Search Results

Search found 10402 results on 417 pages for 'pc maintenance'.

Page 275/417 | < Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >

• Smartcards for storing gpg/ssh keys (Linux) - what do I need?

  - by Ninefingers

  Hi All, I'm interested in storing my SSH keys and gpg keys on a smartcard for added security. However, I'm a bit uncertain on a few points, which are as follows: How many keys can I get on a card? I assume both SSH and GPG can store keys on the card. Is there a limit to key size? I see a lot of cards saying they support 2048-bit keys, what about larger sizes? Hardware: can anyone recommend a card/reader combination that works well? I've done a fair amount of research and it seems PC/SC readers can be a bit iffy - is this your experience? Have I missed anything I should be asking? Are there any other hurdles? I'm aware fsf europe give away cards with membership - I'm not sure I want to join, but... are these cards any good?

  Read the article

• Is anyone else using OpenBSD as a router in the enterprise? What hardware are you running it on?

  - by Kamil Kisiel

  We have an OpenBSD router at each of our locations, currently running on generic "homebrew" PC hardware in a 4U server case. Due to reliability concerns and space considerations we're looking at upgrading them to some proper server-grade hardware with support etc. These boxes serve as the routers, gateways, and firewalls at each site. At this point we're quite familiar with OpenBSD and Pf, so hesitant at moving away from the system to something else such as dedicated Cisco hardware. I'm currently thinking of moving the systems to some HP DL-series 1U machines (model yet to be determined). I'm curious to hear if other people use a setup like this in their business, or have migrated to or away from one.

  Read the article

• Short USB cables not charging?

  - by tropolite

  I find this a strange problem but I can't find anything online about it. Recently I purchased a few short USB cables (20-30cm), to use in my car's USB connector to charge my phone. Strangely an older longer USB cable (1.2m), charges the phone fine (and the icon changes to show charging). With any of the short cables in the same USB slot no charging happens. Both the long and the short cables are USB2 compatible. I naturally assumed the short cables were faulty but connecting them to a PC or connecting to a high capacity external battery charging is successful using all the short cables and longer cables. Hopefully someone here is able to give me an explanation of the problem and how I can overcome this and use a short cable where it is most appropriate. Thanks

  Read the article

• Is proprietary vendor software required to use a wireless printer?

  - by sajee

  On Windows Vista, other than the driver, one can use a regular printer w/o any extra software, either plugged in via USB or over the network. I don't have to install extra software from the printer vendor to use the basic printer functionality. Is the same true for wireless printers? I need to install the HP 6000 wireless printer, and I hate installing vendor software other than the required drivers. So I'm wondering whether I need to install HP software on every PC that wants to use this printer? I haven't had a chance to read the manual but I'm hoping I don't have to. Can folks that have experience with wireless printers comment on whether vendor software, other than the printer driver, is required to use a wireless printer?

  Read the article

• Trying to install wordpress inside rails app with nginx and fastcgi

  - by pinouchon

  I have a rails app (let's call it myapp) running at www.myapp.com. I want to add a wordpress blog at www.myapp.com/blog. The webserver for the rails app is thin (see the upstream block). The wordpress runs with php-fastcgi. The rails app works fine. My problem is the following: in /home/myapp/myapp/log/error.log error I get: 2013/06/24 10:19:40 [error] 26066#0: *4 connect() failed (111: Connection refused) while connecti\ ng to upstream, client: xx.xx.138.20, server: www.myapp.com, request: "GET /blog/ HTTP/1.1", \ upstream: "fastcgi://127.0.0.1:9000", host: "www.myapp.com" Here is the nginx conf file: upstream myapp { server unix:/tmp/thin_myapp.0.sock; server unix:/tmp/thin_myapp.1.sock; server unix:/tmp/thin_myapp2.sock; } server { listen 80; server_name www.myapp.com; client_max_body_size 20M; access_log /home/myapp/myapp/log/access.log; error_log /home/myapp/myapp/log/error.log error; root /home/myapp/myapp/public; index index.html; location / { proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; # Index HTML Files if (-f $document_root/cache/$uri/index.html) { rewrite (.*) /cache/$1/index.html break; } if (!-f $request_filename) { proxy_pass http://myapp; break; } # try_files /system/maintenance.html $uri $uri/index.html $uri.html @ruby; } location /blog/ { root /var/www/wordpress; fastcgi_index index.php; if (!-e $request_filename) { rewrite ^(.*)$ /blog/index.php?q=$1 last; } include /etc/nginx/fastcgi_params; fastcgi_param SCRIPT_FILENAME /var/www/wordpress$fastcgi_script_name; fastcgi_pass localhost:9000; # port to FastCGI } } Any ideas why that doesn't work ? How do I make sure that php-factcgi is configured properly ? Edit: I cant test if fastcgi is running with telnet: $> telnet 127.0.0.1 9000 Trying 127.0.0.1... telnet: Unable to connect to remote host: Connection refused And it's not.

  Read the article

• Is the motherboard the cause of these errors?

  - by ianfuture

  Motherboard is : ASUS A7N8X-E Deluxe, Rev1.01, On start up get: "cmos checksum error - defaults loaded" error BIOS is reset everytime and can't boot to Windows off HDD. POST report is ok once I tell it there is no Floppy drive attached and not to seek it. The boot sequence starts then just as get to load windows safe mode options whole PC shuts down. BIOS is reset to defaults again. I've checked the battery and jumpers. Tried a known working battery. Changed Graphics card, changed memory, changed HD to one without an OS. Disconnected DVD drive. PSU is known to be ok. IN BIOS CPU is recognised correctly and memory is also recognised ok. So is it likely to be a bad motherboard or corrupted BIOS or something else? Thanks :)

  Read the article

• USB to HDMI using just a cable

  - by Nirmal

  I got a cable which has a USB point on one side and an HDMI point on the other side. I was under an impression that I could watch movies from my computer if I connect my computer to the TV using this cable. But looks like I was wrong. Does anyone know if such cable need some driver to make it work? Thanks for any input. (My computer is a Dell All-in-one PC which cannot take an extra graphic card. That's why I am trying my luck with such a cable.)

  Read the article

• USB resets with Ubuntu 9.10

  - by Grumbel

  Since the upgrade to Ubuntu 9.10 I have issues with getting USB device resets on my Maxtor OneTouch USB harddrive: Nov 9 20:54:37 localhost kernel: [32459.100021] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 21:54:37 localhost kernel: [36059.100017] usb 2-2: reset high speed USB device using ehci_hcd and address 4 Nov 9 23:24:37 localhost kernel: [41459.112025] usb 2-2: reset high speed USB device using ehci_hcd and address 4 The device itself continues to work fine, the resets however wake the device out of its sleep state and thus cause it to spin up, which is very annoying. Interestingly, as the log shows, the resets happen at pretty regular intervals (i.e. one hour or half an hour), not randomly. An USB card reader seems to have the same issues, while another USB harddrive from a different manufactor works fine on the same PC. What could be causing this and how could I fix it?

  Read the article

• Virus sending phishing emails through exchange server

  - by therulebookman

  It appears that there is a virus on my network somewhere that is sending phishing emails through my exchange server. I can see the messages in message tracking and I see many SMTP errors for NDR's and rejected connections from external servers, but I do not see any SMTP authentications and I have logging up to MAX. How can I find the IP or hostname of the PC that is infected? Or is there some other explanation than virus? Anti-virus scan on server is clean. Server is not an open relay. Thanks

  Read the article

• Error in Windows 7 after watching a MOV file

  - by JosephStyons

  Ever since watching a .MOV file with Windows Media Player on my pc, I am sporadically getting the below error. Does anyone know the cause of this, or a good way to fix it? This link has a hotfix, but it only applies to Windows XP. --------------------------- Microsoft Visual C++ Runtime Library --------------------------- Runtime Error! Program: C:\Windows\system32\DllHost.exe This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information. --------------------------- OK --------------------------- I am running Windows 7 with all updates installed.

  Read the article

• wmic output well formed xml on remote queries

  - by Mervin

  I want to use the WMI command line tool (wmic) to get information about windows computers on the network and output it as valid xml. However, I can't seem to find the right way to do this as the outputted xml currently contains invalid tokens for which I think I should use the /TRANSLATE:basicxml switch. The command: wmic /NODE:"tech-demo" /IMPLEVEL:Impersonate /USER:MyUser /PASSWORD:MyPassword /PRIVILEGES:DISABLE /AUTHLEVEL:Pkt /AUTHORITY:"ntlmdomain:companydomain.local" PATH Win32_LogicalDisk GET * /FORMAT:rawxml This command runs but returns invalid xml tokens ('<' and '' I think? edit: it appears to fail parsing at ‹) When I add the translate switch I get the message: Can not use credentials for local connections a bit strange that it tries to query the local pc when I add the switch.. Help would be greatly appreciated.

  Read the article

• Have a legitimate Windows 7 license and the Windows 7 key but don't have the DVD

  - by sonicboom

  I just booted up my 'old' PC that's been lying around for the last two years. I have Windows 7 on it and I'm looking to format the drive and do a fresh install of W7. I have the key for Windows 7 in a text file. However I don't have the Windows 7 DVD or image. So is there any way of burning off a Windows 7 DVD considering that its the operating system I'm currently using? If not...well I have a W7 key, will this key work with any W7 DVD or is it particular to the W7 image that came with the key?

  Read the article

• Xperia handset - cannot send files using bluetooth

  - by Sandeepan Nath

  My friend has a Sony Ericsson Xperia (most probably X8) handset which is an Android based smartphone. He is not able to send files through bluetooth but able to receive. I don't exactly remember the version of Android which he is currently having. He has tried to download and install the required update using the same phone (he has internet connected) from http://www.sonyericsson.com but not able to install it. So, he asked me to help him. Which version of Android do you think he has? Does it seem like he does not have Android 2.1 installed. It is written here (click on Xperia X8) that If your phone already has Android 2.1, you can use your mobile network* or a WiFi connection to download the software. Is it possible that he does not have updated Android and so not able to download? If so, does he need to upgrade to Android 2.1 first? Should it be done by connecting it to a PC?

  Read the article

• Recommend Online password manager [closed]

  - by Dmitriy Nagirnyak

  Possible Duplicate: online password manager with sharing capabilities Hi, I am looking for a good online password manager with the following requirements: Single click login from browser. Single click form saving from the browser. Not attached to a single PC. Offline version (so I can use it if there is no internet, for example plug USB and have last sync-ed data). Ability to store plain text (notes, for example). Should work on Windows, Linux and Mac. So far I have been happy with RoboForm, but its offline USB version is not available on Linux. Please recommend. Thanks, Dmitriy.

  Read the article

• P2V using Acronis True Image Home 10 and Windows 7

  - by Anthony

  I have a full system image using Acronis True Image Home 10 and want to run it as a virtual machine on Windows 7 Professional. I have created a virtual machine but Windows Virtual PC doesn't allow access to a USB external hard disk when booting from the Acronis Recovery CD. I've copied the backup onto the host machine and I can access it via the network using the Acronis boot CD but I'm wondering if there is an easier way? Does any other free Virtual Machine software support USB devices during boot (i.e. I can restore a backup image from the USB hard disk directly)

  Read the article

• How to "restart/repair" an USB port?

  - by Click Ok

  My laptop has two USB ports, but one is broken, so I use a USB hub in the other good USB port. In that USB hub, I use a mouse and keyboard. Suddenly, that USB port doesn't detect the mouse and the keyboard (even with the light of the hub is on), and the only solution that I found is restarting the laptop. But just some minutes and the keyboard and mouse goes undetected again... Is there some method, software, etc. to "restart/repair" the USB port without restarting the PC?

  Read the article

• acessing a subnetwork from within a vm

  - by yan bellavance

  I have a pc running windows 7. I have vmwareplayer running RHEL5 I have 1 physical ethernet connection. this ethernet connection is wired to a hub. there is another device on that hub that needs to be in a certain subnetwork (192.168.0.xxx)(lets call him device X) but the general network is 192.168.1.xxx How can I configure the network adapters so that I can ping device X from RHEL5 in the vm. Originally I could ping google from both windows and rhel (I was in the .1 network) but not device X since he is on a different subnetwork address. Now that I have put it on the .0 I can ping device X from windows but not from rhel5 and cannot access the web. I did this by manually setting the IP address.

  Read the article

• External hard drive encryption

  - by Kragen

  I've got a complete backup of my main PC on 1.5 TB external hard drive that I carry around with my laptop so I can have access to all of my files while I'm on the move, however it has just dawned on me that if someone nicks my external hard drive they now have access to everything! Hence I'm looking for a way to encrypt my external hard drive. I'm after something that is: Secure (if I need to carry around a USB dongle to keep the key on so be it) Fast (the performance of the drive should still be reasonable) Cross-platform (I regularly use other peoples computers - Sometimes they are not windows based and might not even have internet access, however I still want to be able to access my files) Cheap (preferably free / open source!)

  Read the article

• Blinking motherboard power LED

  - by Corey D

  I was just rebuilding an old desktop PC to be used as a HTPC and the LED on the motherboard that indicates when there is power is blinking fairly rapidly. The only way I can get the machine to boot is to press the power button immediately after plugging it in, and even then I cannot make it into the BIOS. The power supply has more than enough juice to power all of the components, and is from a reputable manufacturer. The motherboard is an Asus and is about 4.5 years old. Is my power supply hosed? Or is it my motherboard?

  Read the article

• squid3 auth thru samba using ntlm to AD doesn't work

  - by derty

  some users here are spending to much time exploring the WWW. So big boss whats to get this under control. We use a squid3 just for some security reason and chace benefits. and now i'm trying to set up a new proxy on a different server (Debian 6) Permissions are defined in AC and the squid3 should get the auth thru samba/winbind by using the ntlm protocol. but i'll get all the time Access, denited. it only works by using LDAP but thats not the way i need it. here some log and confs squid access.log 1326878095.784 1 192.168.15.27 TCP_DENIED/407 4049 GET http://at.msn.com/? -NONE/- text/html 1326878095.791 1 192.168.15.27 TCP_DENIED/407 4294 GET http://at.msn.com/? - NONE/- text/html 1326878095.803 9 192.168.15.27 TCP_DENIED/403 4028 GET http://at.msn.com/? kavan NONE/- text/html 1326878095.848 0 192.168.15.27 TCP_DENIED/403 3881 GET http://www.squid-cache.org/Artwork/SN.png kavan NONE/- text/html 1326878100.279 0 192.168.15.27 TCP_DENIED/403 3735 GET http://www.google.at/ kavan NONE/- text/html 1326878100.296 0 192.168.15.27 TCP_DENIED/403 3870 GET http://www.squid-cache.org/Artwork/SN.png kavan NONE/- text/html 1326878155.700 0 192.168.15.27 TCP_DENIED/407 4072 GET http://ie9cvlist.ie.microsoft.com/IE9CompatViewList.xml - NONE/- text/html 1326878155.705 2 192.168.15.27 TCP_DENIED/407 4317 GET http://ie9cvlist.ie.microsoft.com/IE9CompatViewList.xml - NONE/- text/html 1326878155.709 3 192.168.15.27 TCP_DENIED/403 4026 GET http://ie9cvlist.ie.microsoft.com/IE9CompatViewList.xml kavan NONE/- text/html squid chace 2012/01/18 10:12:49| Creating Swap Directories 2012/01/18 10:12:49| Starting Squid Cache version 3.1.6 for x86_64-pc-linux-gnu... 2012/01/18 10:12:49| Process ID 17236 2012/01/18 10:12:49| With 65535 file descriptors available 2012/01/18 10:12:49| Initializing IP Cache... 2012/01/18 10:12:49| DNS Socket created at [::], FD 7 2012/01/18 10:12:49| DNS Socket created at 0.0.0.0, FD 8 2012/01/18 10:12:49| Adding nameserver 192.168.15.2 from /etc/resolv.conf 2012/01/18 10:12:49| Adding nameserver 192.168.15.19 from /etc/resolv.conf 2012/01/18 10:12:49| Adding nameserver 192.168.15.1 from /etc/resolv.conf 2012/01/18 10:12:49| Adding domain schoenbrunn.local from /etc/resolv.conf 2012/01/18 10:12:49| helperOpenServers: Starting 5/5 'squid_ldap_auth' processes 2012/01/18 10:12:49| helperOpenServers: Starting 10/10 'ntlm_auth' processes 2012/01/18 10:12:49| helperOpenServers: Starting 10/10 'squid_kerb_auth' processes 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| helperOpenServers: Starting 5/5 'squid_ldap_group' processes 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| squid_kerb_auth: INFO: Starting version 1.0.5 2012/01/18 10:12:49| Unlinkd pipe opened on FD 73 2012/01/18 10:12:49| Local cache digest enabled; rebuild/rewrite every 3600/3600 sec 2012/01/18 10:12:49| Store logging disabled 2012/01/18 10:12:49| Swap maxSize 0 + 262144 KB, estimated 20164 objects 2012/01/18 10:12:49| Target number of buckets: 1008 2012/01/18 10:12:49| Using 8192 Store buckets 2012/01/18 10:12:49| Max Mem size: 262144 KB 2012/01/18 10:12:49| Max Swap size: 0 KB 2012/01/18 10:12:49| Using Least Load store dir selection 2012/01/18 10:12:49| Set Current Directory to /var/spool/squid3 2012/01/18 10:12:49| Loaded Icons. 2012/01/18 10:12:49| Accepting HTTP connections at [::]:3128, FD 74. 2012/01/18 10:12:49| HTCP Disabled. 2012/01/18 10:12:49| Squid modules loaded: 0 2012/01/18 10:12:49| Adaptation support is off. 2012/01/18 10:12:49| Ready to serve requests. 2012/01/18 10:12:50| storeLateRelease: released 0 objects smb.conf # Domain Authntication Settings workgroup = <WORKGROUP> security = ads password server = <DOMAINNAME>.LOCAL realm = <DOMAINNAME>.LOCAL ldap ssl = no # logging log level = 5 max log size = 50 # logs split per machine log file = /var/log/samba/%m.log # max 50KB per log file, then rotate ; max log size = 50 # User settings username map = /etc/samba/smbusers idmap uid = 10000-20000000 idmap gid = 10000-20000000 idmap backend = ad ; template primary group = <ad group> template shell = /sbin/nologin # Winbind Settings winbind separator = + winbind enum users = Yes winbind enum groups = Yes winbind netsted groups = Yes winbind nested groups = Yes winbind cache time = 10 winbind use default domain = Yes #Other Globals unix charset = LOCALE server string = <SERVERNAME> load printers = no printing = cups cups options = raw ; printcap name = /etc/printcap #obtain list of printers automatically on SystemV ; printcap name = lpstat ; printing = cups squid.conf auth_param ntlm program /usr/bin/ntlm_auth --require-membership-of=<DOMAINNAME>\\INTERNETZ --helper-protocol=squid-2.5-ntlmssp auth_param ntlm children 10 auth_param basic program /usr/lib/squid3/squid_ldap_auth -R -b "dc=<dcname>,dc=local" -D "cn=administrator,cn=Users,dc=<domainname>,dc=local" -w "******" -f sAMAccountName=%s -h 192.168.15.19:3268 auth_param basic realm "Proxy Authentifizierung. Bitte geben Sie Ihren Benutzername und Ihr Passwort ein!" #means insert you PW in an other language - # external_acl_type InetGroup %LOGIN /usr/lib/squid3/squid_ldap_group -R -b "dc=<domainname>,dc=local" -D "cn=administrator,cn=Users,dc=<domainname>,dc=local" -w "******" -f "(&(objectclass=person)(sAMAccountName=%v) (memberof=cn=%a,cn=internetz,dc=<domainname>,dc=local))" -h 192.168.15.19:3268 auth_param negotiate program /usr/lib/squid3/squid_kerb_auth -d auth_param negotiate children 10 auth_param negotiate keep_alive on acl localnet proxy_auth REQUIRED acl InetAccess external InetGroup Internetz http_access allow InetAccess http_access deny all acl auth proxy_auth REQUIRED http_access allow auth and a very suspicious is that by adding the proxy server to the Domain i see 2 new entries in the PC one with the original computer-name leopoldine and one with leopoldine CNF:f8efa4c4-ff0e-4217-939d-f1523b43464d ?!? I tried a lot, really... but i stuck on this problem... i actually i even reinstalled all dependent programs and reconfigured them from default. Group exists and has me in it. Firefox running on the old proxy and i use IE for testing the new one. But i'll get all the time Access-Denited and to be honest i'm quite a beginner, so please don't be to prude. I'll interested in improving, i'll get the information we need to fix this but i started working 2 month ago and got only 1 1/2 year's training and not a single sec. in linux ;)

  Read the article

• Prepare bootable Mac OS install usb on Windows

  - by Dave

  Hello, Is there any software out there that can simulate Disk Utility (Mac app) for Windows? I need to reinstall leopard on my Mac because I screwed something up on the current OS. The thing is, the DVD drive is broken on there, so I need to prepare a bootable USB drive from my Leopard DMG file. This is easily done with the Disk Utility app on the Mac. But seeing how my cannot even log on to my Mac right now, I don't know how to prepare that USB stick. The only other machine I have is a PC with Windows 7. If anyone has any suggestion, please help me out! Thanks so much!

  Read the article

• add printer on windows 7 with vbscript and wmi

  - by Jessica

  I have a problem where I can't add a printer on my Windows 7 machine, because it fails with "The printer driver is unknown" (error code 1797) using WMI/VBScript. The thing is that the printer driver already exists on the PC. I've used AddPrinterConnection to connect to the remote printer queue, and the drivers get installed. I've confirmed they exist by a) Enumerating Win32_PrinterDriver with WBEMTEST utility which shows the driver, and also in the Printer Management MMC snap-in. Is there some other scriptable way I can get this to work? I'm adding a local TCP/IP port, pointing my new printer object instance to use that port and the driver from using AddPrinterConnection, and giving it a name, but it refuses to work...

  Read the article

• How to establish the real-time communication between Shopping cart running MySQL and Internal System Running PostgreSQL [closed]

  - by Andrew

  I am thinking about the way of establishing some-sort of real-time connection between MySQLpowered shopping cart and internal system that is running on PostgreSQL. Could you give me some sort of insight on this topic? For example, I can write some sort of csv export application, then enable remote MySQL for over the internet connection and then import csv to mysql directly from PC. Or upload csv and run cron on server. But this way of import-export causing delays; so I would like to link databased (or some msort). I have never done it before and would like to hear some opinions about this. Another way "just a thought" might to implement triggers that would initiate the update process via csv; but again, I would like to avoid csv. Do you have any good advise? Maybe some specific examples?

  Read the article

• TrueCrypt Failing to Decrypt External Hard Drive after changing Enclosures

  - by Anx Ara

  I have a 4TB external hard drive that was previously encrypted using TrueCrypt. The power source on the hard drive enclosure failed, so I had to switch the hard drive itself into a new enclosure. I can no longer decrypt the hard drive using TrueCrypt, as it says my password is wrong. I am certain that I entering the correct password. Additionally, in TrueCrypt, when I try to mount the volume under "Select Device", it shows the following: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 465GB Whereas before I changed the enclosure it would show: Harddisk 5: 3.6TB Device\Harddisk5\Partition 1 H: 3.6TB I am on a Windows 8 PC and using TrueCrypt 7.1a. How can I get it to decrypt properly?

  Read the article

• Install Windows 8 from recovery disk on VirtualBox [on hold]

  - by user1032531

  About 6 months ago, I bought a desktop HP PC with Windows 8 from Costco. I made a recovery disk (actually, took 4 DVDs) of the operating system and copied down the product key. I then did a fresh Cento6 install on the machine. I know wish to operate Windows (8 I guess, but I would rather have 7) on a VirtualBox on the Centos box. Is this possible? Any recommendations where to start? Can I do so without re-installing all the HP baggage?

  Read the article

< Previous Page | 271 272 273 274 275 276 277 278 279 280 281 282  | Next Page >