Search Results

Search found 9861 results on 395 pages for 'video conferencing'.

Page 28/395 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• SLI Video Cards

  - by Scott

  I'm configuring a new desktop. I'm looking through all PCI Express 2.0 x16 video cards on NewEgg at the moment. All cards seem to be stating that they have SLI Support or CrossFireX support. I know that these 2 technologies enable you to connect more than one video card together to create more of a powerful video experience. These cards that have this support seem to be more expensive that other cards though. When I did a NewEgg search for cards that did NOT have these two supports, no matches came up for PCI Express 2.0 x16 (haven't checked other interfaces yet though). Can you run an SLI/CrossFireX card as a single card (and if you can is it efficient or even good?), or do you need to have more than one card to run them? Also, do they make cards without these two technologies anymore, and are they even cheaper at this point? I really have no need for SLI/CrossFireX at all, so I was wondering what I should look into. Do cards without this technology not run on the PCI Express 2.0 x16 interface? Thanks ahead of time for all your help.

  Read the article

• SLI Video Cards

  - by Scott

  I'm configuring a new desktop. I'm looking through all PCI Express 2.0 x16 video cards on NewEgg at the moment. All cards seem to be stating that they have SLI Support or CrossFireX support. I know that these 2 technologies enable you to connect more than one video card together to create more of a powerful video experience. These cards that have this support seem to be more expensive that other cards though. When I did a NewEgg search for cards that did NOT have these two supports, no matches came up for PCI Express 2.0 x16 (haven't checked other interfaces yet though). Can you run an SLI/CrossFireX card as a single card (and if you can is it efficient or even good?), or do you need to have more than one card to run them? Also, do they make cards without these two technologies anymore, and are they even cheaper at this point? I really have no need for SLI/CrossFireX at all, so I was wondering what I should look into. Do cards without this technology not run on the PCI Express 2.0 x16 interface? Thanks ahead of time for all your help.

  Read the article

• Best video codec to store my own collection

  - by Jack

  Hello! I think this question has already been asked but with different flavours. My problem resised in the fact that my camera (Canon G9) creates video with almost raw codec (I think it's plain old MPEG) so a 10 minutes video is almost 900mb. I would like to convert them in a format that has a good trade-off between space and quality, but I would prefer having the quality as good as the original (of course this is not possible because of lossy compression) just saving as much space is possible with a minimal lose of quality. Which codec should I look for? H264? It seems to be the champion of the moment.. otherwise which other ones could I try? XviD? Which parameters should I use? I mean how many kbits/s is a fair good bitrate to keep high quality? And what about audio codec? video specs are 640x480 at 30fps or 1024x768 at 15fps.. thanks in advance!

  Read the article

• Regular expression to match one of two video ID's in a Google Video URL

  - by Baldur

  I need to grab the video ID from a Google Video URL. There are two different types of URLs that I need to be able to match: http://video.google.com/videoplay?docid=-3498228245415745977# where I need to be able to match -3498228245415745977 (note the dash; -), and video.google.com/videoplay?docid=-3498228245415745977#docid=2728972720932273543 where I need to match 2728972720932273543. Is there any good regular expression that can match this? This is what I've got so far: @"docid=(-?\d{19}+)" since the video ID seems to be 19 characters except when it's prefixed with the dash. I'm using C# (of which I have very little experience) if that changes anything. P.s. I would also appreciate you review my regular expressions for YouTube (@"[\?&]v=([^&#])";), RedTube (@"/(\d{1,6})") and Vimeo (@"/(\d*)"). I do not expect users to enter the full URL and thus do not match the ^http://\\.?sitename+\\.\\w{2,3}.

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• Linux virtualization choices with graphic acceleration / video card support

  - by Urbn

  I am in the process of building a new desktop machine for work and fun. I am looking to run a undecided flavor of Linux (guessing Ubuntu) as my primary OS and several Windows installs with a Windows 7 install for .net development and gaming as virtualized environments. From my previous experiences with virtualization software in Linux I was never able to find an application that offered descent video card support / graphic acceleration etc. to be capable of playing any games within one of the virtualized environments. And since I will be investing quite a bit of money into this system for gaming I would naturally want to find the best option available to achieve this setup. So Onto my question: Is there any virtualization software available for Linux that has full video card support, graphic acceleration and capable of taking advantage of everything the video cards have to offer within the virtualized environments? Or am I stuck with running Windows 7 as my primary OS and using virtualization for Linux and the other OS's? Also I have no preference on open/closed source and price range would be up to $175.00 to support at least 3 virtualized environments.

  Read the article

• How to create video file from DVD

  - by pkaeding

  I want to take the DVD video slideshow that I got from my wedding photographer, and put the video on youtube (I have permission, I made sure to get the non-exclusive rights to use anything she created while working for me in any way I wanted when we working out the terms before-hand). Can anyone suggest the best way to get a video file that can be uploaded to YouTube from this DVD? The source DVD is not encrypted, so I don't need to worry about that. I am using a Mac, so Mac-friendly suggestions are preferred. Thanks! EDIT: So, I tried Handbrake, and it looks very promising. However, When I select the title in Handbrake, it says it is about 12 minutes long. The resulting file ends up only being about 4 minutes long, and the music is messed up. It seems to be going normally through the photo transitions, but removing the time that the slideshow stays on each photo. I believe the DVD was created using iDVD. Does it do anything weird to save space by varying hte framerate, or anything like that? Are there special settings in Handbrake I need to use?

  Read the article

• Android playing Video data from a custom network stream?

  - by Cinar

  Does Android MediaPlayer can only work with file sources? I would like play media (video) from a network stream, but the stream comes in a non-standard protocol, so I have to somehow feed Android MediaPlayer with the data only. Is there anyway to do that? I found a few web pages suggesting using a temporary file for the buffered media data etc. but I would like to minimize the I/O usage as much as I can, so I'm looking for a API only solution if there is any? how about JNI? but looks like the permissions going to be an issue with that also.

  Read the article

• Software/hardware to build video streaming server?

  - by Sasha Yanovets

  I am looking for a video streaming server solution, something like online TV server, with ability to make live broadcasts in the internet. What software could you recommend for that? What kind of hardware it should run on, should be there anything special? I am looking for a solution that could be scaled up to at least 1000 simultaneous users online with good resolution of video. I think it is good to have general answer on what direction to choose. But here more details on my specific case: I just looking for a solution almost from scratch. We have some video content that we've produced, but it is not delivered over internet yet. We do not tied to any particular vendor for now. We want to make 24 hours of steaming three 8 hour blocks with change of content every day. We want the ability to make regular live broadcasts. I guess we will need to have several options of streaming quality (low ~56 kb/s mid ~273 kb/s). Some terms just foreign to me (like play-truncation rate), if you could point out what parameters we should avare of, it would be great. Uplink to the internet is to be determined. We plan to start from something and scale up on the way. If you are already have some kind of media streaming server, just describe its configuration here (hardware, OS, software), peak number of concurrent users it serves. I think it could help people approaching this task.

  Read the article

• reaching constant video bitrate by using ffmpeg

  - by sebastian

  We use ffmpeg and a transcoding script for transcoding and want to make some batch files which we can use for transcoding. For example I use a parameter called video_kbit and if I am writing in 30000 it should reach 30 Mbit. Of course if I use 6000 as parameter it should reach 6 MBit as well, so I have one script which reaches every video bitrate I want. As my settings are now, I only reach 18.1 Mbit. Only when I use 15000 as a parameter I am reaching my goal for a constant video bitrate of 15 MBit. If I use 8000 as parameter I get 10.1 MBit as a result. So under 15000, I get a higher bitrate and over 15000, I get a lower bitrate than I want. My presettings are: ffmpeg -threads "4" -i "$2" -f mp4 -c:v libx264 -crf 1 \ -bufsize 30000k -maxrate ${FC_PARAM_video_kbit}k \ -acodec libfaac -ac 2 -ab ${FC_PARAM_audio_kbit}k -ar 44100 \ -pix_fmt yuv420p -vf scale=${FC_PARAM_width}:${FC_PARAM_height} -y "$3" And I am using these parameters: FC_PARAM_video_kbit = 30000 FC_PARAM_audio_kbit = 192 FC_PARAM_width = 1920 FC_PARAM_height = 1080 I have tried using a higher bufsize and using profile:v and level settings, but nothing got me near the constant video bitrate of 30000 Mbit. Do you guys have any ideas or suggestions for a better way to reach my goal?

  Read the article

• How to capture footage from an analog TV?

  - by hope

  I have only an old analog TV with just RCA connectors and a coaxial/cable in/out wire. It uses no HDMI interface, etc. I would like to know the cheapest method possible where the current video footage can be transferred and made into a target digital video file format and be copyable/transferrable via USB. Are there any devices that can do this with an analog TV? Basically, how can I get something along these lines done and for cheap?P I do NOT want to stream; I want footage recorded off the TV and stored via a digital encoding of a video file.

  Read the article

• How do I merge MP4 files without audio going out of sync?

  - by djangofan

  Is there a tool I can use that can merge MP4 files without throwing the audio out of sync? I generated some MP4 files from a DVD using AVIDemux but whatever tool I try to use always ends up throwing the audio out of sync with the video. The further you get into the video the further off-sync the audio is. By themselves the MP4/AAC videos have perfect audio-video sync. later tonight i might try http://www.headbands.com/gspot/ to examine the file before and after to see if anything changed in the media format.

  Read the article

• Cutting up videos (excerpting) on Mac OS X -- iMovie produces super-large files

  - by markvgti

  I need to cut out parts of a video (+ the associated audio, of course) to make a short clip. For example, take 2 minutes from one location, 3 minutes from another part of the video, 30 seconds from another location and join it all together to form one single clip. The format of the input video is mp4 (H.264 encoding, AFAICR). Don't need very sophisticated merges or transitions from one part to the next, or sophisticated banners (text) on-screen, but some ability to do so would be a plus point. I've done this with iMovie in the past, but where the original file was under 5MB/min of play time, the chopped-up version was over 11MB/min of play time, which to me seems really bad. Is there a better/different way of doing this on OS X? Looking for free (gratis) solutions. OS: OS X 10.9.3

  Read the article

• Resizing video best practices (frame size)

  - by undefined

  I have read the following which is from Best Practices for Encoding Video with the VP6 Codec on the Adobe website here - http://www.adobe.com/devnet/flash/articles/encoding_video_print.html. It is talking about common video ratios (320x240, 640x480) Although these ratios are standard, and should be used to avoid distorting the video, the size of the encoded video is not set in stone. The original web video sizes used heights and widths that were evenly divisible by 16. This was mandatory for many early codecs. Although this is not necessary for modern codecs, you should stick to even heights and widths. What do they mean by 'even heights and widths'. I am thinking about encoding my video at 400x300 to make it slightly bigger, this is still 4x3 format but should I just stick at 320x240 and resize it on the screen? Clearly there are benefits to this in terms of storage size and delivery costs. In some places on my site I want to show the video at 400x300 but in others I want it to play full screen so this is why I am wondering if a larger original size (400x300) will give better results when blown up. Any thoughts?

  Read the article

• DirectShow Filter I wrote dies after 10-24 seconds in Skype video call

  - by Robert Oschler

  I've written a DirectShow push filter for use with Skype using Delphi Pro 6 and the DSPACK DirectShow library. In preview mode, when you test a video input device in the Skype client Video Settings window, my filter works flawlessly. I can leave it up and running for many minutes without an error. However when I start a video call after 10 to 24 seconds, never longer, the video feed freezes. The call continues fine with the call duration counter clicking away the seconds, but the video feed is dead, stuck on whatever frame the freeze happened (although after a long while it turns black which I believe means Skype has given up on the filter). I tried attaching to the process from my debugger with a breakpoint literally set on every method call and none of them are hit once the freeze takes place. It's as if the thread that makes the DirectShow FillBuffer() call to my filter on behalf of Skype is dead or has been shutdown. I can't trace my filter in the debugger because during a Skype call I get weird int 1 and int 3 debugger hard interrupt calls when a Skype video call is in progress. This behavior happens even with my standard web cam input device selected and my DirectShow filter completely unregistered as a ActiveX server. I suspect it might be some "anti-debugging" code since it doesn't happen in video input preview mode. Either way, that is why I had to attach to the process after the fact to see if my FillBuffer() called was still being called and instead discovered that appears to be dead. Note, my plain vanilla USB web cam's DirectShow filter does not exhibit the freezing behavior and works fine for many minutes. There's something about my filter that Skype doesn't like. I've tried Sleep() statements of varying intervals, no Sleep statements, doing virtually nothing in the FillBuffer() call. Nothing helps. If anyone has any ideas on what might be the culprit here, I'd like to know. Thanks, Robert

  Read the article

• HTML5 Video Element on iPad doesn't fire onclick?

  - by bhups

  I am using the video element in my HTML as following:<div id="container" style="background:black; overflow:hidden;width:320px;height:240px" <video style="background:black;display:block" id="vdo" height="240px" width="320px" src="http://mydomain/vid.mp4"</video</div And in javascript I am doing this:var video=document.getElementById('vdo'); var container=document.getElementById('container'); video.addEventListener('click', function(e) { e.preventDefault(); console.log("clicked"); }, false); container.addEventListener('click', function(e) { e.preventDefault(); console.log("clicked"); }, false); On desktop safari/chrome everything is working fine. I can see two "clicked" in the console. But on ipad there is nothing. First I tried with iOS versin 3.2, then I updated it to the latest one 4.2.1 without any success.I found a similar question HTML5 Video Element on iPad doesn't fire onclick or touchstart events? where it suggests not to use controls in video tag and I am not using it.

  Read the article

• What is the best video editor on Ubuntu for editing multi-format/multi-eco?

  - by amjad

  I have many video clips with different formats and I want to create a short movies by joining them. Most of the clips are taken with Nokia N8 and Lumia 800. I am using Ubuntu, I have tried many of editors but I can not edit/video clips due to different video formats. Which open source editor should I use to achieve following tasks: Join different vidoe formats/encoding to produce on single movie Export to different formats (.avi, youtube, etc) Add texts on the clips and insert images I don't want to install and try many of them.

  Read the article

• How to make audio and video streaming servers work?

  - by Santosh Linkha

  I am PHP MySQL developer and I am interested in the way television and radio are broadcasted over Internet live. I want to know how it works and and what are its requirements (which package of which programming language offers the best). And please clarify me: Websites are stored in servers. From my desktop, if I want to broadcast some video, then I need to connect to webserver (to upstream the video). Is there an application to do that (or do I have to code that or embed in my web application and which programming language would be suitable (does Python support that))? And I also need a script to handle the upstreamed video or audio (can I do that with PHP)?

  Read the article

• Ubuntu raid 1 write errors

  - by Micah

  I have an Ubuntu server set up with two SATA drives in a RAID 1 configuration with MDADM. The machine is used to record raw video, which involves a lot of writing to the disk. Sometimes during video recording the computer will crash, will the following errors in kern.log: Mar 15 10:39:41 video kernel: [414501.629864] ata2.00: exception Emask 0x10 SAct 0x0 SErr 0x400100 action 0x6 Mar 15 10:39:41 video kernel: [414501.629870] ata2.00: BMDMA stat 0x26 Mar 15 10:39:41 video kernel: [414501.629875] ata2.00: SError: { UnrecovData Handshk } Mar 15 10:39:41 video kernel: [414501.629880] ata2.00: failed command: WRITE DMA EXT Mar 15 10:39:41 video kernel: [414501.629889] ata2.00: cmd 35/00:00:28:6d:f6/00:04:06:00:00/e0 tag 0 dma 524288 out Mar 15 10:39:41 video kernel: [414501.629891] res 51/84:b1:77:6e:f6/84:02:06:00:00/e0 Emask 0x30 (host bus error) Mar 15 10:39:41 video kernel: [414501.629896] ata2.00: status: { DRDY ERR } Mar 15 10:39:41 video kernel: [414501.629899] ata2.00: error: { ICRC ABRT } Mar 15 10:39:41 video kernel: [414501.629910] ata2.00: hard resetting link Mar 15 10:39:41 video kernel: [414501.973009] ata2.01: hard resetting link Mar 15 10:39:41 video kernel: [414502.482642] ata2.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) Mar 15 10:39:41 video kernel: [414502.482658] ata2.01: SATA link down (SStatus 0 SControl 300) Mar 15 10:39:41 video kernel: [414502.546160] ata2.00: configured for UDMA/133 Mar 15 10:39:41 video kernel: [414502.546203] ata2: EH complete Is this the result of faulty drives? Is software RAID just not performant enough for data rates ~15 MB/s, even with a quad-core i7? Thanks for your help. Edit: cat /proc/mdstat returns this: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdb1[1] sda1[0] 976760768 blocks [2/2] [UU] unused devices: <none>

  Read the article

• jQuery plugin for html5 video instream ads?

  - by dar

  Are there any jQuery plugins for html5 video to insert instream ads into the video? Most of the flash ones work by pausing the video at a particular timestamp, and playing an ad stream, then resuming the original video stream. The jquery captions plugin for html5 seems very similar, but different.

  Read the article

• Streaming and conversion of video from 3rd Parth

  - by Ashish

  Hi, I am working on a App where video has to be displayed.All these video are in .flv format, Is there any mechanism by using that I can convert this video to .mov or .m4v (supported by iphone) on the fly, so that user can view those video on their iphone or ipod. Thanks, Ashish

  Read the article

• jQuery, checking to see if video has height/width

  - by Mark

  I have a <video> element that is generated by js, and I need to get the height and width of it. var v = $('video'); v.height() returns null, because when it's run, the video hasn't yet been loaded, so no dimensions in the DOM. How do I check to see if the video has received a dimension, and if it hasn't, wait till it has to get the height and width. Thanks.

  Read the article

• Streaming video using non standard protocols

  - by Dan

  Hi - My company makes DVRs that specialize in streaming live and recorded video. The video is encoded using standard MPEG-4 codecs so the codecs in Android should have no trouble with them. However, the video is recorded using non-standard file formats and is streamed using our proprietary protocol (among other things we embed additional data such as watermarks with each frame of video). Is there any way I can take my stream pull out the frames and have it play on an Android device? Thanks!

  Read the article

• Howto play video with external audio in Silverlight?

  - by Fury

  Hi all, Is there any proper method to play synchronously video and external audio, other than simply having two MediaElement (one for video source and one for audio) started simultaneously? I need to play video with different soundtracks, but I belive that just two separated MediaElements will be out of sync at some point of time. Maybe there is some way to add audio source to the existing MediaElement with video? Platform: SL3, but SL4 will be good as well. Thanks in advance.

  Read the article

• video player for HTML 5 page not loading

  - by philippe

  I'm using VideoJS to as my video player for a project I've been working on. Basically I have a div, and I wanted to have the video player within that div, however when I load the page nothing happens, and the video is never played. In fact, the video is never loaded nor shown in the page. I basically copied the example from VideoJS' page. Any thoughts? <div class="video-js-box"> <!-- Using the Video for Everybody Embed Code http://camendesign.com/code/video_for_everybody --> <div style="position: absolute; top: 50px; left: 600px; display:none"> <video id="example_video_1" class="video-js vjs-default-skin" controls preload="auto" width="640" height="264" poster="http://video-js.zencoder.com/oceans-clip.png" data-setup='{"example_option":true}'> <source src="http://video-js.zencoder.com/oceans-clip.mp4" type='video/mp4'></source> <source src="http://video-js.zencoder.com/oceans-clip.webm" type='video/webm'>></source> <source src="http://video-js.zencoder.com/oceans-clip.ogv" type='video/ogg'></source> </video> <!-- Download links provided for devices that can't play video in the browser. --> <p class="vjs-no-video"><strong>Download Video:</strong> <a href="http://video-js.zencoder.com/oceans-clip.mp4">MP4</a>, <a href="http://video-js.zencoder.com/oceans-clip.webm">WebM</a>, <a href="http://video-js.zencoder.com/oceans-clip.ogv">Ogg</a><br> <!-- Support VideoJS by keeping this link. --> <a href="http://videojs.com">HTML5 Video Player</a> by VideoJS </p> </div> <div style="clear:both;"></div> </div><!--main-->

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >