Search Results

Search found 11621 results on 465 pages for 'html5 video'.

Page 282/465 | < Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >

  • On a dual-GPU laptop, is using the discrete GPU ever more power efficient?

    - by Mahmoud Al-Qudsi
    Given a laptop with a dual integrated/discrete GPU configuration, is it ever more power efficient to use the discrete GPU instead of the integrated? Obviously when writing an email or working on a spreadsheet, the integrated GPU will always use less power. But let's say you're doing something graphics-medium but not graphics-intensive/heavy - is there a point where it actually makes sense to fire up the discrete GPU, not for performance but for power-saving reasons? Off the top of my head, I can think of a scenario where the external GPU supports hardware decoding of a particular video codec - I'd imagine there is a "price point" where using the GPU saves more energy than decoding that fully in software would. But I think most GPUs, integrated or discrete, pretty much decode just the plain-Jane h264. But maybe there is something more complicated, perhaps if you're doing something like desktop/windowing animations or a flash animation on a website (not an embedded flash video) - maybe the discrete GPU will use enough less power to make up for switching to it? I guess this question can be summed up as to whether or not you can say beyond doubt that if you don't care for performance on a laptop with two GPUs, always use the integrated GPU for maximum battery life.

    Read the article

  • 4.00gb (3.25gb usable) in Windows 7 x64

    - by dotnetdev
    Hi, I have setup Windows 7 Ultimate x64 on my PC. I have 4gb RAM and my BIOS states the correct amount (4096mb), but I cannot Windows (System Manager) says I have 4.00gb (3.25gb usable). This seems to be a popular issue, and I have looked for an integrated video card (integrated with my chipset) to disable but haven't found anything. What else can be preventing me from seeing all 4gb? When I had Vista 32bit, it would say 3.25gb RAM not 4.00gb (3.25gb usable). I have an x64 CPU and when I brought my RAM, I used a compatibility tool from Crucial (the memory vendor) to test how much memory my PC can support and 4gb was the answer (this was a windows app I think). Chipset is Intel(R) G33/G31/P35/P31 Express Chipset PCI Express In the bios, I looked for an onboard video card (integrated) and there was no such thing, but a couple of other onboard devices. There are also no "Resource Mappings" settings. FURHTER DETAILS: Chipset North Bridge: Intel Bearlake G33 South Bridge: Intel 82801IR ICH9R Maximum Memory Amount 8 GB Graphics Controller Type Intel GMA 3100 (Enabled) I guess the first thing is, how do I disable the graphics controller? EDIT: This thread (http://forums.legitreviews.com/about23417.html) indicates the issue is with memory mapped devices, but someone on this thread says that does not apply to x64. The rest of the comments points to a mobo issue for the guy who started that thread. Thanks

    Read the article

  • S5000XVN Intel Motherboard - Only sees 12 out of 16GB of RAM

    - by Richie086
    So I have an older Intel S5000XVN motherboard, here are the specs CPU Arch : 2 CPU - 2 Cores - 2 Threads CPU PSN : Intel Xeon CPU 5160 @ 3.00GHz CPU EXT : MMX, SSE (1, 2, 3, 3S), EM64T, VT-x CPUID : 6.F.6 / Extended : 6.F CPU Cache : L1 : 2 x 32 / 2 x 32 KB - L2 : 4096 KB Core : Woodcrest (65 nm) / Stepping : B2 Freq : 2985.21 MHz (331.69 * 9) MB Brand : Intel MB Model : S5000XVN NB : Intel 5000X rev 31 SB : Intel 6321ESB rev 09 RAM : 16384 MB FB-DDR2 RAM Speed : 331.7 MHz (1:1) @ N/A Slot 1 : 2048MB (5300) Slot 1 Manufacturer : Kingston Slot 2 : 2048MB (5300) Slot 2 Manufacturer : Qimonda Slot 3 : 2048MB (5300) Slot 3 Manufacturer : Kingston Slot 4 : 2048MB (5300) Slot 4 Manufacturer : Qimonda Slot 5 : 2048MB (5300) Slot 5 Manufacturer : Kingston Slot 6 : 2048MB (5300) Slot 6 Manufacturer : Qimonda As you can clearly see, CPU-Z says I have 16GB of PC2-5300 RAM installed. For some reason in both BIOS and in Windows the maximum usable RAM is 12GB instead of 16GB. I have a dedicated video card connnected, so it can't be stealing RAM to use for the GPU (the S5000XVN does not have any onboard video). I am running Windows Server 2008 R2 x64 as the primary OS - so there should not be a memory limitation imposed on me from the OS. Has anyone experienced this before? Any ideas on how I can actually use all 16GB of RAM? I plan on using this machine to use for a Hyper-V server and have x2 Quad Core Xeon CPUs on the way as I write this post.

    Read the article

  • Completely automated DVD insert-rip-compress-eject workflow

    - by Kevin L.
    (Partially inspired by this question.) Background: I have a PC hidden away behind an HD LCD in custom-built entertainment center. The only visible part of the PC is an external DVD drive, mounted above the Wii. The PC happens to have Windows XP on it; Hackintoshing and Linux might be possible, but I've had issues with drivers for the sound card before. Let's just assume that OS X and Linux are a no-go unless they provide a truly awesome and simple solution for this particular problem. Goal: I would like to have a completely automated workflow for ripping DVDs. Something like this: Push the eject button on the DVD drive, insert the DVD. PC recognizes that this is a video DVD (as opposed to data). PC rips DVD to hard drive. PC finishes ripping, and ejects the DVD tray. PC compresses DVD image into some format that an Xbox 360 can read. PC copies finished compressed video file to a particular folder, so that it can be read into a WMP11 library and seamlessly played by the Xbox 360. PC cleans up all temporary files. Done. The impetus to have this be completely automated is that I’ll never need to switch the TV to the PC’s input and fiddle with the wireless keyboard. That’s just needless user intervention. The UI doesn’t have to be pretty. Nor do I care about speed. And I can probably bridge several of the gaps with some creative Perl use. But it seems likely that many (or all) of the parts should already exist. Any thoughts?

    Read the article

  • Google Chrome doesn't respond user actions correctly

    - by Carlos A. Junior
    Recently I've changed my OS to Ubuntu 12.04 (Cinnamon, 64 bits) from Mint 13 (KDE, 64 bits) and one same bug still appears on new installation. The Google Chrome it seems that don't refresh (repaint) page based on my interactions. Example: When i'm try comment an Youtube vídeo, when i click on textarea, o cursor don't appear inside of textarea, BUT, when/if i change to another tab and return the cursor appears...OK... If i start write some text...according i'm typing the chars don't appers...again if i change to another tab and return the typed text appears on textarea. Other cases that this bug appears: Modal boxes link...don't show the modal; Forms inside modal boxes don't show typed chars; The common Discus comment plugin don't work when focused; I don't have any idea of reason of this bug. (video driver, window manager, Chrome bug ?, i don't know) Any idea to solve this ? Additional informations: Google Chrome 22.0.1229.79 (Official Build 158531) OS Linux WebKit 537.4 (@129177) JavaScript V8 3.12.19.11 Flash 11.3.31.331 User Agent Mozilla/5.0 (X11; Linux i686) AppleWebKit/537.4 (KHTML, like Gecko) Chrome/22.0.1229.79 Safari/537.4 Command Line /opt/google/chrome/google-chrome --flag-switches-begin --flag-switches-end Executable Path /opt/google/chrome/google-chrome Profile Path /home/carlos/.config/google-chrome/Default Kernel version: 3.2.0-31-generic-pae Ubuntu 12.04 Best regards.

    Read the article

  • rsync over ssh backup failing after relocation of server

    - by OlduvaiHand
    I've got two FreeBSD machines set up; one serves video data and the other is the backup for the first. At this point I've got around 4TB of data. I add files to the video server a few at a time, and was planning to use rsync over ssh to keep the backup machine up to date. I did the initial, large backup with both machines hooked up to the same subnet at the lab with no problems using rsync. Then, when I moved the backup machine off-site (but still on the university network), I attempted a sync without changing anything other than the IP (as the machine is now on a different subnet) and got the following error: 2010/03/22 15:55:21 [1260] rsync: connection unexpectedly closed (6340840244 bytes received so far) [receiver] 2010/03/22 15:55:21 [1260] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [receiver=3.0.7] 2010/03/22 15:55:21 [1258] rsync: connection unexpectedly closed (60 bytes received so far) [generator] 2010/03/22 15:55:21 [1258] rsync error: unexplained error (code 255) at io.c(601) [generator=3.0.7] The script that handles the backup hasn't been changed, nor has the crontab that invokes it. Does anyone have any ideas about what might be causing the hiccup? I was under the impression that it might have something to do with the ssh connection timing out or something along those lines, but am not entirely clear on how to diagnose the cause of the problem.

    Read the article

  • Getting the most out of a Mac mini as a media center

    - by celebritarian
    Hello! I own an old Mac mini from 2006 (maybe early 2007). It's got an Intel Core Solo 32-bits CPU and 512 MB RAM. 160 GB HDD. The GPU is an integrated chip… Currently, my Mini is sitting under my LCD TV (720p). It's plugged in via a DVI to HDMI cable. It's currently running Leopard. And unfortunately, Snow Leopard can't be installed on a device with less than 1 GB of RAM… So, my Mac mini isn't exactly powerful. Also, it's slow and Mac OS X is not a pleasant experience on my Mini right now. It feels slow and heavy. I want to use my Mac mini as a media center/player. I want to be able to play video files in 720p (H.264, Matroska/MOV files). So basically, playing high-def videos is all I want to do with my Mini. What OS should I install? Stick to OS X? Optimize for video playback? Or should I install another OS — like Win XP, Ubuntu or any other Linux dist? Then, will my Mini be able to play 720p videos smoothly, even though the CPU and GPU aren't that powerful and with the limit of 512 MB of RAM? Appreciate all help. Thanks in advance!

    Read the article

  • ffmpeg rotate mp4 90º

    - by shox
    Hi, can I rotate(+save / reencode) a .mp4 with ffmpeg? The only thing I found was on the mailinglist saying -vfilters "rotate=90" but ffmpeg says no vfilters. Tried -vf, it says there is no rotate. If I try to do it in VLC it simply does not rotate and kills the audio (did the vlc encoding EVER work? Every single freakin video I throw at it gets fu****d up in some way -_- ) I'm on a MAC and don't have iWork. Any ideas? Thanks FFmpeg version git-svn-r23607, Copyright (c) 2000-2010 the FFmpeg developers built on Jun 14 2010 23:52:55 with gcc 4.2.1 (Apple Inc. build 5659) configuration: libavutil 50.19. 0 / 50.19. 0 libavcodec 52.76. 0 / 52.76. 0 libavformat 52.68. 0 / 52.68. 0 libavdevice 52. 2. 0 / 52. 2. 0 libavfilter 1.20. 0 / 1.20. 0 libswscale 0.11. 0 / 0.11. 0 Hyper fast Audio and Video encoder

    Read the article

  • DIR $file "File Not Found" vs DIR $filedir shows it....not permissions, not USB

    - by Kev
    I was having this problem before on a USB drive, but now it's happening on my main RAID5-backed hard disk: 2013-10-17 9:37 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel*" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs 2003-09-09 11:29 PM 1,056,768 Manuel d'intervention d'urgence MFC.doc 2004-06-20 10:36 PM 139,849 Manuel d'intervention d'urgence MFC.pdf 2 File(s) 1,196,617 bytes 0 Dir(s) 196,068,691,968 bytes free 2013-10-17 9:38 C:\>dir "C:\Shares\Shared\Reference\Safety Management System\Vid eo CD\AutoPlay\Docs\Manuel d'intervention d'urgence MFC.doc" Volume in drive C has no label. Volume Serial Number is 3C18-E114 Directory of C:\Shares\Shared\Reference\Safety Management System\Video CD\AutoP lay\Docs File Not Found 2013-10-17 9:38 C:\> This is from a Command Prompt window where I went to Properties and told it I wanted to modify who it ran as. I opened it, had it run as me with the "restricted access" unchecked, then ran the above. The file in question has the following ACLs: Administrators, SYSTEM, and OurCompanyUsers. All three have full control of everything. Nobody has any Deny bits set. I am a member of Administrators. So I don't believe it's a permissions issue. It's not a USB drive, so this time there is no question of USB hardware. Windows Server 2003 Standard Edition SP2. What does this mean? Is this more likely a hardware or software problem?

    Read the article

  • Utility to store/cache all web pages and YouTube videos

    - by jonathanconway
    I found myself in the following situation. I'm travelling abroad with my laptop. I connect to a WiFi point and do a bit of browsing and play a YouTube video or two. Then I disconnect and hop on either a plane or taxi. Now I want to go back to some of the webpages I was browsing before and continue reading them, or watch some more of that YouTube video. Unfortunately it seems like none of these resources are cached, or if they are, I have no idea how to access them. Here's what I'd like: A utility that starts when my computer boots and sits in the background, silently caching all the web pages that I view. Not only that, but also the resources such as YouTube videos. Later, when I re-navigate to a site while disconnected, the browser automatically pulls the pages from my cache rather than giving me a 404 error. Or I can click an icon in the system tray and see a list of all the pages/videos in the cache and view any that I like. I'm sure Internet Explorer had a feature like this at some point, like "Offline Mode" or something. But these days it doesn't seem to work. Even when I select that option I still can't view pages that I'm certain I downloaded before. So has the utility I'm talking about been developed yet?

    Read the article

  • Ubuntu xrandr rotate issue

    - by user83544
    I've just bought a second monitor for my PC which happens to be a pivot monitor. I've already read lots of forums related to my problem but haven't come across a solution - I have the same symptoms as dozens of posts but no matter whatever I try it just doesn't work. I've already changed the xorg.conf file and added in the device section just under Driver "nvidia" the following for my second monitor: Option "RandRRotation" "on" When I save and reboot I try to rotate my screen with the nvidia X server settings by choosing the second monitor and clicking either "left" or "right" for the rotation. It immediately exits the nvidia settings window and does nothing. I tried within the terminal by typing: xrandr -o right I get the following error: X Error of failed request: BadMatch (invalid parameter attributes) Major opcode of failed request: 154 (RANDR) Minor opcode of failed request: 2 (RRSetScreenConfig) Serial number of failed request: 14 Current serial number in output stream: 14 I actually manage to rotate it with Option "Rotate" "CCW" instead of "RandRRotation". The problem with this solution is that you get the second monitor in the right position, but any window you open on that screen is practically unchangeable. You can't change the size nor move it, making it useless for reading PDFs, which is the main reason why I bought this second screen to help me write my thesis. Any help is really appreciated. sudo lshw -c video hiram@hiram-linux:~$ sudo lshw -c video *-display description: VGA compatible controller product: nVidia Corporation vendor: nVidia Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nvidia latency=0 resources: irq:16 memory:f8000000-f9ffffff memory:d8000000-dfffffff memory:d4000000-d7ffffff ioport:dc00(size=12 memory:fbd80000-fbdfffff

    Read the article

  • Driver issue for 7850 HD Diamond Windows 7

    - by Mr.Student
    I have an issue with windows 7 implementing the drivers ati provides for my 7850 HD Diamond video card. The video card is plugged in correctly to the PCIE 2.0 slots of my motherboard (p6t asus) with more then enough power. Fortunately the card works as I have my monitor plugged into the card itself and I can see just fine. However windows 7 does not replace the standard vga default microsoft driver with catalyst drivers that I've tried installing from online as well as the CD. Every time I install the drivers using Catalyst Install manager it always finishes with "Install complete(Warnings occured)". I then see the warnings it has which it instead reports that it successfully installed the SDK, Catalyst Install Manager, and HDMI/AUDIO packages. When I check my device manager after that, the display adapter still shows as standard vga and that its still using microsoft default display adapter. Now this current card is replacing an old card of mine which is the ATI 4890 HD which works beautifully. In fact for the old card to work, all I need to do is go to device manager and right click on standard vga - click update driver and windows 7 magically finds the correct driver to install and everything is good. Not so with the new card. I've even went into my regedits and uninstalled every bit of ati driver software before reinstalling my new card. Nothing's worked thus far. I've already exchanged my card out once and talked to customer support from my motherboard, microsoft, and ati all blaming the other. Please help me out!!

    Read the article

  • ATI HDMI Audio disappears in Windows 7 when a TV is connected

    - by jsalonen
    So far I have unsuccessfully googled for HOURS with no luck fixing this very annoying problem. The settings is the following: I have PC running Windows 7 RC (64-bit) Video card is a ATI Radeon 4850 series card (Sapphire HD 4850 512MB to be exact) The video card has HDMI out with built-in audio chip I have an HDMI cable connecting the PC to a TV (Sony Bravia series) The problem is that when I connect the HDMI cable to the TV, the ATI HDMI Sound output device disappears completely from the list of playback devices in Windows. As a workaround I can restore the audio by re-installing the HDMI audio driver. However, when I disconnect the TV the driver disappears again. So basically, every time I want to watch stuff on my TV, I have to reinstall audio driver, which of course is VERY annoying. EDIT: I have figured out that I do not need to re-istall the HDMI audio driver to restore sound; I only need to reboot my computer with the HDMI cable plugged in to restore the audio driver. This suggests that the problem has something to do with information passed from TV to computer, which makes my HDMI Audio driver disappear. Are there any other, more elegant workarounds for this problem? All help is much appreciated!

    Read the article

  • Converting DisplayPort and/or HDMI to DVI-D?

    - by Jeff Atwood
    Newer Radeon video cards come with four ports standard: DVI (x2) HDMI DisplayPort If I want to run three 24" monitors, all of which are DVI only, from this video card -- is it possible to convert either the HDMI or DisplayPort to DVI? If so, how? And which one is easier/cheaper to convert? I did a little research and it looks like there isn't a simple "dongle" method. I found this DisplayPort to DVI-D Dual Link Adapter but it's $120; almost cheaper to buy a new monitor that supports HDMI or DisplayPort inputs at that point! There's also a HDMI to DVI-D adapter at Monoprice but I'm not sure it will work, either. AnandTech seems to imply that you do need the DisplayPort-to-DVI: The only catch to this specific port layout is that the card still only has enough TMDS transmitters for two ports. So you can use 2x DVI or 1x DVI + HDMI, but not 2x DVI + HDMI. For 3 DVI-derived ports, you will need an active DisplayPort-to-DVI adapter.

    Read the article

  • Is it possible to have a wireless in-house NAS with wireless data transfer rates of equivalent to SATA speeds?

    - by techaddict
    Basically I would like to know, if it is possible to set up an NAS in my house to be accessed wirelessly, that can reach equivalent real-life data transfer speeds to USB 3.0 or an internal SATA hard drive. I have been wanting to do this for some time ( a couple of years now). Basically, this is what I want to do: Plug in a number of hard drives in an array, somewhere in my house, to be left plugged in and never have to be monitored. Ideally several terabytes. Whenever I am home, to have my computer and laptop configured to automatically find the NAS, as easy as plugging in an external hard drive - except completely wirelessly. Data transfer needs to be as seamless and quick as having added another internal hard drive in my laptop. Moreover, data should be able to accessed without having to copy it over - I should be able to wirelessly access the NAS and browse files, and open files directly from the NAS. For example, say I wanted to open a video - I should be able to play the video that is located on the NAS, directly from the NAS, completely wirelessly. If I wanted to open a .pdf file, I should be able to open it and read it directly from the NAS, as if it were located on my physical internal hard drive. Cost is important as well. Please tell me what equipment I need for this to be possible. I know you geniuses out there who can tell me if this is possible.

    Read the article

  • Analyze a BSOD (irql_less_than_or_equal)

    - by Bruno Reis
    Hello. About 2 months ago I bought a new system and built it at home: Mother board: XFX X58i Processor: Core i7 920, using the stock cooler Memory: 3x2GB Corsair DDR3 1600 Video card: NVIDIA GTS 250 (1GB) Hard disk: 2x WD 500GB, 7200rpm I have 2 screens plugged into the video card, and the system is connected to a 550W PSU. Nothing is overclocked. After building the system, I stressed it a lot with Prime95 and rthdribl to check its stability. All my tests were perfect. So I reinstalled Win 7 x64 Professional and started using it normally. The first week (2010-03-15) I got the infamous irql_less_than_or_equal BSOD. Ten days after (2010-03-24) I got another one. Then on 2010-04-09, 2010-05-04. Since 2 days ago it became worse: I got one bluescreen per day! (2010-05-12, 2010-05-13, 2010-05-14). I installed BlueScreenView to try to obtain some information, but I'm not able to extract any useful information apart from the bug check string (irql_less_than_or_equal), and that it was caused by ntoskrnl.exe (the first three at ntoskrnl.exe+71f00, the last 4 at ntoskrnl.exe+70600 -- which I suspect could be the same thing, as Microsoft could have patched this file in the mean time, so the address of the function causing it changed). Then I stressed my memory sticks with memtest, they worked perfectly. After booting, I've stressed my GPU with FurMark and RTHDRIBL, everything was fine. Then I stressed the CPU with 4 instances of Prime95 while monitoring the temperature -- that never exceeded 85oC with the case closed --, everything fine. Finally I've stressed the whole system with HeavyLoad for a looooong time, everything worked just fine. So, I have stressed most of the components of the system, but couldn't get any useful information from it. Do you have any hint on what else can I do to find the culprit? Thanks Bruno

    Read the article

  • No signal on monitor after plug it to a linux box

    - by yaroot
    I use my old computer as an NAS, so I remove the monitor after I installed linux on it (disconnect vga cable). I use ssh to control the machine and it works fine. Until some day, after kernel/softare upgrade or messing up some configs, I cannot connect to it through ssh, then I have to plug the monitor back, but the monitor says "No input signal". So I have to restart the computer WITH the monitor connected, and the monitor's back! I think the computer/linux kernel doesn't detect the monitor plug-in event. So how can I start my linux box without a monitor, but when it goes wrong I can still plug my monitor (vga) back and use the console. Edit: just one pci-e video card, has dvi, vga, tv/out (s-video) Edit2: Xorg is not running. I just need the console (CTRL+ALT+F1). The problem is, if the machine booted without a monitor connected, it won't give me a pseudo terminal after I attach the vga cable while it's running. Clearly the monitor is not auto detected as usb device. I'm wondering how to let the monitor auto detected.

    Read the article

  • BIOS unable to boot CD or Hard Drive

    - by Gabriel
    Motherboard Intel DQ35MP. HDD Caviar Green 1TB. I'm having problems with my BIOS and/or hard drive/disc drive. Came back from a trip, booted my computer, and realized that the BIOS wasn't booting anymore, just a black screen with no beep sounds. Only fans and lights on. Then I thought it might be caused by the video card, I removed it, and still no BIOS screen. Then I removed the hard drive and voila BIOS screen is back again. If the hard drive is defective then I can check that with a Rescue Disk. I inserted the CD on the Disc Tray but the computer did not respond to it, the screen freezes in black with an "E7" string at the bottom right corner just after the BIOS screen, this happens with or without discs. BIOS settings are set to default, and CD reading is on top of the boot device list. EDIT I removed the BIOS battery, rebooted the CPU, the BIOS screen showed up, and then it freezed in E7. Placed the BIOS batttery, rebooted and same thing, we are stuck with the E7 string. I uploaded a video to illustrate the problem http://www.youtube.com/watch?v=13jPdBcIrBU

    Read the article

  • Hardware doesn't work some times

    - by Ali
    I have an Asus n51vf laptop. I bought it not long time ago (less than a month) and installed Windows 7 on it. Since that it wasn't new when I bought it, I don't know, if the problem was occuring before re-installing Windows 7. There are two problems, that might (or might not) have something to do with each other: Problem The less annoying problem is that the screen flickers ONLY on YouTube when scrolling and/or pausing/playing the video or moving the curser over the video. The second more timeconsuming problem is that some of the hardware doesn't work when I turn up the computer. Then I have to reboot the computer and try again. Example: I turn on the computer, and the touchpad doesn't work - I then reboot and it works again. This has so far happened to the screen (leading to a black screen), the keyboard and the touchpad. More frequently the mouse. What have I tried to do so far? I tried reeinstalling the touchpad driver (Synaptic Touchpad driver from Asus Support Page) - didn't help at all. I even tried reinstalling the driver when the non-responding mouse on startup-problem occured (using the keyboard), but it asked me to reboot and didn't help at all. I also installed (and reinstalled) the graphics driver; it's a GeForce GT 130M. Now, the problem never occurs spontaneously - it only appears when booting my computer. I can even use the computer for heavy tasks (games, multiple programs running etc.) with no problem at all. I suspect, that the problem is in some booting mechanism that fails: Maybe the Windows driver loading? Motherboard problems?

    Read the article

  • How to crop Screen Recordings under Snow Leopard?

    - by willc2
    Quicktime Player for Snow Leopard now allows you record the screen. Awesome! Once you have a movie it will let you trim screen recordings for length. Is there a way to crop the movie's dimensions, either in QT or using some built-in or free software? Update: How to crop to an arbitrary size and aspect ratio? iMovie only seems to let you crop to the aspect ratio of the containing project. Result: Both good answers but since I have QuickTime Player 7 and Photoshop, that's the workflow I choose as the answer. NOTE: If you have Photoshop Extended, you can import a movie, use the crop tool, and Export the cropped movie. Not free or built-in, but convenient. To summarize the instructions from the video link ricbax posted: Open movie in QuickTime Player 7 Copy a frame and Paste it into a new document in Photoshop Draw a rectangular selection around the area to keep and fill with black Invert the selection and fill with white Save as .GIF, with 2 colors Back in QuickTime Player 7, open Movie Properties window Select the Video Track Select the Visual Settings Tab Drag and Drop the 2-color .GIF file onto the Mask drop area (or use choose file button) Export the (now cropped) movie DONE

    Read the article

  • Using Toshiba 22EL833 as PC display through HDMI input

    - by Oleg V. Volkov
    I had another Toshiba TV - 19SL738 - connected to this same PC and video card (GTX 8800) through DVI<-HDMI (DVI on PC side, HDMI on TV) before, that was working perfectly at it's native resolution 1360x768. Some time ago I had to change to 22EL833 and immediately faced problem with Windows 7 control panel and NVIDIA control panel both reporting native resolution for new TV as 1080i, 1920x1280, despite TV documentation saying that it have same 1360x768 as previous one. Practical tests confirmed that true native resolution is indeed 1360x768, because plugging in through DVI<-VGA and setting custom resolution through NVIDIA panel shown clear colors and crisp image, while setting anything different with either DVI<-VGA or DVI<-HDMI produced horribly distorted or squished images, with almost unreadable slim lines (as in letters, for example). Now, my problem is that there's no drivers for this TV and I'm unable to get good image while connecting it through DVI<-HDMI directly. The best I've achieved is editing EDID/driver manually, to persuade system that native resolution should be 1360x768, and while image became mostly clear, colors turned to some strange washed out effect, with pools of pure yellow, cyan and magenta there and there filling place of other colors. Gradients also became noticeably stripped as well. Somehow it looks like dithering gone bad and makes me suspect that image is still down/upscaled several times internally somewhere along the line. How can I connect this TV to DVI output of my video card to get best possible clear image, correct colors and correct native resolution?

    Read the article

  • Windows Remote Desktop: "configuring remote session" closes without error

    - by icelava
    I have a desktop/laptop pair at home operating x64 Windows 7 (the desktop was upgraded from Windows Vista, works just fine). I remote desktop to them on a daily basis when outside. In recent weeks, I would occasionally fail to connect to my desktop. It can connect and authenticate fine, but the "configuring remote session" dialog would simply close and not show me the desktop window or any error message. There is no error event log relating to this on the desktop computer. Some suggestions call for disabling remote audio, which mine already is, but trying different audio modes did not yield any different result. I am not too sure if this is related to video card drivers (they do get auto-updated), since remote desktop video is supposed to steer via a virtual device driver? Nonetheless the desktop operates three monitors via an ATI Radeon HD5770 (1 Displayport, 2 DVI). I do not see a real problem with that since I can mostly connect and operate it remotely. I try to "remote tunnel" via my home laptop but obviously won't work either as the problem lies in the desktop. What other conditions can cause remote desktop to break without error? UPDATE I came home and still couldn't connect to the desktop until I restarted the entire system.

    Read the article

  • What parts of a motherboard age, and how can I choose one with the longest possible life?

    - by Robert Harvey
    I have a home-built computer that's probably about four years old. I realize this probably seems ancient to some folks, but computers have no moving parts (except the fans), so theoretically they should last a long time, if I still have software to run on them. A few weeks ago, it began blue-screening and freezing up, with various error messages. It almost always happened about five minutes after startup. I assumed that the video card was overheating, since the cheap little fan on the heatsink died, so I replaced it. Long story short, after upgrading the video drivers a couple of times and performing some other troubleshooting, I remembered that the last time this happened, I took out the memory SIMS and cleaned the contacts with a gum eraser, so I did that again (noting that the SATA cables were very close to the chips on the SIMS). I re-routed the cables and reinstalled the SIMS. So far, so good; the machine has been trouble-free since. But blue-screens are distressing; I never know what bits are being chewed up in my OS installation when something like this happens. So I'm wondering if I'm choosing my components properly. If it matters, it's an Intel D915GAG motherboard and Corsair memory, but what I'm wondering is, should I be looking for certain characteristics when I choose these parts for my next computer, so that I can avoid this problem in my next build?

    Read the article

  • Configuring three monitors with two Radeon X1600/X1650 graphics cards under Ubuntu

    - by cpm
    I have three SyncMaster 932a monitors I want to use with two Radeon X1600/X1650 cards under Linux. I am running X.org X Server 1.6.0, as provided by Ubuntu's Wubi installer. After turning off mirroring, I ended up with this xorg.conf: Section "Monitor" Identifier "Configured Monitor" EndSection Section "Screen" Identifier "Default Screen" Monitor "Configured Monitor" Device "Configured Video Device" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Device" Identifier "Configured Video Device" EndSection The left monitor had a menu bar and a task bar, the center monitor was just desktop, and windows would maximize to the current monitor. The third monitor and second graphics card weren't being used at all. Then I changed my configuration to manually specify each card with their PCI bus: Section "ServerLayout" Identifier "TheLayout" Screen 0 "Radeon Screen 1" Screen 1 "Radeon Screen 2" RightOf "Radeon Screen 1" EndSection Section "Screen" Identifier "Radeon Screen 1" Monitor "Configured Monitor" Device "Radeon the First" SubSection "Display" Virtual 2560 1024 EndSubSection EndSection Section "Screen" Identifier "Radeon Screen 2" Monitor "Configured Monitor" Device "Radeon the Second" EndSection Section "Device" Identifier "Radeon the First" Driver "radeon" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Radeon the Second" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Monitor" Identifier "Configured Monitor" EndSection Now both the left and right monitors have task bars and menu bars. Windows cannot be dragged from the first two monitors to the third monitor. Also, maximizing in the left or center window fills both monitors. I also tried adding Option "Xinerama" "true" to the ServerLayout section. X11 wasn't able to start up. I want to: Allow moving windows along all three monitors. Maximizing only fills the current monitor. Either have menu/task bars on only the left monitor or all three monitors How can I make this possible?

    Read the article

  • Using Toshiba 22EL833 as PC display with GTX8800

    - by Oleg V. Volkov
    I had another Toshiba TV - 19SL738 - connected to this same PC and video card (GTX 8800) through DVI<-HDMI (DVI on PC side, HDMI on TV) before, that was working perfectly at it's native resolution 1360x768. Some time ago I had to change to 22EL833 and immediately faced problem with Windows 7 control panel and NVIDIA control panel both reporting native resolution for new TV as 1080i, 1920x1280, despite TV documentation saying that it have same 1360x768 as previous one. Practical tests confirmed that true native resolution is indeed 1360x768, because plugging in through DVI<-VGA and setting custom resolution through NVIDIA panel shown clear colors and crisp image, while setting anything different with either DVI<-VGA or DVI<-HDMI produced horribly distorted or squished images, with almost unreadable slim lines (as in letters, for example). Now, my problem is that there's no drivers for this TV and I'm unable to get good image while connecting it through DVI<-HDMI directly. The best I've achieved is editing EDID/driver manually, to persuade system that native resolution should be 1360x768, and while image became mostly clear, colors turned to some strange washed out effect, with pools of pure yellow, cyan and magenta there and there filling place of other colors. Gradients also became noticeably stripped as well. Somehow it looks like dithering gone bad and makes me suspect that image is still down/upscaled several times internally somewhere along the line. How can I connect this TV to DVI output of my video card to get best possible clear image, correct colors and correct native resolution?

    Read the article

< Previous Page | 278 279 280 281 282 283 284 285 286 287 288 289  | Next Page >