Search Results

Search found 1043 results on 42 pages for 'i forgot'.

Page 28/42 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Recovering a damaged microSDHC

  - by djechelon

  I just bought from eBay a Kingston 32GB microSDHC that was advertised as defective. The seller said that there could be formatting problems or with transfer of large files. Unfortunately, when I got it, it was a total mess. My Nikon camera doesn't read it at all (OK, maybe it doesn't support 32GB) My Linux laptop doesn't mount it: can't read superblock The same laptop refuses to mkfs.msdos because it failed whilst writing reserved sector The same laptop, under Windows, doesn't read nor format the card HTC HD2 mounts the MMC, allows me to write via USB, but is unable to open the just written files OK, folks, now you would say I would have to go through Paypal complaint... that's not that easy. I consciously bought a half-price card that was known to show some defects, and Paypal complaints take time. Obviously, I can't accept somebody sold me a completely use-less computer decoration. So I'll keep it as last option. My question is Do you know a way, under either Linux or Windows, to thoroughly scan, test and possibly repair memory cards, even if I have to lose some percentage of space because of bad sectors? If I can keep at least half of the card intact it would certainly be fine. I used to do broken sector marking with hard disks in the past. I almost forgot: MONSTR:/home/djechelon # fsck /dev/mmcblk0p1 fsck from util-linux-ng 2.17.2 dosfsck 3.0.9, 31 Jan 2010, FAT32, LFN Read 512 bytes at 0:Input/output error

  Read the article

• Linux: How do I remove bootchart from the boot process?

  - by java.is.for.desktop

  Hello, everyone! I have OpenSUSE 11.2. I removed bootchart and forgot to run mkinitrd. Now, right at the start of the boot process, I get boot/93-bootchart.sh: line 17: 462 Terminated stopinitrd 5 I Can't find any 93-bootchart.sh anywhere. Failsafe boot mode doesn't help. Earlier I got an error message about non existing /sbin/bootchartd, but I just copied /bin/cat to /sbin/bootchartd using a GParted boot disk. I tried to use chroot with an OpenSUSE boot disk, but mkinitrd can't find the root device, which is there actually (/dev/sda5). How can I make my system boot again? EDIT Ok, now I managed to re-install the bootchart rpm, using OpenSUSE boot disk and chmod. The system starts again. But that annoying bootchart is still there. I will not try again to remove it. First I will try to figure out, how to disable it during the boot process. Hopefully with your help ;)

  Read the article

• Dealing with AVCHD. Any free software to extract or edit AVCHD video?

  - by Kelsey

  I have a Panasonic HDC-SD5 video carmera which records in HD format to a memory card. It also came with a DVD burner which burns this format to DVD which I need a blu-ray player to view. I can get about 30 min worth of video on 1 DVD. My problem is the software that comes with the camera is not very good at all so I am constantly just using the 'backup' feature in the included burner (connect drive to camera, push backup, and it spits out up to 4 DVDs worth of HD video). Now that I have the video backed up on DVD in the HD format (blu-ray), is there any free software that I can use to edit this video and create other HD DVD's with my own menus, transitions, etc? I was considering buying Pinnacle Studio but I wanted to exaust any free options before biting the bullet. Any suggestions for software I could use or anything else I could do to make dealing with this AVCHD format any easier that I am unaware of? Edit: Sorry forgot to include that I am running Windows Vista 64-bit. Edit: Still haven't found anything that is truely free. Everything has limitations by either time, watermark the video or degrade the quality. Edit: So I still haven't found really anything, so is there some software I can use to convert the video to another format that I then could use to edit the video?

  Read the article

• Need advice on a monitoring, reminder and warning application.

  - by cbmeeks

  I am a developer that also has to monitor several things on different servers. Such as: 1) Did all of the MS SQL databases backup last night? 2) Did all of the MySQL databases backup last night? 3) Were the database dumps actually copied to the right folder? 4) How much free space is left on each server's hard drives? 5) How big are folders "abc", "def", "etc" getting? 6) Send emails/alerts when thresholds are reached Etc. Just basically something to help me NOT forget such important things. I thought about writing something myself but didn't want to waste the effort if something is already out there. I would also prefer one application instead of many if I could. Thanks. EDIT Forgot to mention the operating system. These run on Windows Server 2003 and/or 2008. In fact, what would be cool is a program that supports multiple servers from one machine. Something that can log into those servers.

  Read the article

• Is there a Windows 7 compatible IPSec VPN client that allows protocol and port specific rules?

  - by Sani Huttunen

  As the title says, I need to find a IPSec VPN client for Windows 7. On XP and Vista we've used SafeNet SoftRemote in which you can set up rules for specific protocols and ports. But SoftRemote isn't compatible with Windows 7. 172.xxx.xxx.1 TCP 1433 172.xxx.xxx.2 TCP 1433 172.xxx.xxx.10 ALL ... Since the VPN gateway is configured this way the client must mirror these settings. I've tried TheGreenBow, NCP Secure Entry, Cisco VPN Client and Shrew Soft VPN but none of these allows you to configure by protocol and port. Does anyone have any other suggestions? EDIT: Forgot to mention that agressive mode is also a requirement. --UPDATE-- I've got some news... I've managed to get SoftRemote to work on Windows 7 x64 through Windows XP Mode. After scouring all corners of the Internet for idéas I had enough information to construct a working solution. This solution will probably benefit other clients as well! You'll find a post here with detailed instructions of how I went about.

  Read the article

• DNS issue for internal website routing internet connection from remote location

  - by Michael Paul

  I have an issue that I could use some help with. Our company has a main location and a remote location. Previously, the remote location was connected to the main location through an internet connection VPN tunnel. The connection was pitifully slow at 1.5Mbps, so we upgraded it with a 75Mbps direct link. That meant the remote location lost it's internet access, so we routed their access through the main office internet connection. Everything works perfect except for one thing. The website we host is not accessible from the remote location unless the IP address is used. If I do NSLOOKUP on our website address from a machine connected to the main location network, it resolves correctly to the inside IP address. However, if I do the same from a remote location machine, it resolves to the website's outside IP address. Our internal DNS server(s) have a pointer and CNAME records set up, and everything was working perfectly before the connection was upgraded. In addition, the remote location has a domain controller, DNS server and DHCP server to service these requests at the remote location and prevent these requests from getting routed back and forth over the link. So I think was it happening is that for some reason the DNS server at the remote location is not resolving our website name correctly and passing the requests on to the routers, which then push the request out to the internet DNS system. That resolves the name to our external IP. This is purely a DNS issue, everything else works just fine. I am just stumped on this one. Any ideas on how to fix this? Edit: I forgot to mention that at the remote side of the link is a Cisco ASA-5505 and at the main office there is a Cisco ASA-5510. The link is connected between these 2 devices and the routing is handled in the 5510. Thanks, Michael

  Read the article

• Windows XP over two monitors, but one of them switches off at boot... how to fix? How to switch bac

  - by jae

  When booting into XP (x64, Athlon II X2 245, 4GB RAM), my main monitor (got two 19" TFTs hooked up, two gfx cards, a 4650 (1GB, the primary monitor's on this) and a 4350 (512MB)) switches off. Logging in blind (cursor down key, typing password) gets me one screen, the secondary. Booted correctly until about two days ago. No clue what's the cause, last change was (if I don't overlook something) installing the ATI 9-12 hotfix. And booting into Windows 7, after returning from 7, it was like this. For some weird reason, I cannot start Catalyst Control Center (I right-click desktop, choose the CCC entry, the pointer changes to hourglass for a half-second... and nothing. Likewise with "Properties"... I think, as all windows open on the primary (off) screen, and no entry appears in the task bar for Properties) Completely stumped. Windows 7, same setup, works w/o a hitch. The primary monitor appears to run in some unknown, but pretty low, resolution, as the mouse pointer only moves onto it at about half-height. But, w/o CCC or display properties, I cannot check. And, obviously, not change anything. Hope this was not too long-winded. And I'm sure I still forgot essential stuff. :P

  Read the article

• Minimum specs needed to run 1080p HD movies?

  - by Wesley

  Hi all, I was wondering how low you could go with hardware that would still be able to smoothly run HD movies. My current plan is around $215 CAD w/o a hard drive: Intel Pentium 4 @ 3.2 GHz - 1GB DDR/SDRAM - 512MB X1600 Pro AGP - 350W PSU - ECS P4VXASD2+ - Bluray/DVD-RW drive. As for the hard drive, could I just get a 7200RPM IDE HDD? Also, I'm planning on installing XP Pro SP3, unless Ubuntu somehow has an advantage. I'm not wanting this to be a media center only computer... just want it to be a normal computer with just enough oomph to play HD movies. Thanks in advance. EDIT1: Forgot to mention that the Bluray/DVD-RW drive is SATA, but I was planning on getting an SATA-IDE adapter or a PCI card with SATA. EDIT2: Oh yes... if I get a PCI card with SATA, would you then recommend I use an SATA hard drive as well? That would leave all the IDE ports on the motherboard unused... is that a good idea?

  Read the article

• APC uptime 0 because of Fast

  - by demlasjr

  I have a VPS using Parallels/Plesk (11.0.9 Update #22, last updated at Oct 31, 2012 03:33 AM CentOS 6.3 (Final) x86_64) I have apache (CGI/FastCGI) installed and nginx as reverse proxy. Everything is working just fine. I installed APC for caching, but the issue is that the uptime is 0 always. It's restarting each 15 seconds or so. I checked everywhere and can't find a solution to fix it. The server have the grace restart enabled, but every 6 hours, which shouldn't influence the APC uptime. Searching in Google I found that this could be related to Apache, running with FCGId instead of FastCGI. Plesk/Apache is using this config file: usr/local/psa/admin/conf/templates/default/service/php_over_fastcgi.php which content is: <IfModule mod_fcgid.c> <Files ~ (\.php)> SetHandler fcgid-script FCGIWrapper <?php echo $VAR->server->webserver->apache->phpCgiBin ?> .p$ Options +ExecCGI allow from all </Files> Is here the issue or elsewhere ? How can I fix this to work with FastCGI and make APC working properly. I forgot to specify that even if the uptime is below one minute, APC is doing pretty good job caching (92% are hits).

  Read the article

• How to replace the domain name in a Wordpress database?

  - by Cristian

  I have a Wordpress database which was installed in a development environment... thus, all references to the site itself have a fixed IP address (say 192.168.16.2). Now, I have to migrate that database to a new Wordpress installation on a hosting. The problem is that the SQL dump contains a lot of references to the IP address, and I have to replace it with: my_domain.com. I could use sed or some other command to change the that from the command line, the problem is that there are a lot of configuration data which uses JSON. So what? Well, as you know, JSON arrays uses things like: s:4: to know how many chars an element has, and thus, if I just replace the IP with the domain name, the configuration files will get corrupted. I used an app for Windows some years ago that allows to change values in a database and takes care of the JSON arrays. Unfortunately, I forgot the name of the app... so the question is: do you know any app that allows me to do what I want?

  Read the article

• Are These Parts compatible?

  - by ell

  I have never assembled a PC before, although I have taken an old one apart and replaced a few parts in others here and there so I have (very) limited experience. I have been looking to make a pc and here are the parts I might buy: Foxconn P45AL Intel P45 (Socket 775) DDR2 Motherboard (with onboard sound I believe) Gigabyte GeForce GTX 460 OC 768MB GDDR5 PCI-Express Graphics Card Already have 2 1gb sticks of dual channel DDR2 memory Intel Core 2 Quad Q8400 LGA775 'Yorkfield' 2.66GHz 4MB-cache Processor Samsung SpinPoint F3 1TB SATA-II 32MB Cache Hard Drive Antec Dark Fleet Series DF10 Gaming Enclosure – Black I already have monitor, mouse, keyboard and DVD/CD drive Akasa Freedom Power 1000W Modular Power Supply I have never done this before so feel free to laugh at me for getting something obvious wrong, forgetting a vital component etc. but is all of this compatible? And have I gone overkill on the PSU, if so, please recommend one. Thanks in advance, ell. EDIT: Added PSU which I forgot to mention EDIT: I would be using this to surf the internet, write e-mails, chat, word process, play games such as team fortress 2 & spring rts (at highest graphics hopefully), some 3d modelling in blender, some opengl programming, and image editing in GIMP.

  Read the article

• How can I display additional boot and shutdown information on the Windows 7 welcome screen?

  - by Daniel Saner

  There is a small tweak, I believe it is a registry key, that allows to display additional information on the Welcome and Shutting down screens of Windows 7 (and most likely Vista, too). I have activated this tweak on one of my systems; unfortunately I forgot how I did it, and I can't seem to find the website that originally gave me that information. Usually, the Windows 7 welcome screen will just display "Welcome" when logging in. With the tweak activated, my Welcome screen gives status information such as "Loading user settings" or "Preparing desktop". When shutting down, the default screen simply says "Shutting down". With the tweak activated, it gives additional status information such as "Stopping Windows services". This appears the same way that Windows gives information when updates are installed or configured during the startup or shutdown procedure, and I find them quite helpful in getting a feel for what task takes how long during that process. The only setting I was able to find is the Boot log checkbox on the Boot tab of the msconfig application. However, this results in Windows displaying console logs of drivers it is loading, etc., instead of the animated Windows title. This is NOT the setting I am looking for. The "additional boot information" setting that I have activated on this system still displays the regular animated Windows logo, and only replaces the strings displayed on the blue Welcome and Shutdown screens. Could someone direct me to the registry key (or whatever setting) that is used to get this behaviour? Edit: Here are a few pictures of the enhanced Welcome and Shutdown screens taken with my mobile phone—they're in German though. Login screens "Waiting for User Profile Service" and "Preparing desktop": Logout screen "Stopping Windows services":

  Read the article

• Nginx configuration question

  - by Pockata

  Hey guys, i'm trying to make the autoindex feature only run for my ip address with this code: server{ ... autoindex off; ... if ($remote_addr ~ ..*.*) { autoindex on; } ... } But it doesn't work. It gives my a 403 :/ Can someone help me :) Btw, i'm using Debian Lenny and Nginx 0.6 :) EDIT: Here's my full configuration: server { listen 80; server_name site.com; server_name_in_redirect off; client_max_body_size 4M; server_tokens off; # log_subrequest on; autoindex off; # expires max; error_page 500 502 503 504 /var/www/nginx-default/50x.html; # error_page 404 /404.html; set $myhome /bla/bla; set $myroot $myhome/public; set $mysubd $myhome/subdomains; log_format new_log '$remote_addr - $remote_user [$time_local] $request ' '"$status" "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; # Star nginx :@ access_log /bla/bla/logs/access.log new_log; error_log /bla/bla/logs/error.log; if ($remote_addr ~ 94.156.58.138) { autoindex on; } # Subdomains if ($host ~* (.*)\.site\.org$) { set $myroot $mysubd/$1; } # Static files # location ~* \.(jpg|jpeg|gif|css|png|js|ico)$ { # access_log off; # expires 30d; # } location / { root $myroot; index index.php index.html index.htm; } # PHP location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $myroot$fastcgi_script_name; include fastcgi_params; } # .Htaccess location ~ /\.ht { deny all; } } I forgot to mention that when i add the code to remove static files from my access log, the static files cannot be accessed. I don't know if it's relevant :)

  Read the article

• Add files/folders/Apps to a new User Account

  - by odeho19

  I have created a new user acct. for my roommate. I/we don't really care much for IE, and I'd like to add Google Chrome, and FF for her, to let her choose her own browser. Plus I'd like to add some other apps for her, and transfer some of her personal info that she's been storing on my administrative acct. (i.e. personal photos and such). So, like I said the account is set up. But when I go to use Chrome, it won't open. It, along with other apps are listed in the list of "approved" applications under the parental control list. (Application Restrictions List) But they either don't show up when searched for,( in her acct.) or won't open and operate. One other example is Faststone Capture. And then, I've got one application, Yahoo, "Unchecked", and yet there it is in her account, AND IT WORKS! I do not get it. The purpose to setting up an account for her was to only restrict that she couldn't delete, or uninstall anything on the computer. I don't care, (obviously within reason) what she installs, but NO TAKING AWAY! lol Here is a screen shot of the restrictions list: So, here I sit, wondering what I did wrong, or forgot to do in order for these to work. I don't care if Yahoo works or not. But her photos being transferred, Chrome/FF working, and Faststone Capture working, are a priority for me. If anyone has any ideas, I would appreciate any advice. Thanks! OH Edit: Also, my account is an Administrative one. The account I am creating for her is just a Standard User Acct.

  Read the article

• Exclude list of specific files in wget

  - by nanker

  I am trying to download a lot of pages from a website on dial-up and it can be brutally slow. I have almost got the perfect wget command, but because I'm downloading pages from the same site wget wastes times downloading the same standard images for each page. If I know the name of the default page images, is there any way to have wget ignore and thus avoid downloading those for each and every page? Here is an example of one of the wget commands that my shell script generates into another shell script to download all of the pages: mkdir candy-canes-on-the-flannel-board-in-preschool cd candy-canes-on-the-flannel-board-in-preschool wget -p -nd -A jpg,html -k http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ wget -c --random-wait --timeout=30 --user-agent="Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.9.0.3) Gecko/2008092416 Firefox/3.0.3" http://www.teachpreschool.org/2011/12/candy-canes-on-the-flannel-board-in-preschool/ -O "candy-canes-on-the-flannel-board-in-preschool" rm Baby-and-Toddler.jpg Childrens-Books.jpg Creative-Art.jpg Felt-Fun.jpg Happy_Rainbow-e1338766526528.jpg index.html Language-and-Literacy.jpg Light-table-Button.jpg Math.jpg Outdoor-Play.jpg outer-jacket1-300x153.jpg preschoolspot-button-small.jpg robots.txt Science-and-Nature.jpg Signature-2.jpg Story-Telling.jpg Tags-on-Preschool.jpg Teaching-Two-and-Three-Year-olds.jpg cd ../ Now I realize the script is not likely as savvy as it could be but it is doing what I need at the moment except that you can see from the rm command that I would just like to prevent wget from downloading the files in the first place if possible. I almost forgot to mention, there are two wget commands and that is because the first one downloads the page as index.html and for some reason it does not open in my browser, however, when I open it and look at it in vim all of the page's content is there, so I am not sure why it does not open. But if I just issue the second wget command as it is then that page, same file really with an alternate name, opens up fine. Something that if I could fix would also help to streamline the process.

  Read the article

• Is this processor burned?

  - by Jhonnytunes

  I've recently exchange the processors in two PCChips boards. Both boards are LGA775. Board A is P17G(Pentium 4 HyperThreading 3GHz) and board B is P49G(Pentium Dual Core 3GHz). I use board A to watch videos, and some of them are 3GB size and this is why I exchanged the CPU. I installed Dual Core in board A and it worked out of the box, now 3GB videos use 5% of CPU instead of 50%. When I installed the pentium in the board B, I forgot to connect the 4pin power and, when i powered on the PC, the CPU fan stay off. Then, I connected all right this time, and now the board doesnt show video. I think the CPU is not working but im not sure about that. The PC turns on and the HD spins, the CPU fan spins, network socket blinking, but not video and case power led is neither blinking. I tried with other PSU and everything was the same. I figure out that CPU have that paste above. IDK really what's happening, I hope I dont have to buy another CPU. Is it Burned?

  Read the article

• WebHost Manager - Apache's VHost isn't matching the DNS entry

  - by Trans

  I've used CPanel's WebHost Manager to create a new host on my VPS. I then used my HOSTS file to point fake.com to the relevant IP address. The problem I'm having now is, Apache isn't recognizing the VHost,or something, as it's just loading the default entry and 404'ing every document I try to GET. Here's the VHost entry NameVirtualHost 0.0.0.209:80 NameVirtualHost 0.0.0.211:80 <VirtualHost 0.0.0.209:80> ServerName fake.com ServerAlias www.fake.com DocumentRoot /home/fakecom/public_html ServerAdmin [email protected] ## User fakecom # Needed for Cpanel::ApacheConf <IfModule mod_suphp.c> suPHP_UserGroup fakecom fakecom </IfModule> <IfModule !mod_disable_suexec.c> SuexecUserGroup fakecom fakecom </IfModule> CustomLog /usr/local/apache/domlogs/fake.com-bytes_log "%{%s}t %I .\n%{%s}t %O ." CustomLog /usr/local/apache/domlogs/fake.com combined Options -ExecCGI -Includes RemoveHandler cgi-script .cgi .pl .plx .ppl .perl ScriptAlias /cgi-bin/ /home/fakecom/public_html/cgi-bin/ </VirtualHost> I've Google'd this profusely and all that's being returned is 'DNS errors. Wait for it to propagate'. That's obviously not my problem, since I'm using HOSTS. What else could be causing this? :/ EDIT: Forgot to mention. http://fake.com/~fakecom/test.html loads just fine. So the fake.com is pointing to the right IP.

  Read the article

• linux keeps disconnecting from wireless network

  - by Matteo Ceccarello

  I'm running Arch Linux on an Acer laptop and my wirless connection doesn't stay up. After a while it disconnects, and when I try to reconnect I get stuck with a "Waiting for authorization" message. I have to retry several times before getting the connection stay up for few minutes. This happens with both networkmanager and wicd. The strange thing is that the iMac that sits next to the laptop connects fine, and when I use my laptop within the university wireless network it works normally. How can I solve this problem? EDIT: I've tried to connect manually following the steps iwlist wlan0 scan wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf dhcpcd wlan0 and it works, I can ping google. However, looking to wpa supplicant output I see that it keeps connecting and disconnecting. I'm using WPA2, and this seems to be a problem in authentication. EDIT 2: as pointed out in the answers I forgot to mention my hardware/software specifications: kernel: Linux 3.0-ARCH wireless card: # lspci | grep -i net 07:00.0 Network controller: Intel Corporation WiFi Link 5100 module used # lsmod | grep -i 80211 mac80211 216021 1 iwlagn I use a Netgear DGN1000 modem/router My dmseg output is shown here http://pastebin.com/8Tf7iage

  Read the article

• Generating new SID for Windows 7 cloned partition in Linux?

  - by Jack

  So I've read that the proper way to clone a Windows 7 partition is to run a Sysprep after the clone is complete. For MANY reasons, this is not possible the way we are cloning these drives (long story short, the drive should be fully up and running after we clone it, with all the settings already there and requiring no user intervention; and no, not even an answer file would work because the way we customize all the Win7 settings is complex and we do not want the user touching the settings). I understand Microsoft will not support Windows 7 clones if it is not sysprepped and that is fine for us. Acronis recovery tools get around this by ticking an option called "Create new NT signature", which resets the SID and GUID on any restore. Symantec has a tool called Ghostwalker which does the same thing. However, we are looking for a way to do this in Linux because we want to use open source tools to do the imaging (fsarchiver, partclone, etc. basically the same tools Clonezilla uses internally to clone NTFS partitions). The question is, if we clone using these tools in Linux, how would we generate a new SID thereafter (without the use of sysprep)? Is there any way to do it within a Linux environment? The whole image process is automated so if it is a simple command that I can just throw in my shell script, that would be even better. Of course, it would be nice to know if this is even possible. Any ideas? EDIT: Forgot to mention that the target machines we are restoring the image on are EXACTLY the same.

  Read the article

• How to connect a Win XP PC and Win 7 PC with a Linksys WRT54G Router to a PPPOE connection ?

  - by ChristianM

  I have two PCs and a WRT56G Router. My provider is a PPPOE connection (username and password). I can connect my Windows 7 easily. Even if I choose Auto or PPPOE on the router's configuration. Maybe because this one had the connection in the first place with the username and password set up. But I can't connect the Windows XP PC. Actually it does connect in a way, but it receives and sents just a few packages. I can actually see in My Network Places how many packages does the Gateway make and it's a big difference. And it won't open any page. How should I set up the router so I can give enough bandwith to the Windows XP PC ? I've seen another problem that I forgot to mention. The router can't connect with the pppoe settings. I don't know why, but with Auto DHCP setting and my Windows 7 connected with pppoe settings works. EDIT2: I've installed Win 7 on the other PC so I won't have any problem of compatibility betwen them. But I still can't connect the router with PPPOE settings to the internet. It looks like this: http://img641.imageshack.us/img641/9780/capturefba.png If you need any other screens or info, please tell me.

  Read the article

• Looking for comprehensive computer monitoring software

  - by cornjuliox

  Summer in this country is insanely hot. So hot in fact, that I think we just lost a machine due to overheating (last recorded CPU/GPU temp was close to 100 C, now it wont start and lets out a long series of short beeps on power up), but that's not my concern here. Since heat is such a problem for me, I use several different pieces of software to monitor temperatures in my machine. I use MSI Afterburner to monitor GPU temp, control GPU fan speed and for some light overclocking, and then I use Speccy and SpeedFan to monitor the rest of the system, CPU temp and everything. The setup works fine for now, but I want to consolidate all this into one program so I'm not juggling several windows at once. Is there any program out there that will let me monitor the following from a single window: CPU Temp and Fan Speed CPU clock GPU Temp and Fan Speed GPU clock, both core and memory Additionally, mobo temp (Speccy lists both CPU and Motherboard temp, I assume that the latter is referring to North and Southbridge temperatures. I'm also looking for the ability to chart these data points on a graph over time, basically to see just how high the temperatures spike under load and for general analysis. It'd be nice if it could handle overclocking of both CPU and GPU in real time too. Any suggestions? Edit: I forgot to mention that I'm on Windows 7, 64-bit

  Read the article

• New Static Website with Hosted DNS alternating 502, 503 and Page Does Not Exist Errors

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Bouncing between a 502 and 503 error

  - by Dave

  This has become an increasingly frustrating ordeal. I'm mostly a web developer, so forgive me if I am using improper terminology here. I have a client that had purchased a domain at JustHost. We built him a website and have it on our own server space. Now, I'm mostly used to dealing with godaddy and it is simple enough to manage dns records and point the A record to our server IP, where Apache on our end deals with the domains via name-based virtual hosts. But for some reason, in setting this up with JustHost, when attempting to go to the domain name, I either get a 502 or 503 error or "webpage does not exist". Now, I know that the basic functionality of the webpage must be working because I can access the the index etc straight through my servers www data (IE [server-ip]/website_folder). I was on the phone with technical support for over three hours yesterday with justhost and the best I could get was "That's really weird..." I've checked my logs and there doesn't seem to be anything coming through to my end. Does anybody have an idea of whats going on here? I would love for it to be a problem on my end, because justhost doesn't seem capable of helping further. Any help is greatly appreciated, thanks. I forgot to mention that we have several other sites up and running and completely accessible.

  Read the article

• Android webbrowser returns code 500 for webpage on Nginx webserver

  - by Paxxil

  Hey! I've come to a very weird behavior of a web browser on android mobile phone (I've tried HTC Wildfire and HTC Desire phones). I have a web server with Nginx v0.8.54. When i try to open a web page on the phone it shows me error: The requested item could not be loaded! (Status code: 500) BUT it only happens when I am requesting page through Mobile network. On Wifi it works just fine .... but there is more .... if I stop Nginx and start Apache web server it works just fine on both Mobile network and wifi. I've also tried other mobile network and it is the same behavior. Some server stats: Firewall is OFF Selinux is OFF the web page (using Nginx web server) opens normally on any other browser (IE, FF, Opera, Chrome, Safari) on the laptop or PC Nothing in nginx error.log This is the only entry in access.log when the page is requested: xxx.xxx.xxx.xxx - - [17/Mar/2011:11:19:49 -0500] 200 "GET / HTTP/1.1" 27405 "-" "Mozilla/5.0 (Linux; U; Android 2.2; en-gb; Desire_A8181 Build/FRF91) AppleWebKit/533.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" "-" index.html has only "Hello World" string in it. There is no fishy javascript or anything else. .... but there is even more.... if i open the same page on another server, with the same Nginx build, with the same server and web server configuration.... it opens just fine. if anyone has any idea on what may be going on, i would really appreciate it if you let me know. Thanks! EDIT: i forgot to mention that page opens OK on Iphone and Nokia

  Read the article

• Windows Explorer Hangs on Right-Click

  - by Bryan

  I am not sure if this is the right site to post this one as I typically post coding questions on stackoverflow. But I'll ask anyways and hopefully someone can move it if it's incorrect. Currently I have a customer built PC, utilizing an Intel i7 chip, 1300WATT PSU, 8Gigs of RAM, and two video cards. Originally I had the one video card (NVIDIA) that used the PSU and had two DVI output. After purchasing a third monitor I installed another ATI) graphics card not needed any PSU connectors. After installing and restarting, I noticed that when I right-click on my desktop, or through Windows Explorer it will hang, freeze then restarted. Sometimes after Windows Explorer restarts the problem dissipates. I checked to make sure everything was connected properly and it was. I repaired the ATI Catalyst Control Center to see if that had an issue, and I checked to see if either video card required updated drivers. Nothing worked. I tried restarting my PC and that didn't work. I tried using ShellXView (I forgot what it's actually called) and tried closed processes but that didn't work. Does anyone have any idea what could have caused this orpossible solutions I should try?< Thanks in advance.

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >