Search Results

Search found 12061 results on 483 pages for 'non printable'.

Page 270/483 | < Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >

• So my employer wants me to do less programming and focus on IT support

  - by Rich

  I was hired into a non tech company's IT department as a programmer a few years back, and after several rounds of lay offs, we're down to a skeleton crew. I've saved the company hundreds of thousands of dollars with my projects and management has been happy with them (although most of the stakeholders have since left the company). Management now wants me to limit the programming that I do and spend most of my time on IT support: putting out fires, dealing with vendors, outsourced contractors, supporting company systems, managing projects, etc. I am a little burnt out on programming since I've been pushed pretty hard for the past several years. However, I'm not sure if this is a good career move in the long run. I'm a decent programmer (and also good with databases) but not obsessed with it to the point of coding outside of work. I'm approaching my mid 30s and there's potential ageism to deal with down the line. While I'm fortunate to have survived the lay offs, it sorta feels like my job is being "dumbed down". I have both good technical skills and people skills...but it doesn't take a genius to do what I'm doing now. And my success is being increasingly linked to others' performance rather than my own... Just looking for some advice. Is it time to move on? That's not really an easy thing to do since I'd likely have to move to another area to find another comparable tech job. Should I go after another pure technical role? Or should I stay and try to make this work? People say do what you "enjoy" but it doesn't really matter to me as long as I'm getting paid. Also the ageism thing is on the horizon and could be an issue eventually. I'm making a decent (but not great) salary. Should I chase money and maximize my income while I still have a chance? Or be happy with a moderate salary and 40 hour work week?

  Read the article

• XSLT and possible alternatives [on hold]

  - by wirrbel

  I had a look at XSLT for transforming one XML file into another one (HTML, etc.). Now while I see that there are benefits to XSLT (being a standardized and used tool) I am reluctant for a couple of reasons XSLT processors seem to be quite huge / resource hungry XML is a bad notation for programming and thats what XSLT is all about. It do not want to troll XSLT here though I just want to point out what I dislike about it to give you an idea of what I would expect from an alternative. Having some Lisp background I wonder whether there are better ways for tree-structure transformations based upon some lisp. I have seen references to DSSSL, sadly most links about DSSSL are dead so its already challenging to see some code that illustrates it. Is DSSSL still in use? I remember that I had installed openjade once when checking out docbook stuff. Jeff Atwood's blog post seems to hint upon using Ruby instead of XSLT. Are there any sane ways to do XML transformations similar to XSLT in a non-xml programming language? I would be open for input on Useful libraries for scripting languages that facilitate XML transformations especially (but not exclusively) lisp-like transformation languages, or Ruby, etc. A few things I found so far: A couple of places on the web have pointed out Linq as a possible alternative. Quite generally I any kind of classifications, also from those who have had the best XSLT experience. For scheme http://cs.brown.edu/~sk/Publications/Papers/Published/kk-sxslt/ and http://www.okmij.org/ftp/Scheme/xml.html

  Read the article

• How to make the members of my Data Access Layer object aware of their siblings

  - by Graham

  My team currently has a project with a data access object composed like so: public abstract class DataProvider { public CustomerRepository CustomerRepo { get; private set; } public InvoiceRepository InvoiceRepo { get; private set; } public InventoryRepository InventoryRepo { get; private set; } // couple more like the above } We have non-abstract classes that inherit from DataProvider, and the type of "CustomerRepo" that gets instantiated is controlled by that child class. public class FloridaDataProvider { public FloridaDataProvider() { CustomerRepo = new FloridaCustomerRepo(); // derived from base CustomerRepository InvoiceRepo = new InvoiceRespository(); InventoryRepo = new InventoryRepository(); } } Our problem is that some of the methods inside a given repo really would benefit from having access to the other repo's. Like, a method inside InventoryRepository needs to get to Customer data to do some determinations, so I need to pass in a reference to a CustomerRepository object. Whats the best way for these "sibling" repos to be aware of each other and have the ability to call each other's methods as-needed? Virtually all the other repos would benefit from having the CustomerRepo, for example, because it is where names/phones/etc are selected from, and these data elements need to be added to the various objects that are returned out of the other repos. I can't just new-up a plain "CustomerRepository" object inside a method within a different repo, because it might not be the base CustomerRepository that actually needs to run.

  Read the article

• JVM Language Summit in July

  - by Tori Wieldt

  A reminder that the 2012 JVM Language Summit is happening July 30–August 1, 2012 in Santa Clara, CA. The JVM Language Summit is an open technical collaboration among language designers, compiler writers, tool builders, runtime engineers, and VM architects, sharing their experiences as creators of programming languages for the JVM, and of the JVM itself. Non-JVM developers are welcome to attend or speak on their runtime, VM, or language of choice. About 70 language and VM implementers attended last year—and over one third presented. What’s at the JVM Language Summit? Three days of technical presentations and conversations about programming languages and the JVM. Prepared talks by numerous visiting language experts, OpenJDK engineers, and other Java luminaries. Many opportunities to visit and network with your peers. Da Vinci Machine Project memorabilia. Dinner at a local restaurant, such as last year’s Faultline Brewing Company. A chance to help shape the future of programming languages on the JVM. Space is limited: This summit is organized around a single classroom-style room, to support direct communication between participants. To cover costs, there is a nominal conference fee of $100. Learn more.

  Read the article

• Game crash/Screen freeze recovery (without shell or reboot)

  - by Asavar Tzeth

  I am an old Windows PC gamer, now converted into Ubuntu (Linux) lover. I am even going so far as to attempt to replace all my games in a Windows dual-boot with Wine and it is going well. However... Even if Linux is less prone to crashing, games, especially the windows ones (but also a few native) can crash. My problem is when this is in full screen and the computer becomes non-responsive. In Windows you can solve this with ctrl+alt+delete, but Ubuntu lacks this feature and my only choice is a reboot. Is there any Ubuntu version of this feature? Of course excepting the ctrl+alt+F1, find and kill process method. It is fine if you know how to do it, but too slow and difficult for the typical gamer. I believe strongly in Ubuntu as the future gaming platform in one form or another. If this feature does not exist, then the Ubuntu team should address this as fast as possible, since it is critical for all old Windows gamers. Thank you for your time. Asavar Tzeth (Alias)

  Read the article

• Quantifying the Value Derived from Your PeopleSoft Implementation

  - by Mark Rosenberg

  As product strategists, we often receive the question, "What's the value of implementing your PeopleSoft software?" Prospective customers and existing customers alike are compelled to justify the cost of new tools, business process changes, and the business impact associated with adopting the new tools. In response to this question, we have been working with many of our customers and implementation partners during the past year to obtain metrics that demonstrate the value obtained from an investment in PeopleSoft applications. The great news is that as a result of our quest to identify value achieved, many of our customers began to monitor their businesses differently and more aggressively than in the past, and a number of them informed us that they have some great achievements to share. For this month, I'll start by pointing out that we have collaborated with one of our implementation partners, Huron Consulting Group, Inc., to articulate the levers for extracting value from implementing the PeopleSoft Grants solution. Typically, education and research institutions, healthcare organizations, and non-profit organizations are the types of enterprises that seek to facilitate and automate research administration business processes with the PeopleSoft Grants solution. If you are interested in understanding the ways in which you can look for value from an implementation, please consider registering for the webcast scheduled for Friday, December 14th at 1pm Central Time in which you'll get to see and hear from our team, Huron Consulting, and one of our leading customers. In the months ahead, we'll plan to post more information about the value customers have measured and reported to us from their implementations and upgrades. If you have a great story about return on investment and want to share it, please contact either [email protected]  or [email protected]. We'd love to hear from you.

  Read the article

• How can state changes be batched while adhering to opaque-front-to-back/alpha-blended-back-to-front?

  - by Sion Sheevok

  This is a question I've never been able to find the answer to. Batching objects with similar states is a major performance gain when rendering many objects. However, I've been learned various rules when drawing objects in the game world. Draw all opaque objects, front-to-back. Draw all alpha-blended objects, back-to-front. Some of the major parameters to batch by, as I understand it, are textures, vertex buffers, and index buffers. It seems that, as long as you are adhering to the above two rules, there's little to be done in regards to batching. I see one possibility to batch, while still adhering to the above two rules. Opaque objects can still be drawn out of depth-order, because drawing them front-to-back is merely a fillrate optimization, meanwhile state changes may very well be far more expensive than the overdraw of drawing out of depth-order. However, non-opaque objects, those that require alpha-blending at least, must be drawn back-to-front in order to avoid rendering artifacts. Is the loss of the fillrate optimization for opaques worth the state batching optimization?

  Read the article

• How can I make smoother upwards/downwards controls in pygame?

  - by Zolani13

  This is a loop I use to interpret key events in a python game. # Event Loop for event in pygame.event.get(): if event.type == QUIT: pygame.quit() sys.exit() if event.type == pygame.KEYDOWN: if event.key == pygame.K_a: my_speed = -10; if event.key == pygame.K_d: my_speed = 10; if event.type == pygame.KEYUP: if event.key == pygame.K_a: my_speed = 0; if event.key == pygame.K_d: my_speed = 0; The 'A' key represents up, while the 'D' key represents down. I use this loop within a larger drawing loop, that moves the sprite using this: Paddle1.rect.y += my_speed; I'm just making a simple pong game (as my first real code/non-gamemaker game) but there's a problem between moving upwards <= downwards. Essentially, if I hold a button upwards (or downwards), and then press downwards (or upwards), now holding both buttons, the direction will change, which is a good thing. But if I then release the upward button, then the sprite will stop. It won't continue in the direction of my second input. This kind of key pressing is actually common with WASD users, when changing directions quickly. Few people remember to let go of the first button before pressing the second. But my program doesn't accommodate the habit. I think I understand the reason, which is that when I let go of my first key, the KEYUP event still triggers, setting the speed to 0. I need to make sure that if a key is released, it only sets the speed to 0 if another key isn't being pressed. But the interpreter will only go through one event at a time, I think, so I can't check if a key has been pressed if it's only interpreting the commands for a released key. This is my dilemma. I want set the key controls so that a player doesn't have to press one button at a time to move upwards <= downwards, making it smoother. How can I do that?

  Read the article

• Multiplayer approach for tablets on wi-fi (FPS/TPS)? Server authority, etc

  - by Fraggle

  Looking for some guidance or what has worked well for others in implementing a multiplayer FPS/TPS type game on tablets (probably just 2-6 players at a time). The main issue being that tablets/phones are typically "less" connected than say a console or pc might be. And therefore, my thought is that to have complete Server authority of everything is not going to work. But maybe I'm off base on that. So I guess I'm struggling with what (if anything) should happen on a central server and what should happen locally. Or is centralized approach even needed? Some approaches I might do: Player movement : my thought is to control this locally (player-owner) and update server with positon (which then sends out to other clients). Use client side prediction for opponent players so that connection loss will not show a plane for example stop in mid air. Server will send update and try to smoothly correct an opponent player position to server updated one.But don't update owners position on owners device from server. Powerups (health kit/ammo/coins/etc) : need to see them disappear immediately, so do it locally. Add the health locally, but perhaps allow for server correction. If server doesn't see player near that powerup, reject the powerup and adjust server health for player. Fire weapons: Have to see it happen right away, so fire locally, create local bullet and send on its way. Send rpc to server so that this player on other clients also fires. Hit detection: Get's trickier. Make bullet/projectile disappear locally, and perhaps perform local hit animations (shaking, whatever). non-authoritative approach= take the damage locally and send rpc to server or others to update health and inform of hit. Authoritative approach-Don't take the damage, or adjust health. Server will do that if it detects a hit. Anyway that's my current thought stream. Let me know what you think of the above or what has worked for you.

  Read the article

• Why have we got so many Linux distributions? [closed]

  - by nebukadnezzar

  Pointed to from an answer to another question, I came across this graphic, and I'm shocked how many linux distributions currently exist. However, it seems that most of these distributions are forks of already popular distributions with minimal changes, usually limited to themes, wallpapers and buttons. It would still seem easier to create a sub-distribution with the required changes, such as XUbuntu with XFCE4, KUbuntu with KDE4, Fluxbuntu with Fluxbox, etc. In my mind there are a number of problems with having so many distributions - perhaps less security/stability due to smaller group of developers, and also the confusingly vast range of choice for newcomers to Linux. Some reasons that developers might decide to fork are: Specializing on a particular topic (work-related topic - i.e. for a Hospital, etc) An exceptional architecture, that requires a special set of software Use of non-FOSS, proprietary technology, and such So what other reasons are there that have caused so many people decided to create their own distributions? What are the thought processes that have led to this? And are these "valid" reasons - do we need so many distributions? If you can back your experiences up with references that would be great.

  Read the article

• Hobbyist transitioning to earn money on paid work?

  - by Chelonian

  I got into hobbyist Python programming some years ago on a whim, having never programmed before other than BASIC way back when, and little by little have cobbled together a, in my opinion, nice little desktop application that I might try to get out there in some fashion someday. It's roughly 15,000 logical lines of code, and includes use of Python, wxPython, SQLite, and a number of other libraries, works on Win and Linux (maybe Mac, untested) and I've gotten some good feedback about the application's virtues from non-programmer friends. I've also done a small application for data collection for animal behavior experiments, and an ad hoc tool to help generate a web page...and I've authored some tutorials. I consider my Python skills to be appreciably limited, my SQL skills to be very limited, but I'm not totally out to sea, either (e.g. I did FizzBuzz in a few minutes, did a "Monty Hall Dilemma" simulator in some minutes, etc.). I also put a strong premium on quality user experience; that is, the look and feel matters much to me and the software looks quite good, I feel. I know no other programming languages yet. I also know the basics of HTML/CSS (not considering them programming languages) and have created an artist's web page (that was described by a friend as "incredibly slick"...it's really not, though), and have a scientific background. I'm curious: Aside from directly selling my software, what's roughly possible--if anything--in terms of earning either side money on gigs, or actually getting hired at some level in the software industry, for someone with this general skill set?

  Read the article

• ISO 12207 - testing being only validation activity? [closed]

  - by user970696

  Possible Duplicate: How come verification does not include actual testing? ISO norm 12207 states that testing is only validation activity, while all static inspections are verification (that requirement, code.. is complete, correct..). I did found some articles saying its not correct but you know, it is not "official". I would like to understand because there are two different concepts (in books & articles): 1) Verification is all testing except for UAT (because only user can really validate the use). E.g. here OR 2) Verification is everything but testing. All testing is validation. E.g. here Definitions are mostly the same, as Sommerville's: The aim of verification is to check that the software meets its stated functional and non-functional requirements. Validation, however, is a more general process. The aim of validation is to ensure that the software meets the customer’s expectations. It goes beyond simply checking conformance with the specification to demonstrating that the software does what the customer expects it to do It is really bugging me because I tend to agree that functional testing done on a product (SIT) is still verification because I just follow the requirements. But ISO does not agree..

  Read the article

• Is there a NVIDIA driver (for a 7-series card) that will actually work for 12.10?

  - by DS13

  I see many similar topics on this, but I've tried all their suggestions, and nothing has worked. ISSUE: I do a clean install of Ubuntu 12.10. Boots fine with the “nouveau” graphics driver – graphics are very slow and choppy. The three other driver options in Ubuntu (official NVIDIA drivers), all result in a variation of the black screen on boot up. There will be NO access to a command line/GUI in anyway what-so-ever (tried every option recommended out there, but the system is unusable at this stage). I can only reinstall, and try different drivers…and I only ever get one shot at it. QUESTIONS: Does anyone know of a NVIDIA driver that will actually work with a Nvidia GeForce 7350LE? Or a 7-series card in general? This is my second computer, and I’m just trying to get a working install of Ubuntu on it. I don’t want to put much money into it, as I have seen Ubuntu run great on much older/less capable machines. I’ve got a decent Intel processor (2.3Ghz), 2GB of RAM, 320GB hard drive, 32-bit architecture, and there is no other O/S installed. It appears as if the graphics card is holding me back. Should I just buy a cheap graphics card (non-NVIDIA) to put in as a replacement? TRIED SO FAR: -all drivers available in Ubuntu *all fail -manual install of some different NVIDIA drivers *all fail -also tried installing the generic kernel, Nvidia driver doesn't work in 12.10 *no difference -every method suggested to at least get a command line after switching to a NVIDIA driver *all fail

  Read the article

• What are some ways to separate game logic from animations and the draw loop?

  - by TMV

  I have only previously made flash games, using MovieClips and such to separate out my animations from my game logic. Now I am getting into trying my hand at making a game for Android, but the game programming theory around separating these things still confuses me. I come from a background of developing non game web applications so I am versed in more MVC like patterns and am stuck in that mindset as I approach game programming. I want to do things like abstract my game by having, for example, a game board class that contains the data for a grid of tiles with instances of a tile class that each contain properties. I can give my draw loop access to this and have it draw the game board based on the properties of each tile on the game board, but I don't understand where exactly animation should go. As far as I can tell, animation sort of sits between the abstracted game logic (model) and the draw loop (view). With my MVC mindset, it's frustrating trying to decide where animation is actually supposed to go. It would have quite a bit of data associated with it like a model, but seemingly needs to be very closely coupled with the draw loop in order to have things like frame independent animation. How can I break out of this mindset and start thinking about patterns that make more sense for games?

  Read the article

• How to prevent one account from unlocking products on other devices using Apple StoreKit?

  - by reapz

  We are currently wrapping up a free-to-play game on iOS in which you can purchase non-consumable products. We have been discussing this case internally and are not quite sure what the best practices are as this is our first title. For example, if a user downloads our app, and makes some purchases. These can be restored should the app ever be deleted and reinstalled as long as the user uses the same Apple ID. What is to stop him from making a fake Apple account, purchasing items and then posting this account on the web allowing everyone to get the items for free? That is obviously a worst case situation. But a smaller case would be a user unlocking items for his friends. We do not want this to be an always online game but have considered doing a check on startup if there is internet available. If the currently logged in account doesn't own the products do we lock them again? Probably not because people may simply sign into the device with different Game Center logins at which point we don't want to constantly lock and unlock items. At some point we will be adding multiplayer at which point we can definately do a check with the currently logged in account. This is because A, they will be online when attempting multiplayer, and B, they will want to use their own account for multiplayer. Unfortunately we aren't quite ready for this yet. Has anyone tackled this issue. Are we overthinking here?

  Read the article

• 11.10 install hangs at different places

  - by TreefrogInc

  I've been trying to install Oneiric for some time now, and I've looked everywhere for a solution to the problems I've been having. So far, I've attempted four times to install it, so now I'm up to a point of panic. So I grabbed the 11.10 x64 iso from the website, and after verifying that the md5 hash is correct, I burned that onto my last remaining clean CD. On my first attempt, everything went perfectly up to the middle of the installation, and the progress bar stopped when it said: "configuring target system." I could do everything else, only the installation seemed to have stopped. After I googled my problem, I went and used the "check disc for errors" option, which said everything was fine. Then I tried the installation again, only this time, I selected "Install Ubuntu Now" instead of the "try before installing". Again, the same problem. My second and third tries didn't even reach the installation phase. It just stopped at the 5 blinking dots and never went any further. I used the same non-rewritable cd for all the attempts, as the error check didn't show any problems and because I'm currently out of usable cds. System: Core i3 CPU @ 3.4 GHz, 500 GB HDD (250g used for Win7, 70g used for preexisting system partitions, 180g unallocated).

  Read the article

• Good books or tutorials on building projects without an IDE?

  - by CodexArcanum

  While I'm certainly under no illusions that building software without an IDE is possible, I don't actually know much about doing it well. I've been using graphical tools like Visual Studio or Code::Blocks so long that I'm pretty well lost without them. And that really stinks when I want to change environments or languages. I couldn't really do anything in D until someone made a Visual Studio plugin, and now that I'm trying to do more development on Mac, I can't use D again because the XCode plugins don't work. I'm sick of being lost when I see a .make file and having no idea what I'm supposed to do with a folder full of source files. People can't be compiling them one by one using the console and then linking them one by one. You'd spend more time typing file names than code. So what are the automation and productivity tools of the non-IDE user? How do you manage a project when you're writing all the code in emacs or vim or nano or whatever? I would love it if there was a book or a guide online that spells some of this out.

  Read the article

• Google Analytics Social Tracking implementation. Is Google's example correct?

  - by s_a

  The current Google Analytics help page on Social tracking (developers.google.com/analytics/devguides/collection/gajs/gaTrackingSocial?hl=es-419) links to this page with an example of the implementation: http://analytics-api-samples.googlecode.com/svn/trunk/src/tracking/javascript/v5/social/facebook_js_async.html I've followed the example carefully yet social interactions are not registered. This is the webpage with the non-working setup: http://bit.ly/1dA00dY (obscured domain as per Google's Webmaster Central recommendations for their product forums) This is the structure of the page: In the : ga async code copied from the analytics' page a script tag linking to stored in the same domain. the twitter js loading tag In the the fb-root div the facebook async loading js including the _ga.trackFacebook(); call the social buttons afterwards, like so: (with the proper URL) Tweet (with the proper handle) That's it. As far as I can tell, I have implemented it exactly like in the example, but likes and twitts aren't registered. I have also altered the ga_social_tracking.js to register the social interactions as events, adding the code below. It doesn't work either. What could be wrong? Thanks! Code added to ga_social_tracking.js var url = document.URL; var category = 'Social Media'; /* Facebook */ FB.Event.subscribe('edge.create', function(href, widget) { _gaq.push(['_trackEvent', category, 'Facebook', url]); }); /* Twitter */ twttr.events.bind('tweet', function(event) { _gaq.push(['_trackEvent', category, 'Twitter', url]); });

  Read the article

• Website Design; SEO Dilemma

  - by lemonpole

  Okay so I designed a website for a restaurant and the design is aimed mostly to entice the viewer by using images of the restaurant's platters and foods. Not to say that text is totally non-existent but the design makes it hard to have enough keywords. Most keywords are found in the ALT attribute of image tags and a couple of headers. The reason as to why I am in this dilemma? I'm still new to web development and at the time I made the design, I didn't really know much about SEO. So I come here in search of help because I have an idea... Would it be good practice to have hidden SPAN blocks that would help me fill with keywords? For example a hidden SPAN would have text in bold to help with SEO. Of course, I will play it safe and not exploit this technique if it works. I have searched that this may be considered spamming by search engines and some companies are taking measures to prevent this. Thanks in advance!

  Read the article

• Directx vs XNA - Which is better for me? [closed]

  - by tristo

  Recently I got Visual Studio 2012 from visual studio 2010, although did not expect Visual Studio to 2012 to designed the way it was. Anyway I am pleased with some of VS 2012 technology and have moved all of my projects to it. At this point of time since I got VS 2012 I have been into making windows applications and other non-game activities. ALTHOUGH have recently gotten into the spirit of game development and I am planning to make a 3d comical game, shader effects, not too complicated meshes, but it requires alot of lighting effects to emphasise certain parts of the game. When I was using VS 2010 I had a great time making 2d games with XNA, it uses a great language, and has a very awesome system. But I no longer have XNA with me, and the workarounds described in stackoverflow always gives me errors while using xna. Anyway it seems that microsoft have stuffed themselves up with xna anyway with the weirdness of Windows 8, and it being only avaliabe on pc and xbox. Due to these reasons I have decided to work with Directx and Direct3d to produce my new game, although the overflowing credits after each directx game gives me the shivers, and the low-level coding of directx also puts me on thin ice with my games, left in a confusional mess with what decision I should make. I don't know anything about directx or direct3d. I am an indie developer, but I am planning to take on alot of professional aspects of games. I don't have heaps of time(2-3 hours a day) I don't mind the complexity of how directx works, as long as I can learn how to make the fundementals of a game in a week. I am also unsure if directx is really for my situation, and keep with xna game development. Anyone can tell me the best technology for me would be great.

  Read the article

• Storing editable site content?

  - by hmp

  We have a Django-based website for which we wanted to make some of the content (text, and business logic such as pricing plans) easily editable in-house, and so we decided to store it outside the codebase. Usually the reason is one of the following: It's something that non-technical people want to edit. One example is copywriting for a website - the programmers prepare a template with text that defaults to "Lorem ipsum...", and the real content is inserted later to the database. It's something that we want to be able to change quickly, without the need to deploy new code (which we currently do twice a week). An example would be features currently available to the customers at different tiers of pricing. Instead of hardcoding these, we read them from database. The described solution is flexible but there are some reasons why I don't like it. Because the content has to be read from the database, there is a performance overhead. We mitigate that by using a caching scheme, but this also adds some complexity to the system. Developers who run the code locally see the system in a significantly different state compared to how it runs on production. Automated tests also exercise the system in a different state. Situations like testing new features on a staging server also get trickier - if the staging server doesn't have a recent copy of the database, it can be unexpectedly different from production. We could mitigate that by committing the new state to the repository occasionally (e.g. by adding data migrations), but it seems like a wrong approach. Is it? Any ideas how best to solve these problems? Is there a better approach for handling the content that I'm overlooking?

  Read the article

• Career change: from programming into more human-oriented area [closed]

  - by Art

  I have been a software developer for approximately 9 years, starting with part-time work during my graduation year at uni. During these years I worked for number of companies, sometimes changing places twice or three times a year. They say it takes 10 years to reach 'expert' level, and while I don't think I am an expert by any measure and I have certainly met lots of people who are more knowledgeable, smarter and more focused than I am, I think I can safely say that I had my fair share of the whole programming trade and would like to move on to something else. Psychology and behaviour was always something I was interested in, especially the practical, applicable bits of it. Recently I've been to some communication skills training and I realised that I have been missing out on the great deal of fun stuff - how people work and communicate, especially in subconscious, non-verbal area. Currently I am thinking of making a career change - ideally to move somewhere my technical skill would still be beneficial in some shape or form, or at least could serve as a bridge while I am transitioning there, you know, the whole gradual, bit-by-bit approach versus swim-or-drown one. I would like to hear your thoughts on this matter and to learn from you what are the possible transitions I can take.

  Read the article

• HDA NVidia (GT520) - Sound Issue

  - by Oliver Lucas

  I have an GT520 graphics card and I am trying to get the sound working with my XBMC setup and I'm having trouble. Things I have completed: aplay -l List of PLAYBACK Hardware Devices card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 then lspci 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) and alsamixer which is set to unmuted Everything looks well, so ran: aplay -D hw:0,3 /home/ollie/Music/alex.mp3 Playing raw data '/home/ollie/Music/alex.mp3' : Unsigned 8 bit, Rate 8000 Hz, Mono aplay: set_params:1059: Sample format non available Available formats: - S16_LE - S32_LE with no luck.. then speaker-test Playback device is default Stream parameters are 48000Hz, S16_LE, 1 channels Using 16 octaves of pink noise Playback open error: -2,No such file or directory also tried running through ftp://download.nvidia.com/XFree86/gpu-hdmi-audio-document/gpu-hdmi-audio.html#upgrading_alsa_driver and http://wiki.xbmc.org/index.php?title=HOW-TO:Setup_audio_over_HDMI_on_nVidia_GeForce/nForce_controller plus 20 other websites with selective "fixes" etc.. but no luck _< I am a complete beginner with Ubuntu so this is a really steep learning curve for me, not sure I'm learning much though as its all just headaches atm! Thanks for any help Ollie

  Read the article

• Installing ubuntu 12.04 on macbook pro9,2

  - by stariz77

  I seem to have tried all the various suggested methods for installing ubuntu on a mbp, but can't seem to get anything that works and was wondering if anyone has run into any new problems with the latest non-retina models? I have a core i7 in my macbook, and model identifier is MacBookPro9,2. I have partitioned my HD using disk utility and have 700gig free space ready for the install (I haven't removed OSX Lion, it is still there in a 50gig partition). Problem: I am just getting a blank screen with a blinking cursor (unresponsive) in the top left whenever I boot from the disk. I left it for 20 minutes and nothing ever happened. This was without any boot manager, just holding "c" on startup. Attempted remedies: I have downloaded the 64 ubuntu iso from their site 3 times now and burned 4 separate discs to rule out some kind of corruption or burn error. I burned one in OSX Lion 10.7.4 and 3 on my windows 7 pc. I tried holding "alt" instead and then navigating to the windows disc to boot. Same thing happens, blank blinking unresponsive cursor. I also tried going to the EFI disc which actually brings up a menu (after saying "error prefix is not set") asking if I want to install ubuntu, test for errors or partition. All three options lead me to an unresponsive blank screen (some without cursors). I downloaded and installed rEFIt and if I hold "alt" on startup a linux penguin (Boot Linux from CD) appears in my boot options, along with the apple boot, and two others that I'm not sure of: "Boot EFI\boto\bootx64.efi from" and "Boot Legacy OS from". The "Boot Linux from CD" just takes me to the blank blinking cursor screen; again, I left if for 10+ minutes and nothing. I heard that the detection of the graphics card might be a problem and that I need change to nomodeset, but I have tried pressing F6 in all of the boot menus listed above and no options appear. Does anyone have any other suggested routes or can you see what I might have done wrong?

  Read the article

• Using Queries with Coherence Write-Behind Caches

  - by jpurdy

  Applications that use write-behind caching and wish to query the logical entity set have the option of querying the NamedCache itself or querying the database. In the former case, no particular restrictions exist beyond the limitations intrinsic to the Coherence query engine itself. In the latter case, queries may see partially committed transactions (e.g. with a parent-child relationship, the version of the parent may be different than the version of the child objects) and/or significant version skew (the query may see the current version of one object and a far older version of another object). This is consistent with "read committed" semantics, but the read skew may be far greater than would ever occur in a non-cached environment. As is usually the case, the application developer may choose to accept these limitations (with the hope that they are sufficiently infrequent), or they may choose to validate the reads (perhaps via a version flag on the objects). This also applies to situations where a third party application (such as a reporting tool) is querying the database. In many cases, the database may only be in a consistent state after the Coherence cluster has been halted.

  Read the article

< Previous Page | 266 267 268 269 270 271 272 273 274 275 276 277  | Next Page >