Search Results

Search found 1399 results on 56 pages for 'configurations'.

Page 27/56 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

  • SQL SERVER – Installing Data Quality Services (DQS) on SQL Server 2012

    - by pinaldave
    Data Quality Services is very interesting enhancements in SQL Server 2012. My friend and SQL Server Expert Govind Kanshi have written an excellent article on this subject earlier on his blog. Yesterday I stumbled upon his blog one more time and decided to experiment myself with DQS. I have basic understanding of DQS and MDS so I knew I need to start with DQS Client. However, when I tried to find DQS Client I was not able to find it under SQL Server 2012 installation. I quickly realized that I needed to separately install the DQS client. You will find the DQS installer under SQL Server 2012 >> Data Quality Services directory. The pre-requisite of DQS is Master Data Services (MDS) and IIS. If you have not installed IIS, you can follow the simple steps and install IIS in your machine. Once the pre-requisites are installed, click on MDS installer once again and it will install DQS just fine. Be patient with the installer as it can take a bit longer time if your machine is low on configurations. Once the installation is over you will be able to expand SQL Server 2012 >> Data Quality Services directory and you will notice that it will have a new item called Data Quality Client.  Click on it and it will open the client. Well, in future blog post we will go over more details about DQS and detailed practical examples. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology Tagged: Data Quality Services

    Read the article

  • MPI Project Template for VS2010

    If you are developing MS MPI applications with Visual Studio 2010, you are probably tired of following some tedious steps for every new C++ project that you create, similar to the following:1. In Solution Explorer, right-click YourProjectName, then click Properties to open the Property Pages dialog box.2. Expand Configuration Properties and then under VC++ Directories place the cursor at the beginning of the list that appears in the Include Directories text box and then specify the location of the MS MPI C header files, followed by a semicolon, e.g.C:\Program Files\Microsoft HPC Pack 2008 SDK\Include;3. Still under Configuration Properties and under VC++ Directories place the cursor at the beginning of the list that appears in the Library Directories text box and then specify the location of the Microsoft HPC Pack 2008 SDK library file, followed by a semicolon, e.g.if you want to build/debug 32bit application:C:\Program Files\Microsoft HPC Pack 2008 SDK\Lib\i386;if you want to build/debug 64bit application:C:\Program Files\Microsoft HPC Pack 2008 SDK\Lib\amd64;4. Under Configuration Properties and then under Linker, select Input and place the cursor at the beginning of the list that appears in the Additional Dependencies text box and then type the name of the MS MPI library, i.e.msmpi.lib;5. In the code file#include "mpi.h"6. To debug the MPI project you have just setup, under Configuration Properties select Debugging and then switch the Debugger to launch combo value from Local Windows Debugger to MPI Cluster Debugger.Wouldn't it be great if at C++ project creation time you could choose an MPI Project Template that included the steps/configurations above? If you answered "yes", I have good news for you courtesy of a developer on our team (Qing). Feel free to download from Visual Studio gallery the MPI Project Template. Comments about this post welcome at the original blog.

    Read the article

  • Oracle vous invite à un atelier découverte Oracle Coherence composé d’une présentation du produit et de ses concepts, suivi par des exercices pratiques.

    - by mseika
    Oracle vous invite à un atelier découverte Oracle Coherence composé d’une présentation du produit et de ses concepts, suivi par des exercices pratiques. Objectifs : Cet atelier est destiné aux populations suivantes : architectes, développeurs, ainsi que les responsables de projets. Le format retenu (1 journée) pour cet atelier vous permettra de mesurer ce qu’Oracle Coherence peut apporter à votre entreprise ou vos clients au travers de quelques exercices. Cette journée de prise en main vous permettra de mieux comprendre : Le positionnement d’Oracle Coherence au travers des différents cas d’utilisation rencontrés sur le marché français Les concepts technique d’Oracle Coherence Création d’une grille de données distribuée Insérer et lire des données dans un cache distribué Effectuer une requête sur un cache distribué Effectuer une aggrégation sur un cache distribué Etc… En fonction de votre niveau il y aura toujours un exercice supplémentaire à réaliser… Pré-requis :Matériel : Pour la session, chaque participant doit disposer de son pc portable avec un minimum de 4Go de RAM (idéalement Windows XP ou 7). Sur le PC on doit trouver déjà installés les éléments suivants : un Jdk 6, Eclipse dans une version récente, et Coherence 3.7. Technique : Eclipse et  Programmation Java niveau débutant (vous devez être à l’aise pour créer un projet Java, utiliser des librairies, compiler, exécuter, créer des configurations de lancement Eclipse, etc…). Durée : 1 jour L'équipe Enablement Oracle France.NB: Merci de prévoir les frais liés au déjeuner qui n'est pas pris en charge par Oracle

    Read the article

  • What is controlling the desktop display?

    - by Bart Silverstrim
    I have two Ubuntu systems and in the course of changing configurations something has become muddled. I have disabled Unity in favor of gnome shell, the older style display of the desktop. Then I installed xfce 4. Seemed everything would be working okay, and for the most part it does. Except I noticed that on one system there's something else controlling settings. On one, if I right click the desktop, I get the menu with the options: open in new window create launcher... create url link... create folder... create from template -> open terminal here paste desktop settings... properties... applications -> On system two, right clicking brings up the menu: Create new folder Create new document -> organize desktop by name keep aligned paste Change Desktop Background Additionally, even though I set the background with the xfce settings manager, on system two that background will appear for a few seconds before it's replaced by something that looks like a background from Ubuntu's original desktop. And it's being controlled by what comes up with the "change desktop background" when right clicking, which isn't the xfce settings manager. On the first system, that right click does bring up the xfce settings tool. In short, something is controlling/overriding the xfce settings on machine two, but I can't find what file or configuration tool is doing it. How can I get system two to behave as system one, giving control of settings and configuration of X to XFCE's tools?

    Read the article

  • Keyboard locking up in Visual Studio 2010, Part 2

    - by Jim Wang
    Last week I posted about looking into the keyboard locking up issue in Visual Studio.  So far it looks like not a lot of people have replied to provide concrete repro steps, which confirms my suspicion that this is somewhat of a random issue. So at this point, I have a couple of choices.  I can either wait for somebody in the community to provide a repro of the problem that I can reliably run into, or I can do the work myself. I’m going to do both, so while I’m waiting for more possible bug reports, I’m going to write a tool that models the behavior of a typical Visual Studio user and use that to hopefully isolate the problem. I’ve chosen to go with this path since given the information in the bug reports, it seems people hit the issue with many different configurations in many different scenarios.  This means that me sitting down without any solid repro steps is likely not going to be a good use of time.  Instead, I’m going to go with a model-based testing approach where I will define a series of actions that a user in VS can do, and then proceed to run my model.  I’ll let you guys know how this works out for isolating bugs :) I’m using an internal tool for the model engine and AutoIt for the UI automation (I want something lightweight for a one-off).  One of the challenges will be getting feedback: AutoIt is great at driving, but not so great at understanding what success and failure means.

    Read the article

  • Issue 15: SVP Focus

    - by rituchhibber
         SVP FOCUS FOCUS -- Chris Baker SVP Oracle Worldwide ISV-OEM-Java Sales Chris Baker is the Global Head of ISV/OEM Sales responsible for working with ISV/OEM partners to maximise Oracle's business through those partners, whilst maximising those partners’ business to their end users. Chris works with partners, customers, innovators, investors and employees to develop innovative business solutions using Oracle products, services and skills. RESOURCES -- Oracle PartnerNetwork (OPN) OPN Solutions Catalog Oracle Exastack Program Oracle Exastack Optimized Oracle Cloud Computing Oracle Engineered Systems Oracle and Java SUBSCRIBE FEEDBACK PREVIOUS ISSUES "By taking part in marketing activities, our partners accelerate their sales cycles." -- Firstly, could you please explain Oracle's current strategy for ISV partners, globally and in EMEA? Oracle customers use independent software vendor (ISV) applications to run their businesses. They use them to generate revenue and to fulfil obligations to their own customers. Our strategy is very straight-forward. We want all of our ISV partners and OEMs to concentrate on the things that they do the best—building applications to meet the unique industry and functional requirements of their customer. We want to ensure that we deliver a best-in-class application platform so ISVs are free to concentrate their effort on their application functionality and user experience We invest over four billion dollars in research and development every year, and we want our ISVs to benefit from all of that investment in operating systems, virtualisation, databases, middleware, engineered systems, and other hardware. By doing this, we help them to reduce their costs, gain more consistency and agility for quicker implementations, and also rapidly differentiate themselves from other application vendors. It's all about simplification because we believe that around 25 to 30 percent of the development costs incurred by many ISVs are caused by customising infrastructure and have nothing to do with their applications. Our strategy is to enable our ISV partners to standardise their application platform using engineered architecture, so they can write once to the Oracle stack and deploy seamlessly in the cloud, on-premise, or in hybrid deployments. It's really important that architecture is the same in order to keep cost and time overheads at a minimum, so we provide standardisation and an environment that enables our ISVs to concentrate on the core business that makes them the most money and brings them success. How do you believe this strategy is helping the ISVs to work hand-in-hand with Oracle to ensure that end customers get the industry-leading solutions that they need? We work with our ISVs not just to help them be successful, but also to help them market themselves. We have something called the 'Oracle Exastack Ready Program', which enables ISVs to publicise themselves as 'Ready' to run the core software platforms that run on Oracle's engineered systems including Exadata and Exalogic. So, for example, they can become 'Database Ready' which means that they use the latest version of Oracle Database and therefore can run their application without modification on Exadata or the Oracle Database Appliance. Alternatively, they can become WebLogic Ready, Oracle Linux Ready and Oracle Solaris Ready which means they run on the latest release and therefore can run their application, with no new porting work, on Oracle Exalogic. Those 'Ready' logos are important in helping ISVs advertise to their customers that they are using the latest technologies which have been fully tested. We now also have Exadata Ready and Exalogic Ready programmes which allow ISVs to promote the certification of their applications on these platforms. This highlights these partners to Oracle customers as having solutions that run fluently on the Oracle Exadata Database Machine, the Oracle Exalogic Elastic Cloud or one of our other engineered systems. This makes it easy for customers to identify solutions and provides ISVs with an avenue to connect with Oracle customers who are rapidly adopting engineered systems. We have also taken this programme to the next level in the shape of 'Oracle Exastack Optimized' for partners whose applications run best on the Oracle stack and have invested the time to fully optimise application performance. We ensure that Exastack Optimized partner status is promoted and supported by press releases, and we help our ISVs go to market and differentiate themselves through the use of our technology and the standardisation it delivers. To date we have had several hundred organisations successfully work through our Exastack Optimized programme. How does Oracle's strategy of offering pre-integrated open platform software and hardware allow ISVs to bring their products to market more quickly? One of the problems for many ISVs is that they have to think very carefully about the technology on which their solutions will be deployed, particularly in the cloud or hosted environments. They have to think hard about how they secure these environments, whether the concern is, for example, middleware, identity management, or securing personal data. If they don't use the technology that we build-in to our products to help them to fulfil these roles, they then have to build it themselves. This takes time, requires testing, and must be maintained. By taking advantage of our technology, partners will now know that they have a standard platform. They will know that they can confidently talk about implementation being the same every time they do it. Very large ISV applications could once take a year or two to be implemented at an on-premise environment. But it wasn't just the configuration of the application that took the time, it was actually the infrastructure - the different hardware configurations, operating systems and configurations of databases and middleware. Now we strongly believe that it's all about standardisation and repeatability. It's about making sure that our partners can do it once and are then able to roll it out many different times using standard componentry. What actions would you recommend for existing ISV partners that are looking to do more business with Oracle and its customer base, not only to maximise benefits, but also to maximise partner relationships? My team, around the world and in the EMEA region, is available and ready to talk to any of our ISVs and to explore the possibilities together. We run programmes like 'Excite' and 'Insight' to help us to understand how we can help ISVs with architecture and widen their environments. But we also want to work with, and look at, new opportunities - for example, the Machine-to-Machine (M2M) market or 'The Internet of Things'. Over the next few years, many millions, indeed billions of devices will be collecting massive amounts of data and communicating it back to the central systems where ISVs will be running their applications. The only way that our partners will be able to provide a single vendor 'end-to-end' solution is to use Oracle integrated systems at the back end and Java on the 'smart' devices collecting the data—a complete solution from device to data centre. So there are huge opportunities to work closely with our ISVs, using Oracle's complete M2M platform, to provide the infrastructure that enables them to extract maximum value from the data collected. If any partners don't know where to start or who to contact, then they can contact me directly at [email protected] or indeed any of our teams across the EMEA region. We want to work with ISVs to help them to be as successful as they possibly can through simplification and speed to market, and we also want all of the top ISVs in the world based on Oracle. What opportunities are immediately opened to new ISV partners joining the OPN? As you know OPN is very, very important. New members will discover a huge amount of content that instantly becomes accessible to them. They can access a wealth of no-cost training and enablement materials to build their expertise in Oracle technology. They can download Oracle software and use it for development projects. They can help themselves become more competent by becoming part of a true community and uncovering new opportunities by working with Oracle and their peers in the Oracle Partner Network. As well as publishing massive amounts of information on OPN, we also hold our global Oracle OpenWorld event, at which partners play a huge role. This takes place at the end of September and the beginning of October in San Francisco. Attending ISV partners have an unrivalled opportunity to contribute to elements such as the OpenWorld / OPN Exchange, at which they can talk to other partners and really begin thinking about how they can move their businesses on and play key roles in a very large ecosystem which revolves around technology and standardisation. Finally, are there any other messages that you would like to share with the Oracle ISV community? The crucial message that I always like to reinforce is architecture, architecture and architecture! The key opportunities that ISVs have today revolve around standardising their architectures so that they can confidently think: "I will I be able to do exactly the same thing whenever a customer is looking to deploy on-premise, hosted or in the cloud". The right architecture is critical to being competitive and to really start changing the game. We want to help our ISV partners to do just that; to establish standard architecture and to seize the opportunities it opens up for them. New market opportunities like M2M are enormous - just look at how many devices are all around you right now. We can help our partners to interface with these devices more effectively while thinking about their entire ecosystem, rather than just the piece that they have traditionally focused upon. With standardised architecture, we can help people dramatically improve their speed, reach, agility and delivery of enhanced customer satisfaction and value all the way from the Java side to their centralised systems. All Oracle ISV partners must take advantage of these opportunities, which is why Oracle will continue to invest in and support them. Oracle OpenWorld 2010 Whether you attended Oracle OpenWorld 2009 or not, don't forget to save the date now for Oracle OpenWorld 2010. The event will be held a little earlier next year, from 19th-23rd September, so please don't miss out. With thousands of sessions and hundreds of exhibits and demos already lined up, there's no better place to learn how to optimise your existing systems, get an inside line on upcoming technology breakthroughs, and meet with your partner peers, Oracle strategists and even the developers responsible for the products and services that help you get better results for your end customers. Register Now for Oracle OpenWorld 2010! Perhaps you are interested in learning more about Oracle OpenWorld 2010, but don't wish to register at this time? Great! Please just enter your contact information here and we will contact you at a later date. How to Exhibit at Oracle OpenWorld 2010 Sponsorship Opportunities at Oracle OpenWorld 2010 Advertising Opportunities at Oracle OpenWorld 2010 -- Back to the welcome page

    Read the article

  • How to properly deny Railo directory access through Apache

    - by Sn3akyP3t3
    I've been battle tested on this and failed to achieve my goal which is to deny all access to all directories except the Public directory and only allow access to all all other directories with specific IP addresses. To get Railo+Apache+Tomcat installed I pretty much followed this script: https://github.com/talltroym/Railo-Ubuntu-Installer-Script then verified settings with this tutorial: http://blog.nictunney.com/2012/03/railo-tomcat-and-apache-on-amazon-ec2.html From the installation script these mods are enabled: sudo a2enmod ssl sudo a2enmod proxy sudo a2enmod proxy_http sudo a2enmod rewrite sudo a2ensite default-ssl Outside of the script I copied the sites-available to sites-enabled then reloaded Apache. I have a directory created for Railo cmfl located at /var/www/Railo/ Navigating the browser to http ://Server_IP_Address/Railo forces ssl and relocates to https ://Server_IP_Address/Railo which shows off index.cfm. Not providing index.cfm and omitting https indicates that the DirectoryIndex directive and RewriteCond of Apache appears to be working for the sites-enabled VirtualHost. The problem I'm encountering is that I cannot seem to deny access to all directories except Public. My directory structure is rather simple and looks like this: Railo error Public NotPublic Sandbox These are my sites-enabled configurations: <VirtualHost *:80> ServerAdmin webmaster@localhost DocumentRoot /var/www #Default Deny All to prevent walking backwards in file system Alias /Railo/ "/var/www/Railo/" <Directory ~ ".*/Railo/(?!Public).*"> Order Deny,Allow Deny from All </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> DirectoryIndex index.cfm index.cfml default.cfm default.cfml index.htm index.html index.cfc RewriteEngine on RewriteCond %{SERVER_PORT} !^443$ RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [L,R] </VirtualHost> and <IfModule mod_ssl.c> <VirtualHost _default_:443> ServerAdmin webmaster@localhost DocumentRoot /var/www Alias /Railo/ "/var/www/Railo/" <Directory ~ "/var/www/Railo/(?!Public).*"> Order Deny,Allow Deny from All </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/ssl_access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> # SSL Engine Switch: # Enable/Disable SSL for this virtual host. SSLEngine on # A self-signed (snakeoil) certificate can be created by installing # the ssl-cert package. See # /usr/share/doc/apache2.2-common/README.Debian.gz for more info. # If both key and certificate are stored in the same file, only the # SSLCertificateFile directive is needed. SSLCertificateFile /etc/ssl/certs/ssl-cert-snakeoil.pem SSLCertificateKeyFile /etc/ssl/private/ssl-cert-snakeoil.key # Server Certificate Chain: # Point SSLCertificateChainFile at a file containing the # concatenation of PEM encoded CA certificates which form the # certificate chain for the server certificate. Alternatively # the referenced file can be the same as SSLCertificateFile # when the CA certificates are directly appended to the server # certificate for convinience. #SSLCertificateChainFile /etc/apache2/ssl.crt/server-ca.crt # Certificate Authority (CA): # Set the CA certificate verification path where to find CA # certificates for client authentication or alternatively one # huge file containing all of them (file must be PEM encoded) # Note: Inside SSLCACertificatePath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCACertificatePath /etc/ssl/certs/ #SSLCACertificateFile /etc/apache2/ssl.crt/ca-bundle.crt # Certificate Revocation Lists (CRL): # Set the CA revocation path where to find CA CRLs for client # authentication or alternatively one huge file containing all # of them (file must be PEM encoded) # Note: Inside SSLCARevocationPath you need hash symlinks # to point to the certificate files. Use the provided # Makefile to update the hash symlinks after changes. #SSLCARevocationPath /etc/apache2/ssl.crl/ #SSLCARevocationFile /etc/apache2/ssl.crl/ca-bundle.crl # Client Authentication (Type): # Client certificate verification type and depth. Types are # none, optional, require and optional_no_ca. Depth is a # number which specifies how deeply to verify the certificate # issuer chain before deciding the certificate is not valid. #SSLVerifyClient require #SSLVerifyDepth 10 # Access Control: # With SSLRequire you can do per-directory access control based # on arbitrary complex boolean expressions containing server # variable checks and other lookup directives. The syntax is a # mixture between C and Perl. See the mod_ssl documentation # for more details. #<Location /> #SSLRequire ( %{SSL_CIPHER} !~ m/^(EXP|NULL)/ \ # and %{SSL_CLIENT_S_DN_O} eq "Snake Oil, Ltd." \ # and %{SSL_CLIENT_S_DN_OU} in {"Staff", "CA", "Dev"} \ # and %{TIME_WDAY} >= 1 and %{TIME_WDAY} <= 5 \ # and %{TIME_HOUR} >= 8 and %{TIME_HOUR} <= 20 ) \ # or %{REMOTE_ADDR} =~ m/^192\.76\.162\.[0-9]+$/ #</Location> # SSL Engine Options: # Set various options for the SSL engine. # o FakeBasicAuth: # Translate the client X.509 into a Basic Authorisation. This means that # the standard Auth/DBMAuth methods can be used for access control. The # user name is the `one line' version of the client's X.509 certificate. # Note that no password is obtained from the user. Every entry in the user # file needs this password: `xxj31ZMTZzkVA'. # o ExportCertData: # This exports two additional environment variables: SSL_CLIENT_CERT and # SSL_SERVER_CERT. These contain the PEM-encoded certificates of the # server (always existing) and the client (only existing when client # authentication is used). This can be used to import the certificates # into CGI scripts. # o StdEnvVars: # This exports the standard SSL/TLS related `SSL_*' environment variables. # Per default this exportation is switched off for performance reasons, # because the extraction step is an expensive operation and is usually # useless for serving static content. So one usually enables the # exportation for CGI and SSI requests only. # o StrictRequire: # This denies access when "SSLRequireSSL" or "SSLRequire" applied even # under a "Satisfy any" situation, i.e. when it applies access is denied # and no other module can change it. # o OptRenegotiate: # This enables optimized SSL connection renegotiation handling when SSL # directives are used in per-directory context. #SSLOptions +FakeBasicAuth +ExportCertData +StrictRequire <FilesMatch "\.(cgi|shtml|phtml|php)$"> SSLOptions +StdEnvVars </FilesMatch> <Directory /usr/lib/cgi-bin> SSLOptions +StdEnvVars </Directory> # SSL Protocol Adjustments: # The safe and default but still SSL/TLS standard compliant shutdown # approach is that mod_ssl sends the close notify alert but doesn't wait for # the close notify alert from client. When you need a different shutdown # approach you can use one of the following variables: # o ssl-unclean-shutdown: # This forces an unclean shutdown when the connection is closed, i.e. no # SSL close notify alert is send or allowed to received. This violates # the SSL/TLS standard but is needed for some brain-dead browsers. Use # this when you receive I/O errors because of the standard approach where # mod_ssl sends the close notify alert. # o ssl-accurate-shutdown: # This forces an accurate shutdown when the connection is closed, i.e. a # SSL close notify alert is send and mod_ssl waits for the close notify # alert of the client. This is 100% SSL/TLS standard compliant, but in # practice often causes hanging connections with brain-dead browsers. Use # this only for browsers where you know that their SSL implementation # works correctly. # Notice: Most problems of broken clients are also related to the HTTP # keep-alive facility, so you usually additionally want to disable # keep-alive for those clients, too. Use variable "nokeepalive" for this. # Similarly, one has to force some clients to use HTTP/1.0 to workaround # their broken HTTP/1.1 implementation. Use variables "downgrade-1.0" and # "force-response-1.0" for this. BrowserMatch "MSIE [2-6]" \ nokeepalive ssl-unclean-shutdown \ downgrade-1.0 force-response-1.0 # MSIE 7 and newer should be able to use keepalive BrowserMatch "MSIE [17-9]" ssl-unclean-shutdown DirectoryIndex index.cfm index.cfml default.cfm default.cfml index.htm index.html #Proxy .cfm and cfc requests to Railo ProxyPassMatch ^/(.+.cf[cm])(/.*)?$ http://127.0.0.1:8888/$1 ProxyPassReverse / http://127.0.0.1:8888/ #Deny access to admin except for local clients <Location /railo-context/admin/> Order deny,allow Deny from all # Allow from <Omitted> # Allow from <Omitted> Allow from 127.0.0.1 </Location> </VirtualHost> </IfModule> The apache2.conf includes the following: # Include the virtual host configurations: Include sites-enabled/ <IfModule !mod_jk.c> LoadModule jk_module /usr/lib/apache2/modules/mod_jk.so </IfModule> <IfModule mod_jk.c> JkMount /*.cfm ajp13 JkMount /*.cfc ajp13 JkMount /*.do ajp13 JkMount /*.jsp ajp13 JkMount /*.cfchart ajp13 JkMount /*.cfm/* ajp13 JkMount /*.cfml/* ajp13 # Flex Gateway Mappings # JkMount /flex2gateway/* ajp13 # JkMount /flashservices/gateway/* ajp13 # JkMount /messagebroker/* ajp13 JkMountCopy all JkLogFile /var/log/apache2/mod_jk.log </IfModule> I believe I understand most of this except the jk_module inclusion which I've noticed has an error that shows up in the logs that I can't sort out: [warn] No JkShmFile defined in httpd.conf. Using default /etc/apache2/logs/jk-runtime-status I've checked my Regular expression against the paths of the directories with RegexBuddy just to be sure that I wasn't correct. The problem doesn't appear to be Regex related although I may have something incorrect in the Directory directive. The Location directive seems to be working correctly for blocking out Railo admin site access.

    Read the article

  • Partner Infoline & Service Portal

    - by uwes
    As an EMEA-wide team we're supporting the daily work of our partners. Our team consists of 24 sales consultants, one third is specialized on the Partner Infoline. Partner Infoline's main focus is to deliver actively and reactively technical pre sales knowledge about the Oracle hardware portfolio to our partners.With infoline we assist our partners in their daily work, furthermore we help to educate our partners to be self sufficient in all aspects and questions about hardware configurations and hardware quotes. For our Infoline Service we use a ticketing system called Service Portal which is widely used within Oracle and delivers a good and stable functionality and availability. Our Infoline-Service provides answers to questions concerning technical pre-sales matters that are related to hardware and the corresponding hardware related software.* You can address these types of questions by sending them to our mailing list: [email protected] The serviceportal will send you an auto-reply including a unique reference number, which will be the identification for your request until it is closed. Depending on the complexity of the request, it might be necessary to forward it to our specialists (servers, storage, tape, Solaris etc.) located whole over Europe. In order to make the whole process smooth here are some recommendations: write your request in English; saves translation-time, when it has to be forwarded to the specialists stating clearly in the title your interest area, like for example "memory in M4000 server". one request/one subject; makes it easier to maintain and keep the correspondence clear and simple. The rule of the service is to provide an answer quick, which means the vast majority of the requests are answered within a couple of hours. However please keep in mind that some requests may need extra work by involving the appropriate person within Europe or even in US. Therefore there is no official SLA for this service. * This excludes Oracle "classic" products and post-sales support. The latter should still be addressed through MOS (http://support.oracle.com)

    Read the article

  • iOS: Using Jenkins for nightly internal builds (TestFlight), plus frequent client builds

    - by Amy Worrall
    I'm an iOS dev, working for a small agency. I'm currently on a few smaller projects where I'm the only developer. We recently acquired a Jenkins server, but each project is left to fend for themselves as for how to use it. I'd like to use it for making and distributing builds. My ideal would be: Every commit is built as a single IPA that is placed in a HTTP-accessible location. (It only needs to keep the latest one, otherwise the disk would fill up — some of our apps are 500MB or more.) Once a day it makes a build, signs it with our internal provisioning profile, tacks a build number onto the end of the version number, and sends it to our internal TestFlight team. When manually prompted, it builds the latest commit, gives it a manually specified version number, signs it with the client's provisioning profile and sends it to TestFlight. I'm pretty new to Jenkins. The developer who set up the server is running it on one of our projects, so I know it has the right stuff installed to do Xcode builds. I believe he's only using it to run unit tests though, not to do any of the code signing, IPA creation or TestFlight stuff. So my questions: I've listed three distinct kinds of build. How does Jenkins cope with that? I see there's a "build triggers" section in the config for a Jenkins project, but it doesn't seem to mention different types of build. Should I just set up multiple Jenkins projects, called "App X (continuous)", "App X (nightly)" and "App X (client)"? How do I specify the provisioning profile through Jenkins? If there isn't a way, I guess I could make different configurations in the Xcode project… Has anyone else used Jenkins to actually do the release (i.e. build and push to TestFlight) of beta builds of their apps? Is it a good idea? Or should I continue just doing it manually?

    Read the article

  • JDBC Connection Pools in Glassfish

    - by Dana Singleterry
    I've been attempting to configure Glassfish 3.1.2.2 for ADF 11g and the need arose to create a jdbc connection pool to my Oracle XE 11g database. While this is really very trivial there were no samples of how to do this and documentation, while good, rarely ever provides concrete examples. After fumbling around for a few minutes searching for an example I gave up and figured it out on my own. Here are the steps for any of you that may be in need. This can be done either via the Glassfish command line tool asadmin or through the admin console. I'm doing this through the admin console. Start Glassfish and connect to the admin console with the credentials you defined at installation: http://localhost:4848 Navigate to Resources | JDBC | JDBC Connection Pools and select New. Be sure to enter Resource Type & Datasource Classname under General Settings tab. You can go with the defaults for Pool Settings etc... View Image Go to the Additional Properties tab and create username, password, and url properties with the respective values. View Image Navigate to Resources | JDBC | JDBC Resources and select New. Be sure to enter the JNDI Name and select the Pool Name for the jdbc connection pool you created previously. View Image Navigate to Configurations | server-config | JVM Settings and select the JVM Options tab. Add the values highlighted: -Doracle.jdbc.J2EE13Compliant=true is used to make sure the driver behaves in a JEE-compliant manner. View Image To integrate the JDBC driver into a GlassFish Server domain, copy the JAR files into the domain-dir/lib directory, then restart the server. The JAR file for the Oracle 11 database driver is ojdbc6dms.jar. An upcoming entry will demonstrate configuring Glassfish for Oracle ADF Applications.

    Read the article

  • Unlock More Value: Oracle Platinum Services at Oracle OpenWorld

    - by Oracle OpenWorld Blog Team
    In a bold move to provide even more value to customers who adopt the extreme performance of Oracle Exalogic Elastic Cloud, Oracle Exadata, and Oracle SPARC SuperCluster, Oracle recently launched a set of enhanced services that help IT managers decrease the cost and complexity of supporting their IT environments: Oracle Platinum Services. Learn more by attending the Oracle Platinum Services: Unlock More Value with Advanced Support session at Oracle OpenWorld. In this session, Oracle shares how to achieve maximum performance and lower total cost of ownership through certified configurations for Oracle engineered systems and Oracle Platinum Services. Hear about the industry-leading Oracle Platinum Services offering and tools already used by Oracle customers, including remote fault monitoring, faster response times and patching services.Vincent Biddlecombe, chief technology officer of Transplace, a third-party logistics provider, is seeing results already. He says “The Platinum Services offering has been a great addition to Oracle Premier Support. This level of support is unique in my experience. We saw results very quickly. Our experience has exceeded my expectations.” The patching services have enabled Transplace to stay up to date on the latest improvements.  According to Biddlecombe, “We've gone from being eight patches behind to completely up to date, and I'm extremely happy.”  Visit us on Monday, October 1 at 12:15 p.m. and become familiar with industry-leading Oracle Platinum Services. For more information on Oracle Customer Support Services sessions and events, go to Oracle Customer Support Services.

    Read the article

  • Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell

    - by SQLOS Team
    Manage SQL Server Connectivity through Windows Azure Virtual Machines Remote PowerShell Blog This blog post comes from Khalid Mouss, Senior Program Manager in Microsoft SQL Server. Overview The goal of this blog is to demonstrate how we can automate through PowerShell connecting multiple SQL Server deployments in Windows Azure Virtual Machines. We would configure TCP port that we would open (and close) though Windows firewall from a remote PowerShell session to the Virtual Machine (VM). This will demonstrate how to take the advantage of the remote PowerShell support in Windows Azure Virtual Machines to automate the steps required to connect SQL Server in the same cloud service and in different cloud services.  Scenario 1: VMs connected through the same Cloud Service 2 Virtual machines configured in the same cloud service. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually required. Step 1 – Provision VMs and Configure Ports   Provision VM1; named DemoVM1 as follows (see examples screenshots below if using the portal):   Provision VM2 (DemoVM2) with PowerShell Remoting enabled and connected to DemoVM1 above (see examples screenshots below if using the portal): After provisioning of the 2 VMs above, here is the default port configurations for example: Step2 – Verify / Confirm the TCP port used by the database Engine By the default, the port will be configured to be 1433 – this can be changed to a different port number if desired.   1. RDP to each of the VMs created below – this will also ensure the VMs complete SysPrep(ing) and complete configuration 2. Go to SQL Server Configuration Manager -> SQL Server Network Configuration -> Protocols for <SQL instance> -> TCP/IP - > IP Addresses   3. Confirm the port number used by SQL Server Engine; in this case 1433 4. Update from Windows Authentication to Mixed mode   5.       Restart SQL Server service for the change to take effect 6.       Repeat steps 3., 4., and 5. For the second VM: DemoVM2 Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <username> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) Your will then be prompted to enter the password. Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok. Step 5 – Now connect from DemoVM2 to DB instance in DemoVM1 Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.   Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can longer connect from VM3 remotely to VM1. Scenario 2: VMs provisioned in different Cloud Services 2 Virtual machines configured in different cloud services. Both VMs running different SQL Server instances on them. Both VMs configured with remote PowerShell turned on to be able to run PS and other commands directly into them remotely in order to re-configure them to allow incoming SQL connections from a remote VM or on on-premise machine(s). Note: RDP (Remote Desktop Protocol) is kept configured in both VMs by default to be able to remote connect to them and check the connections to SQL instances for demo purposes only; but not actually needed. Step 1 – Provision new VM3 Provision VM3; named DemoVM3 as follows (see examples screenshots below if using the portal): After provisioning is complete, here is the default port configurations: Step 2 – Add public port to VM1 connect to from VM3’s DB instance Since VM3 and VM1 are not connected in the same cloud service, we will need to specify the full DNS address while connecting between the machines which includes the public port. We shall add a public port 57000 in this case that is linked to private port 1433 which will be used later to connect to the DB instance. Step 3 – Remote Powershell to DemoVM1 Enter-PSSession -ComputerName condemo.cloudapp.net -Port 61503 -Credential <UserName> -UseSSL -SessionOption (New-PSSessionOption -SkipCACheck -SkipCNCheck) You will then be prompted to enter the password.   Step 4 – Open 1433 port in the Windows firewall netsh advfirewall firewall add rule name="DemoVM1Port" dir=in localport=1433 protocol=TCP action=allow Output: Ok. netsh advfirewall firewall show rule name=DemoVM1Port Rule Name:                            DemoVM1Port ---------------------------------------------------------------------- Enabled:                              Yes Direction:                            In Profiles:                             Domain,Private,Public Grouping:                             LocalIP:                              Any RemoteIP:                             Any Protocol:                             TCP LocalPort:                            1433 RemotePort:                           Any Edge traversal:                       No Action:                               Allow Ok.   Step 5 – Now connect from DemoVM3 to DB instance in DemoVM1 RDP into VM3, launch SSM and Connect to VM1’s DB instance as follows. You must specify the full server name using the DNS address and public port number configured above. Step 6 – Close port 1433 in the Windows firewall netsh advfirewall firewall delete rule name=DemoVM1Port   Output: Deleted 1 rule(s). Ok. netsh advfirewall firewall show  rule name=DemoVM1Port No rules match the specified criteria.  Step 7 – Try to connect from DemoVM2 to DB Instance in DemoVM1  Because port 1433 has been closed (in step 6) in the Windows Firewall in VM1 machine, we can no longer connect from VM3 remotely to VM1. Conclusion Through the new support for remote PowerShell in Windows Azure Virtual Machines, one can script and automate many Virtual Machine and SQL management tasks. In this blog, we have demonstrated, how to start a remote PowerShell session, re-configure Virtual Machine firewall to allow (or disallow) SQL Server connections. References SQL Server in Windows Azure Virtual Machines   Originally posted at http://blogs.msdn.com/b/sqlosteam/

    Read the article

  • Microsoft Sync Framework

    - by kaleidoscope
    Introduction It is a platform that enables collaboration and offline access for applications, services and devices. Sync framework features technologies and tools that enable roaming, data sharing and taking data offline. Moreover, developers can build synchronization ecosystems that integrate any application with data from any store, by using any protocol over any network. Highlights * Add sync support to new and existing applications, services and devices * Enable collaboration and offline capabilities for any application * Roam and share information form any data store, over any protocol and over any network configuration * Leverage sync capabilities exposed in Microsoft technologies to create sync ecosystems * Extend the architecture to support custom data types including files Benefits of using Sync Framework * An extensible model that lets you integrate multiple data sources into a synchronization ecosystems. * A managed API for all components and a native API for select components. * Conflict handling for automatic and custom resolution schemes. * Filters that let you synchronize a subset of data, such as only those files that contain images. * A compact and efficient metadata model that enables synchronization for virtually any participant, without significant changes to the data store: - Any data store     Add synchronization to a wide range of applications, services and devices. - Any data type     Introduce new data types to synchronize. - Any protocol     Use existing architectures and protocols to synchronize data. The transport – agnostic architecture allows integration of synchronization into a variety of protocols, including over-the-air and embedded devices. - Any network configuration     Enable synchronization for your applications, devices and services in true peer-to-peer or hub-and-spoke configurations. Easily recover from network interruptions. Reduce network traffic by efficiently selecting changes to synchronize. Technorati Tags: Anish Sharma,Microsoft Sync Framework

    Read the article

  • Announcing: Oracle Enterprise Manager 12c Delivers Advanced Self-Service Automation for Oracle Database 12c Multitenant

    - by Scott McNeil
    New Self-Service Driven Provisioning of Pluggable Databases Today Oracle announced new capabilities that support managing the full lifecycle of pluggable database as a service in Oracle Enterprise Manager 12c Release 3 (12.1.0.3). This latest release builds on the existing capabilities to provide advanced automation for deploying database as a service using Oracle Database 12c Multitenant option. It takes it one step further by offering pluggable database as a service through Oracle Enterprise Manager 12c self-service portal providing customers with fast provisioning of database cloud services with minimal time and effort. This is a significant addition to Oracle Enterprise Manager 12c’s existing portfolio of cloud services that includes infrastructure as a service, database as a service, testing as a service, and Java platform as a service. The solution provides a self-service mechanism to provision pluggable databases allowing users to request and access database(s) on-demand. The self-service operations are also enabled through REST APIs allowing customers to integrate with third-party automation systems or their custom enterprise portals. Benefits Self-service provisioning allows rapid access to pluggable database as a service for hosting or certifying applications on Oracle Database 12c Self-service driven migration to pluggable database as a service in order to migrate a pre-Oracle Database 12c database to a pluggable database as a service model and test the consolidation strategy Single service catalog for all approved pluggable database as a service configurations which helps customers achieve standardization while catering to all applications and users in the enterprise Resource guarantee via database resource manager (and IORM on Oracle Exadata) that enables deployment of mixed workloads in a shared environment Quota, role based access, and policy based management that enforces governance and reduces administrative overhead Chargeback or showback which improves metering and accountability for services consumed by each pluggable database Comprehensive REST APIs that support integration with ticketing or change management systems, and or with other self-service portals Minimal administrative and maintenance overhead through self-managing automation that allows for intelligent placement of pluggable databases To understand how pluggable database as a service works, watch this quick demo: Stay Connected: Twitter | Facebook | YouTube | Linkedin | Newsletter Download the Oracle Enterprise Manager Cloud Control12c Mobile app

    Read the article

  • Cluster Nodes as RAID Drives

    - by BuckWoody
    I'm unable to sleep tonight so I thought I would push this post out VERY early. When you don't sleep your mind takes interesting turns, which can be a good thing. I was watching a briefing today by a couple of friends as they were talking about various ways to arrange a Windows Server Cluster for SQL Server. I often see an "active" node of a cluster with a "passive" node backing it up. That means one node is working and accepting transactions, and the other is not doing any work but simply "standing by" waiting for the first to fail over. The configuration in the demonstration I saw was a bit different. In this example, there were three nodes that were actively working, and a fourth standing by for all three. I've put configurations like this one into place before, but as I was looking at their architecture diagram, it looked familar - it looked like a RAID drive setup! And that's not a bad way to think about your cluster arrangements. The same concerns you might think about for a particular RAID configuration provides a good way to think about protecting your systems in general. So even if you're not staying awake all night thinking about SQL Server clusters, take this post as an opportunity for "lateral thinking" - a way of combining in your mind the concepts from one piece of knowledge to another. You might find a new way of making your technical environment a little better. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • BI Applications 7.9.6.3 and EBS 12.1.3 Vision: Integrated Demo Environments

    - by Mike.Hallett(at)Oracle-BI&EPM
    If you need a combined BI-Applications + eBusiness Suite Applications demonstration environment, or for proof of concept work for your customers, then these versions of images on Oracle Virtual Box are now available for partners to download and use.  To get access to these images, Partners must be OPN members, specialised in OBI or BI-Apps.   This is an integrated Demo/Test Drive/POC/Self Enablement environment including two separate images (in English) representing the entire Oracle Stack – Applications, Middleware, Database, Operating System and Virtual Machine. Minimum Hardware requirements for each image to run separately 4GB RAM Minimum Hardware requirements for both images to run concurrently 8GB RAM Dual CPU 64 bit OS   BI Applications 7.9.6.3 Linux based and running on Oracle Virtual Box and compatible with OVM Image Content: BI Application Analytics demo data extracted from EBS 12.1.3 Vision for Financials and HR using EBS 12.1.3 Vision (image supplied) Built Integration to EBS 12.1.3 Vision image (provided). Fully functional BI Applications 7.9.6.3 software install and configuration Image can be connected to load any data from any other compatible source system. BI Apps Demo data is based on OOTB EBS Vision 12.1.3 Configured to run BI Apps data load for all other modules of EBS 12.1.3 Vision. Includes OBIEE Sample demonstration content Documented scripts for running presentations, demonstrations and Test Drives Image Size: 34GB zip, 84GB unzip.  Min Hardware 4GB RAM         EBS Vision 12.1.3 Linux based and running on Oracle Virtual Box and compatible with OVM Image Content: eBusiness Suite (EBS) Applications Vision 12.1.3 Standard Vision instance with all given setups, configurations and data Source system for BI Apps 7.9.6.3 Image Size: 76GB zip, 300GB unzip.  Min Hardware 4GB RAM Distribution: The Virtual Box images are posted on an external FTP server @ BI Applications 7.9.6.3 EBS12.1.3   To download, Partners need to request the current password to access the images.  To request the current ftp.oracle.com password and the password required to unzip the images, please email Marek Winiarski   Support Contact =  Marek Winiarski: Oracle Partner Solution Consultant

    Read the article

  • Clusterware 11gR2 &ndash; Setting up an Active/Passive failover configuration

    - by Gilles Haro
    Oracle is providing a large range of interesting solutions to ensure High Availability of the database. Dataguard, RAC or even both configurations (as recommended by Oracle for a Maximum Available Architecture - MAA) are the most frequently found and used solutions. But, when it comes to protecting a system with an Active/Passive architecture with failover capabilities, people often thinks to other expensive third party cluster systems. Oracle Clusterware technology, which comes along at no extra-cost with Oracle Database or Oracle Unbreakable Linux, is - in the knowing of most people - often linked to Oracle RAC and therefore, is seldom used to implement failover solutions. Oracle Clusterware 11gR2  (a part of Oracle 11gR2 Grid Infrastructure)  provides a comprehensive framework to setup automatic failover configurations. It is actually possible to make "failover-able'", and then to protect, almost any kind of application (from the simple xclock to the most complex Application Server). Quoting Oracle: “Oracle Clusterware is a portable cluster software that allows clustering of single servers so that they cooperate as a single system. Oracle Clusterware also provides the required infrastructure for Oracle Real Application Clusters (RAC). In addition Oracle Clusterware enables the protection of any Oracle application or any other kind of application within a cluster.” In the next couple of lines, I will try to present the different steps to achieve this goal : Have a fully operational 11gR2 database protected by automatic failover capabilities. I assume you are fluent in installing Oracle Database 11gR2, Oracle Grid Infrastructure 11gR2 on a Linux system and that ASM is not a problem for you (as I am using it as a shared storage). If not, please have a look at Oracle Documentation. As often, I made my tests using an Oracle VirtualBox environment. The scripts are tested and functional on my system. Unfortunately, there can always be a typo or a mistake. This blog entry does not replace a course around the Clusterware Framework. I just hope it will let you see how powerful it is and that it will give you the whilst to go further with it...  Note : This entry has been revised (rev.2) following comments from Philip Newlan. Prerequisite 2 Linux boxes (OELCluster01 and OELCluster02) at the same OS level. I used OEL 5 Update 5 with an Enterprise Kernel. Shared Storage (SAN). On my VirtualBox system, I used Openfiler to simulate the SAN Oracle 11gR2 Database (11.2.0.1) Oracle 11gR2 Grid Infrastructure (11.2.0.1)   Step 1 - Install the software Using asmlib, create 3 ASM disks (ASM_CRS, ASM_DTA and ASM_FRA) Install Grid Infrastructure for a cluster (OELCluster01 and OELCluster02 are the 2 nodes of the cluster) Use ASM_CRS to store Voting Disk and OCR. Use SCAN. Install Oracle Database Standalone binaries on both nodes. Use asmca to check/mount the disk groups on 2 nodes Use dbca to create and configure a database on the primary node Let's name it DB11G. Copy the pfile, password file to the second node. Create adump directoty on the second node.   Step 2 - Setup the resource to be protected After its creation with dbca, the database is automatically protected by the Oracle Restart technology available with Grid Infrastructure. Consequently, it restarts automatically (if possible) after a crash (ex: kill -9 smon). A database resource has been created for that in the Cluster Registry. We can observe this with the command : crsctl status resource that shows and ora.dba11g.db entry. Let's save the definition of this resource, for future use : mkdir -p /crs/11.2.0/HA_scripts chown oracle:oinstall /crs/11.2.0/HA_scripts crsctl status resource ora.db11g.db -p > /crs/11.2.0/HA_scripts/myResource.txt Although very interesting, Oracle Restart is not cluster aware and cannot restart the database on any other node of the cluster. So, let's remove it from the OCR definitions, we don't need it ! srvctl stop database -d DB11G srvctl remove database -d DB11G Instead of it, we need to create a new resource of a more general type : cluster_resource. Here are the steps to achieve this : Create an action script :  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh #!/bin/bash export ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 export ORACLE_SID=DB11G case $1 in 'start')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   startup EOF   RET=0   ;; 'stop')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown immediate EOF   RET=0   ;; 'clean')   $ORACLE_HOME/bin/sqlplus /nolog <<EOF   connect / as sysdba   shutdown abort    ##for i in `ps -ef | grep -i $ORACLE_SID | awk '{print $2}' ` ;do kill -9 $i; done EOF   RET=0   ;; 'check')    ok=`ps -ef | grep smon | grep $ORACLE_SID | wc -l`    if [ $ok = 0 ]; then      RET=1    else      RET=0    fi    ;; '*')      RET=0   ;; esac if [ $RET -eq 0 ]; then    exit 0 else    exit 1 fi   This script must provide, at least, methods to start, stop, clean and check the database. It is self-explaining and contains nothing special. Just be aware that it must be runnable (+x), it runs as Oracle user (because of the ACL property - see later) and needs to know about the environment. Also make sure it exists on every node of the cluster. Moreover, as of 11.2, the clean method is mandatory. It must provide the “last gasp clean up”, for example, a shutdown abort or a kill –9 of all the remaining processes. chmod +x /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh scp  /crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh   oracle@OELCluster02:/crs/11.2.0/HA_scripts Create a new resource file, based on the information we got from previous  myResource.txt . Name it myNewResource.txt. myResource.txt  is shown below. As we can see, it defines an ora.database.type resource, named ora.db11g.db. A lot of properties are related to this type of resource and do not need to be used for a cluster_resource. NAME=ora.db11g.db TYPE=ora.database.type ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_FAILURE_TEMPLATE= ACTION_SCRIPT= ACTIVE_PLACEMENT=1 AGENT_FILENAME=%CRS_HOME%/bin/oraagent%CRS_EXE_SUFFIX% AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=1 CHECK_TIMEOUT=600 CLUSTER_DATABASE=false DB_UNIQUE_NAME=DB11G DEFAULT_TEMPLATE=PROPERTY(RESOURCE_CLASS=database) PROPERTY(DB_UNIQUE_NAME= CONCAT(PARSE(%NAME%, ., 2), %USR_ORA_DOMAIN%, .)) ELEMENT(INSTANCE_NAME= %GEN_USR_ORA_INST_NAME%) DEGREE=1 DESCRIPTION=Oracle Database resource ENABLED=1 FAILOVER_DELAY=0 FAILURE_INTERVAL=60 FAILURE_THRESHOLD=1 GEN_AUDIT_FILE_DEST=/oracle/admin/DB11G/adump GEN_USR_ORA_INST_NAME= GEN_USR_ORA_INST_NAME@SERVERNAME(oelcluster01)=DB11G HOSTING_MEMBERS= INSTANCE_FAILOVER=0 LOAD=1 LOGGING_LEVEL=1 MANAGEMENT_POLICY=AUTOMATIC NLS_LANG= NOT_RESTARTING_TEMPLATE= OFFLINE_CHECK_INTERVAL=0 ORACLE_HOME=/oracle/product/11.2.0/dbhome_1 PLACEMENT=restricted PROFILE_CHANGE_TEMPLATE= RESTART_ATTEMPTS=2 ROLE=PRIMARY SCRIPT_TIMEOUT=60 SERVER_POOLS=ora.DB11G SPFILE=+DTA/DB11G/spfileDB11G.ora START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STATE_CHANGE_TEMPLATE= STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h USR_ORA_DB_NAME=DB11G USR_ORA_DOMAIN=haroland USR_ORA_ENV= USR_ORA_FLAGS= USR_ORA_INST_NAME=DB11G USR_ORA_OPEN_MODE=open USR_ORA_OPI=false USR_ORA_STOP_MODE=immediate VERSION=11.2.0.1.0 I removed database type related entries from myResource.txt and modified some other to produce the following myNewResource.txt. Notice the NAME property that should not have the ora. prefix Notice the TYPE property that is not ora.database.type but cluster_resource. Notice the definition of ACTION_SCRIPT. Notice the HOSTING_MEMBERS that enumerates the members of the cluster (as returned by the olsnodes command). NAME=DB11G.db TYPE=cluster_resource DESCRIPTION=Oracle Database resource ACL=owner:oracle:rwx,pgrp:oinstall:rwx,other::r-- ACTION_SCRIPT=/crs/11.2.0/HA_scripts/my_ActivePassive_Cluster.sh PLACEMENT=restricted ACTIVE_PLACEMENT=0 AUTO_START=restore CARDINALITY=1 CHECK_INTERVAL=10 DEGREE=1 ENABLED=1 HOSTING_MEMBERS=oelcluster01 oelcluster02 LOGGING_LEVEL=1 RESTART_ATTEMPTS=1 START_DEPENDENCIES=hard(ora.DTA.dg,ora.FRA.dg) weak(type:ora.listener.type,uniform:ora.ons,uniform:ora.eons) pullup(ora.DTA.dg,ora.FRA.dg) START_TIMEOUT=600 STOP_DEPENDENCIES=hard(intermediate:ora.asm,shutdown:ora.DTA.dg,shutdown:ora.FRA.dg) STOP_TIMEOUT=600 UPTIME_THRESHOLD=1h Register the resource. Take care of the resource type. It needs to be a cluster_resource and not a ora.database.type resource (Oracle recommendation) .   crsctl add resource DB11G.db  -type cluster_resource -file /crs/11.2.0/HA_scripts/myNewResource.txt Step 3 - Start the resource crsctl start resource DB11G.db This command launches the ACTION_SCRIPT with a start and a check parameter on the primary node of the cluster. Step 4 - Test this We will test the setup using 2 methods. crsctl relocate resource DB11G.db This command calls the ACTION_SCRIPT  (on the two nodes)  to stop the database on the active node and start it on the other node. Once done, we can revert back to the original node, but, this time we can use a more "MS$ like" method :Turn off the server on which the database is running. After short delay, you should observe that the database is relocated on node 1. Conclusion Once the software installed and the standalone database created (which is a rather common and usual task), the steps to reach the objective are quite easy : Create an executable action script on every node of the cluster. Create a resource file. Create/Register the resource with OCR using the resource file. Start the resource. This solution is a very interesting alternative to licensable third party solutions. References Clusterware 11gR2 documentation Oracle Clusterware Resource Reference Clusterware for Unbreakable Linux Using Oracle Clusterware to Protect A Single Instance Oracle Database 11gR1 (to have an idea of complexity) Oracle Clusterware on OTN   Gilles Haro Technical Expert - Core Technology, Oracle Consulting   

    Read the article

  • Lexmark X5650 doesn't print (scanning works)

    - by unor
    I want to use a Lexmark X5650 under Ubuntu. When I connect it via USB, Ubuntu recognizes the device, but can't find a driver. On the Lexmark support site, you can select "Unix/Linux" and then "Ubuntu 9.04", "9.10", "10.04" and "10.10". However, all versions lead to the same driver: lexmark-08z-series-driver-1.0-1.i386.deb.sh.tar.gz (Last updated: 2012-04-13). While installing this driver, the installer asks me to connect the device. As soon as I connect it via USB, Ubuntu now adds the printer automatically. So after the installation completed, I had 2 printers set up. But I can't print anything (I tried it with both printer configurations). Scanning works fine, though. So I guess the driver installation and the device connection are successful. When I try to print something, the print job is listed in the printing queue, but nothing happens. After some time, I get an error message which starts a debug wizard, but in the end it reads something like "Sorry, couldn't find the reason". I had several different error messages (unfortunately, I didn't record them), one was approximately like "printer cannot communicate with computer". Another said that my color ink was low (which is true, but black is full). Another said there was an input/output error. I tried it with Ubuntu 11.10. Because I read that some people had success with 10.04., I installed it in QEMU and installed the driver there, too. Same problem, though. I'd like to upgrade to 12.04, if it should work there for any reason, but I read that for some people this printer stopped working in 12.04 :/ So, it would be best if the printer would work in 12.04. If that's not possible, I'd be fine with starting a QEMU virtual machine with any GNU/Linux distribution that works with my printer.

    Read the article

  • DNS - domain conflict?

    - by Stefanos.Ioannou
    I was given two domains: domain.com & domain.info (they are on GoDaddy). And I was also given two servers, 107.105.38.99 - Rails app and 107.107.90.17 - Wordpress platform, on Digital Ocean. At first, I was instructed to associate domain.com with the 107.107.38.99 (Rails app). Then I was instructed to de-associate this IP with domain.com and associated the 107.107.90.17 with the domain name domain.com. Then I was instructed to associated domain.info with the 107.107.38.99 (Rails app). Right now, when I go to domain.com the WordPress platform (107.107.90.17) loads fine and that is what is expected. But when I go to domain.info for the Rails app (107.107.38.99) I get redirected to domain.com. This is not expected and this is really weird for me. When I ping domain.info I get this: PING domain.info (107.107.38.99): 56 data bytes 64 bytes from 107.107.38.99: icmp_seq=0 ttl=50 time=74.601 ms Which is the expected result showing the correct IP but I don't understand why I get redirected to domain.com...(which when I ping is:) domain 64 bytes from 107.107.90.17: icmp_seq=0 ttl=50 time=75.057 ms The PTR Records on Digital Ocean are as follows: IP Address PTR Record 107.107.38.99 domain.info. 107.107.90.17 domain.com. and the DNS configurations on Digital Ocean are: domain.com A: @ 107.107.90.17 CNAME: * @ domain.info A: @ 107.107.38.99 CNAME: * @ I am not sure what the issue is, if you have any clue please let me know, I will be really grateful. If you need any other info let me know.

    Read the article

  • Oracle and Microsoft Expand Choice and Flexibility in Deploying Oracle Software in the Cloud

    - by Gene Eun
    Oracle and Microsoft have entered into a new partnership that will help customers embrace cloud computing by providing greater choice and flexibility in how to deploy Oracle software.  Here are the key elements of the partnership: Effective today, our customers can run supported Oracle software on Windows Server Hyper-V and in Windows Azure Effective today, Oracle provides license mobility for customers who want to run Oracle software on Windows Azure Microsoft will add Infrastructure Services instances with popular configurations of Oracle software including Java, Oracle Database and Oracle WebLogic Server to the Windows Azure image gallery Microsoft will offer fully licensed and supported Java in Windows Azure Oracle will offer Oracle Linux, with a variety of Oracle software, as preconfigured instances on Windows Azure Oracle’s strategy and commitment is to support multiple platforms, and Microsoft Windows has long been an important supported platform.  Oracle is now extending that support to Windows Server Hyper-V and Window Azure by providing certification and support for Oracle applications, middleware, database, Java and Oracle Linux on Windows Server Hyper-V and Windows Azure. As of today, customers can deploy Oracle software on Microsoft private clouds and Windows Azure, as well as Oracle private and public clouds and other supported cloud environments. For information related to software licensing in Windows Azure, see Licensing Oracle Software in the Cloud Computing Environment. Also, Oracle Support policies as they apply to Oracle software running in Windows Azure or on Windows Server Hyper-V are covered in two My Oracle Support (MOS) notes which are shown below: MOS Note 1563794.1 Certified Software on Microsoft Windows Server 2012 Hyper-V - NEW MOS Note 417770.1 Oracle Linux Support Policies for Virtualization and Emulation - UPDATED

    Read the article

  • The Hot-Add Memory Hogs

    - by Andrew Clarke
    One of the more difficult tasks, when virtualizing a server, is to determine the amount of memory that Hypervisor should assign to the virtual machine. This requires accurate monitoring and, because of the consequences of setting the value too low, there is a great temptation to err on the side of over-provisioning. This results in fewer guest VMs and, in fact, with more accurate memory provisioning, many virtual environments could support 30% more VMs. In order to achieve a better consolidation (aka VM density) ratio, Windows Server 2008 R2 SP1 has introduced what Microsoft calls ‘Dynamic Memory’. This means that the start-up RAM VM memory assigned to guest virtual machines can be allowed to vary according to demand, changing dynamically while the VM is running, based on the workload of applications running inside. If demand outstrips supply, then memory can be rationed according to the ‘memory weight’ assigned to the guest VM. By this mechanism, memory becomes a shared resource that can be reallocated automatically as demand patterns vary. Unlike VMWare’s Memory Overcommit technology, the sum of all the memory allocations to each virtual machine will not exceed the total memory of the host computer. This is fine for applications that are self-regulating in their demands for memory, releasing memory back into the 'pool' when not under peak load. Other applications however, such as SQL Server Standard and Enterprise, are by nature, memory hogs under high workload; they can grab hot-add memory whilst running under load and then never release it. This requires more careful setting-up and the SQLOS team have provided some guidelines from for configuring SQL Server in virtual environments. Whereas VMWare’s Memory Overcommit is well-proven in a number of different configurations, Hyper-V’s ‘Dynamic Memory’ is new. So far, the indications are that it will improve the business case for virtualizing and it is probably a far more intuitive technology for the average IT professional to grasp. It is certainly worth testing to see whether it works for you.

    Read the article

  • Consolidating Oracle E-Business Suite R12 on Oracle's SPARC SuperCluster

    - by Giri Mandalika
    Oracle Optimized Solution for Oracle E-Business Suite (EBS) R12 12.1.3 is now available on oracle.com. The Oracle Optimized Solution for Oracle E-Business Suite This solution uses the SPARC SuperCluster T4-4, Oracle’s first multi-purpose engineered system.  Download the free business and technical white papers which provide significant relevant information and resources.  What is an Optimized Solution? Oracle Optimized Solutions are fully documented architectures that have been thoroughly tested, tuned and optimized for performance and availability across the entire stack on a target platform. The technical white paper details the deployed application architecture along with various observations from installing the application on target platform to its behavior and performance in highly available and scalable configurations. Oracle E-Business Suite R12 and Oracle Database 11g Multiple Oracle E-Business Suite  application modules were tested in this Oracle Optimized Solution -- Financials (online - Oracle Forms & Web requests), Order Management (online - Oracle Forms & Web requests) and HRMS (online - Web requests & payroll batch). Oracle Solaris Cluster and Oracle Real Application Cluster deliver the the high availability on this solution.  To understand the behavior of the architecture under peak load conditions, determine optimum utilization, verify the scalability of the solution and exercise high availability features, Oracle engineers tested the Oracle E-Business Suite and Oracle Database all running on a SPARC SuperCluster T4-4 engineered system. The test results are documented in the Oracle Optimized Solution white papers to provide general guidance for real world deployments.  Questions & Requests For more information, visit Oracle Optimized Solution for Oracle E-Business Suite page. If you are at a point where you would like to actually test a specific Oracle E-Business Suite application module on SPARC T4 systems or an engineered system such as SPARC SuperCluster, please contact Oracle Solution Center.

    Read the article

  • Firefox clones for Ubuntu

    - by cipricus
    In Windows I use, beside the main Firefox installation, one or even two "Firefox clones" for different purposes (specifically oriented addons and configurations, light configuration without addons, configuration for a different user, etc). A clone of Firefox is a browser that is identical to Firefox except the name. (It may have more - but not less - features than FF and it must be installable beside Firefox, not on top/instead of it. So, a clone is not a replacement/exclusive alternative of FF: in the way Swiftfox is, taking all previous Firefox extensions and configuration.) For example, in Windows, Pale Moon, Cometbird and Wyzo are FF clones (but they do not have Linux support). Basically, Flock browser would also qualify, and it had support for Linux: but it was discontinued. What remains as closest to being a full clone is Seamonkey, has support for Linux, but it is not a complete clone (although it can use a lot of FF extensions): themes are not working, the interface is in general different and rather primitive. It has the merit of keeping the pace with FF 4+ (in contrast with Swiftweasel, for example.) Are such more browsers available in Ubuntu? (As for comments asking why I "really" need these clones, I am just used to doing that, I like two separate Firefox-like browsers: why pleasure, just like curiosity, would not be enough??)

    Read the article

  • Using XML as data storage

    - by Kian Mayne
    I was thinking about the XML format and the following quote: “XML is not a database. It was never meant to be a database. It is never going to be a database. Relational databases are proven technology with more than 20 years of implementation experience. They are solid, stable, useful products. They are not going away. XML is a very useful technology for moving data between different databases or between databases and other programs. However, it is not itself a database. Don't use it like one.“ -Effective XML: 50 Specific Ways to Improve Your XML by Elliotte Rusty Harold (page 230, Part 4, Item 41, 2nd paragraph) This seems to really stress that XML should not be used for data storage and should only be used for program to program interoperability. Personally, I disagree and .NET's app.config file that's used to store a program's settings is an example of data storage in an XML file. However for databases rather than configurations etc XML should not be used. To develop my point, I will use two examples: A) Data about customers with fields that are all on one level i.e. there are a number of fields all relating to one customer with no children B) Data about configuration of an application where nested fields and properties make a lot of sense So my question is, Is this still a valid statement and is it now acceptable to store data using XML? EDIT: I've sent an email to the author of that quote to ask for his input/extra context.

    Read the article

  • Fonts look bad in Microsoft Office using Wine

    - by amfcosta
    Office fonts in wine look very different from what they look in Windows or LibreOffice. As can be seen from the attached screenshots, they look blurry in some sizes and aliased in other sizes. You can see the differences not only in the document text but also in the ribbon menu. It happens with a lot of fonts. I'm testing it with Office 2010 now, but it also happens in Office 2007. Things I've tried: Changing fontsmooth settings with winetricks - made no difference. Copying fonts from a Windows system - made no difference. Using Ubuntu's fonts (by removing the Windows/Fonts from the wineprefix) - removed the blurriness in some fonts but increased aliasing. The three screenshots correspond to different "configurations": office_wine.png - Office Word in Wine using Wine's original fonts; office_nowinefonts.png - Office Word in Wine using Ubuntu's fonts; office_windows.png - Office Word in Windows. PS: please make sure to see the screenshots without scaling them to notice the problem. EDIT: A screenshot of how Calibri behaves in Wine here.

    Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >