter a new one - the actual mps and its e-mail from the variables set above oMessage.ClearRecipients() oMessage.AddRecipient recipient, recipientAddress 'save the e-mail oMessage.save end if End Sub

  Read the article

• Start Menu Shortcuts resisting reorganisation

  - by seusr

  Running Win7. The Start Menu was getting too big, so I've navigated to C:\ProgramData\Microsoft\Windows\Start Menu\Programs and created some sub-folders in various categories [image editors, system utilities, media players, security for example] in which to group the shortcuts. Having created the group folders, I've dragged and dropped the Start Menu shortcuts into them. However it seems all Start Menu shortcuts are not alike. Some programs, their shortcut folders having been moved from the Start Menu, spawn NEW [but empty] folders bearing their company names in the top level of the Start Menu eg AVICodec Some programs don't have Start Menu shortcut folders that can be seen in WinExplorer [or equiv] at all, even though they turn up under the Start Menu itself. It seems these can be moved where they are visible i.e. in the Start - All Programs by dragging and dropping not just onto the desired folder but by hovering to expand the desired folder and then dropping between other shortcuts there. Eg Daum, Format Factory That's not such a problem, but why it's happening is a mystery. What's going on, and how to make these shortcuts behave normally or otherwise control them properly?

  Read the article

• Can't find standalone Chrome Gmail client that I know exists

  - by Carson

  I'm on Windows. A couple years ago when I switched from Outlook to Gmail (Google Apps), Google provided this awesome little standalone gmail client that was just a single-purpose Chrome install. It launched like a normal application, stayed updated when I updated Chrome. It was Chrome in a separate application that launched only gmail, stayed logged in really well, and "felt" like a gmail mail client, with the gmail interface. It had it's own little red envelope icon, it was a windows app. (I remember there was no Mac equivalent.) I found it while looking through the "this is how you get your company to switch to gmail" documentation that Google provided. I just repaved my box and now I'm looking for this thing again, and I had no idea it would be impossible to find. I've spent literally 2 hours looking, searching, googling, etc. I'm losing my mind. Anyone know how I can get my hands on this? I used it all day every day for 2 years, so I know it exists :), but I can not find it. Any assistance would be gratefully received.

  Read the article

• PXE bootable image for terminal server?

  - by HeavenCore

  We have 300 windows xp machines on cruddy old hardware across the company. With extended support for XP ending April next year we're looking into our options. Couple of options: Replace the 300 PC's with full windows 7 PC's (£100k +?) - no use of terminal server (our current model) Replace the 300 PC's with off the shelf thin clients & make use of our terminal server - Cheaper clients but Terminal Server CALS required? Keep the 300 PC's, replace windows XP with linux thin client capable of connecting to our terminal server - no hardware costs, just Terminal Server CALS required? Keep the 300 PC's - remove hard drives and make use of a PXE bootable "thin client" to connect to our terminal server If we were to choose option 4, what our the options out there? Is there any official PXE bootable thin clients for terminal server out there? If so, what are the licence requirements? Is there options we haven’t considered? There must be lots of companies out there in this situation - curious what the current trend is for this problem? Edit: Option 5 - Create a bootable Windows PE image with RDP auto start and use that as a "thin client" for our terminal server - is Windows PE licence free in such a model?

  Read the article

• Digital Asset Management, iPhoto / Aperture server... alternative

  - by Sisyphus

  Afternoon, Clients, 10 : All Apples running either Leopard or Snow Leopard Server : Snow Leopard server, (and I have a old Dell Poweredge 650 at home running Gentoo 2.6, if anybody as a Linux solution). The situation: I work in small design company with 8 people, at present we are looking to consolidate all our image files onto one location, at present we each use our preferred single user DAM solution, be it, Adobe Bridge, iPhoto/Aperture (some don't bother at all) The filetypes commonly used are .psd, .pdf, .eps, .tiff, .jpg and RAW image files. Ideally what is needed: Centralised on one server, but allows us to search via spotlight (not essential, but would be nice) Include searchable metadata information such as date, location, title Open-source or as low cost as possibly Allow simultaneous users to import files So far, I have looked at a few open source DAM, systems, such as Razuna, Gallery (not strictly DAM), ResourceSpace, Notre-DAM, while these are brilliant and open-source, they don't integrate as smoothly with the Desktop as iPhoto and aperture. For iPhoto and aperture, I have tried creating a Shared library on the server (a tad laggy), and also using a drive with no permissions, put a library and letting each client read from it, however if they want to put images onto the library only, it's only supports one user at a time writing to the library... Any ideas what could fulfill our needs? Or is it time to bite the bullet for FinalCut Server? Thanks in advance.

  Read the article

• Qmail Patching Makes me Nervous

  - by JM4

  We have a system running CentOS 5 with Plesk 8.6 and Qmail running. Our primary domain is hosted through Media Temple. When Plesk and Qmail are hosted on a single Dedicated Virtual server, it reads the primary server IP and domain and reports that when sending emails from the system. Our pages are written in PHP so we are using the mail() function. While our email goes out to everybody, several enterprise email domains reject our email because it shows a different originating IP (our primary server IP and domain) than the domain we list in the 'from' address. This is not modifiable. Every domain we own of course does have its own IP as well underneath our primary server IP. I have seen several places online that provide a patch, specifically - which allows Domain Binding: "DomainBindings -- For servers that host multiple domains or have multiple IP addresses assigned to them, it is sometimes useful (or important) to have qmail use a specific IP address for its outgoing mail. By default, qmail uses whatever address the OS chooses for all outbound connections. With this patch, you can specify which address to use. It uses a control file similar to smtproutes to specify the outbound IP address to use, based on the sender's domain (local copy) (pyropus.ca)" Qmail Link First off I do not have netqmail installed so I'll need to find another source, but also I am completely unfamiliar with applying patches to qmail. Will I lose email services if I patch? Is it a simple apply and use process? Will my existing email accounts and data be restored after the patch? I am very, very new to unix/linux so this does make me a bit nervous but I am the only person who can make the change and it is one our company "HAS" to have. Any ideas?

  Read the article

• Atlassian Crucible very slow on large repository

  - by Mitch Lindgren

  Hi everyone, My company has been running a trial of Atlassian Crucible for some months now. For repositories where it's working properly, users have given very positive feedback about the tool. The problem I'm having is that we have several different projects, each with its own repository, and some of those repositories are very large. One repository in particular has a large number of branches and probably around 9,000 files per branch. Browsing that repository in Crucible is extremely slow. Crucible is running on a CentOS VM. The VM has 4GB of RAM, and I've set Crucible's maximum at 3GB, of which it is currently using 2GB. I've brought this up in a support ticket with Atlassian, and they suggested the following: In particular because you have a rather large SVN repository you will likely find that Fisheye will be creating a large index file on disk. To help improve performance a few things you can try are: Increasing the available memory available to Fisheye (see the document above). Migrating to an external database: confluence.atlassian.com/display/FISHEYE/Migrating+to+an+External+Database Excluding files and directories from your index that aren't needed: confluence.atlassian.com/display/FISHEYE/Allow+(Process) (Sorry for not hyperlinking; don't have the rep.) I've tried all of these things to an extent, but so far none have helped greatly. I was originally running Crucible on a Windows box with 2GB of RAM using the built in HSQL DB. Moving to MySQL on CentOS saw a performance increase for some repositories, and made Crucible much more stable, but did not seem to help much with our biggest repository. There are only so many files/branches I can exclude from indexing while maintaining the tool's usefulness. That being the case, does anyone have any tips on how to speed up Crucible on large repositories, without investing in insanely powerful hardware? Thanks! Edit: To clarify, since I didn't mention it explicitly above, I am using FishEye.

  Read the article

• Windows DFS - file locking & replication?

  - by Adam Salkin

  I'm in a small company that has offices on the east and west coasts of America and also various people working from their homes. There are Windows Servers already in the offices. I think that Microsoft Windows DFS will do what I want, but despite reading the web site, I'm really not sure, so I'm hoping that someone can confirm if it will do all the following: (For various personnel / political reasons I know that a proposal for a Microsoft Windows system has more chance of being accepted than any *nix system) Creation of a Folder so that any files in this folder will automatically be available on the servers in all the offices. When anyone opens up one of these shared files on any of servers, the copies on all the servers will automatically be locked. And when they close the file, the updates automatically get copied to the file on all the servers. VPN access to these folders for people working outside the offices. Bandwidth at the main offices varies from 6 Mb/s to 20Mb/s. Files are Excel / Word / AutoCAD ranging in size from 100KB to 4MB. Thank you.

  Read the article

• Computer randomly freezes when playing games

  - by TutorialPoint

  My computer just randomly freezes when playing certain games. It has happened to me in Battlefield: Bad Company 2, Call of Duty 4, and Blacklight: Retribution. It has not happened to me with other games like Tribes: Ascend yet, which leads me to believe it is a software-side issue related to maybe DirectX or PhysX? Also, temperatures seem stable. I used RivaTuner combined with MSI Afterburner, and at the time of freezing with BF:BC2, it gives: 62C, 67% GPU usage and 78.8FPS. During the session the max I have seen was 65C and 97% GPU usage. On Blacklight: Retribution, I've heard other people complain about the problem too. This is why it is such a mystery to me, is this actually a driver problem, or more a game problem? I've been able to play these games for long until I re-installed Windows 7 (because it was growing too full and slow). Before I had a 32bit Ultimate version, and now 64bit. Specs: O/S: Windows 7 64bit Ultimate CPU: Intel i5-750 @ Default 2.66 GHz GPU: ASUS EAH5770 1GB PSU: CoolerMaster Real Power M520 (520W) MB: Gigabyte P55M-UD2 Catalyst Control Center version (in "About"): 2012.0214.2218.39913

  Read the article

• Ensuring a repeatable directory ordering in linux

  - by Paul Biggar

  I run a hosted continuous integration company, and we run our customers' code on Linux. Each time we run the code, we run it in a separate virtual machine. A frequent problem that arises is that a customer's tests will sometimes fail because of the directory ordering of their code checked out on the VM. Let me go into more detail. On OSX, the HFS+ file system ensures that directories are always traversed in the same order. Programmers who use OSX assume that if it works on their machine, it must work everywhere. But it often doesn't work on Linux, because linux file systems do not offer ordering guarantees when traversing directories. As an example, consider there are 2 files, a.rb, b.rb. a.rb defines MyObject, and b.rb uses MyObject. If a.rb is loaded first, everything will work. If b.rb is loaded first, it will try to access an undefined variable MyObject, and fail. But worse than this, is that it doesn't always just fail. Because the file system ordering on Linux is not ordered, it will be a different order on different machines. This is worse because sometimes the tests pass, and sometimes they fail. This is the worst possible result. So my question is, is there a way to make file system ordering repeatable. Some flag to ext4 perhaps, that says it will always traverse directories in some order? Or maybe a different file system that has this guarantee?

  Read the article

• Troubleshooting wireless connection problem / site survey?

  - by johnnyb10

  I just started in the IT department of a small company (200 users) and it's clear that one of the main problems that is driving everyone crazy is the spotty nature of the wireless connectivity throughout the office, particularly in certain conference rooms. This is a huge problem because the connection often drops during important presentations to clients. I was hired to help ease the load on the existing IT admin, who has done a great job, but is overloaded with many other tasks to deal with. So I would like to try to help out with this wireless issue. I am looking for advice on the best way to solve this problem--a realistic troubleshooting methodology that does not require me to spend any money. So far, I've experimented with Ekahau Heat Mapper, which is free and helps create a site survey. But I'm not exactly sure what I'm looking for or if there are other programs/tools/methods I should try as well. Any advice would be greatly appreciated. [Some background: The wireless setup consists of an HP ProCurve Mobility MSM (710?) controller that controls 10 access points throughout the building. There are three virtual wireless networks configured on the controller: one seems to be a default that cannot be changed, one is for internal employees and authenticates via Active Directory, and the third is a guest network for visitors. When I use HeatMapper, these show up as three different SSIDs, with different MAC addresses, all on the same channel. At first I thought maybe this would cause interference, but this seems to be the way the controller works;apparently, it automatically configures the channels to avoid interference from the other APs on the network.]

  Read the article

• Increasing SQL Server / Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/SQL Server VM all the RAM I can (12GB) & SQL Server RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL Server VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• Increasing MSSQL/Sage performance with SSD? (Dell PE T410)

  - by Anthony

  I have a client wanting better performance of their Sage (Accpac & CRM) server (v5.5, soon to be v7). It's running on 1 of 2 Hyper-V VMs (Svr2008) on a Dell PE T410 server with 24GB of RAM (1333MHz) & dual quad-core, and both VMs (only their C: drives) are on a single RAID5 array. All clients connect via 1Gb ethernet. The 2nd VM is SBS2008 with 9GB RAM (& all SBS dbs & company data are on a separate RAID5 array), & 3GB RAM for the Svr2008 hypervisor. I've given the Sage/MSSQL VM all the RAM I can (12GB) & SQL RAM caching (~8GB, never exceeds ~7.5GB, eg. entire db can now be cached in RAM) and that's helped significantly. Upgrading the Hypervisor to Svr2012 is an obvious step, but probably not a dramatic improvement? What about an SSD for this Sage/SQL VM (VM = 100GB, <10GB for the actual live DB) ? Can SSDs be put into the SAS hot-swap bays? Or will I have to use the mobo SATA(3Gbps?) ports, or PCI-E SSD card? Should SSDs be RAIDed for this situation? Or is SSD's higher reliability offsetting the need for RAID1/5/10? (I have nightly full disk backups) New territory for me, would appreciate some feedback. Thanks, Anthony.

  Read the article

• Alternatives to Splunk?

  - by MichaelGG

  I'm pretty impressed with Splunk, especially version 4. Pretty graphs, alerting (Enterprise only), and fast, accurate, searching. It's a great product. However, the cost just way too high to consider for full production use for our company. All we really need is to be able to index different logs in a central place, and have reasonable searching on that. Having alerts based on a saved search is also really nice. We don't really go beyond that. In fact, our biggest usage has been in deploying new applications. Everything gets logged via log4net to either the Event log on Windows or a text file on Linux. Splunk makes it pretty easy to quickly search across those to make sure all the parts of the app are working ok -- that's saved us tons of time versus hunting down individual logging sources. What alternatives exist in this market? I have a sinking feeling Splunk's pricing is so high because they have the best product by far, and they know it. We want the server to run on Windows. I'd be open to a split model, using one product for general logs (collect via syslog/Snare), and a dedicated product for our custom apps (like Log4Net Dashboard). Would using a simple syslog server such as Kiwi, sent to SQL Server (perhaps with fulltext enabled) work? I'd hope the cost should be well under 5 figures, USD. (And yes, I know, we're cheap. We're a startup with little money, and BizSpark takes care of all our MS licensing.) Edit: I should add, we have about 10 physical servers, 20 VMs, and a couple firewalls and switches. 90% is Windows.

  Read the article

• Lost partition after restarting

  - by nxhoaf

  I have Window 7 Professional Service pack installed in my Laptop Lenovo Thinkpad t420. After formatting the disk, and install Window 7 (detailed as above), I went to Computer -- Manager -- Storage -- Disk Management to split my 300gb C partition into 2 partition: C (which is 162gb) E (which is 140gb) Is work fine for about 2 days. Today, when I turn on my computer, I'm very suprise that the E partition is disappear. I can surely confirm that I didn't do any stupid thing yesterday. And before I shut down my computer, everything was fine. In general, here is what I did during the last today (from the point that I formatted the disk, and installed Window) Format 300gb hard disk Install window 7 Install eclipse, db2, .... ( I'm a developer) Install some other tools (Open office, Skype...) Install PGP (http://www.symantec.com/encryption) <--- I'm forced to used that due to my company policy Use Computer -- Manager -- Storage -- Disk Management to split my 300gb C partition into 2 partition as described above. It worked quite well for two last days. Until day... Can you please help me to recover my lost partition ? Thank you! For more info, here is my partition info: You can also see the image here

  Read the article

• Cent OS ifcfg configuration for ranges of IP's with different netmask

  - by Aaron Schlegel

  I have 1 set of 30 public IP's with a netmask of 255.255.255.0 and another set of 30 IP's with a netmask of 255.255.255.128. Both sets of IP's also have different gateways. How can I virtually assign the IP's to the machine? I have tried creating ifcfg-eth0:0 ifcfg-eth0:1 ifcfg-eth0:X ect for each IP. Below is my ifcfg file with. I have this for each IP with the correct gateway IP and netmask for each of my 60 IP's. If I do ip addr show it does show all of the 60 addresses with the correct broadcast IP and netmask. However I can only use 30 of my IP's that are from the same netmask. Am I doing this correctly? If the IP's show up with ip addr show does that mean I have correctly assigned them to the machine virtually? I want to check before I blame my hosting company for not routing the IP's correctly. DEVICE="eth0:1" BOOTPROTO="static" DNS1="**.**.**.**" DNS2="**.**.**.**" GATEWAY="2**.**.***.126" HOSTNAME="localhost.localdomain" HWADDR="0*:19:**:**:**:**" IPADDR="2**.*.**.**" IPV6INIT="no" MTU="1500" NETMASK="255.255.255.128" NM_CONTROLLED="yes" ONBOOT="yes" TYPE="Ethernet" Also is there a better way to do this? I have used ifcfg-eth0:0-range1 before to assign a range of IP's from the same netmask. Is it possible to do this with ranges with different netmask? Thanks!

  Read the article

• Kunagi LDAP configuration problems

  - by Willem de Vries

  We recently started with Scrum at our company and we wanted to start using Kunagi to test and see how it works. So I installed the kunagi_0.23.2.deb packet that I downloaded from their website, on my Ubuntu 11.04 running in tomcat6 using openjdk-6-jre. everything works fine except I can't get the LDAP to work. I have one AD server and one LDAP at my disposal for testing. For the LDAP I use the following info: -uri: ldap://192.168.1.11:389 -user: some_tested_user -passwd: the_pass -DN: dc=colosa,dc=net -LDAP Filter: (&(objectClass=user)) I tested various LDAP Filters, I don't know if I have the right one. However I get an erro when clicking "test LDAP". The error refers to the DN: Server service call error Calling service TestLdap failed. java.lang.RuntimeException: InvalidNameException: [LDAP: error code 34 - invalid DN] With the AD server I get no error while testing, yet I am not able to login I get: "Login faild" every time. I don't know if this is because of the LDAP Filter I entered, yet I can't get it to work. I have read this http://kunagi.org/iss652.html stating that I need to create my accounts inside Kunagi before I can login. So I did this with no effect. So basically my question is, what causes this DN string error (I am sure mine is right), and what LDAP Filter should i use? Any help would be highly appreciated.

  Read the article

• Terminal server performance over high latency links

  - by holz

  Our datacenter and head office is currently in Brisbane, Australia, and we have a branch office in the UK. We have a private WAN with a 768k link to our UK office and the latency is at about 350ms. The terminal server performance is reeeeealy bad. Applications that don't have too much animation or any images seem to be okay. But as soon as they do, the session is almost unusable. Powerpoint and internet explorer are good examples of apps that make it run slow. And if there is an image in your email signature, outlook will hang for about 10 seconds each time a new line is inserted, while the image gets moved down a few pixels. We are currently running server 2003. I have tried Server 2008 R2 RDS, and also a third party solution called Blaze by a company called Ericom, but it is still not too much better. We currently have a 5 levels dynamic class of service with the priority in the following order. VoIP Video Terminal Services Printing Everything else When testing the terminal server performance, the link monitored using net-flows, and have plenty we of bandwidth available, so I believe that it is a latency issue rather than bandwidth. Is there anything that can be done to improve performance. Would citrix help at all?

  Read the article

• Lag in Windows 7 with Zepto Znote 6224W

  - by Xink64

  Hi! Why does my Zepto Znote 6224W Laptop with Windows 7 make these small laggy moves whenever I use it? First I installed Windows 7 64 bit because of the memorycap in Windows 7 32 bit, but soon I realized that the system was lagging randomly. It was very annoying whenever I listened to music, because of the sudden lags. Then I tried everything with drivers; Chipset, Soundcard, Graphicscard, and so on. No luck. I then installed Windows 7 32 bit and this reduced the amount of lags but they are still here. I haven't tried bios upgrade since my bios should be newest according to now the now bankrupt Zepto company. My specifications: Zepto Znote 6224W Intel T8300 Intel Chipset PM965 PC-5300 4gb Nvidia 8600M GT Zepto's rebranded bios: Phoenix Technologies LTD Z14ND06 - Date: 12/20/2007 Harddrive: 320 GB 5400 RPM which I replaced with a Kingston SSDnow 40 GB. No luck either. I haven't tried Windows Vista on the machine though, but I would like to keep Windows 7.

  Read the article

• Setting up a Pagefile and Partition in Server 2008

  - by Brett Powell

  I am setting up 18 new machines for our company, and I have instructions from my new boss on setting up a Pagefile and Partition. I have looked at their existing machines to base the new setups off of, but there is no consistency between any 2 machines, which has left me extremely frustrated to say the least. My instructions are... 1) Set a static pagefile (use recommended value as max/min), set it on SSD if SSD available. 2) Make 3 partitions: C: is used for OS and install files D: is used for backups on machines with a SSD. On machines without SSD create a D: partition for pagefile (2*installed RAM for partition size) E: must be the partition hosting user files I have never messed with Pagefiles before, and looking at their existing machines is offering no help. My questions are... 1) As the machines I am setting up have no SSD (just 2 SATA drives) does it sound like the Pagefile should be setup on the C: (primary) drive or the D:? The instructions are vague so I have no idea. 2) As C: and D: are both Physical drives, does it sound like C: should be partitioned out to create the E: drive or D:? Thanks for any help I can get. I am extremely stressed out under a massive workload right now, and these vague instructions are quite infuriating.

  Read the article

• PPTP server connection closes - Too much data?

  - by Sebastian Hoitz

  I set up a PPTP server for my company. However, every time I have another computer connected to this server (i.e. our backup server) and a lot of data gets transferred, the connection to this computer closes. In the syslog on the PPTP server I find this message: Apr 22 12:44:34 komola-chase pptpd[2581]: CTRL: Reaping child PPP[2583] Apr 22 12:44:34 komola-chase pppd[2583]: MPPE disabled Apr 22 12:44:34 komola-chase pppd[2583]: Connection terminated. Apr 22 12:44:34 komola-chase pppd[2583]: Exit. Apr 22 12:44:34 komola-chase pptpd[2581]: CTRL: Client 192.168.0.11 control connection finished Apr 22 12:55:11 komola-chase pptpd[2674]: GRE: xmit failed from decaps_hdlc: No buffer space available Apr 22 12:55:11 komola-chase pptpd[2674]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Apr 22 12:55:11 komola-chase pppd[2675]: Modem hangup Apr 22 12:55:11 komola-chase pppd[2675]: Connect time 23.0 minutes. Hopefully you can help me as to what is wrong. As far as I can tell, there is no compression enabled on the PPTP server (npbsdcomp option). Thank you!

  Read the article

• Passenger not booting Rails App

  - by firecall

  I'm at the end of ability, so time to ask for help. My hosting company are moving me to a new server. I've got my own VPS. It's a fresh CentOS 5 install with Plesk 9.5.2 Essentially Passenger just doesnt seem to be booting the Rails app. It's like it doesnt see it's a Rails app to be booted. I've got Rails 3.0 install with Ruby 1.9.2 built from source. I can run Bundle Install and that works. I've currently got Passenger 3 RC1 installed as per here, but have tried v2 as well. My conf/vhost.conf file looks like this: DocumentRoot /var/www/vhosts/foosite.com.au/httpdocs/public/ RackEnv development #Options Indexes I've got a /etc/httpd/conf.d/passenger.conf file which looks like this: LoadModule passenger_module /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4/ext/apache2/mod_passenger.so PassengerRoot /usr/local/lib/ruby/gems/1.9.1/gems/passenger-3.0.0.pre4 PassengerRuby /usr/local/bin/ruby PassengerLogLevel 2 and all I get is a 403 forbidden or the directory listing if I enable Indexes. I dont know what else to do! Yikes. There's nothing in the Apache error log that I can see. The new server admin isnt much help as I think he's a bit junior and says he doesnt know about Rails... sigh :/ I'm a programmer and server admin isnt my bag :(

  Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >