Search Results

Search found 7819 results on 313 pages for 'zend mail'.

Page 279/313 | < Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >

• Backup plan for linux webserver in small business?

  - by radman

  Hi, I am currently in the process of writing a backup plan for the webserver in use by my business. I am very new to this area and have a few ideas about how things should work but am unsure of what tools to use and what sort of restore process is appropriate. I'm looking for something relatively simplistic and it doesn't have to be 100% paranoid just enough to give me a reliable backup. Speed is not of the essence and there is not going to be a live fallback in place. The backup will be onto a single hdd that will be stored onsite (no option for offsite as yet). Backups will be taking place weekly. I am constrained by both time and money which is why I'm aiming for a good enough solution. Is taking an image of the webserver system drive periodically and using that as the backup appropriate? Should I be testing that the backups restore correctly every time that I perform one? This is a bit broad but what setup would you use if you were in my place, given the services I am running? Should I add additonal machines and split the services? Any advice is much appreciated! See below for server details Webserver Platform Linux Ubuntu server Running mail-server svn-server mediawiki wordpress apache-webserver Hardware single 500gb sata drive Architecture Single machine behind router (with firewall) accessible to the internet.

  Read the article

• Outlook won't re-connect to exchange after network is re-connected

  - by stan503

  I have a setup at my desk where I connect my computer to a an RJ45 switch that switches between two networks. One network is the corporate network, which is maintained by my company's IT, and the other is my own private network where I do testing (the two networks have to be separated). The corporate network hosts the exchange server where I get e-mail. When I switch from the private network to the corporate network, I expect Outlook to re-connect to the exchange server. However, I have found that sometimes when I come back, Outlook take an extremely long time to re-connect. Send/Receive will give me back the error 'The server is not available' (0x8004011D). It will sit there for 10 minutes to a few hours before it finally re-connects. The only other option is to reboot my computer, which is a huge pain for me since I run multiple VMs on it. This usually happens when I'm connected to the private network for a significant amount of time, so I'm thinking it's because Outlook has cached the network status. Is there a way to force Outlook to do a 'hard' re-connect to the exchange server? I'm using Windows XP SP 3 with Outlook 2007.

  Read the article

• Conditionally Rewrite Email Headers (From & Reply-To) Exchange 2010

  - by NorthVandea

  I have a client who maintains Company A (with email addresses %username%@companyA.com) and they own the domain companyB.com however there is no "infrastructure" (no Exchange server) set up specifically for companyB.com. My client needs to be able to have the end users within it's company (companyA.com) add a specific word or phrase to the Subject (or Body) line of the Outgoing email (they are only concerned with outgoing, incoming is a non-issue in this case) that triggers the Exchange 2010 servers to rewrite the header From and Reply-To [email protected] with [email protected] but this re-write should ONLY occur if the user places the key word/phrase in the Subject (or Body). I have attempted using Transport Rules and the New-AddressRewriteEntry cmdlet however each seems to have a limitation. From what I can tell Transport Rules cannot re-write the From/Reply-To fields and New-AddressRewriteEntry cannot be conditionally triggered based on message content. So to recap: User sends email outside the organization: From and Reply-To remain [email protected] User sends email outside the organization WITH "KeyWord" in the Subject or Body: From and Reply-To change to [email protected] automatically. Anyone know how this could be done WITHOUT coding a new Mail Agent? I don't have the programming knowledge to code a custom Agent... I can use any function of Exchange Management Shell or Console. Alternatively if anyone knows of a simple add-on program that could do this that would be good too. Any help would be greatly appreciated! Thank you!!!

  Read the article

• How can I disable DNSSC for Google Apps (GMail) MX records on my authoritative domains?

  - by meinemitternacht

  I'm running a BIND Master / Slave setup with DNSSEC, but some of my domains use Google Apps for e-mail services. Google doesn't support DNSSEC and BIND doesn't like it at all. Log output: Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM.dlv.isc.org/DLV/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/A/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/AAAA/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755cb83950: ALT2.ASPMX.L.GOOGLE.COM AAAA: bad cache hit (ALT2.ASPMX.L.GOOGLE.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/AAAA/IN': 69.147.224.178#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755ca52c30: ALT2.ASPMX.L.GOOGLE.COM A: bad cache hit (ALT2.ASPMX.L.GOOGLE.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ALT2.ASPMX.L.GOOGLE.COM/A/IN': 69.147.224.178#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755ca52c30: ASPMX2.GOOGLEMAIL.COM AAAA: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/AAAA/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755cb83950: ASPMX2.GOOGLEMAIL.COM A: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/A/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f754c1b0bd0: ASPMX2.GOOGLEMAIL.COM A: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/A/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f754c1a6a30: ASPMX2.GOOGLEMAIL.COM AAAA: bad cache hit (ASPMX2.GOOGLEMAIL.COM.dlv.isc.org/DLV) Sep 6 17:12:51 srv549 named[5376]: error (broken trust chain) resolving 'ASPMX2.GOOGLEMAIL.COM/AAAA/IN': 70.32.45.42#53 Sep 6 17:12:51 srv549 named[5376]: validating @0x7f755cb83950: ASPMX3.GOOGLEMAIL.COM AAAA: bad cache hit (ASPMX3.GOOGLEMAIL.COM.dlv.isc.org/DLV) I'm not absolutely sure this is stopping Google Apps from working, because I just enabled all of the DNSSEC features. Does anyone here have experience with this?

  Read the article

• Setting up WHM nameservers

  - by Miskone

  I am new to server administration and I've just got a dedicated root server from Hetzner. First I set up in Hetzner's robot DNS entries Registered nameservers: ns1.raybear.com 88.198.32.57 ns2.raybear.com 88.198.32.57 Under DNS entires I have buzz-buzz.me pointing to 88.198.32.57 // My server IP address and on my WHM I have DNS zone for buzz-buzz.me ; cPanel first:11.42.1.17 (update_time):1402062640 Cpanel::ZoneFile::VERSION:1.3 hostname:hosting.raybear.com latest:11.42.1.17 ; Zone file for buzz-buzz.me $TTL 14400 buzz-buzz.me. 86400 IN SOA ns1.raybear.com. miskone.gmail.com. ( 2014060605 ;Serial Number 86400 ;refresh 7200 ;retry 3600000 ;expire 86400 ) buzz-buzz.me. 86400 IN NS ns1.raybear.com. buzz-buzz.me. 86400 IN NS ns2.raybear.com. buzz-buzz.me. 14400 IN A 88.198.32.57 localhost 14400 IN A 127.0.0.1 buzz-buzz.me. 14400 IN MX 0 buzz-buzz.me. mail 14400 IN CNAME buzz-buzz.me. www 14400 IN CNAME buzz-buzz.me. ftp 14400 IN CNAME buzz-buzz.me. agent 14400 IN A 88.198.32.57 src 14400 IN A 88.198.32.57 platform 14400 IN A 88.198.32.57 But still I have some problems accesing buzz-buzz.me, agent.buzz-buzz.me and platform.buzz-buzz.me Also I have problem getting mails on Google account, I can send but not receive emails. How to solve this. As I said I am completly new here and I need urgent help.:(

  Read the article

• How can I configure Cyrus IMAP to submit a default realm to SASL?

  - by piwi

  I have configured Postfix to work with SASL using plain text, where the former automatically submits a default realm to the latter when requesting authentication. Assuming the domain name is example.com and the user is foo, here is how I configured it on my Debian system so far. In the postfix configuration file /etc/main.cf: smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $mydomain The SMTP configuration file /etc/postfix/smtpd.conf contains: pwcheck_method: saslauthd mech_list: PLAIN The SASL daemon is configured with the sasldb mechanism in /etc/default/saslauthd: MECHANIMS="sasldb" The SASL database file contains a single user, shown by sasldblistusers2: [email protected]: userPassword The authentication works well without having to provide a realm, as postifx does that for me. However, I cannot find out how to tell the Cyrus IMAP daemon to do the same. I created a user cyrus in my SASL database, which uses the realm of the host domain name, not example.com, for administrative purpose. I used this account to create a mailbox through cyradm for the user foo: cm user.foo IMAP is configured in /etc/imapd.conf this way: allowplaintext: yes sasl_minimum_layer: 0 sasl_pwcheck_method: saslauthd sasl_mech_list: PLAIN servername: mail.example.com If I enable cross-realm authentication (loginrealms: example.com), trying to authenticate using imtest works with these options: imtest -m login -a [email protected] localhost However, I would like to be able to authenticate without having to specify the realm, like this: imtest -m login -a foo localhost I thought that using virtdomains (setting it either to userid or on) and defaultdomain: example.com would do just that, but I cannot get to make it work. I always end up with this error: cyrus/imap[11012]: badlogin: localhost [127.0.0.1] plaintext foo SASL(-13): authentication failure: checkpass failed What I understand is that cyrus-imapd never tries to submit the realm when trying to authenticate the user foo. My question: how can I tell cyrus-imapd to send the domain name as the realm automatically? Thanks for your insights!

  Read the article

• Setup Exchange 2010 cannot verify Host (A) record warning

  - by Joost Verdaasdonk

  When I try to install Exchange 2010 on my server 2008 R2 server I get a warning during the prerequisites check: Warning: setup cannot verify that the 'Host' (A) record for this computer exists within the DNS database on server: 90.195.200.12. The goal of this Exchange setup is that I'm able to sent email in my local domain as well receive/sent email through the public domain name. Some information about my setup This Server is going to be a dedicated exchange host and has the following IP setup: (IP's are examples and not the real IP's ofc) Local VLAN NIC: IP: 10.10.50.22 Subnet: 255.255.255.0 No gateway DNS: 10.10.50.1 (is domain controler with authoritive DNS) public WAN NIC: IP: 90.195.200.148 Subnet: 255.255.255.235 Gateway: 90.195.200.145 DNS: 90.195.200.12 | 190.160.230.14 My public domain - exampledomain.com A record: mail - IP: 90.195.200.148 MX record IP: 90.195.200.148 As I'm seeing now the exchange setup is looking for the A record in one of the DNS servers in my Public WAN NIC. And ofc this is not where my A records are defined. I have those A records in 2 places: 1. In the domain controler DNS (the private nic) 2. In the online dns registration of my public domain (exampledomain.com) My question is... is this warning going to be a problem? Can I do something better in my setup so that this warning will go away? Please advice?

  Read the article

• 530 5.7.1 Client was not authenticated Exchange 2010 for some computers within mask

  - by user1636309

  We have a classic problem with Client not Authenticated but with a specific twist: We have an Exchange 2010 cluster, let's say EX01 and EX02, the connection is always to smtp.acme.com, then it is switched through load balancer. We have an application server, call it APP01 There are clients connected to the APP01. There is a need for anonymous mail relay from both clients and APP01. The Anonymous Users setting of the Exchange is DISABLED, but the specific computers - APP01 and clients by the mask, let's say, 192.168.2.* - are enabled. For internal relay, a "Send Connector" is created, and then the above IP addresses are added for the connector to allow computers, servers, or any other device such as a copy machine to use the exchange server to relay email to recipients. The problem is that the relay works for APP01 and some clients, but not others (we get "Client not Authenticated") - all inside the same network and the same mask. This is basically what we do to test it outside of our application: http://smtp25.blogspot.sk/2009/04/530-571-client-was-not-authenticated.html So, I am looking for ideas: What can be the reason for such a strange behaviour? Where I can see the trace of what's going on at the Exchange side?

  Read the article

• Outlook conversation view and categories

  - by Greg Jackson

  At work, I tend to receive a couple of hundred emails a day. To keep from being overwhelmed, I have been using categories to sort and prioritize my mail messages. I auto-assign categories, then group by them: Code Reviews, To, CC, Distribution List/BCC. This means that, for example, a message that's explicitly to me will always show up higher in my inbox than one I get because I'm on a Distribution List. It's a huge time saver and it brings important emails to my attention much more quickly. Recently, the email threads I'm involved in have started to get quite long, and I'd like to be able to use conversation view, or at least sort by subject. Outlook, however, doesn't seem to support any (useful) combination of conversation view and categories. I've tried the following things without success: Grouping by category, then conversation view -- Outlook gives me an error (the grouping/sort combination is too complex). Using a custom view to group by conversation -- category doesn't show up as an option to sort by Grouping by category, then subject -- Getting closer, but the top subject is the first alphabetically, not the most recent Grouping by conversation, then category -- This works, but it doesn't do me much good, because the top conversation is the latest, without regard to what category it belongs to Is there a way for me to retain my category system or something similar while taking advantage of grouping related emails together? I've written Outlook plugins in the past, so even that's not too out there to serve as a proper solution.

  Read the article

• Postfix qmgr process causes heavy overload on mailservers

  - by Mattias

  We are using Postfix as MTA for our e-mailmarketing software and once in a while we see that the load on one of the mailservers rises above 5. The load is caused by the qmgr-process which is the heart of Postfix and I see that it is consuming a lot of CPU resources. The process seems to be stuck because after 15 minutes it is still doing the samething and still increasing the load. Once I restart the postfix service the load rapidly decreases to below 1 and Postfix continues to send e-mails without any problems. I'm wondering if anyone else has encountered this problem and if people have suggestions on how to prevent it. The problem shows up on all our mailservers but almost never at more than 1 at the time. It seems to be triggered only when we are sending a mailing but the size (10 or 100.000 e-mails doesn't seem to make a difference). It maybe happens once a week or even less often and the time and day is also different every time. We tried to solve the problem by decreasing the amount of messages qmgr is allowed to process but this didn't solve it. We are using Postfix 2.5.5 on Debian Lenny 5.0.8 (postfix is installed through the default Debian repository). No special messages can be found in the logs (syslog, messages, mail.*). Thank you for your time

  Read the article

• Keyboard's media keys are blocked by a program

  - by Mike Hanson

  I've got a Microsoft Natural Ergonomic Keyboard 4000. In addition to the regular keys, it's also got keys for Web/Home, Search, Mail, Favorites (5), Calculator, and Media functions (Mute, Volume Up/Down, and Play/Pause). Everything works most of the time, and the exception is rather odd. I use a programming system called Clarion. When that has focus, the Media keys don't work. (All the others still do.) I've also discovered that programs that I create using Clarion also block the media keys (only when they have focus). This indicates that it's probably something in Clarion's Run-Time Library (RTL) that's causing the trouble. The keys will work if I click on a non-Clarion window before hitting the media key, but that's an undesirable hassle. The odd thing is that I have many colleagues with the same keyboard, and they have no problem. When I recently upgraded from Vista Professional to Win7 Ultimate, I noticed that various things "appear" differently. For example, with my old system, when I changed the volume or muted the volume bar visualization always appeared at the bottom right on the screen. Now it doesn't appear in certain programs, even when it works. This indicates an order of precedence for visual elements. I'm fairly certain a similar order of precedence exists for keyboard hooks. Depending on how the hooks are defined, and the order in which they're applied, it would seem that sometimes the IntelliType drivers don't see the media keystrokes. The Media keys probably behave differently than the rest of the "special" keys, because they are more of a standard across all keyboards, so perhaps are handled by a different driver hooking mechanism. Does anyone have any suggestions of how I might fix this problem? Is there some way to change the order of hooks? Delay the loading of the IntelliType driver? Thanks in advance!

  Read the article

• DAS vs SAN storage for serving 2 to 4 nodes

  - by Luke404

  We currently have 4 Linux nodes with local storage, arranged in two active/passive pairs with storage mirrored using DRBD, running virtual machines (actually using Xen Hypervisor) for typical hosting workloads (mail, web, a couple VPS, etc.). We're approaching the (presumed) maximum IOPS of those servers, and we're planning to migrate to an external storage solution with two active nodes, with capacity for up to four active nodes. Since we're an all-Dell shop I've done some research and found the MD3200 / MD3200i products should be the ones we're looking for. We are pretty sure we won't be attaching more than 4 hosts on a single storage and I'm wondering if there is any clear advantage for one or the other. In theory I should be able to attach 4 SAS hosts to a single MD3200 (single links on a single controller MD3200, or dual redundant SAS links from each host to a dual-controller MD3200), or 4 iSCSI hosts to a single MD3200i (directly on its 4 GigE ports without any switch, again with dual links for the dual controller option). Both setups should let us implement live VM migration since all hosts can access all the LUNs at the same time, and also some shared filesystem like GFS2 or OCFS2. Also, both setups should allow full redundancy of the whole system (assuming dual controllers in the storage). One difference I can see is that the DAS solution is actually limited to 4 hosts while the iSCSI one should be able to grow to more hosts (adding two GigE switches to the mix). One point for the iSCSI solution is that it would allow us to start out with our current nodes and upgrade them at a later time (we can't add other SAS controllers, but they already have 4 GigE ports each). With the right (iSCSI|SAS) controllers I should be able to connect diskless nodes and boot them off the external storage which I think is a good thing (get rid of any local storage). On the other hand, I would have thought the SAS one to be cheaper but it seems like an MD3200 actually costs a little less than an MD3200i (?) (please note: I've used Dell gear in my examples since that's what we're looking for but I assume the same goes with other vendors) I would like to know if my assumptions above are correct, and if I'm missing any important difference between the two setups.

  Read the article

• Autodiscover service seems to reply with User Principal Name instead of email address

  - by Jeff McJunkin

  After this latest round of Windows updates (on 1/11/11, in fact) my Exchange 2007 server of course rebooted. This may have had the side effect of making any changes I'd inadvertently made take effect. Since then, the Autodiscover service in Exchange 2007 from Outlook 2007 seems to reply with the User Principal Name ([email protected] instead of [email protected]). I'm specifically seeing this from within the "Test Email AutoConfiguration" tool in Outlook (the UPN appears in the first text box labeled "E-mail") and when creating a new profile in Outlook. If I disregard the UPN and instead fill in my email address, Autodiscover works as expected and I can connect without issue. I've confirmed using ADSI Edit that the SMTP email address is properly set for my users. I even went a bit crazy and set the UPN to the email address using ADSI Edit. I've re-installed the Client Access role on the server in question. Exchange server is Server 2008, 64-bit of course. Clients are mostly XP 32-bit, though the issue happens from a Windows 7 machine as well.

  Read the article

• Set postfix to send email but not to receive them

  - by CodeShining

  I'm using Google Apps to handle personal email addresses for my domain name, and I set up the DNS as Google suggests. All works fine. Now since I need a SMTP to send emails from my e-commerce I installed Postfix on the server. It works fine when I send emails to any email address but it doesn't send to the same domain name, so let's say my domain is example.com, I set postfix using example.com, if I try to reset a password using [email protected] postfix doesn't send and instead reports on the mail.log Sep 20 01:09:52 ip-10-54-26-162 postfix/pickup[6809]: B09A3415D8: uid=33 from=<www-data> Sep 20 01:09:52 ip-10-54-26-162 postfix/cleanup[6854]: B09A3415D8: message-id=<20120920010952.B09A3415D8@ip-10-54-26-162.eu-west-1.compute.internal> Sep 20 01:09:52 ip-10-54-26-162 postfix/qmgr[30978]: B09A3415D8: from=<[email protected]>, size=4234, nrcpt=1 (queue active) Sep 20 01:09:52 ip-10-54-26-162 postfix/local[6856]: B09A3415D8: to=<[email protected]>, relay=local, delay=0.01, delays=0.01/0/0/0, dsn=5.1.1, status=bounced (unknown user: "myaccount") Of course it cannot find a local user "myaccount" since that account is on Google Apps... How can I tell Postfix to send the email and do not search for a local user?

  Read the article

• Server unreachable without www

  - by deamon

  My server is unreachable without "www." prefix, even when trying it with ping. The DNS entry looks like this: $TTL 86400 @ IN SOA ns1.first-ns.de. postmaster.robot.first-ns.de. ( 2011010600 ; serial 14400 ; refresh 1800 ; retry 604800 ; expire 86400 ) ; minimum @ IN NS robotns3.second-ns.com. @ IN NS robotns2.second-ns.de. @ IN NS ns1.first-ns.de. @ IN A 1.2.3.4 localhost IN A 127.0.0.1 mail IN A 1.2.3.4 www IN A 1.2.3.4 ftp IN CNAME www imap IN CNAME www loopback IN CNAME localhost pop IN CNAME www relay IN CNAME www smtp IN CNAME www @ A DNS record of the same type for another domain on the same server is working with and without "www". And the VirualHost config looks like this: <VirtualHost *:80> ServerName somewhere.com ServerAlias www.somewhere.com ServerSignature Off ... </VirtualHost> Any idea what could be wrong?

  Read the article

• Exchange Connector Won't Send to External Domains

  - by sisdog

  I'm a developer trying to get my .Net application to send emails out through our Exchange server. I'm not an Exchange expert so I'll qualify that up front!! We've set up a receive Connector in Exchange that has the following properties: Network: allows all IP addresses via port 25. Authentication: Transport Layer Security and Externally Secured checkboxes are checked. Permission Groups: Anonymous Users and Exchange Servers checkboxes are checked. But, when I run this Powershell statement right on our Exchange server it works when I send to a local domain address but when I try to send to a remote domain it fails. WORKS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER (BTW: my value for OURSERVER=boxname.domainname.local. This is the same fully-qualified name that shows up in our Exchange Management Shell when I launch it). FAILS: C:\Windows\system32Send-Mailmessage -To [email protected] -From [email protected] -Subject testing -Body testing -SmtpServer OURSERVER Send-MailMessage : Mailbox unavailable. The server response was: 5.7.1 Unable to relay At line:1 char:17 + Send-Mailmessage <<<< -To [email protected] -From [email protected] -Subject testing -Body himom -SmtpServer FTI-EX + CategoryInfo : InvalidOperation: (System.Net.Mail.SmtpClient:SmtpClient) [Send-MailMessage], SmtpFailed RecipientException + FullyQualifiedErrorId : SmtpException,Microsoft.PowerShell.Commands.SendMailMessage EDIT: From @TheCleaner 's advice, I ran the Add-ADPermission to the relay and it didn't help; [PS] C:\Windows\system32Get-ReceiveConnector "Allowed Relay" | Add-ADPermission -User "NT AUTHORITY\ANONYMOUS LOGON" -E xtendedRights "Ms-Exch-SMTP-Accept-Any-Recipient" Identity User Deny Inherited -------- ---- ---- --------- FTI-EX\Allowed Relay NT AUTHORITY\ANON... False False Thanks for the help. Mark

  Read the article

• Recommendations for handling Directory Harvesting spam on Exchange 2003

  - by Aaron Alton

  Our Exchange server is getting slammed with anywhere between 450,000 and 700,000 spam messages per day. We receive about 1700 legitimate messages in the same time frame. Roughly 75% of the spam is directory harvesting. We currently have GFI MailEssentials installed. To it's credit, it's doing a very good job, but the sheer volume of spam that we're receiving, and the number of connections that our exchange server is making is preventing legitimate email from being delivered in a timely manner. GFI is set up to check for directory harvesting at the SMTP level, which I presume intercepts the mail before it hits the Exchange services , or goes through SMSE. This "module" is ordered at the top of the list, so (hopefully) dealing with the harvesting is consuming a minimum amount of server resources and bandwidth. My question is, is there anything I can do to prevent our Exchange server's connection pool from being eaten up by these spam hosts? We had to limit the number of concurrent connections being made by Exchange, because it was consuming all of our bandwidth. Thanks, in advance.

  Read the article

• IP Blacklists and suspicious inbound and outbound traffic

  - by Pantelis Sopasakis

  I administer a web server and recently we had our IP banned (!) from our host after they received a notification e-mail for abuse. In particular our server is allegedly involved in spam attacks over HTTP. The content of the abuse report email we received was not much informative - for example the IP addresses our server is supposed to have attacked against are not included - so I started a wireshark session checking for suspicious traffic over TCP/HTTP while trying to locate possible security holes on the system. (Let me note that the machine runs a Debian OS). Here is an example of such a request... Source: 89.74.188.233 Destination: 12.34.56.78 // my ip Protocol: HTTP Info: GET 'http://www.media.apniworld.com/image.php?type=hv' HTTP/1.0 I manually blacklisted this host (as well as some other ones) blocking them with iptables, but I can't keep on doing manually all day long... I'm looking for an automated way to block such IPs based on: Statistical analysis, pattern recognition or other AI-based analysis (Though, I'm reluctant to trust such a solution, if exists) Public blacklists Using DNSBL I actually found out that 89.74.188.233 is blacklisted. However other IPs which are strongly suspicious like 93.199.112.126 (i.e. http://www.pornstarnetwork.com/account/signin), unfortunately were not blacklisted! What I would like to do is to automatically connect my firewall with DNSBL (or some other blacklist database) and block all traffic towards blacklisted IPs or somehow have my local blacklist automatically updated.

  Read the article

• Notebook Operating System with extreme support cycles/security updates

  - by leto

  Hello there, after reading the announcements about Mac OS X "Lion" and Apples political decision, I've had enough. I'm a longtime Apple User since 1992, have always felt at home there, but am trying to switch to alternative Operating System since a year. I've also been working with Unix machines since 2001, so I'm looking in one of the free Unices or a Linux. Since I last looked at the desktop in 2002 choke much has changed, it seems. So I'm lost once more in the war between desktop environments and software. To be honest: I don't care what it's name is, I want to get my job done. Here's what I set me as landmark for an operating system/software to be considered: Has to be atleast four years old Has to supply security updates for current release for atleast a year Production quality stability for the whole desktop environment (!) No f****g commercial stuff that tends to supply me with privacy invading App Store or Cloud space So far I'm running a MacBook from 2007, 4 Gig memory, 250 Gig disk and I need: IMAPs for Mail since 1995 Webbrowser sic Shell Keeping current with Updates/Upgrades with no more than 5 Minutes spent in entering commands (makes it hard for OpenBSD ;-) ) A desktop filemanger would be nice, but is a bonus. What can you suggest as operating system? The one with the longest support cycles and best chance to survive the next 10 years will win a new user, even sending patches when needed :-) Greets

  Read the article

• Why is my Drupal Registration email considered spam by gmail? (headers included)

  - by Jasper

  I just created a Drupal website on a uni.cc subdomain that is brand-new also (it has barely had the 24 hours to propagate). However, when signing up for a test account, the confirmation email was marked as spam by gmail. Below are the headers of the email, which may provide some clues. Delivered-To: *my_email*@gmail.com Received: by 10.213.20.84 with SMTP id e20cs81420ebb; Mon, 19 Apr 2010 08:07:33 -0700 (PDT) Received: by 10.115.65.19 with SMTP id s19mr3930949wak.203.1271689651710; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Return-Path: <[email protected]> Received: from bat.unixbsd.info (bat.unixbsd.info [208.87.242.79]) by mx.google.com with ESMTP id 12si14637941iwn.9.2010.04.19.08.07.31; Mon, 19 Apr 2010 08:07:31 -0700 (PDT) Received-SPF: pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) client-ip=208.87.242.79; Authentication-Results: mx.google.com; spf=pass (google.com: best guess record for domain of [email protected] designates 208.87.242.79 as permitted sender) [email protected] Received: from nobody by bat.unixbsd.info with local (Exim 4.69) (envelope-from <[email protected]>) id 1O3sZP-0004mH-Ra for *my_email*@gmail.com; Mon, 19 Apr 2010 08:07:32 -0700 To: *my_email*@gmail.com Subject: Account details for Test at YuGiOh Rebirth MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8; format=flowed; delsp=yes Content-Transfer-Encoding: 8Bit X-Mailer: Drupal Errors-To: info -A T- yugiohrebirth.uni.cc From: info -A T- yugiohrebirth.uni.cc Message-Id: <[email protected]> Date: Mon, 19 Apr 2010 08:07:31 -0700 X-AntiAbuse: This header was added to track abuse, please include it with any abuse report X-AntiAbuse: Primary Hostname - bat.unixbsd.info X-AntiAbuse: Original Domain - gmail.com X-AntiAbuse: Originator/Caller UID/GID - [99 500] / [47 12] X-AntiAbuse: Sender Address Domain - bat.unixbsd.info X-Source: X-Source-Args: /usr/local/apache/bin/httpd -DSSL X-Source-Dir: gmh.ugtech.net:/public_html/YuGiOhRebirth

  Read the article

• Motion - takes snapshot without motion detected

  - by Emmanuel Brunet

  I've been installed the standard motion 3.2.12 package on debian 7.5. I would like to get snapshot ONLY when motion is detected, but it still saves a picture every second without any activity in front of the camera. I'm using a TENVIS JPT3815W IP camera motion.conf here is my configuration file setup_mode off target_dir /media/videos/log/webcam netcam_url http://webcam/snapshot.cgi netcam_tolerant_check on netcam_userpass admin:alpha1237 # Output frames at 1 fps when no motion is detected and increase to the # rate given by webcam_maxrate when motion is detected (default: off) webcam_motion off output_all off # detection settings 1-255 default 32 noise_level 50 # Maximum framerate for webcam streams (default: 1) webcam_maxrate 25 pre_capture 0 framerate 25 gap 30 locate on mail [email protected] text_right "FRONT CAMERA %Y/%m/%d - %T" text_double on ffmpeg_cap_new on ffmpeg_cap_motion on ffmpeg_video_codec mpeg4 output_motion off snapshot_interval 0 # Quality of the jpeg (in percent) images produced (default: 50) quality 90 # Restrict webcam connections to localhost only (default: on) webcam_localhost off # Limits the number of images per connection (default: 0 = unlimited) # Number can be defined by multiplying actual webcam rate by desired number of seconds # Actual webcam rate is the smallest of the numbers framerate and webcam_maxrate webcam_limit 0 Issue when I start motion images are stored in /media/videos/log/webcam nearly every second. I hjust want to get images when a motion is detected and the according video clip Any idea where the configuration fails ?

  Read the article

• Understanding encryption Keys

  - by claws

  Hello, I'm really embarrassed to ask this question but its the fact that I don't know anything about encryption. I always avoided it. I don't understand the concept of encryption keys (public key, private key, RSA key, DSA key, PGP Key, SSH key & what not) . I did encounter these in regular basis but as I said I always avoided them. Here are few instances where I encountered: Creating Account: A public RSA or DSA key will be needed for an account. Send the key along with your desired account name to [email protected] I really don't know what are RSA/DSA or How to get their keys? Do I need to register some where for that? Mailing: I'm unable to recall exactly but I've seen some mails have some attachments like signature or the mail footer will have something called PGP signature etc.. I really don't get its concept. GIT Version control: I created account in assembla.com (for private GIT repo) and it asked me to enter "SSH keys" to my profile. Where am I gonna get these? Why do I need it? Isn't SSH related to remote login (like remote desktop or telnet)? How are these two SSHs related & differ? I don't know in how many more situations I'm going to encounter these things. I'm really confused and have no clue about where to start & how to proceed to learn these things. Kindly someone point me in correct direction. Note: I've absolutely zero interested in encryption related topics. So, there is no way I'm going to read a graduate level book on this subject. I just want to clear my concepts without going into much depth.

  Read the article

• Outlook VBA script - find and replace text with image

  - by user2530616

  I have a e-commerce store. When I get a sale, I receive an order confirmation email which contains the name of the product sold. When the email comes through, I would like to run a script that replaces the product name eg. "red widget", with a picture of that product. Is that possible? I have found a similar code to replace text (set of numbers in this case) with a link, but I need it to replace with a picture instead. Option Explicit Sub InsertHyperLink(MyMail As MailItem) Dim body As String, re As Object, match As Variant body = MyMail.body Set re = CreateObject("vbscript.regexp") re.Pattern = "#[0-9][0-9][0-9][0-9][0-9][0-9]" For Each match In re.Execute(body) body = Replace(body, match.Value, "http://example.com/bug.html?id=" & Right(match.Value, 6), 1, -1, vbTextCompare) Next MyMail.body = body MyMail.Save End Sub example mail Order Confirmation Thanks for shopping with us today! ------------------------------------------------------ Order Number: 2209 Date Ordered: Friday 28 June, 2013 Products ------------------------------------------------------ 1 x red widget = $5.00 ------------------------------------------------------ Total: $0.00 Delivery Address xxx search text: "red widget" replace picture: redwidget.jpg

  Read the article

• IIS SMTP server (Installed on local server) in parallel to Google Apps

  - by shaharru

  I am currently using free version of Google Apps for hosting my email.It works great for my official mails my email on Google is [email protected]. In addition I'm sending out high volume mails (registrations, forgotten passwords, newsletters etc) from the website (www.mydomain.com) using IIS SMTP installed on my windows machine. These emails are sent from [email protected] My problem is that when I send email from the website using IIS SMTP to a mail address [email protected] I don’t receive the email to Google apps. (I only receive these emails if I install a pop service on the server with the [email protected] email box). It seems that the IIS SMTP is ignoring the domain MX records and just delivers these emails to my local server. Here are my DNS records for domain.com: mydomain.com A 82.80.200.20 3600s mydomain.com TXT v=spf1 ip4: 82.80.200.20 a mx ptr include:aspmx.googlemail.com ~all mydomain.com MX preference: 10 exchange: aspmx2.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx3.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx4.googlemail.com 3600s mydomain.com MX preference: 10 exchange: aspmx5.googlemail.com 3600s mydomain.com MX preference: 1 exchange: aspmx.l.google.com 3600s mydomain.com MX preference: 5 exchange: alt1.aspmx.l.google.com 3600s mydomain.com MX preference: 5 exchange: alt2.aspmx.l.google.com 3600s Please help! Thanks.

  Read the article

• Share Firefox/Thnderbird data between W7 and Linux Mint 12 in dual boot computer

  - by Albert

  I've just set up my laptop (where I had running only W7) with a dual boot to run Linux Mint 12 as well. I have a "Data" partition (apart from the required partitions for W7 and Linux) where I store pretty much everything that isn't software installations (music, videos, project files, etc). I seem to be able to access that NTFS partition totally fine from Mint (like I've always done with W7), which is cool because I can access all that stuff regardless of which OS I'm using. I would like to know if it's possible (and how) to go one step further and share programs data between the two OS. One example would be my Firefox and Thunderbird data. For example, in Firefox share my bookmarks (and if I could share history, autocomplete and all that stuff, that would be awesome). In thunderbird, be able to share my mail and configuration, seeing the same inbox, folders, message rules, etc... So if I receive/send an email from W7 and later switch to Mint, I can see that email as it had been received/sent from Mint, and vice versa. Is this even possible? Or am I asking for too much convenience? If it's possible, any clues on how to set it all up?

  Read the article

< Previous Page | 275 276 277 278 279 280 281 282 283 284 285 286  | Next Page >