Search Results

Search found 8042 results on 322 pages for 'days'.

Page 287/322 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

• How do I turn on wireless adapter on HP Envy dv6 7200 under Ubuntu (any version)?

  - by Dave B.

  I have a new HP Envy dv6 7200 with dual boot Windows 8 / Ubuntu 12.04. In windows, the F12 key in Windows activates the "airplane mode" switch which enables/disables both on-board (mini PCIe) and USB wireless adapters. In Ubuntu, however, the wireless adapter is turned off by default and cannot be turned back on via the F12 key (or any other combination of F12 and Ctrl, Fn, Shift, etc.). Let me explain the "fixes" I've seen in various forums and explain what did or did not happen. These are listed in no particular order. (Spoiler alert: wireless is still broke). Solution 1? Use HP's "Wireless Assistant" utility to permanently activate the wireless card in Windows, then boot into Ubuntu to happily find it working. Unfortunately, this utility works in Windows 7 but not Windows 8. On the other hand, hardware drivers from HP are only available for Windows 8 for this model. Catch 22 (I could not find a comparable utility for Windows 8). Solution 2? Use a USB wireless adapter to sidestep the on-board device. I purchased such a device from thinkpenguin.com to be sure that it would be Linux-friendly. However, the wireless switch enables / disables all wireless devices including USB. So, there's my $50 donation to the nice folks at thinkpenguin.com, but still no solution. Solution 3? Following the Think Penguin folk's suggestion, modify the mini PCI express adapter following instructions here: http://www.notebookforums.com/t/225429/broken-wireless-hardware-switch-fix Tempting, but I then violate the terms of my warranty mere days after opening the box. This might be a good solution for an older machine that you want to get your geek on with, but not for a new box. Solution 4? rfkill unblock all No effect whatsoever. ubuntu@ubuntu-hp-evny:~$ rfkill unblock all ubuntu@ubuntu-hp-evny:~$ rfkill list all 0: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes Solution 5? Re-install drivers. Done and done. Ubuntu recognizes the device - perhaps even without re-installing the drivers? - but cannot turn it on. How do I know this? In the Network Manager drop-down menu, the wireless option is blacked out and a message reads something like: "wireless network is disabled by a hardware switch". Solution 6? Identify a physical switch on the laptop and flip it. There is no such switch on this machine. In fact, walking through Best Buy yesterday, I checked and not a single new laptop PC had a physical switch on it. All of the wireless switches are either the F2 or F12 key ... I wonder if askubuntu will not be plagued by this exact issue in the near future? Additional info - lspci ubuntu@ubuntu-hp-evny:~$ lspci 00:00.0 Host bridge: Intel Corporation Ivy Bridge DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Ivy Bridge PCI Express Root Port (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Ivy Bridge Graphics Controller (rev 09) 00:14.0 USB controller: Intel Corporation Panther Point USB xHCI Host Controller (rev 04) 00:16.0 Communication controller: Intel Corporation Panther Point MEI Controller #1 (rev 04) 00:1a.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #2 (rev 04) 00:1b.0 Audio device: Intel Corporation Panther Point High Definition Audio Controller (rev 04) 00:1c.0 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 1 (rev c4) 00:1c.2 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 3 (rev c4) 00:1c.3 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 4 (rev c4) 00:1c.5 PCI bridge: Intel Corporation Panther Point PCI Express Root Port 6 (rev c4) 00:1d.0 USB controller: Intel Corporation Panther Point USB Enhanced Host Controller #1 (rev 04) 00:1f.0 ISA bridge: Intel Corporation Panther Point LPC Controller (rev 04) 00:1f.2 RAID bus controller: Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04) 00:1f.3 SMBus: Intel Corporation Panther Point SMBus Controller (rev 04) 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0de9 (rev a1) 08:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. Device 5229 (rev 01) 0a:00.0 Network controller: Ralink corp. Device 539b 0b:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) Any suggestions would be much appreciated!

  Read the article

• The Joy Of Hex

  - by Jim Giercyk

  While working on a mainframe integration project, it occurred to me that some basic computer concepts are slipping into obscurity. For example, just about anyone can tell you that a 64-bit processor is faster than a 32-bit processer. A grade school child could tell you that a computer “speaks” in ‘1’s and ‘0’s. Some people can even tell you that there are 8 bits in a byte. However, I have found that even the most seasoned developers often can’t explain the theory behind those statements. That is not a knock on programmers; in the age of IntelliSense, what reason do we have to work with data at the bit level? Many computer theory classes treat bit-level programming as a thing of the past, no longer necessary now that storage space is plentiful. The trouble with that mindset is that the world is full of legacy systems that run programs written in the 1970’s.  Today our jobs require us to extract data from those systems, regardless of the format, and that often involves low-level programming. Because it seems knowledge of the low-level concepts is waning in recent times, I thought a review would be in order.       CHARACTER: See Spot Run HEX: 53 65 65 20 53 70 6F 74 20 52 75 6E DECIMAL: 83 101 101 32 83 112 111 116 32 82 117 110 BINARY: 01010011 01100101 01100101 00100000 01010011 01110000 01101111 01110100 00100000 01010010 01110101 01101110 In this example, I have broken down the words “See Spot Run” to a level computers can understand – machine language.     CHARACTER:  The character level is what is rendered by the computer.  A “Character Set” or “Code Page” contains 256 characters, both printable and unprintable.  Each character represents 1 BYTE of data.  For example, the character string “See Spot Run” is 12 Bytes long, exclusive of the quotation marks.  Remember, a SPACE is an unprintable character, but it still requires a byte.  In the example I have used the default Windows character set, ASCII, which you can see here:  http://www.asciitable.com/ HEX:  Hex is short for hexadecimal, or Base 16.  Humans are comfortable thinking in base ten, perhaps because they have 10 fingers and 10 toes; fingers and toes are called digits, so it’s not much of a stretch.  Computers think in Base 16, with numeric values ranging from zero to fifteen, or 0 – F.  Each decimal place has a possible 16 values as opposed to a possible 10 values in base 10.  Therefore, the number 10 in Hex is equal to the number 16 in Decimal.  DECIMAL:  The Decimal conversion is strictly for us humans to use for calculations and conversions.  It is much easier for us humans to calculate that [30 – 10 = 20] in decimal than it is for us to calculate [1E – A = 14] in Hex.  In the old days, an error in a program could be found by determining the displacement from the entry point of a module.  Since those values were dumped from the computers head, they were in hex. A programmer needed to convert them to decimal, do the equation and convert back to hex.  This gets into relative and absolute addressing, a topic for another day.  BINARY:  Binary, or machine code, is where any value can be expressed in 1s and 0s.  It is really Base 2, because each decimal place can have a possibility of only 2 characters, a 1 or a 0.  In Binary, the number 10 is equal to the number 2 in decimal. Why only 1s and 0s?  Very simply, computers are made up of lots and lots of transistors which at any given moment can be ON ( 1 ) or OFF ( 0 ).  Each transistor is a bit, and the order that the transistors fire (or not fire) is what distinguishes one value from  another in the computers head (or CPU).  Consider 32 bit vs 64 bit processing…..a 64 bit processor has the capability to read 64 transistors at a time.  A 32 bit processor can only read half as many at a time, so in theory the 64 bit processor should be much faster.  There are many more factors involved in CPU performance, but that is the fundamental difference.    DECIMAL HEX BINARY 0 0 0000 1 1 0001 2 2 0010 3 3 0011 4 4 0100 5 5 0101 6 6 0110 7 7 0111 8 8 1000 9 9 1001 10 A 1010 11 B 1011 12 C 1100 13 D 1101 14 E 1110 15 F 1111   Remember that each character is a BYTE, there are 2 HEX characters in a byte (called nibbles) and 8 BITS in a byte.  I hope you enjoyed reading about the theory of data processing.  This is just a high-level explanation, and there is much more to be learned.  It is safe to say that, no matter how advanced our programming languages and visual studios become, they are nothing more than a way to interpret bits and bytes.  There is nothing like the joy of hex to get the mind racing.

  Read the article

• Customer Engagement: Are Your Customers Engaged With Your Brands?

  - by Michael Snow

  Engaging Customers is Critical for Business Growth This week we'll be spending some time looking at Customer Engagement. We all have stories about how we try to engage our customers better than ever before.  We all know that successfully engaging customers is critical to an organization’s business success. We also know that engaging our customers is more challenging today than ever before. There is so much noise to compete with for getting anyone's attention. Over the last decade and a half we’ve watched as the online channel became a primary one for conducting our business and even managing our lives. And during this whole process or evolution, the customer journey has grown increasingly complex. Customers themselves have assumed increasing power and influence over the purchase process and for setting the tone and pace of the relationships they have with brands and you see the evidence of this in the really high expectations that customers have today. They expect brand experiences that are personalized and relevant -- In other words they want experiences that demonstrate that the brand understands their interests, preferences and past interactions with them. They also expect their experience with a brand and the community surrounding it to be social and interactive – it’s no longer acceptable to have a static, one-way dialogue with your customer base or to fail to connect your customers with fellow customers, or with your employees and partners. And on top of all this, customers expect us to deliver this rich and engaging, personalized and interactive experience, in a consistent way across a variety of channels including web, mobile and social channels or even offline venues such as in-store or via a call center. And as a result, we see that delivery on these expectations and successfully engaging your customers is a great challenge today. Customers expect a personal, engaging and consistent online customer experience. Today’s consumer expects to engage with your brand and the community surrounding it in an interactive and social way. Customers have come to expect a lot for the online customer experience.  ·        They expect it to be personal: o   Accessible:  - Regardless of my device  Via my existing online identities  o   Relevant:  Content that interests me  o   Customized:  To be able to tailor my online experience  ·        They expect it to be engaging: o   Social:  So I can share content with my social networks  o   Intuitive:  To easily find what I need   o   Interactive:  So I can interact with online communities And they expect it to be consistent across the online experience – so you better have your brand and information ducks in a row. These expectations are not only limited to your customers by any means. Your employees (and partners) are also expecting to be empowered with engagement tools across their internal and external communications and interactions with customers, partners and other employees. We had a great conversation with Ted Schadler from Forrester Research entitled: "Mobile is the New Face of Engagement" that is now available On-Demand. Take a look at all the webcasts available to watch from our Social Business Thought Leader Series. Social capabilities have become so pervasive and changed customers’ expectations for their online experiences. The days of one-direction communication with customers are at an end. Today’s customers expect to engage in a dialogue with your brand and the community surrounding it in an interactive and social way. You have at a very short window of opportunity to engage a customer before they go to another site in their pursuit of information, product, or services. In fact, customers who engage with brands via social media tend to spend more that customers who don’t, between 20% and 40% more.  And your customers are also increasingly influenced by their social networks too – 40% of consumers say they factor in Facebook recommendations when making purchasing decisions.  This means a few different things for today’s businesses. Incorporating forms of social interaction such as commenting or reviews as well as tightly integrating your online experience with your customers’ social networking experiences into the online customer experience are crucial for maintaining the eyeballs on your desired pages. --- Notes/Sources: 93% - Cone Finds that Americans Expect Companies to Have a Presence in Social Media - http://www.coneinc.com/content1182 40% of consumers factor in Facebook recommendations when making decisions about purchasing (Increasing Campaign Effectiveness with Social Media, Syncapse, March 2011) 20%-40% - Customers who engage with a company via social media spend this percentage more with that company than other customers (Source: Bain & Company Report – Putting Social Media to Work)

