Search Results

Search found 22756 results on 911 pages for 'cisco vpn client'.

Page 27/911 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Does Windows 7 VPN push Client DNS?

  - by K20GH

  I'm using a VPN in conjunction with my iPad (no OpenVPN sorry!) so have just configured the Windows 7 PPTP VPN and i've got it working fine. However what I need to know is will it force my iPad to use the global DNS settings configured in Windows, or will it use the DNS settings i've set on my iPad? I've got unblock-us at home and would like to use it on my iPad while i'm away. Since unblock-us uses IP addresses it wouldn't work on my iPad outside of my home network, hence the use of a VPN ;) The only issue is I don't want to use unblock-us DNS's on my Windows box, only on my iPad

  Read the article

• Route a specific user's traffic via VPN but still allow local networking

  - by wbg

  So, I want to route certain traffic via a VPN connection and the rest via my normal Internet connection. I want to run several different programs and most of them don't support binding to a specific network interface (tun0 in my case). I've managed to send a specific user's traffic via the VPN following the answers given here: iptables - Target to route packet to specific interface? But unfortunately, when I run a server that connects to the Internet and has a web interface running on a local IP (127.0.0.1/192.168.0.*), all the Internet traffic correctly goes via tun0, but I'm unable to connect to the web interface from a local IP as a different user. When I log in as the VPN-ified user, I can access services running on local IPs, but other users/machines can't access any servers I start. Can anyone point me in the right direction?

  Read the article

• How to bridge two networks via VPN (IPsec)?

  - by polemon

  I'd like to do a Site-to-Site bridging with VPN (IPsec), how do I do that? On the local side, I have a DrayTec Vigor2910, it is supposed to be able to manage IPsec tunnels. Anyway, I need to have several VPN tunnels to various sites, but how exactly do I do that, If the only router I can configure, is the local one? As I understand it, I'd need some sort of VPN server or client, or whatever on the other side. In any event, please clarify that issue. Thanks.

  Read the article

• How to setup VPN on home network

  - by Tone

  I am a software developer. I travel and sometimes have a need to access my files at home and tweak other family members computers. I would like to connect to my home network via VPN and then RDP into whatever machine i need to. Currently i have a Windows Server 08 machine, which is my file server, database server, web server (for development work), source control repository, etc. (and also somewhat of a workstation when i need it to be). I want to use this same machine to run my VPN through. I have a linksys WRTG54 router. My ISP is AT&T DSL, with a dynamic IP address - so i'm assuming I'll either need to request a static IP or sign up with one of those static ip services.. where it keeps your dynamic ip synced up with a static one. While I do understand software engineering I am no expert in networking. What do i need to do to setup my VPN?

  Read the article

• VPN stuck on Verifying Username and Password

  - by user2791

  I'm building a new machine and everything is working correctly, except that I can't log on to my VPN. It hangs at the "Verifying username and password..." step, then returns after about 30 seconds claiming Error 721. I have another machine sitting next to this one with the VPN connection configured exactly the same, connecting just fine over the same wifi network, so I'm convinced that there is no server or firewall problem. The VPN works fine. This machine simply can't connect to it given the correct credentials and configuration. Any suggestions?

  Read the article

• Login-time quota for VPN users

  - by Isaac

  I have configured Routing and Remote Access Service in Windows Server 2003 as the VPN server. VPN users are defined in Active Directory which is running on this server too. How i can configure the server to give each user a limited download size (for example 1GB) and does not authenticate them when they exceeds their download quota. The VPN server should also disconnect the users that reach their quota. Update: Apparently a third-party RADIUS server could provide this feature. One solution I have found is TekRADIUS but it is commercial. FreeRADIUS is a open-source free RADIUS server but I am not sure if it could these kind of features.

  Read the article

• VPN on PC vs Mac

  - by allstar

  I am trying to connect to a VPN from my home computer, as opposed to my work computer which already has the network info set up. I have received instructions on connecting from a mac, but since I don't have that I'm trying to do the equivalent on my PC. I know the: server group name secret and my own login account and password Using the Windows 7 VPN, there's space for: Internet address destination name user name password domain (optional) I'm trying to determine what's what. I assume the internet address is the server. I've tried using the "secret" as the Password, b/c i'd think the first part is connecting to the VPN as opposed to logging in. It still wants a user name though. I tried mine, I tried the "group name". I would appreciate your help with this. Thanks!

  Read the article

• How to get paid and figure out if I want to keep this client [migrated]

  - by Heiner Fawkes

  I have a client who is not paying on time, but it looks like the specifics don't match similar questions on this SE site. I got a call from a client I did website work for years ago. I had not done this kind of work for many years and frankly I'm not sure I want to now, but nevertheless about a month ago I agreed to bring his website, SEO, social media, and overall marketing for his small business up to speed. Why? He has told me many times how I'm the most honest, most well-informed contractor he's had experience with. And I personally kind of like him too. So I started working on an hourly basis. I sent one very small invoice and got paid. Then we talked a whole lot about all sorts of feature he would like me to implement. I started that work, and sent a second invoice on the first of the month (one of my two stated billing days). I didn't get paid. On every invoice it states that I charge a whopping ten percent per week late. I sent many voicemails and emails asking to please let me know what's going on with payment, and didn't get replies. Then the 15th of the month rolled around (which I stated initially as one of my invoicing dates). Since I hadn't been paid for the last invoice, I simply didn't send him an invoice at that time but emailed him and said that I will combine it with the next scheduled invoice for this reason (probably a bad idea I realize). Eventually he sent a portion of the invoice payment. I emailed back to let him know that he's three weeks late and what the remaining balance is. Finally we got in touch via phone. He basically told me that he thought I hadn't done all of the work I said I did. He looked at the page source code and it didn't look complete to him. I explained why his perception would be different and what work I had done as specified. He accepted this and said that part of the reason he didn't pay in full is that he's been swamped with personal family stuff, and part of the reason is that he didn't think I did all the work. That struck me as pretty weird. He also expressed concern that he has no idea now how much all the changes he has asked for are going to cost. And once again, he told me how honest and high-quality my services are compared to others he has dealt with. He also said he would pay me more (but not all) of the now three weeks overdue invoice that day. I didn't receive any payment. Basically this is how the client relationship strikes me: He's not good at communication. He's very busy and English isn't his first language. He almost never replies to emails but phone calls are fine. He's asked me to avoid emails for communication and I've asked him to please use email. He might not have enough money to afford all the things he has asked for. But so far I have been working for an hourly fee (which is quite high). He also has started paying monthly for hosting and social media services from me. What seems very abnormal is for a client to be so overdue on payments and to actually withhold payment of an invoice without any communication because he didn't think the work was done. I told him that I will send dollar estimates of each module of remaining work so that we can decide which ones are the highest priority if he cannot afford them all. I also reiterated that in the future if he has doubts about the work or an inability to pay, he must contact me immediately to say so. I basically plan to state the following to him: I would like to work for him and help his business. I also have sympathy for his recent family difficulties. I am happy to figure out payment plans that would work better for him, but first I need to be paid in full for all outstanding invoices, especially given that I skipped one of them just to be nice. The most crucial thing I need is communication about any problems with my work or his ability to pay. Once again, he heeds to pay in full immediately before we negotiate anything else. Does the above seem like an appropriate communication? Is anything missing from it? Is anything I'm doing here really abnormal?

  Read the article

• Open Source Client-Based Project Management?

  - by Chuck

  For quite some time I've been searching for a web-based, open-source project management program that I can run on my rented space at Dreamhost to track client projects. dotProject seems nice, but I've never figured out how to create projects that only certain people can access. I'm usually working on two or three projects at a time for different clients, and would like to be able to allow access for each client to their project but not others. So, first of all, can anyone point me to how to do this in dotProject, and baring that, can anyone recommend an open-source solution to this problem?

  Read the article

• Cisco Anyconnect Issue on HTC HD2

  - by Myles

  Hello, We've just got a HTC HD2 handset through (UK - T-mobile); and we've installed the Cisco Anyconnect client. It connects ok but then after a few seconds disconnects, then reconnects. It then keeps cycling through in this way, and at no point can we even attempt to sync Exchange! Our ASA 5510 reports; Group User IP <149.254.217.2 SVC Message: 17/ERROR: Reconnecting to recover from error.. And from the phone log; 10:56:03Debug Function: CSocketTransport::getTransportMTU File: ..\IPC\SocketTransport.cpp Line: 1058 Invoked Function: CNetInterface::GetTcpIpMTU Return Code: -32571377 (0xFE0F000F) Description: NETINTERFACE_ERROR_INTERFACE_NOT_AVAILABLE Does anyone have any advice on why it's constantly disconnecting? The phone log does suggest a lack of service; but the phone can browse the net, make calls, etc and appears to have good signal throughout. We did try the Anyconnect software on a Windows 7 PC which worked fine, no drop outs. Any help would be greatly appreciated! Thank you, Myles

  Read the article

• Cisco ASA Hairpinning with Dynamic IP

  - by Joseph Sturtevant

  I currently have my Cisco ASA 5505 firewall configured to forward port 80 from the outside interface to a host on my dmz interface. I also need to allow clients on my inside interface to access the host in the dmz by entering the public ip / dns record in their browsers. I was able to do that by following the instructions here, resulting in the following configuration: static (dmz,outside) tcp interface www 192.168.1.5 www netmask 255.255.255.255 static (dmz,inside) tcp 74.125.45.100 www 192.168.1.5 www netmask 255.255.255.255 (Where 74.125.45.100 is my public IP and 192.168.1.5 is the IP of the dmz host) This works great except for the fact that my network has a dynamic public IP and this configuration will therefore break as soon as my public IP changes. Is there a way to do what I want with a dynamic ip? Note: Adding an internal DNS record won't solve my problem since I have multiple dmz hosts mapped to different ports on the public IP.

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• Why did my Cisco router hang?

  - by Mike Pennington

  We have a Cisco 1841 in our storage IDF that was originally running a 12.4(1) IP-BASE image; I wanted to upgrade to an advancedservicesk9-mz image, but the flash did not have enough space, so I deleted the running image. Later I tried inserting a larger CF from a Catalyst4500, which crashed the 1841 router (now without a bootable image). Using another 1800 series router, I loaded the 12.4(25g) advancedservicesk9 image and verified the image checksums. I set the confreg to 0x2102 from rommon and booted the new image; however the 1841 now hangs indefinitely after printing the IOS export control banner. I have tried four other images, all with the same results. What is wrong with this router? UPDATE 1: I tried loading images from a FAT16-formatted USB, but this didn't work either. I also tried tftpdnld from rommon, but got a get_mac_address(): Search T_IDPROM_MACADDR (0xc3) failed Illegal MAC address. error and the file would not load.

  Read the article

• Cisco Secure ACS 4.2 + TACACS+ - installed together or?

  - by Lance

  I'm tasked with installing Cisco Secure ACS (4.2 as its windows based). Do you install TACACS.net or something similar with ACS or does ACS facilitate the TACACS+ authentication? I can get my device to authenticate against a tacacs.net installation without much trouble but can't seem to figure out how one plugs ACS in, per se. I've installed ACS on the same server (is this my problem?) but no matter what I do I can only get my TACACS+ users to authenticate. Any helps/tips would be greatly appreciated!

  Read the article

• Cisco 2811 router ignored input errors

  - by elbekay

  I've got a Cisco 2811 (AdvIPServices 12.4(25e)) that is showing input errors on both its interfaces, all the errors are of the ignored type. The counter for ignore errors is not increasing continuously, which made me think it would be happening in line with traffic bursts, but there really isn't a large amount of traffic running through it at any time. Both the router interfaces are connected to a 4900 (IPBase 12.2(54)) series switch. The only things I can see are: There is a slight mismatch in duplex/speed negotiation settings, one side is set to auto/auto and one full/auto, however they have negotiated fine. There have been a few fallbacks on the interface buffers, and some trims in the public buffers. Any suggestions for things to look at? I will be correcting the duplex neg settings, and might try a buffer tune, but I don't think it will help.

  Read the article

• Cisco vlan entry missing in vlan.dat, but appears in running-config

  - by nLinked

  One of our vlan's (ID: 104) stopped working suddenly and computers on that vlan failed when trying to obtain a dhcp ip address. On the Cisco switch if we do show vlan, this command is supposed to shows the vlans in the vlan.dat file. We notice it has every other vlan except the one that is now missing. If we show the running-config or even the startup config, they DO show the missing vlan (as if everything is fine), but that vlan doesn't take effect. We tried deleting the "missing" vlan using clear vlan 104, but it says No subinterface configured for vLAN Identifier 104, so it's already missing. Recreating the vlan, saving and rebooting still doesn't add it into the vlan.dat or make the vlan work. The switch is in vtp server mode. Our startup config is here: http://pastebin.com/RHxxTG5p Any ideas appreciated.

  Read the article

• Cisco FC SAN switch decision

  - by Chopper3

  I've got to buy a bunch of FC SAN switches in the next week or so, I have to, and want to, buy Cisco MDSs. Servers are HP BL490c G6's in C7000 chassis with Virtual-Connect Flex-10 ethernet interconnects and VC FC interconnects (Emulex HBAs btw), all running ESX 3.5U4 (for now). I think I've only really got two choices; MDS 9509's with dual-supervisors with a single 48-port 4Gb FC card MDS 9222i's with single supervisor and the built-in 18-FC-port/4-GigE-FCIP-port option Both have the same functionality (I think, buying the enterprise licence btw), both have plenty enough performance and adequate ports for now and the next three years. The 9222i's are about 55% the price of the 9509's - logic says get the 'i's but will I really miss the dual-supervisors? I've got lots of 9509's with dual-supervisors that I'm very happy with but I'm not sure I've every benefitted from the dual-sups in the past and they are nearly twice the price - but if I don't buy them and miss them I can't retrofit them later. What are your thoughts?

  Read the article

• Cisco asa 5505 locks up / unresponsive

  - by Chris

  We have a cisco asa 5505 that's new (in service for about 2 months) running 7.2(4) software. Every day around 10a it locks up for approx 10 minutes. We're monitoring it via snmp with stg, and snmp doesn't respond during that time. There's no output in the 'show crash' output. Internet connectivity is also dropped. Wondering if anyone else has seen this and what the fix might be. Currently we're looking at upgrading software, but will need memory upgrade for that. We've forced the speed and duplex on the internal and external interfaces, but the problem is still occurring. It's connected on the internal lan to a netgear 724 gige switch.

  Read the article

• Autonegotiate errors between HP and Cisco hardware?

  - by Satanicpuppy

  This is a bit of a specific extension to this question. I've got two ASA's that feed into a Procurve switch, and then into an IPS. All is well except that the procurve absolutely refuses to autonegotiate with the ASA's...The asa's run 100full, and the procurve autonegotiates to 100half. It does it for both ASA's, so it's probably not a failure on one of them, and everything works fine if I force the procurve to 100full. Has anyone else seen this issue? I've been buying more HP hardware, but I'm not keen on getting equipment that's not going to play nice with my Cisco backbone.

  Read the article

• subnetting a class c on a cisco 3825

  - by Adeodatus

  I have a class C that I want to better understand before I implement a change. Right now, ip address 192.168.0.1 255.255.255.192 ip address 192.168.0.65 255.255.255.240 secondary So, where is the 192.168.0.64 address in that mix? 192.168.0.63 should be the broadcast for the first one, and 192.168.0.65 should be the cisco secondary ip. And ... How then do I add a /28 (255.255.255.240) right before this segment: ip address 192.168.0.249 255.255.255.248 secondary In fact, I'll probably want to add it as a subinterface Can anyone help me to better understand whats going on and then how to do it?

  Read the article

• Configuring NAT and static IP on Cisco 877W

  - by David M Williams

  Hi all, I'm having trouble setting up a static IP reservation on a network. What I want to do is assign IP 192.168.1.105 to MAC address 00:21:5d:2f:58:04 and then port forward 35394 to it. If it helps, output from show ver says Cisco IOS software, C870 software (C870-ADVSECURITYK9-M), version 12.4(4)T7, release software (fc1) ROM: System bootstrap, version 12.3(8r)YI4, release software I have done this - service dhcp ip routing ip dhcp excluded-address 192.168.1.1 192.168.1.99 ip dhcp excluded-address 192.168.1.200 192.168.1.255 ip dhcp pool ClientDHCP network 192.168.1.0 255.255.255.0 default-router 192.168.1.1 dns-server 192.168.1.1 lease 7 ip dhcp pool NEO host 192.168.1.105 255.255.255.0 hardware-address 0021.5D2F.5804 ip nat inside source static tcp 192.168.1.105 35394 <PUBLIC_IP> 35394 extendable However, the machine is getting assigned IP address 192.168.1.101 not .105 ... any suggestions? Thanks !

  Read the article

• Cisco 2900 Series Routers worth the price?

  - by NickToyota

  Just wondering if anyone has experience with the cisco 2911 or 2900 series routers? I understand it is newer and similar to the 2811 but more robust. The price difference is not that much more. I am curious as to why. I am trying to determine if I should go with the 29xx or 28xx series for a medium sized company. ISP load balancing and fail over is required. T1 and ADSL lines already in place.

  Read the article

• open ports on a cisco/linksys wrt54g2 v1.5

  - by Crash893

  Im upgradeing my router from a netgear fvs318 one of the problems im running into is on the old net gear i have opend ports under the "Add Service " for our voip udp 69 tcp 80 tcp 2000 udp 22026-62025 but on the new linksys/cisco rotuer i don't see any option to just open a port i see port forwarding (which i dont want because i have more than one phone) and port triggering that i have no idea what that does. does anyone know either how to allow open ports on this router or how to use port tiggering to allow my phones to work with the ports listed above?

  Read the article

• CISCO 2911 Router configuration

  - by bala

  Device cisco 2911 router configuration support is required please. I have exchange server 2010 configured and working without any errors the problem is in cisco router configuration when exchange server sends emails out the receives WAN IP not the public ip. I have configured RDNS lookups with our MX record IP addesses that match the FQDN but all our emails are rejected because it does not match with the public ip. Receiving mails problem is not an problem all mails are coming through. i am sure i am missing something on the router configuration that does not sends the public ip, can any one help me to solve this issue. Note; I've got 1 WAN IP & 8 Public IP from ISP . Find below the running configuration. Building configuration... Current configuration : 2734 bytes ! ! Last configuration change at 06:32:13 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 ! NVRAM config last updated at 06:32:14 UTC Tue Apr 3 2012 version 15.1 service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname BSBG-LL ! boot-start-marker boot-end-marker ! ! enable secret 5 $x$xHrxxxxx5ox0 enable password 7 xx23xx5FxxE1xx044 ! no aaa new-model ! no ipv6 cef ip source-route ip cef ! ! ! ! ! ip flow-cache timeout active 1 ip domain name yourdomain.com ip name-server 213.42.20.20 ip name-server 195.229.241.222 multilink bundle-name authenticated ! ! crypto pki token default removal timeout 0 ! ! license udi pid CISCO2911/K9 ! ! username bsbg ! ! ! ! ! ! interface Embedded-Service-Engine0/0 no ip address shutdown ! interface GigabitEthernet0/0 ip address 192.168.0.9 255.255.255.0 ip flow ingress ip nat inside ip virtual-reassembly in duplex auto speed 100 no cdp enable ! interface GigabitEthernet0/1 ip address 213.42.xx.x2 255.255.255.252 ip nat outside ip virtual-reassembly in duplex auto speed auto no cdp enable ! interface GigabitEthernet0/2 no ip address shutdown duplex auto speed auto ! ip forward-protocol nd ! no ip http server no ip http secure-server ! ip nat inside source list 120 interface GigabitEthernet0/1 overload ip nat inside source static tcp 192.168.0.4 25 94.56.89.100 25 extendable ip nat inside source static tcp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static udp 192.168.0.4 53 94.56.89.100 53 extendable ip nat inside source static tcp 192.168.0.4 110 94.56.89.100 110 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.100 443 extendable ip nat inside source static tcp 192.168.0.4 587 94.56.89.100 587 extendable ip nat inside source static tcp 192.168.0.4 995 94.56.89.100 995 extendable ip nat inside source static tcp 192.168.0.4 3389 94.56.89.100 3389 extendable ip nat inside source static tcp 192.168.0.4 443 94.56.89.101 443 extendable ip nat inside source static tcp 192.168.0.12 80 94.56.89.102 80 extendable ip nat inside source static tcp 192.168.0.12 443 94.56.89.102 443 extendable ip nat inside source static tcp 192.168.0.12 3389 94.56.89.102 3389 extendable ip route 0.0.0.0 0.0.0.0 213.42.69.41 ! access-list 120 permit ip 192.168.0.0 0.0.0.255 any ! ! ! control-plane ! ! ! line con 0 exec-timeout 5 0 line aux 0 line 2 no activation-character no exec transport preferred none transport input all transport output pad telnet rlogin lapb-ta mop udptn v120 ssh stopbits 1 line vty 0 4 password 7 xx64xxD530D26086Dxx login transport input all ! scheduler allocate 20000 1000 end

  Read the article

• How to set up wireless access on a Cisco router

  - by Carlos

  Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >