Search Results

Search found 10107 results on 405 pages for 'remote backups'.

Page 272/405 | < Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >

• Dynamic DNS registration for VPN clients

  - by Eric Falsken

  I've got a VPN server set up in my Active Directory on a remote network. (VPN Server is separate box from DNS/AD) When I dial into the network (client machine is not a member of the AD) the machine does not register its IP or Hostname in the DNS. I've played with all possible combinations of DHCP and RRAS-allocated IP pools, and none of them seem to cause my client to register. Is it because my client has to be a member of the domain? Are there some security settins I can tweak so that it can register its hostname/ip? I've looked in the event logs (System and Security) for the AD, DNS, DHCP, RRAS, and the client machine, and don't see anything relating to DNS Registration. Here's the IPConfig on the client machine (once connected): PPP adapter My VPN Name: Connection-specific DNS Suffix . : mydomain.local Description . . . . . . . . . . . : My VPN Name Physical Address. . . . . . . . . : DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.22(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.255 Default Gateway . . . . . . . . . : DNS Servers . . . . . . . . . . . : 192.168.1.52 <- DC1 192.168.1.53 <- DC2 NetBIOS over Tcpip. . . . . . . . : Enabled Edit: It looks like my clients are not recieving the DHCP Scoope Options. I found this great article in Microsoft's KB. So the problem here is that the VPN Server "pre-reserves" the DHCP addresses, but then you have to add the DHCP Relay Agent to relay the secondary request for scope options. My problem is that the DHCP Relay Agent isn't relaying to the local DHCP server (same box as the VPN/RRAS). I've configured the DHCP Relay Agent according to this KB, but it dosn't work for a local DHCP server. (I see the request count increasing, but no responses) I was able to get everything working by specifying the DNS server and domain name in the VPN connection properties on the client. But am still unable to assign it (or the default gateway) dynamically via DHCP. The client also has to be a member of the remote domain.

  Read the article

• Add server 2008 to 2003 domain schema upgrade failed

  - by Ken

  I'm trying to add a server 2008 r2 server to an existing 2003 domain (upgraded to 2003 functionality). I've followed the steps from microsoft which are clarified by this post: 2003 DC AD upgrade to 2008 on second server migration plan While running adprep /forestprep I lost my connection and wasn't able to resume or remote control that session, so I couldn't see the end result of the command. Rerunning adprep /forestprep indicates that the process has already been completed successfully. After finishing the rest of the steps (/domainprep ... and /gpprep, etc), the 2008 server won't join. The error message is the same "you need to run forestprep first" So the situation I'm in is that I can't rerun /forestprep, but my Registry key still reads schemaVer=30. Should I have staged forest upgrades? Any ideas how to get my schema ver to 44 at this point?

  Read the article

• Cannot access Tomcat application remotely, but can access Apache applications

  - by David Keaveny

  I am installing Atlassian's Confluence 4.2 on a clean Ubuntu 12.04 server. Confluence runs on Tomcat 6, and uses PostgreSQL 9.1 as its datastore. I've installed and configured phpPgAdmin to manage PostgreSQL, and Zentyal to manage the server generally. Both these applications use Apache. The problem that I am experiencing is that while I can access phpPgAdmin and Zentyal without problem from a remote PC, I can only access Confluence when running locally (either specified by localhost, IP address or host name). Instead I get an HTTP 502 Connection Failed error. By way of experimentation, I also installed Ajenti, which appears to use lighttpd rather than Apache or Tomcat, and it too works fine when connected to locally, but gives me the same HTTP 502 error when connected to remotely. So applications served from Apache work fine, but applications served from other services do not - does that ring a bell with anyone? It's been over 10 years since I last sysadmin'ed a Linux box, so I'm more than a little rusty!

  Read the article

• Unable to SSH into EC2 instance on Fedora 17

  - by abhishek

  I did following steps But I am not able to SSH to it(Same steps work fine on Fedora 14 image). I am getting Permission denied (publickey,gssapi-keyex,gssapi-with-mic) I created new instance using fedora 17 amazon community image(ami-2ea50247). I copied my ssh keys under /home/usertest/.ssh/ after creating a usertest I have SELINUX=disabled here is Debug info: $ ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com ssh -vvv ec2-54-243-101-41.compute-1.amazonaws.com OpenSSH_5.2p1, OpenSSL 1.0.0b-fips 16 Nov 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug2: ssh_connect: needpriv 0 debug1: Connecting to ec2-54-243-101-41.compute-1.amazonaws.com [54.243.101.41] port 22. debug1: Connection established. debug1: identity file /home/usertest/.ssh/identity type -1 debug1: identity file /home/usertest/.ssh/id_rsa type -1 debug3: Not a RSA1 key file /home/usertest/.ssh/id_dsa. debug2: key_type_from_name: unknown key type '-----BEGIN' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'Proc-Type:' debug3: key_read: missing keytype debug2: key_type_from_name: unknown key type 'DEK-Info:' debug3: key_read: missing keytype debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug3: key_read: missing whitespace debug2: key_type_from_name: unknown key type '-----END' debug3: key_read: missing keytype debug1: identity file /home/usertest/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9 debug1: match: OpenSSH_5.9 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug2: fd 3 setting O_NONBLOCK debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: none,[email protected],zlib debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,[email protected] debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5,hmac-sha1,[email protected],hmac-sha2-256,hmac-sha2-256-96,hmac-sha2-512,hmac-sha2-512-96,hmac-ripemd160,[email protected],hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: none,[email protected] debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: found hmac-md5 debug1: kex: server->client aes128-ctr hmac-md5 none debug2: mac_setup: found hmac-md5 debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug2: dh_gen_key: priv key bits set: 131/256 debug2: bits set: 506/1024 debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug3: check_host_in_hostfile: filename /home/usertest/.ssh/known_hosts debug3: check_host_in_hostfile: match line 17 debug1: Host 'ec2-54-243-101-41.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/usertest/.ssh/known_hosts:17 debug2: bits set: 500/1024 debug1: ssh_rsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/usertest/.ssh/identity ((nil)) debug2: key: /home/usertest/.ssh/id_rsa ((nil)) debug2: key: /home/usertest/.ssh/id_dsa (0x7f904b5ae260) debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic debug3: preferred gssapi-with-mic,publickey,keyboard-interactive,password debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: publickey,keyboard-interactive,password debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug3: Trying to reverse map address 54.243.101.41. debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/usertest/.ssh/identity debug3: no such identity: /home/usertest/.ssh/identity debug1: Trying private key: /home/usertest/.ssh/id_rsa debug3: no such identity: /home/usertest/.ssh/id_rsa debug1: Offering public key: /home/usertest/.ssh/id_dsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic).

  Read the article

• How to move 100mb hidden system reserved partition on Windows Server 2008 R2 to other drive?

  - by Artyom Krivokrisenko

  Hello! I have a server with two 1.5TB hard drives. I was going to install a Windows Server 2008 R2 and create software RAID1 using Windows Disk Management Utility. I instaleld Windows, open this console and that is what I see: http://i.imgur.com/KoC9a.png Setup program created a System Reserved Partition at my second HDD. I don't understand now, how can I create RAID1, because space, which supposed to be used for copy of disk C, now is used for this hidden partition. So is there any way now to create correct RAID1? May it is possible to move this partition to the Disk 0, where I have plenty of free space? Unfortunately I can't reinstall Windows and apply other options at the disk management step of the installation, because installation image is not longer connected to the server and I have no physical access to server, only remote desktop.

  Read the article

• Are there netcat-like tools for Windows which are not quarantined as malware?

  - by Matthew Murdoch

  I used to use netcat for Windows to help track down network connectivity issues. However these days my anti-virus software (Symantec - but I understand others display similar behaviour) quarantines netcat.exe as malware. Are there any alternative applications which provide at least the following functionality: can connect to an open TCP socket and send data to it which is typed on the console can open and listen on a TCP socket and print received data to the console ? I don't need the 'advanced' features (which are possibly the reason for the quarantining) such as port scanning or remote execution.

  Read the article

• OpenVPN on Android TCP retransmissions after OpenVPN server reboot

  - by anogaki

  I raised OpenVPN on server for the first time. It worked fine until the server rebooted. The firewall configuration is unchanged. When I tcpdump from tun interface on the server, I always get TCP retransmissions on all TCP packets larger than a few bytes in Android. Using a similar(read: same) configuration on my Linux box from where I'm posting this message now works just fine; no retransmissions, no loss. It did work just fine before the server rebooted. What could possibly cause this? I already tried rebooting Android, it didn't help. Client configuration, used on both Linux PC and Android tablet: dev tun client remote 192.168.0.1 persist-key persist-tun nobind pkcs12 user.p12 mssfix 1480 cipher AES-256-CBC verb 3 1480 is below the mtu of uplink connection on server which is 1492. I tried adding tun-mtu 1480 to Android but that didn't help either.

  Read the article

• How do I view the job queue in lftp after it has moved to a background process?

  - by drpfenderson

  I've just started using lftp for remote transferring files on my Raspberry Pi running Debian. I know how to transfer the files, and use queue and jobs to add and view transferring files. However, I'm not actually sure on how to view these transfers once lftp moves to the background. The lftp man page mentions how lftp is moving to the background, but when I open a new instance of the program from shell and type jobs, the queue is empty. However, I can clearly see using my file manager that the transfers are still happening, as the files are there and growing in size. I'm guessing that when I reopen lftp, it's just opening a new instance that isn't connected to the nohup mode lftp that has the active queue. I've tried searching various places, but no one else seems to have this particular issue. So, I guess what I'm asking is twofold: Is there a way to easily attach to the background lftp process to view the current jobs list? If not, is there a way to view this at all?

  Read the article

• How would I setup reverse DNS for 2 email servers?

  - by Solignis

  I have an interesting DNS question (well interesting to me atleast). I just installed an hmail server in our remote office to act as an MX backup in the event our exchange server goes down. The 2 host names are mail.campbellsurvey.com mail2.campbellsurvey.com mail points to the address 98.XXX.91.XXX mail2 points to the address 70.XXX.190.XXX How would I setup a PTR record on the ISP end to reflect both hostnames? Does the PTR have to point to EXACTLY mail.campbellsurvey.com or can it point to just campbellsurvey.com? because right now anything passing through the primary static address in our pool (the one used for standard internet) is identified as mail.campbellsurvey.com. My only idea to fix this was to move the mail server to the next available address and give it only it the name mail.campbellsurvey.com but I wanted to see if there was another way. Thanks in advance.

  Read the article

• xp vpn client dns issue

  - by David Archer

  Hi All, I have a problem with dns when connected to my work vpn. For ease of explanation I'll use the following in my outline of the problem: - name of my machine on work network is REMOTE_XP (original i know) - ip of my machine on work network is 192.168.2.80 - name of my machine on my local network is LOCAL_XP - ip of my machine on my local network is 10.0.0.3 What I want to be able to do when connected to vpn: - browse the internet from LOCAL_XP - ping by name REMOTE_XP Now it seems I've so far mentioned either 1 but not both of my wishlist. If i go to my vpn network properties (on LOCAL_XP) and uncheck the "use default dns on remote network" then I can browse the internet from my local machine but can't ping REMOTE_XP (though I can ping 192.168.2.80) If I check "use default dns..." then I can ping REMOTE_XP but can't browse the internet from LOCAL_XP. Is there a way I can have my dns cake and eat it, or will I have to accept that it will be an either/or situation? Thanks in advance.

  Read the article

• Remove CGI from IIS7

  - by jekcom

  I ran some security scan and the scan said that all kind of CGI stuff are potential thread. This is part of the result : (ash) is present in the cgi-bin directory (bash) is present in the cgi-bin directory By exploiting this vulnerability, a malicious user may be able to execute arbitrary commands on a remote system. In some cases, the hacker may be able to gain root level access to the system, in which case the hacker might be able to cause copious damage to the system, or use the system as a jumping off point to target other systems on the network for intrusion and/or denial of service attacks. and many more related to cgi-bin directory. First I searched all the server for cgi-bin folder and it did not find any. Second I'm running my website on pure .NET and I don't use any scripts like php. Question is how can I remove this CGI thing from the IIS?

  Read the article

• Allow traffic from ssl-vpn to enter ipsec tunnel on fortigate

  - by Sascha

  we configured our FortiGate 50B to route traffic from our local net 192.168.10.* (which is our office) to a remote network 172.29.112.* using an ipsec tunnel. Everything works fine as long my computer has an ip from 192.168.10.*. We can also connect to the office network from at home using a ssl vpn connection. Once connected we receive an ip from 10.41.41.*. Now I want to allow the traffic flow from 10.41.41.* to 172.29.112.* just like it does from the office network. Could somebody point me in the right direction what I would need to do? Thanks, Sascha

  Read the article

• KVM-Guests can't get past bridge - no internet connection

  - by tmn29a

  I'm running a backported KVM on a Debian Squeeze. ATM the KVM-Guest can't connect to the internet through the bridge I have set up. The guests can reach each other, the host but nothing outside. I can neither ping, nslookup or do anything to a remote address. The guest are configured to have a static IP. When I didn;t have the bridge but a virtual bridge (the KVM-default) the guest could connect fine. After setting up the bridge things broke, so I think the problem lies there. # The loopback network interface auto lo br0 iface lo inet loopback # Bonding Interface auto bond0 iface bond0 inet static address 10.XXX.XXX.84 netmask 255.255.255.192 network 10.XXX.XXX.64 gateway 10.XXX.XXX.65 slaves eth0 eth1 bond_mode active-backup bond_miimon 100 bond_downdelay 200 bond_updelay 200 iface br0 inet static bridge_ports eth0 eth1 address 172.xxx.xxx.65 broadcast 172.xxx.xxx.127 netmask 255.255.255.192 gateway 172.xxx.xxx.65 bridge_stp on bridge_maxwait 0 Thanks in advance for your help !

  Read the article

• Unable to access router even though internet works

  - by Tom Kaufmann

  I had access to my router and my internet was also working fine, but I was trying to do a port forward of 80 to my local machine and in the process I made a mistake. I went into Remote Management and for port 80 there were a few options like LAN, WAN, All. I accidently clicked "all" and then clicked "Disable". The problem is that I am no more able to access my router using 192.168.1.1, although my internet works. If I do a ping 192.168.1.1 I am able to receive the response, but I am no longer able to browse the internet. How can I fix this issue? I am using a zyxel p-660hn-t1a router given by my ISP.

  Read the article

• Oracle Installation issue on Oracle Linux 6.4

  - by Pradhyoth

  I am trying to install Oracle 11g(11.2.0.1.0) on Oracle Linux 6.4(Remote Server). I get the following error(s) when Database Configuration Assistant is running ORA-01092: ORACLE instance terminated Disconnection forced ORA-48210: Relation Not Found Can someone help me regarding this errors, I cant seem to find what exactly that I have to do to solve this issue. I have done the same install on Oracle Linux 5.7 but never faced this issue before. The only problem while installing(which happens on 5.7 too) is that the required packages fail, but upon checking, it seems much higher versions are already installed. Also I cant do a yum update because the system seems to have connectivity issues with public-yum.oracle.com as I cant ping it(even though the IP Address gets resolved)

  Read the article

• FreeNX is very unresponsive compare to VNC when using over LAN

  - by Phuong Nguyen

  I find FreeNX is quite unresponsive compare to VNC when using over LAN. I run Netbeans inside a Quad Core Server and remote desktop to it through both NX & VNC. For VNC, the screen will be nicely updated as I scroll the Netbean IDE For FreeNX, flickering happened and the mouse cursor become unresponsive as I tried to do the samething. Have anyone encountered the same? I don't like VNC because when VNC doesnot correctly understand the "Windows" key (interpreted as Super L instead of Mod) Is there any adjustment that can avoid that annoyance? I have tried both FreeNX-Server and NeatX-Server and both resulted in the same unresponsiveness.

  Read the article

• Components needed for VPN

  - by Anriëtte Combrink

  Hi there We eventually got our Mac Mini Server. We now want to set up a small Remote Access VPN using this Mac Mini Server. Firstly we are not sure of the components needed additionally to the server to setup this VPN. We currently have the following: 1 Mac Mini Server 1 Firewall Router (Billion 802.11g ADSL2+ router with VPN capabilities [it says so on the box]) 4Mbps ADSL connection (which should have VPN capability enabled by the service provider, or so we heard) We are not sure what else needs to be included to enable our small VPN. Any advice would be really helpful.

  Read the article

• HP DAT72x6 autoloader

  - by ericmayo

  Hoping someone here has seen this similar issue and can offer soem advise... I have an HP DAT72x6 auto loader tape backup unit. The external kind, here is a link to an owner's manual I found of it. http://www.dectrader.com/docs/set2/emr_na-c00070400-1.pdf I purchased the unit used about 6 months ago. The unit stopped working after 3-4 back-ups, it's used one day a month to do a monthly backup of another system. Suffice it to say the unit gets very little usage. There is an amber light on the front of the unit called the OAR (Operator Attention Required). The manual states to call for service when this light comes on and stays on. I've tried a few things to resolve but none are working. I've tried power cycling, re-securing the SCSI cables at both ends. Unit was used so I didn't pay much ($500) and so I don't want to spend a lot to have it fixed; might as well buy something new one if fixing this is going to cost more than $100-$150 bucks. I'm curious to see if anyone here has been around these devices or possibly is an HP repair person that can give me some things to try to resolve. The manual states that a solid amber OAR light indicates a hardware failure. When I power cycle the unit I see one of two scenarios so far. The unit powers up, shows self test in the LCD, then LCD changes to show all possible images and the OAR light comes on. The unit powers up, LCD is completely blank, the green lights go through some sort of process of going on and off and later the amber OAR light comes on and stays on. If it's a simple misalignment issue, I may be able to fix myself but not knowing what could cause the OAR light to come on gives me no where to even start. Google around gave no help either. I hoping someone here has experience with this and can help or point me in the right direction. Also, I don't have the HP Diagnostic tools mentioned in many manuals. The unit is connected to a Linux box. The 3-4 backups I've done with it so far have had no issues. We run amanda backup. Before this incident the unit was backing up and reading tapes fine. Thanks for any help or suggestions.

  Read the article

• NX Client running on OS X 10.6.3 => NX Server Ubuntu 10.04: weird keymapping issue

  - by Mike D

  I have been using Ubuntu 9.10 at work after switching from vista. After being (expectedly) disappointed with performance over VNC (via VPN) when logging in from home, I came across the NOMACHINE suite. Last week, I upgraded from OS X 10.6.2 = 10.6.3 at home. After that, I also updated my NX Client at home to the latest version, as there were issues with recent changes in the OSX X11 setup that rendered the NX connection useless. At that point, everything worked fine. Fast forward, I upgraded from 9.10 = 10.04 on my work machine the next day, and after coming home and trying to log-in remotely, I noticed that the "s" and "m" keys, when pressed locally, acted as if the meta key was being pressed on the remote machine. That is, the "s" key opens in the Ubuntu login menu (the power icon), and the "m" key opens the messaging menu. I found some info on using xmodmap to remap keys, however, I can't even begin to fathom what keys I could remap to solve this issue. Any ideas?

  Read the article

• Copying files SSH vs sFTP

  - by jackquack

  I'm a bit of a unix noob, but this question seems super basic, yet I can't find an answer anywhere. Basically, to my knowledge, sFTP is just FTP over ssh. So, why can't I drag and drop files from one folder to another on the server side like I can on ssh. Why when I want to unzip a .tar in a server folder, does it first want to copy it to my machine and then back? Why can't it just unzip like it can when I'm using the command line. I know that when I use the command line it is using the resources of the remote machine, but why can't sFTP do that too? Is there a way to execute commands which I would normally do over SSH, but in a gui? I'm tried mapping to the drive to my own machine, I've tried so many sFTP clients that it's silly. Is there another class of program that I just don't know of?

  Read the article

• Running multiple services on Port 443, Tunnel SSH over HTTPS

  - by lajuette

  Situation: I want to tunnel SSH sessions through HTTPS. I have a very restrictive firewall/proxy which only allows HTTP, FTP and HTTPS traffic. What works: Setting up a tunnel through the proxy to a remote linux box that has a sshd listening at port 443 The problem: I have to have a web server (lighty) running at port 443. HTTPS traffic to other ports is forbidden by the proxy. Ideas so far: Set up a virtual host and proxy all incoming requests to localhost: (e.g. 22) $HTTP["host"] == "tunnel.mylinux.box" { proxy.server = ( "" => (("host" => "127.0.0.1", "port" => 22)) ) } Unfortunately this won't work. Am i doing something wrong, or is there a reason, that this won't work?

  Read the article

• Windows Server 2008 Standard vs. Web

  - by Andreas

  I'm currently comparing Windows Server 2008 versions to see what to use. What i found is this, that might affect me: RAM: 32GB. (the same) Sockets: 4 (the same) Remote Desktop: 2 (the same) IIS: true (the same) Application Server: Only standard. I will run my server as a single CPU (4 core) 8GB RAM, 2x raid1 web-server running: IIS Asp.net .Net 4 Third part mail server. (Only for sending mail from my web-application) SQL Server Express (My data is not more then 10 GB) Some minor applications for import and export of data. I might use external load balancer if I install a second machine in the future. My question is if you see any reason for me to go for standard that is 4 x price compared to web. BR Andreas

  Read the article

• How to add authentication to ssh dynamic port forwarding?

  - by Aalex Gabi

  I am using ssh as a SOCKS server by running this command on the server: ssh -f2qTnND *:1080 root@localhost There is one problem: anybody can connect to the server and use it's internet connection. Options: To use iptables to filter access to the server, but I connect to the server from various non-statically allocated IP addresses so I would have to edit very frequently those filters which can be annoying. To install a SOCKS server on the remote. Ultimately this is the last option if there is no other simpler way to do it. (I am very lazy) Launching the same command on clients machines. The problem here is that some clients don't run on Linux and it is awkward to set up the tunnel (Windows + Putty). Is there a way to add authentication to a SOCKS server made using ssh? Bonus question: How to add encryption between the client and the server (made using ssh)?

  Read the article

• VSFTPD Unable to set write permissions on folder

  - by Frank Astin

  I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

  Read the article

• Microsoft ISA 2006 Log Extraction Issues

  - by Johandk

  Hi, We have a client running ISA2006 with logs going to MSDE. The MSDE database gets rotated. We have NO control over the client infrastructure. We need to get the logs out to a TEXT file on the server itself which will be forwarded to a remote server by other software we already have in place. My first thought was doing it via Stored Procs. Another option is vbscript? The actual table holding the logs has no primary key or other identifier so I think the dump should be done once a day for the previous day, but ideally it should run several times a day. Any ideas?

  Read the article

< Previous Page | 268 269 270 271 272 273 274 275 276 277 278 279  | Next Page >