Search Results

Search found 11380 results on 456 pages for 'cpu speed'.

Page 277/456 | < Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >

  • Why does Resource Monitor in windows 7 show half my memory as "Hardware Reserved"?

    - by Brandon
    Does anyone know why in Windows 7 Resource Monitor shows that I have 8 GB of RAM installed on my computer, but I only have 3.2 GB available as 4.8 GB are in "Hardware Reserve". I researched this issue and tried going into msconfig and making sure that in the boot options the number of processors and max memory options were turned off. I also opened the computer up and reseated each of the memory sticks while clearing out any dust that was in there. Some info on the system I am using: OS: Windows 7 Enterprise 64-bit Edition CPU: AMD Phenom X4 9750 Memory: 4 X 2GB DDR2 memory Motherboard: MS-7548 (Aspen) Any help would be much appreciated.

    Read the article

  • How to send a direccion to the void using the Hosts file and without using 127.0.0.1?

    - by magallanes
    I have some name address that i want to send straight to the void using the HOSTS file but i don't want to use the 127.0.0.1. How can i do that?. Why?, I want to speed up some proccess but 127.0.0.1 is serving a webserver, so if i use 127.0.0.1 then this process will call my webserver, consuming resources and may be delaying the process. Right now, i am using 0.0.0.0 instead of 127.0.0.1 but i am not sure if it is correct. 0.0.0.0 crl.microsoft.com

    Read the article

  • Full computer freeze with audio stuttering after playing games for a period of time

    - by Wes
    I've been having a problem with my computer freezing completely when playing games like LA Noire or SW:TOR (yay early access!). Basically, what happens is I will play for around an hour or so (depending on the game) and when the freeze happens, the entire computer locks up and any audio that was being played glitches out and stutters broken-record style (only much shorter. Very techno). I think it might be heat related and thought it might be my video card overheating, so I have been setting my video card (Nvidia Geforce 260GTX 216-core) fan to highest setting, but that has little to no effect. Now I'm beginning to think it's either my FSB or CPU overheating. Can anyone provide some insight or similar experiences? I'm really at a loss and don't wanna damage my rig beyond repair.

    Read the article

  • large RAID 10 vs small RAID1

    - by user116399
    The machine will store and serve millions of small files (<15Kb each), and all those files require a total storage space of 400G Considering the exact same SATA hard drives maker and models, on the exact same environment (OS, cpu, ram, raid controller, etc...) which one of the setups bellow would be faster? A) RAID 1 with 2 drives of 2T each, making up total storage of 2T B) RAID 10 with 4 drives of 2T each, making up total storage of 4T [EDIT]: I'm aware RAID10 is faster than RAID1. The larger the disk, at least in theory, the longer will take to do seeks/writes. So, will the performance gain of RAID10 will be outweighed by the "drag" caused the larger disk area when seek/write operations happened?

    Read the article

  • What are the current options to encrypted a partition on mac os x ?

    - by symbion
    I recently got my laptop stolen with some sensitive informations on it (personal source code, bank details in a secure file, passwords, etc) and I learnt the lesson: encrypt your sensitive data. Now, I am wondering what are the options to encrypt a partition (not an encrypt disk image) ? Aim: The aim is to prevent anyone (except me) to access those data. Requirement 0: The software must be able to encrypt non system partition. Requirement 1: Plausible deniability is required but preventing cold boot attack is however not an absolute requirement (I am not famous enough or have sensitive enough info to have this kind of requirement). Requirement 2 : Software taking advantage of AES hardware encryption are very welcome as I intent to get a Macbook Pro with i7 CPU (with AES-NI enabled instructions). I will have avirtual machine running in the encrypted partition. Requirement 3 : Free or reasonably cheap. Requirement 4 : Software must run on Mac OS X Snow Leopard or Lion. So far, TrueCrypt is the only option I have found. Regards,

    Read the article

  • aptana/eclipse blocks other apps

    - by waquner
    Hi, I've got a fresh win7 installation, the only apps installed so far are aptana (beta 3)/eclipse and firefox + chrome (except antivirus and drivers) Every time I start aptana, chrome and firefox are blocked, so firefox can't load a webpage (or sometimes takes veeeery long) and chrome doesn't even take care of events (so for example hovering over a link doesn't change the cursor and a click does...nothing or typing in an url, press enter - nothing happens) First I thought, aptana downloads something and blocks my internet connection... but IE works well and also there are no signs in the taskmanager (cpu%, network or memory) When I close Aptana, all works as before. I tried updating Java, which didn't help... On my office-computer I use the same apps and it works perfect. Got any ideas? TIA, waquner

    Read the article

  • How can I deactivate the gnome desktop of my ubuntu server?

    - by 19 Lee
    I'm running a home server on my old laptop (atom cpu). I installed ubuntu 12.04 server edition, but I also installed ubuntu-desktop. So, when I turn it on, ubuntu desktop is shown. I sometimes use GUI, but I want to turn the ubuntu-desktop (gnome-desktop) off when I don't use it. I think I can save resources by turning off the GUI. It's necessary since my laptop's performance is not very good and it often becomes very hot. I guess I can run ubuntu-desktop on my terminal with "startx" command. But, I don't know how to turn the X window off for a moment. Anybody have an idea? Thanks in advance.

    Read the article

  • How do I log file system read/writes by filename in Linux?

    - by Casey
    I'm looking for a simple method that will log file system operations. It should display the name of the file being accessed or modified. I'm familiar with powertop, and it appears this works to an extent, in so much that it show the user files that were written to. Is there any other utilities that support this feature. Some of my findings: powertop: best for write access logging, but more focused on CPU activity iotop: shows real time disk access by process, but not file name lsof: shows the open files per process, but not real time file access iostat: shows the real time I/O performance of disk/arrays but does not indicate file or process

    Read the article

  • Passenger/Rails not releasing memory

    - by michaeldelorenzo
    I have an Ubuntu server running three separate Rails (2.3.8) applications with Passenger, REE and Apache. Recently we started experiencing problems with ruby processes eating up memory and consuming entire cores on our server. Here's what we're getting... %CPU PID USER COMMAND 99.9 1717 nobody Rails: /var/www/api 99.6 5542 nobody Rails: /var/www/api 97.3 1223 nobody Rails: /var/www/api 4.7 5537 nobody Passenger ApplicationSpawner: /var/www/api 10.5 1801 nobody Rails: /var/www/api We've also seen instances where there have been over 100 instances of Apache running. These applications have been running for a few months without an of these issues, but in the last day or so we've been noticing this. The site referenced here is a Rails application that is a RESTful API so it serves many requests every minute. Any guidance on what we should be checking or looking out for would be appreciated.

    Read the article

  • Uncorrectable machine check

    - by GregC
    I am experiencing rare but real unrecoverable machine checks on HP DL370 G6 dual-core Xeon server. I ran memtest86+ before, and ran CPU-intensive operations without any problems. In your opinion, does this indicate a real problem, or is it normal and expected behavior? How would you approach this problem? EDIT after some troubleshooting, it seems that these machine checks, as well as problems when showing device manager can be traced back to NC375i NICs. All is well when the NICs are not in the server. Further improvements to stability of HP Gen6 with Intel Xeon have been brought in with BIOS update in September 2013 HP Update DVD. Intel's newer microcode makes these CPUs much more stable. We haven't seen hardware-related BSODs since the update in September.

    Read the article

  • Uploading to YouTube makes all browser tabs and devices disconnect

    - by fabsenet
    Whenever I upload a video to YouTube all other browser tabs behave like there is no connection at all. It even affects my phone and other computers on the network therefor I think it has to do with my router. When the upload is done everything works normally again. I never observed this behavior with any other upload. My router is a Fritz!Box 7390 and my uploading PC is connected through a 1000mb/s switch (wired) to the router. Uploading through another browser does not change anything. I understand that other sites become slow as the network resources are limited, but stopping altogether feels wrong. speed.io measures for my internet connection: 40.894 Kbit/s down, 2.685 Kbit/s up, 29 ms ping, 2.048 con/m connects

    Read the article

  • PSU aka Power Supply won't turn off and No Power_Good - Safe to keep using?

    - by Tek
    The title is the symptoms of my problem. I mainly chose this title for search engines so people can know why this is happening since I see a lot of uncertainty when it comes to this problem. I do have a question related to the source of the problem though. First of all, Inserting the power to the power supply automatically turns on my computer. Using a power supply tester, the tester automatically turns on without me having to push the button to test the PSU. lol. The PG (Power Good) signal is missing. The strange thing is my computer still turns on (OS boots, etc) considering a missing power good signal. Is it really that unsafe to use the power supply when it's missing the power good signal? All the voltages seem to be in check. Here's a picture: Power Supply Tester Readout And by safe (considering the readout) in the sense that is it likely my components (cpu, mobo, etc) could be damaged?

    Read the article

  • Kill program after it outputs a given line, from a shell script

    - by Paul
    Background: I am writing a test script for a piece of computational biology software. The software I am testing can take days or even weeks to run, so it has a recover functionality built in, in the case of system crashes or power failures. I am trying to figure out how to test the recovery system. Specifically, I can't figure out a way to "crash" the program in a controlled manner. I was thinking of somehow timing a SIGKILL instruction to run after some amount of time. This is probably not ideal, as the test case isn't guaranteed to run the same speed every time (it runs in a shared environment), so comparing the logs to desired output would be difficult. This software DOES print a line for each section of analysis it completes. Question: I was wondering if there was a good/elegant way (in a shell script) to capture output from a program and then kill the program when a given line/# of lines is output by the program?

    Read the article

  • VM: Windows 7 host, Linux guest, VT-d?

    - by chx
    I am sick of the driver issues of Linux. So I am planning to switch to Windows 7 as a host and virtualize my Linux into it. My laptop has integrated Intel graphics and supports VT-d. For speed reasons I would like to assign that card to Linux. Now, Parallels could do it but this page says Note: If you have only one PCIe video adapter, its name will be grayed out in the PCI Devices list and you will not be able to allocate it to your virtual machines. I would be perfectly fine with a headless Windows 7 (I can remotely admin from other computers or just the Linux guest) -- is there any VM software that doesn't have this restriction?

    Read the article

  • Offer me an ASP.NET & a SQL Server 2008 server specifications for about 2000 concurrent users, please.

    - by amkh
    We have a web application project wich will be created using ASP.NET 4.0, Entity Framework, and SQL Sever 2008 R2. To meet the needs, suppose a normal page of this application that has a query which it takes 10 miliseconds to response on a Core2 Quad @ 2.8GHz proccessor with 2x2GB of DDR3 Ram (EntityFramework overheads are considered). And we will have about 2000 concurrent user at peek times. So, what is the best recommended specifications (CPU/RAM/RAID/...) for the server which will be host this application? -- Or -- How can I calculate that?

    Read the article

  • Windows 7 extremely long startup

    - by Tyler
    Windows 7 before it even gets to login. On the "starting windows" splash screen takes no less than 15 minutes to finish more like 25 minutes most times. During this time the hard drive activity led indicator is blinking maybe once every 20 seconds. When I finally get to the desktop everything runs normally. I have unplugged all peripherals with same result. Ideas? It's 32bit. 4gig memory. Fast CPU which I can't recall off the top of my head.

    Read the article

  • Games + Closed Lid = Hibernation

    - by Isaac Rabinovitch
    I have an ASUS N53S that I mainly bought for its RAM capacity. (I run a lot of VMs.) But as a bonus, it came with a fancy ATI video card. So I decided to install GTA 4 and plug it into a big monitor and settle down for some casual mayhem. But after about 5 minutes, it goes into hibernation! What gives? Since I was using an external monitor and didn't need the keyboard (using an XBox controller) I closed the lid on the laptop. Gaming is compute-intensive, so my GPU and CPU were both working hard and generating heat. Closing the lid interfered with cooling. Since I have the laptop configured to hibernate when I press the power button, the heat-triggered shutdown caused hibernation.

    Read the article

  • Load on Ubuntu 8.04 LTS high

    - by Paddington
    My Ubuntu 8.04 LTS server periodically has a high load avg spike(once every 2 days) resulting in Apache timing out and virtualy everything even SSH to the server is not possible. When I am on the console and run TOP is see that The load avg increases from less than 1 to above 60 in 15 mins. How can I isolate the cause? top - 09:21:51 up 37 days, 20:18, 6 users, load average: 5.41, 5.53, 5.36 Tasks: 160 total, 2 running, 156 sleeping, 0 stopped, 2 zombie Cpu(s): 65.0%us, 8.8%sy, 0.0%ni, 1.0%id,24.6%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3989468k total, 3444984k used, 544484k free, 360460k buffers Swap: 11687248k total, 178168k used, 11509080k free, 881772k cached

    Read the article

  • Internet really slow or stops working on my computer but fine on my laptop and ipad

    - by Fr0zen1
    I know you are going to say that this has been answered already, but it hasnt. None of those solutions worked for me. So this is the problem, and it only occurs on my computer, my laptop,ipad and iphone are just fine. When I`m browsing the net, it laods webpages slow(my speed is 30mb down and 3mb up) and when I start downloading with a another application(steam, utorrent), my browser completely stops working, but the application thats downloading(steam, utorrent) continues to download with a fast spead(2-3mb/s) and I do not know why. I have this issue on all browsers. I have tried chrome, internet explorer and firefox. I have restored my windows but still the same issue and I also have kubuntu installed and it also has the same issue. I do not know why. Any help? Thank you

    Read the article

  • Improving sound quality with remote ESD server

    - by cuu508
    Hi, I'm investigating low-budget ways to get audio from my PC (Ubuntu) to HiFi without wires. I'm currently testing a setup where Asus WL-500gP wireless router runs ESD daemon and has attached USB soundcard which is then plugged into HiFi. I'm testing playback on PC with mpg123-esd and Spotify under Wine. The sound is there, latency is unexpectedly low, but I also hear occassional clicks and some distortion from time to time. I suppose that's because of the low latency and wireless streaming of uncompressed audio--any packet drops, CPU temporarily being busy etc. will cause clicks in sound output. Is there a way around this problem, increasing latency / buffer size somehow perhaps? Streaming using shoutcast protocol seems to be a way out but I have feeling that would be a complex and brittle setup.

    Read the article

  • (Windows 7) Dial Up Connection Locks up the Networking Service

    - by Nick
    I connect to the internet by using my cell phone as a dial up modem. (shh, don't tell my service provider) The connection is usually seamless and the speed is good (150kbps) but occasionally, the connection will get terminated by either the phone or the network, I'm not sure which and then Windows7 stubbornly doesn't acknowledge that the connection is dead so I can re-dial. I have tried to manually kill the connection, but then anything related to the network service refuses to open and the connection is still there. No "Network and Sharing Center", "Network Devices" and often the tray menu will refuse to pop open. The only way I have found to clear the problem is a full restart which. Logging off doesn't work and I haven't been able to find the service that is frozen. If anyone knows how to fix this or prevent this from happening or even how to go about troubleshooting I would be very grateful. ps. This problem is non-existant when tethering in linux on the same machine. (Ubunutu 9 and JoliOS)

    Read the article

  • Improve efficiency when using parallel to read from compressed stream

    - by Yoga
    Is another question extended from the previous one [1] I have a compressed file and stream them to feed into a python program, e.g. bzcat data.bz2 | parallel --no-notice -j16 --pipe python parse.py > result.txt The parse.py can read from stdin continusuoly and print to stdout My ec2 instance is 16 cores but from the top command it is showing 3 to 4 load average only. From the ps, I am seeing a lot of stuffs like.. sh -c 'dd bs=1 count=1 of=/tmp/7D_YxccfY7.chr 2>/dev/null'; I know I can improve using the -a in.txtto improve performance, but with my case I am streaming from bz2 (I cannot exact it since I don't have enought disk space) How to improve the efficiency for my case? [1] Gnu parallel not utilizing all the CPU

    Read the article

  • Install Windows with QEMU

    - by Radium
    I want to understand if it is possible to install Windows from Qemu to a physical HDD. I was trying to do that by doing something like this: qemu-system-x64 -m1024 -vnc :1 -hda /dev/sda -cdrom .../Windows.iso Installed successfully. But when i tried to boot normally got a blue screen telling me that a hardware change appeared so go away. I guess the problem is not because of QEMU-CPU emulation or smth, but because of HDD`s UID change which is used inside of Windows registry. Am i right? So if yes how to workaround this? Maybe i need to prepare Windows before the reboot? I have successfully installed FreeBSD via QEMU and thought with Windows it will go the same ...

    Read the article

  • Remote HTTP to FTP

    - by jamd12
    I am on a very slow download with the internet that I have and unfortunately I only have access to expensive and slow wireless or satelite. I have set up an FTP with a computer supplier locally who has a nice 2 Mbps speed and am trying to set up a way of adding links remotely (Hotfile, rapidshare, Fileserve, etc.) so that they can be downloaded onto the FTP and then transfered a few times a week manually onto a portable HDD. On my home PC I use Internet download manager for all my downloads. Is there a simple way that I can add links remotely to Internet Download Manager on the FTP or perhaps another solution? The OS on the FTP is Linux - I use Windows XP SP3 and Windows 7. I have not used FTP very much before so any suggestions on how best to do this would be much appreciated.

    Read the article

  • How does the performance of pure Nginx compare to cpNginx?

    - by jb510
    There is now a Cpanel plugin to fairly easily setup Nginx as a reverse proxy on a Cpanel/Apache server. I've been simultaneously interested in setting up my first unmanaged VPS and my first Nginx server and as a masochist figured why not combine the two. I'm wondering however if it's worth setting up a pure Nginx server vs trying out cpNginx on Apache? My goal is solely to host WordPress sites and while what I've read raves about Nginx's is exceptional ability serving static at least as a reverse proxy, I am unclear if there is substantial benefit to running a pure nginx with eAccelorator over cpNginx on Apache for dynamic sites? Regardless I'll be running W3TC on all sites to cache content, but am still interested if there are big CPU reductions running PHP scripts under pure Nginx over cpNginx?

    Read the article

< Previous Page | 273 274 275 276 277 278 279 280 281 282 283 284  | Next Page >