Search Results

Search found 9608 results on 385 pages for 'flash drives'.

Page 273/385 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

  • Two SATA HDDs connected using a Black Duet HDD Docking Station via eSATA to my Laptop, second drive

    - by leeand00
    Hi I am using a BlacX Duet HDD Docking Station to connect a 1TB WD Caviar Black SATA HDD (WD10000LSRTL) and a HITACHI SATA DESKSTAR (0S00163) to my G51VX (BestBuy) laptop via the eSATA port. When I plug in both HDDs in to the Docking Station, connect the docking station to my laptop and start Windows 7 (64-bit Ultimate), only the HDD in the first drive in the port actually shows up in My Computer and Disk Management. If I swap the drives positions I can get them both to work, but never at the same time. I also checked in the bios settings on the laptop, under Advanced-IDE Configuration-SATA Operation Mode, and it displays: SATA Operation Mode: [Enhanced] AHCI Port0 [Hard Disk] Device: Hard Disk Vendor: ST9320421AS LBA Mode: Supported S.M.A.R.T.: Supported AHCI Port5 [Hard Disk] Device: Hard Disk Vendor: Hitachi HDS721010CLA332 Size: 100.00 GB LBA Mode: Supported S.M.A.R.T.: Supported There should be a third drive, but I'm not certain why it is not being picked up. Additionally, before I played around with the settings in the IDE configuration, it used to display the DVD as well.

    Read the article

  • NetApp and SQL Server?

    - by Edinor
    Do you have any good or bad experiences to share running SQL Server OLTP Systems on NetApp appliances? I have been working with a small, relatively low-volume cluster with a lower-end NetApp device, and I have found the environment to be generally unstable, at least compared to my experiences with other SANs, iSCSI arrays, and DAS setups. I struggle to believe that RAID DP and WAFL are more than fairy-dust technologies. A solution has been proposed to me that I just need a bigger, better NetApp, with PAM cards and other cool technology I've not heard of, and I feel like I would be better off spending a quarter of that on good direct-attached drives and a beefy server. At the same time, I feel that an Enterprise-class SAN should be something I can count on to be consistently a more stable, better performer than the less expensive solution I might propose. Are you a SQL Server DBA in an OLTP environment and love your NetApp? If you don't like them, why not?

    Read the article

  • How to fix an SSD

    - by anonymous
    I have a Samsung 128 go SSD : MZ5PA128HMCD-01000. When I'm using it : there is always I/O errors. I tried to secure-erase it. But it is impossible to create a new NTFS (or any filesystem...) partition because I still get I/O errors. I tought maybe upgrading the firmware will solve the problem. Unfortunately, I'm not able to upgrade the firmware with Samsung SSD Magician Tool ... because Magician says there is no Samsung SSD on my computer... Is there a way to make Magician recognize this Samsung MZ5PA128HMCD-01000 SSD? Is another tool available to flash any firmware on a SSD? What should I do to fix this SSD?

    Read the article

  • Windows 7 won't recognize backup set can I script extracting the files in some other way?

    - by datatoo
    The Windows 7 Backup/Restore created multiple backup sets and I was able to restore the oldest version, but not the most recent, which is not seen by the application. I do see all of the zip files and there are hundreds in later versions. Is there a way to extract each of these correctly outside of the regular restoration method? Perhaps scripting an extract of each day one after another? further clarifying The backup files were all made to an external drive. The original computer died completely, power supply, drives everything. I am trying to reconstruct as much as possible and the only backup set recognized is 6 months older. This was recovered over a new install, but unzipping thousands of zip files is not really a simple unzip copy project as the original paths are not a simple thing to reconstruct.

    Read the article

  • FusionCharts Sharepoint And dataUrl param.

