Search Results

Search found 6045 results on 242 pages for 'vyren media'.

Page 28/242 | < Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >

• Xbox360 Universal Media Remote - out of sync?

  - by Traveling Tech Guy

  Hi, I have the Universal Media Remote from Microsoft, which was included with my HD-DVD package. I've been using it for over a year to watch videos/DVDs on my Xbox360 and it saved me the hassle of navigating with the game controller (which turns itself off every 5 minutes).All of a sudden (it didn't fall or suffer any severe trauma), it does not communicate with the Xbox anymore: it is on, I replaced batteries several times, but the Xbox does not respond to commands. The TV does - volume, channels, etc. - but I need the Xbox functionality.As far as I can see, there's no way to sync the remote with the Xbox - it lacks that small sync button that the game controllers have.I called Microsoft Support and spoke for an hour to someone who, I guess didn't know what to do at all. Bottom line - since it's been over a year, they won't fix/replace it - I have to get a new one.Before I do (if I do), I need to know if there's anything I can do with the existing remote, and will I have the same problem with a new one (i.e. the problem is with the Xbox itself)? Thanks!

  Read the article

• Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

  - by Kairan

  Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

  Read the article

• Custom flash uploader breaks only on Media Temple

  - by LaserWolf

  I've built a flash uploader to upload files up to 100MB using a php backend. It works wonderfully on our dev server, on a hostgator vps, and on one of our clients' servers running Debian. It will not work on our Media Temple (dv)3.5 and I don't know why. The upload will start but will choke after a few seconds with this flash error message: ioerror: [IOErrorEvent type="ioError" bubbles=false cancelable=false eventPhase=2 text="Error #2038: File I/O Error. URL: http://..._upload.php"] The problem seems to be specific to the asynchronous nature of the flash uploader because if I try a straight php upload it works fine. The php.ini settings are set to allow such a large upload as well. Also, I've thoroughly googled flash, 2038, I/O error, etc but have yet to find anything that helped. Here's the weird part though: We work in Seattle. It won't work from the office. It won't work from home. But, while on the phone with MT's support, they were able to upload a file through our flash uploader just fine. I'm not sure where his office was located but I think it was Atlanta. So the problem also seems specific to physical location. Has anyone run into this sort of problem before?

  Read the article

• Better approach to archiving large amounts of original video footage using optical media (DVD/Blu-ra

  - by Rob

  This question is to share my experience as well as ask for suggestions for better methods. Along with 2 friends, I completed the making of a short documentary film in 2006. Clip is at: http://www.youtube.com/mediamotioninvision The film was edited in Adobe Premiere Pro 1.5 on Windows XP. More details and screenshot here: http://www.flickr.com/photos/smilingrobbie/1350235514/ ( note this is not intended to be a plug, we've moved on from this initial learning curve project ;) ) The film is in 4:3 standard definition 720x576 PAL format. As well as retaining the final 30minute film, I wanted to keep all original files that assembled together to make the film. The footage was 83.5Gb So I archived them to over 20 4.7Gb DVD recordables in the original .avi format (i.e. data DVD-ROM format, NOT DVD-Video Mpeg2) Some .avi DV video files were larger than 4.7Gb so I used 7-zip to split them ( here is a guide as to how to do that: http://www.linglom.com/2008/10/12/how-to-split-a-large-file-using-7-zip/ ) To recombine them, a dos shell command like this would do that: copy /b file.avi.* file.avi would do the job, where .* is a wild card to include all the split parts e.g. 001, 002...00n assuming they are all in the same directory path folder. file.avi is the recombined file identical to the original. Later on, I bought a LG BE06 LU10 USB 2.0 Super-multi Blu-ray burner and archived the footage to 2 (two) x 50Gb BD-R DL discs. Again in the original format, written as files to a BD-R in the BD-R BD-ROM UDF format readable by PC/Mac etc, NOT Blu-ray video/film format. This seems to be a good solution for me, because: the archive is in a robust, reasonably permanent, non-volatile medium, i.e. DVD recordable / Blu-ray (debates about stability of optical media organic chemical dye compounds/substrates aside) the format of the archive is accessible by open source tools or just plain Windows Explorer and it's not in a proprietary format I just thought I'd ask folks for their experience on better methods, if such exist.

  Read the article

• Multi-WAN bonding across different media

  - by Tom O'Connor

  I've recently been thinking again about a product that Viprinet provide, basically they've got a pair of routers, one that lives in a datacentre, Their VPN Multichannel Hub and the on-site hardware, their VPN multichannel routers They've also got a bunch of interface cards (like HWICs) for 3G, UMTS, Ethernet, ADSL and ISDN adapters. Their main spiel seems to be bonding across different media. It's something that I'd really like to use for a couple of projects, but their pricing is really quite extreme, the hub is about 1-2k, the routers are 2-6k, and the interface modules are 200-600 each. So, what I'd like to know is, is it possible with a couple of stock Cisco routers, 28xx or 18xx series, to do something similar, and basically connect a bunch of different WAN ports, but have it all presented neatly as one channel back to the internet, with seamless (or nearly) failover if one of the WAN interfaces should fail. Basically, If i got 3x 3G to ethernet modems, and each on a different network, I'd like to be able to loadbalance/bond across all of them, without having to pay Viprinet for the privilege. Does anyone know how I'd go about configuring something for myself, based around standard protocols (or vendor specific ones), but without actually having to buy the Viprinet hardware?

  Read the article

• Windows media scaling/interpolation method

  - by MichaelH

  Usually in Windows, if videos or other media is upscaled from a certain resolution to a higher resolution (e.g. "monitor size"), a bilinear filtering algorithm or similar is used, such that the upscaled material doesn't look blocky. On my system however, the used interpolation algorithm changed from 'bilinear' to 'nearest neighbor' at some point, with the effect that upscaled videos (e.g. viewed in MPC or WMP, and also Skype video streams) and games (e.g. from PopCap) appear rather blocky. Not sure what the common factor between those is, could be DirectShow(?). I am not aware of having changed any setting that could have affected this state, in fact I am not even aware such a setting exists. I'm guesing that some installed software must have changed something on my computer. My computer is running Windows 7, but I had already experienced the same effect on an XP machine some while ago, where it changed back again to the more pleasing bilinear interpolation after a while, as magically as the first time. What could be wrong with this installation, and how can I change this upscaling interpolation behavior?

  Read the article

• map linux drives to windwos 7 for media stream over internet

  - by Ortix92

  I'm trying to map a linux network drive to my windows 7 laptop, however this laptop is not on LAN. At home, I simply use Samba, but this obviously won't work over the internet. I'm trying to avoid VPN, so if there are other solutions, I would like to know about them. The reason I ask is because my university does this as well. We can simply map folders to our computers without VPN connections. I'm not sure what they are running as servers. The main reason is because I want to be able to access my files stored on my home server wherever I go. They are located in the /home/ folder (videos, music and pictures folder). I'm trying to keep my websites and media separate from each other. I wouldn't mind accessing them from a web interface either, but I would like to keep the directory structure intact. I remember having an app like that come with winamp and running it on my windows pc (As the server). Unfortunately it doesn't work for linux. Any ideas on what I could use? Would XBMC be able to help me out with this? I did do some researching but I couldn't find any concrete answers

  Read the article

• Disk Error on Boot (Possible boot sector issue)

  - by Choco

  I own a 4-5 year old Dell Dimension E510 with Windows XP: Media Center Edition. I have 2 drives installed: C Drive: Windows XP: Media Center Edition G Drive: 2 partitions: Windows 7 (beta) Windows XP (professional) That is also the order they are connected. The C Drive is my primary drive. When I attempt to boot the computer, the bios loading screen appears normally; the progress bar moves and it's fine. The very next page, however, supposed to be a boot choice. When I installed Windows 7 onto the G Drive in context of the C drive it added a boot selector to the C drive's boot sequence. It gives me the option of booting Windows 7 or Windows XP: Media Center Edition. However, my problem is now this: After the bios screen I previously mentioned, instead of a boot selector, I receive the following error: A disk read error occurred. Press CTRL+ALT+DEL to restart. The drive is spinning up normally. I hear no odd noises/clicks/scraping coming from it, even after disabling the other drive to listen to it carefully. According to me, it's a boot sector issue. I have never experienced this before, but maybe during a recent shutdown, Windows XP: MCE errored out and ruined the boot sector. Dilemma! I don't have the Windows XP: MCE disc, because it was installed by the factory. I have accessed the hidden partition on the drive before (you hit a key combination on the bios screen and it comes up with an interface to fix your drive). However, I don't want to reformat the drive (which is what the interface gives me the option to do). I want to possibly fix the boot sector. How can I achieve that?

  Read the article

• This .mpg video clip doesn't play well

  - by Roey

  I've installed K-lite mega codec pack v6.9.0 with playback essentials without player. My default and only media player is windows media player. here are the clip's media info: General Complete name : D:\Users\Roey\Downloads\B384MV.mpg Format : MPEG-PS File size : 273 MiB Duration : 4mn 59s Overall bit rate : 7 643 Kbps Video ID : 224 (0xE0) Format : MPEG Video Format version : Version 2 Format profile : Main@High Format settings, BVOP : No Format settings, Matrix : Default Format settings, GOP : M=1, N=15 Duration : 4mn 57s Bit rate mode : Variable Bit rate : 7 363 Kbps Nominal bit rate : 9 000 Kbps Width : 1 920 pixels Height : 1 080 pixels Display aspect ratio : 16:9 Frame rate : 25.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Compression mode : Lossy Bits/(Pixel*Frame) : 0.142 Stream size : 261 MiB (96%) Audio ID : 192 (0xC0) Format : MPEG Audio Format version : Version 1 Format profile : Layer 3 Mode : Joint stereo Duration : 4mn 59s Bit rate mode : Constant Bit rate : 128 Kbps Channel(s) : 2 channels Sampling rate : 44.1 KHz Compression mode : Lossy Stream size : 4.56 MiB (2%) Menu When I play it there is no sound (just a little "kahhhh" noise every 10-20 seconds) and the frames are moving very slow - it "jumps" frames. A blue tray icon [FFa] "ffdshow audio decoder" pops with the following details: Input:MP3, stereo, 44100 Hz (libavocodec) Output:PCM, stereo, 44100 Hz, 16-bit integer Any help will be much appreciated. Thanks

  Read the article

• Synergy 1.4.2 Linux server, OSX client, Media/Function key mapping issues

  - by at165dB

  I'm using an Apple bluetooth keybord to control my Linux synergy server. SSH tunneling, Mouse, Keyboard, and Copy&Paste all work. Linux sees all the media/app keys that are on top of the F# keys correctly. However if I press any of those keys while controlling my OSX client, nothing happens on the client. Running synergys with -d DEBUG1 I can see the following keycode info: Pressing the "dim monitor" key that also serves as F1 generates: new mask: 0x2000 event: KeyPress code=232, state=0x0010 new mask: 0x2000 If I press "fn" and the same key, I can see it sending what I'm assuming is an F1: event: KeyPress code=67, state=0x0010 onKeyDown id=61374 mask=0x2000 button=0x0043 send key down to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 new mask: 0x2000 event: KeyRelease code=67, state=0x0010 onKeyUp id=61374 mask=0x2000 button=0x0043 send key up to "foo.cisco.com" id=61374, mask=0x2000, button=0x0043 I'm guessing I need to tweak my synergy.conf so that the server sends keys that it currently isn't. I'm also not sure what I need to do to tweak the keys that it is sending, but are not working. Below are all the other keys I'm having issues with. Does anyone have any idea how I can enable their functionality? brighten monitor: new mask: 0x2000 event: KeyPress code=233, state=0x0010 new mask: 0x2000 expose: new mask: 0x2000 event: KeyPress code=128, state=0x0010 new mask: 0x2000 dashboard: new mask: 0x2000 event: KeyPress code=212, state=0x0010 new mask: 0x2000 dim keyboard: new mask: 0x2000 event: KeyPress code=237, state=0x0010 new mask: 0x2000 brighten keyboard: new mask: 0x2000 event: KeyPress code=238, state=0x0010 new mask: 0x2000 rewind: event: KeyPress code=173, state=0x0010 onKeyDown id=57521 mask=0x2000 button=0x00ad send key down to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad new mask: 0x2000 event: KeyRelease code=173, state=0x0010 onKeyUp id=57521 mask=0x2000 button=0x00ad send key up to "foo.cisco.com" id=57521, mask=0x2000, button=0x00ad play/pause: event: KeyPress code=172, state=0x0010 onKeyDown id=57523 mask=0x2000 button=0x00ac send key down to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac new mask: 0x2000 event: KeyRelease code=172, state=0x0010 onKeyUp id=57523 mask=0x2000 button=0x00ac send key up to "foo.cisco.com" id=57523, mask=0x2000, button=0x00ac fastforward: event: KeyPress code=171, state=0x0010 onKeyDown id=57520 mask=0x2000 button=0x00ab send key down to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab new mask: 0x2000 event: KeyRelease code=171, state=0x0010 onKeyUp id=57520 mask=0x2000 button=0x00ab send key up to "foo.cisco.com" id=57520, mask=0x2000, button=0x00ab mute: event: KeyPress code=121, state=0x0010 onKeyDown id=57517 mask=0x2000 button=0x0079 send key down to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 new mask: 0x2000 event: KeyRelease code=121, state=0x0010 onKeyUp id=57517 mask=0x2000 button=0x0079 send key up to "foo.cisco.com" id=57517, mask=0x2000, button=0x0079 volume down: onKeyDown id=57518 mask=0x2000 button=0x007a send key down to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a new mask: 0x2000 event: KeyRelease code=122, state=0x0010 onKeyUp id=57518 mask=0x2000 button=0x007a send key up to "foo.cisco.com" id=57518, mask=0x2000, button=0x007a volume up: event: KeyPress code=123, state=0x0010 onKeyDown id=57519 mask=0x2000 button=0x007b send key down to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b new mask: 0x2000 event: KeyRelease code=123, state=0x0010 onKeyUp id=57519 mask=0x2000 button=0x007b send key up to "foo.cisco.com" id=57519, mask=0x2000, button=0x007b eject: event: KeyPress code=169, state=0x0010 onKeyDown id=57345 mask=0x2000 button=0x00a9 send key down to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9 new mask: 0x2000 event: KeyRelease code=169, state=0x0010 onKeyUp id=57345 mask=0x2000 button=0x00a9 send key up to "foo.cisco.com" id=57345, mask=0x2000, button=0x00a9

  Read the article

• Device driver with generic communication media layer

  - by Tom

  Greetings all, I'm trying to implement driver for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our head office. Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Cheers, Tom

  Read the article

• Aero Glass Buttons Like Windows Media Player?

  - by Tanner

  Hi everybody, I am making making a program and I want to have a Aero Glass set of controls just like Windows Media Player, I found this: http://blogs.msdn.com/b/tims/archive/2006/04/18/578637.aspx but it just draws black. I also found a control that had the media player controls built in right ton the glass but it was no good it didn't want to render right and made different parts of my program not work. Any controls, or ways to extend the Aero glass so I can at least add my own buttons would be greatly appreciated. Thanks :) BTW C# only. :)

  Read the article

• How to get the playing file total time duration Media player

  - by Geetha

  Hi All, I use media player control to play mp3 files in asp.net application. I want to find When the playing process gets end and the total time require to finish the file using javascript. Code: <object id="mediaPlayer" classid="clsid:22D6F312-B0F6-11D0-94AB-0080C74C7E95" codebase="http://activex.microsoft.com/activex/controls/mplayer/en/nsmp2inf.cab#Version=5,1,52,701" height="1" standby="Loading Microsoft Windows Media Player components..." type="application/x-oleobject" width="1"> <param name="fileName" value="" /> <param name="animationatStart" value="true" /> <param name="transparentatStart" value="true" /> <param name="autoStart" value="true" /> <param name="showControls" value="true" /> <param name="volume" value="100" /> <param name="loop" value="true" /> </object> Geetha.

  Read the article

• Joomla 1.5 Media Manager sets incorrect file permissions when uploading

  - by Scott Mayfield

  Howdy all, I have a Joomla 1.5 installation running on Windows Server 2008, installed via the Web Platform Installer. When uploading images with the media manager (native uploader, not the flash bulk uploader), the files arrive on the server correctly, but are given incorrect permissions. Specifically, the IIS_IUSRS group is not given access to the file. I might be incorrect about what group/user is SUPPOSED to get access to the files, but so far, I've found that unless I give IIS_IUSRS access to the uploaded files, they won't appear on the site or in the media manager (appear as broken images). Once I give IIS_IUSRS permission to the files, they work fine. So far, all the research I've done has led me to linux specific fixes that involve either changing the umask on the server, or directly modifying the Joomla codebase to add an appropriate chmod command to the upload process, but I really don't want to modify Joomla directly. I have to believe there's a setting here somewhere that will do the job, either on the Joomla or Windows side of the equation. Any thoughts? Scott

  Read the article

• Invoking browser on streaming media URLs

  - by Maven

  I have a dirt simple little function that launches the blackberry browser on a streaming media file in order to launch the built in media player. Everything works fine but there is this annoying dialog every time from the browser asking me if I want to save or open the file. My answer is always "open" the file so is there a way I can make it default and not bring up the dialog each time? The code I'm using to launch the browser // Get the default sessionBrowserSession browserSession = Browser.getDefaultSession(); // now launch the URL browserSession.displayPage(url); This is on blackberry OS 5.0 Thanks!

  Read the article

• Middleware with generic communication media layer

  - by Tom

  Greetings all, I'm trying to implement middleware (driver) for an embedded device with generic communication media layer. Not sure what is the best way to do it so I'm seeking an advice from more experienced stackoverflow users:). Basically we've got devices around the country communicating with our servers (or a pda/laptop in used in field). Usual form of communication is over TCP/IP, but could be also using usb, RF dongle, IR, etc. The plan is to have object corresponding with each of these devices, handling the proprietary protocol on one side and requests/responses from other internal systems on the other. The thing is how create something generic in between the media and the handling objects. I had a play around with the TCP dispatcher using boost.asio but trying to create something generic seems like a nightmare :). Anybody tried to do something like that? What is the best way how to do it? Example: Device connects to our Linux server. New middleware instance is created (on the server) which announces itself to one of the running services (details are not important). The service is responsible for making sure that device's time is synchronized. So it asks the middleware what is the device's time, driver translates it to device language (protocol) and sends the message, device responses and driver again translates it for the service. This might seem as a bit overkill for such a simple request but imagine there are more complex requests which the driver must translate, also there are several versions of the device which use different protocol, etc. but would use the same time sync service. The goal is to abstract the devices through the drivers to be able to use the same service to communicate with them. Another example: we find out that the remote communications with the device are down. So we send somebody out with PDA, he connects to the device using USB cable. Starts up the application which has the same functionality as the timesync service. Again middleware instance is created (on the PDA) to translate communication between application and the device this time only using USB/serial media not TCP/IP as in previous example. I hope it makes more sense now :) Cheers, Tom

  Read the article

• How to capture actions taken on Windows Media Player

  - by bluenile

  Hi, I want to programmtically detect the state of movie currently being played in Windows Media Player. i..e if the movie is maximized I need to find that it is maximized and put the word "MAXIMIZED" in text file, if the movie is paused I need to capture PAUSED in text file, if movie is stopped I need to capture STOPPED in text file. The capturing needs to happen in the background i.e. totally transparent to end user as the user takes action while watching the movie on Windows Media player I am planning to achieve this using Visual Basic 6.0 Kindly provide me inputs / pointers on how to go about this. Thanks

  Read the article

• Umbraco -- controlling access to media by membership

  - by Ryan

  I need to set up access to media files with the following structure: A media folder is designated as belonging to a specific member group. Then, a sub-folder below that needs to be available to a subset of members from the parent's member group. Any thoughts on how this can best be accomplished? I'll render the actual file download links with a user control, but how should I set up this access control on the back end? I need a member-group picker and a multiple member picker. Do these exist anywhere?

  Read the article

• How to generate a PDF from a view using media=print for styles

  - by Riderman de Sousa Barbosa

  Most of the questions in stackoverflow or in other forums, show how to generate views and sends them by email. But my goal is to generate a PDF from a view with the media=print format and sends it in attachment by email. I have a view that displays a report. I use CSS Print to display this report in a print format. (Basically I display some elements and hide others). How can I generate a PDF from this view (with format media=print) and send it by e-mail in attachment. I am using ActionMailer to send emails and iTextSharp to generate PDFs

  Read the article

• C# public partial struct methods for more System.Windows.Media.Color

  - by dr d b karron

  How can I put in additional methods for manipulating color ? Best would be to overload the struct System.Windows.Media.Color. It is NOT a class (in c#). Now i'm tinkering with putting (in the same file for testing or must i put it in a different file) an namespace (Silverlight Application36 or System.Windows.Media ?) and a partial struct Color Normalize (double R, ...). I should see MyColor.Normalize() start being recognized by intellisense ? I'm not. I'm looking to put in a suite of overloaded color manipulations using floating and double numbers instead of unsigned byte integers. Any hints while I wack at it ? Cheers! dr.K

  Read the article

• Invoking browser on steaming media URLs

  - by Maven

  I have a dirt simple little function that launches the blackberry browser on a streaming media file in order to launch the built in media player. Everything works fine but there is this annoying dialog every time from the browser asking me if I want to save or open the file. My answer is always "open" the file so is there a way I can make it default and not bring up the dialog each time? The code I'm using to launch the browser // Get the default sessionBrowserSession browserSession = Browser.getDefaultSession(); // now launch the URL browserSession.displayPage(url); This is on blackberry OS 5.0 Thanks!

  Read the article

• Can html 5 serve real time media stream?

  - by user198729

  I've heard of many interesting features of html 5, but is it able to serve real time media stream from web camera?

  Read the article

• Is there any way to access media Folder in iPhone , iPad

  - by Rohan

  Hi All, For my app, i need to access Media folder, Is it possible, if yes it would be great if someone can share one sample code

  Read the article

• Social Media Aggregator, Global Update via Powershell

  - by deanjmiller

  Does anyone know of a way to interface with a Social Media Aggregator using Powershell. For Instance, I would like to update my global status on digsby using Powershell. Digsby would then fan the message out to Facebook, Myspace, Twitter, Etc.. I am open to using any Social Media Aggregator that can do this.. Digsby, Seesmic, Ping.fm TweetDeek, etc.. If any of these programs have a com interface or something like it I'm sure who ever implements this first will have a large gain in users.

  Read the article

• Social Shopping

  - by David Dorf

  I've written about various breeds of social shopping in the past, so I decided to give some thought into a categorization with examples. Below I've listed the different types of social shopping I've observed and some companies that support them. Comments and Ratings -- Commenting on products has been around almost as long as e-commerce. Two popular players in this space are BazaarVoice and PowerReviews. Most shoppers prefer relying on peer reviews rather than retailer descriptions, so the influence over sales is very strong. f-commerce -- A new term that was sure to rear its ugly head when retailers started allowing shopping on Facebook, And its all Elastic Path and Alvenda's fault! Co-shopping -- Retailers like Wet Seal are enabling multiple people to shop together online. This is particularly applicable to fashion, where the real-time exchange of opinions is important. I actually tried this with a co-worker and its pretty cool. Bragging -- Blippy is Twitter for shoppers, allowing purchases to be "tweeted" so you can keep up with your friends. I get alerted when friends download music or apps from iTunes because chances are I'll be interested as well. This covert influence is one-up'ed by Snatter, a service that gives people discounts for tweeting or posting promotions from retailers. This is the petri dish of viral marketing. Advice -- Combine the bragging of Blippy and the opinions from BazaarVoice and you'd get ShopSocially, a social network dedicated to spreading product knowledge amongst informed shoppers. I'm sure if I gave it more thought, a few more types would come to mind, but I've got to get back to work. Now is not the time to be blogging at Oracle!

  Read the article

< Previous Page | 24 25 26 27 28 29 30 31 32 33 34 35  | Next Page >