Search Results

Search found 8472 results on 339 pages for 'boot'.

Page 273/339 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• Laptop won't load an OS or even an OS setup.

  - by Talasan Nicholson

  My fiancé's laptop started to crash and would get BSOD errors to the point that she couldn't even boot up because it would either take forever or just crash. So I figured I'd try to reformat, as it's done this before and this was the solution last time. On Windows 7, it will not go passed the "Setup is starting..." screen. On Windows XP, it crashes once the setup is about to start (BSOD). I shut it down and let it sit for 5+ hours, in case it was overheating, but it's doing the same thing anyway. By now, I figure it's something to do with the hardware but I hope not. Any ideas?

  Read the article

• Recover Bios HP DV9700T windows 7 64

  - by petebob796

  I downloaded the latest DV9700t bios (.59) and ran the update tool in windows 7 64. This seemed to go ok and did the usual system will shutdown in 10 seconds dialog. Updon the reboot nothing happens I get no BIOS screen or anything so I think the bios update went wrong. Which I am annoyed about I have never known a bios update to fail before and lots of people on the internet seem to have had the same problem with the same model. There is a way to recover apparently using crisdisk utility and creating a bootable usb key then holding win+b at power on, unfortunately the utility to make the disk doesn't seem to work in 64 bit versions of windows, the only type I have easy access to. Anyone know a way to create the boot disk in 64?

  Read the article

• Backup of whole harddrive during full operation with Acronis True Image Home 2010

  - by testing

  Currently I'm creating a backup of one of my hard drives. It's my main hard drive, where the operating system is running on. Because the backup is done during full operation I'm asking me if the backup really includes all files (registry, ...). Can I restore the backup on another hard drive and then run the operating system again without problems? Normally I would say that you have to boot from a CD (without running OS) to make a backup. I made a Google research but I didn't found my case so far.

  Read the article

• How computers display raw, low-level text and graphics

  - by panic

  My ever-growing interest in computers is making me ask deeper questions, that we don't seem to have to ask anymore. Our computers, at boot, as far as I understand it, are in text mode, in which a character can be displayed using the software interrupt 0x10 when AH=0x0e. We've all seen the famous booting font that always looks the same, regardless of what computer is booting. So, how on earth do computers output graphics at the lowest level, say, below the OS? And also, surely graphics aren't outputted a pixel at a time using software interrupts, as that sounds very slow? Is there a standard that defines basic outputting of vertices, polygons, fonts, etc. (below OpenGL for example, which OpenGL might use)? What makes me ask is why OS' can often be fine without official drivers installed; how do they do that? Apologies if my assumptions are incorrect. I would be very grateful for elaboration on these topics!

  Read the article

• Wireless performance on Ubuntu 9.10

  - by Brian

  Is there something I should do to my networking configuration in Ubuntu to better the performance of my wireless connection? I'm on a netbook dual-booting Windows 7 and Ubuntu 9.10. I pick up much stronger wifi signal when in Windows than Ubuntu. As soon as I boot Ubuntu, it will connect to the network with a stronger signal, and then loses signal very quickly. After it dies, I can't reconnect. I've tested this on a couple of different networks with the same outcome.

  Read the article

• VMWare Player Run as Service

  - by Marshal

  I have a VMWare Player running a VM at all times. However I want the server to run that Virtual Machine on boot (without logging in). This will allow me basically to restart the Server and when it loads to the login screen it's already running VMWare. Any ideas? I have tried reading up on it however websites suggest VMWare Server. This is no longer backed by VMWare anymore. So I am looking to either make VMWare Player a service or if anyone else has any other ideas? Running Win 7 on my server btw Thanks for looking.

  Read the article

• How can I retrieve a MS SQL Express Database from a non-booting computer?

  - by Redandwhite

  A client has a very important database that has not been backed up in 6 months. The PC has promptly failed. The Windows directory is corrupt, and the computer will not boot. It had a Microsoft SQL Server Express 2005 database on it. I have access to the hard drive by booting in with an Ubuntu Live CD, but I am not sure if I can find the database. I am not sure what I am looking for, or where to look either. The dead machine had Windows XP on it.

  Read the article

• Computer powers off then tries to start up but resets repeatedly.

  - by Sam Holder

  My machine has started shutting itself off after a few minutes on, everything goes off. A few seconds (3-5) after everything has stopped the lights come back on, the cpu fan and gfx card come on again. They spin for a second, then everything goes off again. A few seconds later same things happens again, light come back on, fans spin for a few seconds then go off. This repeats seemingly forever. If I leave it for a while I can power the machine back on for a while and it will boot again. It will then stay on for a little while again before power off. Rinse and repeat. Is this likely to be power supply or something else? The machine has been up and running for a couple of years before this.

  Read the article

• Change Apache DocumentDirectory path in trueCrypt partition

  - by Alan C

  Hello, I'm recently moving from windows to linux, so I've setup my machine to dual boot Windows7 and Ubuntu 10.04. I was able to successfully setup Apache on the Ubuntu partition, but I need to move the DocumentRoot since my websites are on a TrueCrypt partition that is in another hard drive so I can have them accessible in both OS. I followed some guides on how to change the path for the DocumentRoot so I end up modifiying the default file at /etc/apache2/sites-available DocumentRoot /media/truecrypt1/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /media/truecrypt1/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> Those are the lines that I've changed, but now when I go to localhost I always get the Forbidden You don't have permission to access / on this server. Apache/2.2.14 (Ubuntu) Server at localhost Port 80

  Read the article

• Headphones stopped working in Windows (working fine in other OS)

  - by arnab321

  All of a sudden, my headphones stopped working with windows 8 in my laptop. Sound plays fine through built in speakers. Its not a problem with the hardware, because, I dual boot ubuntu and sound plays fine in Ubuntu. These are the things I have tried: - Restarting and blah blah. Restarted 20 times i think, alternating windows and ubuntu. - Uninstalled and reinstalled Realtek drivers. - Troubleshooting from control panel (it says "coudnt identify problem") What might be the problem?

  Read the article

• Virtualbox, merging snapshots and base disk

  - by Henrik

  Hi, I have a virtual machine with about 30 snapshots in branches. The current development path is 22 snapshots plus the base disk. The amount of files is seemingly having an impact now on IO and the dev laptop I'm using (don't know if it is host disk performance issues with the 140GB total size over a lot of fragments, or just the fact that it is hitting sectors distributed across a lot of files). I would like to merge the current development branch of snapshots together with the base disk, but I am unsure if the following command would produce the correct outcome. I am not able to boot this disk after the procedure completes (5-6 hours). vboxmanage clonehd "C:\VPC-Storage\.VirtualBox\Machines\CRM\Snapshots\{245b27ac-e658-470a-b978-8e62137c33b1}.vhd" "E:\crm-20100624.vhd" --format VHD --type normal Could anyone confirm if this is the correct approach or not?

  Read the article

• Windows XP computer reboots at start

  - by Jonas

  I have trouble with a Windows XP computer. After Windows is started and I can see the desktop background (sometimes I can use the system a few seconds), then the system is rebooted before I can do anything. I have used a Windows XP CD and runned chkdsk /r from the repair console. But it didn't help. I have also tried booting in "safe mode" but it didn't help. The C:\Windows\Minidump directory is empty. What can I do to solve this? UPDATE: I have now placed the harddrive in another computer and I have access to all data. Except from copying all data, is there anything I can make with the system so I can boot from the harddrive again? Is it "safe" to install windows on the same disk and directory - so I can access the data but not run the applications?

  Read the article

• kvm process has too large a memory footprint on host

  - by gucki

  I'm using latest ubuntu quantal and start a kvm guest which should have 2048 MB of memory. Now after a few hours I can see that the kvm process of this guest is around 2700 MB, so 700 MB more than the guest should be able to consume. I mean a small overhead like 1% would be ok, but not 30%?! root 8631 74.0 22.2 4767484 2752336 ? Sl Nov07 512:58 kvm -cpu kvm64 -smp sockets=1,cores=2 -cpu kvm64 -m 2048 -device virtio-blk-pci,drive=drive-virtio0,id=virtio0,bus=pci.0,addr=0xa,bootindex=100 -drive file=rbd:data/vm-disk-1,if=none,id=drive-virtio0,cache=writeback,aio=native -device virtio-net-pci,netdev=net0,bus=pci.0,addr=0x12,id=net0,mac=02:7a:86:e6:1a:6c,bootindex=200 -netdev type=tap,id=net0,vhost=on -usbdevice tablet -nodefaults -enable-kvm -daemonize -boot menu=on -vga cirrus root 8694 0.0 0.0 0 0 ? S Nov07 0:00 [kvm-pit/8631] How is this possible and how to prevent it?

  Read the article

• Auto-scaling EC2 Servers and Updating Code

  - by jstats

  We've come to the point where we need to set up autoscaling for our web server and I'm unsure how to go about the process of scaling servers and updating the the existing code without remaking a new AMI and changing the autoscale config to use it. I've read a bit about people bundling the new code and uploading it to s3 and having new servers grab the bundle on boot up but that doesn't seem all that pleasant either. Currently the web app's files live in a git repo, and when we update the code, we push it to github, ssh into the web app and run a hook to bring down the latest code. So I was thinking that another option could be to just run that hook on an hourly or daily cron task. Unfortunately that doesn't cover everything type of update (for example new blog posts' images and such which aren't included in the git repo) but it's something. Could anyone provide some advice on what a common solution is or anything as to why my proposed solution is a bad idea? Thanks all

  Read the article

• T60 Screen/LCD gets black after some minutes with a highpitched sound rising and fading

  - by edelwater

  Just now my T60 screen got "black" (so no display). On my second monitor: no problems so the VGA output works. Symptom: Screen blanks / no display, but it works on the second monitor Steps to reproduce: - boot - wait (it does not matter what you do you do not have to login or anything) - (now the monitor of the laptop slowly begins to make a ssssssssHHHHHHHHHHHHHHHHHWOEOEssssssss noise of about 10 seconds) - right after the sounds ends, the monitor gets black. Sometimes it seems to be the same each time. Software: Installed no new software before/after, running ZoneAlarm and antivirus. Other: It does not feel hot in any place, there don't seem to be running processes with strange behaviour. Warranty: Out of warranty What was I doing: Typing text on a website and doing some PHP coding in a text editor. What can I do here other than buy a new laptop? Does it sound familiar to known cases? Update 1: Exactly the same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-Screen-Blackout/m-p/288772 and the second poster (garyj), http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/Black-Screen-on-T60/m-p/235053#M48627 And here: "I have that same problem. I replaced the CCRL on mine and it works fine when the screen is not screwed in. Once the frame of the LCD screen (metal portion) touches the metal on the laptop which holds the screen the screen goes black. If the metal is touching the screen when you boot up it boots up with it being very dimmly lit. " from http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-screen-problems/m-p/205047#M44995 (it seems replacing the LCD display is no use, he tried it three times). Same problem: http://forums.lenovo.com/t5/T61-and-prior-T-series-ThinkPad/T60-black-screen/m-p/80604#M25914 Hmmm... not handy 3 or 4 months ago I ordered and installed a new fan. Now the LCD. Which does not seem the core issue but some electric issue so it seems replacing the LCD is not the thing to do here. If it is not the LCD that needs to be replaced (see other threads), which parts can I order to fix this? Is there any information which could lead me to identify the issue? I have read replacing the "inverter" AND the "backlightning" would that make sense? Update 2: I replaced the inverter with another inverter, but IO have the same problem. I DID notice that the inverter is the component that makes the sssssssssssssHHHHHHHHHH sound AND it becomes very hot in a few seconds. (So both the old and the test one) The problem is hmmm wat is then the thing that makes the inverter hot by (assumption) after which it shuts itself down. Is it either the input or the output? The output seems to me not, because the screen seems to function so it must be the electricity coming in. But what causes it to become so hot would it be the VGA card outputting some unusual high voltage seems unlikely? I am looking for the component to order / replace update 3: Great news. Ewendish gave me the hint to look in the BIOS. While I was in the BIOS I noticed that the screen did not switch off and there was not a high pitched sound. So I lowered some settings in the BIOS. I then noticed that with brightness turned to 0 (via FN End), it does not make a high pitched sound and does not turn off, with brightness turned up just three "stripes" it starts making the sound. So I could from now on work under lowest brightness modus or... see where the problem lies. So as stated below with either power management or display drivers / ATI Catalyst settings / Windows display settings. I'm trying to see where it lies, but I will google some first. Update 4: I wiped clean the Windows XP installation and installed Windows 7 on it. Unfortunately the problem remains: as soon as the brightness goes up the screen starts hissing. This means... back to original thought: it probably IS a hardware problem. Although ... again... if it is NOT the inverter, what is it? Could it be the backlightning component? I could try to switch that with a another T60... but this is quite tricky.

  Read the article

• Small footprint on a Laptop

  - by sqldebacle

  I am trying to find a solution where I can do the following: 1) Run a small footprint on my laptop 2) Run virtual instances of OS w/ no primary OS installed. All the OS that I will ever use will be all virtualized. I tried playing around with the VMware Esxi, and got it to boot it from the flash drive, etc. But this just runs the server. I cannot actually run my virtual instances from there. Anyone has done this? Something similar implemented with VMWare products without needing 2 computers will be great. Thanks, -Subhash

  Read the article

• How to enable systemd instantiated service with puppet?

  - by Richard Pena

  I've got the following puppet service: service { "[email protected]": provider => systemd, ensure => running, enable => true, } When I try to apply this configuration on my client, it throws the following error: err: /Stage[main]//Node[puppetclient]/Service[[email protected]]/enable: change from false to true failed: Could not enable [email protected]: The service is running fine and I can make sure it's started on system boot by adding a symlink to getty.target.wants: ln -s /lib/systemd/system/[email protected] /etc/systemd/system/getty.target.wants/[email protected] Of source, I could go ahead and remove "enable = true" from the service definition and include a the symlink manually in the puppet configuration, but shouldn't puppet take care of this? Am I doing something terribly wrong?

  Read the article

• Dell Inspiron 1501 battery no longer "recognized"

  - by mwalling

  My parents were on vacation last weekend and franticly called me saying that they couldn't get their Inspiron 1501 to boot anymore without the BIOS whining about the battery. Before this happened, they said the "battery went dead with negligible pre-warning". On bootup, the computer says: WARNING: The battery cannot be identified. This system will be unable to charge this battery. With options to enter the BIOS or continue booting. I got to look at the machine last night. The battery still holds a charge, and will recharge. Windows detects it as a DellPY9617 battery manufactured by "DynaPack". I didn't get the BIOS revision, but the machine's ship date was 7/21/2007. The recommendations I could find on the internet varied from "discharge the battery completely" to "your computer is too old" to "update the BIOS", and wanted a more specific answer before doing something drastic.

  Read the article

• Cannot read/write a second drive in MBP 13

  - by Carlos

  I changed my original HDD for a SDD earlier this year and I just got one more SSD for my MBP 13 (2012) that I used to replace DVD drive. I'm using Mountain Lion. The SSD looks to be recognized allright, but I can't format it. Then I removed the main drive and tried the new one as the main drive and did the boot using a USB drive with MAC OS and everyhing worked as it should (like I just had one drive). However when I bring the first drive back together with the second they both show up but I can't use it. Seems like I have no permission, but when I look at it's properties it says I can read and write to it. Any ideas? Thanks a lot!

  Read the article

• I set a frequency too high for my monitor. How can I get it back to normal?

  - by ChristianM

  I have a Geforce 8500GT on my PC, and I made the stupid mistake of setting it to a higher frequency than my monitor can manage. It boots up and it shows me this… and that's all. I can't do anything. The thing is that I think this video board is a little broken anyway, because when it boots up i can't see anything until Windows starts loading. But it worked fine after, no problems. I'm on my on-board video board now, and I don't know how to set the frequency back, because when I boot up with the on-board one, it says something like "changing freq" and it goes ok. How can I get the frequency back for the 8500Gt?

  Read the article

• Why are my log in times taking so long in Linux?

  - by Jamie

  In recent weeks, login times on my Ubuntu server have started timing out; both through SSH and the local command line console. Examination of the /var/auth.log yields nothing interesting. How can I diagnose long log in times on my Ubuntu server? I should mention, also, that no updates have been performed since the problem has started, and that the /, /boot/ and /usr/ file systems are mounted as readonly. [Edit] This is a stand alone machine, so it doesn't authenticate with Active Directory, LDAP etc. Also, the login prompt is responsive, as is the password prompt. Upon typing the password then CR, I'll timeout. After four a five tries, I will be able to login, although I'm worried this will start taking longer.

  Read the article

• Blinking motherboard power LED

  - by Corey D

  I was just rebuilding an old desktop PC to be used as a HTPC and the LED on the motherboard that indicates when there is power is blinking fairly rapidly. The only way I can get the machine to boot is to press the power button immediately after plugging it in, and even then I cannot make it into the BIOS. The power supply has more than enough juice to power all of the components, and is from a reputable manufacturer. The motherboard is an Asus and is about 4.5 years old. Is my power supply hosed? Or is it my motherboard?

  Read the article

• How to login without entering username and password

  - by torbengb

  I'm a newbie running Ubuntu 9.10. I have two users (wife and me), and each user's screensaver is set to lock so that on wakeup, we get to choose which user's desktop to go to. However, Ubuntu requires a password, so this is pretty tedious. I'd like to switch users without entering any password. I know about this trick that works for the boot login, but it doesn't deal with multiple users. Is it possible to set empty passwords for users in Ubuntu, or skip the password in other ways? (I'm expecting real Linux users to suggest that passwordless users must not get any rights and there be an admin user with a strong password. Yes, you're right. But that's not what this question is about. Thanks.)

  Read the article

• Can a power loss break an hard disk?

  - by dag729

  Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

  Read the article

• Change default code page of Windows console to UTF-8

  - by Regent

  Currently I'm running Windows 7 x64 and usually I want all console tools to work with UTF-8 rather than with default code page 850. Running chcp 65001 in the command prompt prior to use of any tools helps but is there any way to set is as default code page? Update: Changing HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Nls\CodePage\OEMCP value to 65001 appear to make the system unable to boot in my case. Proposed change of HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\Autorun to @chcp 65001>nul served just well for my purpose. (thanks to Ole_Brun)

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >