Search Results

Search found 936 results on 38 pages for 'noob lurker'.

Page 28/38 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Address (url) forwarding with Vyatta

    - by Trikks
    Got this kind of noob question i suppose. I got this very basic network setup and need help to set up some address forwarding. As seen in my illustration below all traffic enters via the eth0 interface (85.123.32.23). The external dns is setup to direct all hosts to this ip as well. Now, how on earth do I filter the incoming requests to each box? The Ip's are static! My network layout: I do not wish to solve this by assigning tons of ports etc. In my wishful thinking something like this would be nice :) set service nat rule 10 type destination set service nat rule 10 inbound-interface eth0 set service nat rule 10 destination address ftp.myhost.com set service nat rule 10 inside-address address 192.168.100.20 This way ALL traffic to the address ftp.myhost.com (at eth0) should be routed to the internal ip, 192.168.100.20. Right, is there anyone who could point in some direction? Maybe it's wrong to use nat? Please help me! :)

    Read the article

  • CENTOS 6 - How to install php-mysql when php-common @remi is present?

    - by Multitut
    I am having troubles adding mysql support for my php installation, this installation was made using a ready to use-package that came with our VPS. This is my php.info: http://snake.quetzalcoatech.com/info.php I am trying to install php mysql using: yum install php-mysql And get this output: Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile * base: mirrors.serveraxis.net * extras: mirror.fdcservers.net * updates: bay.uchicago.edu Setting up Install Process Resolving Dependencies --> Running transaction check ---> Package php-mysql.x86_64 0:5.3.3-14.el6_3 will be installed --> Processing Dependency: php-common = 5.3.3-14.el6_3 for package: php-mysql-5.3.3-14.el6_3.x86_64 --> Finished Dependency Resolution Error: Package: php-mysql-5.3.3-14.el6_3.x86_64 (updates) Requires: php-common = 5.3.3-14.el6_3 Installed: php-common-5.3.17-2.el6.remi.x86_64 (@remi) php-common = 5.3.17-2.el6.remi Available: php-common-5.3.3-3.el6_2.8.x86_64 (base) php-common = 5.3.3-3.el6_2.8 Available: php-common-5.3.3-14.el6_3.x86_64 (updates) php-common = 5.3.3-14.el6_3 You could try using --skip-broken to work around the problem You could try running: rpm -Va --nofiles --nodigest I am a noob using Linux, so could you tell me which command should I use to install a compatible php-mysql module? Thank you so much!

    Read the article

  • laptop motherboard "shorts" when connected to adapter

    - by Bash
    Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely Accessing IP restricted server from dynamic IP which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was Static IP for dynamic IP the first answer seems exactly what I need but I dont know how I would go about doing the same on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • access an IP restricted service from a dynamic IP (Broadband modem) on a windows machine

    - by Joel Alenchery
    Hi, I dont know if this is the correct place to ask this question but here goes .. (please note that I am pretty much a newbie in terms of networking and I work primarily on the windows platform) I have been working on accessing and consuming some web services in C#/ASP.Net, these web services that I consume are IP restricted. Currently they allow access only from my work network (we have a static ip set up through which all our internet requests are routed). Every now and then we have people who go out and about and are stuck with using a usb dongle based internet connection and hence are not able to now access these web services that they are working on. What I would like to do is to provide some way for these remote workers to access the IP restricted web services using the static ip at our office. For example when the remote worker tries to access a service say http://exampleService.com .. the request gets routed to some box at our office and then out to the actual service. That way the service always sees the static ip of the office and not the dynamic ip that the remote user is actually using. I have done a fair bit of googling and its difficult to search for it as most of the results come back for dynamic DNS which is not really what I am looking for. I have also looked at a couple of posts on here namely http://serverfault.com/questions/187231/accessing-ip-restricted-server-from-dynamic-ip which does provide some insight but the fellow seems to have access to the source that does the ip restriction and is able to change the restrictions. In my case i dont have that access. another one that looked interesting was http://serverfault.com/questions/136806/static-ip-for-dynamic-ip the first answer seems exactly what I need but I dont know how I would go about on a windows machine. any help would be really appreciated. (am sorry about being soo noob-ish) PS: Right now everyone is using RDC/LogMeIn to access an internet connected machine in the office to manually check the webservice and getting work done. Which is a very tedious process.

    Read the article

  • What would keep a Microsoft Word AutoNew() macro from running?

    - by Chris Nelson
    I'm using Microsoft Office 2003 and creating a bunch of template documents to standardize some tasks. I know it's standard practice to put the templates in an certain place Office expects to find them but that won't work for me. What I want is to have "My Template Foo.dot" and "My Template Bar.dot", etc. in the "My Foo Bar Stuff" on a shared drive and users will double click on the template to create a new Foo or Bar. What's I'd really like is for the user to double click on the Foo template and be prompted for a couple of items related to their task (e.g., a project number) and have a script in the template change the name that Save will default to something like "Foo for Project 1234.doc". I asked on Google Groups and got an answer that worked....for a while. Then my AutoNew macro stopped kicking in when I created a new document by double clicking on the template. I have no idea why or how to debug it. I'm a software engineering with 25+ years of experience but a complete Office automation noob. Specific solutions and pointers to "this is how to automate Word" FAQs are welcome. Thanks.

    Read the article

  • Bash mine script, please

    - by HomelyPoet
    The script, in and of its self, is fairly self-explanatory. Use if You so desire; any and all criticism wouldst be appreciated, as wouldst any suggestions for improvement. First iteration was writ upon OS X 10.5.8 Leopard, current iteration was run upon OS X 10.6.4 Snow Leopard with Safari 5.0.2 (6533.18.5). Also, any illumination as to why the first line ' if [ -f ] ' works, but ' if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] ' generates an error? [yes, I am a bit of a Noob] Code: #! /bin/bash # SafariClear0.0.6 if [ -f ] then cat /dev/null > ~/Library/Safari/LocalStorage/*.localstorage rm -f ~/Library/Safari/LocalStorage/*.localstorage fi if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] then echo "Oy vey!" fi cd ~/Library/Safari/ cat /dev/null > WebpageIcons.db cat /dev/null > TopSites.plist cat /dev/null > LocationPermissions.plist cat /dev/null > LastSession.plist cat /dev/null > History.plist echo "Clear" exit

    Read the article

  • Mirror a Dropbox repository in Sharepoint and restrict access

    - by Dan Robson
    I'm looking for an elegant way to solve the following problem: My development team uses Dropbox for sharing documents amongst our immediate group. We'd like to put some of those documents into a SharePoint repository for the larger group to be able to access, as granting Dropbox access to the group at large is not ideal. However, we'd like to continue to be able to propagate changes to the SharePoint site simply by updating the files in Dropbox on our local client machines, and also vice versa - users granted access on SharePoint that update files in that workspace should be able to save their files and the changes should appear automatically on our client PC's. I've already done the organization of the folders so that in Dropbox, there exists a SharePoint folder that looks something like this: SharePoint ----Team --------Restricted Access Folders ----Organization --------Open Access Folders The Dropbox master account and the SharePoint master account are both set up on my file server. Unfortunately, Dropbox doesn't seem to allow syncing of folders anywhere above the \Dropbox\ part of the file system's hierarchy - or all I would have to do is find where the Sharepoint repository is maintained locally, and I'd be golden. So it seems I have to do some sort of 2-way synchronization between the Dropbox folder on the file server and the SharePoint folder on the file server. I messed around with Microsoft SyncToy, but it seems to be lacking in the area of real-time updating - and as much as I love rsync, I've had nothing but bad luck with it on Windows, and again, it has to be kicked off manually or through Task Scheduler - and I just have a feeling if I go down that route, it's only a matter of time before I get conflicts all over the place in either Dropbox, SharePoint, or both. I really want something that's going to watch both folders, and when one item changes, the other automatically updates in "real-time". It's quite possible I'm going down the entirely wrong route, which is why I'm asking the question. For simplicity's sake, I'll restate the goal: To be able to update Dropbox and have it viewable on the SharePoint site, or to update the SharePoint site and have it viewable in Dropbox. And since I'm a SharePoint noob, I'll also need help hiding the "Team" subfolder from everyone not in a specific group in AD.

    Read the article

  • Problems using Mesa demos

    - by Rodnower
    Hello, I successfully installed Mesa with "yum install Mesa*" and downloaded MesaDemos-7.8.tar.gz archive. Now I try follow instructions from "Mesa3d.org - Download / Insall - Compiling and Installing - 1.5 Running the demos", but in progs/demos there is only *.c files, when I try to compile them, I get many similar errors like: gears.c:(.text+0x54): undefined reference to `glShadeModel' I guess that this is very noob question, and I understand that there is very simple solution, but I haven't any idea... In beggining of the file there are all necessary #includes: #include <math.h> #include <stdlib.h> #include <stdio.h> #include <string.h> #include <GL/glut.h> So I have some questions: Is there some Mesa forum on the web? Is there some compiled demos? Is there some site with well described examples of Mesa using? What I need for compile those examples? I have CentOS 5 Thank you for ahead.

    Read the article

  • Servers in DMZ will not communicate with each other

    - by Tukaro
    (Full disclosure: I rate barely above "noob" when it comes to networking.) My workplace recent got a new web server. Since we're nearing the end of an overhaul of our website, we're doing a slooooow migration between the old web server and the new one. The old webserver (we'll call it SERVOLD) is Windows Server 2008 with IIS 7. It does not have SQL Server installed. The new server (SERVNEW) is Windows Server 2008 R2, IIS 7.5, with the same version of SQL Server installed. Both are located in the DMZ for our network, and both have their own outward-facing IP address (.3 and .4, respectively). Each server can communicate fine with computers within the domain (not in the DMZ), and those same computers have no trouble communicating with either server. Both servers are also accessible from the internet just fine. However, no matter what, these two servers just refuse to recognize each other. They have the same Workgroup name listed (WORKGROUP), and I thought that would be enough for them to recognize each other. What needs to happen such that I can get these two servers to communicate with each other? We want to do a gradual roll-over to the new website (new one uses ASP.NET, old one uses CFMX), so being able to use one database between both servers is a necessity. Thanks!

    Read the article

  • How to configure SCSI hard drives and RAID for Poweredge 2850 web server

    - by Saul
    I'm trying to set up a Poweredge 2850 as a web server, but as a server novice it's causing me some confusion. Its a virgin install so no data to be lost as yet, so I'd like to get the best arrangement for setting up Windows Server 2008. The box will run IIS, a mail and FTP server. The current physical arrangement of the hot swap drives is 1 73GB 3 146GB 5 blank 0 73GB 2 146GB 4 146GB (but flashes green, amber off) When I enter the PERC config screens on boot up I've got Raid Ch- 0 ID 0 ONLIN A00-00 1 ONLIN A00-01 2 ONLIN A01-00 3 ONLIN A01-01 4 HOTSP I think that drives 0 and 1 are set to RAID 1 and drives 2 and 3 are also set to RAID 1, certainly I can see 2 logical drives, both raid 1 of 69880MB and 139900MB Now what I think I am getting here is that the 2 73GB drives mirror each other and the 2 146GB drives mirror 2? so by my noob thinking if a drive fails I can pull it, insert and new one and it will reduplicate from its matching pair? I think the flashing amber probably indicates a failing drive in slot 4, should that just be binned? What confuses me coming from a home user XP background is that when I load up Windows Server 2008 OS under my computer I only see a C drive of about 70GB capacity. i.e wheres the 146GB drive? Any advice appreciated

    Read the article

  • How can I parse/ transform text log data before it gets captured in SCOM 2007 R2?

    - by Abs
    I'm pretty much a noob with System Center Operations Manager 2007, and I'm probably missing something pretty basic, but I'm stumped anyway. We're setting up monitoring on some of our servers, and we'd like to capture data from some plain text log files (e.g. DNS debug logs, DHCP logs). It looks to me like I can set up a generic text file monitoring rule and get events captured into the main Ops Manager database, but my understanding is that the whole line of text from the plain text log gets captured as one field. In an ideal world, we'd be able to parse or transform that log file data to make it easier to query later. Is this possible? Is it easy? Do I have to buy expensive 3rd-party software to do it? One more thing: it would be even better if there was a way to stuff this data into the Audit Collection Services (ACS) database instead of the main one, but I'll take what I can get. Any help would be greatly appreciated.

    Read the article

  • Setting up Red Hat Enterprise Linux Server as a mail exchange server

    - by Syedur
    I am a Unix/Linux/Windows Server noob. So, keep that in mind before you throw your stones at my glass house. :P I have a Windows Server 2008 R2 machine that's acting as domain controller, Server A. It's also running a DNS server. I have a Red Hat Enterprise Linux Server 5.3, Server B that is intended for mail server. In order for the mail delivery to happen, I understand that I have to set an MX record on Server A and point it to Server B. Well, I did. I manually added a host name on Server A and pointed to Server B's IP address. Then I added an MX record and pointed it to the host name. That didn't do the trick. After taking the above steps, I used the "dig" command on Server B to lookup the MX record coming back from Server A and it wasn't what I was expecting. What am I doing wrong here? I have noticed that... my Windows machines that are joined to the domain (Server A) are listed under the host names. The machines that are not joined to the domain are not list. This is fine, I am not worried about this. What does concern me, do I have to join the Server B to domain in order for Server A to recognize as a valid host and forward the MX properly? If so, some simple steps on how to join Server B to the domain would also help.

    Read the article

  • What are the attack vectors for passwords sent over http?

    - by KevinM
    I am trying to convince a customer to pay for SSL for a web site that requires login. I want to make sure I correctly understand the major scenarios in which someone can see the passwords that are being sent. My understanding is that at any of the hops along the way can use a packet analyzer to view what is being sent. This seems to require that any hacker (or their malware/botnet) be on the same subnet as any of the hops the packet takes to arrive at its destination. Is that right? Assuming some flavor of this subnet requirement holds true, do I need to worry about all the hops or just the first one? The first one I can obviously worry about if they're on a public Wifi network since anyone could be listening in. Should I be worried about what's going on in subnets that packets will travel across outside this? I don't know a ton about network traffic, but I would assume it's flowing through data centers of major carriers and there's not a lot of juicy attack vectors there, but please correct me if I am wrong. Are there other vectors to be worried about outside of someone listening with a packet analyzer? I am a networking and security noob, so please feel free to set me straight if I am using the wrong terminology in any of this.

    Read the article

  • Subdomains and address bar

    - by Priednis
    I have a fairly noob question about how subdomains work. As I understand at first the DNS server specifies that a request for certain subdomain.domain.com has to go to the IP address of domain.com, and the webserver at domain.com further processes the request and displays the needed subdomain page. It is not entirely clear to me how (for example Apache) server does it. As I understand there can be entries in vhosts.conf file which specify folders that contain the subdomain data. Something like: <VirtualHost *> ServerName www.domain.com DocumentRoot /home/httpd/htdocs/ </VirtualHost> <VirtualHost *> ServerName subdomain.domain.com DocumentRoot /home/httpd/htdocs/subdomain/ </VirtualHost> and there also can be redirect entries in .htaccess files like rewritecond %{http_host} ^subdomain.domain.com [nc] rewriterule ^(.*)$ http://www.domain.com/subdomain/ [r=301,nc] however in this case the user gets directed to the directory which contains the subdomain data but the user gets "out" of the subdomain. I would like to know - how, when going to subdomain.domain.com the subdomain.domain.com, beginning of address remains visible in the address bar of the explorer? Can it be done by an alternate entry in .htaccess file? If a VirtualHost entry is specified in the vhosts.conf file, does it mean, that a new user account has to be specified for access to this directory?

    Read the article

  • ESX 4.0 space: DASD, NAS, or ?

    - by thormj
    I put together an ESX box for better management, but its performance is a WTF item; I'm a noob at dealing with ESX, so I'm looking for a laundry-list of reading material to help me straighten this out so I can go back to .NET programming. Current storage system: We're running Raid5+Hotspare (8x500 GB spindles) on a PERC6i on a Dell 2910. Due to ESX limitatios, the PERC is showing the storage as 1x2TB + 1x800GB "partitions." I'm not sure of the setup's configuration (stride / stripe / ???) at all. Our Applications We have a SBS server as well as a minor (2x50 GB, but growing at 10GB/month) database server... Our application that lives on the database VM is CPU and I/O insense; it's a database churning excercise mixed in with a lot of computation on the data (fixing that performance is what I'm supposed to be working on)... Perfomance Issue When I do a backup, restore, or worse (copy a backup from 1 vm to another to move it to the QA VM), the entire system slows to a crawl (even "unrelated" VMs). I originally thought a DASD situation would be quite good since you had PCI-x bandwidth, but the systemwide slowdown is killing productivity. Questions What should I do to make an intelligent decision about NAS vs RAID vs SAN vs DASD? Are there sweet spots/ugly spots in the storage setup? Can you use a SSD PCI-X card in ESX for the tempdb? Good/Bad idea? Is there any way to "share" some image in a copy-on-write fashion? Most of the "Backup-Copy-Restore" is to "put a clean image on the dev boxes"; if I could have them "share" the master image, the "big copy" (2x50 GB) would only need to be done once per week instead of once per dev per week...[runtime performance isn't a concern with the dev boxes, but the backup/copy/restore kills production, SBS, and everything else on the box]

    Read the article

  • IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing problem

    - by Ernest Mueller
    Hey all, I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

    Read the article

  • Error creating ODBC connection to SQL Server 2008 Express

    - by DavidB
    When creating a System DSN, I get the error: Connection failed: SQLState: '08001' SQL Server Error: 2 [Microsoft][SQL Server Native Client 10.0]Named Pipes Provider: Could not open a connection to SQL Server [2]. Connection failed: SQLState: 'HYT00' SQL Server Error: 0 [Microsoft][SQL Server Native Client 10.0]Login timeout expired I'm running Vista Home Premium 64-bit SP2, and installed SQL Server 2008 Express Advanced without errors. I'll be using the database locally for an app installed on the same PC. I'm able to successfully connect with SQL Server Management Studio using Windows Authentication (my Windows account is a member of local Administrators), and I can successfully create a database with default ownership (defaults to my Windows account). SQL Server Configuration Manager shows that Shared Memory, TCP/IP, and Named Pipes are enabled for SQL Native Client 10.0 Configuration, SQL Native Client 10.0 Configuration (32bit), and SQL Server Network Configuration (SQLEXPRESS). The SQL Server (SQLEXPRESS) and SQL Server Reporting Services (SQLEXPRESS) services are running. When I create a system DSN, my driver choices are SQL server (sqlsrv32.dll 4-10-09), which gives a generic wizard, and SQL Server Native Client 10.0 (sqlncli10.dll 7-10-08), which gives the SQL Server 2008 wizard. I choose the latter. I enter name, description, and have tried both MyPCName and 127.0.0.1 for the server name (browsing turns up nothing). After clicking Next, I leave it at Integrated Windows authentication, and leave Connect to server for additional options checked. After clicking Next, I get the error above. I know it's probably a simple answer, (permission issue?) and I'm a SQL noob, so I appreciate anything that would point me in the right direction. Thanks!

    Read the article

  • Single computer on network cannot connect to internet.

    - by user34630
    Hi All, I hope you can help me out! :) I have 3 computers and one device (Xbox) on my home network; 2 running XP and one on Vista. The computer that can't connect to the internet (XP) is old and failing, and shows no warning before it completely runs out of battery. Thus today, I started it up forgetting that I had unplugged it the night before, and it just ran out of battery entirely whilst I was using it and died. I think that before this I had been browsing the internet, but I can't remember for certain. (i.e. The problem I am having may or may not have been caused by this 'hard' power off). Anyway, now when I start the computer up it takes 5-10 minutes after logging on to display the start bar and icons. Also, I cannot browse the internet. The computer seems to connect to the network OK (I have tried both wired and wireless), but I can't visit sites and can't ping web addresses. Pinging the router fails, as does pinging another of my computers on the network. I have never encountered something like this before, and whilst I am no noob I am also not a sysadmin, haha. :( Any help is greatly appreciated, thank you for your time. P.S. I have tried a system restore (newbie move?).

    Read the article

  • Bluescreen Stop 0x00000027 RDR_FILE_SYSTEM after cloning system on new HDD

    - by Daniel
    A couple of months ago I got a new 500GB HDD for my no-name-brand Laptop PC and I cloned the complete Win 7 Pro 32bit system with clonezilla from the old 70GB drive to the new one. At first everything was great, the new driver was immediately updated. But since then I get on a more and more frequent level (used to be every 2-3 days, but now it's more like 2-3 times a day) a BSOD Stop error. From the eventlog in Windows I know that there are two different error codes sppoking aroung: 0x00000027 (0xbaad0073, 0x9954f80c, 0x9954f3f0, 0x8ecd7c82) RDR_FILE_SYSTEM 0x00000044 (0x85443230, 0x00000eae, 0x00000000, 0x00000000) MULTIPLE_IRP_COMPLETE_REQUESTS I checked for viruses and did a complete HDD check using the Windows tool and WesternDigital tool (which is the producer of the new HDD) without results. I also looked for driver updates but couldn't find any. The name of the HDD as shown in the device manager is: WDC WD5000BPVT-00HXZT1 ATA Device. I'm really a noob regarding those kind of problems, so if you have any idea what I can try without losing all my data, let me know. Also, if any additional information are required.

    Read the article

  • What is a good WordPress theme for long Objective-C code samples [closed]

    - by willc2
    As some of you iPhone developers know, Objective-C can be a verbose language. Long, descriptive variable and method names are the norm. I'm not complaining, it makes code easier to read and code completion makes it easy to type. But damn! Check out this method name for getting a cell in a table view: -(UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath; I have a WordPress blog where I publish my code samples as I'm learning the language. One thing I hate on other blogs is how the code won't fit in a column without that scroll bar or without wrapping around. It really made it hard for me to read and comprehend method names back when I was a super-noob (six months ago). Right now I use the clean-looking Fazyvo 1.0 theme by noonnoo. I love the look of it but the columns are just too narrow and it doesn't have support for wider ones. I could hand-modify it but then I'd have to maintain/redo those changes every time I updated it. Instead, I'm looking for a nice theme that has width control built-in and looks good at larger font sizes. Can anyone help? Note: I use WP-CodeBox for code syntax highlighting.

    Read the article

  • Connecting jconsole using SOCKS to Amazon EC2

    - by freshfunk
    I'm trying to use jconsole to view stats on an EC2 instance by using a socks proxy created by SSH. I've tried the various scripts mentioned in the links below but to no avail: http://simplygenius.com/2010/08/jconsole-via-socks-ssh-tunnel.html http://gabrielcain.com/blog/2010/11/02/using-ssh-proxying-to-connect-jconsole-to-remote-cassandra-instances/ I'm running ssh -f -ND 8123 myuser@mymachine and verified that at least Firefox goes through it as a proxy. I then run jconsole -J-DsocksProxyHost=localhost -J-DsocksProxyPort=8123 service:jmx:rmi:///jndi/rmi://ec2-XX-XX-XXX-XXX.compute-1.amazonaws.com:8080/jmxrmi I run netstat -n on my EC2 instance and I see a connection created by my machine. However, the connection eventually disappears and I get a 'channel 2: open failed: connect failed: Operation timed out' from my ssh tunnel. I've opened the jmx port through the security group and I've checked the port on the EC2 instance to make sure it's open (by telnet-ing to it). I'm not sure where to look next. Are there some properties in sshd_config or ssh_config I need to enable for tunneling? Or anything in Mac OS X? I feel like a serious noob but sys administration is really not my strong point. I've spent several hours and can't get this to work.

    Read the article

  • IPSec Tunnel to Amazon EC2 - Netkey, NAT, and routing issue

    - by Ernest Mueller
    I'm working on getting an IPSec VPN working between Amazon EC2 and my on-premise. The goal is to be able to safely administer stuff, up/download data, etc. over that tunnel. I have gotten the tunnel up in openswan between a Fedora 12 instance with an elastic IP and a Cisco router that's also NATted. I think the ipsec part is OK, but I'm having trouble figuring out how to route traffic that way; there's no "ipsec0" virutal interface because on Amazon you have to use netkey and not KLIPS for the vpn. I hear iptables may be required and I'm an iptables noob. On the left (Amazon), I have a 10. network. Box 1 is privately 10.254.110.A, publically IP 184.73.168.B. Netkey tunnel is up. Box 2 is publically 130.164.26.C, privately 130.164.0.D And my .conf is: conn ni type= tunnel authby= secret left= 10.254.110.A leftid= 184.73.168.B leftnexthop= %defaultroute leftsubnet= 10.254.0.0/32 right= 130.164.26.C rightid= 130.164.0.D rightnexthop= %defaultroute rightsubnet= 130.164.0.0/18 keyexchange= ike pfs= no auto= start keyingtries= 3 disablearrivalcheck=no ikelifetime= 240m auth= esp compress= no keylife= 60m forceencaps= yes esp= 3des-md5 I added a route to box 1 (130.164.0.0/18 via 10.254.110.A dev eth0) but that doesn't do it for predictable reasons, when I traceroute the traffic's still going "around" and not through the vpn. Routing table: 10.254.110.0/23 dev eth0 proto kernel scope link src 10.254.110.A 130.164.0.0/18 via 10.254.110.178 dev eth0 src 10.254.110.A 169.254.0.0/16 dev eth0 scope link metric 1002 Anyone know how to do the routing with a netkey ipsec tunnel where both sides are NATted? Thanks...

    Read the article

  • Installing mysqlnd for php 5.4.9 on CentOs 6.3

    - by kira423
    Okay let me get straight to the point, I am a complete noob, and have never done stuff like this at all, I have read tutorial after tuorial but I cant get anything to work. When I tried to install the rpm file I got this error rpm -Uvh ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rpms.famillecollet.com/enterprise/6/test/x86_64/php-mysqlnd-5.4.9-1.el6.remi.x86_64.rpm warning: /var/tmp/rpm-tmp.ez4vvd: Header V3 DSA/SHA1 Signature, key ID 00f97f56: NOKEY error: Failed dependencies: php-pdo(x86-64) = 5.4.9-1.el6.remi is needed by php-mysqlnd-5.4.9-1.el6.remi.x86_64 so I tried installing that rpm file and got this error rpm -ivh ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm Retrieving ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm curl: (9) Server denied you to change to the given directory error: skipping ftp://ftp.pbone.net/mirror/rrpms.famillecollet.com/enterprise/6/test/x86_64/php-pdo-5.4.6-1.el6.remi.x86_64.rpm - transfer failed I used the ftp links because I have no idea how else to get them to the server. I think I am getting overly frustrated with this, but I have to get this driver installed for any of my scripts to function correctly. Any help would be greatly appreciated!

    Read the article

  • NGINX Configuration Error using Codex Example: Is This a Typo in Codex?

    - by jw60660
    I installed NGINX using this tutorial: C3M Digital NGINX Tuturial but after reading this article on security issues with "cut and paste" configuration tutorials: Neal Poole's article regarding security and NGINX configuration I decided to follow Poole's suggestion to use the configuration suggested in the WordPress codex: Codex on NGINX Configuration I used the Codex configuration for a multisite installation using W3 Total Cache. When attempting to start NGINX I get an error saying that the /etc/nginx/nginx.conf test failed. The error message was: "Restarting nginx: nginx: [emerg] unknown directive "//" in /etc/nginx/sites-enabled/teambrazil.com:18" When I looked at my site specific configuration at that path I noticed the rewrite rule in the server block was: rewrite ^ $scheme://teambrazil.conf$request_uri redirect; That line in the Codex example was: rewrite ^ $scheme://mysite.conf$request_uri redirect; That looked like a mistake to me, and I changed my line to: rewrite ^ $scheme://teambrazil.com$request_uri redirect; I then attempted to restart NGINX but got the same error message. My question is: is that a mistake, and is there anything more I have to do aside from restarting NGINX after making this change. As suggested by both tutorials I set up the directories: /etc/nginx/sites-enabled and /etc/nginx/sites-available and created the appropriate symbolic links using: touch /etc/nginx/sites-available/teambrazil.com ln -s /etc/nginx/sites-available/teambrazil.com /etc/nginx/sites-enabled/teambrazil.com Is there something else I need to consider after making this correction? Or was it not an error in the first place? I'm pretty stuck here. BTW, I am using Debian squeeze as an OS on Amerinoc's VPS. I'm just getting familiar with VPS administration and am pretty much a noob. Thanks very much, would appreciate any input.

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >