Search Results

Search found 21235 results on 850 pages for 'www'.

Page 273/850 | < Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >

• Having trouble with a workaround, for booting from a usb stick, using grub and a minimal linux kernel to load usb drivers

  - by s hanley

  I'm trying to boot from a usb stick. I formatted it to fat32, and later to ext2, and installed dsl on it using unetbootin, and later the usb install guide on dsl wiki (http://www.damnsmalllinux.org/wiki/index.php/Install_to_USB_From_within_Linux). The bios doesn't have a setting for booting from usb. Grub doesn't "see" the usb drive when I use the root and find commands, explained in (http://www.damnsmalllinux.org/wiki/index.php/USB_Booting). This happens even when I set boot from floppy at the top of the boot order. However, my usb keyboard is recognised by the bios and by grub. How can it recognise the keyboard but not the usb drive? Also, the usb led does flash even before grub starts up, so surely something must be happening usb-wise? I am now following an ubuntu guide to booting from a USB stick, using a hdd-based, minimal linux kernel to supply the usb drivers. But I'm having difficulty adapting it to other OSes (slax/dsl/aptosid). I believe I have to alter the initrd.gz file to include usb drivers and then copy that file along with vmlinuz to a partition on my hdd. But, what's the grub command for the kernel line supposed to look like? From the ubuntu example it's: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz file=/cdrom/preseed/ubuntu.seed boot=casper noprompt cdrom-detect/try-usb=true persistent initrd /boot/usb-boot/initrd.lz boot Should mine just be: title USB FLASH DRIVE root (hd0,6) kernel /boot/usb-boot/vmlinuz cdrom-detect/try-usb=true initrd /boot/usb-boot/initrd.lz boot

  Read the article

• postfix revived and delivered have the same values (?)

  - by thinkingbig

  I have configured my first server (Debian with ISPConfig). Generally i want to send bulk e-mails to our users, i configure postfix and turn on postfix... but... After 1 hour of sending emails i have logs like this: Grand Totals messages 21886 received 21883 delivered 0 forwarded 0 deferred 234 bounced 0 rejected (0%) 0 reject warnings 0 held 0 discarded (0%) 30805k bytes received 31280k bytes delivered 3 senders 3 sending hosts/domains 12588 recipients 3 recipient hosts/domains Per-Hour Traffic Summary time received delivered deferred bounced rejected -------------------------------------------------------------------- 0000-0100 0 0 0 0 0 0100-0200 0 0 0 0 0 0200-0300 0 0 0 0 0 0300-0400 0 0 0 0 0 0400-0500 0 0 0 0 0 0500-0600 0 0 0 0 0 0600-0700 0 0 0 0 0 0700-0800 0 0 0 0 0 0800-0900 0 0 0 0 0 0900-1000 0 0 0 0 0 1000-1100 0 0 0 0 0 1100-1200 0 0 0 0 0 1200-1300 0 0 0 0 0 1300-1400 0 0 0 0 0 1400-1500 0 0 0 0 0 1500-1600 15311 15306 0 168 0 1600-1700 6575 6577 0 66 0 1700-1800 0 0 0 0 0 1800-1900 0 0 0 0 0 1900-2000 0 0 0 0 0 2000-2100 0 0 0 0 0 2100-2200 0 0 0 0 0 2200-2300 0 0 0 0 0 2300-2400 0 0 0 0 0 Host/Domain Summary: Message Delivery sent cnt bytes defers avg dly max dly host/domain 21521 30353k 0 3.4 m 15.5 m wp.pl 355 919k 0 54.9 s 13.0 m mysenderdomainexample.pl 7 8477 0 1.7 s 1.9 s prokonto.pl Host/Domain Summary: Messages Received msg cnt bytes host/domain 21879 30786k mysenderdomainexample.pl 5 16196 mx4.wp.pl 1 3200 mx3.wp.pl Senders by message count 21783 [email protected] 96 [email protected] 6 from=< **So, my question is: 1) Why i have recived and delivered have the same values (approx)? 2) How can I check if an email has been delivered? 3) How to change default "root" and "www-data" user (FROM / RETURN PATH) to another? I have changed this in script, but postfix ignore scripting values and send every mail from root (we have .php send cron's in /etc/crontab) 4) WHY APPROX 100 % MAILS RECIVED HAS BEEN ADRESED TO MY SENDER HOST? Host/Domain Summary: Messages Received Waiting for respond, Regards TB**

  Read the article

• Why is XSP/mono giving me file/write errors with lucence?

  - by acidzombie24

  I am using mono 2.6.7, xsp 2.8.? and i am not sure what else. I'll try downgrading xsp and whatever else. Today i notice my server randomly gets Http Error 500, internal server error. I looked in my log files http://www.pastie.org/1426236 and it appears that the problem is locking lucence which it does by creating a file called write.lock. This use to work with no problem but now it gives me pain. It will fix itself if i refresh the page several times but it will break just as easily. My other site will not work everytime i restart apache and i need to by hand delete the file (at least it doesnt get random 500 errors). However now it just says Lock obtain timed out: NativeFSLock@/var/www/SITE_2/App_Data/LuceneIndex_a/write.lock no matter what. I even chmod -R 777 the directory and still no luck. write.lock doesnt even exist. I have no clue whats going on. Any ideas?

  Read the article

• RAID-capable 3.5" SATA Drives

  - by nroam

  I recently purchased a pair of 1TB Western Digital WD1002FBYS RE3 drives for use in an external RAID enclosure. I have found that they tend to drop out of the array after a while. Thinking it was the enclosure I tried them on another one but found the same issue. So a bit of googling and I found http://www.tomshardware.com/forum/251076-32-raid-issues-western-digital-hard-disk which suggests that: "WD's "RE" (RAID Edition) HDDs support Time-Limited Error Recovery ("TLER" ): http://www.wdc.com/en/products/productcatalog.asp?language=en As a non-TLER HDD fills up with data, the error detection firmware might take too long, and the RAID controller may drop that HDD from a RAID array." So now I wonder what SATA drives have firmware which is compatible with RAID arrays (esp. RAID 1, 5, but not 0)? I have not been able to come up with the magic set of keywords to ellicit the answer from Google. However, various sites suggest that Seagate & Hitachi are in general OK. Does anyone have any generic (or even specific) guidance on how to work out if a drive's firmware may harbour code that is potentially an issue in a RAID0 setting other than stating that it must be 'enterprise' ready?

  Read the article

• DirectAdmin Centos4 server has virus

  - by Rogier21

  Hello all, I have a problem with a webserver that runs Centos4 with DirectAdmin. Since a few weeks some websites hosted on it are not redirecting on search engines properly, they are redirected to some malware site, resulting in a ban from google. Now I have used 3 virusscanners: ClamAV: Didn't find anything Bitdefender: Found a 2-3 files with JS infection, deleted them AVG: Finds lots of files, but doesn't have the option to clean! The virus that it finds is: JS/Redir JS/Dropper Still the strange thing is: website a (www.aa.com) does not have any infected files (have gone through all the files manually, is a custom PHP app, nothing special) but does still have the same virus. Website b (www.bb.com) does have the infected files as only one. I deleted all these files and suspended the account, but no luck, still the same error. I do get the log entries on the website from the searchengines so the DNS entries are not changed. But now I have gone through the httpd files but cannot find anything. Where can I start looking for this?

  Read the article

• Seperate external and intranet portals using the same functions .htaccess

  - by jezzipin

  We are currently struggling with setting up rules for a .htaccess file for a website built upon our company product. The product is built using PLSQL and procedures can be accessed using URLs. We use this functionality to present different options to our users. These options can be injected into HTML pages using replacement tags. So, the tag [user_menu] is always replaced with: /wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} for external sites and /intranet/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} for internal sites. The issue we are having is twofold. We need to write our .htaccess rules so that the user can access the functionality whether they are internal or external. So, the links should work as follows: http://www.example.com/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} or http://www.example.com/internal/wd_portal_cand.menu?p_web_site_id={variable1}&p_candidate_id={variable2} This is the other problem. As you can see for the internal link above, the procedure needs to be prefixed with internal instead or intranet. We cannot change this in our standard tags as this will affect other sites so we need to achieve this also using htaccess. Could anyone assist with this issue? I apologise if this is brief or confusing but it's something i've never done before and have been given the task of doing. I apologise for the lack of code that will be posted above however I am a front end developer and have been left to make these changes having no prior experience of .htaccess to please bare with me.

  Read the article

• virtual web folder served by PHP script

  - by Martin

  I am trying to configure my apache to be able to display (virtual) pages like: mywebpage.com/something1 mywebpage.com/something2 mywebpage.com/folder/something3 I would like these "somethingX" and "folder" folders to be only virtual, not physical directories. For a start it would be great to send all requests to mywebpage to one PHP script which will somehow receive the original path information (there is some SERVER array as far as I know) and call necessary PHP functions (so far I use addresses like mywebpage.com/index.php?page=blabla&otherparameters=values...). Is that possible? I am struggling with different combination, currently I am with following file in /etc/apache2/conf.d/something.conf (not working of course). What is the correct way to proceed? Thanks. <Location /myweb> SetHandler my-handler Action my-handler /srv/www/htdocs/myweb/product.php virtual </Location> My pages are in /srv/www/htdocs/myweb. I tried with Location, with Directory, with Action and SetHandler, with AddHandler... ;-) Some configurations were ignored, some caused "object not found" with nothing relevant in error log.

  Read the article

• How do you create an ssh key for the apache user on Redhat?

  - by Josh Smeaton

  As the question asks, how do I generate an ssh key for the user apache on Redhat? My use case, is that we have a mercurial server running under the apache user. We also have several web servers clustered that we need to log on to manually and do pulls from. Ideally, what we'd like to do is have the mercurial server push all changes to all the webservers in the cluster. To do this, we want to use ssh, as setting up http mercurial servers on each of the web servers seems like too much work, and far too heavy. What I've tried to do is the following: > sudo mkdir /var/www/.ssh > sudo chown -R apache:nobody /var/www/.ssh > su - apache -c "ssh-keygen -t rsa" This account is currently not available. I found the above commands elsewhere, but I can only assume that Redhat has differences to whatever distro was used for the above. Is there a way I can generate an ssh-key for the apache user?

  Read the article

• Error authenticating git repository with Redmine

  - by woni

  I've setup Redmine 2.1 on my Debian Squeeze server following this Tutorial HowTo configure Redmine for advanced git integration (I tried to use the grack path). Redmine server is running properly, but I have a problem granting users access to git repositories. When I try to clone a repository it says: error: The requested URL returned error: 500 while accessing The apache error.log shows this entry: [Fri Sep 28 15:50:56 2012] [crit] [client xx.xx.xx.xx] configuration error: couldn't check user. Check your authn provider!: /repo.git/info/refs It also asks me for user and password when cloning, but it shouldn't if I understand the tutorial right. I'm using the Redmine authentication module: <VirtualHost *:80> ServerName my.server.at DocumentRoot "/var/www/my.server.at/public" PerlLoadModule Apache::Redmine <Directory "/var/www/my.server.at/public"> Options None AllowOverride None Order allow,deny Allow from all </Directory> SetEnv REMOTE_USER=$REDIRECT_REMOTE_USER" SetEnv GIT_PROJECT_ROOT /var/git/my.server.at/ SetEnv GIT_HTTP_EXPORT_ALL ScriptAlias /git/ /usr/lib/git-core/git-http-backend <Location /> Order allow,deny Allow from all AuthType Basic AuthName Git Require valid-user AuthBasicAuthoritative Off AuthUserFile /dev/null AuthGroupFile /dev/null PerlAccessHandler Apache::Authn::Redmine::access_handler PerlAuthenHandler Apache::Authn::Redmine::authen_handler RedmineDSN "DBI:mysql:database=redmine;host=localhost" RedmineDbUser "user" RedmineDbPass "password" RedmineGitSmartHttp yes </Location> </VirtualHost> Can someone help me please and explain the error and what I can do to solve my problem?

  Read the article

• How to make Firefox file associations consistent with Ubuntu file associations?

  - by wbharding

  This seems to be a pretty commonly Google question, but one for which there are no answers. http://www.linuxquestions.org/questions/linux-software-2/firefox-download-mime-types-378902 http://www.birkit.com/content/kubuntu-linux/internet/firefox/fix-file-associations-in-firefox.html Being three links amongst the many. The gist of what I want to accomplish is to have Firefox understand the file associations I download without me having to manually map all of them myself. Gnome knows the file extensions, so I would have expected that Firefox could just use the already-known file mappings there to open the right stuff (as I presume Chrome does). But it doesn't. At least not for me, using Firefox 4, and not by default. When I click on a downloaded file right now, Firefox always has to ask me what application should be used to open the file. A handful of Google results tell me that I can reassociate my file extensions by deleting ~/.mozilla/firefox/[profile name]/mimeTypes.rdf, but while deleting that file does in fact result in a new mimeTypes file being generated, the new mimeTypes is just as barren as the old one had been. Based on the amount of unanswered Qs on the Googlesphere, I know this is a very common problem for Ubuntu users, but it seems to be one for which nobody has chimed in with a good solution. Maybe Superuser can finally be the panacea for us all?

  Read the article

• Apache mod_proxy

  - by mhouston100

  Uggh, I'm spewing that I can't figure this out, I'm so frustrated: <VirtualHost *:80> servername domain1.com.au ServerAdmin webmaster@localhost DocumentRoot /var/www/html ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined <Proxy *> Order Allow,Deny Allow from all </Proxy> RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] </VirtualHost> <VirtualHost *:443> servername domain1.com.au SSLEngine on SSLCertificateFile /etc/apache2/ssl/owncloud.pem SSLCertificateKeyFile /etc/apache2/ssl/owncloud.key DocumentRoot /var/www/html </VirtualHost> <VirtualHost *:*> Servername domain2.com.au ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / https://192.168.1.12/ ProxyPassReverse / https://192.168.1.12/ </VirtualHost> Not sure if it's clear what I'm trying to do, but I've read and read and READ, I still can't figure it out. Basically I have a working Apache server with a rewrite to force HTTPS, as seen in the first two VirtualHost entries. I now have a webmail service I set up on another server, under another domain name, however I only have one incoming public IP address. So I'm trying to have any incoming requests for the second domain to be proxied to the other server to access the webmail, whether its port 80 or 443. IMAP and POP3 are no problems, I can just forward the ports directly to the correct server. The results of the above configuration is that requests to domain2.com.au (port 80 or 443) are forwarded to https://domain1.com.au. Am I headed in the right direction?

  Read the article

• What differences are there between "home" switches and "professional" switches?

  - by pjreddie

  Our radio station uses a PtP wireless system to stream our radio and TV signals from our studio up a hill to our transmitter. We have been having problems with warbly sound and drop outs that come from some point in this system. An engineer that occasionally visits the station thinks it could be the switches we use on each side of the PtP wireless system to connect the PtP devices to the encoders and decoders and wants us to get two of these switches: http://www.amazon.com/Netgear-JGS516-ProSafe-16-Port-Ethernet/dp/B0002CWPOK/ref=dp_return_1 The encoder/decoder setup only streams 8Mbps total so it seems like the switches we have should not be stressed out, unless they are causing sufficient latency to degrade the performance of the encoder/decoder. At each end of the connection we only have 4 connections, is there any reason we couldn't get a cheaper, "home" quality switch like this: http://www.amazon.com/D-Link-DGS-1005G-5-Port-Gigabit-Desktop/dp/tech-data/B003X7TRWE/ref=de_a_smtd Is there a significant difference that we would notice in terms of latency between these two switches? How much does the quality of the switch actually matter in this scenario? Any help is appreciated, feel free to ask questions if anything needs clarification. Thanks

  Read the article

• Cannot configure hostname keeps on changing after reboot CentOS 6 + nginx [on hold]

  - by The Wolf

  I just finished this tutorial I found online: http://www.unixmen.com/install-lemp-nginx-with-mariadb-and-php-on-centos-6/ Now, I am having trouble making a hostname, you can see the result at: http://www.intodns.com/busilak.com here are my confs /etc/hosts 127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4 # Auto-generated hostname. Please do not remove this comment. 198.49.66.204 host.busilak.com busilak.com host ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 /etc/sysconfig/network NETWORKING="yes" GATEWAYDEV="venet0" NETWORKING_IPV6="yes" IPV6_DEFAULTDEV="venet0" HOSTNAME="host.busilak.com" /etc/nginx/conf.d/default.conf server { #listen 80; #server_name host.busilak.com; #charset koi8-r; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } Question: Is there anything I should have done? I just want to use my domain: busilak.com as default domain for my server, such that when I open busilak.com it would point readily to my VPS ip address.

  Read the article

• What is wrong with my DNS entries?

  - by matheus

  I have some problems with a domain not working as expected. My registrar's controlpanel shows these records for mydomain.eu: www A 111.222.333.444 * A 111.222.333.444 I use the nameservers of my registrar. I get a correct answer if i do dig www.mydomain.eu dig whatever.mydomain.eu I can also ping/visit website etc with those adresses. But, dig mydomain.eu wont resolve to anything. I just get this: ; <<>> DiG 9.6-ESV-R1 <<>> mydomain.eu ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 46837 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.eu. IN A ;; AUTHORITY SECTION: mydomain.eu. 1799 IN SOA ns1.binero.se. registry.binero.se. 1281647822 3600 240 1209600 3600 ;; Query time: 77 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Thu Jan 6 01:36:31 2011 ;; MSG SIZE rcvd: 83 The same A-record setup work for another domain/server ip, but that domain has other nameservers. What am I missing here?

  Read the article

• IIS8 Application request routing

  - by JustDanyul

  Sorry for what is most likely NOT a very intelligent question, but my non-sysadmin brain is struggling to understand what is causing my problem. Basically, I wan't to enable reverse proxying on a IIS8 box. I read though this article: http://www.iis.net/learn/extensions/url-rewrite-module/reverse-proxy-with-url-rewrite-v2-and-application-request-routing And I've installed the ARR extension from here: http://www.iis.net/downloads/microsoft/application-request-routing Now, I enabled the proxying (as explained in the MS tutorial), and I felt the other setting as they where (again, as instructed in the tutorial). My rule looks like the following <rule name="Reverse Proxy to payroll" stopProcessing="true"> <match url="^mytest/(.*)" /> <action type="Rewrite" url="http://localhost:8282/{R:1}" /> </rule> But alas, it doesn't work. If I change it to a "normal" rewrite rule, as in <rule name="Reverse Proxy to payroll" stopProcessing="true"> <match url="^mytest/(.*)" /> <action type="Rewrite" url="/{R:1}" /> </rule> Then it works. So, it must differently be something with the reverse proxy. Any idea what gives?

  Read the article

• Limit access on Apache 2.4 to ldap group

  - by jakobbg

  I've upgraded from Ubuntu 12.04 LTS to 14.04 LTS, and suddenly, my Apache 2.4 (previous: Apache 2.2) now lets everybody in to my virtual host, which is unfortunate :-). What am I doing wrong? Anything with the Order/Allow lines? Any help is greatly appreciated! Here's my current config; <VirtualHost *:443> DavLockDB /etc/apache2/var/DavLock ServerAdmin [email protected] ServerName foo.mydomain.com DocumentRoot /srv/www/foo Include ssl-vhosts.conf <Directory /srv/www/foo> Order allow,deny Allow from all Dav On Options FollowSymLinks Indexes AllowOverride None AuthBasicProvider ldap AuthType Basic AuthName "Domain foo" AuthLDAPURL "ldap://localhost:389/dc=mydomain,dc=com?uid" NONE AuthLDAPBindDN "cn=searchUser, dc=mydomain, dc=com" AuthLDAPBindPassword "ThisIsThePwd" require ldap-group cn=users,dc=mydomain,dc=com <FilesMatch '^\.[Dd][Ss]_[Ss]'> Order allow,deny Deny from all </FilesMatch> <FilesMatch '\.[Dd][Bb]'> Order allow,deny Deny from all </FilesMatch> </Directory> ErrorLog /var/log/apache2/error-foo.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access-foo.log combined </VirtualHost>

  Read the article

• What does SQL Server's BACKUPIO wait type mean?

  - by solublefish

  I'm using Sql Server 2008 ("R1"), with some maintenance plans that back up my databases to a network share. Some of my backup jobs show long waits of type "BACKUPIO". Of course it seems like this is an I/O subsystem limitation, but I'm skeptical. Perfmon stats for I/O on the production (source) server are well within normal trends for that server. The destination server shows a sustained 7MB/s write rate, which seems incredibly low, even for a slow disk. The network link is gigabit ethernet and nowhere near saturated. The few docs I've turned up about BACKUPIO indicate that it's not specifically a wait on I/O, surprisingly enough. This MSFT doc says it's abnormal unless you're using a tape drive, which I'm not. But it doesn't say (or I don't understand) exactly what resource is missing. http://www.docstoc.com/docs/24580659/Performance-Tuning-in-SQL-Server-2005 And this piece says it's not related to I/O performance at all. http://www.informit.com/articles/article.aspx?p=686168&seqNum=5 "Note that BACKUPIO and IO_AUDIT_MUTEX are not related to IO performance." Anyway, does anyone know what BACKUPIO actually means and/or what I can do to diagnose or eliminate it?

  Read the article

• How to import this data set into excel? (column headings on each row delimited by a colon)

  - by Anonymous

  I'm trying to import the following data set into Excel. I've had no luck with the text import wizard. I'd like Excel to make id, name, street, etc the column names and insert each record onto a new row. , id: sdfg:435-345, name: Some Name, type: , street: Address Line 1, Some Place, postalcode: DN2 5FF, city: Cityhere, telephoneNumber: 01234 567890, mobileNumber: 01234 567890, faxNumber: /, url: http://www.website.co.uk, email: [email protected], remark: , geocode: 526.2456;-0.8520, category: some, more, info , id: sdfg:435-345f, name: Some Name, type: , street: Address Line 1, Some Place, postalcode: DN2 5FF, city: Cityhere, telephoneNumber: 01234 567890, mobileNumber: 01234 567890, faxNumber: /, url: http://www.website.co.uk, email: [email protected], remark: , geocode: 526.2456;-0.8520, category: some, more, info Is there any easy way to do this with Excel? I'm struggling to think of a way to convert this to a conventional CSV easily. As far as I can think, I'd have to remove the labels from each line, enclose each line in quotes, then delimit them with commas. Obviously that's made a little more difficult to script though seeing as some fields (address, for instance) contain comma-delimited data. I'm not good with regex at all. What's the best way to tackle this?

  Read the article

• How to know who accessed a file or if a file has 'access' monitor in linux

  - by J L

  I'm a noob and have some questions about viewing who accessed a file. I found there are ways to see if a file was accessed (not modified/changed) through audit subsystem and inotify. However, from what I have read online, according to here: http://www.cyberciti.biz/tips/linux-audit-files-to-see-who-made-changes-to-a-file.html it says to 'watch/monitor' file, I have to set a watch by using command like: # auditctl -w /etc/passwd -p war -k password-file So if I create a new file or directory, do I have to use audit/inotify command to 'set' watch first to 'watch' who accessed the new file? Also is there a way to know if a directory is being 'watched' through audit subsystem or inotify? How/where can I check the log of a file? edit: from further googling, I found this page saying: http://www.kernel.org/doc/man-pages/online/pages/man7/inotify.7.html The inotify API provides no information about the user or process that triggered the inotify event. So I guess this means that I cant figure out which user accessed a file? Only audit subsystem can be used to figure out who accessed a file?

  Read the article

• Computer Won't Boot Properly, unless in safe mode?

  - by Mr_CryptoPrime

  I bought a computer today and booted it up, but when I did I only got a blank screen. I checked to make sure it wasn't the monitor by connecting it to my old computer...it worked. I then tried connecting my monitor to both DVI ports and found that the bottom one did work. However, now it just boots up and says "loading windows" and then when the login screen is suppose to come up the screen just goes blank and monitor says "no input, check cord" (or something like that). I tried reinstalling windows and then I was able to log on normally. I used the CD's and reinstalled all the drivers, then rebooted...now I am stuck right back where I started. I tried taking out the RAM and inserting into different slots, that didn't fix anything. I was able to boot up into windows using safe-mode. I suspected that my ATI Radeon 6950 was the issue and downloaded the drivers, but I can't install them on safe-mode. Someone said to install C++ distr. and I tried doing that to fix driver installation problem of "failed to load detection driver" but it wouldn't let me do that either. Please someone help me, I don't want to have to deal with the evil redtape of sending it back to get a replacement! My computer: -Content--text-_-"http://www.newegg.com/Product/Product.aspx?Item=N82E16883229236&nm_mc=TEMC-RMA-Approvel&cm_mmc=TEMC-RMA-Approvel--Content--text-_- Driver detection problem: http://www.hardwareheaven.com/hardwareheaven-tools-discussion/174912-failed-load-detection-driver-installation-error.html Driver download page: http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#1 I am using windows 7. Thanks again.

  Read the article

• Is there any reason this cronjob would fail in cron, but not on the command line?

  - by Treffynnon

  I have written a little one liner that will email me when a list of files changes - I used sha512 to generate a list of hashes and then periodically check that those hashes still match. */5 * * * * /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] It works fine on the command line with: /usr/bin/sha512sum --status -c /sha512.sumlist && echo "Success" > /dev/null || echo "Check robots.txt and index.html in /var/www as staging sites are now potentially exposed to the world and the damned googlebot" | /usr/bin/mail -s "Default staging server files have changed" [email protected] As soon as I run it as a cronjob though it emails every time it runs with the failure message instead of only when the sha512sum check should fail. Is there something silly I have missed in a rush? I forgot to mention that I am running an Ubuntu machine.

  Read the article

• Nginx redirect all request that does not match a file to a php file

  - by cyrbil

  I'm trying to get all request to: http://mydomain.com/downloads/* redirect to http://mydomain.com/downloads/index.php except if the requested file exist in /downloads/ ex: http://mydomain.com/downloads = /downloads/index.php http://mydomain.com/downloads/unknowfile = /downloads/index.php http://mydomain.com/downloads/existingfile = /downloads/existingfile My current problem is I have either the redirection to php working but static files not served or the opposite. Here is my current vhost conf: (which redirect fine but static files are send to php and fail) server { listen 80; ## listen for ipv4; this line is default and implied server_name domain.com; root /data/www; index index.php index.html; location / { try_files $uri $uri/ /index.html; } error_page 404 /404.html; # redirect server error pages to the static page /50x.html error_page 500 502 503 504 /50x.html; location = /50x.html { root /usr/share/nginx/www; } location ^~ /downloads { fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_index index.php; include fastcgi_params; try_files $uri @downloads; } location @downloads { rewrite ^ /downloads/index.php; } # pass the PHP scripts to FastCGI server # location ~ \.php$ { try_files $uri =404; fastcgi_split_path_info ^(.+\.php)(/.+)$; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_index index.php; include fastcgi_params; } } Precision: static files are symlinks created by /downloads/index.php Thank you for your help.