    - by oivoodoo
    Hi, everyone. I have problem with fusioncharts evaluation in the ASP .NET(Sharepoint Portal). I am customizing survey list for providing new view. I added to scheme.xml the next code. <View BaseViewID="4" Type="HTML" WebPartZoneID="Main" DefaultView="TRUE" DisplayName="Charts" SetupPath="pages\viewpage.aspx" ImageUrl="/_layouts/images/survey.png" Url="overview.aspx" FreeForm="TRUE" ReadOnly="TRUE"> <!-- _locID@DisplayName="camlidV1" _locComment=" " --> <Toolbar Type="Standard" /> <ViewFields> </ViewFields> <ViewEmpty> <SetVar Name="HandlerUrl">/_layouts/IEFS/SurveyHandler.aspx</SetVar> <HTML> <![CDATA[ <!-- START Code Block for Chart 'ChartName' --> <object classid="clsid:d27cdb6e-ae6d-11cf-96b8-444553540000" codebase="http://fpdownload.macromedia.com/pub/shockwave/cabs/flash/swflash.cab#version=8,0,0,0" width="350" height="350" name="SurveyChart"> <param name="allowScriptAccess" value="always" /> <param name="movie" value="/_layouts/IEFS/FusionCharts/MSCombi3D.swf"/> <param name="FlashVars" value="&chartWidth=350&chartHeight=350&debugMode=1&dataURL=]]> </HTML> <GetVar Name="HandlerUrl" /> <HTML> <![CDATA["/>]]> </HTML> <HTML> <![CDATA[ <param name="quality" value="high" /> <embed src="/_layouts/IEFS/FusionCharts/MSCombi3D.swf" FlashVars="&chartWidth=350&chartHeight=350&debugMode=1&dataURL=]]> </HTML> <GetVar Name="HandlerUrl" /> <HTML> <![CDATA[" quality="high" width="350" height="350" name="ChartName" allowScriptAccess="always" type="application/x-shockwave-flash" pluginspage="http://www.macromedia.com/go/getflashplayer" /> </object> <!-- END Code Block for Chart 'ChartName' --> ]]> </HTML> </ViewEmpty> As you can see I've just create standard object tag of fusioncharts control(I got it from examples). But when page is rendered I can see the next following error: And I have error: INFO: XML Data provided using dataURL method. dataURL provided: ./_layouts/IEFS/SurveyHandler.aspx dataURL invoked: ./_layouts/IEFS/SurveyHandler.aspx?FCTime=223 ERROR: An error occurred while loading data. Please check your dataURL, by clicking on the "dataURL invoked" link above, to see if it's returing valid XML data. Common causes for error are: No URL Encoding provided for querystrings in dataURL. If your dataURL contains querystrings as parameters, you'll need to URL Encode the same. e.g., Data.asp?id=101&subId=242 should be Data%2Easp%3Fid%3D101%26subId%3D242 Different sub-domain of chart .swf and dataURL. Both need to be same owing to sandbox security. Network error My data-page(handler) is rendered valid xml data. I read this link http://www.fusioncharts.com/docs?/Debug/Basic.html, but it doesn't help me. Have ever you seen same error before? With The Best Regards, Alexander.

    Read the article

  • Missing audio and problems playing FLV video converted from 720p .mov file with FFMPEG

    - by undefined
    I have some .mov video files recorded from a JVC GC-FM1 HD video camera in 720p mode. I have FFMPEG running on a Linux box that I upload files to and have them encoded into FLV format. The video appears to be encoding ok but there is no audio in the resulting FLV file and when I play it back in Flash Player in a browser or on Adobe Media Player, the video pauses at the start. It appears that Adobe Media Player waits for the progress bar to reach the end of the video before starting the playback - i.e. the video will load, the picture pauses, the progress bar seeks to the end as if the video was playing then when it reaches the end the video picture starts. There is no audio on the video. I am noticing this in the video player I have built with Flash 8 using an FLVPlayback component and attached seekBar. The seek bar will start moving as if the video is playing but the picture remains paused. Here are some outputs from my FFMPEG log and the command I am using to encode the video - my FFMPEG command called from PHP - $cmd = 'ffmpeg -i ' . $sourcelocation.$filename.".".$fileext . ' -ab 96k -b 700k -ar 44100 -s ' . $target['width'] . 'x' . $target['height'] . ' -ac 1 -acodec libfaac ' . $destlocation.$filename.$ext_trans .' 2>&1'; and here is the output from my error log - FFmpeg version UNKNOWN, Copyright (c) 2000-2010 Fabrice Bellard, et al. built on Jan 22 2010 11:31:03 with gcc 4.1.2 20070925 (Red Hat 4.1.2-33) configuration: --prefix=/usr --enable-static --enable-shared --enable-gpl --enable-nonfree --enable-postproc --enable-avfilter --enable-avfilter-lavf --enable-libfaac --enable-libfaad --enable-libfaadbin --enable-libgsm --enable-libmp3lame --enable-libvorbis --enable-libx264 libavutil 50. 7. 0 / 50. 7. 0 libavcodec 52.48. 0 / 52.48. 0 libavformat 52.47. 0 / 52.47. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.17. 0 / 1.17. 0 libswscale 0. 9. 0 / 0. 9. 0 libpostproc 51. 2. 0 / 51. 2. 0 Seems stream 0 codec frame rate differs from container frame rate: 119.88 (120000/1001) -> 59.94 (60000/1001) Input #0, mov,mp4,m4a,3gp,3g2,mj2, from 'uploads/video/60974_v1.mov': Metadata: major_brand : qt minor_version : 0 compatible_brands: qt comment : JVC GC-FM1 comment-eng : JVC GC-FM1 Duration: 00:00:30.41, start: 0.000000, bitrate: 4158 kb/s Stream #0.0(eng): Video: h264, yuv420p, 640x480 [PAR 1:1 DAR 4:3], 4017 kb/s, 59.94 fps, 59.94 tbr, 90k tbn, 119.88 tbc Stream #0.1(eng): Audio: aac, 48000 Hz, stereo, s16, 128 kb/s Output #0, rawvideo, to 'uploads/video/60974_v1.jpg': Stream #0.0(eng): Video: mjpeg, yuvj420p, 320x240 [PAR 1:1 DAR 4:3], q=2-31, 200 kb/s, 90k tbn, 59.94 tbc Stream mapping: Stream #0.0 -> #0.0 Press [q] to stop encoding [h264 @ 0x8e67930]B picture before any references, skipping [h264 @ 0x8e67930]decode_slice_header error [h264 @ 0x8e67930]no frame! Error while decoding stream #0.0 [h264 @ 0x8e67930]B picture before any references, skipping [h264 @ 0x8e67930]decode_slice_header error [h264 @ 0x8e67930]no frame! Error while decoding stream #0.0 frame= 1 fps= 0 q=3.8 Lsize= 15kB time=0.02 bitrate=7271.4kbits/s dup=482 drop=0 video:15kB audio:0kB global headers:0kB muxing overhead 0.000000% Which are the important errors here - B picture before any references, skipping? decode_slice_header error? no frame? or Seems stream 0 codec frame rate differs from container frame rate: 119.88 (120000/1001) - 59.94 (60000/1001) Any advice welcome, thanks

    Read the article

  • How to understand the LSI HBA connector specs?

    - by Sandra
    When reading the specifications for the LSi SAS 9206-16e HBA, it says Storage Connectivity; Data Transfer Rates * 16 ports; 6Gb/s SAS 2.1 compliant SAS Bandwidth * Half Duplex 2400MB/s, x4, 6Gb/s SAS lanes Port Configurations * 16 ea, x1 ports (individual drives) * 4 ea, x4 wide ports * 2ea, x8 wide ports Connectors * Four (x4) mini-SAS HD external connectors (SFF8644) So there are 4 physical connectors. Question What is the bandwidth for each of the connectors? I would be temped to say 6Gb/s * 4, but then it mentions the "Port Configurations" and 2ea, 4ea, 16ea, which I don't understand what is. Does this mean, that the 4 physical connectors are not identical?

    Read the article

  • Apache port forwarding with ZTE ZXV10 W300 router (provider specific firmware)

    - by dannote
    I'm trying to configure port forwarding for Apache 2.2 installed on Windows XP SP3 with ZTE ZXV10 W300 router. The computer has a static IP 192.168.1.2. Port forwarding is configured as following: Enable true Name Apache Protocol TCP (also tried TCP and UPD) WAN Host Start IP Address empty WAN Host End IP Address empty WAN Connection stream WAN Start Port 8080 WAN End Port 8080 LAN Host IP Address 192.168.1.2 LAN Host Start Port 8080 LAN Host End Port 8080 Port 8080 is open for both TCP and UPD in Windows Brandmauer. Apache configuration: Listen 192.168.1.2:8080 Router Firmware: Hardware Version V1.0.01 Software Version V8.0.02T03_CFA Boot Loader Version V1.1.2 The provider is COMSTAR. I'm not sure but it's said they flash routers with modified firmware. I have also tried to set up Bitcomet port forwarding on port 13514 and failed.

    Read the article

  • How to remove raid 5 array of 5 SAS and use only use one SAS at a time without writing any thing to disc for recovery

    - by murtaza hamid
    I have HP server ML370 g5 with 8 SAS, c drive 1 72 gb raid 0, d drive 2 72 gb raid 0, f drive 5 146 gb raid 5. 2 of 5 sas drive has got bad sectors and raid 5 is showing status failed. now i want to remove all this 5 SAS and put 1 by 1 in any of the bay to make its image for data recovery purpose without writing anything to the drive. how should i proceed. i also want to keep drive c and d intact. also is it possible if i put all this 5 drives in the bay with the same sequense will it recognise the raid 5 array ( i read some where its smart controller..just curious) many thanks in advance.

    Read the article

  • How do I change OSX package install directory?

    - by Scott
    It drives me nuts that every time I download a binary to run on OSX that it wants to install in system directories. ~/Applications is a perfectly fine place to install and doesn't require blindly authenticating somebody else's binary. Is there a way to change the install directory for packages? On a few I've been able to open the package and edit the plist to install it elsewhere, but that doesn't work universally. I install from source when I can, but it isn't always an option. Is there a good way to force the installer to use ~/Applications?

