Search Results

Search found 33227 results on 1330 pages for 'open stackoverflow'.

Page 276/1330 | < Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >

• Django ImageField issue with JPEG's

  - by Kieran Lynn

  I am having a major issue with PIL (Python Image Library) in Django and have jumpped through a lot of hoops and have thus far not been able to figure out what the root of the issue is. The problem essentially breaks down to not being able to upload JPEG images through the ImageField in the Django admin. But the issue is not as simple as installing libjpeg. First, I installed PIL (through Buildout) and realized once it was installed that I had not installed libjpeg because JPEG support was not available. Having not setup the server myself, I just assumed that it was not installed and I compiled libjpeg 8 from the source. This ended up in my /usr/local/lib/ directory. I cleared out my Buildout files and rebuilt everything. This time when PIL compiled I had JPEG support. But I went to the Django Admin and tried to upload a JPEG though an ImageField with no luck. I got the "Upload a valid image. The file you uploaded was either not an image or a corrupted image" error. Just as a test I opened up a the Djano shell and ran the following: > import Image > i = Image.open( "/absolute_path/file.jpg" ) > print i <JpegImagePlugin.JpegImageFile image mode=RGB size=940x375 at 0x7F908C529BD8> This runs with no errors and shows that PIL is able to open JPEG's. After doing some reading, I come across this thread: Is it possible to control which libraries apache uses? Looks like PHP also uses libjpeg and is loading before Django, and therefor loading libjpeg 6.2 before. This is show when using lsof: COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME apache2 2561 www-data mem REG 202,1 146032 639276 /usr/lib/libjpeg.so.62.0.0 So my thought is that I should be using libjpeg 6.2. So I removed libjpeg located in my /usr/local/lib directory. After rereading the PIL installation instructions, I realized that I might not have the dev/header files for libjpeg that PIL needs. So I also uninstalled libjpeg using the aptitude uninstaller (sudo aptitude remove libjpeg62). Then to ensure that I got the header files that PIL needed I installed libjpeg using aptitude: (sudo aptget install libjpeg62-dev). From here I cleaned out my Buildout directory, and reran Buildout, which in turn reinstalled PIL. Once again, I have JPEG support, now using the libjpeg62. So I go to test in the Django Admin. Still no JPEG support. So I wanted to test JPEG support in general and see if the exception was not handled, what kind of error it would throw. So in my homepage view I added the following code to open a JPEG image: import Image i = Image.open( "/absolute_path/file.jpg" ) v = i.verify() Then I pass i to the HTML view just to easily see the output. I deploy these changes to the server and restart. I am surprised not to see an error and get the following output: {{ i }} - <JpegImagePlugin.JpegImageFile image mode=RGB size=940x375 at 0x7F908C529BD8> {{ v }} - None So at this point I am really confused: Why can I successfully open a JPEG while the admin cannot? Am I missing something, is this not an issue with libjpeg? If not an issue with libjpeg, why can I upload a PNG with no issues? Any help would be much appreciated, I have been on this for 2 days debugging with no luck. Setup: 1. Rackspace Cloud Server 2. Ubuntu 10.04 3. Django 1.2.3 (Installed though Buildout) 4. PIL 1.1.7 (Installed though Buildout) 5. libjpeg 6.2 (installed through aptitude (sudo aptget install libjpeg62-dev)

  Read the article

• Ado.net Fill method not throwing error on running a Stored Procedure that does not exist.

  - by Mike

  I am using a combination of the Enterprise library and the original Fill method of ADO. This is because I need to open and close the command connection myself as I am capture the event Info Message Here is my code so far // Set Up Command SqlDatabase db = new SqlDatabase(ConfigurationManager.ConnectionStrings[ConnectionName].ConnectionString); SqlCommand command = db.GetStoredProcCommand(StoredProcName) as SqlCommand; command.Connection = db.CreateConnection() as SqlConnection; // Set Up Events for Logging command.StatementCompleted += new StatementCompletedEventHandler(command_StatementCompleted); command.Connection.FireInfoMessageEventOnUserErrors = true; command.Connection.InfoMessage += new SqlInfoMessageEventHandler(Connection_InfoMessage); // Add Parameters foreach (Parameter parameter in Parameters) { db.AddInParameter(command, parameter.Name, (System.Data.DbType)Enum.Parse(typeof(System.Data.DbType), parameter.Type), parameter.Value); } // Use the Old Style fill to keep the connection Open througout the population // and manage the Statement Complete and InfoMessage events SqlDataAdapter da = new SqlDataAdapter(command); DataSet ds = new DataSet(); // Open Connection command.Connection.Open(); // Populate da.Fill(ds); // Dispose of the adapter if (da != null) { da.Dispose(); } // If you do not explicitly close the connection here, it will leak! if (command.Connection.State == ConnectionState.Open) { command.Connection.Close(); } ... Now if I pass into the variable StoredProcName = "ThisProcDoesNotExists" And run this peice of code. The CreateCommand nor da.Fill through an error message. Why is this. The only way I can tell it did not run was that it returns a dataset with 0 tables in it. But when investigating the error it is not appearant that the procedure does not exist. EDIT Upon further investigation command.Connection.FireInfoMessageEventOnUserErrors = true; is causeing the error to be surpressed into the InfoMessage Event From BOL When you set FireInfoMessageEventOnUserErrors to true, errors that were previously treated as exceptions are now handled as InfoMessage events. All events fire immediately and are handled by the event handler. If is FireInfoMessageEventOnUserErrors is set to false, then InfoMessage events are handled at the end of the procedure. What I want is each print statement from Sql to create a new log record. Setting this property to false combines it as one big string. So if I leave the property set to true, now the question is can I discern a print message from an Error ANOTHER EDIT So now I have the code so that the flag is set to true and checking the error number in the method void Connection_InfoMessage(object sender, SqlInfoMessageEventArgs e) { // These are not really errors unless the Number >0 // if Number = 0 that is a print message foreach (SqlError sql in e.Errors) { if (sql.Number == 0) { Logger.WriteInfo("Sql Message",sql.Message); } else { // Whatever this was it was an error throw new DataException(String.Format("Message={0},Line={1},Number={2},State{3}", sql.Message, sql.LineNumber, sql.Number, sql.State)); } } } The issue now that when I throw the error it does not bubble up to the statement that made the call or even the error handler that is above that. It just bombs out on that line The populate looks like // Populate try { da.Fill(ds); } catch (Exception e) { throw new Exception(e.Message, e); } Now even though I see the calling codes and methods still in the Call Stack, this exception does not seem to bubble up?

  Read the article

• How can I get SQL Server transactions to use record-level locks?

  - by Joe White

  We have an application that was originally written as a desktop app, lo these many years ago. It starts a transaction whenever you open an edit screen, and commits if you click OK, or rolls back if you click Cancel. This worked okay for a desktop app, but now we're trying to move to ADO.NET and SQL Server, and the long-running transactions are problematic. I found that we'll have a problem when multiple users are all trying to edit (different subsets of) the same table at the same time. In our old database, each user's transaction would acquire record-level locks to every record they modified during their transaction; since different users were editing different records, everyone gets their own locks and everything works. But in SQL Server, as soon as one user edits a record inside a transaction, SQL Server appears to get a lock on the entire table. When a second user tries to edit a different record in the same table, the second user's app simply locks up, because the SqlConnection blocks until the first user either commits or rolls back. I'm aware that long-running transactions are bad, and I know that the best solution would be to change these screens so that they no longer keep transactions open for a long time. But since that would mean some invasive and risky changes, I also want to research whether there's a way to get this code up and running as-is, just so I know what my options are. How can I get two different users' transactions in SQL Server to lock individual records instead of the entire table? Here's a quick-and-dirty console app that illustrates the issue. I've created a database called "test1", with one table called "Values" that just has ID (int) and Value (nvarchar) columns. If you run the app, it asks for an ID to modify, starts a transaction, modifies that record, and then leaves the transaction open until you press ENTER. I want to be able to start the program and tell it to update ID 1; let it get its transaction and modify the record; start a second copy of the program and tell it to update ID 2; have it able to update (and commit) while the first app's transaction is still open. Currently it freezes at step 4, until I go back to the first copy of the app and close it or press ENTER so it commits. The call to command.ExecuteNonQuery blocks until the first connection is closed. public static void Main() { Console.Write("ID to update: "); var id = int.Parse(Console.ReadLine()); Console.WriteLine("Starting transaction"); using (var scope = new TransactionScope()) using (var connection = new SqlConnection(@"Data Source=localhost\sqlexpress;Initial Catalog=test1;Integrated Security=True")) { connection.Open(); var command = connection.CreateCommand(); command.CommandText = "UPDATE [Values] SET Value = 'Value' WHERE ID = " + id; Console.WriteLine("Updating record"); command.ExecuteNonQuery(); Console.Write("Press ENTER to end transaction: "); Console.ReadLine(); scope.Complete(); } } Here are some things I've already tried, with no change in behavior: Changing the transaction isolation level to "read uncommitted" Specifying a "WITH (ROWLOCK)" on the UPDATE statement

  Read the article

• Listening for TCP and UDP requests on the same port

  - by user339328

  I am writing a Client/Server set of programs Depending on the operation requested by the client, I use make TCP or UDP request. Implementing the client side is straight-forward, since I can easily open connection with any protocol and send the request to the server-side. On the servers-side, on the other hand, I would like to listen both for UDP and TCP connections on the same port. Moreover, I like the the server to open new thread for each connection request. I have adopted the approach explained in: link text I have extended this code sample by creating new threads for each TCP/UDP request. This works correctly if I use TCP only, but it fails when I attempt to make UDP bindings. Please give me any suggestion how can I correct this. tnx Here is the Server Code: public class Server { public static void main(String args[]) { try { int port = 4444; if (args.length > 0) port = Integer.parseInt(args[0]); SocketAddress localport = new InetSocketAddress(port); // Create and bind a tcp channel to listen for connections on. ServerSocketChannel tcpserver = ServerSocketChannel.open(); tcpserver.socket().bind(localport); // Also create and bind a DatagramChannel to listen on. DatagramChannel udpserver = DatagramChannel.open(); udpserver.socket().bind(localport); // Specify non-blocking mode for both channels, since our // Selector object will be doing the blocking for us. tcpserver.configureBlocking(false); udpserver.configureBlocking(false); // The Selector object is what allows us to block while waiting // for activity on either of the two channels. Selector selector = Selector.open(); tcpserver.register(selector, SelectionKey.OP_ACCEPT); udpserver.register(selector, SelectionKey.OP_READ); System.out.println("Server Sterted on port: " + port + "!"); //Load Map Utils.LoadMap("mapa"); System.out.println("Server map ... LOADED!"); // Now loop forever, processing client connections while(true) { try { selector.select(); Set<SelectionKey> keys = selector.selectedKeys(); // Iterate through the Set of keys. for (Iterator<SelectionKey> i = keys.iterator(); i.hasNext();) { SelectionKey key = i.next(); i.remove(); Channel c = key.channel(); if (key.isAcceptable() && c == tcpserver) { new TCPThread(tcpserver.accept().socket()).start(); } else if (key.isReadable() && c == udpserver) { new UDPThread(udpserver.socket()).start(); } } } catch (Exception e) { e.printStackTrace(); } } } catch (Exception e) { e.printStackTrace(); System.err.println(e); System.exit(1); } } } The UDPThread code: public class UDPThread extends Thread { private DatagramSocket socket = null; public UDPThread(DatagramSocket socket) { super("UDPThread"); this.socket = socket; } @Override public void run() { byte[] buffer = new byte[2048]; try { DatagramPacket packet = new DatagramPacket(buffer, buffer.length); socket.receive(packet); String inputLine = new String(buffer); String outputLine = Utils.processCommand(inputLine.trim()); DatagramPacket reply = new DatagramPacket(outputLine.getBytes(), outputLine.getBytes().length, packet.getAddress(), packet.getPort()); socket.send(reply); } catch (IOException e) { e.printStackTrace(); } socket.close(); } } I receive: Exception in thread "UDPThread" java.nio.channels.IllegalBlockingModeException at sun.nio.ch.DatagramSocketAdaptor.receive(Unknown Source) at server.UDPThread.run(UDPThread.java:25) 10x

  Read the article

• Fastest way to read data from a lot of ASCII files

  - by Alsenes

  Hi guys, for a college exercise that I've already submitted I needed to read a .txt file wich contained a lot of names of images(1 in each line). Then I needed to open each image as an ascii file, and read their data(images where in ppm format), and do a series of things with them. The things is, I noticed my program was taking 70% of the time in the reading the data from the file part, instead of in the other calculations that I was doing (finding number of repetitions of each pixel with a hash table, finding diferents pixels beetween 2 images etc..), which I found quite odd to say the least. This is how the ppm format looks like: P3 //This value can be ignored when reading the file, because all image will be correctly formatted 4 4 255 //This value can be also ignored, will be always 255. 0 0 0 0 0 0 0 0 0 15 0 15 0 0 0 0 15 7 0 0 0 0 0 0 0 0 0 0 0 0 0 15 7 0 0 0 15 0 15 0 0 0 0 0 0 0 0 0 This is how I was reading the data from the files: ifstream fdatos; fdatos.open(argv[1]); //Open file with the name of all the images const int size = 128; char file[size]; //Where I'll get the image name Image *img; while (fdatos >> file) { //While there's still images anmes left, continue ifstream fimagen; fimagen.open(file); //Open image file img = new Image(fimagen); //Create new image object with it's data file ……… //Rest of the calculations whith that image ……… delete img; //Delete image object after done fimagen.close(); //Close image file after done } fdatos.close(); And inside the image object read the data like this: const int tallafirma = 100; char firma[tallafirma]; fich_in >> std::setw(100) >> firma; // Read the P3 part, can be ignored int maxvalue, numpixels; fich_in >> height >> width >> maxvalue; // Read the next three values numpixels = height*width; datos = new Pixel[numpixels]; int r,g,b; //Don't need to be ints, max value is 256, so an unsigned char would be ok. for (int i=0; i<numpixels; i++) { fich_in >> r >> g >> b; datos[i] = Pixel( r, g ,b); } //This last part is the slow one, //I thing I should be able to read all this data in one single read //to buffer or something which would be stored in an array of unsigned chars, //and then I'd only need to to do: //buffer[0] -> //Pixel 1 - Red data //buffer[1] -> //Pixel 1 - Green data //buffer[2] -> //Pixel 1 - Blue data So, any Ideas? I think I can improve it quite a bit reading all to an array in one single call, I just don't know how that is done. Also, is it posible to know how many images will be in the "index file"? Is it posiible to know the number of lines a file has?(because there's one file name per line..) Thanks!!

  Read the article

• Override `drop` for a custom sequence

  - by Bruno Reis

  In short: in Clojure, is there a way to redefine a function from the standard sequence API (which is not defined on any interface like ISeq, IndexedSeq, etc) on a custom sequence type I wrote? 1. Huge data files I have big files in the following format: A long (8 bytes) containing the number n of entries n entries, each one being composed of 3 longs (ie, 24 bytes) 2. Custom sequence I want to have a sequence on these entries. Since I cannot usually hold all the data in memory at once, and I want fast sequential access on it, I wrote a class similar to the following: (deftype DataSeq [id ^long cnt ^long i cached-seq] clojure.lang.IndexedSeq (index [_] i) (count [_] (- cnt i)) (seq [this] this) (first [_] (first cached-seq)) (more [this] (if-let [s (next this)] s '())) (next [_] (if (not= (inc i) cnt) (if (next cached-seq) (DataSeq. id cnt (inc i) (next cached-seq)) (DataSeq. id cnt (inc i) (with-open [f (open-data-file id)] ; open a memory mapped byte array on the file ; seek to the exact position to begin reading ; decide on an optimal amount of data to read ; eagerly read and return that amount of data )))))) The main idea is to read ahead a bunch of entries in a list and then consume from that list. Whenever the cache is completely consumed, if there are remaining entries, they are read from the file in a new cache list. Simple as that. To create an instance of such a sequence, I use a very simple function like: (defn ^DataSeq load-data [id] (next (DataSeq. id (count-entries id) -1 []))) ; count-entries is a trivial "open file and read a long" memoized As you can see, the format of the data allowed me to implement count in very simply and efficiently. 3. drop could be O(1) In the same spirit, I'd like to reimplement drop. The format of these data files allows me to reimplement drop in O(1) (instead of the standard O(n)), as follows: if dropping less then the remaining cached items, just drop the same amount from the cache and done; if dropping more than cnt, then just return the empty list. otherwise, just figure out the position in the data file, jump right into that position, and read data from there. My difficulty is that drop is not implemented in the same way as count, first, seq, etc. The latter functions call a similarly named static method in RT which, in turn, calls my implementation above, while the former, drop, does not check if the instance of the sequence it is being called on provides a custom implementation. Obviously, I could provide a function named anything but drop that does exactly what I want, but that would force other people (including my future self) to remember to use it instead of drop every single time, which sucks. So, the question is: is it possible to override the default behaviour of drop? 4. A workaround (I dislike) While writing this question, I've just figured out a possible workaround: make the reading even lazier. The custom sequence would just keep an index and postpone the reading operation, that would happen only when first was called. The problem is that I'd need some mutable state: the first call to first would cause some data to be read into a cache, all the subsequent calls would return data from this cache. There would be a similar logic on next: if there's a cache, just next it; otherwise, don't bother populating it -- it will be done when first is called again. This would avoid unnecessary disk reads. However, this is still less than optimal -- it is still O(n), and it could easily be O(1). Anyways, I don't like this workaround, and my question is still open. Any thoughts? Thanks.

  Read the article

• Opening a file with a variable as name and checking for undefined values

  - by Harm De Weirdt

  I'm having some problems writing data into a file using Perl. sub startNewOrder{ my $name = makeUniqueFileName(); open (ORDER, ">$name.txt") or die "can't open file: $!\n"; format ORDER_TOP = PRODUCT<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<CODE<<<<<<<<AANTAL<<<<EENHEIDSPRIJS<<<<<<TOTAAL<<<<<<< . format ORDER = @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @<<<<<<<< @<<<< @<<<<<< @<<<<< $title, $code, $amount, $price, $total . close (ORDER); } This is the sub I use to make the file. (I translated most of it.) The makeUniqueFileName method makes a fileName based upon current time("minuteshoursdayOrder"). The problem now is that I have to write to this file in another sub. sub addToOrder{ print "give productcode:"; $code = <STDIN>; chop $code; print "Give amount:"; $amount = <STDIN>; chop $amount; if($inventory{$code} eq undef){ #Does the product exist? print "This product does not exist"; }elsif($inventory{$code}[2] < $amount && !defined($inventaris{$code}[2]) ){ #Is there enough in the inventory? print "There is not enough in stock" }else{ $inventory{$code}[2] -= $amount; #write in order file open (ORDER ">>$naam.txt") or die "can't open file: $!\n"; $title = $inventory{$code}[0]; $code = $code; $amount = $inventory{$code}[2]; $price = $inventory{$code}[1]; $total = $inventory{$code}[1]; write; close(ORDER); } %inventory is a hashtable that has the productcode as key and an array with the title, price and amount as value. There are two problems here: when I enter an invalid product number, I still have to enter an amount even while my code says it should print the error directly after checking if there is a product with the given code. The second problem is that the writing doesn't seem to work. It always give's a "No such file or directory" error. Is there a way to open the ORDER file I made in the first sub without having to make $name not local? Or just a way to write in this file? I really don't know how to start here. I can't really find much info on writing a file that has been closed before, and in a different sub. Any help is appreciated, Harm

  Read the article

• Opening a file with a variable as name & checking for undefined values

  - by Harm De Weirdt

  Hello everyone. I'm having some problems writing data into a file using perl. sub startNewOrder{ my $name = makeUniqueFileName(); open (ORDER, ">$name.txt") or die "can't open file: $!\n"; format ORDER_TOP = PRODUCT<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<CODE<<<<<<<<AANTAL<<<<EENHEIDSPRIJS<<<<<<TOTAAL<<<<<<< . format ORDER = @<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< @<<<<<<<< @<<<< @<<<<<< @<<<<< $title, $code, $amount, $price, $total . close (ORDER); } This is the sub I use to make the file. (I translated most of it) The makeUniqueFileName method makes a fileName based upon current time("minuteshoursdayOrder"). The problem now is that I have to write in this file in another sub. sub addToOrder{ print "give productcode:"; $code = <STDIN>; chop $code; print "Give amount:"; $amount = <STDIN>; chop $amount; if($inventory{$code} eq undef){ #Does the product exist? print "This product does not exist"; }elsif($inventory{$code}[2] < $amount && !defined($inventaris{$code}[2]) ){ #Is there enough in the inventory? print "There is not enough in stock" }else{ $inventory{$code}[2] -= $amount; #write in order file open (ORDER ">>$naam.txt") or die "can't open file: $!\n"; $title = $inventory{$code}[0]; $code = $code; $amount = $inventory{$code}[2]; $price = $inventory{$code}[1]; $total = $inventory{$code}[1]; write; close(ORDER); } %inventory is a hashtable that has the productcode as key and an array with the title, price and amount as value. There are two problems here: when I enter an invalid product number, I still have to enter an amount even while my code says it should print the error directly after checking if there is a product with the given code. The second problem is that the writing doesn't seem to work. It always give's a "No such file or directory" error. Is there a way to open the ORDER file i made in the first sub without having to make $name not local? Or just a way to write in this file? I really don't know how to start here. I can't really find much info on writing a file that has been closed before, and in a different sub.. Any help is appreciated, Harm

  Read the article

• Do SEO-friendly URLs really affect a page's ranking?

  - by Lee Harold

  SEO-friendly URLs are all the rage these days. But do they actually have a meaningful impact on a page's ranking in Google and other search engines? If so, why? If not, why not? (Note that I would absolutely agree that SEO-friendly URLs are nicer to use for human beings. My question is whether they actually make a difference to the ranking algorithms.) Update: As it turns out, the Google post that endorphine points to here has caused tremendous confusion in the SEO community. For a sampling of the discussion, see here, here, and here. Part of the problem is that the Google post is addressing the worst case where URL rewriting is done poorly and so you'd be better off sticking with a dynamic URL rather than a mangled static "SEO-friendly" URL. There's no question dynamic URLs can be crawled by Google and can achieve high rankings. Maybe it would be easier to reframe the question more concretely: given 2 otherwise equivalent pages, which will rank higher for the search "do seo friendly urls really affect page ranking"? A) http://stackoverflow.com/questions/505793/do-seo-friendly-urls-really-affect-a-pages-ranking or B) http://stackoverflow.com?question=505793 (a fake URL for comparison only)

  Read the article

• Reading non-standard elements in a SyndicationItem with SyndicationFeed

  - by Jared

  With .net 3.5, there is a SyndicationFeed that will load in a RSS feed and allow you to run LINQ on it. Here is an example of the RSS that I am loading: <rss version="2.0" xmlns:media="http://search.yahoo.com/mrss/"> <channel> <title>Title of RSS feed</title> <link>http://www.google.com</link> <description>Details about the feed</description> <pubDate>Mon, 24 Nov 08 21:44:21 -0500</pubDate> <language>en</language> <item> <title>Article 1</title> <description><![CDATA[How to use StackOverflow.com]]></description> <link>http://youtube.com/?v=y6_-cLWwEU0</link> <media:player url="http://youtube.com/?v=y6_-cLWwEU0" /> <media:thumbnail url="http://img.youtube.com/vi/y6_-cLWwEU0/default.jpg" width="120" height="90" /> <media:title>Jared on StackOverflow</media:title> <media:category label="Tags">tag1, tag2</media:category> <media:credit>Jared</media:credit> <enclosure url="http://youtube.com/v/y6_-cLWwEU0.swf" length="233" type="application/x-shockwave-flash"/> </item> </channel> When I loop through the items, I can get back the title and the link through the public properties of SyndicationItem. I can't seem to figure out how to get the attributes of the enclosure tag, or the values of the media tags. I tried using SyndicationItem.ElementExtensions.ReadElementExtensions<string>("player", "http://search.yahoo.com/mrss/") Any help with either of these?

  Read the article

• Crystal Reports Images not loading in ASP.NET MVC

  - by Ryan Shripat

  I'm using Crystal Reports in a Webform inside of an MVC application. Images in the reports are not being displayed, however, on both the ASP.NET Development Server and IIS 7 (on Win7x64). I know from a number of other questions similar to this that the CrystalImageHandler HTTP Handler is responsible for rendering the image, but I've tried all of the usual solutions to no avail. So far, I have Added the following to my appSettings (via http://www.mail-archive.com/[email protected]/msg26882.html) <add key="CrystalImageCleaner-AutoStart" value="true" /> <add key="CrystalImageCleaner-Sleep" value="60000" /> <add key="CrystalImageCleaner-Age" value="120000" /> Added the following httpHandler to system.web/httpHandlers (via http://stackoverflow.com/questions/2253682/crystal-report-viewer-control-isnt-loading-the-images-inside-the-report) <add verb="GET" path="CrystalImageHandler.aspx" type="CrystalDecisions.Web.CrystalImageHandler, CrystalDecisions.Web, Version=12.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"/> Added the following to my Global.asax.cs (via http://stackoverflow.com/questions/2006011/crystal-reports-images-and-asp-net-mvc) routes.IgnoreRoute("{resource}.aspx/{*pathInfo}"); and routes.IgnoreRoute("CrystalImageHandler.aspx"); Any ideas as to why the images still 404?

  Read the article

• Getting Response from TIdHttp with Error Code 400

  - by Robert Love

  I have been writing a Delphi library for StackApps API. I have run into a problem with Indy. I am using the version that ships with Delphi 2010. If you pass invalid parameters to one of the StackApps API it will return a HTTP Error Code 400 and then in the response it will contain a JSON object with more details. By visiting http://api.stackoverflow.com/0.8/stats/?Key=BadOnPurpose in Chrome Browser you can see an Example. I.E. and Firefox hide the JSON. Using WireShark I can see that the JSON object is returned using the code below, but I am unable to access it using Indy. For this test code I dropped a TIdHttp component on the form and placed the following code in a button click. procedure TForm10.Button2Click(Sender: TObject); var SS : TStringStream; begin SS := TStringStream.Create; IdHTTP1.Get('http://api.stackoverflow.com/0.8/stats/?Key=BadOnPurpose',SS,[400]); Memo1.Lines.Text := SS.DataString; SS.Free; end; I passed [400] so that it would not raise the 400 exception. It is as if Indy stopped reading the response. As the contents of Memo1 are empty. I am looking for a way to get the JSON Details.

  Read the article

• Sample uniformly at random from an n-dimensional unit simplex.

  - by dreeves

  Sampling uniformly at random from an n-dimensional unit simplex is the fancy way to say that you want n random numbers such that they are all non-negative, they sum to one, and every possible vector of n non-negative numbers that sum to one are equally likely. In the n=2 case you want to sample uniformly from the segment of the line x+y=1 (ie, y=1-x) that is in the positive quadrant. In the n=3 case you're sampling from the triangle-shaped part of the plane x+y+z=1 that is in the positive octant of R3: (Image from http://en.wikipedia.org/wiki/Simplex.) Note that picking n uniform random numbers and then normalizing them so they sum to one does not work. You end up with a bias towards less extreme numbers. Similarly, picking n-1 uniform random numbers and then taking the nth to be one minus the sum of them also introduces bias. Wikipedia gives two algorithms to do this correctly: http://en.wikipedia.org/wiki/Simplex#Random_sampling (Though the second one currently claims to only be correct in practice, not in theory. I'm hoping to clean that up or clarify it when I understand this better. I initially stuck in a "WARNING: such-and-such paper claims the following is wrong" on that Wikipedia page and someone else turned it into the "works only in practice" caveat.) Finally, the question: What do you consider the best implementation of simplex sampling in Mathematica (preferably with empirical confirmation that it's correct)? Related questions http://stackoverflow.com/questions/2171074/generating-a-probability-distribution http://stackoverflow.com/questions/3007975/java-random-percentages

  Read the article

• Why is this simple jQuery hover event misbehaving in Internet Explorer 8?

  - by Siracuse

  I asked for help earlier on Stackoverflow involving highlighting spans with the same Class when a mouse hovers over any Span with that same Class. It is working great: http://stackoverflow.com/questions/2709686/how-can-i-add-a-border-to-all-the-elements-that-share-a-class-when-the-mouse-has $('span[class]').hover( function() { $('.' + $(this).attr('class')).css('background-color','green'); }, function() { $('.' + $(this).attr('class')).css('background-color','yellow'); } ) Here is an example of it in usage: http://dl.dropbox.com/u/638285/0utput.html However, it doesn't appear to work properly in IE8, while it DOES work in Chrome/Firefox. Here is a screenshot of it in IE8, with my mouse hovered over the " min) { min" section in the middle. As you can see, it highlighted the span that the mouse is hovering over perfectly fine. However, it has also highlighted some random spans above and below it that don't have the same class! Only the span's with the same Class as the one where the mouse is over should be highlighted green. In this screenshot, only that middle green section should be green. Here is a screenshot of it working properly in Firefox/Chrome with my mouse in the exact same position: This screenshot is correct as the span that the mouse is over (the green section) is the only one in this section that shares that class. Why is IE8 randomly green-highlighting spans when it shouldn't be (they don't share the same class) using my little jQuery snippet? Again, if you want to see it live I have it here: http://dl.dropbox.com/u/638285/0utput.html

  Read the article

• Why is my jQuery jEditable, edit-in-place callback not working?

  - by unknowndomain

  I am using a jQuery jEditable edit-in-place field but when the JSON function returns and I try to return a value from my edit-in-place callback all I get is a flash of You can see this here... http://clareshilland.unknowndomain.co.uk/ Hit Ctrl+L to login... Username: stackoverflow Password: jquery Although you can see the script in /script.js here is the main code exerpt... $('#menu li a').editable(edit_menu_item, { cssclass: 'editable' }); Here is the callback: function edit_menu_item(value, settings) { $.ajax({ type : "POST", cache : false, url : 'ajax/menu/edit-category.php', dataType: 'json', data : { 'id': this.id, 'value': value }, success : function(data) { if (data.status == 'ok') { alert('ok'); return data.title; } else { alert('n/ok'); return this.revert; } }}); } The JSON code is here: ajax/menu.edit-category.php The edit-in-place is is on the menu which also has a jQuery sortable on it. Single click to edit. Enter to save, and it stores the data but does not update it on the edit-in-place field. Please help stackoverflow, I have been working on this for a mega age. Thanks in advance!

  Read the article

• model not showing up in django admin.

  - by Zayatzz

  Hi. I have ceated several django apps and stuffs for my own fund and so far everything has been working fine. Now i just created new project (django 1.2.1) and have run into trouble from 1st moments. I created new app - game and new model Game. i created admin.py and put related stuff into it. Ran syncdb and went to check into admin. Model did not show up there. I proceeded to check and doublecheck and read through previous similar threads: http://stackoverflow.com/questions/1839927/registered-models-do-not-show-up-in-admin http://stackoverflow.com/questions/1694259/django-app-not-showing-up-in-admin-interface But as far as i can tell, they dont help me either. Perhaps someone else can point this out for me. models.py in game app: # -*- coding: utf-8 -*- from django.db import models class Game(models.Model): type = models.IntegerField(blank=False, null=False, default=1) teamone = models.CharField(max_length=100, blank=False, null=False) teamtwo = models.CharField(max_length=100, blank=False, null=False) gametime = models.DateTimeField(blank=False, null=False) admin.py in game app: # -*- coding: utf-8 -*- from jalka.game.models import Game from django.contrib import admin class GameAdmin(admin.ModelAdmin): list_display = ['type', 'teamone', 'teamtwo', 'gametime'] admin.site.register(Game, GameAdmin) project settings.py: MIDDLEWARE_CLASSES = ( 'django.middleware.common.CommonMiddleware', 'django.contrib.sessions.middleware.SessionMiddleware', 'django.middleware.csrf.CsrfViewMiddleware', 'django.contrib.auth.middleware.AuthenticationMiddleware', 'django.contrib.messages.middleware.MessageMiddleware', ) ROOT_URLCONF = 'jalka.urls' TEMPLATE_DIRS = ( "/home/projects/jalka/templates/" ) INSTALLED_APPS = ( 'django.contrib.auth', 'django.contrib.contenttypes', 'django.contrib.sessions', 'django.contrib.sites', 'django.contrib.messages', 'django.contrib.admin', 'game', ) urls.py: from django.conf.urls.defaults import * # Uncomment the next two lines to enable the admin: from django.contrib import admin admin.autodiscover() urlpatterns = patterns('', # Example: # (r'^jalka/', include('jalka.foo.urls')), (r'^admin/', include(admin.site.urls)), ) Alan.

  Read the article

• Clear UIWebView content upon dismissal of modal view (iPhone OS 3.0)

  - by Ricky

  I currently have a UIWebView that is displayed within a modal view. It is basically a detail view that provides a view of a page when the user clicks a link. When the view is dismissed and then brought up again (when the user clicks another link), the previously-loaded content is still visible and the new content loads "on top" of the last content. This makes sense because the instance of the UIWebView persists between sessions and is only released when the memory is needed. However, I would like to completely clear the UIWebView when the modal view is dismissed so that 1) content is cleared and 2) memory is freed. Thus far my research and attempts have not found an answer. These links haven't worked for me: http://stackoverflow.com/questions/2184688/is-it-possible-to-free-memory-of-uiwebview http://stackoverflow.com/questions/2311564/reused-uiwebview-showing-previous-loaded-content-for-a-brief-second-on-iphone I've tried [[NSURLCache sharedURLCache] removeAllCachedResponses]; and setting the webView to nil and manually releasing the webView upon modal-view-dismiss to no avail. Any thoughts from the wizened masses?

  Read the article

• How to set binding in xaml to my own variable

  - by Victor

  Hello. I have an object in the code: public class UserLogin { bool _IsUserLogin = false; public bool IsUserLogin { get { return _IsUserLogin; } set { _IsUserLogin = value; } } public UserLogin() { _IsUserLogin = false; } } .... public static UserLogin LoginState; ..... LoginState = new UserLogin(); And I need to set bindings to Button.IsEnabled property. I.e. when user not login yet - some buttons are disabled. How can this been done? I have try in xaml: <Button DataContext="LoginState" IsEnabled="{Binding Path=IsUserLogin}"> but, this dos't work and OutputWindow says: System.Windows.Data Error: 39 : BindingExpression path error: 'IsUserLogin' property not found on 'object'. I also have try to set Button.DataContext property to LoginState in the code, but have XamlParseException. I also read this one [http://stackoverflow.com/questions/1829758/wpf-binding-in-xaml-to-an-object-created-in-the-code-behind][1] but still can't set bindings. [1]: http://stackoverflow.com/questions/1829758/wpf-binding-in-xaml-to-an-object-created-in-the-code-behind. Please help!

  Read the article

• SVM Classification - minimum number of input sets for each class

  - by Amol Joshi

  Im trying to build an app to detect images which are advertisements from the webpages. Once I detect those Ill not be allowing those to be displayed on the client side. From the help that I got here in stackoverflow, I thought SVM is the best approach to my aim. So, I have coded SVM and an SMO myself. The dataset which I have got from UCI data repository has 3280 instances ( Link to Dataset- http://archive.ics.uci.edu/ml/datasets/Internet+Advertisements )where around 400 of them are from class representing Advertisement images and rest of them representing non-advertisement images. Right now Im taking the first 2800 input sets and training the SVM. But after looking at the accuracy rate I realised that most of those 2800 input sets are from non-advertisement image class. So Im getting very good accuracy for that class. So what can I do here? About how many input set shall I give to SVM to train and how many of them for each class? Thanks. Cheers. ( Basically made a new question because the context was different from my previous question. http://stackoverflow.com/questions/1991113/optimization-of-neural-network-input-data )

  Read the article

• PartCover 2.5.3 win 7 x64

  - by user329814

  Could you tell me how you got PartCover running with VS2008 and win 7 x64? Based on this post http://stackoverflow.com/questions/256287/how-do-i-run-partcover-in-x64-windows, I ran c:\Program Files (x86)\Gubka Bob\PartCover .NET 2.3>CorFlags.exe PartCover.exe / 32BIT+ /Force with result Microsoft (R) .NET Framework CorFlags Conversion Tool. Version 3.5.21022.8 Copyright (c) Microsoft Corporation. All rights reserved. corflags : warning CF011 : The specified file is strong name signed. Using /Force will invalidate the signature of this image and will require the assembly to be resigned. and c:\Program Files (x86)\NUnit 2.5.2\bin\net-2.0>CorFlags.exe nunit.exe /32BIT+ /Force with result Microsoft (R) .NET Framework CorFlags Conversion Tool. Version 3.5.21022.8 Copyright (c) Microsoft Corporation. All rights reserved. Also, based on my discussion http://stackoverflow.com/questions/2546340/using-partcover-2-3-with-net-4-0-runtime/2964333#2964333, I also tried to use the x86 version of NUnit What I'm trying to run coverage for is the c# money sample for NUnit 2.5.2 I get the same System.Threading.ThreadInterruptedException --- System.Runtime.InteropServices.COMException (0x80040153): Retrieving the COM class factory for component with CLSID {FB20430E-CDC9-45D7-8453-272268002E08} failed due to the following error: 80040153 Thank you Edit: same thing with PartCover 2.2 My settings: exe file: C:\Program Files (x86)\NUnit 2.5.2\bin\net-2.0\nunit-console-x86.exe working dir: c:\Program Files (x86)\NUnit 2.5.2\samples\csharp\money\ work arg: /config=c:\Program Files (x86)\NUnit 2.5.2\samples\csharp\money\cs-money.csproj rules: +[]

  Read the article

• Lucene.net create+lock errors in ASP.NET

  - by acidzombie24

  I have an issue with Lucene.net. It throws a lock exception. After poking around i notice these things. My code below works in an app bit when calling in Application_Start i get a NoSuchDirectoryException. Not closing the writer (as my code doesnt do below) i WILL get a LockObtainFailedException with the message Lock obtain timed out: SimpleFSLock@<FULL_PATH> from either app or asp.net These thread hinted when spawning threads they get less permissions then i do (but! my main thread has problems as well...) and one solution is to impersonate IIS. I am using visual studios 2010. I am not sure how full blown it is but my attempt to impersonate it failed. So my question is how do i have lucene create the directory and not throw an exception if dont close the writer for some reason (such as power going out)? http://stackoverflow.com/questions/2341163/why-is-my-lucene-index-getting-locked/2499285#2499285 http://stackoverflow.com/questions/1123517/lucene-net-and-i-o-threading-issue/1123981#1123981 static IndexWriter writer = null; static void lucene_init() { bool create = false; //I now use a full path. I still get NoSuchDirectoryException //string dirname = "LuceneIndex_z"; if (System.IO.Directory.Exists(dirname) == false) create = true; var directory = FSDirectory.GetDirectory(dirname); var analyzer = new StandardAnalyzer(); writer = new IndexWriter(directory, analyzer, create); }

  Read the article

• Lucene.net create+lock errors in ASP.NET

  - by acidzombie24

  I have an issue with Lucene.net. It throws a lock exception. After poking around i notice these things. My code below works in an app bit when calling in Application_Start i get a NoSuchDirectoryException. Not closing the writer (as my code doesnt do below) i WILL get a LockObtainFailedException with the message Lock obtain timed out: SimpleFSLock@<FULL_PATH> from either app or asp.net These thread hinted when spawning threads they get less permissions then i do (but! my main thread has problems as well...) and one solution is to impersonate IIS. I am using visual studios 2010. I am not sure how full blown it is but my attempt to impersonate it failed. So my question is how do i have lucene create the directory and not throw an exception if dont close the writer for some reason (such as power going out)? http://stackoverflow.com/questions/2341163/why-is-my-lucene-index-getting-locked/2499285#2499285 http://stackoverflow.com/questions/1123517/lucene-net-and-i-o-threading-issue/1123981#1123981 static IndexWriter writer = null; static void lucene_init() { bool create = false; string dirname = "LuceneIndex_z"; if (System.IO.Directory.Exists(dirname) == false) create = true; var directory = FSDirectory.GetDirectory(dirname); var analyzer = new StandardAnalyzer(); writer = new IndexWriter(directory, analyzer, create); }

  Read the article

• Ruby Shoes packager including Shoes in the app

  - by user206481

  I can't seem to get the Ruby Shoes packager to correctly create an exe with Shoes included. I'm using the Raisins release (0.r1134), with the pack.rb replaced from github. The exe's the packager makes are all 70-80K files (they obviously don't include shoes or ruby). These exe's will run on my XP machine that already has Shoes on it. but when I copy them to another laptop they start a "Shoes is downloading" dialog that does nothing and then goes away. I need to make standalone Windows exe's, and my understanding was that the "Yes, I want Shoes included" option in the packager would do that. Did I misunderstand the intent? Is there a way to make this work? Hope so, because I love Shoes. As most women do. Hmm... maybe Shoes was _why's attempt at getting more women into programming as well as kids...but I digress. The other threads I've found here imply this will work: http://stackoverflow.com/questions/1390721/problem-in-ruby-shoes-packaging http://stackoverflow.com/questions/363218/shoes-packager-problem

  Read the article

• Web scraping etiquette

  - by Ash

  I'm considering writing a simple web scraping application to extract information from a website that does not seem to specifically prohibit this. I've checked for other alternatives (eg RSS, web service) to get this information, but there are none available at this stage. Despite this I've also developed/maintained a few websites myself and so I realize that if web scraping is done naively/greedily it can slow things down for other users and generally become a nuisance. So, what etiquette is involved in terms of: Number of requests per second/minute/hour. HTTP User Agent content. HTTP Referer content. HTTP Cache settings. Buffer size for larger files/resources. Legalities and licensing issues. Good tools or design approaches to use. Robots.txt, is this relevant for web scraping or just crawlers/spiders? Compression such as GZip in requests. Update Found this relevant question on Meta: Etiquette of Screen Scaping StackOverflow. Jeff Atwood's answer has some helpful recommendations. Other related StackOverflow questions: Options for html scraping Legalities of screen scraping

  Read the article

• help in the Donalds B. Johnson's algorithm, i cannot understand the pseudo code (PART II)

  - by Pitelk

  Hi all , i cannot understand a certain part of the paper published by Donald Johnson about finding cycles (Circuits) in a graph. More specific i cannot understand what is the matrix Ak which is mentioned in the following line of the pseudo code : Ak:=adjacency structure of strong component K with least vertex in subgraph of G induced by {s,s+1,....n}; to make things worse some lines after is mentins " for i in Vk do " without declaring what the Vk is... As far i have understand we have the following: 1) in general, a strong component is a sub-graph of a graph, in which for every node of this sub-graph there is a path to any node of the sub-graph (in other words you can access any node of the sub-graph from any other node of the sub-graph) 2) a sub-graph induced by a list of nodes is a graph containing all these nodes plus all the edges connecting these nodes. in paper the mathematical definition is " F is a subgraph of G induced by W if W is subset of V and F = (W,{u,y)|u,y in W and (u,y) in E)}) where u,y are edges , E is the set of all the edges in the graph, W is a set of nodes. 3)in the code implementation the nodes are named by integer numbers 1 ... n. 4) I suspect that the Vk is the set of nodes of the strong component K. now to the question. Lets say we have a graph G= (V,E) with V = {1,2,3,4,5,6,7,8,9} which it can be divided into 3 strong components the SC1 = {1,4,7,8} SC2= {2,3,9} SC3 = {5,6} (and their edges) Can anybody give me an example for s =1, s= 2, s= 5 what if going to be the Vk and Ak according to the code? The pseudo code is in my previous question in http://stackoverflow.com/questions/2908575/help-in-the-donalds-b-johnsons-algorithm-i-cannot-understand-the-pseudo-code and the paper can be found at http://stackoverflow.com/questions/2908575/help-in-the-donalds-b-johnsons-algorithm-i-cannot-understand-the-pseudo-code thank you in advance

  Read the article

< Previous Page | 272 273 274 275 276 277 278 279 280 281 282 283  | Next Page >