  Read the article

• Apache with multiple domains, single IP, VirtualHost is catching the wrong traffic

  - by apuschak

  I have a SOAP web service I am providing on a apache web server. There are 6 different clients (IPs) that request data and 3 of them are hitting the wrong domain. I am trying to find a way to log which domain name the requests are coming from. Details: ServerA is the primary ServerB is the backup domain1.com - the domain the web service is on domain2.com - a seperate domain that server seperate content on ServerB ServerA is standalone for now with its own IP and DNS from domain1.com. This works for everyone. ServerB is a backup for the web service, but it already hosts domain2.com. I added entries into the apache configuration file like: <VirtualHost *:443> ServerName domain2.com DocumentRoot /var/www/html/ CustomLog logs/access_log_domain2443 common ErrorLog logs/ssl_error_log_domain2443 LogLevel debug SSLEngine on ... etc SSL directives ... </VirtualHost> I have these for both 80 and 443 for domain1 and domain2 with domain1 being second. The problem is when we switch DNS for domain1 from ServerA to ServerB, 3 out of the 6 clients show up in the debug logs as hitting domain2.com instead of domain1.com and fail their web service request because domain2.com is first in the apache configuration file and catching all requests that don't match other virtualhosts, namely domain1.com. I don't know if they are hitting www.domain1.com, domain1.com (although I added entries for both) or using the external IP address or something else. Is there a way to see which URL they are hitting not just the page request or someother way to see why the first domain is catching traffic meant for the second listed domain? In the meantime, I've put domain1.com higher in the apache configuration than domain2.com. Now it catches the requests for all clients and works, however I don't know what it is catching and would like to make domain2.com the first entry again with a correct entry for domain1.com, for however they are hitting it. Thank you for your help! Andrew

  Read the article

• cPanel FTP account access to sym links from parent directory

  - by totbar

  I would like to give a potential developer temporary access to some of my projects. I have almost everything in its own subdomain, and each directory is a sibling to my public_html directory. It looks something like: ("developer" is the cPanel account name.) developer/ *This is the top level directory for the cPanel account. "/home/developer" site1/ *site1.mysite.com site2/ *site2.mysite.com site3/ *site3.mysite.com public_html/ *www.mysite.com ... etc I created a directory inside public_html called tempdev and I added symbolic links to each of the sibling directories listed above. My understanding of cPanel is that I can only assign one user with "Special FTP Access" per domain. I really dont want to give a complete stranger my login creds, (its just a development environment but still). So I used the cPanel FTP account creator UI. It will not allow me to assign the user access to the directories outside of public_html. I cant even give access to public_html either. So I made the tempdev directory in www and created the symlinks. Using the new account, I can see the symlinks, but I can go into them. Is there a better way to accomplish what I am attempting?

  Read the article

• Disable Windows 7 taskbar grouping. Not combining.

  - by Byran

  I've look near and far but I cannot find a way (setting or hack) to prevent Windows 7 from grouping taskbar buttons together that are "related". I'm not talking about the option to combine or collapse related buttons into one item. I can find that setting at: Taskbar and Start Menu Properties Taskbar Taskbar buttons: This is what I an not looking for: How to Enable or Disable Windows 7 Taskbar Button Grouping I'm talking about how Windows 7 seams to think that it's doing me a favor by grouping all my Google Chrome buttons together and grouping all my Explorer buttons together etc. My workflow in Windows XP was to use the program Taskbar Shuffle to allow me to reorganize my taskbar buttons into related task "groups" I was working on. For example: [Start Button] | [iTunes] [Outlook Express] [Chrome Gmail] [layered design folder] [Photoshop CS4] [exported images folder] [website root folder] [Dreamweaver CS4] [Chrome www.MyAwesomeWebsiteImBuilding.com] [Chrome Recent web search] [some unrelated folder] Windows 7 doesn't seem to let me do this. It wants to do: [Start Button] | [layered design folder][exported images folder][website root folder][some unrelated folder] | [Chrome www.MyAwesomeWebsiteImBuilding.com]Chrome [Gmail][Chrome Recent web search] | [iTunes] | [Outlook Express] | [Photoshop CS4] | [Dreamweaver CS4] Does anyone know of a tool or hack to prevent Windows 7 from grouping taskbar buttons?

  Read the article

< Previous Page | 269 270 271 272 273 274 275 276 277 278 279 280  | Next Page >