    Read the article

  • Can't Remove Logical Drive/Array from HP P400

    - by Myles
    This is my first post here. Thank you in advance for any assistance with this matter. I'm trying to remove a logical drive (logical drive 2) and an array (array "B") from my Smart Array P400. The host is a DL580 G5 running 64-bit Red Hat Enterprise Linux Server release 5.7 (Tikanga). I am unable to remove the array using either hpacucli or cpqacuxe. I believe it is because of "OS Status: LOCKED". The file system that lives on this array has been unmounted. I do not want to reboot the host. Is there some way to "release" this logical drive so I can remove the array? Note that I do not need to preserve the data on logical drive 2. I intend to physically remove the drives from the machine and replace them with larger drives. I'm using the cciss kernel module that ships with Red Hat 5.7. Here is some information pertaining to the host and the P400 configuration: [root@gort ~]# cat /etc/redhat-release Red Hat Enterprise Linux Server release 5.7 (Tikanga) [root@gort ~]# uname -a Linux gort 2.6.18-274.el5 #1 SMP Fri Jul 8 17:36:59 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux [root@gort ~]# rpm -qa | egrep '^(hp|cpq)' cpqacuxe-9.30-15.0 hp-health-9.25-1551.7.rhel5 hpsmh-7.1.2-3 hpdiags-9.3.0-466 hponcfg-3.1.0-0 hp-snmp-agents-9.25-2384.8.rhel5 hpacucli-9.30-15.0 [root@gort ~]# hpacucli HP Array Configuration Utility CLI 9.30.15.0 Detecting Controllers...Done. Type "help" for a list of supported commands. Type "exit" to close the console. => ctrl all show config detail Smart Array P400 in Slot 0 (Embedded) Bus Interface: PCI Slot: 0 Cache Serial Number: PA82C0J9SVW34U RAID 6 (ADG) Status: Enabled Controller Status: OK Hardware Revision: D Firmware Version: 7.22 Rebuild Priority: Medium Expand Priority: Medium Surface Scan Delay: 15 secs Surface Scan Mode: Idle Wait for Cache Room: Disabled Surface Analysis Inconsistency Notification: Disabled Post Prompt Timeout: 0 secs Cache Board Present: True Cache Status: OK Cache Ratio: 25% Read / 75% Write Drive Write Cache: Disabled Total Cache Size: 256 MB Total Cache Memory Available: 208 MB No-Battery Write Cache: Disabled Cache Backup Power Source: Batteries Battery/Capacitor Count: 1 Battery/Capacitor Status: OK SATA NCQ Supported: True Logical Drive: 1 Size: 136.7 GB Fault Tolerance: RAID 1 Heads: 255 Sectors Per Track: 32 Cylinders: 35132 Strip Size: 128 KB Full Stripe Size: 128 KB Status: OK Caching: Enabled Unique Identifier: 600508B100184A395356573334550002 Disk Name: /dev/cciss/c0d0 Mount Points: /boot 101 MB, /tmp 7.8 GB, /usr 3.9 GB, /usr/local 2.0 GB, /var 3.9 GB, / 2.0 GB, /local 113.2 GB OS Status: LOCKED Logical Drive Label: A0027AA78DEE Mirror Group 0: physicaldrive 1I:1:2 (port 1I:box 1:bay 2, SAS, 146 GB, OK) Mirror Group 1: physicaldrive 1I:1:1 (port 1I:box 1:bay 1, SAS, 146 GB, OK) Drive Type: Data Array: A Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:1 Port: 1I Box: 1 Bay: 1 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM57RF40000983878FX Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 35 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 1I:1:2 Port: 1I Box: 1 Bay: 2 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM55VQC000098388524 Model: HP DG146BB976 Current Temperature (C): 29 Maximum Temperature (C): 36 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown Logical Drive: 2 Size: 546.8 GB Fault Tolerance: RAID 5 Heads: 255 Sectors Per Track: 32 Cylinders: 65535 Strip Size: 64 KB Full Stripe Size: 256 KB Status: OK Caching: Enabled Parity Initialization Status: Initialization Completed Unique Identifier: 600508B100184A395356573334550003 Disk Name: /dev/cciss/c0d1 Mount Points: None OS Status: LOCKED Logical Drive Label: A5C9C6F81504 Drive Type: Data Array: B Interface Type: SAS Unused Space: 0 MB Status: OK Array Type: Data physicaldrive 1I:1:3 Port: 1I Box: 1 Bay: 3 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2H5PE00009802NK19 Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 37 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 1I:1:4 Port: 1I Box: 1 Bay: 4 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM28YY400009750MKPJ Model: HP DG146ABAB4 Current Temperature (C): 31 Maximum Temperature (C): 36 PHY Count: 1 PHY Transfer Rate: 3.0Gbps physicaldrive 2I:1:5 Port: 2I Box: 1 Bay: 5 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FGYV00009802N3GN Model: HP DG146ABAB4 Current Temperature (C): 30 Maximum Temperature (C): 38 PHY Count: 1 PHY Transfer Rate: Unknown physicaldrive 2I:1:6 Port: 2I Box: 1 Bay: 6 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM8AFAK00009920MMV1 Model: HP DG146BB976 Current Temperature (C): 31 Maximum Temperature (C): 41 PHY Count: 2 PHY Transfer Rate: Unknown, Unknown physicaldrive 2I:1:7 Port: 2I Box: 1 Bay: 7 Status: OK Drive Type: Data Drive Interface Type: SAS Size: 146 GB Rotational Speed: 10000 Firmware Revision: HPDE Serial Number: 3NM2FJQD00009801MSHQ Model: HP DG146ABAB4 Current Temperature (C): 29 Maximum Temperature (C): 39 PHY Count: 1 PHY Transfer Rate: Unknown

    Read the article

  • Windows-Server-2003 setup on Dell-PowerEdge R310 is hanging [closed]

    - by Robert Rose
    Possible Duplicate: Problems installing OS on Dell PowerEdge R410 I am trying to configure a Dell PowerEdge R310 server with Windows Server 2003. I've already configured the two hard drives as RAID1. The HD controller is PERC H700 Integrated and Adapter. Trying to stay with Windows Server 2003 on this fairly new server to save on cost and keep the configuration the same as my old server, which has been running like a champ for five years. Problem: During the OS installation, after everything has been copied from the installation CD, the installation hangs at a window labeled 'Windows Setup' with the message 'Setup is starting Windows' at the bottom. I'm wondering if this is a driver problem and if so, where can I get the drivers for the R310 or where can I get the media for the latest version of Windows Server 2003 which may include the necessary drivers? Will certainly appreciate some help here.

    Read the article

  • Windows Home Server style redundancy/multi-disk-support on Windows Server 2008 R2?

    - by user19597
    I'm setting up a fileserver for our department. It'll be connected to the domain. I want it to have a very large amount of storage (several TB). Ideally, it should also preserve disk space by identifying identical files and only storing them once. It should be fault tollerant so that if one of the drives fails, that drive can be replaced without losing any data. All of these features are available in Microsoft's consumer offering - Windows Home Server. However, I can't find these kind of features within the enterprise Windows Server 2008 R2. Am I missing something? I know that I could buy a Drobo, or similar, and use this instead. However, I would prefer to use a built-in feature of Windows Server should it exist. It seems surprising to me that these features should be available in Home Server but not in an enterprise fileserver.

    Read the article

  • Can I get an adapter for usb 3.0 to gigabit, or a gigabit switch with usb 3.0?

    - by techaddict
    Basically I want to be able to attach USB 3.0 external portable hard drives to my network and maintain at least gigabit speeds. I can think of four ways to do this, two of which I know exist: 1) NAS - get an NAS which features USB 3.0 and gigabit 2) Gigabit router with a USB 3.0 port and I want to know if these two exist: 3) gigabit switch (multiple gigabit ports) with at least one USB 3.0 port 4) USB 3.0 to gigabit adapter The gigabit adapter would be similar to this: http://www.addonics.com/products/nas30u2.php except that that is only USB 2.0 so it is not true gigabit, as gigabit is 125MBps but USB 2.0 is only 60MBps, so that adapter only has a maximum transfer speed of 60MBps and the "gigabit" is practically useless.

    Read the article

  • Install 64-bit Ubuntu or 32-bit?

    - by nitbuntu
    I'll be receiving a new notebook in a few days and was planning on running Ubuntu on it as it's compatible and the notebook has no OS pre-installed. The specifications are: Core 2 Duo, T6600, 4 GB RAM, Intel integrated graphics. I know a year or two ago, running a 64-bit version of Ubuntu was not advised due to much of the applications and plugins (e.g. Flash) only running on 32-bit. Is this still the case? Would I get better performance with 64-bit Ubuntu since I have 4 GB of RAM? Are there any downsides anymore?

    Read the article

  • Viewing CHM Files Across The Network in Windows 7

    - by Lukas Cenovsky
    When I try to open .chm help from a network shared drive I receive the following error: Navigation to the webpage was canceled. I know about the .reg solution described on KB896054 [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\HTMLHelp\1.x\ItssRestrictions] "MaxAllowedZone"=dword:00000001 but it does not work in Windows 7. Any ideas how to make .chm help available from the network drives? Edit: I have the network path mapped to P: drive letter. My program runs from P: and I want to see the help for it. Copying the program to local drive is not a solution for me.

    Read the article

  • How to move 100mb hidden system reserved partition on Windows Server 2008 R2 to other drive?

    - by Artyom Krivokrisenko
    Hello! I have a server with two 1.5TB hard drives. I was going to install a Windows Server 2008 R2 and create software RAID1 using Windows Disk Management Utility. I instaleld Windows, open this console and that is what I see: http://i.imgur.com/KoC9a.png Setup program created a System Reserved Partition at my second HDD. I don't understand now, how can I create RAID1, because space, which supposed to be used for copy of disk C, now is used for this hidden partition. So is there any way now to create correct RAID1? May it is possible to move this partition to the Disk 0, where I have plenty of free space? Unfortunately I can't reinstall Windows and apply other options at the disk management step of the installation, because installation image is not longer connected to the server and I have no physical access to server, only remote desktop.

    Read the article

  • Intermittent login issues to SQL Server

    - by Etienne
    My website is an ASP.NET 2.0 website connecting to a SQL Express Database. Every now and then I get the following error message when I load my site. Login Failed for Username 'MyUsername'. Then on another time I get the following error message. A transport-level error has occurred when receiving results from the server. (provider: TCP Provider, error: 0 - The specified network name is no longer available.) After pressing F5 a few times it will go away. It is very intermittent and it drives me nuts as the company hosting my website cant figure out why this is happening. Then it works then it does not, then it does then it does not! Any idea???

    Read the article

  • Disable drop shadows around windows or the menu bar on OS X

    - by Lri
    Nocturne has an option for disabling shadows around windows. But it's only available in night mode, and changing the mode (like when opening the application) causes an annoying screen flash animation. There's no way to disable the shadow under the menu bar either. MacThemes Forum / Removing the menubar dropshadow has a link to a .psd for making special desktop backgrounds that cancel out the shadow under the menu bar. But it only works if that area of the desktop picture has a low enough brightness. Some applications that cover the desktop (like DeskShade) also cover the menu bar's shadow. That's not a real solution though. Unsanity's ShadowKiller stopped working in either 10.5 or 10.6. (It does still work on 10.7.2, but the website says "NOT compatible with Mac OS X 10.6 Leopard", and I couldn't get it to work on a 10.6 installation.) Related: How do I decrease the window shadow in Mac OS X? - Super User

    Read the article

  • Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

    - by Ben
    I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

    Read the article

  • mac: How to mount ejected external hdd again

    - by Maurice Kroon
    I've used my WD My Book 1TB for quite some time now. I always simply unplug it without officially 'ejecting' it. However, yesterday I did eject it (the partitions) before unplugging it. However, now, when i reconnect the hdd, it does not show the drives. It only shows the WD SmartWare partition (which is empty btw). The rest doesn't start. Does anyone know how to mount an unmounted disk? thx in advance!

    Read the article

  • Converting hierarchial data into an unordered list Programmatically using asp.net/C#

    - by kranthi
    hi everyone, I've data which looks something like this. | id | name | depth | itemId | +-----+----------------------+-------+-------+ | 0 | ELECTRONICS | 0 | NULL | | 1 | TELEVISIONS | 1 | NULL | | 400 | Tube | 2 | NULL | | 432 | LCD | 3 | 1653 | | 422 | Plasma | 3 | 1633 | | 416 | Portable electronics | 3 | 1595 | | 401 | MP3 Player | 3 | 1249 | | 191 | Flash | 2 | NULL | | 555 | CD Players | 3 | 2198 | | 407 | 2 Way Radio | 3 | 1284 | | 388 | I've a problem with | 3 | 1181 | | 302 | What is your bill pa | 3 | 543 | | 203 | Where can I find my | 3 | 299 | | 201 | I would like to make | 3 | 288 | | 200 | Do you have any job | 3 | 284 | | 192 | About Us | 3 | NULL | | 199 | What can you tell me | 4 | 280 | | 198 | Do you help pr | 4 | 276 | | 197 | would someone help co| 4 | 272 | | 196 | can you help ch | 4 | 268 | | 195 | What awards has Veri | 4 | 264 | | 194 | What's the latest ne | 4 | 260 | | 193 | Can you tell me more | 4 | 256 | | 180 | Site Help | 2 | NULL | | 421 | Where are the | 3 | 1629 | | 311 | How can I access My | 3 | 557 | | 280 | Why isn't the page a | 3 | 512 | To convert the above data into unordered list based on depth, I'm using the following code int lastDepth = -1; int numUL = 0; StringBuilder output = new StringBuilder(); foreach (DataRow row in ds.Tables[0].Rows) { int currentDepth = Convert.ToInt32(row["Depth"]); if (lastDepth < currentDepth) { if (currentDepth == 0) { output.Append("<ul class=\"simpleTree\">"); output.AppendFormat("<li class=\"root\"><span><a href=\"#\" title=\"root\">root</a></span><ul><li class=\"open\" ><span><a href=\"#\" title={1}>{0}</a></span>", row["name"],row["id"]); } else { output.Append("<ul>"); if(currentDepth==1) output.AppendFormat("<li><span>{0}</span>", row["name"]); else output.AppendFormat("<li><span class=\"text\"><a href=\"#\" title={1}>{0}</a></span>", row["name"], row["id"]); } numUL++; } else if (lastDepth > currentDepth) { output.Append("</li></ul></li>"); if(currentDepth==1) output.AppendFormat("<li><span>{0}</span>", row["name"]); else output.AppendFormat("<li><span class=\"text\"><a href=\"#\" title={1}>{0}</a></span>", row["name"], row["id"]); numUL--; } else if (lastDepth > -1) { output.Append("</li>"); output.AppendFormat("<li><span class=\"text\"><a href=\"#\" title={1}>{0}</a></span>", row["name"],row["id"]); } lastDepth = currentDepth; } for (int i = 1; i <= numUL+1; i++) { output.Append("</li></ul>"); } myliteral.text=output.ToString(); But the resulting unordered list doesnt seem to be forming properly(using which i am constructing a tree).For example "Site Help" with id '180' is supposed to appear as a direct child of "Televisions" with id '1',is appearing as a direct child of 'Flash' with id '191' using my code.so in addition to considering depth,I've decided to consider itemid as well in order to get the treeview properly.Those rows of the table with itemId not equal to null are not supposed to have a child node(i.e.,they are the leaf nodes in the tree) and all the other nodes can have child nodes. Please could someone help me in constructing a proper unordered list based on my depth,itemid coulumns? Thanks.

    Read the article

  • Device cannot be added on software-raid-1 array on Ubuntu 12.04

    - by George Pligor
    Unfortunately all tutorials I have found online until now on how to setup software-raid-1 are outdated on ubuntu 12.40 My target is to setup it on a system with a secondary disk drive that is already running. Format is not an option! I am trying to follow and adapt from 11.10 to 12.04 the following tutorial: http://www.howtoforge.com/how-to-set-up-software-raid1-on-a-running-lvm-system-incl-grub2-configuration-ubuntu-11.10-p2 On the above tutorial there is a successful command which creates a raid-1 array by setting the first disk drive with the installed system as missing: mdadm --create /dev/md0 --level=1 --raid-disks=2 missing /dev/sdb1 But when the time comes to add the first main drive with the installed system on the raid-array with this command: mdadm --add /dev/md0 /dev/sda1 I receive an error message. The error message says that the device /dev/sda is (which makes sense) busy! Note: hardware raid solution is not available since the system is a laptop with two disk drives! Thank you

    Read the article

  • TRIM in centos 5.X?

    - by Frank Farmer
    I've got a bunch of centos 5 boxes with Intel X-25 drives (x25-m in dev, x25-e in prod, I think). We're seeing severely degraded disk performance on one of our dev boxes (which easily does 5+ gb of writes every day, meaning we write the full drive's worth of data several times a month). The box in question: Intel x25-m Ext3 (which doesn't support TRIM) centos 5 vmware ESXi Wikipedia mentions that newer versions of hdparm (which centos5 doesn't include) can bulk-TRIM free blocks. This utility also sounds potentially useful: http://blog.patshead.com/2009/12/a-quick-and-dirty-wipersh-fix-for-intel-x25-m.html Disk write performance has dropped to <1 MB/sec while copying a 300 meg directory on this system, as of a month or so ago -- it used to be able to perform the same copy operation at least 5 times faster. What can I do to recover performance on this system?

    Read the article

  • Find and free disk space that is unused but unavailable (due to file system error, etc.)

    - by Voyagerfan5761
    Sometimes I get the feeling that if an app such as μTorrent allocates files on my FAT32-formatted flash drive, but then is killed or crashes (as happens more than a few times a month), that space just disappears from my file system. Whether or not that is the case, sometimes I do get a chill from wondering if I've lost hundreds of MB in available storage due to carelessness or malfunctions. Checking my disk with WinDirStat just makes it worse, because I see the huge "<Unknown>" item at the disk root staring at me, eating up well over a gigabyte. It might be FS inefficiency (due to 32 or 64kb sector/cluster size and a lot of tiny files) or it might be a glitch... Is there a tool I can download and run to check my file system and make sure that there aren't any unused allocated blocks on the disk? I want to make sure I'm not losing any disk space to I/O errors, etc.

    Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >