Search Results

Search found 890 results on 36 pages for 'lynx eyes'.

Page 27/36 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• How to restore Active Desktop if Themes is locked via GPO?

  - by pepoluan

  My company forces Active Desktop upon everybody so that it can display a (monthly-rotated) corporate wallpaper.jpg. Problem is, some computers (including my laptop) somehow experienced some errors resulting in the dreaded "Active Desktop Recovery" screen to show up... and clicking the "Restore My Active Desktop" button always resulted in "Internet Explorer Script Error". Various workarounds I found in the Internet either does not work or requires me to change the theme first to something else... and the latter I can't do because the Desktop Settings screen is locked via GPO. As it happens, due to the nature of the programs I use, I'm granted Administrator-level access on my computer. The question is: How do I fix my situation? Note: I don't need to put on my own wallpaper, but watching the "Active Desktop Recovery" screen (with its BLANK WHITE!!1! OH MY EYES!1!!one!eleven!! background) gets tiresome. I'm quite happy with the corporate wallpaper. I just need to somehow 'recover' my Active Desktop. More information: OS: Windows XP Professional SP3 (yeah, company's too afraid to even experiment with Windows 7) Antivirus: Symantec Endpoint Protection If you need any additional information, feel free to ask.

  Read the article

• Allow connections to only a specific URL via HTTPS with iptables, -m recent (potentially) and -m string (definitely)

  - by The Consumer

  Hello, Let's say that, for example, I want to allow connections only to subdomain.mydomain.com; I have it partially working, but it sometimes gets in a freaky loop with the client key exchange once the Client Hello is allowed. Ah, to make it even more annoying, it's a self-signed certificate, and the page requires authentication, and HTTPS is listening on a non-standard port... So the TCP/SSL Handshake experience will differ greatly for many users. Is -m recent the right route? Is there a more graceful method to allow the complete TCP stream once the string is seen? Here's what I have so far: #iptables -N SSL #iptables -A INPUT -i eth0 -p tcp -j SSL #iptables -A SSL -m recent --set -p tcp --syn --dport 400 #iptables -A SSL -m recent --update -p tcp --tcp-flags PSH,SYN,ACK SYN,ACK --sport 400 #iptables -A SSL -m recent --update -p tcp --tcp-flags PSH,SYN,ACK ACK --dport 400 #iptables -A SSL -m recent --remove -p tcp --tcp-flags PSH,ACK PSH,ACK --dport 400 -m string --algo kmp --string "subdomain.mydomain.com" -j ACCEPT Yes, I have tried to get around this with nginx tweaks, but I can't get nginx to return a 444 or abrupt disconnect before the client hello, if you can think of a way to achieve this instead, I'm all ears, err, eyes. (As suggested by a user, bringing this inquiry over from http://stackoverflow.com/questions/4628157/allow-connections-to-only-a-specific-url-via-https-with-iptables-m-recent-pote)

  Read the article

• Did Adobe Photoshop just killed my Graphics Card for good?

  - by user6004

  I was working with Adobe Photoshop, just some regular work, when I came to edit a PSD file and change the text of some layer, when all of a sudden the PC froze. No mouse, screen is frozen, keyboard strokes aren't getting me anything, no Task Manager, nada. So I rebooted my PC, and then something quite terrifying appeared before my eyes. It was not the Checkdisk utility that was launched, that made me terrified (by the way, that reboot damaged the partition table of an external HDD that was connected at the time to my PC, but that's another story). It was the screen itself. Please have a look. So after Checkdisk finished and Windows loaded, I noticed that the resolution was not right. Instead of 1440x900 which I had set, it was 1280x1024. When I went to change it back, I had no option to change back to my old resolution, and has only 3 other general resolution properties, as if my Video Card (GeForce 8800 GTS btw) was not recognized. And what do you know, in the Device Manager it appeared with an exclamation mark. Inside the hardware, it said this: Windows has stopped this device because it has reported problems. (Code 43) Uninstalling the drivers, downloading the newest drivers from NVIDIA and installing them did not work. It always comes back to this. So, do you have any advice before I go out and buy a new graphics card? I thought this was the only option left, but maybe the experts at Super User can help me out. By the way, the dotted screen appears after every reboot, and I see the dots when the ASUS Motherboard screen shows up at boot. Thanks in advance.

  Read the article

• How to change font size on display

  - by Tim

  My laptop is Lenovo T400, whose screen size is 14.1 inches and default resolution is 1440 x 900. My main OS is Ubuntu 10.10. The default font size on the display is somehow small, which might contribute to the fatigue of my eyes. My previous laptop is Acer 5000, whose screen size is 15.4 inches and the default resolution is 1024 x 768. I like reading on my old laptop better than on my new one. Is it possible to change the setting of my new one to look like reading my old one? What are the parameters that control the font size? Are screen size, resolution part of them? In Windows, there are choices for font size, while in Ubuntu I haven't find out where I can change the setting and would like know if someone here knows about it. I also wonder if I can use a separate bigger display (perhaps just like a desktop display) as the display of my laptop, in case I don't want to enlarge font size at the cost of sacrificing the amount of the content to display, and how I shall do it? Thanks and regards!

  Read the article

• RedStation.com is heaven for ddos attackers, How to file complaint?

  - by Ehsan

  Sorry, I don't know where to open this subject. This is not the first time we have faced with a massive DDOS attack from one of servers in RedStation.com and even after we had contacted with their abuse department with it's log there is no cooperation and they don't even like to bother themselves about it. and we don't know how to stop such activity. Do you know how to file complaint against this datacenter? we could not be patient anymore and see they are not care about such things on their network ? it seems like they are heaven for attackers now since they close their eyes to gain more money. I guess some global organization is missing in this matter to investigate such activity and make sure providers are responsible for their services. Here is some of it's log: 2686M 75G DROP all -- * * 31.3-RedStation 0.0.0.0/0 rt: 16167 0.002007 31.3-RedStation -> my-server-ip UDP Source port: 36391 Destination port: 16167 0.002011 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002014 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002018 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002021 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002025 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination port: 12081 0.002033 31.3-RedStation -> my-server-ip UDP Source port: 36391 Destination port: 16167 0.002037 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002040 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002044 31.3-RedStation -> my-server-ip UDP Source port: 38367 Destination port: 16312 0.002047 31.3-RedStation -> my-server-ip UDP Source port: 39585 Destination Any response would be appreciated

  Read the article

• VirtualBox 3.2 is released! A Red Letter Day?

  - by Fat Bloke

  Big news today! A new release of VirtualBox packed full of innovation and improvements. Over the next few weeks we'll take a closer look at some of these new features in a lot more depth, but today we'll whet your appetite with the headline descriptions. To start with, we should point out that this is the first Oracle-branded version which makes today a real Red-letter day ;-)  Oracle VM VirtualBox 3.2 Version 3.2 moves VirtualBox forward in 3 main areas ( handily, all beginning with "P" ) : performance, power and supported guest operating system platforms.  Let's take a look: Performance New Latest Intel hardware support - Harnessing the latest in chip-level support for virtualization, VirtualBox 3.2 supports new Intel Core i5 and i7 processor and Intel Xeon processor 5600 Series support for Unrestricted Guest Execution bringing faster boot times for everything from Windows to Solaris guests; New Large Page support - Reducing the size and overhead of key system resources, Large Page support delivers increased performance by enabling faster lookups and shorter table creation times. New In-hypervisor Networking - Significant optimization of the networking subsystem has reduced context switching between guests and host, increasing network throughput by up to 25%. New New Storage I/O subsystem - VirtualBox 3.2 offers a completely re-worked virtual disk subsystem which utilizes asynchronous I/O to achieve high-performance whilst maintaining high data integrity; New Remote Video Acceleration - The unique built-in VirtualBox Remote Display Protocol (VRDP), which is primarily used in virtual desktop infrastructure deployments, has been enhanced to deliver video acceleration. This delivers a rich user experience coupled with reduced computational expense, which is vital when servers are running hundreds of virtual machines; Power New Page Fusion - Traditional Page Sharing techniques have suffered from long and expensive cache construction as pages are scrutinized as candidates for de-duplication. Taking a smarter approach, VirtualBox Page Fusion uses intelligence in the guest virtual machine to determine much more rapidly and accurately those pages which can be eliminated thereby increasing the capacity or vm density of the system; New Memory Ballooning- Ballooning provides another method to increase vm density by allowing the memory of one guest to be recouped and made available to others; New Multiple Virtual Monitors - VirtualBox 3.2 now supports multi-headed virtual machines with up to 8 virtual monitors attached to a guest. Each virtual monitor can be a host window, or be mapped to the hosts physical monitors; New Hot-plug CPU's - Modern operating systems such Windows Server 2008 x64 Data Center Edition or the latest Linux server platforms allow CPUs to be dynamically inserted into a system to provide incremental computing power while the system is running. Version 3.2 introduces support for Hot-plug vCPUs, allowing VirtualBox virtual machines to be given more power, with zero-downtime of the guest; New Virtual SAS Controller - VirtualBox 3.2 now offers a virtual SAS controller, enabling it to run the most demanding of high-end guests; New Online Snapshot Merging - Snapshots are powerful but can eat up disk space and need to be pruned from time to time. Historically, machines have needed to be turned off to delete or merge snapshots but with VirtualBox 3.2 this operation can be done whilst the machines are running. This allows sophisticated system management with minimal interruption of operations; New OVF Enhancements - VirtualBox has supported the OVF standard for virtual machine portability for some time. Now with 3.2, VirtualBox specific configuration data is also stored in the standard allowing richer virtual machine definitions without compromising portability; New Guest Automation - The Guest Automation APIs allow host-based logic to drive operations in the guest; Platforms New USB Keyboard and Mouse - Support more guests that require USB input devices; New Oracle Enterprise Linux 5.5 - Support for the latest version of Oracle's flagship Linux platform; New Ubuntu 10.04 ("Lucid Lynx") - Support for both the desktop and server version of the popular Ubuntu Linux distribution; And as a man once said, "just one more thing" ... New Mac OS X (experimental) - On Apple hardware only, support for creating virtual machines run Mac OS X. All in all this is a pretty powerful release packed full of innovation and speedups. So what are you waiting for?  -FB 

  Read the article

• nginx with passenger

  - by Luc

  Hello, I'm trying to move from Apache + Passenger to Nginx + passenger on my Ubuntu Lucid Lynx box. When I install passenger, sudo gem install passenger and cd /var/lib/gems/1.9.1/gems/passenger-2.2.14/bin sudo ./passenger-install-nginx-module everything is fine (no error). Nginx is downloaded / compiled and installed at the same time (when selecting the first option during passenger installation). By default it is installed in /opt/nginx. I end up with the configuration file /opt/nginx/conf/nginx.conf (this conf file was automatically updated with passenger config). The thing I do not understand is that I also have the configuration file /etc/nginx/nginx.conf... what is the purpose of this one when it seems that the conf file in /opt/... is the main one ? When I run /etc/init.d/nginx start, it starts correclty saying that /etc/nginx/nginx.conf is ok... Does it mean that it does not check the other conf file ? I have updated /etc/init.d/nginx script and add /opt/nginx/sbin at the beginning of the PATH and it seems the correct conf file is taken into account. It seems like I have 2 nginx installations where I only relied on passenger to install it... Thanks a lot for your help, I am kind of lost here :) Luc

  Read the article

• tomcat wont start up on linux machine

  - by David

  hi, im new to linux but after spending the day i have got linux running. installed java and tomcat. my goal is host my app with this linux box i've just set up. i know it all works fine from my windows based machine but it is my laptop so i'm planning this as my dedicated server. following many many forums i've now got tomcat 7 installed. however i cannot get it to start. changing to the tomcat directory and "./startup.sh" i get output Using CATALINA_BASE: /usr/local/tomcat Using CATALINA_HOME: /usr/local.tomcat Using CATALINA_TMPDIR: /usr/local/tomcat/temp Using JRE_HOME: usr/lib/jvm/java-6-sun/ Using CLASSPATH: /usr/local/tomcat/bin/bootstrap.jar:/usr/local.tomcat/bin/c\tomcat-juli.jar thats the end of theoutput. however localhost:8080 is not up. and in the tomcat log file is the error "eval: 1: usr/lib/jvm/java-6-sun//bin/java: not found" hopfully there is some expert here who can help me with this problem. please note that im a novice when it comes to linux. thankyou oh and my version of linux is Ubuntu 10.04 LTS - the Lucid Lynx

  Read the article

• Cannot install passenger with Nginx

  - by Luc

  Hello, I have a rack application that I want to migrate from Ruby 1.8.7 + Apache + passenger to Ruby 1.9.1 + Nginx + passenger. I have made up the following script for a quick install all in one, and it raises an error... Here is the installation script: (basic one with all the steps I need to install everything on a Ubuntu 10.04 Lucid Lynx fresh box) Nginx sources cd /tmp wget http://nginx.org/download/nginx-0.7.66.tar.gz tar xzf nginx-0.7.66.tar.gz cd nginx-0.7.66 openssl required for SSL/TLS sudo apt-get install openssl sudo apt-get install libssl-dev Compilation stuff sudo apt-get zlib1g-dev Ruby interpreter 1.9.1 sudo apt-get install ruby1.9.1 ruby1.9.1-dev rubygems1.9.1 irb1.9.1 ri1.9.1 rdoc1.9.1 build-essential nginx libopenssl-ruby1.9.1 Make sure default ruby uses version 1.9.1 sudo update-alternatives --install /usr/bin/ruby ruby /usr/bin/ruby1.9.1 400 --slave /usr/share/man/man1/ruby.1.gz ruby.1.gz /usr/share/man/man1/ruby1.9.1.1.gz --slave /usr/bin/ri ri /usr/bin/ri1.9.1 --slave /usr/bin/irb irb /usr/bin/irb1.9.1 --slave /usr/bin/rdoc rdoc /usr/bin/rdoc1.9.1 sudo update-alternatives --config ruby Passenger (rake-0.8.7, fastthread-1.0.7, rack-1.1.0, passenger-2.2.14) sudo gem install passenger Activate Passenger in nginx, select option 2 to use nginx sources donwloaded above cd /var/lib/gems/1.9.1/gems/passenger-2.2.14/bin sudo ./passenger-install-nginx-module And this is the error message I got: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/ContentHandler.c gcc -c -pipe -O -W -Wall -Wpointer-arith -Wno-unused-parameter -Wunused-function -Wunused-variable -Wunused-value -Werror -g -I src/core -I src/event -I src/event/modules -I src/os/unix -I /tmp/pcre-8.00 -I objs -I src/http -I src/http/modules -I src/mail \ -o objs/addon/nginx/StaticContentHandler.o \ /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c: In function ‘passenger_static_content_handler’: /var/lib/gems/1.9.1/gems/passenger-2.2.14/ext/nginx/StaticContentHandler.c:71: error: ‘ngx_http_request_t’ has no member named ‘zero_in_uri’ make[1]: *** [objs/addon/nginx/StaticContentHandler.o] Error 1 make[1]: Leaving directory `/tmp/nginx-0.7.66' make: *** [build] Error 2 -------------------------------------------- It looks like something went wrong Please read our Users guide for troubleshooting tips: /var/lib/gems/1.9.1/gems/passenger-2.2.14/doc/Users guide Nginx.html I do not understand the reason of this error. Is this a compatibility problem ? Hope you have any clues :) Thanks a lot, Luc

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Optimal setup for ASUS P6X58D Premium BIOS (no OC)?

  - by rumtscho

  Normally, I'd trust the mainboard manufacturer to choose the best options as defaults. But I had trouble with the board, because even with Quick Boot enabled, it booted twice as slowly as a Pentium 4 Celeron. Then I changed lots of options at once (most of them weren't explained in the manual, just mentioned with a single sentence) and the boot time is only marginally worse than the Pentium 4 (54 sec against 46 sec from button to pw entering screen). Now I don't know if I have turned something off which should have stayed on. I guess I even won't be able to boot from a CD now, because even though it is present in the boot sequence, I took off a timeout I think it needs to check whether there is a disk in the drive. The second reason is that I don't have an internal HDD, only a SSD. I forgot my sources blush but I am under the impression that today's BIOS and OS options are geared toward booting from a HDD, which is often less than optimal when one boots from a SSD, especially when there are functions which cause avoidable writing cycles, as a SSD wears out after too many writing cycles. Most of the things I've read concern the OS, but there are some BIOS-relevant options too. I am especially confused about the disk mode. The board supports AHCI, IDE-simulation and RAID, but of the different articles I've read, there is a proponent for each and no clear arguments for any. So can one tell me which options are important in general and which are important for a SSD-only system? I don't want to overclock the CPU, so you don't have to say anything about this (yes I know the board is meant for OC:)). I am thinking of overclocking the RAM, since they sold me 1600er heatsinked modules which are running at 1066 now, but I'm not sure yet about that. The rest of the system: i7-930, Intel X25-m G2, 6 GB RAM, GTS 250, some no-name Blue-ray ROM. 2 external HDDs over USB 2.0. Lots of other USB-connected hardware (12 devices I think), no SATA 3 drives (will disabling the controller have an impact on performance?), no LAN, only WiFi. Lucid Lynx 64 bit, no dual boot, no virtual installations. The main uses of the system are: managing and playing/showing all the media stored on the external disks, lots of image manipulation, some video editing, a bit of (non-demanding) gaming, rarely development. Lots of Internet surfing too, but this shouldn't have much impact on performance.

  Read the article

• Trouble using gitweb with nginx

  - by Rayne

  I have a git repository in a directory inside of /home/raynes/pubgit/. I'm trying to use gitweb to provide a web interface to it. I use nginx as my web server for everything else, so I don't really want to have to use another just for this. I'm mostly following this guide: http://michalbugno.pl/en/blog/gitweb-nginx, which is the only guide I can find via google and is really recent. fcgiwrap apparently isn't in Lucid Lynx's repositories, so I installed it manually. I spawn instances via spawn-fcgi: spawn-fcgi -f /usr/local/sbin/fcgiwrap -a 127.0.0.1 -p 9001 That's all good. My /etc/gitweb.conf is as follows: # path to git projects (<project>.git) #$projectroot = "/home/raynes/pubgit"; $my_uri = "http://mc.raynes.me"; $home_link = "http://mc.raynes.me/"; # directory to use for temp files $git_temp = "/tmp"; # target of the home link on top of all pages #$home_link = $my_uri || "/"; # html text to include at home page $home_text = "indextext.html"; # file with project list; by default, simply scan the projectroot dir. $projects_list = $projectroot; # stylesheet to use $stylesheet = "/gitweb/gitweb.css"; # logo to use $logo = "/gitweb/git-logo.png"; # the 'favicon' $favicon = "/gitweb/git-favicon.png"; And my nginx server configuration is this: server { listen 80; server_name mc.raynes.me; location / { root /usr/share/gitweb; if (!-f $request_filename) { fastcgi_pass 127.0.0.1:9001; } fastcgi_index index.cgi; fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; include fastcgi_params; } } The only difference here is that I've set fastcgi_pass to 127.0.0.1:9001. When I go to http://mc.raynes.me I'm greeted with a page that simply says "403" and nothing else. I have not the slightest clue what I did wrong. Any ideas?

  Read the article

• Ubuntu Lucid: Erratic screen behaviour after boot

  - by fgysin

  In short: about 50% of the time I have a screwed up monitor setup after reboot. About 50% it is totally correct. Now the longer version: I updated my machine from 9.04 to 10.04 (via 9.10). At first I run into some monitor problems (I have a 3-monitor setup) because of the known bug in the new xserver driver for xinerama. This messes up behaviour if the mouse goes either left or above the screen number 0, i.e. I had to make my left-most monitor screen 0. Everything worked out fine finally, I got my 3-monitor setup back with xinerama enabled to get one big desktop streched over 3 screens. Now the fun part: Every time I start up my machine only one of the 3 monitors gets a signal and is woken up: it only recognizes the left-most monitor (screen 0) and crams all the desktop stuff into this one screen. If I go into nvidia settings I only see one physical device although all 3 are connected and have power. When I look into the xorg.conf I can still see my old setup with 3 devices, 3 screens, xinerama active etc... But I was totally unable to get 3 montitors to work. (I tried unplugging monitors, reconfiguring whole nvidia setup, ...) But it gets even better: When I restart my machine (i.e. choose the restart option from the Ubuntu menu) it shuts down and tries to restart. The restart then gets stuck after showing the Ubuntu splash screen with the 'loading bar' (the moving dots thingy) and I am forced to kill the machine by cutting power. But after the power cut the machine boots up normally and suddenly I get my 3 monitor setup back up working. That is until the next time I shut down and start up, where it all starts over again and I only have one monitor... (see above) I really have a hard time seeing where the error is. It must be that the restart boot somehow differs from the 'normal' boot. But the fact that it gets stuck and I need to cut power which then basically triggers a 'normal' boot does not really support this theory... My setup (please tell me if you need further info): 3 monitors as 3 screens as one desktop (with xinerama) 2 nvidia cards where screen 0 and 1 are on card 0 and screen 2 is on card 1 Ubuntu 10.04 Lucid Lynx (updated from 9.10, 9.04, ....) I would appreciate every idea on the subject, at the moment I really don't have any clue what to do...

  Read the article

• Linux bonded Interfaces hanging periodically

  - by David

  I've several hosts that are showing problems with connectivity. When working from the command line, for example, typing is frozen for a second or so, then recovers - then it does it again. The most egregious example host would freeze (input) for 15-30 seconds, then recover and go out 5 seconds later. Switching cables didn't do anything - but removing one of the physical cables caused everything to clear up instantly (which why I think this is a network problem). Looking at the network I couldn't see any packets floating that would explain this. These ethernet interfaces (Gigabit Dell) were working normally previously, but since we moved the systems - and put them on a new set of switches - this has been a problem on multiple theoretically identically-configured hosts. The original switches were an HP Procurve 1810-24G and an HP Procurve 1800-24G connected with LLDP; the new switches are both Cisco SG 200-26, which I understand are rebranded Linksys switches. Is this caused by a problem with the switches? Is it the switch configurations? Are the Cisco switches incapable of handling this? I don't see where the configuration is located; I searched the usual /etc/sysconfig/network/devices but there's nothing in there about options (like mii polling) and nothing about the method of balancing the two. Searching scripts, I can't find anything in /etc/init.d/network either. The hosts are almost all Red Hat Enterprise Linux 5.x systems (5.6, 5.7) but some are Ubuntu Server 10.04.3 Lucid Lynx. I need help with both if it comes to that. UPDATE: We're also seeing some problems with servers on the original switches. The HP switches and the Cisco switches are also interconnected (temporarily); there is a cable run from one switch to the next. Pings on any of these hosts show about one ICMP packet out of every 5-6 getting dropped (timed out). Could there be an interaction between the two switches? Oh, and the hosts are using bonding with Balance-RR as the method.

  Read the article

• Fix single entry from mbr

  - by Sander

  I use EasyBCD to manage my tripleboot of (1) Windows Server 2008 R2, (2) Windows 7 Professional and (3) Ubuntu Linux. While trying to change the order of my boot menu I ended up losing the Windows Server entry. Luckily I had a boot menu backup (.bcd file) that allowed me to restore my boot menu using EasyBCD. However, when I now select the Windows Server option in my boot menu the Windows Server Recovery Environment starts up. So I have to select language/keyboard layout/etc. and then I have 3 options as shown in the image below. . My goal is to fix the one corrupted Windows Server entry from my boot menu without messing up or losing the two other ones. I'm guessing the Recovery Console (Command Prompt) is the next step and that I will be needing bootrec.exe. But when consulting this page: Use the Bootrec.exe tool in the Windows Recovery Environment to troubleshoot and repair startup issues in Windows (about half way down there's a link that shows the bootrec.exe options) I'm getting uncertain. The page lists 4 options for bootrec.exe : /FixMbr /FixBoot /ScanOs /RebuildBcd What option do I need to fix just the server entry of my boot menu? Thanks in advance, Sander P.S. All three OS's are on the same physical disk (3 different partitions). Disk layout: System reserved (primary partition, 100 MB) Windows 7 (primary parition, 150 GB) Windows Server 2008 (primary partition, 150 GB) Extended partition (linux partitions (/,/swap,/home), 150GB + data partition, 150 GB) P.P.S. This is what my boot menu looks like using EasyBCD (Detailed/Debug mode) on my Windows 7 installation. Windows Boot Manager -------------------- identifier {9dea862c-5cdd-4e70-acc1-f32b344d4795} device partition=\Device\HarddiskVolume1 description Windows Boot Manager locale en-US inherit {7ea2e1ac-2e61-4728-aaa3-896d9d0a9f0e} default {93f90e43-cae8-11df-b05a-c9177e705936} resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} displayorder {93f90e43-cae8-11df-b05a-c9177e705936} {93f90e3f-cae8-11df-b05a-c9177e705936} {93f90e46-cae8-11df-b05a-c9177e705936} toolsdisplayorder {b2721d73-1db4-4c62-bf78-c548a880142d} timeout 10 displaybootmenu Yes Windows Boot Loader ------------------- identifier {93f90e43-cae8-11df-b05a-c9177e705936} device partition=\Device\HarddiskVolume3 path \Windows\system32\winload.exe description Windows Server 2008 R2 - Standard locale en-US inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e44-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=\Device\HarddiskVolume3 systemroot \Windows resumeobject {93f90e42-cae8-11df-b05a-c9177e705936} nx OptOut Windows Boot Loader ------------------- identifier {93f90e3f-cae8-11df-b05a-c9177e705936} device partition=C: path \Windows\system32\winload.exe description Windows 7 - Professional locale nl-NL inherit {6efb52bf-1766-41db-a6b3-0ee5eff72bd7} recoverysequence {93f90e40-cae8-11df-b05a-c9177e705936} recoveryenabled Yes osdevice partition=C: systemroot \Windows resumeobject {93f90e3e-cae8-11df-b05a-c9177e705936} nx OptIn Real-mode Boot Sector --------------------- identifier {93f90e46-cae8-11df-b05a-c9177e705936} device partition=C: path \NST\AutoNeoGrub0.mbr description Ubuntu 10.04 - Lucid Lynx

  Read the article

• Hidden Features of C#?

  - by Serhat Özgel

  This came to my mind after I learned the following from this question: where T : struct We, C# developers, all know the basics of C#. I mean declarations, conditionals, loops, operators, etc. Some of us even mastered the stuff like Generics, anonymous types, lambdas, linq, ... But what are the most hidden features or tricks of C# that even C# fans, addicts, experts barely know? Here are the revealed features so far: Keywords yield by Michael Stum var by Michael Stum using() statement by kokos readonly by kokos as by Mike Stone as / is by Ed Swangren as / is (improved) by Rocketpants default by deathofrats global:: by pzycoman using() blocks by AlexCuse volatile by Jakub Šturc extern alias by Jakub Šturc Attributes DefaultValueAttribute by Michael Stum ObsoleteAttribute by DannySmurf DebuggerDisplayAttribute by Stu DebuggerBrowsable and DebuggerStepThrough by bdukes ThreadStaticAttribute by marxidad FlagsAttribute by Martin Clarke ConditionalAttribute by AndrewBurns Syntax ?? operator by kokos number flaggings by Nick Berardi where T:new by Lars Mæhlum implicit generics by Keith one-parameter lambdas by Keith auto properties by Keith namespace aliases by Keith verbatim string literals with @ by Patrick enum values by lfoust @variablenames by marxidad event operators by marxidad format string brackets by Portman property accessor accessibility modifiers by xanadont ternary operator (?:) by JasonS checked and unchecked operators by Binoj Antony implicit and explicit operators by Flory Language Features Nullable types by Brad Barker Currying by Brian Leahy anonymous types by Keith __makeref __reftype __refvalue by Judah Himango object initializers by lomaxx format strings by David in Dakota Extension Methods by marxidad partial methods by Jon Erickson preprocessor directives by John Asbeck DEBUG pre-processor directive by Robert Durgin operator overloading by SefBkn type inferrence by chakrit boolean operators taken to next level by Rob Gough pass value-type variable as interface without boxing by Roman Boiko programmatically determine declared variable type by Roman Boiko Static Constructors by Chris Easier-on-the-eyes / condensed ORM-mapping using LINQ by roosteronacid Visual Studio Features select block of text in editor by Himadri snippets by DannySmurf Framework TransactionScope by KiwiBastard DependantTransaction by KiwiBastard Nullable<T> by IainMH Mutex by Diago System.IO.Path by ageektrapped WeakReference by Juan Manuel Methods and Properties String.IsNullOrEmpty() method by KiwiBastard List.ForEach() method by KiwiBastard BeginInvoke(), EndInvoke() methods by Will Dean Nullable<T>.HasValue and Nullable<T>.Value properties by Rismo GetValueOrDefault method by John Sheehan Tips & Tricks nice method for event handlers by Andreas H.R. Nilsson uppercase comparisons by John access anonymous types without reflection by dp a quick way to lazily instantiate collection properties by Will JavaScript-like anonymous inline-functions by roosteronacid Other netmodules by kokos LINQBridge by Duncan Smart Parallel Extensions by Joel Coehoorn

  Read the article

• Applying Test Driven Development to a tightly coupled architecture

  - by Chris D

  Hi all, I've recently been studying TDD, attended a conference and have dabbled in few tests and already I'm 100% sold, I absolutely love it TDD. As a result I've raised this with my seniors and they are prepared to give it a chance, so they have tasked me with coming up with a way to implement TDD in the development of our enterprise product. The problem is our system has evolved since the days of VB6 to .NET and implements alot of legacy technology and some far from best practice development techniques i.e. alot of business logic in the ASP.NET code behind and client script. The largest problem however is how our classes are tightly coupled with database access; properties, methods, constructors - usually has some database access in some form or another. We use an in-house data access code generator tool that creates sqlDataAdapters that gives us all the database access we could ever want, which helps us develop extremely quickly, however, classes in our business layer are very tightly coupled to this data layer - we aren't even close to implementing some form of repository design. This and the issues above have created me all sorts of problems. I have tried to develop some unit tests for some existing classes I've already written but the tests take ALOT longer to run since db access is required, not to mention since we use the MS Enterprise Caching framework I am forced to fake a httpcontext for my tests to run successfully which isn't practical. Also, I can't see how to use TDD to drive the design of any new classes I write since they have to be soo tightly coupled to the database ... help! Because of the architecture of the system it appears I can't implement TDD without some real hack which in my eyes just defeats the aim of TDD and the huge benefits that come with. Does anyone have any suggestions how I could implement TDD with the constraints I'm bound too? or do I need to push the repository design pattern down my seniors throats and tell them we either change our architecture/development methodology or forget about TDD altogether? :) Thanks

  Read the article

• What's the best way to refresh a UITableView within a UINavigationController hierarchy

  - by Steve Neal

  Hi, I'm pretty new to iPhone development and have struggled to find what I consider to be a neat way around this problem. I have a user interface where a summary of record data is displayed in a table inside a navigation controller. When the user clicks the accessory button for a row, a new view is pushed onto the navigation controller revealing a view where the user can edit the data in the corresponding record. Once done, the editing view is popped from the navigation controller's stack and the user is returned to the table view. My problem is that when the user returns to the table view, the table still shows the state of the data before the record was edited. I must therefore reload the table data to show the changes. It doesn't seem possible to reload the table data before it is displayed as the call only updates displayed records. Reloading it after the table has been displayed results in the old data changing before the user's eyes, which I'm not too happy with. This seems to me like a pretty normal thing to want to do in an iPhone app. Can anyone please suggest the best practice approach to doing this? I feel like I'm missing something. Cheers - Steve.

  Read the article

• Android app resets on orientation change, best way to handle?

  - by Anthony Westover

  So I am making a basic chess app to play around with some various elements of android programming and so far I am learning a lot, but this time I am lost. When the orientation of the emulator changes the activity gets reset. Based on my research the same thing will happen anytime the application is paused/interrupted, ie. keyboard change, phone call, hitting the home key etc. Obviously, it is not viable to have a chess game constantly reset, so once again I find myself needing to learn how to fix this problem. My research brings up a few main things, overriding the onPaused method in my Activity, listening for Orientation, Keyboard changes in my manifest (via android:configChanges), using Parcelables, or Serialization. I have looked up a lot of sample code using Pacelables, but to be honest it is too confusing. Maybe coming back tomorrow with fresh eyes will be beneficial, but right now the more I look at Parcelables the less sense it makes. My application utilizes a Board object, which has 64 Cell Objects(in an 8x8 2D array), and each cell has a Piece Object, either an actual piece or null if the space is empty. Assuming that I use either Parcelable or Serialization I am assuming that I would have to Parcelize or Serialize each class, Board, Cell, and Piece. First and foremost, is Parcelable or Serialization even the right thing to be looking at for this problem? If so is either Parcelable or Serializable preferred for this? And am I correct in assuming that each of the three objects would have to be Parceled/Serialized? Finally, does anybody have a link to a simple to understand Parcelable tutorial? Anything to help me understand, and stop further headaches down the road when my application expands even further. Any help would be appreciated.

  Read the article

• Where are the factory_girl records?

  - by gmile

  I'm trying to perform an integration test via Watir and RSpec. So, I created a test file within /integration and wrote a test, which adds a test user into a base via factory_girl. The problem is — I can't actually perform a login with my test user. The test I wrote looks as following: ... before(:each) @user = Factory(:user) @browser = FireWatir::Firefox.new end it "should login" @browser.text_field(:id, "username").set(@user.username) @browser.text_field(:id, "password").set(@user.password) @browser.button(:id, "get_in").click end ... As I'm starting the test and see a "performance" in browser, it always fires up a Username is not valid error. I've started an investigation, and did a small trick. First of all I've started to have doubts if the factory actually creates the user in DB. So after the immediate call to factory I've put some puts User.find stuff only to discover that the user is actually in DB. Ok, but as user still couldn't have logged in I've decided to see if he's present in DB with my own eyes. I've added a sleep right after a factory call, and went to see what's in the DB at the moment. I was crushed to see that the user is actually missing there! How come? Still, when I'm trying to output a user within the code, he is actually being fetched from somewhere. So where does the records, made by factory_girl within a runtime lie? Is it test or dev DB? I don't get it. I've 10 times checked if I'm running my Mongrel in test mode (does it matter? I think it does, as I'm trying to tun an integration test) and if my database.yml holds the correct connection specific data. I'm using an authlogic, if that can give any clue (no, putting activate_authlogic doesn't work here).

  Read the article

• SQLite table does not exist exception for existing SQLite database (and table)

  - by SK9

  I've followed the instructions given here for introducing an existing SQLite database to your Android app. When I query the table "android_metadata" this is fine. But when I run a similar query on my own table "words" (which has _id for primary integer key) I get a table does not exist exception and the app crashes. Why is that? Code: Cursor c = myDatabase.query("android_metadata", null, null, null, null, null, null, null); works but Cursor c = myDatabase.query("words", null, null, null, null, null, null, null); returns a table does not exist exception. This is how I'm creating the database (the references to paths and filenames are correct): private void copyDatabase() throws IOException{ //Open local db as the input stream InputStream myInput = mContext.getAssets().open(DB_NAME); //Path to the just created empty db String outFileName = DB_PATH + DB_NAME; //Open the empty db as the output stream OutputStream myOutput = new FileOutputStream(outFileName); //Transfer bytes from the inputfile to the outputfile byte[] buffer = new byte[1024]; int length; while ((length = myInput.read(buffer))>0){ myOutput.write(buffer, 0, length); } //Close the streams myOutput.flush(); myOutput.close(); myInput.close(); } (Note: To my eyes, the table is there. I'm looking right at it in my SQLite browser.)

  Read the article

• How can I debug why this click handler never fires?

  - by tixrus

  I am going to be excrutiatingly detailed here. I am using Firefox 3.6.3 on Max OSX with Firebug 1.5.3. I have two versions of a project, one which works and one with a bug. One I downloaded and one I typed by hand. Take a guess which one doesn't work. They should be the same except that mine uses a newer version of jQuery and the files are named differently. jQuery version is not the issue. I made mine use the older jquery and I made the working one use the newer jquery. Either way, mine still broke and the downloaded one still works. I've busted my eyes trying to see how these projects are different. The only thing I don't want to do is copy the working code to the busted code because I need to be able to figure this stuff out when it is my own unique code causing similar issues. There are no errors that I can see in Firebug in my code, in fact, 2/3 of it works just fine. just the second button does nothing. So I wanted to step through. These are always eyeball errors and I really suck at seeing them. I put it on a public server. http://colleenweb.com/jqtests/ex71.html And I want to debug ex71.js If you firebug the working one and set a break point at line 13 in ex71.js the variable json has the expected values when you click on the second button. But If you firebug this one, it never gets there. I've been over the html and all the names of everything seem to match up. I also wonder why the buttons aren't right justified but that's a css thing. Please tell me what I'm missing, and more importantly, what tool/technique I could use to find these types of bugs.

  Read the article

• Nested dereferencing arrows in Perl: to omit or not to omit?

  - by DVK

  In Perl, when you have a nested data structure, it is permissible to omit de-referencing arrows to 2d and more level of nesting. In other words, the following two syntaxes are identical: my $hash_ref = { 1 => [ 11, 12, 13 ], 3 => [31, 32] }; my $elem1 = $hash_ref->{1}->[1]; my $elem2 = $hash_ref->{1}[1]; # exactly the same as above Now, my question is, is there a good reason to choose one style over the other? It seems to be a popular bone of stylistic contention (Just on SO, I accidentally bumped into this and this in the space of 5 minutes). So far, none of the usual suspects says anything definitive: perldoc merely says "you are free to omit the pointer dereferencing arrow". Conway's "Perl Best Practices" says "whenever possible, dereference with arrows", but it appears to only apply to the context of dereferencing the main reference, not optional arrows on 2d level of nested data structures. "MAstering Perl for Bioinfirmatics" author James Tisdall doesn't give very solid preference either: "The sharp-witted reader may have noticed that we seem to be omitting arrow operators between array subscripts. (After all, these are anonymous arrays of anonymous arrays of anonymous arrays, etc., so shouldn't they be written [$array-[$i]-[$j]-[$k]?) Perl allows this; only the arrow operator between the variable name and the first array subscript is required. It make things easier on the eyes and helps avoid carpal tunnel syndrome. On the other hand, you may prefer to keep the dereferencing arrows in place, to make it clear you are dealing with references. Your choice." Personally, i'm on the side of "always put arrows in, since itg's more readable and obvious tiy're dealing with a reference".

  Read the article

• Java AtomicInteger: what are the differences between compareAndSet and weakCompareAndSet?

  - by WizardOfOdds

  (note that this question is not about CAS, it's about the "May fail spuriously" Javadoc). The only difference in the Javadoc between these two methods from the AtomicInteger class is that the weakCompareAndSet contains the comment: "May fail spuriously". Now unless my eyes are cheated by some spell, both method do look to be doing exactly the same: public final boolean compareAndSet(int expect, int update) { return unsafe.compareAndSwapInt(this, valueOffset, expect, update); } /* ... * May fail spuriously. */ public final boolean weakCompareAndSet(int expect, int update) { return unsafe.compareAndSwapInt(this, valueOffset, expect, update); } So I realize that "May" doesn't mean "Must" but then why don't we all start adding this to our codebase: public void doIt() { a(); } /** * May fail spuriously */ public void weakDoIt() { a(); } I'm really confused with that weakCompareAndSet() that appears to do the same as the compareAndSet() yet that "may fail spuriously" while the other can't. Apparently the "weak" and the "spurious fail" are in a way related to "happens-before" ordering but I'm still very confused by these two AtomicInteger (and AtomicLong etc.) methods: because apparently they call exactly the same unsafe.compareAndSwapInt method. I'm particularly confused in that AtomicInteger got introduced in Java 1.5, so after the Java Memory Model change (so it is obviously not something that could "fail spuriously in 1.4" but whose behavior changed to "shall not fail spuriously in 1.5").

  Read the article

• Regex: Use start of line/end of line signs (^ or $) in different context

  - by fgysin

  While doing some small regex task I came upon this problem. I have a string that is a list of tags that looks e.g like this: foo,bar,qux,garp,wobble,thud What I needed to do was to check if a certain tag, e.g. 'garp' was in this list. (What it finally matches is not really important, just if there is a match or not.) My first and a bit stupid try at this was to use the following regex: [^,]garp[,$] My idea was that before 'garp' there should either be the start of the line/string or a comma, after 'garp' there should be either a comma or the end of the line/string. Now, it is instantly obvious that this regex is wrong: Both ^ and $ change their behaviour in the context of the character class [ ]. What I finally came up with is the following: ^garp$|^garp,|,garp,|,garp$ This regex just handles the 4 cases one by one. (Tag at beginning of list, in the center, at the end, or as the only element of the list.) The last regex is somehow a bit ugly in my eyes and just for funs sake I'd like to make it a bit more elegant. Is there a way how the start of line/end of line characters (^ and $) can be used in the context of character classes?

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >