Search Results

Search found 1190 results on 48 pages for 'sinister clock'.

Page 28/48 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Unable to connect to Wireless after installing Ubuntu 12.10

  - by Moulik

  I am using Asus U56E laptop and after installing Ubuntu 12.10 alongside Windows 8, I am unable to connect to the Wireless. I have been trying to solve this problem since two weeks and couldn't solve it. Please help. Any answer would be appreciated. Here are some command-line results. lspci -v | grep -iA 7 network ubuntu@ubuntu:~$ lspci -v | grep -iA 7 network 02:00.0 Network controller: Intel Corporation Centrino Wireless-N + WiMAX 6150 (rev 67) Subsystem: Intel Corporation Centrino Wireless-N + WiMAX 6150 BGN Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at de800000 (64-bit, non-prefetchable) [size=8K] Capabilities: <access denied> Kernel driver in use: iwlwifi Kernel modules: iwlwifi lsmod | grep iwlwifi ubuntu@ubuntu:~$ lsmod | grep iwlwifi iwlwifi 386826 0 mac80211 539908 1 iwlwifi cfg80211 206566 2 iwlwifi,mac80211 ubuntu@ubuntu:~$ dmesg | grep iwlwifi [ 57.846261] iwlwifi: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree: [ 57.846264] iwlwifi: Copyright(c) 2003-2012 Intel Corporation [ 57.846336] iwlwifi 0000:02:00.0: >pci_resource_len = 0x00002000 [ 57.846338] iwlwifi 0000:02:00.0: >pci_resource_base = ffffc90000c7c000 [ 57.846341] iwlwifi 0000:02:00.0: >HW Revision ID = 0x67 [ 57.846438] iwlwifi 0000:02:00.0: >irq 52 for MSI/MSI-X [ 59.558335] iwlwifi 0000:02:00.0: >loaded firmware version 41.28.5.1 build 33926 [ 59.558514] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUG disabled [ 59.558516] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEBUGFS enabled [ 59.558517] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TRACING enabled [ 59.558519] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [ 59.558520] iwlwifi 0000:02:00.0: >CONFIG_IWLWIFI_P2P disabled [ 59.558522] iwlwifi 0000:02:00.0: >Detected Intel(R) Centrino(R) Wireless-N + WiMAX 6150 BGN, REV=0x84 [ 59.558583] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 59.569083] iwlwifi 0000:02:00.0: >device EEPROM VER=0x557, CALIB=0x6 [ 59.569085] iwlwifi 0000:02:00.0: >Device SKU: 0x150 [ 59.569087] iwlwifi 0000:02:00.0: >Valid Tx ant: 0x1, Valid Rx ant: 0x3 [ 59.569100] iwlwifi 0000:02:00.0: >Tunable channels: 13 802.11bg, 0 802.11a channels [ 70.208469] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.208648] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 [ 70.366319] iwlwifi 0000:02:00.0: >L1 Disabled; Enabling L0S [ 70.366470] iwlwifi 0000:02:00.0: >Radio type=0x1-0x2-0x0 sudo lshw -c network ubuntu@ubuntu:~$ sudo lshw -c network *-network description: Wireless interface product: Centrino Wireless-N + WiMAX 6150 vendor: Intel Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 67 serial: 40:25:c2:84:99:c4 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.5.0-17-generic firmware=41.28.5.1 build 33926 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:52 memory:de800000-de801fff *-network description: Ethernet interface product: AR8151 v2.0 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 54:04:a6:2b:6a:ef capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI latency=0 link=no multicast=yes port=twisted pair resources: irq:54 memory:dd400000-dd43ffff ioport:a000(size=128) ifconfig ubuntu@ubuntu:~$ ifconfig eth0 Link encap:Ethernet HWaddr 54:04:a6:2b:6a:ef UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:176 errors:0 dropped:0 overruns:0 frame:0 TX packets:176 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:14368 (14.3 KB) TX bytes:14368 (14.3 KB) wlan0 Link encap:Ethernet HWaddr 40:25:c2:84:99:c4 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) iwconfig ubuntu@ubuntu:~$ iwconfig eth0 no wireless extensions. lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off iwlist scan ubuntu@ubuntu:~$ iwlist scan eth0 Interface doesn't support scanning. lo Interface doesn't support scanning. wlan0 No scan results nm-tool ubuntu@ubuntu:~$ nm-tool NetworkManager Tool State: disconnected - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 54:04:A6:2B:6A:EF Capabilities: Carrier Detect: yes Wired Properties Carrier: off - Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: iwlwifi State: disconnected Default: no HW Address: 40:25:C2:84:99:C4 Capabilities: Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points hypeness2: Infra, 00:21:29:DA:08:4F, Freq 2462 MHz, Rate 54 Mb/s, Strength 42 WPA love: Infra, 68:7F:74:17:02:66, Freq 2412 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 DIRECT-MwSCX-3400Pamela: Infra, 02:15:99:A3:3F:AC, Freq 2412 MHz, Rate 54 Mb/s, Strength 22 WPA2 router: Infra, 1C:AF:F7:D6:76:F3, Freq 2417 MHz, Rate 54 Mb/s, Strength 20 WPA2 wing: Infra, E8:40:F2:34:E4:F7, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 132LINKSYS: Infra, 00:1A:70:80:1F:E9, Freq 2437 MHz, Rate 54 Mb/s, Strength 57 WEP VMITTAL: Infra, E0:46:9A:3C:F0:C4, Freq 2412 MHz, Rate 54 Mb/s, Strength 27 WEP HP-Print-10-LaserJet 1025: Infra, 7C:E9:D3:7E:F8:10, Freq 2437 MHz, Rate 54 Mb/s, Strength 59 ACNBB: Infra, 00:26:75:22:A6:2F, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 SATKAIVAL: Infra, 00:18:E7:CE:69:A6, Freq 2412 MHz, Rate 54 Mb/s, Strength 69 WPA WPA2 hypeness: Infra, B8:E6:25:24:C3:B1, Freq 2437 MHz, Rate 54 Mb/s, Strength 54 WPA WPA2 CSNetwork: Infra, BC:14:01:58:C5:88, Freq 2437 MHz, Rate 54 Mb/s, Strength 25 WPA WPA2 tharma: Infra, BC:14:01:E2:06:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 15 WPA WPA2 Active2.4: Infra, 10:6F:3F:0E:F3:8E, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 ACNBB: Infra, 00:26:75:58:4E:7A, Freq 2437 MHz, Rate 54 Mb/s, Strength 85 KO: Infra, BC:14:01:2E:AF:A8, Freq 2452 MHz, Rate 54 Mb/s, Strength 22 WPA WPA2 FEAR: Infra, 00:18:4D:C0:BC:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA Pamela: Infra, BC:14:01:52:F6:F8, Freq 2412 MHz, Rate 54 Mb/s, Strength 24 WPA WPA2 bvrk2: Infra, 78:CD:8E:7B:3C:79, Freq 2457 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 BELL030: Infra, D8:6C:E9:17:AF:09, Freq 2462 MHz, Rate 54 Mb/s, Strength 22 WPA2 Desai: Infra, 00:1D:7E:52:FB:C5, Freq 2437 MHz, Rate 54 Mb/s, Strength 14 WEP Sritharan: Infra, BC:14:01:E5:59:78, Freq 2462 MHz, Rate 54 Mb/s, Strength 19 WPA WPA2 PFN: Infra, 00:13:10:8B:CF:45, Freq 2437 MHz, Rate 54 Mb/s, Strength 19 WEP rfkill list all ubuntu@ubuntu:~$ rfkill list all 0: asus-wlan: Wireless LAN Soft blocked: no Hard blocked: no 1: asus-wimax: WiMAX Soft blocked: yes Hard blocked: no 2: phy0: Wireless LAN Soft blocked: no Hard blocked: no so these are some more results sudo modprobe -r iwlwifi ubuntu@ubuntu:~$ sudo modprobe -r iwlwifi sudo modprobe iwlwifi 11n_disable=1 ubuntu@ubuntu:~$ sudo modprobe iwlwifi 11n_disable=1 echo "blacklist asus_wmi" | sudo tee -a /etcmodprobe.d/blacklist.conf ubuntu@ubuntu:~$ echo "blacklist asus_wmi" | sudo tee -a /etc/modprobe.d/blacklist.conf blacklist asus_wmi echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf ubuntu@ubuntu:~$ echo "options iwlwifi 11n_disable=1" | sudo tee /etc/modprobe.d/iwlwifi.conf options iwlwifi 11n_disable=1 sudo modprobe -rfv iwlwifi ubuntu@ubuntu:~$ sudo modprobe -rfv iwlwifi rmmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko rmmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko sudo modprobe -v iwlwifi ubuntu@ubuntu:~$ sudo modprobe -v iwlwifi insmod /lib/modules/3.5.0-17-generic/kernel/net/wireless/cfg80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/net/mac80211/mac80211.ko insmod /lib/modules/3.5.0-17-generic/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko 11n_disable=1

  Read the article

• Ubuntu 12.04 + Wifi not working

  - by user171154

  i'm having problems connecting over wireless. At the moment, I'm using wicd. It seems to get stuck on "Verifying AP association...". Without wicd I can get the connection up and ping the Net - but if I take eth0 down (ifconfig eth0 down), my wireless goes away too (same result if I unplug the wire instead). wicd is the only way I can bring eth0 back (which is the main reason I'm using it) - ifconfig eth0 and/or ifup eth0 do not re-enable the connection (I just discovered it leaves out the gateway. Adding the gateway back in re-enables the connection including wifi; I didn't want to delete the info about wicd above in case it gives someone an idea.) Doing it manually, despite the errors (which it would be nice to also resolve) - allows me to ping the outside world: ifup wlan0 ioctl[SIOCSIWENCODEEXT]: Invalid argument ioctl[SIOCSIWENCODEEXT]: Invalid argument ssh stop/waiting ssh start/running, process 17336 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_req=1 ttl=43 time=48.8 ms 64 bytes from 8.8.8.8: icmp_req=2 ttl=43 time=47.9 ms 64 bytes from 8.8.8.8: icmp_req=3 ttl=43 time=48.7 ms 64 bytes from 8.8.8.8: icmp_req=4 ttl=43 time=53.2 ms --- 8.8.8.8 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 47.975/49.711/53.235/2.063 ms # iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:"TPLINK" Mode:Managed Frequency:2.427 GHz Access Point: 64:66:xx:xx:xx:22 Bit Rate=108 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off Link Quality=70/70 Signal level=-39 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:3 Missed beacon:0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: f0:7d:68:c1:b4:13 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-67-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:dfbf0000-dfbfffff ip route default via 192.168.0.1 dev eth0 default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 (For the record, I have no idea what the 169.254.0.0 address is doing there.) uname -a 3.2.0-67-generic-pae #101-Ubuntu SMP Tue Jul 15 18:04:54 UTC 2014 i686 i686 i386 GNU/Linux lshw -C network *-network description: Ethernet interface product: NetXtreme BCM5751 Gigabit Ethernet PCI Express vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 logical name: eth0 version: 01 serial: 00:11:11:59:fc:09 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm vpd msi pciexpress bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=tg3 driverversion=3.121 duplex=full firmware=5751-v3.23a ip=192.168.0.102 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:16 memory:dfcf0000-dfcfffff *-network description: Wireless interface product: AR5418 Wireless Network Adapter [AR5008E 802.11(a)bgn] (PCI-Express) vendor: Qualcomm Atheros physical id: 0 /etc/network/interfaces # interfaces(5) file used by ifup(8) and ifdown(8) auto lo iface lo inet loopback source /etc/network/interfaces.eth0 source /etc/network/interfaces.wlan0 /etc/network/interfaces.eth0 #Main Interface auto eth0 iface eth0 inet static address 192.168.0.102 netmask 255.255.255.0 gateway 192.168.0.1 /etc/network/interfaces.wlan0 auto wlan0 iface wlan0 inet static address 192.168.0.12 gateway 192.168.0.1 dns-nameservers 192.168.0.1 8.8.8.8 netmask 255.255.255.0 wpa-driver wext wpa-ssid TPLINK wpa-ap-scan 1 wpa-proto RSN wpa-pairwise CCMP wpa-group CCMP wpa-key-mgmt WPA-PSK wpa-psk dca1badb5fd4e9axxx4xxdaaxxfa91xx610bxx6a7d57ef67af9809dxx6af42e39 /etc/wpa_supplicant.conf ctrl_interface=/var/run/wpa_supplicant network={ ssid="TPLINK" psk="my password" key_mgmt=WPA-PSK proto=RSN pairwise=CCMP group=CCMP } ifdown eth0 ifdown: interface eth0 not configured ifconfig eth0 Link encap:Ethernet HWaddr 00:11:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:213690 errors:0 dropped:0 overruns:0 frame:0 TX packets:155266 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:220057808 (220.0 MB) TX bytes:21137696 (21.1 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196412 errors:0 dropped:0 overruns:0 frame:0 TX packets:196412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270697 (153.2 MB) TX bytes:153270697 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11335 errors:0 dropped:0 overruns:0 frame:0 TX packets:7287 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2563290 (2.5 MB) TX bytes:855746 (855.7 KB) ifconfig eth0 down ifconfig eth0 Link encap:Ethernet HWaddr 00:xx:xx:xx:xx:09 inet addr:192.168.0.102 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::211:11ff:fe59:fc09/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:2 errors:0 dropped:0 overruns:0 frame:0 TX packets:1 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:192 (192.0 B) TX bytes:94 (94.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:196418 errors:0 dropped:0 overruns:0 frame:0 TX packets:196418 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:153270871 (153.2 MB) TX bytes:153270871 (153.2 MB) wlan0 Link encap:Ethernet HWaddr f0:7d:xx:xx:xx:13 inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0 inet6 addr: fe80::f27d:68ff:fec1:b413/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:11359 errors:0 dropped:0 overruns:0 frame:0 TX packets:7293 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2565482 (2.5 MB) TX bytes:856363 (856.3 KB) ip route default via 192.168.0.1 dev wlan0 metric 100 169.254.0.0/16 dev wlan0 scope link metric 1000 192.168.0.0/24 dev wlan0 proto kernel scope link src 192.168.0.12 192.168.0.0/24 dev eth0 proto kernel scope link src 192.168.0.102 ping -I wlan0 -c 4 8.8.8.8 PING 8.8.8.8 (8.8.8.8) from 192.168.0.12 wlan0: 56(84) bytes of data. --- 8.8.8.8 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3024ms ping -I eth0 -c 3 router PING router (192.168.0.1) from 192.168.0.102 eth0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2015ms ping -I wlan0 -c 3 router PING router (192.168.0.1) from 192.168.0.12 wlan0: 56(84) bytes of data. --- router ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2014ms Let me know if you need more info. Thank you in advance.

  Read the article

• Super constructor must be a first statement in Java constructor [closed]

  - by Val

  I know the answer: "we need rules to prevent shooting into your own foot". Ok, I make millions of programming mistakes every day. To be prevented, we need one simple rule: prohibit all JLS and do not use Java. If we explain everything by "not shooting your foot", this is reasonable. But there is not much reason is such reason. When I programmed in Delphy, I always wanted the compiler to check me if I read uninitializable. I have discovered myself that is is stupid to read uncertain variable because it leads unpredictable result and is errorenous obviously. By just looking at the code I could see if there is an error. I wished if compiler could do this job. It is also a reliable signal of programming error if function does not return any value. But I never wanted it do enforce me the super constructor first. Why? You say that constructors just initialize fields. Super fields are derived; extra fields are introduced. From the goal point of view, it does not matter in which order you initialize the variables. I have studied parallel architectures and can say that all the fields can even be assigned in parallel... What? Do you want to use the unitialized fields? Stupid people always want to take away our freedoms and break the JLS rules the God gives to us! Please, policeman, take away that person! Where do I say so? I'm just saying only about initializing/assigning, not using the fields. Java compiler already defends me from the mistake of accessing notinitialized. Some cases sneak but this example shows how this stupid rule does not save us from the read-accessing incompletely initialized in construction: public class BadSuper { String field; public String toString() { return "field = " + field; } public BadSuper(String val) { field = val; // yea, superfirst does not protect from accessing // inconstructed subclass fields. Subclass constr // must be called before super()! System.err.println(this); } } public class BadPost extends BadSuper { Object o; public BadPost(Object o) { super("str"); this. o = o; } public String toString() { // superconstructor will boom here, because o is not initialized! return super.toString() + ", obj = " + o.toString(); } public static void main(String[] args) { new BadSuper("test 1"); new BadPost(new Object()); } } It shows that actually, subfields have to be inilialized before the supreclass! Meantime, java requirement "saves" us from writing specializing the class by specializing what the super constructor argument is, public class MyKryo extends Kryo { class MyClassResolver extends DefaultClassResolver { public Registration register(Registration registration) { System.out.println(MyKryo.this.getDepth()); return super.register(registration); } } MyKryo() { // cannot instantiate MyClassResolver in super super(new MyClassResolver(), new MapReferenceResolver()); } } Try to make it compilable. It is always pain. Especially, when you cannot assign the argument later. Initialization order is not important for initialization in general. I could understand that you should not use super methods before initializing super. But, the requirement for super to be the first statement is different. It only saves you from the code that does useful things simply. I do not see how this adds safety. Actually, safety is degraded because we need to use ugly workarounds. Doing post-initialization, outside the constructors also degrades safety (otherwise, why do we need constructors?) and defeats the java final safety reenforcer. To conclude Reading not initialized is a bug. Initialization order is not important from the computer science point of view. Doing initalization or computations in different order is not a bug. Reenforcing read-access to not initialized is good but compilers fail to detect all such bugs Making super the first does not solve the problem as it "Prevents" shooting into right things but not into the foot It requires to invent workarounds, where, because of complexity of analysis, it is easier to shoot into the foot doing post-initialization outside the constructors degrades safety (otherwise, why do we need constructors?) and that degrade safety by defeating final access modifier When there was java forum alive, java bigots attecked me for these thoughts. Particularly, they dislaked that fields can be initialized in parallel, saying that natural development ensures correctness. When I replied that you could use an advanced engineering to create a human right away, without "developing" any ape first, and it still be an ape, they stopped to listen me. Cos modern technology cannot afford it. Ok, Take something simpler. How do you produce a Renault? Should you construct an Automobile first? No, you start by producing a Renault and, once completed, you'll see that this is an automobile. So, the requirement to produce fields in "natural order" is unnatural. In case of alarmclock or armchair, which are still chair and clock, you may need first develop the base (clock and chair) and then add extra. So, I can have examples where superfields must be initialized first and, oppositely, when they need to be initialized later. The order does not exist in advance. So, the compiler cannot be aware of the proper order. Only programmer/constructor knows is. Compiler should not take more responsibility and enforce the wrong order onto programmer. Saying that I cannot initialize some fields because I did not ininialized the others is like "you cannot initialize the thing because it is not initialized". This is a kind of argument we have. So, to conclude once more, the feature that "protects" me from doing things in simple and right way in order to enforce something that does not add noticeably to the bug elimination at that is a strongly negative thing and it pisses me off, altogether with the all the arguments to support it I've seen so far. It is "a conceptual question about software development" Should there be the requirement to call super() first or not. I do not know. If you do or have an idea, you have place to answer. I think that I have provided enough arguments against this feature. Lets appreciate the ones who benefit form it. Let it just be something more than simple abstract and stupid "write your own language" or "protection" kind of argument. Why do we need it in the language that I am going to develop?

  Read the article

• Wireless networks are not detected at start up in Ubuntu 12.04

  - by Kanhaiya Mishra

  I have recently (three four days ago) installed Ubuntu 12.04 via windows installer i.e. wubi.exe. After the installation completed wireless and Ethernet were both working well. But after restart wireless networks didn't show up while in the network manager both networking and wireless were enabled. Though sometimes after boot it did show the networks available but very rarely. So I went through various posts regarding wireless issues in Ubuntu 12.04 and tried so many things but ended up in nothing satisfactory. I have Broadcom 4313 LAN network controller and brcmsmac driver. Then relying on some suggestions I tried to install bcm-wl driver but couldn't install due to some error in jockeyl.log file. Then i tried fresh installation of the same driver but still could resolve the startup issues with wireless. Then again I reinstalled Ubuntu inside windows using wubi installer. This time again same problem occurred after boot. But this time I successfully installed wl driver before disturbing file-system files of Ubuntu. But again the same issue. This time I noticed some new things: If I inserted Ethernet/LAN cable before startup then wireless networks are available and of course LAN(wired) networks also work. but if i don't plug in cable before startup and then plug it after startup then it didn't detect Ethernet network neither wireless. So I haven't noticed it before that LAN along with wifi also doesn't work after startup. But if i suspend the session and make it sleep and again login then it worked. I tried it every time that WLAN worked perfectly. But still i m unable to resolve that startup problem. Each time i boot first I have to suspend it once then only networks are available. It irritates me each time i reboot/boot my lappy. So please help out of this problem. Any ideas/help regarding this issue would be highly appreciated. Some of the commands that i run gave following results: # lspci 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06) 00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01) 04:00.0 Ethernet controller: Atheros Communications Inc. AR8152 v1.1 Fast Ethernet (rev c1) ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02) ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02) ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02) ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02) ff:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02) ff:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02) # sudo lshw -C network *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: eth1 version: 01 serial: 70:f1:a1:49:b6:ab width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 ip=192.168.1.7 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff *-network description: Ethernet interface product: AR8152 v1.1 Fast Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c1 serial: b8:ac:6f:6b:f7:4a capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI firmware=N/A latency=0 link=no multicast=yes port=twisted pair resources: irq:44 memory:f0400000-f043ffff ioport:2000(size=128) # lsmod | grep wl wl 2568210 0 lib80211 14381 2 lib80211_crypt_tkip,wl # sudo iwlist eth1 scanning eth1 Scan completed : Cell 01 - Address: 30:46:9A:85:DA:9A ESSID:"BH DASHIR 2" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:4/5 Signal level:-60 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B000103104700109AFE7D908F8E2D381860668BA2E8D8771021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 02 - Address: C0:3F:0E:EB:45:14 ESSID:"BH DASHIR 3" Mode:Managed Frequency:2.462 GHz (Channel 11) Quality:2/5 Signal level:-71 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD7F0050F204104A00011010440001021041000100103B00010310470010F3C9BBE499D140540F530E7EBEDE2F671021000D4E4554474541522C20496E632E10230009574752363134763130102400095747523631347631301042000538333235381054000800060050F204000110110009574752363134763130100800020084 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s; 6 Mb/s; 9 Mb/s 12 Mb/s; 48 Mb/s Cell 03 - Address: A0:21:B7:A8:2F:C0 ESSID:"BH DASHIR 4" Mode:Managed Frequency:2.422 GHz (Channel 3) Quality:1/5 Signal level:-86 dBm Noise level:-98 dBm IE: IEEE 802.11i/WPA2 Version 1 Group Cipher : CCMP Pairwise Ciphers (1) : CCMP Authentication Suites (1) : PSK IE: Unknown: DD8B0050F204104A0001101044000102103B0001031047001000000000000010000000A021B7A82FC01021000D4E6574676561722C20496E632E10230009574E523130303076321024000456324831104200046E6F6E651054000800060050F20400011011001B574E5231303030763228576972656C6573732041502D322E344729100800020086103C000103 Encryption key:on Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s; 36 Mb/s 48 Mb/s; 54 Mb/s

  Read the article

• C to C++ Conversion [closed]

  - by Annalyne

  Can someone convert this code to C++, pretty please? :( #include <stdio.h> #include <stdlib.h> #include <time.h> #define WEAPON_ROPE 10 #define WEAPON_REVOLVER 20 #define WEAPON_LEADPIPE 30 #define WEAPON_CANDLESTICK 40 #define WEAPON_KNIFE 50 #define WEAPON_WRENCH 60 #define PEOPLE_MRGREEN 100 #define PEOPLE_MSSCARLET 200 #define PEOPLE_CONLMUSTARD 300 #define PEOPLE_PROFPLUM 400 #define PEOPLE_MISPEACOCK 500 #define PEOPLE_MISWHITE 600 #define PLACE_KITCHEN 1 #define PLACE_HALL 2 #define PLACE_POOLROOM 3 #define PLACE_STUDY 4 #define PLACE_LOUNG 5 #define PLACE_LIBRARY 6 #define PLACE_CONSERVATORY 7 #define PLACE_DINING 8 #define PLACE_BILLIARDS 9 int main() { int die = 0; int players[6][9] = {{0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0, 0}}; int allCards[] = {WEAPON_ROPE, WEAPON_REVOLVER, WEAPON_LEADPIPE, WEAPON_CANDLESTICK, WEAPON_CANDLESTICK, WEAPON_KNIFE, WEAPON_WRENCH, PEOPLE_MRGREEN, PEOPLE_MSSCARLET, PEOPLE_CONLMUSTARD, PEOPLE_CONLMUSTARD, PEOPLE_PROFPLUM, PEOPLE_MISPEACOCK, PEOPLE_MISWHITE, PLACE_KITCHEN, PLACE_HALL, PLACE_POOLROOM, PLACE_STUDY, PLACE_LOUNG, PLACE_LIBRARY, PLACE_CONSERVATORY, PLACE_DINING, PLACE_BILLIARDS}; int deckSize = 23; // number of cards in allCards array int count; for (count = 0; count < deckSize; ++count) { printf(", %d", allCards[count]); } // End for // These three array's are so you can put a card back, if need be... int weaponCards[] = {WEAPON_ROPE, WEAPON_REVOLVER, WEAPON_LEADPIPE, WEAPON_CANDLESTICK, WEAPON_CANDLESTICK, WEAPON_KNIFE, WEAPON_WRENCH}; int weaponDeckSize = 7; int peopleCards[] = {PEOPLE_MRGREEN, PEOPLE_MSSCARLET, PEOPLE_CONLMUSTARD, PEOPLE_CONLMUSTARD, PEOPLE_PROFPLUM, PEOPLE_MISPEACOCK, PEOPLE_MISWHITE}; int peopleDeckSize = 7; int placeCards[] = {PLACE_KITCHEN, PLACE_HALL, PLACE_POOLROOM, PLACE_STUDY, PLACE_LOUNG, PLACE_LIBRARY, PLACE_CONSERVATORY, PLACE_DINING, PLACE_BILLIARDS}; int placeDeckSize = 9; srand(clock()); // seed rand() using clock() which gives // the current tick your processor is at... int killer[3]; // no need to initialize yet. killer[0-2] will initialize int deckShuffle = rand() % weaponDeckSize; // picks one number out of the deck killer[0] = weaponCards[deckShuffle]; allCards[deckShuffle] = 0; // Card drawn. No longer exists in deck deckShuffle = rand() % peopleDeckSize; // picks another random card out of the deck killer[1] = peopleCards[deckShuffle]; allCards[deckShuffle + weaponDeckSize] = 0; // Card drawn. No longer exists in deck deckShuffle = rand() % placeDeckSize; // randomly picks the last card needed killer[2] = placeCards[deckShuffle]; allCards[deckShuffle + weaponDeckSize + peopleDeckSize] = 0; // Card drawn. No longer exists in deck int numberOfCards = 0; printf("CLUE\n"); printf("written by John Schintone\n"); printf("Origonal game delvoped by Hasbro\n"); int numberOfPlayers = 0; while ((numberOfPlayers < 3) || (numberOfPlayers > 6)) { printf("How many players are Going to play :\n"); printf("[number] > "); scanf("%d",&numberOfPlayers); // A very fast if statement which only uses integers/char's switch(numberOfPlayers) { case 6: { numberOfCards = 3; } break; case 5: { numberOfCards = 4; } break; case 4: { numberOfCards = 5; } break; case 3: { numberOfCards = 6; } break; default: { printf("You must enter a number between 3 and 6...\n"); } // End default } // End switch } // End while int index1, index2; // Note: ++index1; is faster than index1++; and will almost always // produce better code (index1++ happens after this statement line. // ++index1 increments index1 before this statement line) for (index1 = 0; index1 < numberOfPlayers; ++index1) { printf("Player %d", index1); for (index2 = 0; index2 < numberOfCards; ++index2) { // Remember that allCards[deckShuffle] == 0 because we removed that // card ages ago... works out well, just don't forget you did that : ) while (allCards[deckShuffle] == 0) { deckShuffle = rand() % deckSize; } // End while players[index1][index2] = allCards[deckShuffle]; allCards[deckShuffle] = 0; // Card removed for after loop... printf(", %d", players[index1][index2]); switch(players[index1][index2]) { case WEAPON_ROPE: { } break; // Add more... case PEOPLE_MRGREEN: { } break; // Add more... case PLACE_KITCHEN: { } break; // Add more... default: { printf("Program has caught player %d cheating...", index1); } // End default } // End switch } // End for printf("\n"); } // End for printf("The killer is %d, with the %d, and in the %d \n\n", killer[0], killer[1], killer[2]); printf("Type h for this help... \n"); printf("Type e to escape... \n"); printf("Type r to roll the die... \n"); char command = '\0'; // \0 represents zero, or the null character while (command != 'e') { printf("[one character] > "); scanf("%c", &command); if (command == 'r') { die = rand() % 6 + 1; printf("Your number is: %d \n", die); } // end while if (command == 'h') { printf("Type h for this help... \n"); printf("Type e to escape... \n"); printf("Type r to roll the die... \n"); } // End if printf("\n"); } // End while return(0); // Success. Program worked ok } // End main() Function

  Read the article

• 11gR2 ???:Oracle Cluster Health Monitor(CHM)??

  - by JaneZhang(???)

     Cluster Health Monitor(????CHM)???Oracle?????,?????????????(CPU????SWAP????I/O?????)??????CHM??????????   ??????????????????????Hang?????(Eviction)????????????????,??????CHM????????????????????,????????????? CHM???????????:    11.2.0.2 ?????? Oracle Grid Infrastructure for Linux (???Linux Itanium) ?Solaris (Sparc 64 ? x86-64)    11.2.0.3 ????? Oracle Grid Infrastructure for AIX ? Windows (???Windows Itanium)?    ????,???????????CHM?????(ora.crf)???:    $ crsctl stat res -t -init    --------------------------------------------------------------------------------    NAME           TARGET  STATE        SERVER                   STATE_DETAILS       Cluster Resources ora.crf        ONLINE  ONLINE       rac1 CHM????????:    1). System Monitor Service(osysmond):?????????????,osysmond????????????????cluster logger service,???????????????????CHM?????      $ ps -ef|grep osysmond       root      7984     1  0 Jun05 ?        01:16:14 /u01/app/11.2.0/grid/bin/osysmond.bin    2). Cluster Logger Service(ologgerd):???????,ologgerd ???????(master),???????(standby)??ologgerd???????????????,??????????     ???:     $ ps -ef|grep ologgerd       root      8257     1  0 Jun05 ?        00:38:26 /u01/app/11.2.0/grid/bin/ologgerd -M -d       /u01/app/11.2.0/grid/crf/db/rac2     ???:      $ ps -ef|grep ologgerd       root      8353     1  0 Jun05 ?        00:18:47 /u01/app/11.2.0/grid/bin/ologgerd -m rac2 -r -d /u01/app/11.2.0/grid/crf/db/rac1 CHM Repository:?????????,?????,????Grid Infrastructure home ? ,??1 GB ?????,???????????0.5GB???? ?????OCLUMON??????????????????(??????3????)? ??????????????:     $ oclumon manage -get reppath       CHM Repository Path = /u01/app/11.2.0/grid/crf/db/rac2       Done     $ oclumon manage -get repsize       CHM Repository Size = 68082 <====????       Done     ????:     $ oclumon manage -repos reploc /shared/oracle/chm      ????:     $ oclumon manage -repos resize 68083 <==?3600(??) ? 259200(3?)??      rac1 --> retention check successful      New retention is 68083 and will use 1073750609 bytes of disk space      CRS-9115-Cluster Health Monitor repository size change completed on all nodes.      Done ??CHM???????????:     1. ?????Grid_home/bin/diagcollection.pl:         1). ??,??cluster logger service????:         $ oclumon manage -get master         Master = rac2         2).?root??????rac2???????:         # <Grid_home>/bin/diagcollection.pl -collect -chmos -incidenttime inc_time -incidentduration duration         inc_time?????????????,???MM/DD/YYYY24HH:MM:SS, duration??????????????????         ??:# diagcollection.pl -collect -crshome /u01/app/11.2.0/grid -chmoshome  /u01/app/11.2.0/grid -chmos -incidenttime 06/15/201215:30:00 -incidentduration 00:05       3).????????,CHM?????????chmosData_rac2_20120615_1537.tar.gz?    2. ??????CHM?????????oclumon:        $oclumon dumpnodeview [[-allnodes] | [-n node1 node2] [-last "duration"] | [-s "time_stamp" -e "time_stamp"] [-v] [-warning]] [-h]        -s??????,-e??????        $ oclumon dumpnodeview -allnodes -v -s "2012-06-15 07:40:00" -e "2012-06-15 07:57:00" > /tmp/chm1.txt       $ oclumon dumpnodeview -n node1 node2 node3 -last "12:00:00" >/tmp/chm1.txt       $ oclumon dumpnodeview -allnodes -last "00:15:00" >/tmp/chm1.txt ???/tmp/chm1.txt??????:----------------------------------------Node: rac1 Clock: '06-15-12 07.40.01' SerialNo:168880----------------------------------------SYSTEM:#cpus: 1 cpu: 17.96 cpuq: 5 physmemfree: 32240 physmemtotal: 2065856 mcache: 1064024 swapfree: 3988376 swaptotal: 4192956 ior: 57 iow: 59 ios: 10 swpin: 0 swpout: 0 pgin: 57 pgout: 59 netr: 65.767 netw: 34.871 procs: 183 rtprocs: 10 #fds: 4902 #sysfdlimit: 6815744 #disks: 4 #nics: 3  nicErrors: 0TOP CONSUMERS:topcpu: 'mrtg(32385) 64.70' topprivmem: 'ologgerd(8353) 84068' topshm: 'oracle(8760) 329452' topfd: 'ohasd.bin(6627) 720' topthread: 'crsd.bin(8235) 44'PROCESSES:name: 'mrtg' pid: 32385 #procfdlimit: 65536 cpuusage: 64.70 privmem: 1160 shm: 1584 #fd: 5 #threads: 1 priority: 20 nice: 0name: 'oracle' pid: 32381 #procfdlimit: 65536 cpuusage: 0.29 privmem: 1456 shm: 12444 #fd: 32 #threads: 1 priority: 15 nice: 0...name: 'oracle' pid: 8756 #procfdlimit: 65536 cpuusage: 0.0 privmem: 2892 shm: 24356 #fd: 47 #threads: 1 priority: 16 nice: 0----------------------------------------Node: rac2 Clock: '06-15-12 07.40.02' SerialNo:168878----------------------------------------SYSTEM:#cpus: 1 cpu: 40.72 cpuq: 8 physmemfree: 34072 physmemtotal: 2065856 mcache: 1005636 swapfree: 3991808 swaptotal: 4192956 ior: 54 iow: 104 ios: 11 swpin: 0 swpout: 0 pgin: 54 pgout: 104 netr: 77.817 netw: 33.008 procs: 178 rtprocs: 10 #fds: 4948 #sysfdlimit: 6815744 #disks: 4 #nics: 4  nicErrors: 0TOP CONSUMERS:topcpu: 'orarootagent.bi(8490) 1.59' topprivmem: 'ologgerd(8257) 83108' topshm: 'oracle(8873) 324868' topfd: 'ohasd.bin(6744) 720' topthread: 'crsd.bin(8362) 47'PROCESSES:name: 'oracle' pid: 9040 #procfdlimit: 65536 cpuusage: 0.19 privmem: 6040 shm: 121712 #fd: 33 #threads: 1 priority: 16 nice: 0...  ??CHM?????,???Oracle????:  http://docs.oracle.com/cd/E11882_01/rac.112/e16794/troubleshoot.htm#CWADD92242  Oracle® Clusterware Administration and Deployment Guide  11g Release 2 (11.2)  Part Number E16794-17  ?? My Oracle Support??:  Cluster Health Monitor (CHM) FAQ (Doc ID 1328466.1)

  Read the article

• Timer_ConnectionIdle in HttpErr

  - by homestar

  I have a web service application with some reliability issues I am trying to diagnose. One thing that I noticed is that there are a number of entries in the HTTPERR log that indicate "Timer_ConnectionIdle". I have read a few places that these are innocent and occur when the client leaves a connection open and then doesn't get around to reusing it before the server times out. I'm wondering however if it could also be happening if my server-side application is taking too long to respond to requests. I guess my question is whether a Timer_ConnectionIdle event is triggered if the server application doesn't start writing a response to the client within the 2-minute default timeout window or if the "clock" is only ticking when the application is not working on servicing the request.

  Read the article

• xfx 680i motherboard failure?

  - by Ian

  At some point last night we must have had a blip in our power, as the stove clock was blinking like it would had their been... a blip in the power. When I came into my office this morning, my desktop computer was powered down and would not turn on. Cracking the case, I can see a small blue blinking light on the front right corner of the motherboard. Unplugging the power from the PSU causes the blinking to stop. Plugging in the power causes the blinking to resume. Pressing the power button does nothing. Does anyone know what this blinking blue light means? I'm mostly curious now if it's the motherboard that has gone bad, or the power supply. I don't have any other desktop parts to use to troubleshoot these components. Any ideas? My motherboard is an XFX NFORCE 680I SLI INTEL SOCKET 775 DDR2 ( Model #: MB-N680-ISH9 )

  Read the article

• My linux server time and log files are not the same

  - by Martin

  Hi i have installed NTP on my linux server and i am getting my clock from a 6500 core switch, everything is working fine. When i ssh to a switch i have it all sent to a log file on the linux server, this log file does not time stamp with the same time as i have on the server. the date and hwclock are the same. But my my is exatly 6 hours behind my date on the server wich is CET. Has annyone have that same problem ? bedst regards Martin

  Read the article

• Load Average runaway

  - by mewrei

  Is there any way to chase down lockups and runaway load averages? Every so often (pretty randomly) I'll get my load average spike up over 5 usually to around 10-15 and sometimes as high as 75 (dual core machine), and cause my system to lock for an indeterminate amount of time. The only thing I can possibly chase it to is using nVidia fakeraid (RAID-1) with JFS on top of that for my /home partition. Also I noticed that when my load averages spike, the power management system doesn't step up my processor speed from 1.6 to its maximum 2.13Ghz clock speed (not sure if this makes a huge difference with this problem). Any ideas?

  Read the article

• core temperature vs CPU temperature

  - by Karl Nicoll

  I have recently installed a new heat sink & fan combination on my Core 2 Quad since my CPU was hitting about 70C under load. This has managed reduce temperatures while running Prime95 to about 54C, which I'm taking as a win (this is ~30 minutes after fitting). I'm a little confused though. The temperature readings given above are for CORE temperatures, but HWMonitor is showing a 5th "CPU" temperature (4 temperatures being the individual core temps) which is showing 21C idle, when idle temperatures for the cores vary between 37C and 42C. I guess there are two questions here: Are my CPU/Core temperatures decent, and is it safe to overclock when these are stock clock temperatures? I gather that the maximum safe operating temperature for a C2Q is ~70C, so which temperature should I measure against, the core temperatures (which are higher), or the CPU temperature reading?

  Read the article

• ASP.NET Web Server Hardware Configuration

  - by Santa Te Banta

  I'm planning on deploying my ASP.NET Web app in the production environment using a Windows Server 2003 machine. But I know nothing about the CPU brand names and what's best. I know 4 GB RAM, with anything over 3 GHz clock speed will be a good bet and will serve a large number of users. But tell me what's the latest and greatest processor brand-names for running a Windows Server 2003 OS today? And what edition of the Windows 2003 Server do I need out of the following, if I have to run a website to support about 100,000 (a hundred thousand) users, 60% of who are expected to be online at all times? Web Edition Standard Enterprise Datacenter source: http://en.wikipedia.org/wiki/Windows_Server_2003 The article says that the Web edition can only support up to 2 GB of RAM. Will that be sufficient for the above user population?

  Read the article

• Windows wait command till a system time

  - by user53864

  I have made a batch script for backup recently. Somewhere in the middle of script I'll have to wait for some time to be reached and then resume the next line of the script. I've scheduled the script at 4:00PM and after the wait command the next line should start at exactly 5:30PM. I thought of using SLEEP command but it's not sure that the commands used before the wait command will end up at certain time(due to inconsistent file sizes) but it's sure that they will be done by 5:00 or 5:10 and next it should execute wait command which waits for certain system clock. I'm checking if there is any command that waits or sleeps until the time specified reaches the system time and resumes there after. Anybody came across this situation and how was that resolved?

  Read the article

• which factors determines the speed of a processor? [closed]

  - by Deb

  I think that clock rate of processor determines the speed of core, in my case it is 1.86GHz. But If I am not wrong, it also determines that how much energy it will consume. If you have more frequency then more power it will consume. I choose Power Saver scheme to increase my battery life, however it reduces my core speed to half of the actual speed. I understand this happens because of SpeedStep, but I don't see any slowdown of my computer. So my problem is why we have such high frequency cores as it uses too much power. We can use low frequency cores. Actually I get confused between the two terms Speed of the processor and its frequency. So how much important is the frequency of core in case of any processor.

  Read the article

• Windows Updates - Does Not Install, how can I remove it

  - by Kanini

  Everytime I shutdown my Windows XP, it comes up with the following screen which says "Turn Off with Installing Updates" (Of course, it also gives me an option as follows, "Click here to turn off without installing updates.") Now, when I do normal shutdown asking it to Install Updates and Turn it Off. It does not install the updates and every subsequent time I try to shut down the PC, it still comes with the prompt "Turn Off with Installing Updates". I managed to find out that this install was this "Installing Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) update 1 of 1 .... " Now, when I click on the Installing Updates icon (the yellow icon, that appears on the task bar near the clock), and Install it. It tries to install and it fails. Now, why is this install alone failing? Second, if we are not able to ascertain why this is failing, can we at least ensure that it is removed from the list of possible installs so that everytime it does not ask me to install it.

  Read the article

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• How can I check detailed memory information on linux?

  - by user35153

  I know that I can check cpu info via cat /proc/cpuinfo and memory info via cat /proc/meminfo. but cat /proc/meminfo yiels result like : MemTotal: 66098352 kB MemFree: 329152 kB Buffers: 632432 kB Cached: 62619692 kB SwapCached: 0 kB Active: 6425444 kB Inactive: 58717276 kB SwapTotal: 1951888 kB SwapFree: 1951796 kB Dirty: 38416 kB Writeback: 0 kB AnonPages: 1890268 kB Mapped: 12624 kB Slab: 464580 kB SReclaimable: 275812 kB SUnreclaim: 188768 kB PageTables: 7524 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 35001064 kB Committed_AS: 3860248 kB VmallocTotal: 34359738367 kB VmallocUsed: 125636 kB VmallocChunk: 34359612527 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB But I want to learn info on the clock speed of the memories (in Mhz?) HOW can I get That Info ? Thnks

  Read the article

• Delayed startup of network icon (wi-fi)

  - by Michael Dy

  When my Windows 7 Starter netbook boots up and after everything is loaded, it takes about five minutes before the network icon near the clock becomes functional. When there's an available wi-fi signal (which automatically connects to my netbook as preconfigured) after the boot, my netbook seamlessly connects to it even if the network icon cannot be clicked or accessed. (The icon is shown to be loading for about five minutes.) During this time, when I go to Network and Sharing Center, it takes the same time to load. So even while the icon and the Center cannot be accessed, I can surf the Internet. When my netbook was still new, it didn't have this issue. How do I fix this?

  Read the article

• Windows 7 remote desktop connection does not respond to mouse or keyboard

  - by Daniel Jette

  Pretty much every time I connect to my work PC from home (both running Windows 7), I can see the screen refresh and signs of life (clock changes, notifications pop up), but I cannot interact with the remote machine at all. Mouse and keyboard input are both ignored. If I repeatedly reconnect, I will eventually get a connection that works. I think either a setting on my host machine, VPN client or work network is configured wrong. My home PC is running Windows 7 Professional. My work PC is running Windows 7 Enterprise. My VPN client is Cisco AnyConnect. Is this a problem anyone else has run in to? Any suggestions for settings to tweak?

  Read the article

• Checking detailed memory information on Linux

  - by user35153

  I know that I can check CPU info via cat /proc/cpuinfo and memory info via cat /proc/meminfo. But cat /proc/meminfo yields results like the following: MemTotal: 66098352 kB MemFree: 329152 kB Buffers: 632432 kB Cached: 62619692 kB SwapCached: 0 kB Active: 6425444 kB Inactive: 58717276 kB SwapTotal: 1951888 kB SwapFree: 1951796 kB Dirty: 38416 kB Writeback: 0 kB AnonPages: 1890268 kB Mapped: 12624 kB Slab: 464580 kB SReclaimable: 275812 kB SUnreclaim: 188768 kB PageTables: 7524 kB NFS_Unstable: 0 kB Bounce: 0 kB CommitLimit: 35001064 kB Committed_AS: 3860248 kB VmallocTotal: 34359738367 kB VmallocUsed: 125636 kB VmallocChunk: 34359612527 kB HugePages_Total: 0 HugePages_Free: 0 HugePages_Rsvd: 0 HugePages_Surp: 0 Hugepagesize: 2048 kB I want to learn more about the clock speed of the memory (in Mhz?). How do I get that information?

  Read the article

• What influences the kind of RAM a desktop or laptop can support?

  - by Albert Iordache

  What exactly influences the kind of RAM a desktop or laptop can support? Apart from the clock speed, the maximum amount of RAM the motherboard can handle, the DDR type (1/2/3) and the shape of the module (DIMM for desktops, SO-DIMM for laptops)? I see that in certain cases, such as with the Kingston 4GB DDR3 1333MHz CL9, (and on the Kingston KTD-L3B/4G page) the page displays a set of laptop product numbers. Does the actual model of the laptop also influence the models of RAM it can support? Could, for instance, an Asus K52 work with that particular RAM module, even if it specifies Dell models?

  Read the article

• Taskbar disappears sometimes when using a second monitor

  - by Alcenaia

  Windows 7 laptop, docked with a second monitor. This problem started happening when I started using the second monitor. The taskbar will often stop displaying. The Windows logo remains, but the bar, system tray, clock, and any icons for minimized programs disappear. I can see part of my desktop wallpaper where the taskbar should be. The taskbar is not set to auto-hide. Killing the explorer.exe process and starting it again temporarily fixes this. Is there a permanent solution? Thanks!

  Read the article

• Setup NTPD in Ubuntu to sync Windows AD

  - by David

  I am setting up my Ubuntu 10.0.4 server to sync clock with a Windows 2008 AD. As none of the "remote" has a "*" in front (worst it had a blank space in front), does it mean no time sync source is selected? The offset just keep increasing. I tried ntpdate to the same server it worked OK. remote refid st t when poll reach delay offset jitter ============================================================================== 172.18.133.201 .LOCL. 1 u 38 64 377 0.827 277.677 58.375 Any help to fix this? Here is my ntp.conf (with all comments removed) driftfile /var/lib/ntp/ntp.drift statistics loopstats peerstats clockstats filegen loopstats file loopstats type day enable filegen peerstats file peerstats type day enable filegen clockstats file clockstats type day enable restrict -4 default kod notrap nomodify nopeer noquery restrict -6 default kod notrap nomodify nopeer noquery restrict 127.0.0.1 restrict ::1 server 172.18.133.201 iburst

  Read the article

• Windows 7 Change internet time settings tells me I have no permissions.

  - by Matthias Vance

  LS, While trying to solve my computer clock always running ahead (even when on, not just on every boot), I apparently broke some security settings. All I did (as far as I can remember) was stop and start the w32time service. Now, whenever I go to the "Internet time" tab, and click "Change settings..." Windows tells me I don't have permissions to do so. Facts I am a member of the Administrators group. In gpedit.msc, I checked that the Administrators group is allowed to change the system time. Kind regards, Matthias Vance

  Read the article

• I can't run uwsgi as normal user

  - by atomAltera

  I want to run uwsgi server as www user, but if I write: uwsgi --socket $SOCKET --chmod-socket 666 --pidfile $PIDFILE --daemonize $LOGFILE --chdir $CHDIR --pp $PYTHONPATH --module main --post-buffering 8192 --workers 1 --threads 10 --uid www --gid www A socket creation error occurs: Log: 1 *** Starting uWSGI 1.4.1 (64bit) on [Mon Dec 10 22:15:23 2012] *** 2 compiled with version: 4.4.5 on 17 November 2012 23:31:14 3 os: Linux-2.6.32-5-amd64 #1 SMP Sun Sep 23 10:07:46 UTC 2012 4 nodename: autoblog 5 machine: x86_64 6 clock source: unix 7 pcre jit disabled 8 detected number of CPU cores: 2 9 current working directory: / 10 writing pidfile to /tmp/uwsgi_mysite.pid 11 detected binary path: /usr/local/bin/uwsgi 12 setgid() to 1002 13 set additional group 1004 (files) 14 setuid() to 1002 15 *** WARNING: you are running uWSGI without its master process manager *** 16 your memory page size is 4096 bytes 17 detected max file descriptor number: 1024 18 lock engine: pthread robust mutexes 19 unlink(): Operation not permitted [core/socket.c line 109] 20 bind(): Address already in use [core/socket.c line 141]

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >