Search Results

Search found 2808 results on 113 pages for 'volume mixer'.

Page 28/113 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

  • Almost All Logical Volumes Disappeared - Recovery?

    - by Alex
    We had a hard disc crash of one of two hard discs in a software raid with a LVM on top. The server is running Citrix xenserver. On the hard disk which is still intact, the volume group gets detected well, but only one LV is left. (some hashes replaced by "x") # lvdisplay --- Logical volume --- LV Name /dev/VG_XenStorage-x-x-x-x-408b91acdcae/MGT VG Name VG_XenStorage-x-x-x-x-408b91acdcae LV UUID x-x-x-x-x-x-vQmZ6C LV Write Access read/write LV Status available # open 0 LV Size 4.00 MiB Current LE 1 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 root@rescue ~ # vgdisplay --- Volume group --- VG Name VG_XenStorage-x-x-x-x-408b91acdcae System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 4 VG Access read/write VG Status resizable MAX LV 0 Cur LV 1 Open LV 0 Max PV 0 Cur PV 1 Act PV 1 VG Size 698.62 GiB PE Size 4.00 MiB Total PE 178848 Alloc PE / Size 1 / 4.00 MiB Free PE / Size 178847 / 698.62 GiB VG UUID x-x-x-x-x-x-53w0kL I could understand if a full physical volume is lost - but why only the logical volumes? Is there any explanation for this? Is there any way to recover the logical volumes? EDIT We are here in a rescue system. The problem is that the whole server does not boot (GRUB error 22) What we are trying to do is to access the root filesystem. But everything was in the LVM. We have only this: (parted) print Model: ATA SAMSUNG HD753LJ (scsi) Disk /dev/sdb: 750GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 750GB 750GB primary boot, lvm And this 750GB LVM volume is exactly what we see on top.

    Read the article

  • Correct stripe with for RAID-50

    - by daniel
    I've been trying to determine what the correct stripe width for a RAID-50 volume is but haven't been successful in google searches or empirical tests. The volume is built off of 4 disk spans that contain 6 disks each. If I understand it correctly, each individual span is a RAID-5 volume and the 4 spans are combined using RAID-0. However, I'm not seeing any noticable effect when I vary the stripe-width from 2-20. Suggestions?

    Read the article

  • Is there a Generic USB TouchScreen Driver 12.04?

    - by lbjoum
    Is there a Generic USB TouchScreen Driver 12.04? Device 03eb:201c I've been looking for 4 days solid (not very skilled) and can't find a solution. I have a generic tablet: C97- Atom N2600 9.7" 2GB 32GB Bluetooth WiFi WebCam Ext.3G Windows 7 Tablet PC Using 12.04 and cannot find a driver. I installed android and the touchscreen works but still lots of other bugs. Oh well, stuck with Windows 7 and not happy about it. Will keep trying, but too much time wasted already. If you have a solution I would love to try it. ubuntu@ubuntu:~$ lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 0cf2:6238 ENE Technology, Inc. Bus 001 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 001 Device 005: ID 05e1:0100 Syntek Semiconductor Co., Ltd 802.11g + Bluetooth Wireless Adapter Bus 001 Device 006: ID 090c:3731 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) (from Windows: HID\VID_03EB&PID_201C\6&5F38127&0&0000 USB\VID_03EB&PID_201C\5&193ADADC&1&2 ) Bus 001 Device 007: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09 Bus 001 Device 008: ID 192f:0916 Avago Technologies, Pte. ubuntu@ubuntu:~$ sudo lsusb -v Bus 003 Device 002: ID 03eb:201c Atmel Corp. at90usbkey sample firmware (HID mouse) Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 32 idVendor 0x03eb Atmel Corp. idProduct 0x201c at90usbkey sample firmware (HID mouse) bcdDevice 45.a2 iManufacturer 1 CDT iProduct 2 9.75 iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 34 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x00 (Missing must-be-set bit!) (Bus Powered) MaxPower 100mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 3 Human Interface Device bInterfaceSubClass 0 No Subclass bInterfaceProtocol 0 None iInterface 0 HID Device Descriptor: bLength 9 bDescriptorType 33 bcdHID 1.11 bCountryCode 0 Not supported bNumDescriptors 1 bDescriptorType 34 Report wDescriptorLength 177 Report Descriptors: ** UNAVAILABLE ** Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 5 Device Status: 0x00fb Self Powered Remote Wakeup Enabled Debug Mode ubuntu@ubuntu:~$ sudo lshw ubuntu description: Notebook product: To be filled by O.E.M. (To be filled by O.E.M.) vendor: To be filled by O.E.M. version: To be filled by O.E.M. serial: To be filled by O.E.M. width: 32 bits capabilities: smbios-2.7 dmi-2.7 smp-1.4 smp configuration: boot=normal chassis=notebook cpus=2 family=To be filled by O.E.M. sku=To be filled by O.E.M. uuid=00020003-0004-0005-0006-000700080009 *-core description: Motherboard product: Tiger Hill vendor: INTEL Corporation physical id: 0 version: To be filled by O.E.M. serial: To be filled by O.E.M. slot: To be filled by O.E.M. *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: 4.6.5 date: 08/24/2012 size: 64KiB capacity: 960KiB capabilities: pci upgrade shadowing cdboot bootselect socketedrom edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification *-cpu:0 description: CPU product: Intel(R) Atom(TM) CPU N2600 @ 1.60GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 slot: CPU 1 size: 1600MHz capacity: 1600MHz width: 64 bits clock: 400MHz capabilities: x86-64 boot fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe nx constant_tsc arch_perfmon pebs bts nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm movbe lahf_lm arat configuration: cores=2 enabledcores=1 id=2 threads=2 *-cache:0 description: L1 cache physical id: 5 slot: L1-Cache size: 24KiB capacity: 24KiB capabilities: internal write-back unified *-cache:1 description: L2 cache physical id: 6 slot: L2-Cache size: 512KiB capacity: 512KiB capabilities: internal varies unified *-logicalcpu:0 description: Logical CPU physical id: 2.1 width: 64 bits capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 width: 64 bits capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 width: 64 bits capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 width: 64 bits capabilities: logical *-memory description: System Memory physical id: 28 slot: System board or motherboard size: 2GiB *-bank:0 description: SODIMM [empty] product: [Empty] vendor: [Empty] physical id: 0 serial: [Empty] slot: DIMM0 *-bank:1 description: SODIMM DDR3 Synchronous 800 MHz (1.2 ns) vendor: 69 physical id: 1 serial: 00000210 slot: DIMM1 size: 2GiB width: 64 bits clock: 800MHz (1.2ns) *-cpu:1 physical id: 1 bus info: cpu@1 version: 6.6.1 serial: 0003-0661-0000-0000-0000-0000 size: 1600MHz capabilities: ht configuration: id=2 *-logicalcpu:0 description: Logical CPU physical id: 2.1 capabilities: logical *-logicalcpu:1 description: Logical CPU physical id: 2.2 capabilities: logical *-logicalcpu:2 description: Logical CPU physical id: 2.3 capabilities: logical *-logicalcpu:3 description: Logical CPU physical id: 2.4 capabilities: logical *-pci description: Host bridge product: Atom Processor D2xxx/N2xxx DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 03 width: 32 bits clock: 33MHz *-display UNCLAIMED description: VGA compatible controller product: Atom Processor D2xxx/N2xxx Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 32 bits clock: 33MHz capabilities: pm msi vga_controller bus_master cap_list configuration: latency=0 resources: memory:dfe00000-dfefffff ioport:f100(size=8) *-multimedia description: Audio device product: N10/ICH 7 Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 02 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:42 memory:dff00000-dff03fff *-pci:0 description: PCI bridge product: N10/ICH 7 Family PCI Express Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 02 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:2000(size=4096) memory:80000000-801fffff ioport:80200000(size=2097152) *-usb:0 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:23 ioport:f0a0(size=32) *-usb:1 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #2 vendor: Intel Corporation physical id: 1d.1 bus info: pci@0000:00:1d.1 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:19 ioport:f080(size=32) *-usb:2 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #3 vendor: Intel Corporation physical id: 1d.2 bus info: pci@0000:00:1d.2 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:18 ioport:f060(size=32) *-usb:3 description: USB controller product: N10/ICH 7 Family USB UHCI Controller #4 vendor: Intel Corporation physical id: 1d.3 bus info: pci@0000:00:1d.3 version: 02 width: 32 bits clock: 33MHz capabilities: uhci bus_master configuration: driver=uhci_hcd latency=0 resources: irq:16 ioport:f040(size=32) *-usb:4 description: USB controller product: N10/ICH 7 Family USB2 EHCI Controller vendor: Intel Corporation physical id: 1d.7 bus info: pci@0000:00:1d.7 version: 02 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:dff05000-dff053ff *-pci:1 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: e2 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: NM10 Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 02 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: N10/ICH7 Family SATA Controller [AHCI mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 02 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:41 ioport:f0f0(size=8) ioport:f0e0(size=4) ioport:f0d0(size=8) ioport:f0c0(size=4) ioport:f020(size=16) memory:dff04000-dff043ff *-disk description: ATA Disk product: BIWIN SSD physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 1206 serial: 123403501060 size: 29GiB (32GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=8fbe402b *-volume:0 description: Windows NTFS volume physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: 3.1 serial: 249bde5d-8246-9a40-88c7-2d5e3bcaf692 size: 19GiB capacity: 19GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-04-04 02:27:51 filesystem=ntfs state=clean *-volume:1 description: Windows NTFS volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 3.1 serial: de12d40f-d5ca-8642-b306-acd9349fda1a size: 10231MiB capacity: 10GiB capabilities: primary ntfs initialized configuration: clustersize=4096 created=2011-04-04 01:52:26 filesystem=ntfs state=clean *-serial UNCLAIMED description: SMBus product: N10/ICH 7 Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 02 width: 32 bits clock: 33MHz configuration: latency=0 resources: ioport:f000(size=32) *-scsi:0 physical id: 2 bus info: usb@1:1 logical name: scsi4 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/sdb size: 29GiB (31GB) capabilities: partitioned partitioned:dos configuration: signature=00017463 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@4:0.0.0,1 logical name: /dev/sdb1 logical name: /cdrom version: FAT32 serial: 129b-4f87 size: 29GiB capacity: 29GiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat mount.fstype=vfat mount.options=rw,relatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro state=mounted *-scsi:1 physical id: 3 bus info: usb@1:3.1 logical name: scsi6 capabilities: emulated scsi-host configuration: driver=usb-storage *-disk description: SCSI Disk physical id: 0.0.0 bus info: scsi@6:0.0.0 logical name: /dev/sdc size: 7400MiB (7759MB) capabilities: partitioned partitioned:dos configuration: signature=c3072e18 *-volume description: Windows FAT volume vendor: mkdosfs physical id: 1 bus info: scsi@6:0.0.0,1 logical name: /dev/sdc1 logical name: /media/JOUM8G version: FAT32 serial: e676-9311 size: 7394MiB capacity: 7394MiB capabilities: primary bootable fat initialized configuration: FATs=2 filesystem=fat label=Android mount.fstype=vfat mount.options=rw,nosuid,nodev,relatime,uid=999,gid=999,fmask=0022,dmask=0077,codepage=cp437,iocharset=iso8859-1,shortname=mixed,showexec,utf8,flush,errors=remount-ro state=mounted ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ xinput list ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? Plus More Enterprise LTD. USB-compliant keyboard id=10 [slave pointer (2)] ? ? USB Optical Mouse id=11 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Power Button id=7 [slave keyboard (3)] ? Sleep Button id=8 [slave keyboard (3)] ? Plus More Enterprise LTD. USB-compliant keyboard id=9 [slave keyboard (3)] ? USB 2.0 Webcam - Front id=12 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=13 [slave keyboard (3)] ubuntu@ubuntu:~$

    Read the article

  • Make the sound louder in Lubuntu

    - by Andrew
    I have a Toshiba r835 running Lubuntu 11.10. Turning the volume slider up all the way doesn't give very loud sound. I've tried typing alsamixer in a terminal and turning up all the levels there to maximum, but the speakers are still fairly quiet. Is there a simple way to increase maximum volume in software? I understand that there are physical limits to the sound the laptop's speakers can produce, but I suspect my maximum volume is limited by software. EDIT: This is exactly the type of solution I'm looking for. However, it doesn't work for me. What I did: sudo pico /etc/asound.conf This file does not exist, so I create a new one, containing: pcm.!default { type plug slave.pcm "softvol" } pcm.softvol { type softvol slave { pcm "dmix" } control { name "Pre-Amp" card 0 } min_dB -5.0 max_dB 20.0 resolution 6 } I reboot the machine, and type alsamixer. I use my left/right arrow keys to inspect the various volume options. I expect to see a new option, called Pre-Amp, but I don't see one. This fix seems to work for other people. Why doesn't this fix work for me?

    Read the article

  • Partition does not start on physical sector boundary?

    - by jasmines
    I've one HD on my laptop, with two partitions (one ext3 with Ubuntu 12.04 installed and one swap). fdisk is giving me a Partition 1 does not start on physical sector boundary warning. What is the cause and do I need to fix it? If so, how? This is sudo fdisk -l: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 testine, 63 settori/tracce, 91201 cilindri, totale 1465149168 settori Unità = settori di 1 * 512 = 512 byte Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Identificativo disco: 0x5a25087f Dispositivo Boot Start End Blocks Id System /dev/sda1 * 63 1448577023 724288480+ 83 Linux Partition 1 does not start on physical sector boundary. /dev/sda2 1448577024 1465147391 8285184 82 Linux swap / Solaris This is sudo lshw related result: *-disk description: ATA Disk product: WDC WD7500BPKT-0 vendor: Western Digital physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 01.0 serial: WD-WX21CC1T0847 size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=5a25087f *-volume:0 description: EXT3 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: cc5c562a-bc59-4a37-b589-805b27b2cbd7 size: 690GiB capacity: 690GiB capabilities: primary bootable journaled extended_attributes large_files recover ext3 ext2 initialized configuration: created=2010-02-27 09:18:28 filesystem=ext3 modified=2012-06-23 18:33:59 mount.fstype=ext3 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-06-28 00:20:47 state=mounted *-volume:1 description: Linux swap volume physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 version: 1 serial: 16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 size: 8091MiB capacity: 8091MiB capabilities: primary nofs swap initialized configuration: filesystem=swap pagesize=4096 These are related /etc/fstab lines: UUID=cc5c562a-bc59-4a37-b589-805b27b2cbd7 / ext3 errors=remount-ro,user_xattr 0 1 UUID=16a7fee0-be9e-4e34-9dc3-28f4eeb61bf6 none swap sw 0 0

    Read the article

  • Will Ubuntu Live CD move MFT to resize NTFS volumes?

    - by irwazr
    I have a feeling some will consider this a duplicate, but please hear me out. I've been reading tons of questions and threads around this but have never really found an answer for this specifically. I want to shrink my NTFS partition to make room for a Ubuntu install, so I can dual boot them. However when shrinking the NTFS volume in Windows disk management, it will only go so far as the MFT is sitting near the end of the volume. I've read plenty of posts about why it does this, and how difficult/dangerous it is to move the MFT etc. I've also read that Perfect Disk can apparently do it under it's trial period, but I remain cautious to try this method. I was wondering however if the disk partitioning utility included in the Ubuntu install wizard handles the moving of the MFT when dragging the partition boundaries. It all seems too simple that you simply tell it the new size you want it to be. Would it tell me if it couldn't resize by the amount you requested if the MFT was an issue, or move it for you if it were able. I'm concerned it might corrupt the MFT and the volume, even though I doubt the install wizard would be so daft. So what exactly is the deal with the partition resizing tool in the Ubuntu install wizard? Will it safely resize my NTFS volume despite the location of my MFT? Thanks in advance.

    Read the article

  • How I can get PUID from mp3-file?

    - by volume
    I want to streamline my library on FreeBsd using PUID from MusicBrainz. I need a command line utility for this, but I have not been able to find. It would be nice to give input mp3-file and receive PUID as result.

    Read the article

  • Kubuntu 12.04 - Touchpad and keyboard stopped working at random

    - by StepTNT
    As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

    Read the article

  • Assign programs permanently to different sound-outputs – PulseAudio.

    - by Mood
    I want to assign Skype input and output to my USB-headset while the rest of my laptop uses the internal sound-card. This is an easy task with PulseAudio Volume control (pavucontrol). The only problem I have is every time a call is made I manually have to set the output and input for Skype to my USB-device . When I hang up, Skype disappears from Volume Control. It reappears again with the next call only this time the default sound-card is selected again. It shouldn’t be hard to let PulseAudio look or the USB-headset is connected when Skype audio comes is before selecting the default. The way to do it is obvious not through Volume Control.

    Read the article

  • Exchange 2013 goes RTM!

    - by marc dekeyser
    Exchange 2013 has been signed off and is now RTM! Hoozaaa!!   From the Exchange team blog: Today we reached an important milestone in the development of the new Exchange. Moments ago, the Exchange engineering team signed off on the Release to Manufacturing (RTM) build. This milestone means the coding and testing phase of the project is complete and we are now focused on releasing the new Exchange via multiple distribution channels to our business customers. General availability is planned for the first quarter of 2013. We have a number of programs that provide business customers with early access so they can begin testing, piloting and adopting Exchange within their organizations: We will begin rolling out new capabilities to Office 365 Enterprise customers in our next service updates, starting in November through general availability. Volume Licensing customers with Software Assurance will be able to download Exchange Server 2013 through the Volume Licensing Service Center by mid-November. These products will be available on the Volume Licensing price list on December 1. Read more…

    Read the article

  • Can't make the Multimedia keys work in LXDE

    - by Uri Herrera
    I've tried to edit the configuration file in ~/.config/openbox/lxde-rc.xml however the changes don't take effect, i still can't use the keys. The LXDE wiki shows that after finding that my keyboard sends the correct standardized keyboard events i should go and edit the file to my liking, the keyboard does send the correct events and the keys are properly identified yet nothing happens. Since LXDE doesn't come with a sound preferences option i have installed xfce4-mixer. I too have a netbook running Lubuntu and it's media keys are working fine, i don't know if what i installed has had something to do here?. I also installed xfce4-volumed volume keys daemon from synaptic but to no avail, still nothing. How can i make the multimedia keys of my keyboard work in LXDE with xfce4-mixer Edit: Here is my lxde-rc.xml file

    Read the article

  • How to switch 'default' sound device controlled by hardware keys in Xubuntu?

    - by Ruth
    I installed xubuntu-desktop on a 12.04 Ubuntu upgrade after finding Gnome3 lacking. I've mostly been happy, but I've found an odd and frustrating bug. My laptop has two sound 'outputs' - an HDMI-out plug I never use, and the onboard speakers/headphones. For some reason, the hardware keys have been mapped to the HDMI output, even if I set it as 'fallback' in pavucontrol, and notify-osd only displays changes in the HDMI output (though the panel indicator volume control controls onboard sound). I'd ideally like both hardware keys and notify-osd to be looking at the onboard sound, though if I can't get notify-osd it's an acceptable loss. Having to click through a bunch of stuff to change volume is driving me crazy, though. Googling suggested that it /may/ be a Pulseaudio/ALSA conflict, but the hardware keys seem to change at least indicated volume in pavucontrol for HDMI as expected (I don't have an HDMI cable to test actual sound output)

    Read the article

  • asus n550jv audio problem: no sound from notebook' speakers

    - by skywalker
    Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

    Read the article

  • Removing mdadm array and converting to regular disks while preserving data

    - by Jeffrey Kevin Pry
    I have a 6 disk (2TB each) mdadm RAID 5 volume created in Ubuntu 12.04 Server. However, I'm moving to a different solution and want to "unraid" my disks but keep the data. Only 50% is in use. From what I can surmise I basically have to do this recursively for each physical disk. Fail the disk Format the failed disk Move a portion of files to the new disk. Reshape the array Shrink the logical volume md0 This seems like a very time consuming process. Is there an easier way to do this (automatically perhaps) without buying new disks to temporarily hold the data? I am also aware that during this processing my RAID volume will be degraded and vulnerable the entire time. I am not too concerned about this and will be using battery backup and moving the most important files off first. Thank you for your help!

    Read the article

  • Switching songs - MediaPlayer lags the game

    - by Fibericon
    When the player encounters a boss in the game I'm working on, I want to have the music change. It seems simple enough with the MediaPlayer class to fade out the current song, switch to another, and then fade the new song in. However, at the point where the second song starts, the game freezes for a split second. The songs in question aren't particularly large either - the first song is 1.7mb and the second song is 3.1mb, both mp3 format. This is the code I'm using to do it: protected void switchSong(GameTime gameTime) { if (!bossSongPlaying) { MediaPlayer.Volume -= ((float)gameTime.ElapsedGameTime.TotalSeconds/10); if (MediaPlayer.Volume < 0.05f) { MediaPlayer.Play(bossSong); MediaPlayer.Volume = 1.0f; bossSongPlaying = true; } } } What can I do to eliminate that momentary hang?

    Read the article

  • Assign programs permanently to different sound-outputs in Pulseaudio?

    - by Mood
    I want to assign Skype input and output to my USB-headset while the rest of my laptop uses the internal sound-card. This is an easy task with PulseAudio Volume control (pavucontrol). The only problem I have is every time a call is made I manually have to set the output and input for Skype to my USB-device . When I hang up, Skype disappears from Volume Control. It reappears again with the next call only this time the default sound-card is selected again. It shouldn’t be hard to let PulseAudio look or the USB-headset is connected when Skype audio comes is before selecting the default. The way to do it is obvious not through Volume Control.

    Read the article

  • State Pattern - should a state know about its context?

    - by Extrakun
    I am referring to the state pattern as described in this link. In the example class diagram, a context has numerous states. However, it does not show how does a state communicates with a context (perhaps an input in a state has impact on a setting in the context). The two examples on the page shows either passing the context to the state via a function, or storing a reference to the context. Are those advisable? Are there other ways for a state to communicate with a context? Update to an edit: For instance, I am doing a remote control which can have several states. Say, the context has a setting for Volume, and I am in one of the states which allow me to tweak the volume. How should the state communicates with the context that the volume is being changed?

    Read the article

  • Constant noise in speakers and headphones

    - by user103978
    On my laptop, Samsung 300V5A-S19 I have the constant noise from the speakers. If I wear headphones, the sound becomes more pronounced (at half volume it mutes the music). The noise level is independent of the volume control. The noise disappears only when volume is completely muted. For the record, the sound is reminiscent of the noise of the waves or something like that. System information: Ubuntu 12.10, kernel 3.5.0-18 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04) All packages in the system updated. PS: Following the advice from this message (click) yielded no result.

    Read the article

  • LVM / Device Mapper maps wrong device

    - by DaDaDom
    Hi, I run a LVM setup on a raid1 created by mdadm. md2 is based on sda6 (major:minor 8:6) and sdb6 (8:22). md2 is partition 9:2. The VG on top of md2 has 4 LVs, var, home, usr, tmp. First the problem: While booting it seems as if the device mapper takes the wrong partition for the mapping! Immediately after boot the information is like ~# dmsetup table systemlvm-home: 0 4194304 linear 8:22 384 systemlvm-home: 4194304 16777216 linear 8:22 69206400 systemlvm-home: 20971520 8388608 linear 8:22 119538048 systemlvm-home: 29360128 6291456 linear 8:22 243270016 systemlvm-tmp: 0 2097152 linear 8:22 41943424 systemlvm-usr: 0 10485760 linear 8:22 20971904 systemlvm-var: 0 10485760 linear 8:22 10486144 systemlvm-var: 10485760 6291456 linear 8:22 4194688 systemlvm-var: 16777216 4194304 linear 8:22 44040576 systemlvm-var: 20971520 10485760 linear 8:22 31457664 systemlvm-var: 31457280 20971520 linear 8:22 48234880 systemlvm-var: 52428800 33554432 linear 8:22 85983616 systemlvm-var: 85983232 115343360 linear 8:22 127926656 ~# cat /proc/mdstat Personalities : [raid1] md2 : active (auto-read-only) raid1 sda6[0] 151798080 blocks [2/1] [U_] md0 : active raid1 sda1[0] sdb1[1] 96256 blocks [2/2] [UU] md1 : active raid1 sda2[0] sdb2[1] 2931776 blocks [2/2] [UU] I have to manually "lvchange -an" all LVs, add /dev/sdb6 back to the raid and reactivate the LVs, then all is fine. But it prevents me from automounting the partitions and obviously leads to a bunch of other problems. If everything works fine, the information is like ~$ cat /proc/mdstat Personalities : [raid1] md2 : active raid1 sdb6[1] sda6[0] 151798080 blocks [2/2] [UU] ... ~# dmsetup table systemlvm-home: 0 4194304 linear 9:2 384 systemlvm-home: 4194304 16777216 linear 9:2 69206400 systemlvm-home: 20971520 8388608 linear 9:2 119538048 systemlvm-home: 29360128 6291456 linear 9:2 243270016 systemlvm-tmp: 0 2097152 linear 9:2 41943424 systemlvm-usr: 0 10485760 linear 9:2 20971904 systemlvm-var: 0 10485760 linear 9:2 10486144 systemlvm-var: 10485760 6291456 linear 9:2 4194688 systemlvm-var: 16777216 4194304 linear 9:2 44040576 systemlvm-var: 20971520 10485760 linear 9:2 31457664 systemlvm-var: 31457280 20971520 linear 9:2 48234880 systemlvm-var: 52428800 33554432 linear 9:2 85983616 systemlvm-var: 85983232 115343360 linear 9:2 127926656 I think that LVM for some reason just "takes" /dev/sdb6 which is then missing in the raid. I tried almost all options in the lvm.conf but none seems to work. Below is some more information, like config files. Does anyone have any idea about what is going on here and how to prevent that? If you need any additional information, please let me know Thanks in advance! Dominik The information (off a "repaired" system): ~# cat /etc/debian_version 5.0.4 ~# uname -a Linux kermit 2.6.26-2-686 #1 SMP Wed Feb 10 08:59:21 UTC 2010 i686 GNU/Linux ~# lvm version LVM version: 2.02.39 (2008-06-27) Library version: 1.02.27 (2008-06-25) Driver version: 4.13.0 ~# cat /etc/mdadm/mdadm.conf DEVICE partitions ARRAY /dev/md1 level=raid1 num-devices=2 metadata=00.90 UUID=11e9dc6c:1da99f3f:b3088ca6:c6fe60e9 ARRAY /dev/md0 level=raid1 num-devices=2 metadata=00.90 UUID=92ed1e4b:897361d3:070682b3:3baa4fa1 ARRAY /dev/md2 level=raid1 num-devices=2 metadata=00.90 UUID=601d4642:39dc80d7:96e8bbac:649924ba ~# mount /dev/md1 on / type ext3 (rw,errors=remount-ro) tmpfs on /lib/init/rw type tmpfs (rw,nosuid,mode=0755) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=620) /dev/md0 on /boot type ext3 (rw) /dev/mapper/systemlvm-usr on /usr type reiserfs (rw) /dev/mapper/systemlvm-tmp on /tmp type reiserfs (rw) /dev/mapper/systemlvm-home on /home type reiserfs (rw) /dev/mapper/systemlvm-var on /var type reiserfs (rw) ~# grep -v ^$ /etc/lvm/lvm.conf | grep -v "#" devices { dir = "/dev" scan = [ "/dev" ] preferred_names = [ ] filter = [ "a|/dev/md.*|", "r/.*/" ] cache_dir = "/etc/lvm/cache" cache_file_prefix = "" write_cache_state = 1 sysfs_scan = 1 md_component_detection = 1 ignore_suspended_devices = 0 } log { verbose = 0 syslog = 1 overwrite = 0 level = 0 indent = 1 command_names = 0 prefix = " " } backup { backup = 1 backup_dir = "/etc/lvm/backup" archive = 1 archive_dir = "/etc/lvm/archive" retain_min = 10 retain_days = 30 } shell { history_size = 100 } global { umask = 077 test = 0 units = "h" activation = 1 proc = "/proc" locking_type = 1 fallback_to_clustered_locking = 1 fallback_to_local_locking = 1 locking_dir = "/lib/init/rw" } activation { missing_stripe_filler = "/dev/ioerror" reserved_stack = 256 reserved_memory = 8192 process_priority = -18 mirror_region_size = 512 readahead = "auto" mirror_log_fault_policy = "allocate" mirror_device_fault_policy = "remove" } :~# vgscan -vvv Processing: vgscan -vvv O_DIRECT will be used Setting global/locking_type to 1 File-based locking selected. Setting global/locking_dir to /lib/init/rw Locking /lib/init/rw/P_global WB Wiping cache of LVM-capable devices /dev/block/1:0: Added to device cache /dev/block/1:1: Added to device cache /dev/block/1:10: Added to device cache /dev/block/1:11: Added to device cache /dev/block/1:12: Added to device cache /dev/block/1:13: Added to device cache /dev/block/1:14: Added to device cache /dev/block/1:15: Added to device cache /dev/block/1:2: Added to device cache /dev/block/1:3: Added to device cache /dev/block/1:4: Added to device cache /dev/block/1:5: Added to device cache /dev/block/1:6: Added to device cache /dev/block/1:7: Added to device cache /dev/block/1:8: Added to device cache /dev/block/1:9: Added to device cache /dev/block/253:0: Added to device cache /dev/block/253:1: Added to device cache /dev/block/253:2: Added to device cache /dev/block/253:3: Added to device cache /dev/block/8:0: Added to device cache /dev/block/8:1: Added to device cache /dev/block/8:16: Added to device cache /dev/block/8:17: Added to device cache /dev/block/8:18: Added to device cache /dev/block/8:19: Added to device cache /dev/block/8:2: Added to device cache /dev/block/8:21: Added to device cache /dev/block/8:22: Added to device cache /dev/block/8:3: Added to device cache /dev/block/8:5: Added to device cache /dev/block/8:6: Added to device cache /dev/block/9:0: Already in device cache /dev/block/9:1: Already in device cache /dev/block/9:2: Already in device cache /dev/bsg/0:0:0:0: Not a block device /dev/bsg/1:0:0:0: Not a block device /dev/bus/usb/001/001: Not a block device [... many more "not a block device"] /dev/core: Not a block device /dev/cpu_dma_latency: Not a block device /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/ata-SAMSUNG_HD160JJ_S08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-id/dm-name-systemlvm-home: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/dm-name-systemlvm-tmp: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-name-systemlvm-usr: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-name-systemlvm-var: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr25N7CRZpUMzR18NfS6zeSeAVnVT98LuU: Aliased to /dev/block/253:0 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr3TpFXtLjYGEwn79IdXsSCZPl8AxmqbmQ: Aliased to /dev/block/253:1 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrc5MJ4KolevMjt85PPBrQuRTkXbx6NvTi: Aliased to /dev/block/253:3 in device cache /dev/disk/by-id/dm-uuid-LVM-rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvrYXrfdg5OSYDVkNeiQeQksgCI849Z2hx8: Aliased to /dev/block/253:2 in device cache /dev/disk/by-id/md-uuid-11e9dc6c:1da99f3f:b3088ca6:c6fe60e9: Already in device cache /dev/disk/by-id/md-uuid-601d4642:39dc80d7:96e8bbac:649924ba: Already in device cache /dev/disk/by-id/md-uuid-92ed1e4b:897361d3:070682b3:3baa4fa1: Already in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895: Aliased to /dev/block/8:16 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L507895-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800: Aliased to /dev/block/8:0 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-id/scsi-SATA_SAMSUNG_HD160JJS08HJ10L526800-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0: Aliased to /dev/block/8:0 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part1: Aliased to /dev/block/8:1 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part2: Aliased to /dev/block/8:2 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part3: Aliased to /dev/block/8:3 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part5: Aliased to /dev/block/8:5 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-0:0:0:0-part6: Aliased to /dev/block/8:6 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0: Aliased to /dev/block/8:16 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part1: Aliased to /dev/block/8:17 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part2: Aliased to /dev/block/8:18 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part3: Aliased to /dev/block/8:19 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part5: Aliased to /dev/block/8:21 in device cache /dev/disk/by-path/pci-0000:00:0f.0-scsi-1:0:0:0-part6: Aliased to /dev/block/8:22 in device cache /dev/disk/by-uuid/13c1262b-e06f-40ce-b088-ce410640a6dc: Aliased to /dev/block/253:3 in device cache /dev/disk/by-uuid/379f57b0-2e03-414c-808a-f76160617336: Aliased to /dev/block/253:2 in device cache /dev/disk/by-uuid/4fb2d6d3-bd51-48d3-95ee-8e404faf243d: Already in device cache /dev/disk/by-uuid/5c6728ec-82c1-49c0-93c5-f6dbd5c0d659: Aliased to /dev/block/8:5 in device cache /dev/disk/by-uuid/a13cdfcd-2191-4185-a727-ffefaf7a382e: Aliased to /dev/block/253:1 in device cache /dev/disk/by-uuid/e0d5893d-ff88-412f-b753-9e3e9af3242d: Aliased to /dev/block/8:21 in device cache /dev/disk/by-uuid/e79c9da6-8533-4e55-93ec-208876671edc: Aliased to /dev/block/253:0 in device cache /dev/disk/by-uuid/f3f176f5-12f7-4af8-952a-c6ac43a6e332: Already in device cache /dev/dm-0: Aliased to /dev/block/253:0 in device cache (preferred name) /dev/dm-1: Aliased to /dev/block/253:1 in device cache (preferred name) /dev/dm-2: Aliased to /dev/block/253:2 in device cache (preferred name) /dev/dm-3: Aliased to /dev/block/253:3 in device cache (preferred name) /dev/fd: Symbolic link to directory /dev/full: Not a block device /dev/hpet: Not a block device /dev/initctl: Not a block device /dev/input/by-path/platform-i8042-serio-0-event-kbd: Not a block device /dev/input/event0: Not a block device /dev/input/mice: Not a block device /dev/kmem: Not a block device /dev/kmsg: Not a block device /dev/log: Not a block device /dev/loop/0: Added to device cache /dev/MAKEDEV: Not a block device /dev/mapper/control: Not a block device /dev/mapper/systemlvm-home: Aliased to /dev/dm-2 in device cache /dev/mapper/systemlvm-tmp: Aliased to /dev/dm-3 in device cache /dev/mapper/systemlvm-usr: Aliased to /dev/dm-1 in device cache /dev/mapper/systemlvm-var: Aliased to /dev/dm-0 in device cache /dev/md0: Already in device cache /dev/md1: Already in device cache /dev/md2: Already in device cache /dev/mem: Not a block device /dev/net/tun: Not a block device /dev/network_latency: Not a block device /dev/network_throughput: Not a block device /dev/null: Not a block device /dev/port: Not a block device /dev/ppp: Not a block device /dev/psaux: Not a block device /dev/ptmx: Not a block device /dev/pts/0: Not a block device /dev/ram0: Aliased to /dev/block/1:0 in device cache (preferred name) /dev/ram1: Aliased to /dev/block/1:1 in device cache (preferred name) /dev/ram10: Aliased to /dev/block/1:10 in device cache (preferred name) /dev/ram11: Aliased to /dev/block/1:11 in device cache (preferred name) /dev/ram12: Aliased to /dev/block/1:12 in device cache (preferred name) /dev/ram13: Aliased to /dev/block/1:13 in device cache (preferred name) /dev/ram14: Aliased to /dev/block/1:14 in device cache (preferred name) /dev/ram15: Aliased to /dev/block/1:15 in device cache (preferred name) /dev/ram2: Aliased to /dev/block/1:2 in device cache (preferred name) /dev/ram3: Aliased to /dev/block/1:3 in device cache (preferred name) /dev/ram4: Aliased to /dev/block/1:4 in device cache (preferred name) /dev/ram5: Aliased to /dev/block/1:5 in device cache (preferred name) /dev/ram6: Aliased to /dev/block/1:6 in device cache (preferred name) /dev/ram7: Aliased to /dev/block/1:7 in device cache (preferred name) /dev/ram8: Aliased to /dev/block/1:8 in device cache (preferred name) /dev/ram9: Aliased to /dev/block/1:9 in device cache (preferred name) /dev/random: Not a block device /dev/root: Already in device cache /dev/rtc: Not a block device /dev/rtc0: Not a block device /dev/sda: Aliased to /dev/block/8:0 in device cache (preferred name) /dev/sda1: Aliased to /dev/block/8:1 in device cache (preferred name) /dev/sda2: Aliased to /dev/block/8:2 in device cache (preferred name) /dev/sda3: Aliased to /dev/block/8:3 in device cache (preferred name) /dev/sda5: Aliased to /dev/block/8:5 in device cache (preferred name) /dev/sda6: Aliased to /dev/block/8:6 in device cache (preferred name) /dev/sdb: Aliased to /dev/block/8:16 in device cache (preferred name) /dev/sdb1: Aliased to /dev/block/8:17 in device cache (preferred name) /dev/sdb2: Aliased to /dev/block/8:18 in device cache (preferred name) /dev/sdb3: Aliased to /dev/block/8:19 in device cache (preferred name) /dev/sdb5: Aliased to /dev/block/8:21 in device cache (preferred name) /dev/sdb6: Aliased to /dev/block/8:22 in device cache (preferred name) /dev/shm/network/ifstate: Not a block device /dev/snapshot: Not a block device /dev/sndstat: stat failed: Datei oder Verzeichnis nicht gefunden /dev/stderr: Not a block device /dev/stdin: Not a block device /dev/stdout: Not a block device /dev/systemlvm/home: Aliased to /dev/dm-2 in device cache /dev/systemlvm/tmp: Aliased to /dev/dm-3 in device cache /dev/systemlvm/usr: Aliased to /dev/dm-1 in device cache /dev/systemlvm/var: Aliased to /dev/dm-0 in device cache /dev/tty: Not a block device /dev/tty0: Not a block device [... many more "not a block device"] /dev/vcsa6: Not a block device /dev/xconsole: Not a block device /dev/zero: Not a block device Wiping internal VG cache lvmcache: initialised VG #orphans_lvm1 lvmcache: initialised VG #orphans_pool lvmcache: initialised VG #orphans_lvm2 Reading all physical volumes. This may take a while... Finding all volume groups /dev/ram0: Skipping (regex) /dev/loop/0: Skipping (sysfs) /dev/sda: Skipping (regex) Opened /dev/md0 RO /dev/md0: size is 192512 sectors Closed /dev/md0 /dev/md0: size is 192512 sectors Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes Closed /dev/md0 Using /dev/md0 Opened /dev/md0 RW O_DIRECT /dev/md0: block size is 1024 bytes /dev/md0: No label detected Closed /dev/md0 /dev/dm-0: Skipping (regex) /dev/ram1: Skipping (regex) /dev/sda1: Skipping (regex) Opened /dev/md1 RO /dev/md1: size is 5863552 sectors Closed /dev/md1 /dev/md1: size is 5863552 sectors Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes Closed /dev/md1 Using /dev/md1 Opened /dev/md1 RW O_DIRECT /dev/md1: block size is 4096 bytes /dev/md1: No label detected Closed /dev/md1 /dev/dm-1: Skipping (regex) /dev/ram2: Skipping (regex) /dev/sda2: Skipping (regex) Opened /dev/md2 RO /dev/md2: size is 303596160 sectors Closed /dev/md2 /dev/md2: size is 303596160 sectors Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes Closed /dev/md2 Using /dev/md2 Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Closed /dev/md2 /dev/dm-2: Skipping (regex) /dev/ram3: Skipping (regex) /dev/sda3: Skipping (regex) /dev/dm-3: Skipping (regex) /dev/ram4: Skipping (regex) /dev/ram5: Skipping (regex) /dev/sda5: Skipping (regex) /dev/ram6: Skipping (regex) /dev/sda6: Skipping (regex) /dev/ram7: Skipping (regex) /dev/ram8: Skipping (regex) /dev/ram9: Skipping (regex) /dev/ram10: Skipping (regex) /dev/ram11: Skipping (regex) /dev/ram12: Skipping (regex) /dev/ram13: Skipping (regex) /dev/ram14: Skipping (regex) /dev/ram15: Skipping (regex) /dev/sdb: Skipping (regex) /dev/sdb1: Skipping (regex) /dev/sdb2: Skipping (regex) /dev/sdb3: Skipping (regex) /dev/sdb5: Skipping (regex) /dev/sdb6: Skipping (regex) Locking /lib/init/rw/V_systemlvm RB Finding volume group "systemlvm" Opened /dev/md2 RW O_DIRECT /dev/md2: block size is 4096 bytes /dev/md2: lvm2 label detected lvmcache: /dev/md2: now in VG #orphans_lvm2 (#orphans_lvm2) with 1 mdas /dev/md2: Found metadata at 39936 size 2632 (in area at 2048 size 194560) for systemlvm (rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr) lvmcache: /dev/md2: now in VG systemlvm with 1 mdas lvmcache: /dev/md2: setting systemlvm VGID to rL8Oq2dA7oeRYeu1orJA7Ufnb1kjOyvr lvmcache: /dev/md2: VG systemlvm: Set creation host to rescue. Using cached label for /dev/md2 Read systemlvm metadata (19) from /dev/md2 at 39936 size 2632 /dev/md2 0: 0 16: home(0:0) /dev/md2 1: 16 24: var(40:0) /dev/md2 2: 40 40: var(0:0) /dev/md2 3: 80 40: usr(0:0) /dev/md2 4: 120 40: var(80:0) /dev/md2 5: 160 8: tmp(0:0) /dev/md2 6: 168 16: var(64:0) /dev/md2 7: 184 80: var(120:0) /dev/md2 8: 264 64: home(16:0) /dev/md2 9: 328 128: var(200:0) /dev/md2 10: 456 32: home(80:0) /dev/md2 11: 488 440: var(328:0) /dev/md2 12: 928 24: home(112:0) /dev/md2 13: 952 206: NULL(0:0) Found volume group "systemlvm" using metadata type lvm2 Read volume group systemlvm from /etc/lvm/backup/systemlvm Unlocking /lib/init/rw/V_systemlvm Closed /dev/md2 Unlocking /lib/init/rw/P_global ~# vgdisplay --- Volume group --- VG Name systemlvm System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 19 VG Access read/write VG Status resizable MAX LV 0 Cur LV 4 Open LV 4 Max PV 0 Cur PV 1 Act PV 1 VG Size 144,75 GB PE Size 128,00 MB Total PE 1158 Alloc PE / Size 952 / 119,00 GB Free PE / Size 206 / 25,75 GB VG UUID rL8Oq2-dA7o-eRYe-u1or-JA7U-fnb1-kjOyvr ~# pvdisplay --- Physical volume --- PV Name /dev/md2 VG Name systemlvm PV Size 144,77 GB / not usable 16,31 MB Allocatable yes PE Size (KByte) 131072 Total PE 1158 Free PE 206 Allocated PE 952 PV UUID ZSAzP5-iBvr-L7jy-wB8T-AiWz-0g3m-HLK66Y :~# lvdisplay --- Logical volume --- LV Name /dev/systemlvm/home VG Name systemlvm LV UUID YXrfdg-5OSY-DVkN-eiQe-Qksg-CI84-9Z2hx8 LV Write Access read/write LV Status available # open 2 LV Size 17,00 GB Current LE 136 Segments 4 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:2 --- Logical volume --- LV Name /dev/systemlvm/var VG Name systemlvm LV UUID 25N7CR-ZpUM-zR18-NfS6-zeSe-AVnV-T98LuU LV Write Access read/write LV Status available # open 2 LV Size 96,00 GB Current LE 768 Segments 7 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:0 --- Logical volume --- LV Name /dev/systemlvm/usr VG Name systemlvm LV UUID 3TpFXt-LjYG-Ewn7-9IdX-sSCZ-Pl8A-xmqbmQ LV Write Access read/write LV Status available # open 2 LV Size 5,00 GB Current LE 40 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:1 --- Logical volume --- LV Name /dev/systemlvm/tmp VG Name systemlvm LV UUID c5MJ4K-olev-Mjt8-5PPB-rQuR-TkXb-x6NvTi LV Write Access read/write LV Status available # open 2 LV Size 1,00 GB Current LE 8 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 253:3

    Read the article

  • Audio card with built-in ground isolator?

    - by Dave Jarvis
    What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

    Read the article

  • Big Data – Beginning Big Data Series Next Month in 21 Parts

    - by Pinal Dave
    Big Data is the next big thing. There was a time when we used to talk in terms of MB and GB of the data. However, the industry is changing and we are now moving to a conversation where we discuss about data in Petabyte, Exabyte and Zettabyte. It seems that the world is now talking about increased Volume of the data. In simple world we all think that Big Data is nothing but plenty of volume. In reality Big Data is much more than just a huge volume of the data. When talking about the data we need to understand about variety and volume along with volume. Though Big data look like a simple concept, it is extremely complex subject when we attempt to start learning the same. My Journey I have recently presented on Big Data in quite a few organizations and I have received quite a few questions during this roadshow event. I have collected all the questions which I have received and decided to post about them on the blog. In the month of October 2013, on every weekday we will be learning something new about Big Data. Every day I will share a concept/question and in the same blog post we will learn the answer of the same. Big Data – Plenty of Questions I received quite a few questions during my road trip. Here are few of the questions. I want to learn Big Data – where should I start? Do I need to know SQL to learn Big Data? What is Hadoop? There are so many organizations talking about Big Data, and every one has a different approach. How to start with big Data? Do I need to know Java to learn about Big Data? What is different between various NoSQL languages. I will attempt to answer most of the questions during the month long series in the next month. Big Data – Big Subject Big Data is a very big subject and I no way claim that I will be covering every single big data concept in this series. However, I promise that I will be indeed sharing lots of basic concepts which are revolving around Big Data. We will discuss from fundamentals about Big Data and continue further learning about it. I will attempt to cover the concept so simple that many of you might have wondered about it but afraid to ask. Your Role! During this series next month, I need your one help. Please keep on posting questions you might have related to big data as blog post comments and on Facebook Page. I will monitor them closely and will try to answer them as well during this series. Now make sure that you do not miss any single blog post in this series as every blog post will be linked to each other. You can subscribe to my feed or like my Facebook page or subscribe via email (by entering email in the blog post). Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Big Data, PostADay, SQL, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

    Read the article

  • lvm disappeared after disc replacement on raid10

    - by user142295
    here my problem: I am running ubuntu 12.04 on a raid10 (4 disks), on top of which I installed an lvm with two volume groups (one for /, one for /home). The layout of the disks are as follows: Disk /dev/sda: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0003f3b6 Device Boot Start End Blocks Id System /dev/sda1 * 63 481949 240943+ 83 Linux /dev/sda2 481950 2910640634 1455079342+ fd Linux raid autodetect /dev/sda3 2910640635 2930272064 9815715 82 Linux swap / Solaris Disk /dev/sdb: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00069785 Device Boot Start End Blocks Id System /dev/sdb1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdb2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdc: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdc1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdc2 2910158685 2930272064 10056690 82 Linux swap / Solaris Disk /dev/sdd: 1500.3 GB, 1500301910016 bytes 255 heads, 63 sectors/track, 182401 cylinders, total 2930277168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000f14de Device Boot Start End Blocks Id System /dev/sdd1 63 2910158684 1455079311 fd Linux raid autodetect /dev/sdd2 2910158685 2930272064 10056690 82 Linux swap / Solaris The first disk (/dev/sda) contains the /boot partition on /dev/sda1. I use grub2 to boot the system off this partition. On top of this raid10 I installed two volume groups, one for /, one for /home. This system worked well, I even exchanged two disks during the last two years. It always worked. But not this time. For the first time, /dev/sda broke. I do not know if this is an issue – I know I would have struggled anyways to overcome the problem with /boot installed on that disk and grub2 installed on the mbr of /dev/sda. Anyways, I did what I always did: start knoppix fire up the raid sudo mdadm --examine -scan which returns ARRAY /dev/md127 UUID=0dbf4558:1a943464:132783e8:19cdff95 start it up sudo mdadm --assemble /dev/md127 fail the failing disk (smart event) sudo mdadm /dev/md127 --fail /dev/sda2 remove the failing disk sudo mdadm /dev/md127 --remove /dev/sda2 stop the raid sudo mdadm -S /dev/md127 take out the disk replace it with a new one create the same partitions as on the failling one add it to the raid sudo mdadm --assemble /dev/md127 sudo mdadm /dev/md127 --add /dev/sda2 wait 4 hours All looks fine: cat /proc/mdstat returns: Personalities : [raid10] md127 : active raid10 sda2[0] sdd1[3] sdc1[2] sdb1[1] 2910158464 blocks 64K chunks 2 near-copies [4/4] [UUUU] unused devices: <none> and sudo mdadm --detail /dev/md127 returns /dev/md127: Version : 0.90 Creation Time : Wed Jun 10 13:08:46 2009 Raid Level : raid10 Array Size : 2910158464 (2775.34 GiB 2980.00 GB) Used Dev Size : 1455079232 (1387.67 GiB 1490.00 GB) Raid Devices : 4 Total Devices : 4 Preferred Minor : 127 Persistence : Superblock is persistent Update Time : Thu Mar 21 16:27:40 2013 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : near=2 Chunk Size : 64K UUID : 0dbf4558:1a943464:132783e8:19cdff95 (local to host Microknoppix) Events : 0.4824680 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 8 49 3 active sync /dev/sdd1 However, there is no trace of the volume groups. Rebooting into knoppix does not help Restarting the old system (I actually replugged and re-added the failing disk for that – the system begins to start, but then fails to see the / partition – no wonder if the volume group is gone) does not help. sudo vgscan, sudo vgdisplay, sudo lvs, sudo lvdisplay, sudo vgscan –mknodes all returned No volume groups found. I am completely at a loss. Can anyone tell me if and how I can recover my data? Thanks in advance!

    Read the article

  • flex 4: swfloader - how to mute game completly

    - by ufk
    Hiya. Ive read some answers here regarding muting swfloader volume but none of the examples would work in flex 4. I tried doinf the following: this._swfGame.source=url; this._swfGame.soundTransform = new SoundTransform(0.0); this would shut down the volume of the preloader, but when the game starts the volume is back to normal. i tried adding the following to the previous code: this._swfGame.addEventListener(Event.COMPLETE,this._configSwf); private function _configSwf(event:Event):void { this._swfGame.removeEventListener(Event.COMPLETE, _configSwf); var soundTransform:SoundTransform = new SoundTransform(0.0); // TODO: set proper volume this._swfGame.soundTransform = soundTransform; } but i got the same results. any ideas? thanks!

    Read the article

  • availability of Win32_MountPoint and Win32_Volume on Windows XP?

    - by SteveC
    From the MSDN articles I've found -- http://msdn.microsoft.com/en-us/library/aa394515(v=VS.85).aspx -- Win32_Volume and Win32_MountPoint aren't available on Windows XP. However, I'm developing a C# app on Windows XP (64bit), and I can get to those WMI classes just fine. Users of my app will be on Windows XP sp2 with .Net 3.5 sp1. Googling around, I can't determine whether I can count on this or not. Am I successful on my system because of one or more of the following: - windows xp service pack 2? - visual studio 2008 sp1 was installed? - .Net 3.5 sp1? Should I use something other than WMI to get at the volume/mountpoint info? Below is sample code that's working... public static Dictionary<string, NameValueCollection> GetAllVolumeDeviceIDs() { Dictionary<string, NameValueCollection> ret = new Dictionary<string, NameValueCollection>(); // retrieve information from Win32_Volume try { using (ManagementClass volClass = new ManagementClass("Win32_Volume")) { using (ManagementObjectCollection mocVols = volClass.GetInstances()) { // iterate over every volume foreach (ManagementObject moVol in mocVols) { // get the volume's device ID (will be key into our dictionary) string devId = moVol.GetPropertyValue("DeviceID").ToString(); ret.Add(devId, new NameValueCollection()); //Console.WriteLine("Vol: {0}", devId); // for each non-null property on the Volume, add it to our NameValueCollection foreach (PropertyData p in moVol.Properties) { if (p.Value == null) continue; ret[devId].Add(p.Name, p.Value.ToString()); //Console.WriteLine("\t{0}: {1}", p.Name, p.Value); } // find the mountpoints of this volume using (ManagementObjectCollection mocMPs = moVol.GetRelationships("Win32_MountPoint")) { foreach (ManagementObject moMP in mocMPs) { // only care about adding directory // Directory prop will be something like "Win32_Directory.Name=\"C:\\\\\"" string dir = moMP["Directory"].ToString(); // find opening/closing quotes in order to get the substring we want int first = dir.IndexOf('"') + 1; int last = dir.LastIndexOf('"'); string dirSubstr = dir.Substring(first , last - first); // use GetFullPath to normalize/unescape any extra backslashes string fullpath = Path.GetFullPath(dirSubstr); ret[devId].Add(MOUNTPOINT_DIRS_KEY, fullpath); } } } } } } catch (Exception ex) { Console.WriteLine("Problem retrieving Volume information from WMI. {0} - \n{1}",ex.Message,ex.StackTrace); return ret; } return ret; }

    Read the article

  • Gluster strange issue with shared mount point like seprate mount.

    - by Satish
    I have two nodes and for experiment i have install glusterfs and create volume and successfully mounted on own node, but if i create file in node1 it is not showing in node2, look like both behaving like they are separate. node1 10.101.140.10:/nova-gluster-vol 2.0G 820M 1.2G 41% /mnt node2 10.101.140.10:/nova-gluster-vol 2.0G 33M 2.0G 2% /mnt volume info split brian $ sudo gluster volume heal nova-gluster-vol info split-brain Gathering Heal info on volume nova-gluster-vol has been successful Brick 10.101.140.10:/brick1/sdb Number of entries: 0 Brick 10.101.140.20:/brick1/sdb Number of entries: 0 test node1 $ echo "TEST" > /mnt/node1 $ ls -l /mnt/node1 -rw-r--r-- 1 root root 5 Oct 27 17:47 /mnt/node1 node2 (file isn't there, while they are shared mount) $ ls -l /mnt/node1 ls: cannot access /mnt/node1: No such file or directory What i am missing??

    Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >