Search Results

Search found 9122 results on 365 pages for 'sound card'.

Page 277/365 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

• Ubuntu 12.04 dual monitor reset bug

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) Few minutes after I login to my dual monitor setup its get reset to mirror screens. If I restore the settings via displays application everything is fine. On each reset the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like it's interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• Less graphics power all the sudden (Intel HD 3000)

  - by queueoverflow

  I have a Intel Sandy Bridge i5 with the HD 3000 graphics card. I used to be able to play Urban Terror and Nexuiz comfortably with 85 and 60 frames per seconds until mid/end of October 2012, the former even on a full HD display with that many frames. Now I have around 30 to 45 on the smaller laptop screen and around 20 to 30 on the external monitor. Did something happen to Kubuntu 12.04 so that it has less graphics performance than previously? Update I looked into the system monitor and could not detect anything being at the maximum. The four CPU cores were pretty much bored, the 8 GB RAM were filled with maybe 2 GB. And I ran intel_cpu_top and did not notice anything at its limit. See the output. after Kernel bisecting I now did a kernel bisect and tried 3.2.0-23, 3.2.0-27, 3.2.0-29 and 3.2.0-30 and all had full graphics power. Interestingly, I then had full power when I just booted back into the regular 3.2.0-32 kernel. This does not make sense to me …

  Read the article

• Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

  - by Coen

  After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

  Read the article

• What to do about "system running in low-graphics mode"?

  - by ubuntubabe

  My Dell which was 5 years old suddenly karked it and I had the "low graphics" black screen and useless dialogue box. As I believed it was a dead graphics card I went out and bought a brand new machine. I put aside the new machine and tried again in vain to open the Dell. I eventually got to the command line via Ctrl+Alt+F1. I logged into my account from there, and simply started a series of sudo apt-get remove of various softwares that I knew were installed on my PC (software without any great consequence like Google earth, tweak, Skype etc). Lo and behold after a sudo reboot my computer was fine again! So now I have 2 computers. BUT one week after buying the other one and installing 12.04 because I love Ubuntu, the SAME PROBLEM arrived! I once again deleted Google earth, Skype, and did a sudo reboot and everything worked as before. I think there is a bug or something in 12.04 as this problem has never arisen with any other versions of Ubuntu.

  Read the article

• New Workstation &ndash; Lenovo W530 Core i7 32GB 256GB SSD Win8Pro

  - by Brian Lanham

  So I pretty-much have my new machine up and running full-time. I am still going to have to hit my old workstation for some things but am more-or-less working on my new machine.  It’s really fast. And Bret was right, I’m not so far using all the RAM. 16 would have been enough but as @CodeMonkeyJava “go big or go home”. Windows 8 is…interesting.  So far I still seem to do most of my work in the “Desktop”.  However, I like the Store concept and I like the Metro UX.  Live tiles are also nice.  I really like how I can switch between Desktop and Metro easily.  Overall I think Microsoft has done a great job of combining the needed experience for touch and mouse. My overall Windows 8 rating is 5.9 because of the video card. Otherwise I’m hitting 7.8.  The system boots from cold in about 11 seconds and performs complete shutdown in 4.7 seconds.  It wakes from sleep in less than 1 second. VS 2012 starts and restarts almost instantly.  In fact, I find myself staring at the start page without realizing it.  Build time doesn’t seem to be significantly increased but it is faster. I seem to already be reinvigorated for work with this new machine. I’m looking forward to the performance.

  Read the article

• How to fix Sketchup in Wine when tool starts, but displays empty workspace?

  - by Chaos_99

  I've installed wine 1.6 and winetricks in an Linux Mint 15 system, then downloaded the latest Sketchup2013 'Make' Windows-Installer and installed through wine. I've prepared the wine environment with starting as WINEARCH=win32, installed corefonts and ie8 and enabled the override for the 'riched20' libraries. (I've no idea what the last bit does, but it was advised in some guides.) I've also tried without these steps. Only the win32 seems to make a difference, as the installer will complain about not finding SP2 otherwise. Sketchup is installed successfully and starts, but displays an empty viewport. The program is responsive and everything works, it's just that you can't see anything. I don't get any OpenGL error and the registry entries seem fine, according to the OpenGL issue workarounds floating around the net. I still think it has something to do with OpenGL not working properly, maybe not in the wine environment, but in the linux system? I'm running on a Lenovo W520 with Nvida/Intel hybrid cards, but only the NVida card is active and the properitary nvidia (319) drivers are installed. GLXGears runs fine, but clamps at 2x the refresh rate. glxinfo outputs direct rendering: Yes server glx vendor string: NVIDIA Corporation server glx version string: 1.4 I'm willing to try any linux or wine OpenGL tests to narrow down the problem, if you can offer any advise on what to use.

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Where to find information about ubuntu compatible or certified hardware/PC models

  - by Halkinn

  I am buying a new desktop PC in early 2013, anyway this question should apply to someone intending to buy a new laptop/ultrabook as well. This machine is not meant for gaming, and if I ocasionally do it, I can survive with minimum graphics. However I may need some heavy multimedia edition or multitasking at times, so basically my greatest priority is a good processor, after that perhaps average graphic card (if onboards are not enough, I am still not informed enough about that), at least 4GB of RAM with possibility of expansion. I know there are some PC models specially designed to ship with Ubuntu, which is the OS I use the most these days. However, most people around me use Windows and some software with unsupported versions for Linux and not having a Windows license becomes a bit problematic. Given that, I would like to find information about which PC models or even manufacters currently on the market have the best compatibility with Ubuntu, I am still undecided between building my own desktop or buying a pre-made model, so I would like to find information both for certified models and certified hardware or even Ubuntu partners that may work closely with Canonical. Where to find this information in order to make sure that I will have a good experience with Ubuntu on my new PC in the years to come?

  Read the article

• Ubuntu 12.04 Full Screen without Unity Hub

  - by Xatolos

  I couldn't find an answer for this, so I thought I would try here. My problem is, I have some games on Wine that play in full screen mode but I can't really get them in full screen mode. When they start up, they end up with the GUI's "HUD" overlapping the game which is really annoying and well kills the option to play the game. This has also happened in a few of my Linux programs as well. While I wrote its a problem with Unity, it really isn't limited to this though. I've done full screen mode on Unity and had the Unity side bar and top menu overlap, I've used Gnome and had the same issue happen, Gnome menu is in the top, Cinnamon had the same issue. Sometimes if I Alt-Tab out of it and back into the program it MIGHT remove the HUD but that doesn't always work, and lets face it, full screen mode that is killed by the GUI just isn't something that can really be ignored. Any suggestions or help would be highly welcomed. My laptop http://www.cnet.com/laptops/asus-g53jw-a1-15/4507-3121_7-34210244.html edit Seems so far to be an issue with Unity and Gnome being in 3D mode, and possibly an issue with my NVidia card and XServe (I think that was it...). Going to Unity/Gnome 2d modes seem to help with this for the moment...

  Read the article

• What is the best way to manage large 3d worlds (i.e minecraft style)?

  - by SomeXnaChump

  After playing minecraft I was marvelling a bit at their large worlds but at the same time finding it extremely slow to navigate, even with a quad core and meaty graphics card. Now I assume its fairly slow because: A) Its written in Java, and as most of the actual spatial partitioning and other memory management activities happen in there it would be slower than a native C++ version. B) They are not partitioning their world very well I could be wrong on both assumptions, however it got me thinking about the best way to manage large worlds. As it is more of a true 3d world, where a block can exist in any part of the world, it is basically a big 3d array [x][y][z], where each block in the world has a type (i.e BlockType.Empty = 0, BlockType.Dirt = 1 etc). Now I am assuming to make this sort of world performant you would need to: a) Use a tree of some variety (oct/kd/bsp) to split all the cubes out, it seems like an oct/kd would be the better option as you can just partition on a per cube level not a per triangle level. b) Use some algorithm to work out if the blocks within the scene can currently be seen, as blocks closer to the user could obfuscate the blocks behind, making it pointless to render them. c) Keep the block object themselves lightweight, so it is quick to add and remove them from the trees I guess there is no right answer to this, but I would be interested to see peoples opinions on the subject.

  Read the article

• Ubuntu 13.04 can only work in recovery mode

  - by zhangyangyu

  I have just updated my 12.10 to 13.04. Everything is updated. But I can only boot to a black screen. I mean after the GRUB interface and purple screen. And I can hear the voice of the password interface. But it is only the black screen. It all works OK in 12.10. But it can work in the recovery mode. I mean go into the recovery mode and choose resume. And then everything is OK. But when loading kernel, the screen is dirty. I don't know why and I have Googled a lot. But no resolutions works. My graphics card is Intel GMA HD 4000, tested as VESA: Intel® Sandybridge/Ivybridge Graphics. I have been trapped in this for a whole day. I do need help. Hope someone can help me. By the way, the kernel is 3.8.0-19 if it helps.

  Read the article

• NetworkManager detects no networks with a RTL8188CE

  - by Cormac O'Brien

  I'm on a 2011 Lenovo Thinkpad T420i with a Realtek RTL8188CE WiFi adapter. Here's the scenario: I pop in the Ubuntu LiveCD to install. Laptop detects all networks in range, I connect to my home network, internet working great. Once Ubuntu finishes installing, the home network I am connected to is the only one which appears in the applet list. Upon restarting or waking from suspend, NetworkManager does not detect any networks – it simply displays "Disconnected" under the Wireless Network section of the menu. I am able to connect to my home network by using the "Connect to Hidden Wireless Network" option and it works immediately. I have yet to test if this works with other SSIDs. I have tried reinstalling the entire OS as well as NetworkManager and my wireless drivers. For hardware info, I ran: cormac@cormac-T420:~$ sudo lshw -c network Here is the output for my wireless card: *-network description: Wireless interface product: RTL8188CE 802.11b/g/n WiFi Adapter vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: d0:df:9a:08:73:50 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rtl8192ce driverversion=3.2.0-26-generic firmware=N/A ip=192.168.1.138 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 ioport:5000(size=256) memory:f2500000-f2503fff I can provide more information if required. This was not a problem in Natty or Oneiric. I hope this can be fixed, I don't want to have to ask for an SSID wherever I need to connect.

  Read the article

• Laser range finder, what language to use? Beginner advice

  - by DrOnline

  I hope this is the right place. I am a programming beginner, and I want to make a laser range finder, and I need advice about how to proceed etc. In a few weeks I will get a lot of dirt cheap 3-5V lasers and some cheap usb webcams. I will point the laser and webcam in parallel, and somehow use trigonometry and programming to determined distance. I have seen online that others made done it this way, I have purposefully not looked at the details too much because I want to develop it on my own, and learn, but I know the general outline. I have a general idea of how to proceed. The program loads in a picture from the webcam, and I dunno how images work really, but I imagine there is a format that is basically an array of RGB values.. is this right? I will load in the red values, and find the most red one. I know the height difference between the laser and the cam. I know the center dot in the image, I know the redmost dot. I'm sure there's some way to figure out some range there. TO THE POINT: 1) Is my reasoning sound thus far, especially in terms of image analysis? I don't need complete solutions, just general points 2) What I need to figure out, is what platform to use. I have an arduino... apparently, I've read it's too weak to process images. Read that online. I know some C I know some Python I have Matlab. Which is the best option? I do not need high sampling rates, I have not decided on whether it should be automated or whether I should make a GUI with a button to press for samples. I will keep it simple and expand I think. I also do not need it to be super accurate, I'm just having fun here. Advice!

  Read the article

• Slight stuttering when moving windows in fresh 12.04 install

  - by Konsolkongen

  Installed Ubuntu 12.04 today and my problem is that when I'm moving the windows around my screen it doesn't feel smooth at all. Usually I can fix this by changing the refresh rate to 60Hz, but this time it doesn't help. My graphics card is a Nvidia GTX 560Ti and I've tried both the 295.40, 295.45 and 304.43 (which I'm currently using) but neither has resolved my problem. I searched around a bit and tried changing the refresh-rate using compizconfig-settings-manager and xrandr. No change using CCSM, but when I tried xrandr I got this reply: konsolkongen@konsolkongen-desktop:~$ xrandr -r 60Rate 60.0 Hz not available for this size - which is nonsense of course. This is what my xorg.conf file looks like: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 560 Ti" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: 1680x1050_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Any help would be greatly appreciated, my obsession with video quality can't stand stuttering like this. For what it's worth though, I don't have any screen tearing, so at least V-sync is on. Thanks.

  Read the article

• Extremely slow desktop and laggy. Need help with graphics driver

  - by user171624

  I am a fresh newbie Ubuntu user and I just installed my first Ubuntu 13.04 onto my HP Slate 2. I did a liveCD on my USB drive and installed everything perfectly fine...nice and smooth, not a trace of lag. Then I rebooted using Ubuntu itself on the computer, it was extremely slow and laggy. Icons or any buttons doesn't trigger right away, the performance of the entire thing looks like either 0.25 fps to 1 fps. My HP Slate 2 information: Processor: Intel Atom Z670 1.5Ghz Memory Ram: 2.0 GB Videocard: Intel GMA 600 (PowerVr SGX535) SolidStateDrive(SSD): 32GB I tried installing the intel linux graphics driver and it failed to install because it said I don't have any intel based graphics card. Well...I do as you see above. What can I do? I can't get on the internet on it, I'm using my primary computer (Windows 7) to do all the searchings and put the files onto the USB to move it over to my tablet. Simply...I don't get it...using liveCD on USB, it was all nice and smooth...then after the installation...BOOM! Slow, laggy, and etc. Can anyone help me? Thanks!

  Read the article

• Problems with dual monitor & resolutions, only in 14.04

  - by theLadder

  I installed Ubuntu 14.04 but i am having weird problems with my dual monitors and the resolutions. I also tried Xubuntu 14.04 and was having the same problem. I have one 32 inch LG TV with 1920x1080 and one monitor with 1280x1024 resolution. When i first start my 32 inch gets 1360x768, if i then try to change to 1920x1080, everythings looks fine and the prompt asking me if i want to keep settings comes up and starts the countdown, but after 2 seconds my computer freezes, and after a few more seconds it reboots itself. However, if i disable my smaller monitor first, i can change to 1920x1080 on my 32 inch without problems, but if i then activate the second monitor the same problem happens again. in Xubuntu 14.04 i can change the refresh rate, if i run the 32 inch at 30hz or 50hz everytying works, but i would like to be able to run it at 60hz. I'm currently running Xubuntu 13.10 without this problem. My graphics card is a ATI Radeon HD 4850. What is causing this problem, grahpics drivers? Kernel? Xorg? And how do i solve it?

  Read the article

• What kind of projects are suited as a portfolio? [on hold]

  - by Asyx

  I was thinking about finishing up some hobby projects I used myself or am planing to use myself but I'm not sure if a future employer might be put off by them. For example, if I decided to create a custom website for an online (gaming, maybe) community instead of using an existing CMS, is it a good idea to provide a link to said community website or should I just put up the CMS and pretend like nobody actually uses it? Also, what about very specific things? I like linguistics and constructing languages. Obviously nobody wants to come up with 1000s of words so people usually use word generators or software to emulate sound shift or software to organise everything and produce dictionaries and such. Would such a project be too specific and too abstract for a portfolio or is the "he did programming work simply for enjoyment and his hobby and not just for money or grades" thing more important? It's quite an abstract hobby and most people don't even know that it's a thing and think the languages you hear in Game of Thrones, Avatar or Star Trek are just gibberish. Explaining such things to people is a pain to begin with especially if said people speak no other language. Would such things throw an employer off or is the content itself completely irrelevant? Thanks. Also, if this is not fitting for the programmers stackexchange, then please, don't close the thread right away but tell me where else to go because I got here though a closed question from stackoverflow. Thanks.

  Read the article

• Ubuntu 12.10 Quantal Quetzal and AMD 12.11 Beta Driver

  - by White

  I'm using a Quantal AMDx64 install and a XFX Radeon HD5850 video card. I first enabled restricted drivers through additional drivers, but it resulted in breaking Unity and Compiz (I can only see my wallpaper and shortcuts. But the terminal still works and Nautilus too, however, without Close/Maximize/Minimize and slower). Then I uninstalled it and everything went back to normal. Then I installed it via terminal (12.10 version), and the result was the same. Then I downloaded it via ATI's web site (12.11 beta) and installed the .run file using the terminal, but the result was yet again the same. Then I went to the terminal and entered these commands: sudo apt-get remove --purge fglrx fglrx_* fglrx-amdcccle* fglrx-dev* - It said it had nothing to uninstall sudo rm /ect/x11/xorg.conf - No such directory sudo dpkg-reconfigure xserver-xorg sudo startx sudo cp/ect/x11/xorg.conf.orig /ect/x11/xorg.conf - Also, no such directory sudo aticonfig --initial sudo reboot Then, I was presented with the log in screen, but when I tried to login (with my account), it flashed a black screen and then threw me back. Guest account still works (without unity and compiz, tough) and I can still use TTY. And I also got the "AMD Testing Only" watermark. Then I figured that I should stop messing with the terminal and get help before I unleashed Apocalypse XD. Side notes: My Ubuntu is installed on a ext4 partition with 60GB, and I dual boot with Windows 7 (at least for now). My internet is a 50kbps 3G-ish, so downloading even small files is a pain, let alone a video driver. I would rather not reinstall the O.S., it was a herculean task to download everything I had in there, and I have very little free disk space for backups. I'm still new to Ubuntu (I know some basic commands), and I don't know how to debug, so please, be patient XD And using Windows, my internet is even slower (is that possible?), so it kind of leaves a torture aftertaste xD. So, if you guys could answer quickly, it would be greatly appreciated. Thanks in advance. If you need any info, just ask (and explain how to get it XD).

  Read the article

• Cannot connect to Internet via Wifi

  - by lvogel

  I have a laptop that's currently configured as a dual-boot. The problem: I cannot connect to the Internet in the home wireless network through Ubuntu in the apartment where I currently live. The strange part: I can connect to it just fine through Windows (as right now), and I can use the Internet through Ubuntu on this computer with all the other wireless networks I have tried. The problem is only with this particular combination. The only possible explanations I can think of are either that this network is WPS, or that it's a driver problem--Vodafone router. The router 'sees' the computer--and it says it's connected; however, I keep getting prompted for a password, and I enter the key that works with Windows, but in Ubuntu it just keeps asking for it repeatedly, and I can't access the Internet. I don't have an ethernet cable at the moment, but if someone would be so kind as to ask me questions I will gladly answer, and if you have suggestions, I will do them--the only thing is, I am subletting this apartment from someone who is away on vacation, so I don't want to screw with the router settings unless I know what I'm doing! - I do not have Wicd - Yes, I have the router's information (key works in Windows) - Feedback of lshw says that the wireless card is Ultimate N Wifi Link 5300, vendor: Intel Corporation, physical id: 0 ,etc. The first two commands I was told to try work OK, but when I typed sudo ifconfig wlan0 essid ..... I got back 'essid: Unknown host' Would my question be better on the Ubuntu forums than here on AU?

  Read the article

• Ubuntu 13.10. After login, no desktop displayed. Two Nvidia Graphics Cards, Four Monitors

  - by jmerkow

  I am working on an issue with my Ubuntu 13.10 installation. I am attempting to get 4 monitors up and running but I am having some trouble. So far, I installed and updated to the latest NVIDIA drivers (331.20). Initially X would not start (after installation) so I replaced my xorg.conf with xorg.conf.failsafe. This fixed that problem, but then I tried to enable the other 2 monitors (other video card) and xorg fails to start once again (after I login there is no desktop). I am fairly new to linux but I am not a complete beginner, but I'm not comfortable poking around too much on my own to troubleshoot yet.... lspci -nn | grep VGA: 03:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 570 Rev. 2] [10de:1086] (rev a1) 05:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF110 [GeForce GTX 580] [10de:1080] (rev a1) It seems that the nvidia-settings tool does not result in a good xorg.conf file. Here it is: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildmeister@swio-display-x86-rhel47-05) Wed Oct 30 18:20:32 PDT 2013 Section "ServerLayout" Identifier "Default Layout" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection ... Section "Monitor" Identifier "Configured Monitor" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "SHARP HDMI" HorizSync 15.0 - 68.0 VertRefresh 55.0 - 76.0 EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SyncMaster" HorizSync 0.0 - 0.0 VertRefresh 0.0 EndSection Section "Device" Identifier "Configured Video Device" Driver "vesa" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 570" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:5:0:0" EndSection Section "Screen" Identifier "Default Screen" Device "Configured Video Device" Monitor "Configured Monitor" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-1" Option "metamodes" "HDMI-0: nvidia-auto-select +640+0, DVI-I-3: nvidia-auto-select +0+1080" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• Ubuntu (i386 - 32bit) 12.04 LTS [DESKTOP] - Freezes During Preparing to Install

  - by Michael Ecklund

  I know this is for the Desktop version of Ubuntu, but I definitely plan on installing the server as well. I just want a GUI to manage my server. Here is what I have done: Placed Ubuntu i386/32bit 12.04 LTS [DESKTOP] disc in the disc tray. The disc loads fine. Clicked install Ubuntu. Without checking the download updates while installing or install this third-party software. Clicked continue. Mouse cursor turns to spinning circle and remains a spinning circle while the screen freezes its place at "Preparing to install Ubuntu". I tried not checking any of the boxes and clicking continue. I tried checking Download updates while installing. I tried checking Install this third-party software. I tried checking BOTH Download updates while installing AND Install this third-party software. Does anyone else face this very same issue? Is there a workaround for this problem? Do I need to use a lower version of Ubuntu? If so, which version do you recommend for my system specifications? My system meets the system requirements. Here are my exact system specifications. (Custom modifications: 320GBx2 HDD && 256MB AGP GFX card && 1GBx2 RAM)

  Read the article

• What's the best way to handle numerous recurring log entries in game loop?

  - by Kaa

  I have a custom logging system, use of which is scattered all over the engine and game. The system is linked to a "LogStore" that has an std::vector<string> logs[NUM_LOG_TYPES] - each vector corresponds with it's log type (info, error, debug, etc.). There's one extra std::vector that has "coordinates" to all log entries in the order they were received. Now, all the logging output is also displayed inside my development console in the game. The game console is handled by HTML-type GUI and therefore requires a new <p> element being added for each log output. My problem is that the log entries that are generated in the main loop each frame freeze the engine, because they continue to add elements to the in-game console, and if the console or guy generates a warning - that creates an infinite logging loop. I want to solve it by handling the recurring log entries in an elegant way that lets you know that something is critically wrong, but won't freeze the engine - like displaying the count of errors in the last 60 frames instead of displaying errors themselves. But how do you guys handle this? Does anyone know any nifty tricks to do this? I understand the question may sound vague, but if someone came across this type of issue I'm sure they would know exactly what's happening. Example problematic log entries: OpenGL warnings (I actually do check for errors every frame in many places) Really any prints anywhere in the main loop (may be debugging, may be warnings)

  Read the article

• Salary Negotiation; How Best to Broach the Subject? [closed]

  - by Ed S.

  So I have an upcoming performance review / salary increase and I am at a point in which I believe I will need to negotiate a larger raise than what is to be proposed. As I suspect this may be the case I have been reading as much information on the subject (negotiation) as possible. I work for a great company and fortunately I work under some really talented and reasonable managers. Unfortunately, I am not sure how best to bring up the subject. I don't want to sound greedy and I don't want to start off on the wrong foot. For the sake of argument, assume that I am actually worth more than I am being paid at the moment and I would like to make a counter offer for a relatively large increase (say, boss says 4%, I would like to counter with 15%. I know that seems very large, but I believe I have a case for it.) My question to you, those who are/have been on the other side of this scenario, is how should I start the conversation? What approach would make you most receptive to my plea? I've never negotiated before and I just don't want to start off on the wrong foot. My direct manager is a very straightforward individual, so sugarcoating is not necessary here, but at the same time, I don't want to seem overly aggressive or demanding. Thanks in advance for any advice you can offer.

  Read the article

• Help trying/downloading ubuntu

  - by koolomwee

  I can't try ubuntu. Every time i put in my disk and press try, it shows the ubuntu sign with the dots under it than it shows a command screen basically blinking saying that it closed and canceled applications belonging to ubuntu... Than I tried to download it from the disk... same thing. Than, because I have windows, I tried to download it from the website and it worked. I rebooted my computer and went into the Ubuntu option just to find a blinking command screen again... How do I get ubuntu to work? What does happen (with the command screen) is that it shows commands that are blinking to fast for me to read the whole thing, and then it stops after like a minute or two of blinking. The only thing I do get to read is that Ubuntu commanded some applications to shut down. In the CD one it only has like 5 error messages, and when I reboot and select Ubuntu, there are over a hundred error messages. With the live-cd I have to shut down my computer to use it again. With the reboot and clicking ubuntu option it reboots by itself. I expect it to actually start up with no error messages. UPDATE I've been trying to start Ubuntu for the last couple of days, and I noticed on my last try that it said "SIGNAL 15 RECEIVED"... It also said that it's stopping Bluetooth and all other programs, and that its rebooting Maybe that'll help a little with answering my question... thanks :) this also might help: computer brand/model: HP Windows 7 Home Premium Service Pack 1, HPE240f graphics card: ATI Radeon HD 5570 I also wrote the same question here: https://answers.launchpad.net/wubi/+question/194537 might help a little more with information

  Read the article

• Ubuntu 12.10 and nVidia drivers don't like each other?

  - by mingos

  I decided to upgrade both my computers from Precise to Quantal. What a mistake that was. My laptop has a nVidia GT 330M card, while the desktop has an nVidia 9600 GT. In both cases everything goes great as long as I use the Nouveau driver (ugh!). Can't really play games (Amnesia... and hoping for Steam Beta participation...), even though it's OK for work. Now, ever since 9.04 or so, I just installed nvidia-current and all just worked. Since 12.10, after installing nVidia drivers, Unity won't start at all (hangs with only the wallpaper displayed, no cursor or widgets), Gnome Shell is permanently in fallback mode. Now, I have tried on both computers, with multiple clean installs on Ubuntu (two separate downloads, just in case), one from Ubuntu Gnome Remix. And additionally, Fedora 17, which seems to suffer from the same issue. Tried all nVidia driver suggestions available in Software Sources, and even compiled the drivers myself. I tried several versions of the driver to exclude an issue with the newest one. In my frustration, I have switched to Windows (which, ironically, "just works" with my hardware), but still hold a twin OS configuration on the desktop and would like to use Ubuntu again. So, can anyone point me to where the issue might lie?

  Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >