Search Results

Search found 20581 results on 824 pages for 'catalyst control centre'.

Page 272/824 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Moving data files failing

  - by Miles Hayler

  Trying to migrate data from C: to D: via the SBS console is failing. The wizard starts running but drops out in the first few seconds. I'll post the full logs, but the important lines appear to be as follows: An exception of type 'Type: System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred. Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) Stack: at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: GetServerBackupTaskStatus: fail to find the task --- ErrorCode:0 I've been googling for days with no luck. I have found that mscorlib is a component of .net, and I've discovered multiple instances of the file in %windir%, %windir%\winsxs, %windir%\Microsoft.net Anyone come across and fixed this one before? --------------------------------------------------------- [1516] 110315.190856.1105: Storage: Initializing...C:\Program Files\Windows Small Business Server\Bin\MoveData.exe [1516] 110315.190856.2875: Storage: Data Store to be moved: Exchange [1516] 110315.190856.5305: TaskScheduler: Exception System.IO.FileNotFoundException: [1516] 110315.190856.5605: Exception: --------------------------------------- An exception of type 'Type: System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred. Timestamp: 03/15/2011 19:08:56 Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) Stack: at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) [1516] 110315.190856.5625: Storage: Exception Microsoft.WindowsServerSolutions.Common.WindowsTaskSchedulerException: [1516] 110315.190856.5635: Exception: --------------------------------------- [b]An exception of type 'Type: Microsoft.WindowsServerSolutions.Common.WindowsTaskSchedulerException, Common, Version=6.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' has occurred.[/b] Timestamp: 03/15/2011 19:08:56 Message: Failed to find the task path Stack: at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) at Microsoft.WindowsServerSolutions.Storage.Common.ServerBackupUtility.GetServerBackupTaskStatus() --------------------------------------- An exception of type 'Type: System.IO.FileNotFoundException, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' has occurred. Timestamp: 03/15/2011 19:08:56 Message: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) Stack: at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) [1516] 110315.190856.5665: Storage: Error Retrieving Server Backup Task Status: ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: GetServerBackupTaskStatus: fail to find the task ---> ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Common.WindowsTaskSchedulerException: Failed to find the task path ---> System.IO.FileNotFoundException: The system cannot find the file specified. (Exception from HRESULT: 0x80070002) at TaskScheduler.TaskSchedulerClass.GetFolder(String Path) at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Common.WindowsTaskScheduler..ctor(String taskPath, String taskName) at Microsoft.WindowsServerSolutions.Storage.Common.ServerBackupUtility.GetServerBackupTaskStatus() --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.Common.ServerBackupUtility.GetServerBackupTaskStatus() at Microsoft.WindowsServerSolutions.Storage.MoveData.Helper.get_ServerBackupTaskState() [1516] 110315.190857.6216: Storage: Backup Task State: Unknown [1516] 110315.190857.9347: Storage: Launching the Move Data Wizard! [1516] 110315.190857.9397: Wizard: Admin:QueryNextPage(null) = Storage.MoveDataWizard.GettingStartedPage [1516] 110315.190857.9417: Wizard: TOC Storage.MoveDataWizard.GettingStartedPage is on ExpectedPath [1516] 110315.190857.9577: Wizard: Storage.MoveDataWizard.GettingStartedPage entered [1516] 110315.190857.9657: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.GettingStartedPage) = Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190857.9657: Wizard: TOC Storage.MoveDataWizard.DiagnoseDataStorePage is on ExpectedPath [1516] 110315.190857.9657: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.DiagnoseDataStorePage) = Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190857.9657: Wizard: TOC Storage.MoveDataWizard.NewDataStoreLocationPage is on ExpectedPath [1516] 110315.190857.9657: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.NewDataStoreLocationPage) = null [1516] 110315.190857.9697: Wizard: ---------------------------------- [1516] 110315.190857.9697: Wizard: The pages visted: [1516] 110315.190857.9697: Wizard: Current Page := [TOC Storage.MoveDataWizard.GettingStartedPage] [1516] 110315.190857.9697: Wizard: [TOC] : TOC Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190857.9697: Wizard: [TOC] : TOC Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190857.9697: Wizard: Step 1 of 3 [1516] 110315.190907.0406: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.GettingStartedPage) = Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190907.0416: Wizard: Storage.MoveDataWizard.GettingStartedPage exited with the button: Next [1516] 110315.190907.0416: WizardChainEngine Next Clicked: Going to page {0}.: Storage.MoveDataWizard.DiagnoseDataStorePage [1516] 110315.190907.0496: Wizard: Storage.MoveDataWizard.DiagnoseDataStorePage entered [1516] 110315.190907.0606: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.DiagnoseDataStorePage) = Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190907.0606: Wizard: Admin:QueryNextPage(Storage.MoveDataWizard.NewDataStoreLocationPage) = null [1516] 110315.190907.0606: Wizard: ---------------------------------- [1516] 110315.190907.0606: Wizard: The pages visted: [1516] 110315.190907.0606: Wizard: [TOC] visited: TOC Storage.MoveDataWizard.GettingStartedPage [1516] 110315.190907.0606: Wizard: Current Page := [TOC Storage.MoveDataWizard.DiagnoseDataStorePage] [1516] 110315.190907.0616: Wizard: [TOC] : TOC Storage.MoveDataWizard.NewDataStoreLocationPage [1516] 110315.190907.0616: Wizard: Step 2 of 3 [19772] 110315.190907.0656: Storage: Starting System Diagnosis [19772] 110315.190907.0656: Storage: Getting Data Store Information [19772] 110315.190907.1086: Storage: Create the list of storage and DB directory path [19772] 110315.190907.1246: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks..ctor [19772] 110315.190907.1546: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.Initialize [19772] 110315.190907.1596: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190907.1606: Messaging: Exchange install path: C:\Program Files\Microsoft\Exchange Server\bin [19772] 110315.190908.4157: Messaging: E12 Monad runspace created ID: Microsoft.PowerShell [19772] 110315.190908.4237: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190908.4287: Messaging: Executed management shell command: get-exchangeserver [19772] 110315.190910.2369: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190910.2369: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190910.5699: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.GatherAdminInfo [19772] 110315.190910.5699: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190910.5719: Messaging: Executed management shell command: get-user -Identity "dmagroup.local\Administrator" [19772] 110315.190911.0870: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.0880: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.0880: Messaging: Executed management shell command: get-mailbox -Identity "d2ae2bf0-48a7-4ce9-9e72-bb3c765454ac" [19772] 110315.190911.1300: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1310: Messaging: User Administrator is mail enabled and can use MessagingManagement to send mail. [19772] 110315.190911.1310: Messaging: Email address used for user: [email protected] [19772] 110315.190911.1440: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1440: Messaging: Executed management shell command: get-group -Identity "Domain Admins" [19772] 110315.190911.1630: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1640: Messaging: User Administrator is a member of Domain Admins and can use MessagingManagement to manage Exchange. [19772] 110315.190911.1640: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.GatherAdminInfo [19772] 110315.190911.1640: Messaging: MessagingManagement enabled for Exchange management: True [19772] 110315.190911.1640: Messaging: MessagingManagement enabled for mail submission: True [19772] 110315.190911.1640: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingTasks.Initialize [19772] 110315.190911.1640: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Tasks.TaskMoveExchangeData.CreateDataStoreDriveList [19772] 110315.190911.1670: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190911.1670: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.1670: Messaging: Executed management shell command: get-storagegroup -Server "SERVER01" [19772] 110315.190911.2990: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.3070: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190911.3070: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.3070: Messaging: Executed management shell command: get-mailboxdatabase -Server "SERVER01" [19772] 110315.190911.4440: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.4520: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.Initialize [19772] 110315.190911.4520: Messaging: Begin Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.4520: Messaging: Executed management shell command: get-publicfolderdatabase -Server "SERVER01" [19772] 110315.190911.5240: Messaging: End Microsoft.WindowsServerSolutions.Messaging.Management.MessagingRunspace.StaticExecute [19772] 110315.190911.5510: Storage: Data Store Drive/s Details:Name=C:\,Size=12675712420 [19772] 110315.190911.5510: Storage: Data Store Size Details: Current Total Size=12675712420 Required Size=12675712420 [19772] 110315.190911.5510: Storage: MoveData Task can move the Data Store=True [19772] 110315.190911.8401: Storage: An error was encountered when performing system diagnosis : ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: WMI error occurred while accessing drive ---> System.Management.ManagementException: Not found at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) at Microsoft.WindowsServerSolutions.Storage.Common.DataStoreInfo.LoadAvailableDrives() at Microsoft.WindowsServerSolutions.Storage.Common.MoveDataUtil.CanMoveData(DataStoreInfo storeInfo, MoveDataError& error) at Microsoft.WindowsServerSolutions.Storage.MoveData.DiagnoseDataStorePagePresenter.DiagnoseDataStore(Object sender, DoWorkEventArgs args) [1516] 110315.190912.0331: Storage: An error occured during the execution: System.Reflection.TargetInvocationException: Exception has been thrown by the target of an invocation. ---> ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: Diagnosing the Data Store failed (see the inner exception) ---> ErrorCode:0 BaseException: Microsoft.WindowsServerSolutions.Storage.Common.StorageException: WMI error occurred while accessing drive ---> System.Management.ManagementException: Not found at System.Management.ManagementException.ThrowWithExtendedInfo(ManagementStatus errorCode) at System.Management.ManagementObjectCollection.ManagementObjectEnumerator.MoveNext() at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.Common.DriveUtil.IsDriveRemovable(String drive) at Microsoft.WindowsServerSolutions.Storage.Common.DataStoreInfo.LoadAvailableDrives() at Microsoft.WindowsServerSolutions.Storage.Common.MoveDataUtil.CanMoveData(DataStoreInfo storeInfo, MoveDataError& error) at Microsoft.WindowsServerSolutions.Storage.MoveData.DiagnoseDataStorePagePresenter.DiagnoseDataStore(Object sender, DoWorkEventArgs args) at System.ComponentModel.BackgroundWorker.WorkerThreadStart(Object argument) --- End of inner exception stack trace --- at Microsoft.WindowsServerSolutions.Storage.MoveData.DiagnoseDataStorePagePresenter.backgroundWorker_RunWorkerCompleted(Object sender, RunWorkerCompletedEventArgs e) --- End of inner exception stack trace --- at System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) at System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) at System.Delegate.DynamicInvokeImpl(Object[] args) at System.Windows.Forms.Control.InvokeMarshaledCallbackDo(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbackHelper(Object obj) at System.Threading.ExecutionContext.runTryCode(Object userData) at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData) at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state) at System.Windows.Forms.Control.InvokeMarshaledCallback(ThreadMethodEntry tme) at System.Windows.Forms.Control.InvokeMarshaledCallbacks() at System.Windows.Forms.Control.WndProc(Message& m) at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardFrameView.Create() at Microsoft.WindowsServerSolutions.Common.Wizards.Framework.WizardChainEngine.Launch() at Microsoft.WindowsServerSolutions.Storage.MoveData.MainClass.LaunchMoveDataWizard() at Microsoft.WindowsServerSolutions.Storage.MoveData.MainClass.Main(String[] args)

  Read the article

• Chrome caching 302 redirects

  - by Thermionix

  I have a php script with is used to rotate banner images on a site. Under Firefox/IE page refreshes will make another request and a different image will be returned. Under Chrome, the request seems to be cached and only opening the page in a new tab will cause it to actually query the script. I believe this used to work in older versions of chrome, I've tried a few different types of redirect codes all with the same result. Any tips? <img class="banner" src="/inc/banner.php" alt=""> ~$ cat /var/www/inc/banner.php <?php header("HTTP/1.1 302 Redirect"); header("Cache-Control: max-age=0, no-cache, no-store, must-revalidate"); //header('HTTP/1.1 307 Temporary Redirect'); //header("expires: none"); //header("expires: max"); //header("Cache-Control: public"); $folder = '../img/banner/'; $exts = 'jpg jpeg png gif'; $files = array(); $i = -1; if ('' == $folder) $folder = './'; $handle = opendir($folder); $exts = explode(' ', $exts); while (false !== ($file = readdir($handle))) { foreach($exts as $ext) { // for each extension check the extension if (preg_match('/\.'.$ext.'$/i', $file, $test)) { // faster than ereg, case insensitive $files[] = $file; // it's good ++$i; } } } closedir($handle); // We're not using it anymore mt_srand((double)microtime()*1000000); // seed for PHP < 4.2 $rand = mt_rand(0, $i); // $i was incremented as we went along header('Location: '.$folder.$files[$rand]); flush(); ?> curl output; ~$ curl -I -k https://example.net/inc/banner.php HTTP/1.1 302 Redirect Server: nginx/1.1.14 Date: Fri, 24 Feb 2012 03:23:46 GMT Content-Type: text/html Connection: keep-alive X-Powered-By: PHP/5.3.10-1ubuntu1 Cache-Control: max-age=0, no-cache, no-store, must-revalidate Location: ../img/banner/2.jpg

  Read the article

• Silent install FirePro v4900 Driver on Windows Embedded 7 Standard

  - by Birgit_B

  I'm trying to install the Drivers for a FirePro v4900 on a Windows Embedded 7 Standard 64bit OS. I want the system to be as small as possible, so i would rather not install the whole catalyst control center, but only the necessary drivers. Because the installation should be accomplished absolutely unattended, the installation process of the FirePro-Driver should also be done without any user interaction. I see two possible solutions for the Problem: Install only the Drivers: Is it possible to solely install the necessary drivers? How would i achieve that? This solution would be the preferred one, because of the smaller footprint. Silent custom install the provided "FirePro_8.911.3.3_VistaWin7_X32X64_135673.exe" (found at ATI FirePro™ Driver). Is there a way, to do that? Thank you in advance for your support! Update: I managed to accomplish a silent installation. I extracted the contents of the above mention installer-file and ran \$_OUTDIR\Bin64\Setup.exe -Install. (There are some other Parameters, just run Setup.exe /?). But i couldn't achieve to just install the drivers without the Cataclyst Control Center, and it seams the Control Center has some unfulfilled dependencies and so it crashes...

  Read the article

• OpenVZ Can't initialize containers after install

  - by Tonino Jankov

  I have installed OpenVZ on centos 6 on a dedicated server. I followed quick installation guide on openvz wiki. After installing thru yum, I don't know why, but grub.conf wasn't automatically updated to accomodate new kernel, so I had to do it manually. I edited grub.conf, added openvz kernel and rebooted - it went fine. Server went up into openvz kernel and it worked, it started openvz service byitself. But after I created a container, added IP to it and attempted to start it, I couldn't. Here is the output from the shell: [root@cloud2 ~]# vzctl start 86 Starting container ... Container is mounted Container start failed (try to check kernel messages, e.g. "dmesg | tail") Container is unmounted [root@cloud2 ~]# dmesg | tail [ 1973.401596] CT: 86: failed to start with err=-105 [ 2107.113850] Failed to initialize the ICMP6 control socket (err -105). [ 2107.155523] CT: 86: stopped [ 2107.155543] CT: 86: failed to start with err=-105 [ 6348.282184] Failed to initialize the ICMP6 control socket (err -105). [ 6348.330348] CT: 86: stopped [ 6348.330361] CT: 86: failed to start with err=-105 [45184.024002] Failed to initialize the ICMP6 control socket (err -105). [45184.072086] CT: 86: stopped [45184.072099] CT: 86: failed to start with err=-105 [root@cloud2 ~]# I don't know what is wrong. I tried different templates, debian 6, centos 6, i386, amd64, but the issue is the same. What is the problem?

  Read the article

• NIC are not advertising Correct Speeds

  - by Squidly

  I have an IBM x336 that is not advertising the proper LINK speeds. One interface is the other is not. I've tried to Force it to 1000/Full but then it just shows link down. I have confirmed the switch is set to auto negotiate like my switches. I have also changed out my Ethernet Cables. I'm at a loss where to look further. I have verified that it will connect at 1G on a different swtich. This also has happened on two different servers on the same switch. This is my output from mii-tool -v for each interface. eth0: negotiated 100baseTx-FD, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD eth1: negotiated 1000baseT-FD flow-control, link ok product info: vendor 00:08:18, model 24 rev 0 basic mode: autonegotiation enabled basic status: autonegotiation complete, link ok capabilities: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD advertising: 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD flow-control link partner: 1000baseT-HD 1000baseT-FD 100baseTx-FD 100baseTx-HD 10baseT-FD 10baseT-HD

  Read the article

• System recognizes admin password on the Welcome screen but not when elevating

  - by Lee C.

  I set up Windows 7 with a couple of standard accounts, and an administrator account (called Odin). I can log in to Odin just fine from the Welcome screen. While logged into Odin I can do anything that requires administrator privileges without a password: just hit Yes in the User Account Control dialog. If I am logged into one of the other accounts and I do something that requires elevation (e.g. most installers, and some control panel functionality), then Windows presents me with a User Account Control dialog asking "Do you want to allow the following program to make changes to this computer? To continue, type an administrator password, and then click Yes." The account shown in this dialog is Odin, so I enter Odin's password. But Windows redisplays the dialog with the message "Logon failure: unknown user name or bad password." This always happens, and has done so for many months, probably since I first got the computer. Why does Odin's password work from the Welcome screen, but not when elevating? Please note that I am not asking how to recover Odin's password. I remember the password I originally set for Odin, and it works as it should from the Welcome screen, but is not recognized when elevating. The password has no funny characters, just letters and digits. Thanks!

  Read the article

• Unable to PPTP through NAT on Cisco 881

  - by MasterRoot24

  I'm trying to connect to a PPTP server which is sat behind a Cisco 881 NAT router. The server is running Ubuntu Server 12.04 and is running Poptop pptpd as the PPTP daemon listening for connections. As discussed in my other question, I'm trying to setup a Cisco 881 router to replace my old Linksys WAG320N. This same server and WAN connection worked fine with the WAG320N with no special configuration, other than allowing 1723 in through the firewall. On the Cisco 881, I'm using the newer ip nat enable or NAT NVI to setup static routes in through the firewall for the services running behind the router. My reason being that I can't run another copy of my live DNS domains internally with local IP addresses in. For the purposes of this question, though, I have rebuilt the router with ip nat inside/outside style NAT'ing, but this issue is still apparent. HTTP/SMTP/IMAP etc. all work ok from both the WAN and LAN interfaces of the router. I'm only having issues with SIP (see other question) and PPTP. My issue is that the GRE doesn't appear to be passing through NAT correctly and one end of the connection is not receiving GRE traffic when it should be, so the server hangs up the connection. Here's an example of /var/log/syslog with debug enabled in /etc/pptpd.conf: Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: MGR: Launching /usr/sbin/pptpctrl to handle client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pppd options file = /etc/ppp/pptpd-options Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection started Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 1) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a START CTRL CONN RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 156 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 7) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Set parameters to 100000000 maxbps, 64 window size Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Made a OUT CALL RPLY packet Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Starting call (launching pppd, opening GRE) Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: pty_fd = 6 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: tty_fd = 7 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: I wrote 32 bytes to the client. Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: CTRL: Sent packet to client Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): program binary = /usr/sbin/pppd Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): local address = 192.168.1.50 Dec 11 21:06:30 <HOSTNAME> pptpd[22627]: CTRL (PPPD Launcher): remote address = 192.168.1.51 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Plugin /usr/lib/pptpd/pptpd-logwtmp.so loaded. Dec 11 21:06:30 <HOSTNAME> pppd[22627]: pppd 2.4.5 started by root, uid 0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Using interface ppp0 Dec 11 21:06:30 <HOSTNAME> pppd[22627]: Connect: ppp0 <--> /dev/pts/3 Dec 11 21:06:30 <HOSTNAME> pptpd[22626]: GRE: Bad checksum from pppd. Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Received PPTP Control Message (type: 15) Dec 11 21:06:31 <HOSTNAME> pptpd[22626]: CTRL: Got a SET LINK INFO packet with standard ACCMs Dec 11 21:07:00 <HOSTNAME> pppd[22627]: LCP: timeout sending Config-Requests Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Connection terminated. Dec 11 21:07:00 <HOSTNAME> avahi-daemon[1042]: Withdrawing workstation service for ppp0. Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Modem hangup Dec 11 21:07:00 <HOSTNAME> pppd[22627]: Exit. Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: GRE: read(fd=6,buffer=6075a0,len=8196) from PTY failed: status = -1 error = Input/output error, usually caused by unexpected termination of pppd, check option syntax and pppd logs Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: PTY read or GRE write failed (pty,gre)=(6,7) Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Reaping child PPP[22627] Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Client 82.132.248.216 control connection finished Dec 11 21:07:00 <HOSTNAME> pptpd[22626]: CTRL: Exiting now Dec 11 21:07:00 <HOSTNAME> pptpd[5803]: MGR: Reaped child 22626 As far as Cisco are concerned, all I need is ip nat source static tcp <SERVER LAN IP> 1723 interface FastEthernet4 1723 but of course this doesn't seem to the be helping the GRE traffic through as it should. Trying the connection to the LAN IP of the server from the same LAN as the server (behind the router), the PPTP connection works fine, so I'm confident that the server's config is ok. Furthermore, all I needed on my WAG320N was to open 1723 in the firewall. Here's my current router config: ! ! Last configuration change at 20:20:15 UTC Tue Dec 11 2012 by xxx version 15.2 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname xxx ! boot-start-marker boot-end-marker ! ! enable secret 4 xxxx ! aaa new-model ! ! aaa authentication login local_auth local ! ! ! ! ! aaa session-id common ! memory-size iomem 10 ! crypto pki trustpoint TP-self-signed-xxx enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-xxx revocation-check none rsakeypair TP-self-signed-xxx ! ! crypto pki certificate chain TP-self-signed-xxx certificate self-signed 01 xxx quit ip gratuitous-arps ip auth-proxy max-login-attempts 5 ip admission max-login-attempts 5 ! ! ! ! ! ip domain list dmz.xxx.local ip domain list xxx.local ip domain name dmz.xxx.local ip name-server 192.168.1.x ip cef login block-for 3 attempts 3 within 3 no ipv6 cef ! ! multilink bundle-name authenticated license udi pid CISCO881-SEC-K9 sn xxx ! ! username admin privilege 15 secret 4 xxx username joe secret 4 xxx ! ! ! ! ! ip ssh time-out 60 ! ! ! ! ! ! ! ! ! interface FastEthernet0 no ip address ! interface FastEthernet1 no ip address ! interface FastEthernet2 no ip address ! interface FastEthernet3 switchport access vlan 2 no ip address ! interface FastEthernet4 ip address dhcp ip nat enable duplex auto speed auto ! interface Vlan1 ip address 192.168.1.x 255.255.255.0 no ip redirects no ip unreachables no ip proxy-arp ip nat enable ! interface Vlan2 ip address 192.168.0.x 255.255.255.0 ! ip forward-protocol nd ip http server ip http access-class 1 ip http authentication local ip http secure-server ! ! ip nat source list 1 interface FastEthernet4 overload ip nat source list 2 interface FastEthernet4 overload ip nat source static tcp 192.168.1.x 1723 interface FastEthernet4 1723 ! ! access-list 1 permit 192.168.0.0 0.0.0.255 access-list 2 permit 192.168.1.0 0.0.0.255 ! ! ! ! control-plane ! ! banner motd Authorized Access only ! line con 0 exec-timeout 15 0 login authentication local_auth line aux 0 exec-timeout 15 0 login authentication local_auth line vty 0 4 access-class 2 in login authentication local_auth length 0 transport input all ! ! end UPDATE 16/12/2012: The only progress that I have been able to make on this issue is that I'm confident that the issue is caused by the GRE tunnels (which are required for the PPTP connection to complete) are being blocked. When attempting a connection, I can see in show ip nat nvi translations that both a TCP translation on 1723 is setup and also a GRE translation is setup also. I appear to be able to see GRE related packets on the LAN that the server is on, so I am lead to believe that the server is sending(?) GRE packets, however running Wireshark on a client PC when attempting a connection shows absolutely no GRE packets. Whilst there are no configuration directives in my config posted above (that I can pin point) which would specifically block them, it would appear that the GRE packets are not being allowed in/out of the router's firewall, even though a NAT translation entry is setup to the server's LAN address. Would anyone be able to provide me with some help to ensure that GRE packets are not blocked by the router's firewall, so that this can be ruled out as a possible issue please?

  Read the article

• How to use AND/OR Building Block content in a Word 2007 template

  - by JimmyJames

  I am creating a Schedule of Work template and am successfully using Developer Tab and Quick Parts to allow user to choose content on an "either/or" basis: either A; OR B; OR C; etc., essentially choose one option from many. One Building Block control, one paragraph, nice and clean. Now what I need to do but cannot seem to figure out, is how to allow user to choose content on an "and/or" basis: either A AND B; A OR B AND C; B AND D AND E OR F; etc., essentially choose several options from many on a variable basis. One Building Block control, maybe one paragraph, maybe three or more paragraphs. Not so clean. I thought of building choice options for all possible paragraph combinations, but I can have as many as 7 or 8 different paragraphs, and that solution quickly becomes unworkable. Multiple controls--some of which will be left unused doesn't work either, since I cannot find an easy way to have a "Choose or Delete" control that actually deletes if "Delete" is chosen. Recommendations are most welcome.

  Read the article

• CSS and JS files not being updated, supposedly because of Nginx Caching

  - by Alberto Elias

  I have my web app working with AppCache and I would like that when I modify my html/css/js files, and then update my Cache Manifest, that when the user accesses my web app, they will have an updated version of those files. If I change an HTML file, it works perfectly, but when I change CSS and JS files, the old version is still being used. I've been checking everything out and I think it's related to my nginx configuration. I have a cache.conf file that contains the following: gzip on; gzip_types text/css application/x-javascript text/x-component text/richtext image/svg+xml text/plain text/xsd text/xsl text/xml image/x-icon; location ~ \.(css|js|htc)$ { expires 31536000s; add_header Pragma "public"; add_header Cache-Control "max-age=31536000, public, must-revalidate, proxy-revalidate"; } location ~ \.(html|htm|rtf|rtx|svg|svgz|txt|xsd|xsl|xml)$ { expires 3600s; add_header Pragma "public"; add_header Cache-Control "max-age=3600, public, must-revalidate, proxy-revalidate"; } And in default.conf I have my locations. I would like to have this caching working on all locations except one, how could I configure this? I've tried the following and it isn't working: location /dir1/dir2/ { root /var/www/dir1; add_header Pragma "no-cache"; add_header Cache-Control "private"; expires off; } Thanks

  Read the article

• About to go live: virtual dedicated server or cloud?

  - by morpheous

  I am about to launch my startup company, and we will be going live in a few weeks time. We have really tight budgetary constraints, since we are bootstrapping - and would prefer not to raise external capital. I cant use shared hosting because I need more control of the server machine (for technical reasons - e.g. using proprietary extensions to PHP, Apache and in the database layer as well) - but want to control costs and dont want to go fully private server route, until we have determined the market size etc. So the only real alternatives AFAIK is between virtual server and the cloud. At the moment, cloud services seem a bit "vague" to me. My understanding is that they allow an entity to outsource its IT infrastructure, which in my mind (at least), is indistinguishable from what a hosting provider provides (at least from a functional point of view) - I would like to seek some clarification on exactly what the difference between the two is. Back to my original question, my requirements are: IT infrastructure that can scale with growth Ability to have control of the machine (for e.g. to install our internally developed libraries etc) Backup software that is flexible and comprehensive enough (yet simple to use), that allows a (secured) backup strategy to be implemented. On this issue, I have always wondered where the actual backed up data was stored (since the physical machines are remote, and one cant get access to any actual tapes etc backed onto). I would also like some advice and recommendations in this area. Regarding data size, I am expecting the dataset to be increasing by a few megabytes of data (originally, say 10Mb, in about a years time, possibly 50Mb) every day. As an aside, I have decided to deploy on a Debian server (most of my additional libraries etc were compiled and built on a Debian machine). Mindful of all of the above, I would like some advice (and reason) as to which route to take. I would also like some advice on which backup software to use, from people who have walked a similar path.

  Read the article

• Cannot Access Shared Folder From IIS

  - by Tim Scott

  From IIS I need to access a folder on another computer. Both servers are Window 2008 SP2, and they live in a Virtual Private Cloud on Amazon EC2. They reach one another by private IP -- they are in WORKGROUP, not a domain. I can access the shared folder manually when logged in to the client as Administrator. But IIS gets "access denied." Here's what I have done: Set File Sharing = ON Set Password Protected Sharing = OFF Set Public Folder Sharing = ON Shared the folder Added permission to the share: Everyone, Full Control Added permission to the share: NETWORK SERVICE, Full Control Verified that File & Printer Sharing is checked in Windows Firewall Opened port 445 to inbound traffic from local sources I tried adding <remote-machine-name>\NETWORK SERVICE to the share but it says it does not recognize the machine, which makes sense, I guess. As I said, from the other computer I have no trouble accessing the shared folder from my user account, but IIS is shut out. How does the file server even know the difference? I would assume that with Everyone given full control and password protected sharing turned off, it would not matter what the client user account is. In any case, how to solve? UPDATE: To clarify, I am not trying to serve up files on the share directly through IIS. Rather I am writing files to the share from my code (System.IO).

  Read the article

• Win7 - Opening "Programs and Features" as Admin from command line (logged in as regular user)

  - by user1741264

  We have Win7 machines on a domain that we'd like to open the "Programs and Features" control applet via the command line while a regular user is logged in. Heres the catch: I know how to do this using runas from command line BUT after "Programs and Features" opens, I dont truly have the ability to remove a program. I am told that I need to be an Admin to do so. Here are the commands I have tried: runas /user:%computername%\administrator cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: control appwiz.cpl runas /user:%computername%\administrator cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl runas /user:%companydomain%\%domainadminacct% cmd.exe then in the new cmd window running: rundll32.exe shell32.dll,Control_RunDLL appwiz.cpl I have also tried all of the above as one long line of code instead of launching a cmd.exe as Admin As you can see, I have tried running the command using both a local admin account (Administrator) AND a domain admin account. I have alos tried launching the runas command as one long command (opening the "programs and features") AND 1st launching a cmd.exe with admin rights and THEN launching the "Prgrams and Features" window. The result is the same: The "Programs and Features" windows opens but when I try to perform an uninstall, I am told I need Admin rights. Thus I am lead to believe that this instance of "Programs and Features" is not truly being run as an admin I am trying to avoid logging the regular user out. I am also aware that every program has its own uninstaller, I do not want to uninstall that way. I want to use the uninstaller in "Programs and Features". Any help is appreciated.

  Read the article

• CloudFront with Custom Origin and ELB

  - by kmfk

  We are using CloudFront for our static assets but also wanted to allow for Gzip. We set up a new distribution with a custom origin pointing back to our application servers which are behind a elastic load balancer. We manually keep the files in sync across the cluster and update them when we publish. However, with this set up, we get nothing but Miss and RefreshHits from CloudFront, which so far has defeated the purpose. Is there any additional settings in order to use an ELB as your custom origin? In the docs, it references this as a viable solution. It appears when we point the distribution to a single server in our production cluster, cloudfront properly caches our assets. Is it possible that the sticky sessions cookie and the subsequent header that gets added by it could be an issue? Cache-Control: no-cache="set-cookie" //Added by load balancer Any ideas? FYI - currently, we have our custom origin pointing to a single EC2 instance, so caching is working correctly - in case you try to curl the file below. Example headers: curl -I http://static.quick-cdn.com/css/9850999.css HTTP/1.0 200 OK Accept-Ranges: bytes Cache-Control: max-age=3700 Cache-Control: no-cache="set-cookie" Content-Length: 23038 Content-Type: text/css Date: Thu, 12 Apr 2012 23:03:52 GMT Last-Modified: Thu, 12 Apr 2012 23:00:14 GMT Server: Apache/2.2.17 (Ubuntu) Vary: Accept-Encoding X-Cache: RefreshHit from cloudfront X-Amz-Cf-Id: K_q7Zy3_jdzlEJ85ukELVtdx1GmuXqApAbZZ7G0fPt0mxRMqPKX5pQ==,RzJmPku-rEIO9WlvuSoKa8hiAaR3dLk5KC4cQMWWrf_MDhmjWe8n6A== Via: 1.0 28c34f9fbf559a21ee16594849e4fc9c.cloudfront.net (CloudFront) Connection: close

  Read the article

• "Access is Denied" when executing application from Command Prompt

  - by xpda

  Today when I tried to run an old DOS utility from the XP Command prompt, I got the message "Access is Denied." Then I found that most of the DOS utilities would not run, even though I have "full control" over them. They worked just fine a few weeks ago, and I have not made any OS changes other than Windows Upgrades. Then I tried running edlin.exe and edit.com from the Windows\system32 folder. Same result - "Access is Denied." I tried running these applications from Windows Explorer and got the message "Windows cannot access the specified device, path, or file. You may not have the appropriate permissions to access the item." I am logged in as a member of Administrators and have full control over these files. I tried logging in as THE Administrator, with no change. I checked the security settings on the files, and have full control over all of them. I have tried copying the files to different drives, booting in safe mode, and running without antivirus and firewall, all with no change. Does anybody know what could cause this?

  Read the article

• How to better copy&paste big files over RDP?

  - by WebMAOhist

  Recently I was making a few attempts to copy&paste a big (1.2 GB) file to remote computer over RDP. The remote computer is virtual testing machine with MS Windows Server 2008 Datacenter. First I tried to copy&paste before midnight when the transfer speed was limited by client computer ISP to 100 kB/s. So, it required a few hours and I was forced to cancel transfer since remote desktop became too unresponsive and sluggish (slow). So, I re-started it over midnight when my local transfer speed is over 4 GB/s 4MB/s (sorry for typo). So, my impression is that independently on speed (broadband) of copy&paste transfer the remote computer becomes sluggish while copying over RDP. At the same time downloading from internet doesn't make remote host sluggish. AFAIU, it is because clipboard of remote computer and so its memory becomes overloaded by transfer. How can I control (restrict) the usage of clipboard for specific process (pasting of file)? What are the possible way to control it? Update: After reading that slow speed of transfer is caused by encryption used for copy&pasting over RDP and since I believe I am more interested in overall efficiency: both the time, or rapidness, of getting file as well as possibility to work without waiting, I changed the question title from: How to control the usage of remote desktop clipboard usage for pasting a big file? to How to better copy&paste big files over RDP? For example, is it better to copy&paste one huge (zip) archive or unzip it and copy paste a folder with unzipped files? And more exactly I wanted to ask: What are possible ways to improve overall experience: the speed of transfer (i.e. availability of needed file) responsiveness of remote host (making remote coputer available for work before completion of copy&pasting)?

  Read the article

• How to tell nginx to honor backend's cache?

  - by ChocoDeveloper

  I'm using php-fpm with nginx as http server (I don't know much about reverse proxies, I just installed it and didn't touch anything), without Apache nor Varnish. I need nginx to understand and honor the http headers I send. I tried with this config (taken from the docs) but didn't work: /etc/nginx/nginx.conf: fastcgi_cache_path /var/lib/nginx/cache levels=1:2 keys_zone=website:10m inactive=10m; fastcgi_cache_key "$scheme$request_method$host$request_uri"; /etc/nginx/sites-available/website: server { fastcgi_cache website; #fastcgi_cache_valid 200 302 1h; #fastcgi_cache_valid 301 1d; #fastcgi_cache_valid any 1m; #fastcgi_cache_min_uses 1; #fastcgi_cache_use_stale error timeout invalid_header http_503; add_header X-Cache $upstream_cache_status; } I always get "MISS" and the cache dir is empty. If I uncomment the other directives, I get hit, but I don't want those "dumb" settings, I need to control them within my backend. For example, if my backend says "public, s-maxage=10", the cache should be considered stale after 10 secs. Instead, nginx will store it for 1h, because of these directives. I was thinking whether I should try proxy_cache, not sure what's the difference. In both fastcgi and proxy modules docs it says this: The cache honors backend's Cache-Control, Expires, and etc. since version 0.7.48, Cache-Control: private and no-store only since 0.7.66, though. Vary handling is not implemented. nginx version: nginx/1.1.19 Any thoughts? pd: I also have the reverse proxy that is offered by Symfony2 (which I turn off to use nginx's). The headers are interpreted correctly by it, so I think I'm doing it right.

  Read the article

• Switch between network configurations via command line in fedora 17

  - by Mike Fairhurst

  I have two different setups I use on my work laptop; one enables synergy over an ethernet ssh tunnel with my work computer on the local network, and the other opens an HTTP tunnel to my work computer from outside the network. When I have wifi enabled at work, my laptop seems to use it by preference. This makes synergy run incredibly slowly. At home I must use wifi. I have scripts that begin my ssh tunnels, add my ssh keys, and starts up other programs like synergy, and close themselves when I shut my laptop. However, every day I have to start out my routine by opening my gnome-control-center and turning on my ethernet. I have tried route add and ifup, none of it works, so I dove into gnome-control-center's source code and found that it enabled the connection by libnm's method nm_client_activate_connection with some libnm specific structs that I am having trouble tracking down. I'm not much of a c programmer, and I'm not familiar with either GTK or libnm. Does anybody know what fedora 17 does with ethernet connections to fully enable them? Or does anybody know what libnm does to fully enable an ethernet connection? Do I have to write a c script to run libnm for me to fully emulate whatever gnome-control-center is trying to do?

  Read the article

• User unable to delete folder / files "File in use by another user" Server 2003

  - by Az

  I am administering a standalone Windows 2003 Terminal Server with no domain membership. Occasionally (about once a week or so) a user will attempt to delete a sub-folder in a Shared folder and gets denied with "File in use by another user". I tried checking the shared folder snap-in and that folder is not open. She has full control and is the owner of the folder as well. I even checked in "Effective permissions" for some of the folders / files she cant delete and she truly has full control. I am able to delete the folder as Administrator with no problem. Another odd thing, she can delete the files IN the folder most of the time (this issue happens on both folders and files in the share). Sometimes merely waiting a day or two will allow her to delete the folder or files. I am curious as to why she gets the message that it is in use as creator/owner with full control yet I don't get it simply as a member of the Admin group. If anyone out there has any ideas I'd love to hear them! THANK YOU.

  Read the article

• Uploading to another domain gives HTTP code 405

  - by dragon112

  I'm trying to upload a file (which can be quite large) from the website of one server to the backend of another server using plupload. Lets say: domain 1 = http://www.websitedomain.com/uploadform domain 2 = http://www.backenddomain.com/uploadhandler Trying to upload i send the following: OPTIONS /main/uploadnetwork.php HTTP/1.1 Host: backenddomain.com Connection: keep-alive Access-Control-Request-Method: POST Origin: http://www.websitedomain.com User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Access-Control-Request-Headers: origin, content-type Accept: */* Referer: http://www.websitedomain.com/uploadform Accept-Encoding: gzip,deflate,sdch Accept-Language: nl-NL,nl;q=0.8,en-US;q=0.6,en;q=0.4 Accept-Charset: ISO-8859-1,utf-8;q=0.7,*;q=0.3 DNT: 1 But when I try to start the upload the server returns the following: HTTP/1.1 405 Method Not Allowed Allow: GET, HEAD, OPTIONS, TRACE Content-Type: text/html Server: Microsoft-IIS/7.5 X-Powered-By: ASP.NET X-Powered-By-Plesk: PleskWin Date: Mon, 01 Oct 2012 12:41:57 GMT Content-Length: 999 After doing some research I found out that a browser does this to check if the server will accept the intended message. It looks like my server doesn't feel like accepting a simple POST call even tho i use post all the time. The Google Chrome console gives the following error: XMLHttpRequest cannot load http://www.backenddomain.com/uploadhandler. Origin http://www.websitedomain.com is not allowed by Access-Control-Allow-Origin. Does anyone know how to stop the browser from checking or how i can tell my server to just accept the POST?

  Read the article

• Permissions Issue with Files Generated by PerfMon

  - by SvrGuy

  We are trying to implement some data logging to CSV files using a Data Collector Set in PerfMon (on a windows Server 2008R2 system). The issue we are running into is that we (seemingly) can't control the permissions being set on the log files created by perfmon. What we want is for the log files created by perfmon to have Everyone:F permissions (Full Control for Everyone). So, we have a directory structure setup where all logs go into a folder: c:\vms\PerfMonLogs\%MACHINENAME% (e.g. c:\vms\PerfMonLogs\EvaluationG2) In the above example, c:\vms\PerfMonLogs\EvaluationG2 has permissions Everyone:F (below is the icacls for this directory) EVALUATIONG2/ Everyone:(OI)(CI)(F) NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Performance Log Users:(OI)(R) When the data collector set runs, it creates new sub folders and files within c:\vms\PerfMonLogs\EvaluationG2, e.g. (C:\vms\PerfMonLogs\EVALUATIONG2\M11d26y2012N3) Each of these directories and files has the following permissions: M11d26y2012N3 NT AUTHORITY\SYSTEM:(OI)(CI)(F) BUILTIN\Administrators:(OI)(CI)(F) BUILTIN\Performance Log Users:(OI)(R) So these new folders and not simply inheriting permissions from the parent folder (don't know why). Now, we tried adding Everyone:F using the security tab on the collector set (No dice). Any ideas? How do we control the permissions on the log files generated by perfmon data collector set?

  Read the article

• How can I get mouse capture to work in virtualbox when I move guest window to second monitor?

  - by Dan

  I'm running VirtualBox on a Win7 host. Guest OS is Centos. My setup is a laptop (screen 1) with a huge external monitor (screen 2). I'm only telling Centos there is one monitor though. When I start up VirtualBox on screen 1, the mouse capture works fine. I don't have mouse integration because (I think) the kernel on Centos is too old to support it. That's fine, I don't mind doing the Right-Control thing. The problem I have is that when I drag the whole VM window over to my second monitor, the mouse capture doesn't work right anymore. I click inside the VM and can move the VM cursor a little bit, but I can't always get to the edges of the VM screen -- before I get all the way to an edge, the cursor will escape from the VM as if I had hit right-control. But it's still captured according to the icon, and if I then hit right-control, the guest cursor jumps to a different screen location. My workaround: if I have the VM window mostly on screen 2, but a small corner of it still on screen 1, then the mouse capture works correctly. Is there a setting to make this work better?

  Read the article

• What tools can I use to locate the IP of a machine on my network?

  - by user134918

  I am logged in to a remote Windows Server machine and am trying to attach it to a VPN for a LAN that I am also connected to locally from another Windows machine using Remotr Desktop. I can connect the remote machine to the VPN but when I do so, I lose my remote desktop connection. I am now in a situation where I know/think that the remote machine is on my LAN, but do not know what its current IP is and can therefor not connect to it again. I do not have any control over the infrastructure, all I have is a remote machine that I do control, and another machine that I also control that is connected to the same LAN as I'm trying to get the remote machine on using the existing VPN. What tools are available for Windows to allow me to locate the machine on my LAN again? I am imagining that there must be a tool that broadcasts the machines new IP using multicast, or tries to log in to a server component running somewhere with a know IP. Effectively, I am looking for some software that I can run on my remote machine, as well as my local machine, to allow me to discover the new IP address (on the LAN) assigned to the remote machine after connecting to the VPN.

  Read the article

• Confused with creating an ODBC connection, apparently I have two separate odbcad32.exe files?

  - by Hoser

  Alright, this is my first time working with this so forgive me if I'm a little confusing or vague. I have a server with Windows Server 2008 Standard without Hyper-v (6.0, Build 6002). I'm running a small website off this server and using a Microsoft Access database to store some information coming in through the website. I'm sure the PHP I have written to open the ODBC connection is correct as it has worked for me when I created this website in a testing environment on a laptop. My current issue now is that it seems like I have two different odbcad32.exe's, and one doesn't appear to have a driver for a .accdb file, and only a .mdb file. The other has a driver for both. The first one I speak of has a driver titled 'Driver do Microsoft Access (.mdb)', the second one has a driver titled 'Microsoft Access Driver (.mdb, .accdb)'. I access the first odbcad32.exe by going to C:\Windows\SysWOW64\odbcad32.exe, and then the one that seems to have the driver I need I go to Control Panel-Administrative Tools-Data Sources(ODBC) and simply create a new connection in the System DNS tab. Whenever I make changes to the one that I access through the Control Panel, I see no changes, however if I use the odbcad32.exe file in SysWOW64 I do get some changes in the errors that come back to me. The main difference I noticed is that when I set up an ODBC connection with the Control Panel method it said it simply couldn't find the ODBC connection, but when I made a .mdb connection in the SysWOW64 one (and pointed it to a .accdb file) it says Cannot open database '(unknown)'. It may not be a database that your application recognizes, or the file may be corrupt. Which makes it seem like it is this odbcad32.exe version in SySWOW64 that is being recognized as the 'correct' one. Is there any way to fix this? I've tried to be as thorough as possible but if I've been confusing or left anything out let me know.

  Read the article

• AjaxControlToolkit: HtmlEditor Textarea not showing in Chrome/Safari

  - by pagetailor

  Hi, I am using the HtmlEditor Control included in the AjaxControlToolkit (patched version v62210 because I needed some of the included fixes). Unfortunately the textarea in the Html Editor control is never displayed in Chrome and Safari (both latest version). It doesn't matter if there is text in it or not. It does work on the AjaxControlToolkit Sample page with both browsers though. Any ideas?

  Read the article

• Convert RGB Colour to OLE_Color

  - by Robert W

  I have the unenviable task of maintaining an ActiveX control that expects OLE_Colors as the back/for colour of the control. Is there a tool or a .NET code sample that will convert from an RGB colour (or a hex colour) to an OLE_Color?

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >