Search Results

Search found 9765 results on 391 pages for 'skill building'.

Page 27/391 | < Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >

• Power supply switch like stays off motherboard light turns on

  - by Sion

  I bought a computer at the thrift store yesterday. The computer powered on without any error beeps. Getting it back to the house determined that the CD and hard drive needed to be changed. Put in a populated hard drive to check, the computer turned on and seemed to function. Put in a new CD drive, and just put in a new Hard drive. I plugged it in to check and I noticed that the light for the power supply switch did not come on. But I did notice that the light on the motherboard is lit. and I could not turn the computer on. To help troubleshoot it I unplugged the CD and Hard drive. then re-plugged the power supply and switched it on and off. Nothing changed. Parts: Motherboard: Digital Home PSW DH deluxe Power Supply: FSP-Group FX700-GLN Did I accidentally unplug something while installing the hard drive? Is the Power supply fried somehow?

  Read the article

• Hard drive not detected after installing the Operating System

  - by Eka Anggraini

  After I failed to install SUSE Linux 10.0, I want to go back to the windows operating system again. but when I want to install windows, my hard drive is not detected, whereas in the BIOS in the detection / known. I was dizzy, his mistake about it. Where is. I was looking for, my problem is named after the Blue Screen of Death (BSOD) that is an error message from windows to prevent further damage, but with various types of error messages, one of them as I have *** STOP: 0X0000007B (0XF896A524, 0XC0000034, 0X00000000, 0X00000000) I do not know, where the system is broken. but why hard drive is not known ... at the time of going to re-install?

  Read the article

• Suggestions for someone wanting to become a Laptop Reseller

  - by Josh B.

  First of all, to give you a little background... I have had my Microsoft A+ for several years now. I used to run a small business repairing Xbox 360 consoles and I am currently a Network Engineer for a company in Ohio. I definitely know my way around a computer. I miss running a small business on the side and I'd like to get something going again. There is a really high demand in my area for Laptops and I was thinking about starting a small Laptop store out of my house. What is the best way to do this? I was assuming that the best way would be to buy barebones systems and build them yourself. If this is the best method, I would be very interested in any resources to get parts and such. Apparently Laptop parts aren't the easiest thing to come by (especially at a good price). Does anyone have any suggestions about how to get something like this going?

  Read the article

• Could I replace a stock PSU fan with a more quiet one?

  - by GaryJL

  I have a cheap 450W PSU with an exhaust fan at the rear. This fan, however, is very loud. Is it a good idea to replace the stock PSU fan with a quiet fan with similar airflow? The PSU fan is hard-wired to the PCB in the PSU so I was intending on snipping the stock fan wires and sealing the loose ends with electrical tape. I would then connect the new quiet fan to the PWR_FAN socket on the motherboard. Has anyone done this before themselves? Is it a good idea in the first place? Considering if my PSU fails, it could take out a couple of other components too.

  Read the article

• Weird RAM Upgrade Experience

  - by Axel Isouard

  I have a laptop, HP EliteBook 8540p having originally 4GB RAM and I've recently bought Corsair Value Select SO-DIMM 16 Go (2x 8 Go) DDR3 1333 MHz. It fits the required RAM specifications perfectly, and once I've inserted them, the BIOS recognizes the memory correctly, but my linux Gentoo running on kernel 3.1.6 SMP x86_64 crashes immediately when I'm running an app which consumes a lot of memory. The laptop crashes as if there's no more battery left, when the memory reaches at least 6000MB ram. Windows 7 doesn't want to run anymore, it shows a blue screen with the IRQ LESS OR EQUAL error if I set 8GB, and it doesn't boot at all if I set 16GB. Is there something I could do to fix this please ?

  Read the article

• explanation of RAM specs, and what do I need for a Gaming rig

  - by ewok

  I am looking into upgrading my custom built PC's RAM. I use the machine mostly for gaming, but I don't really know a ton about RAM, so I wanted to ask a few questions. The research I've done tells me there is a negligible increase in speed for anything above 1600 MHz. is this true or is it worth the extra money to go higher? Other than drawing more power from the PSU, is there any real difference in performance with different voltages (1.5V vs 1.65V)? most of the kits I've found in the 2x4 1600 range have a CAS latency of 9 and timing of 9-9-9-24. For a significant increase in price (usually about 1.5x), I can get either 8 or 7 and lower timing. Is it worth the cost? What I am looking for here is someone to give a good explanation of what the different specs represent, and how that relates to the performance of the machine. Specifically, I'm looking for what specs I need to focus on for a good gaming rig. I am NOT looking for a "buy this, it's the best RAM" without an explanation of why. The information will be much more valuable as it will allow me to make my own informed decision. As they say, give a man a fish, he'll eat for a day. teach a man to fish, and he'll eat for the rest of his life.

  Read the article

• How to install Windows with no CD drive boot option in BIOS?

  - by Kris Hollenbeck

  I have a new computer which I built from scratch and I am trying to install a copy of Windows Vista on it. I am able to get to the BIOS and change the boot options which are as follows.. -Built-in EFI Shell -SATA: ST31000528AS I have searched around for and everything I find says to boot from the CD rom. However, as you can see. That is not an option for me. So I am wondering if there is another way around this? Is it possible to boot the Disk from the EFI Shell? Any help is much appreciated. Thanks EDIT: I have tried this.. http://technet.microsoft.com/en-us/library/dd744321%28v=ws.10%29.aspx UPDATE: I managed to make my USB bootable via the BIOS and I have copied my windows Vista disk onto my USB via drag and drop. However I am still not able to get the windows install to start. Also I have tried booting it from the EFI shell using the following command.. blk6: blk6:\> \EFI\BOOT\BOOTX64.EFI Still no luck..

  Read the article

• Updating ATI HD 5970 Graphics card - version errors?

  - by user55406

  I'm having an issue...My system specs is: Intel i7 960 6GM Corair XMS RAM ATI HD5970 graphics card Intel dx58so motherboard Cooler Master HAF 922 case 1.5TB Seagate hard drive Windows Vista x86 (32-bit). Here is my issue: when I go to AMD/ATI website to update my graphics card - it doesn't. when I type DxDiag and then click on display it tell me my version is 8.17.0 and its on 10.10.0 for the latest version. How can I get 8.17.0 too 10.10.0? I figure it would have done that after I updated the driver for my graphics card. Thanks.

  Read the article

• Server Hardware on the Desktop

  - by jcnnghm

  When I rebuild my desktop, I'm thinking of using server hardware instead of desktop hardware. I want to do this so I can easily add a lot of ECC memory (~20GB), and possibly more than one processor. I know that video hardware could be a problem, especially because I use 4 monitors. I should be fine with this, as long as I have two pci-e channels. Are there any downsides to doing this? Anything I'm not seeing?

  Read the article

• Choosing parts for a high-spec custom PC - feedback required [closed]

  - by James

  I'm looking to build a high-spec PC costing under ~£800 (bearing in mind I can get the CPU half price). This is my first time doing this so I have plenty of questions! I have been doing lots of research and this is what I have come up with: http://pcpartpicker.com/uk/p/j4lE Usage: I will be using it for Adobe CS6, rendering in 3DS Max, particle simulations in Realflow and for playing games like GTA IV (and V when it comes out), Crysis 1/2, Saints Row The Third, Deus Ex HR, etc. Questions: Can you see any obvious problem areas with the current setup? Will it be sufficient for the above usage? I won't be doing any overclocking initially. Is it worth buying the H60 liquid cooler, or will the fan that comes with the CPU be sufficient? Is water cooling generally quieter? Is the chosen motherboard good for the current components? And is it future-proof? I read that the HDD is often the bottleneck when it comes to gaming. I presume this is true to other high-end applications? If so, is my selection good? I keep changing my mind about the GPU; first the 560, now the 660. Can anyone shed some light on how to choose? I read mixed opinions about matching the GPU to the CPU. Will the 560 or the 660 be sufficient for my required usage? Atm I'm basing my choice on the PassMark benchmarks and how much they cost. The specs on the GeForce website state that the 560 and the 660 both require 450W. Is this a good figure to base the wattage of my PSU on? If so, how do you decide? Do I really need 750W? The latest GTX 690 requires 650W. Is it a good idea to buy a 750W PSU now to future-proof myself?

  Read the article

• Slot load DVD burner options for standard desktop case

  - by Michael Kohne

  I need a new DVD burner (internal) for my father-in-law's computer. He's apparently broken the current one - he forgot to push the tray back in after doing something and hit it with his chair. Given this, I'd like to get him a slot-loading DVD burner, so as to avoid the problem entirely. I need an internal device, and I'll be mounting in a 5 1/4" bay. He doesn't need any super-spec device - as long as it can read/write all the standard formats, it's good. I see a few options at newegg.com, but they all have mixed reviews. Are there any out there that are generally seen as reliable? How does one go about mounting slimline devices in a standard 5 1/4" bay? Is there a standard faceplate kit for that?

  Read the article

• Is there any way to shut up my ATI HD 5770?

  - by slpsys

  So to preface, I basically built Jeff's machine; I already had some of the components, including (scarily enough) the exact same case1. I've been buying bits and pieces over the past few months, which coincided perfectly with his recent post about three monitors, though not being a gamer outright, I opted for the second-from-the-bottom option. After finally plopping all the pieces lovingly into the case this evening, I turn it on...and it sounds like four professional grade hair-driers. Some quick regression analysis determined that with the video card out, the running machine sounded no louder than our house's vents. Basically, my last desktop build included a $45-at-the-time graphics card, and it's been Macbook Pros and workstations since then, so I have zero idea whether I'll just be able to tune the fan speed later on. Will I be able to get this thing to quiet down every time I'm not playing Modern Warfare 2 at maximum framerate, or should I just send this thing back now, and get the quietest card in my pricerange? 1 One thing of note is that I do not have noise-absorbing foam in the case, as is pictured in the article. I'm only mentioning that because I suspect it could drop the overall output a few decibels, but obviously not that many.

  Read the article

• Computer turns on and off very quickly, then nothing, then works?

  - by hellohellosharp

  The strange nature of this problem is what is stumping me. I built my computer about 7 months ago using all new parts off of Newegg (not a kit or anything). One day, I wake up and turn on my computer. I press the power button and it turns on, but then back off after half a second. I press the power button again, this time nothing. I continue pressing the power button while at the same time turning the power supply on and off (to try and reset things). The power button still does nothing. But then, after about 5 minutes, WALLAH, it works just fine like nothing was ever wrong. It goes for an entire week working just fine. Then, one morning, the entire process starts again. I press the power button and it comes on and then right back off. I press the power button several times and nothing happens, and then it works again after a couple minutes of trying. What is going on with my computer?

  Read the article

• Bay Speaker Panel Installation

  - by JordanD

  I purchased a bay speaker panel that has a molex connector and a sound connector. Do I need to run the sound connector through my tower and somehow out the back into the IO panel? Or is there supposed to be a place on my motherboard for it to connect to? This is a replacement for normal desktop speakers for me to save desk space. Edit: Is there an adapter for the sound cable to the mother board? If so; what is it called? Thanks

  Read the article

• Is there anything essential to check before powering on a self-built PC for the first time?

  - by Nick F

  I've just put together a computer for the first time. I've found plenty of info online that covered the construction, but now I'm ready - I think - to power it up I'm wondering if there are any checks that I can do to be sure that the machine is safe and ready to turn on. What are the things (if any) that I absolutely must make sure of before turning on? Just to be clear, I'm sure there are many things I could get wrong that would mean the computer won't work properly, but only a few that might cause serious damage. It's really the latter I'm asking for.

  Read the article

• Where can I connect this USB 3.0 cord?

  - by tomsawyer95

  My motherboard has 2 USB 3.o slots in the back, where the usual slots go, but the tower also supports 1 or 2 USB 3.0 ports in the front, above the DVD drive. So, there is a cord coming out of those ports that has an end exactly like the one in the attached picture. I am not able to find a matching port on the mobo, so I presume it doesn't have one, and I would need an adapter or else just leave it inoperable. I have an ASUS P8Z68-V LX and an Antec 900 tower.

  Read the article

• Subnetting design for a new building?

  - by Zombie

  A building with 4 floors, each floor is divided as follows; 15 users for accounting, 15 users for finance and 15 users for marketing (i.e 45 user in each floor). Data center is located on the ground floor, with 45 servers to be divided into 15 for all the accounting users in the four floors, another 15 for the finance and the last 15 for the marketing. (i.e each 15 server for each one of the above categories are separated from the other 15 and so on) What is the proper subnetting design for such scenario? Knowing that we are allowed to use anything we want!

  Read the article

• Best ways to move a server room and 80 desktops to a new building

  - by Marko

  Need to plan the best way to physically move a server room (12 IBM x3400 towers) and all associated networking equipment to a new building. Everything is going, comms (80 strong call centre operation), desktops(80-90) the whole lot and has to be done efficiently over a weekend. What I cant seem to find are the best ways to move equipment, i.e is it best to remove hard drives and pack them separetely, do I pack the chassis' with foam and/or surround them in bubble wrap? Are there specific products designed to move computer equipment and where would I find these. The internet has failed me so far, please help

  Read the article

• Creating a new PC, need suggestions on parts [closed]

  - by zilentworld

  I want to build a new PC and went around PC Stores to ask for quotations with only some parts that i want and the rest are filled up by them. Here is the "best" i got Core i5 3550 4gb ram ddr3 (planning to get 8,no brand yet) 500gb hdd (no brand yet) GTX550Ti 1g DDR5 Asus P8H61 ATX Casing Here is what i have from my last PC: Huntkey green power 500w Hyper TX3 Evo I want a dual monitor pc which will be used mostly for gaming,programming and i do a lot of multitasking. Im not planning YET to OC my cpu but i will in the near future. So can i ask for suggestions on what to change on my list? my budget is about 800$ (including 2nd monitor)

  Read the article

• Building a Student Storage server

  - by DobotJr

  I work for a school district. I've been put in charge of building a storage server for students. A place for them to work off of from school and home. My challenge is getting this to work from home. At school they login, authenticate, and they get a mapped drive to their folder on the server (S:\fileserver\studentname). My question is how can I make this available to students at home? The server is running Windows Server 2003 R1. I've got PHP, Apache, and MySQL working together. My idea is to write a script that will "crawl" through the directory containing all of the student folders, then create an instance of every file and folder in a MySQL DB. Create a login page that will use LDAP for authentication, and once they login to the server from home, they get a page with folders a files tied to their username. Has anyone out there ever put something like this together??

  Read the article

• ID Badge Access System for Building with Active Directory Integration [closed]

  - by Alex

  I hope this is the right place for this question. So, we're looking into setting up a building access that uses badges or cards of some kind. I wanted to ask the users on here if they've had to do such setups and/or if they have recommendations? Is there maybe a system that integrates with Active Directory? I know one of the things our managers want to do is to be able to run reports on when people are entering the buildings. I'd appreciate any suggestions and thanks in advance!

  Read the article

• Build pc with 6 dvi outputs?

  - by pie154

  I am trying to build a pc with 6 dvi outputs, I have already built a machine that does this using a radeon hd 4850x2 graphics card, but unfortunately it seems that this is unvailable to buy from anywhere in the uk currently. has this card maybe been discontinued? As i can't source this card I was wondering if there is another graphics card available that will give 4 dvi ouputs so as I can get the total of 6 needed usin g another normal 2 port card? Thnaks

  Read the article

• Getting syntax errors when building with python 3.1 and not with python 2.6

  - by mathan

  Hi All, Using Mac os X 10.6, python 3.1 and gcc 4.0 trying to build pyfsevent implemented in python2.6 by converting it to python 3.1. Wondering when getting the following errors while building in python 3.1 alone. Why not when building with python 2.6? error: syntax error before ‘CFFileDescriptorRef’ warning: no semicolon at end of struct or union error: syntax error before ‘}’ token warning: data definition has no type or storage clas

  Read the article

• Any book on building a complete web service?

  - by webservicesbuilder

  Hi All, Is there any book that can guide me building secure webservices. Adding xsds to WSDL Adding WS security policies to WSDL Any book that can describe how to put together a secure web service. the language shouldn't matter, but it should explain the concepts and help the reader to put together all the pieces required for building a secure web service. Thanks

  Read the article

• mysql query building output taking a long time

  - by user121196

  I have a simple query that does select * from t limit 1; on a remote mysql server. I use squirrel(mysql client) to run it, it shows: Query 1 of 1 elapsed time (seconds) - Total: 22.047, SQL query: 1.047, Building output: 21 why does building output take such a long time? what does this process do? when running from mysql command line, the whole process takes 0.3 secs (also remotely)

  Read the article

< Previous Page | 23 24 25 26 27 28 29 30 31 32 33 34  | Next Page >