Search Results

Search found 9271 results on 371 pages for 'properties'.

Page 269/371 | < Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >

  • org-sort multi: date/time (?d ?t) | priority (?p) | title (?a)

    - by lawlist
    Is anyone aware of an org-sort function / modification that can refile / organize a group of TODO so that it sorts them by three (3) criteria: first sort by due date, second sort by priority, and third sort by by title of the task? EDIT: I believe that org-sort by deadline (?d) has a bug that cannot properly handle undated tasks. I am working on a workaround (i.e., moving the undated todo to a different heading before the deadline (?d) sort occurs), but perhaps the best thing to do would be to try and fix the original sorting function. Development of the workaround can be found in this thread (i.e., moving the undated tasks to a different heading in one fell swoop): How to automate org-refile for multiple todo EDIT: Apparently, the following code (ancient history) that I found on the internet was eventually modified and included as a part of org-sort-entries. Unfortunately, undated todo are not properly sorted when sorting by deadline -- i.e., they are mixed in with the dated todo. ;; multiple sort (defun org-sort-multi (&rest sort-types) "Multiple sorts on a certain level of an outline tree, or plain list items. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Example: To sort first by TODO status, then by priority, then by date, then alphabetically (case-sensitive) use the following call: (org-sort-multi '(?d ?p ?t (t . ?a)))" (interactive) (dolist (x (nreverse sort-types)) (when (char-valid-p x) (setq x (cons nil x))) (condition-case nil (org-sort-entries (car x) (cdr x)) (error nil)))) ;; sort current level (defun lawlist-sort (&rest sort-types) "Sort the current org level. SORT-TYPES is a list where each entry is either a character or a cons pair (BOOL . CHAR), where BOOL is whether or not to sort case-sensitively, and CHAR is one of the characters defined in `org-sort-entries-or-items'. Entries are applied in back to front order. Defaults to \"?o ?p\" which is sorted by TODO status, then by priority" (interactive) (when (equal mode-name "Org") (let ((sort-types (or sort-types (if (or (org-entry-get nil "TODO") (org-entry-get nil "PRIORITY")) '(?d ?t ?p) ;; date, time, priority '((nil . ?a)))))) (save-excursion (outline-up-heading 1) (let ((start (point)) end) (while (and (not (bobp)) (not (eobp)) (<= (point) start)) (condition-case nil (outline-forward-same-level 1) (error (outline-up-heading 1)))) (unless (> (point) start) (goto-char (point-max))) (setq end (point)) (goto-char start) (apply 'org-sort-multi sort-types) (goto-char end) (when (eobp) (forward-line -1)) (when (looking-at "^\\s-*$") ;; (delete-line) ) (goto-char start) ;; (dotimes (x ) (org-cycle)) ))))) EDIT: Here is a more modern version of multi-sort, which is likely based upon further development of the above-code: (defun org-sort-all () (interactive) (save-excursion (goto-char (point-min)) (while (re-search-forward "^\* " nil t) (goto-char (match-beginning 0)) (condition-case err (progn (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o) (forward-line)) (error nil))) (goto-char (point-min)) (while (re-search-forward "\* PROJECT " nil t) (goto-char (line-beginning-position)) (ignore-errors (org-sort-entries t ?a) (org-sort-entries t ?p) (org-sort-entries t ?o)) (forward-line)))) EDIT: The best option will be to fix sorting of deadlines (?d) so that undated todo are moved to the bottom of the outline, instead of mixed in with the dated todo. Here is an excerpt from the current org.el included within Emacs Trunk (as of July 1, 2013): (defun org-sort (with-case) "Call `org-sort-entries', `org-table-sort-lines' or `org-sort-list'. Optional argument WITH-CASE means sort case-sensitively." (interactive "P") (cond ((org-at-table-p) (org-call-with-arg 'org-table-sort-lines with-case)) ((org-at-item-p) (org-call-with-arg 'org-sort-list with-case)) (t (org-call-with-arg 'org-sort-entries with-case)))) (defun org-sort-remove-invisible (s) (remove-text-properties 0 (length s) org-rm-props s) (while (string-match org-bracket-link-regexp s) (setq s (replace-match (if (match-end 2) (match-string 3 s) (match-string 1 s)) t t s))) s) (defvar org-priority-regexp) ; defined later in the file (defvar org-after-sorting-entries-or-items-hook nil "Hook that is run after a bunch of entries or items have been sorted. When children are sorted, the cursor is in the parent line when this hook gets called. When a region or a plain list is sorted, the cursor will be in the first entry of the sorted region/list.") (defun org-sort-entries (&optional with-case sorting-type getkey-func compare-func property) "Sort entries on a certain level of an outline tree. If there is an active region, the entries in the region are sorted. Else, if the cursor is before the first entry, sort the top-level items. Else, the children of the entry at point are sorted. Sorting can be alphabetically, numerically, by date/time as given by a time stamp, by a property or by priority. The command prompts for the sorting type unless it has been given to the function through the SORTING-TYPE argument, which needs to be a character, \(?n ?N ?a ?A ?t ?T ?s ?S ?d ?D ?p ?P ?o ?O ?r ?R ?f ?F). Here is the precise meaning of each character: n Numerically, by converting the beginning of the entry/item to a number. a Alphabetically, ignoring the TODO keyword and the priority, if any. o By order of TODO keywords. t By date/time, either the first active time stamp in the entry, or, if none exist, by the first inactive one. s By the scheduled date/time. d By deadline date/time. c By creation time, which is assumed to be the first inactive time stamp at the beginning of a line. p By priority according to the cookie. r By the value of a property. Capital letters will reverse the sort order. If the SORTING-TYPE is ?f or ?F, then GETKEY-FUNC specifies a function to be called with point at the beginning of the record. It must return either a string or a number that should serve as the sorting key for that record. Comparing entries ignores case by default. However, with an optional argument WITH-CASE, the sorting considers case as well." (interactive "P") (let ((case-func (if with-case 'identity 'downcase)) (cmstr ;; The clock marker is lost when using `sort-subr', let's ;; store the clocking string. (when (equal (marker-buffer org-clock-marker) (current-buffer)) (save-excursion (goto-char org-clock-marker) (looking-back "^.*") (match-string-no-properties 0)))) start beg end stars re re2 txt what tmp) ;; Find beginning and end of region to sort (cond ((org-region-active-p) ;; we will sort the region (setq end (region-end) what "region") (goto-char (region-beginning)) (if (not (org-at-heading-p)) (outline-next-heading)) (setq start (point))) ((or (org-at-heading-p) (condition-case nil (progn (org-back-to-heading) t) (error nil))) ;; we will sort the children of the current headline (org-back-to-heading) (setq start (point) end (progn (org-end-of-subtree t t) (or (bolp) (insert "\n")) (org-back-over-empty-lines) (point)) what "children") (goto-char start) (show-subtree) (outline-next-heading)) (t ;; we will sort the top-level entries in this file (goto-char (point-min)) (or (org-at-heading-p) (outline-next-heading)) (setq start (point)) (goto-char (point-max)) (beginning-of-line 1) (when (looking-at ".*?\\S-") ;; File ends in a non-white line (end-of-line 1) (insert "\n")) (setq end (point-max)) (setq what "top-level") (goto-char start) (show-all))) (setq beg (point)) (if (>= beg end) (error "Nothing to sort")) (looking-at "\\(\\*+\\)") (setq stars (match-string 1) re (concat "^" (regexp-quote stars) " +") re2 (concat "^" (regexp-quote (substring stars 0 -1)) "[ \t\n]") txt (buffer-substring beg end)) (if (not (equal (substring txt -1) "\n")) (setq txt (concat txt "\n"))) (if (and (not (equal stars "*")) (string-match re2 txt)) (error "Region to sort contains a level above the first entry")) (unless sorting-type (message "Sort %s: [a]lpha [n]umeric [p]riority p[r]operty todo[o]rder [f]unc [t]ime [s]cheduled [d]eadline [c]reated A/N/P/R/O/F/T/S/D/C means reversed:" what) (setq sorting-type (read-char-exclusive)) (and (= (downcase sorting-type) ?f) (setq getkey-func (org-icompleting-read "Sort using function: " obarray 'fboundp t nil nil)) (setq getkey-func (intern getkey-func))) (and (= (downcase sorting-type) ?r) (setq property (org-icompleting-read "Property: " (mapcar 'list (org-buffer-property-keys t)) nil t)))) (message "Sorting entries...") (save-restriction (narrow-to-region start end) (let ((dcst (downcase sorting-type)) (case-fold-search nil) (now (current-time))) (sort-subr (/= dcst sorting-type) ;; This function moves to the beginning character of the "record" to ;; be sorted. (lambda nil (if (re-search-forward re nil t) (goto-char (match-beginning 0)) (goto-char (point-max)))) ;; This function moves to the last character of the "record" being ;; sorted. (lambda nil (save-match-data (condition-case nil (outline-forward-same-level 1) (error (goto-char (point-max)))))) ;; This function returns the value that gets sorted against. (lambda nil (cond ((= dcst ?n) (if (looking-at org-complex-heading-regexp) (string-to-number (match-string 4)) nil)) ((= dcst ?a) (if (looking-at org-complex-heading-regexp) (funcall case-func (match-string 4)) nil)) ((= dcst ?t) (let ((end (save-excursion (outline-next-heading) (point)))) (if (or (re-search-forward org-ts-regexp end t) (re-search-forward org-ts-regexp-both end t)) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?c) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward (concat "^[ \t]*\\[" org-ts-regexp1 "\\]") end t) (org-time-string-to-seconds (match-string 0)) (org-float-time now)))) ((= dcst ?s) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-scheduled-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?d) (let ((end (save-excursion (outline-next-heading) (point)))) (if (re-search-forward org-deadline-time-regexp end t) (org-time-string-to-seconds (match-string 1)) (org-float-time now)))) ((= dcst ?p) (if (re-search-forward org-priority-regexp (point-at-eol) t) (string-to-char (match-string 2)) org-default-priority)) ((= dcst ?r) (or (org-entry-get nil property) "")) ((= dcst ?o) (if (looking-at org-complex-heading-regexp) (- 9999 (length (member (match-string 2) org-todo-keywords-1))))) ((= dcst ?f) (if getkey-func (progn (setq tmp (funcall getkey-func)) (if (stringp tmp) (setq tmp (funcall case-func tmp))) tmp) (error "Invalid key function `%s'" getkey-func))) (t (error "Invalid sorting type `%c'" sorting-type)))) nil (cond ((= dcst ?a) 'string<) ((= dcst ?f) compare-func) ((member dcst '(?p ?t ?s ?d ?c)) '<))))) (run-hooks 'org-after-sorting-entries-or-items-hook) ;; Reset the clock marker if needed (when cmstr (save-excursion (goto-char start) (search-forward cmstr nil t) (move-marker org-clock-marker (point)))) (message "Sorting entries...done"))) (defun org-do-sort (table what &optional with-case sorting-type) "Sort TABLE of WHAT according to SORTING-TYPE. The user will be prompted for the SORTING-TYPE if the call to this function does not specify it. WHAT is only for the prompt, to indicate what is being sorted. The sorting key will be extracted from the car of the elements of the table. If WITH-CASE is non-nil, the sorting will be case-sensitive." (unless sorting-type (message "Sort %s: [a]lphabetic, [n]umeric, [t]ime. A/N/T means reversed:" what) (setq sorting-type (read-char-exclusive))) (let ((dcst (downcase sorting-type)) extractfun comparefun) ;; Define the appropriate functions (cond ((= dcst ?n) (setq extractfun 'string-to-number comparefun (if (= dcst sorting-type) '< '>))) ((= dcst ?a) (setq extractfun (if with-case (lambda(x) (org-sort-remove-invisible x)) (lambda(x) (downcase (org-sort-remove-invisible x)))) comparefun (if (= dcst sorting-type) 'string< (lambda (a b) (and (not (string< a b)) (not (string= a b))))))) ((= dcst ?t) (setq extractfun (lambda (x) (if (or (string-match org-ts-regexp x) (string-match org-ts-regexp-both x)) (org-float-time (org-time-string-to-time (match-string 0 x))) 0)) comparefun (if (= dcst sorting-type) '< '>))) (t (error "Invalid sorting type `%c'" sorting-type))) (sort (mapcar (lambda (x) (cons (funcall extractfun (car x)) (cdr x))) table) (lambda (a b) (funcall comparefun (car a) (car b))))))

    Read the article

  • Can't connect to Sql Server 2008 named instance

    - by eidylon
    I just installed Sql 2008 Express on a new server running Windows Server 2008. I know Sql is working properly, because I can connect to the db fine locally, on the server. I cannot connect to it from a client machine though, neither by IP address nor by machine name (iporname\instance). I know I have the correct IP address, because I am RDCing into the server to perform all this configuration and setup, and if I ping the server name, it is resolving to the correct IP address as well. On the server, I have set up an inbound firewall exception allowing all traffic on any port on any protocol to sqlservr.exe. In SSMS, in server > Properties > Connections Allow remote connections to this server is enabled. In Sql Server Configuration Manager, TCP/IP is enabled in both the Protocols for <instance> and the Client Protocols sections. I looked in the Windows logs, but don't see anything about connections being denied or dropped. As far as I can see, I have everything set right, but cannot connect from a client machine. The client CAN connect to other Sql 2008 Express servers okay, so I know the client configuration is correct. Any ideas where else I can look for info of what/where/how this connection is dropping, greatly apprecaited! The error being returned by the client is: **TITLE: Connect to Server** Cannot connect to [MY.IP.ADD.RSS]\[MYINSTNAME]. ADDITIONAL INFORMATION: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26 Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)

    Read the article

  • I Can Edit SD Card on Windows XP but Not on Windows 7

    - by David C
    I have an 8GB SDHC card which I have used to upload pictures onto my Windows XP machine using an SD card reader ("SanDisk Ultra II"). I could also delete pictures and create folders on the card. I recently obtained a new computer that runs Windows 7 and, while I can view and upload the photos, I am unable to delete photos or create folders. When I attempt to do either of these two operations, the desired option does not appear in the menu ("Delete"/"New Folder"). Also, the shortcut keys do not work (e.g. the Delete key and Alt+F+W+F). I have attempted to change the Properties from Read-only, but am greeted with a "media is write protected". I should add that when I insert the Card Reader back into my Windows XP computer, I am granted full write permissions. Why can't I modify the SD Card from Windows 7? And, related, how can I fix this issue? Let me know if you have any additional questions. Thanks!

    Read the article

  • NFSv4 "Too many levels of symbolic links" error

    - by user1434058
    Both machines are running Ubuntu 12.04 Remote NFSv4 Client $ ls /mnt/storage/aaaaaaa_aaa/bbbb/cccc_ccccc gives this error: ls: reading directory .: Too many levels of symbolic links How can I fix this? When error occurs ls start listing the files, however PHP brakes. On the NFSv4 Server In /etc/fstab: /mnt/storage /srv/storage none bind 0 0 In /etc/exports /srv 192.168.1.0/24(rw,async,insecure,no_subtree_check,crossmnt,fsid=0,no_root_squash) /srv/storage 192.168.1.0/24(rw,async,nohide,insecure,no_subtree_check,no_root_squash) ERROR root@ds:root@ds:/mnt/storage/foreign_dbs/imdb/imdb_htmls# ls -l | head ls: reading directory .: Too many levels of symbolic links total 10302840 -rw-r--r-- 1 root root 10484 Jul 5 13:56 0019038.gz -rw-r--r-- 1 root root 16264 Mar 30 00:31 0259701.gz -rw-r--r-- 1 root root 13784 Mar 30 14:20 1000000.gz -rw-r--r-- 1 root root 12741 Mar 30 13:04 1000003.gz -rw-r--r-- 1 root root 12794 Mar 30 12:40 1000004.gz -rw-r--r-- 1 root root 13123 Mar 30 12:07 1000005.gz -rw-r--r-- 1 root root 13183 Mar 30 12:04 1000006.gz -rw-r--r-- 1 root root 13443 Jul 4 01:16 1000007.gz -rw-r--r-- 1 root root 12968 Mar 30 11:05 1000008.gz I came across it in PHP. scandir would return 1612577.gz & 1612579.gz, but skips 1612578.gz and yet the file types and properties are identical on them and this only happens on the nfs client, works 100% on the server

    Read the article

  • Why does RoboCopy create a hidden system folder?

    - by Svish
    I thought I would try out RoboCopy for mirroring the contents of a folder to another harddrive. And seems like it worked. But, for some reason, to see the destination folder I have to both enable Show hidden files, folders and drives and disable Hide protected operating system files. Why is this? Both the source and destination folder was initially both visible and normal directories. When I open up the properties for that destination folder, the Hidden attribute is even disabled. What is going on here? Is it because I ran it in an administrator command prompt? Or is it an issue with my choice of modifiers? Or does robocopy really just work this way? robocopy E: I:\E /COPYALL /E /R:0 /MIR /B /ETA Update: Tried to copy another drive to another folder, and I got the same thing happening there. But when I try to just copy a folder to a different folder, then the destination folder stays normal. Could it be because I copy a drive? If so, how can I prevent this from happening? Cause I really do want to copy the whole drive...

    Read the article

  • How can ICS in Windows 7 be managed via command line, scripts, config files, etc.?

    - by Skya
    I've been using ICS successfully for years, but now I'm looking for a way to control it through something else than the GUI in Control Panel\Network and Internet\Network Connections - Connection Properties: I want to do everything that the encircled checkbox does, without touching the GUI. But what does the checkbox do? Microsoft don't provide specific information and the most helpful forum post I've found is from 2003. Assuming that some of the advice is still valid, I've come to the conclusion that ICS is broken down into 6 parts that have to be set up individually: the sharedAccess service interface settings firewall rules a static route dnsproxy autodhcp I've already learned that the service can be started/stopped with the command net start/stop sharedAccess and that netsh is a good tool for changing the interface settings and the firewall rules. But I don't understand how ICS handles routing and DNS. All hosts in my network are configured statically, so I don't care much about autodhcp. Thanks for your help! EDIT: I've spent the whole day scanning through ProcMon and I've seen reads/writes to both the registry and the filesystem and it is difficult to determine what parts of it actually make ICS work. I'm trying to look for an API instead. I'm looking into this right now, but I still want to know more about the inner workings.

    Read the article

  • Workstations cannot see new MS Server 2008 domain, but can access DHCP.

    - by Radix
    The XP Pro workstations do not see the new replacement domain upon boot; they only see their cached entry for the old (server 2003) domain controller. The old_server is not connected to the network. I have DHCP working with the same scope as the old_server. In my "before-asking" search for a solution I came across the following two articles, and I recall doing things as suggested by the articles. http://www.windowsreference.com/windows-server-2008/how-to-setup-dhcp-server-in-windows-server-2008-step-by-step-guide/ http://www.windowsreference.com/windows-server-2008/step-by-step-guide-for-windows-server-2008-domain-controller-and-dns-server-setup/ The only possible issue is: I was under the impression that the domain netbios needed to match the DC's netbios. The DC netbios is city01 while the domain's FQDN is city.domain.org (I think this is mistaken and should have been just domain.org) But, the second link led me to a post which I believe answers my question. I did as they instructed by opening Local Area Connection Properties, then selecting TCP/IPv4 and setting the sole preferred DNS server to the local hosts static IP (10.10.1.1). Search for "Your problems should clear up" for the post I'm referencing: http://forums.techarena.in/active-directory/1032797.htm Have I misunderstood their instructions? I am hoping to reach the point where I can define users and user groups. Also, does TechNet have a single theoretical overview document I could read. I really don't like treating comps as magic. I will be watching this closely and will quickly answer any questions. If I've left anything out it is because I did not know it was needed. PS: I am loath to ask obviously basic questions, but I am tired and wish to fix this before tomorrow. Also, this is my first server installation, thank you for your help.

    Read the article

  • HTPC/DVR computer won't go into standby

    - by Robert
    When I select Start-Turn off computer-Standby the 'turn off computer' option window closes, and then nothing else happens. I can start new applications, and Windows acts like I never selected standby. I ran it for several hours after that. If I have a TV program scheduled to record when I select standby I get a window (the Pinnacle TV software) asking if I'm sure, there are programs scheduled to record - and the computer just keeps running after I select yes, never going into standby. I added that detail as it shows the standby process is starting. [This problem also happens if a TV program is not scheduled, so the scheduler task in not running/in memory. This problem happens regardless of whether I'm not watching TV. This problem happens regardless of whether Media Center is running (it usually isn't, I'm using Pinnacle to watch TV).] I looked at "How to troubleshoot hibernation and standby issues in Windows XP" http://support.microsoft.com/kb/907477 - ACPI is enabled, and "standby" is an option in "Power Options Properties." So it appears to be setup correctly. Windows XP SP3 Media Center Edition, all current updates installed.

    Read the article

  • Windows 7 autostarting apps as administrator

    - by Fujishiro
    Hello everyone. The question is easy to answer I guess. (Tried to search here, didn't find an answer.) So. The deal: There is a bug in OpenOffice (haha ..just one? :)), which prevents the spellcheck. You have to start it with right-click , run as administrator to make it work. Tried also setting this at the 'properties', but it didn't work. But 'quickstart.exe' would be also enough to make this work. (OpenOffice's quickstarter). So I'd like to run it at boot, as an admin, like I'd do with right-click. How to do THAT? (Actually there is a different bug for spellcheck on Win7. One have to run oowriter.exe as an admin, and then install the extension BY HAND from Program Files...\share...*.oxt. And THEN it'll work IF you run the app as an admin. (I'll buy SoftMaker's office as soon as the hu spellcheck arrives, but until then I have to make this work. Thanks for the answers in advance.))

    Read the article

  • Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace

    - by Nick
    I have an laptop top hard drive I was trying to use to my new media computer. The case is small and can accommodate for 2 2.5" drives, no 3.5" drives. I had been using the hard drive as storage hard drive until now. When I go to install Windows on the hard drive first I'm prompted at the bios of: Hard Disk:S.M.A.R.T. Stas BAD, Back up and replace. And then again in the Windows Setup, informing me that the hard drive is bad. So I did a full format of the drive and tried again. Same error. So I took it out and hooked it back up to my other computer via an Sata usb adapter kit (maybe the cause?). The hard drive is recognized fine and when I scanned it for errors by going: right click -> properties -> tools -> error checking It returns that the hard drive is fine. I have tried 3 different SATA cables and multiple jumpers. When I plugged in my 1.5 tb 3.5" drive the computer that gives me the S.M.A.R.T. error on the 2.5" drive, recognizes it with no problems. Any ideas on why this is happening and how I can fix it?

    Read the article

  • Word 2007 textbox management

    - by TheSavo
    I am updating a user manual that was initially written by somebody else. I know that most manuals are not written in Word, but our office only uses Microsoft Office applications. I am doing fairly well, creating and applying "styles". A lot of the directions in this manual require updated screenshots of the program it documents. … It's a big mess. </rant> One thing I am attempting to do is add “call outs” or Note text boxes like those seen in modern software manuals. I am attempting to do this with the Text box feature. However, I am having a hard time making them uniform in size and positioning. Does Word offer a way to manage the size and other properties of textboxes, similar to the way it allows you to manage text in styles? I feel that this could (or should) be possible. Is it possible to manage Text Boxes the same way you can manage styles?

    Read the article

  • running red5 on port 80

    - by ArneLovius
    I have a red5 application http://code.google.com/p/openmeetings that runs under red5, and is accessible on port 5080 and 8443 I've installed it on Ubuntu 10.04 The eventual aim is to have it accessible via https on 443 instead of 8443, but I thought I would initially try on 80 so that any issues were just down to the port configuration and not SSL certificates. I've tried changing the port from 5080 to 80 in the red5.properties file, but it fails to start. In the red5.log I have seen ERROR o.a.coyote.http11.Http11Protocol - Error initializing endpoint java.net.BindException: Permission denied /0.0.0.0:80 In the error.log I have seen ERROR o.a.coyote.http11.Http11Protocol - Error initializing endpoint java.net.BindException: Permission denied /0.0.0.0:80 and ERROR org.red5.server.tomcat.TomcatLoader - Error loading tomcat, unable to bind connector. You may not have permission to use the selected port org.apache.catalina.LifecycleException: Protocol handler initialization failed: java.net.BindException: Permission denied /0.0.0.0:80 There is nothing else installed or running on port 80, so I presume that this is a "needs to be root" situation. I would rather not run an Internet accessible web service as root. I know that Tomcat can run on port 80 by changing “#AUTHBIND=no” to “AUTHBIND=yes” in /etc/default/tomcat6 but I have not been able to find anything similar for red5. Am I on a hiding to nothing, or is there better way than running as root ? Thanks!

    Read the article

  • Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

    - by dgwilson
    We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

    Read the article

  • Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

    - by dgwilson
    We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

    Read the article

  • simple network between xp & 7 with cross cable problem...

    - by LostLord
    hi my dear friends : i have a simple network between xp & 7 windowses with cross cable (2 pc home)... ===================================================================== the one with 7 is mother and have 2 lan device (onboard + pci) A. onboard is like this when u go to tcp/ip v4 properties:(4 adsl internet) obtain an ip... preferred dns server : 81.91.129.67 alternate dns server : 4.2.2.4 shared...no permission 4 change so every thing is ok for internet on windows 7. B. the other lan pci card that is connected to pc with xp is like this : 192.168.2.11 255.255.255.0 0.0.0.0 empty empry computer name : cougar workgroup : nethome homeNetwork is disabled (i think that is 4 2 pc's with 7 os not xp) every thing is off in network options except file & printer sharing in public area ===================================================================== pc with xp os is like this : 192.168.2.12 255.255.255.0 192.168.2.11 (mean gateway) 4.2.2.4 8.8.8.8 computer name : tiger workgroup : nethome ===================================================================== at last my little net is ok... mean both have internet , both can see each other by their ip (\\192.168.2.11 or \\192.168.2.12) my problem is when in pc with xp type \\cougar it shows an error about network path! but in pc with 7 \\tiger works perfec. what is the problem in system with xp ? in few days ago this network was ok (search by computer name) when both os were xp , so there is no problem with my cable or devices. another problem is i can not find tiger in my network list in 7 pc \ why? is something wrong with my network? thanks 4 future advance best regards

    Read the article

  • MSSQL Server Management Studio Express 2005 license limit error should not be displayed

    - by Erik Vold
    I just tried restoring a 250MB database from a backup on my local machine, and got the following message: TITLE: Microsoft SQL Server Management Studio Express ------------------------------ Restore failed for Server 'MULTIVIS-A0D9F3\SQLEXPRESS'. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=Microsoft.SqlServer.Management.Smo.ExceptionTemplates.FailedOperationExceptionText&EvtID=Restore+Server&LinkId=20476 ------------------------------ ADDITIONAL INFORMATION: System.Data.SqlClient.SqlError: CREATE DATABASE or ALTER DATABASE failed because the resulting cumulative database size would exceed your licensed limit of 4096 MB per database. (Microsoft.SqlServer.Express.Smo) For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&LinkId=20476 ------------------------------ BUTTONS: OK ------------------------------ I had 3 db's on the machine, one ~4.1gb db and two other dbs < 10mb each. So I did some googling on this error and saw the suggestion to try shrinking my other dbs to free up some space. So I did so on the 4.1gb db and now when I go to 'properties' for that db it says it is taking/using ~2.4gb. So I should have space now I figure, but whenever I try to restore the ~250mb database now I still get the error message above.. I tried restarting as well but that wasn't helpful. Any idea what the issue is?

    Read the article

  • MacOSX: remove write-protect flag from file in Terminal

    - by Albert
    Hi, I have a file on a FAT32 volume which is shown as write-protected in Finder (so I cannot move it). Removing that write-protected flag in the information dialog works just fine. However, I have many more such files and I thus want to do it via Terminal. I already tried via 'chmod +w' but that didn't worked. 'ls -la' showed me that they are already just fine ("-rwxrwxrwx 1 az az " where az is my user account). Then I thought this might be stored in some xattr properties but 'xattr -l' didn't gave me any entry. Then I thought this might be some ACL setting (whereby I thought they would be stored as xattr but let's try it anyway) - and some Google search returned me something with 'chmod -a' or 'chmod -i' or so. All these tries only give me chmod: No ACL currently associated with file" or chmod: Failed to set ACL on file...: Operation not permitted". But I definitly have no write access to the file because I cannot move it or do any other change to it (in Terminal). Removing the write-access flag in Finder solves that.

    Read the article

  • How to edit a read-only document in LibreOffice?

    - by TestUser16418
    I need to fill a form (which I received in .doc format and saved as .odt). The file is read-only except for the fields where I can enter the information. Unfortunately, with the fields filled it doesn't fit on one page, and I need to edit it so I can print and submit it. With LibreOffice beta 3, I could edit anything outside of the fields, and the fonts were slightly smaller, so it fit on the page even with the fields filled. Today I upgraded LibreOffice, and when I opened to edit a field where I had a mistake, it no longer fits on the page, and I can't edit it. When I opened the properties it says that the document is NOT read-only, but it is. When I try to delete text it tells me that I can't edit the read-only content. Can anyone give me some advice, because I've been trying to print my form for 2 hours already. I tried AbiWord and KWord, but both are missing elements from the page (though the forms fit). I can also edit the margins (Format - Page is dimmed, but when I begin to edit a field it's no longer dimmed)med

    Read the article

  • New monitor connected to HDMI adaptor doesn't show output after booting

    - by Paul
    Hello out there in the multiple monitors’ world. I am a very old newbie in your world and need help. I just purchased a new Asus VH236H monitor and hooked it up the HDMI port of an ATI Radeon HD4300 / 4500 Series display adaptor. I left the old Princeton LCD19 (TMDS) hooked up to the DVI port of the same display adaptor. Both monitors displayed the boot sequence, after I fired good old Sarastro2 (Asus P5Q Pro Turbo – Dual Core E5300 – 2.60 GHz) up. The Asus lacked one half of a second behind the Princeton until the Windows 7 Ultimate SP 1 boot up was complete. Then the Asus displayed “HDMI NO SIGNAL” and went into hibernation. The Princeton stayed lit up as before. Both monitors are displayed on the “Screen Resolution Setup Display” and I plaid around with them for a while. The only thing I accomplished was to shove the desktop icons from the Princeton to the still hibernating Asus. The “Multiple displays:” is set to “Extend these displays”, the Orientation is “Landscape” and the Resolutions are set on both to the “recommended” one. Both monitors show that they work properly in the advanced Properties display. What am I doing wrong, what am I missing? Never mind the opinions about the different resolutions of the two monitors. I always can unhook the Princeton and give it to a Goodwill Store if I do not like the setup. I just would like to make it work. Any constructive help is very much appreciated, Thank you.

    Read the article

  • DNS Does Not Register at Off-site Locations

    - by Russ Warren
    First of all, let me give you the specifics of our setup: Windows Small Business Server 2008 Domain w/ all applicable updates on the DC The DC does DHCP for the main site The DC does DNS for all sites 3 sites including our headquarters where the DC is located All sites are connected through OpenVPN SSL tunnels terminated by an Untangle box at each site The 2 remote sites us the Untangle box as a DHCP server for their subnet, which assigns the DC as the primary DNS server Collection of Windows XP and Windows 7 workstations connected to the domain Here's the issue: All of the workstations at the main site register with the DNS server on the domain controller fine. As they grab an IP from the DHCP server, it updates the DNS server with the new host record. I have 2 systems (each at different remote sites) that fail to register with the DNS server. I've attempted the following troubleshooting steps: Confirmed the network adapter is using the DC as a DNS server Confirmed 2-way traffic is possible between DC and workstation Verified the "Register with DNS server" setting was checked in the adapter properties Attempted ipconfig /registerdns and received no errors For the time being, I have setup a DHCP reservation for these systems and manually created a host record. This seems to work fine, but I need a solution for any new systems that go out there.

    Read the article

  • Fixing corrupt files or corrupt file table on a USB drive?

    - by Kelsey
    I was doing a virus scan on an external USB drive while copying data over to it. While AVG was scanning my system got locked up I think due to the USB drive running out of space and it required a reboot. Since that time all data on the external drive is no longer accessible. I can see all the files in the root and directories but I cannot browse into any of them as Windows 7 gives an error stating they are corrupt. I think the file table or whatever it uses to store the index of what exists on the drive has been corrupted since it still shows the the drive as being almost full but everything I do a properties check on says it is 0 bytes. Does anyone know how to 'unlock' or recover this data? Is there a way to rebuild the file table somehow? Luckily I can recover this data from other sources as a last resort but I would like to fix this if possible. Any help would be appreciated. Thanks.

    Read the article

  • ISA 2006 SP1 - SSL Client Certificate Authentication in Workgroup Environment

    - by JoshODBrown
    We have an IIS6 website that was previously published using an ISA 2006 SP1 standard server publishing rule. In IIS we had required a client certificate be provided before the website could be accessed... this all worked fine and dandy. Now we wish to use a web publishing rule on ISA 2006 SP1 for this same website. However, it seems the client certificate doesn't get processed now, so of course the user can't access the website. I've read a few articles stating the CA for the certificate needs to be installed in the trusted root certificate authorities store on the ISA Server (i have done this), as well as installing the client certificate on the ISA Server (done as well). I have also verified that the ISA Server is able to access the CRL for our CA no problem... In the listener properties for the web publishing rule, under Authentication, and Client Authentication Method, there is an option for SSL Client Certificate Authentication... i select this, but it appears the only Authentication Validation Method selectable is Windows (Active Directory).... there is no Active Directory in this environment. When i configure the rule with the defaults, I then try to hit my website and it prompts for my certificate, i choose it and hit ok... then I'm given the following error Error Code: 500 Internal Server Error. The server denied the specified Uniform Resource Locator (URL). Contact the server administrator. (12202) I check the event logs on the ISA Server and in Security Logs, i see Event ID 536, Failure Aud. The reason: The NetLogon component is not active. I think this is pretty obvious since there is no active directory available. Is there a way to make this web publishing rule work using client certificates in this workgroup environment? Any suggestions or links to helpful documents would be greatly appreciated!

    Read the article

  • Everyone can access my Windows 7 Homegroup file shares - Even Windows XP computers

    - by Adrian Grigore
    I have 3 computers in my network, two running Windows 7 and one running Windows XP. I've set up a homegroup on both Windows 7 computers. Also, all computers are in the same Workgroup. The problem is that one of the Windows 7 computers makes all shares accessible to the entire Workgroup instead of just sharing to the Homegroup as it should be. I created the file share in Windows 7 via right-click in the explorer, then click on "Share For" - "Homegroup (Read/Write)" (translated from German, so the actual wording may be different). Also, when I look at the file sharing properties of that folder, Windows Explorer informs me that Users must have a valid account and password for this Computer to access drive shares. Unfortunately this is not true. Being in the same Workgroup is enough to get access. Homegroup restrictions work as expected on my other Windows 7 computer. When trying to browse those shares from the XP computer, I get a dialog asking for a login and password. What might cause homegroup restrictions to fail and how can I fix this?

    Read the article

  • Desktop.ini Issues/Confusion

    - by EpicDavi
    BACKSTORY: I was out of town for a while and I forgot to turn my computer off. When I came back I saw that a desktop.ini file was on my desktop (using Windows 7). I thought that was odd because I knew it was a system file and it usually didn't show up due to the fact that I had disable the feature to show system files. Also it wasn't translucent like the other system files. I went to my control panel and saw that the "Hide protected operating system files" was indeed enabled. This puzzled me so I disabled the setting and another one was on my desktop like it usually is hidden. So now I have to desktop.ini files on my desktop: one hidden and one not hidden. I am doing an antivirus check to see if anything was going on and I will give an update soon. I am pretty sure these files are harmless and could be deleted but I would rather get another person's opinion on the subject. Thanks! UPDATE: I did an anti-virus scan and it seems I have no problems. It is odd because the file seems to maintain system file properties such as not being able to be edited and other things. Also I have tried restarting my computer and it is still not hidden. So the question remains: What should I do with the file and what caused it?

    Read the article

  • "The zone can be scavenged after" keeps incrementing

    - by kce
    What are you trying to do? I'm trying to enable DNS scavenging on a DNS zone that has about a hundred stale DNS records. What have you tried in order to make it happen? I setup DNS Scavenging per everyone's favorite TechNet Blog post: Don't be afraid of DNS Scavenging. Just be patient. I first disabled scavenging on all of our domain controllers: DNSCmd . /ZoneResetScavengeServers contoso.com 192.168.1.1 192.168.1.2 I then enabled automatic scavenging on the DNS zone: I then enabled DNS scavenging on one of the domain controllers: I then found a few records that I expected to get delete with timstamps from a few years ago and ensured that that the Delete this record when it becomes stale and that time stamp was actually set: Finally I reloaded the zone and waited 14 days (the sum of the Refresh + No-Refresh periods). What results did you expect? I expected to see a 2501 Event in the DNS server logs noting the deletion of a bunch of DNS records. What actually happened? Nothing happened. The Zone Aging/Scavenging Properties showed that the zone could be scavenged after 6/12/2014 10:00:00 AM last week. No 2501/2502 events were recorded. All of the records with "aged" time stamps are still present. The date at which the zone can be scavenged after incremented another seven days to ?6/?18/?2014 10:00:00 AM. As I understand it until that date stays at least 14 days in the past nothing will ever even be eligible for scavenging let alone actually be scavenged. The only 2501 events recorded in the event logs are ones that I have triggered by right clicking and selecting "Scavenge Stale Resource Records". They note that scavenging will try to run again in 168 hours which was this morning. I have DNS scavenging enabled for a few months and have waited patiently for something to happen. I have reloaded the zone multiple times (which resets this timestamp). What am I missing here?

    Read the article

< Previous Page | 265 266 267 268 269 270 271 272 273 274 275 276  | Next Page >