  Read the article

• JavaOne 2012 Sunday Strategy Keynote

  - by Janice J. Heiss

  At the Sunday Strategy Keynote, held at the Masonic Auditorium, Hasan Rizvi, EVP, Middleware and Java Development, stated that the theme for this year's JavaOne is: “Make the future Java”-- meaning that Java continues in its role as the most popular, complete, productive, secure, and innovative development platform. But it also means, he qualified, the process by which we make the future Java -- an open, transparent, collaborative, and community-driven evolution. "Many of you have bet your businesses and your careers on Java, and we have bet our business on Java," he said.Rizvi detailed the three factors they consider critical to the success of Java--technology innovation, community participation, and Oracle's leadership/stewardship. He offered a scorecard in these three realms over the past year--with OS X and Linux ARM support on Java SE, open sourcing of JavaFX by the end of the year, the release of Java Embedded Suite 7.0 middleware platform, and multiple releases on the Java EE side. The JCP process continues, with new JSR activity, and JUGs show a 25% increase in participation since last year. Oracle, meanwhile, continues its commitment to both technology and community development/outreach--with four regional JavaOne conferences last year in various part of the world, as well as the release of Java Magazine, with over 120,000 current subscribers. Georges Saab, VP Development, Java SE, next reviewed features of Java SE 7--the first major revision to the platform under Oracle's stewardship, which has included near-monthly update releases offering hundreds of fixes, performance enhancements, and new features. Saab indicated that developers, ISVs, and hosting providers have all been rapid adopters of the platform. He also noted that Oracle's entire Fusion middleware stack is supported on SE 7. The supported platforms for SE 7 has also increased--from Windows, Linux, and Solaris, to OS X, Linux ARM, and the emerging ARM micro-server market. "In the last year, we've added as many new platforms for Java, as were added in the previous decade," said Saab.Saab also explored the upcoming JDK 8 release--including Project Lambda, Project Nashorn (a modern implementation of JavaScript running on the JVM), and others. He noted that Nashorn functionality had already been used internally in NetBeans 7.3, and announced that they were planning to contribute the implementation to OpenJDK. Nandini Ramani, VP Development, Java Client, ME and Card, discussed the latest news pertaining to JavaFX 2.0--releases on Windows, OS X, and Linux, release of the FX Scene Builder tool, the JavaFX WebView component in NetBeans 7.3, and an OpenJFX project in OpenJDK. Nandini announced, as of Sunday, the availability for download of JavaFX on Linux ARM (developer preview), as well as Scene Builder on Linux. She noted that for next year's JDK 8 release, JavaFX will offer 3D, as well as third-party component integration. Avinder Brar, Senior Software Engineer, Navis, and Dierk König, Canoo Fellow, next took the stage and demonstrated all that JavaFX offers, with a feature-rich, animation-rich, real-time cargo management application that employs Canoo's just open-sourced Dolphin technology.Saab also explored Java SE 9 and beyond--Jigsaw modularity, Penrose Project for interoperability with OSGi, improved multi-tenancy for Java in the cloud, and Project Sumatra. Phil Rogers, HSA Foundation President and AMD Corporate Fellow, explored heterogeneous computing platforms that combine the CPU and the parallel processor of the GPU into a single piece of silicon and shared memory—a hardware technology driven by such advanced functionalities as HD video, face recognition, and cloud workloads. Project Sumatra is an OpenJDK project targeted at bringing Java to such heterogeneous platforms--with hardware and software experts working together to modify the JVM for these advanced applications and platforms.Ramani next discussed the latest with Java in the embedded space--"the Internet of things" and M2M--declaring this to be "the next IT revolution," with Java as the ideal technology for the ecosystem. Last week, Oracle released Java ME Embedded 3.2 (for micro-contollers and low-power devices), and Java Embedded Suite 7.0 (a middleware stack based on Java SE 7). Axel Hansmann, VP Strategy and Marketing, Cinterion, explored his company's use of Java in M2M, and their new release of EHS5, the world's smallest 3G-capable M2M module, running Java ME Embedded. Hansmaan explained that Java offers them the ability to create a "simple to use, scalable, coherent, end-to-end layer" for such diverse edge devices.Marc Brule, Chief Financial Office, Royal Canadian Mint, also explored the fascinating use-case of JavaCard in his country's MintChip e-cash technology--deployable on smartphones, USB device, computer, tablet, or cloud. In parting, Ramani encouraged developers to download the latest releases of Java Embedded, and try them out.Cameron Purdy, VP, Fusion Middleware Development and Java EE, summarized the latest developments and announcements in the Enterprise space--greater developer productivity in Java EE6 (with more on the way in EE 7), portability between platforms, vendors, and even cloud-to-cloud portability. The earliest version of the Java EE 7 SDK is now available for download--in GlassFish 4--with WebSocket support, better JSON support, and more. The final release is scheduled for April of 2013. Nicole Otto, Senior Director, Consumer Digital Technology, Nike, explored her company's Java technology driven enterprise ecosystem for all things sports, including the NikeFuel accelerometer wrist band. Looking beyond Java EE 7, Purdy mentioned NoSQL database functionality for EE 8, the concurrency utilities (possibly in EE 7), some of the Avatar projects in EE 7, some in EE 8, multi-tenancy for the cloud, supporting SaaS applications, and more.Rizvi ended by introducing Dr. Robert Ballard, oceanographer and National Geographic Explorer in Residence--part of Oracle's philanthropic relationship with the National Geographic Society to fund K-12 education around ocean science and conservation. Ballard is best known for having discovered the wreckage of the Titanic. He offered a fascinating video and overview of the cutting edge technology used in such deep-sea explorations, noting that in his early days, high-bandwidth exploration meant that you’d go down in a submarine and "stick your face up against the window." Now, it's a remotely operated, technology telepresence--"I think of my Hercules vehicle as my equivalent of a Na'vi. When I go beneath the sea, I actually send my spirit." Using high bandwidth satellite links, such amazing explorations can now occur via smartphone, laptop, or whatever platform. Ballard’s team regularly offers live feeds and programming out to schools and the world, spanning 188 countries--with embedding educators as part of the expeditions. It's technology at its finest, inspiring the next-generation of scientists and explorers!

  Read the article

• Silverlight 4 Twitter Client &ndash; Part 7

  - by Max

  Download this article as a PDF Welcome back :) This week we are going to look at something more exciting and a much required feature for any twitter client – auto refresh so as to show new status updates. We are going to achieve this using Silverlight 4 Timers and a bit and refresh our datagrid every 2 minutes to show new updates. We will do this so that we do only minimal request to the twitter api, so that twitter does not block us – there is a limit of 150 request an hour. Let us get started now. Also we will get the profile user id hyperlinked, so that when ever the user click on it, we will take them to their twitter page. Also it was a pain to always run this application by pressing F5, then it would open in a browser you would have to right click uninstall and install it again to see any changes. All this and yet we were not able to debug it :( Now there is a solution for this to run a silverlight application directly out of browser and yet have the debug feature. Super cool, here is how. Right on the Silverlight project and go to debug and then select the Out-Of-Browser application option and choose the *.Web project. Then just right click on the SL project and set as Startup Project. There you go, now every time you press F5, it will automatically run out of browser and still have the debug options. I go to know about this after some binging. Now let us jump to the core straight away. 1) To get the user id hyperlinked, we need to have a DataGridTemplateColumn and within that have a HyperLinkButton. The code for this will  be <data:DataGridTemplateColumn> <data:DataGridTemplateColumn.CellTemplate> <DataTemplate> <HyperlinkButton Click="HyperlinkButton_Click" Content="{Binding UserName}" TargetName="_blank" ></HyperlinkButton> </DataTemplate> </data:DataGridTemplateColumn.CellTemplate> </data:DataGridTemplateColumn> 2) Now let us look at how we are getting this done by looking into HyperlinkButton_Click event handler. There we will dynamically set the NavigateUri to the twitter page. I tried to do this using some binding, eval like stuff as in ASP.NET, but no luck! private void HyperlinkButton_Click(object sender, RoutedEventArgs e) { HyperlinkButton hb = (HyperlinkButton)e.OriginalSource; hb.NavigateUri = new Uri("http://twitter.com/" + hb.Content.ToString(), UriKind.Absolute); } 3) Now we need to switch on our Timer right in the OnNavigated to event on our SL page. So we need to modify our OnNavigated event to some thing like below: protected override void OnNavigatedTo(NavigationEventArgs e) { image1.Source = new BitmapImage(new Uri(GlobalVariable.profileImage, UriKind.Absolute)); this.Title = GlobalVariable.getUserName() + " - Home"; if (!GlobalVariable.isLoggedin()) this.NavigationService.Navigate(new Uri("/Login", UriKind.Relative)); else { currentGrid = "Timeline-Grid"; TwitterCredentialsSubmit(); myDispatcherTimer.Interval = new TimeSpan(0, 0, 0, 60, 0); myDispatcherTimer.Tick += new EventHandler(Each_Tick); myDispatcherTimer.Start(); } } I use a global string – here it is currentGrid variable to indicate what is bound in the datagrid so that after every timer tick, I can rebind the latest data to it again. Like I will only rebind the friends timeline again if the data grid currently holds it and I’ll only rebind the respective list status again in the data grid, if already a list status is bound to the data grid. In the above timer code, its set to trigger the Each_Tick event handler every 1 minute (60 seconds). TimeSpan takes in (days, hours, minutes, seconds, milliseconds). 4) Now we need to set the list name in the currentGrid variable when a list button is clicked. So add the code line below to the list button event handler currentGrid = currentList = b.Content.ToString(); 5) Now let us see how Each_Tick event handler is implemented. public void Each_Tick(object o, EventArgs sender) { if (!currentGrid.Equals("Timeline-Grid")) getListStatuses(currentGrid); else { WebRequest.RegisterPrefix("https://", System.Net.Browser.WebRequestCreator.ClientHttp); WebClient myService = new WebClient(); myService.AllowReadStreamBuffering = true; myService.UseDefaultCredentials = false; myService.Credentials = new NetworkCredential(GlobalVariable.getUserName(), GlobalVariable.getPassword()); myService.DownloadStringCompleted += new DownloadStringCompletedEventHandler(TimelineRequestCompleted); myService.DownloadStringAsync(new Uri("https://twitter.com/statuses/friends_timeline.xml")); } } If the data grid hold friends timeline, I just use the same bit of code we had already to bind the friends timeline to the data grid. Copy Paste. But if it is some list timeline that is bound in the datagrid, I then call the getListStatus method with the currentGrid string which will actually be holding the list name. 6) I wanted to make the hyperlinks inside the status message as hyperlinks and when the user clicks on it, we can then open that link. I tried using a convertor and using a regex to recognize a url and wrap it up with a href, but that is not gonna work in silverlight textblock :( Anyways that convertor code is in the zip file. 7) You can get the complete project files from here. 8) Please comment below for your doubts, suggestions, improvements. I will try to reply as early as possible. Thanks for all your support. Technorati Tags: Silverlight 4,Datagrid,Twitter API,Silverlight Timer

  Read the article

• Unable to fix broken packages with sudo apt-get install -f

  - by Bob

  Here's my result, of sudo apt-get install -f. i have Ran it twice and got negative result. I believe there is an error at "error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English" This same statement "error in Version string, caused me three days of attempting to download version 12.04. There is a bug report concerning the quoted text as well. Is there anyway to download the version without the language packs, why would I corrupt version 11.10? Also, when attempting to download Synaptic using sudo apt-get install synaptic, I get the same error message. Again I point out the initial download problems and the same error message receipt. Thanks b0b@b0b-IC780M-A:~$ sudo apt-get install -f [sudo] password for b0b: Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get install -f Reading package lists... Done Building dependency tree Reading state information... Done 0 upgraded, 0 newly installed, 0 to remove and 298 not upgraded. b0b@b0b-IC780M-A:~$ sudo apt-get upgrade install Reading package lists... Done Building dependency tree Reading state information... Done The following packages have been kept back: linux-headers-generic software-center The following packages will be upgraded: accountsservice acpi-support acpid aisleriot alsa-utils app-install-data-partner appmenu-qt apport apport-gtk apt-transport-https apt-utils aptdaemon aptdaemon-data apturl apturl-common banshee banshee-extension-soundmenu banshee-extension-ubuntuonemusicstore baobab bind9-host binutils bluez-alsa bluez-cups bluez-gstreamer brasero brasero-cdrkit brasero-common checkbox checkbox-gtk command-not-found command-not-found-data compiz compiz-core compiz-gnome compiz-plugins-default compiz-plugins-main-default cups cups-bsd cups-client cups-common cups-ppdc deja-dup desktop-file-utils dnsutils empathy empathy-common eog evince evince-common evolution-data-server evolution-data-server-common file-roller firefox firefox-globalmenu firefox-gnome-support gbrainy gcalctool gconf2 gconf2-common gedit gedit-common ghostscript ghostscript-cups ghostscript-x gir1.2-atspi-2.0 gir1.2-gconf-2.0 gir1.2-gnomebluetooth-1.0 gir1.2-gtk-3.0 gir1.2-gtksource-3.0 gir1.2-totem-1.0 gir1.2-unity-4.0 gir1.2-webkit-3.0 gnome-accessibility-themes gnome-bluetooth gnome-control-center gnome-control-center-data gnome-desktop3-data gnome-font-viewer gnome-games-common gnome-icon-theme gnome-mahjongg gnome-online-accounts gnome-orca gnome-power-manager gnome-screenshot gnome-search-tool gnome-session gnome-session-bin gnome-session-canberra gnome-session-common gnome-settings-daemon gnome-sudoku gnome-system-log gnome-system-monitor gnome-utils-common gnomine gstreamer0.10-gconf gstreamer0.10-plugins-good gstreamer0.10-pulseaudio gvfs gvfs-backends gvfs-bin gvfs-fuse gwibber gwibber-service gwibber-service-facebook gwibber-service-identica gwibber-service-twitter hpijs hplip hplip-cups hplip-data indicator-datetime indicator-session indicator-sound isc-dhcp-client isc-dhcp-common jockey-common jockey-gtk language-selector-common language-selector-gnome libaccountsservice0 libapt-inst1.3 libarchive1 libasound2-plugins libatk-adaptor libbind9-60 libbrasero-media3-1 libcamel-1.2-29 libcanberra-gtk-module libcanberra-gtk0 libcanberra-gtk3-0 libcanberra-gtk3-module libcanberra-pulse libcanberra0 libdecoration0 libdns69 libebackend-1.2-1 libebook1.2-12 libecal1.2-10 libedata-book-1.2-11 libedata-cal-1.2-13 libedataserver1.2-15 libedataserverui-3.0-1 libevince3-3 libgconf2-4 libgnome-bluetooth8 libgnome-control-center1 libgnome-desktop-3-2 libgoa-1.0-0 libgrip0 libgs9 libgs9-common libgtk-3-bin libgtksourceview-3.0-0 libgtksourceview-3.0-common libgweather-3-0 libgweather-common libgwibber-gtk2 libgwibber2 libhpmud0 libimobiledevice2 libisc62 libisccc60 libisccfg62 libjasper1 liblightdm-gobject-1-0 liblwres60 libmetacity-private0 libmission-control-plugins0 libmono-zeroconf1.0-cil libnautilus-extension1 libnm-glib-vpn1 libnm-glib4 libnm-util2 libnotify0.4-cil libnux-1.0-0 libnux-1.0-common libpam-gnome-keyring libreoffice-emailmerge libreoffice-style-human libsane-hpaio libsmbclient libsnmp-base libsnmp15 libsyncdaemon-1.0-1 libt1-5 libtotem0 libubuntuone-1.0-1 libubuntuone1.0-cil libunity-2d-private0 libunity-core-4.0-4 libunity6 libusbmuxd1 libwbclient0 libwebkitgtk-1.0-0 libwebkitgtk-1.0-common libwebkitgtk-3.0-0 libwebkitgtk-3.0-common libxml2 linux-generic linux-image-generic metacity metacity-common mobile-broadband-provider-info modemmanager mousetweaks multiarch-support nautilus nautilus-data nautilus-sendto-empathy network-manager nux-tools onboard openssl pulseaudio pulseaudio-esound-compat pulseaudio-module-bluetooth pulseaudio-module-gconf pulseaudio-module-x11 pulseaudio-utils python-apport python-aptdaemon python-aptdaemon-gtk python-aptdaemon.gtk3widgets python-aptdaemon.gtkwidgets python-brlapi python-cups python-cupshelpers python-gobject-cairo python-httplib2 python-launchpadlib python-libxml2 python-pam python-papyon python-pkg-resources python-problem-report python-pyatspi2 python-software-properties python-ubuntuone-client python-ubuntuone-storageprotocol samba-common samba-common-bin seahorse shotwell simple-scan smbclient sni-qt software-properties-common software-properties-gtk sudo system-config-printer-common system-config-printer-gnome system-config-printer-udev telepathy-indicator telepathy-mission-control-5 thunderbird thunderbird-globalmenu thunderbird-gnome-support tomboy totem totem-common totem-mozilla totem-plugins ttf-opensymbol ubuntu-desktop ubuntu-minimal ubuntu-standard ubuntuone-client ubuntuone-client-gnome ubuntuone-couch unity unity-2d unity-2d-launcher unity-2d-panel unity-2d-places unity-2d-spread unity-common unity-lens-applications unity-services update-manager update-manager-core update-notifier update-notifier-common usbmuxd vim-common vim-tiny vinagre vino xorg xserver-xorg xserver-xorg-input-all xserver-xorg-video-all xserver-xorg-video-intel xserver-xorg-video-openchrome xul-ext-ubufox 296 upgraded, 0 newly installed, 0 to remove and 2 not upgraded. Need to get 0 B/159 MB of archives. After this operation, 10.1 MB of additional disk space will be used. Do you want to continue [Y/n]? y Extracting templates from packages: 100% Preconfiguring packages ... dpkg: error: parsing file '/var/lib/dpkg/available' near line 4131 package 'python-zope.interface': error in Version string '0:3.6.1-dates for language English Translation data updates for all supported packages for: English . language-pack-en-base provides the bulk of translation data and is updated only seldom. This package provides frequent translation updates.': version string has embedded spaces E: Sub-process /usr/bin/dpkg returned an error code (2) b0b@b0b-IC780M-A:~$

  Read the article

• Updating a database connection password using a script

  - by Tim Dexter

  An interesting customer requirement that I thought was worthy of sharing today. Thanks to James for the requirement and Bryan for the proposed solution and me for testing the solution and proving it works :0) A customers implementation of Sarbanes Oxley requires them to change all database account passwords every 90 days. This is scripted leveraging shell scripts today for most of their environments. But how can they manage the BI Publisher connections? Now, the customer is running 11g and therefore using weblogic on the middle tier, which is the first clue to Bryans proposed solution. To paraphrase and embellish Bryan's solution a little; why not use a JNDI connection from BIP to the database. Then employ the web logic scripting engine to make updates to the JNDI as needed? BIP is completely uninvolved and with a little 'timing' users will be completely unaware of the password updates i.e. change the password when reports are not being executed. Perfect! James immediately tracked down the WLST script that could be used here, http://middlewaremagic.com/weblogic/?p=4261 (thanks Ravish) Now it was just a case of testing the theory. Some steps: Create the JNDI connection in WLS Create the JNDI connection in BI Publisher pointing to the WLS connection Build new data models using or re-point data sources to use the JNDI connection. Create the WLST script to update the WLS JNDI password as needed. Test! Some details. Creating the JNDI connection in web logic is pretty straightforward. Log into hte console and look for Data Sources under the Services section of the home page and click it Click New >> Generic Datasource Give the connection a name. For the JNDI name, prefix it with 'jdbc/' so I have 'jdbc/localdb' - this name is important you'll need it on the BIP side. Select your db type - this will influence the drivers and information needed on the next page. Being a company man, Im using an Oracle db. Click Next Select the driver of choice, theres lots I know, you can read about them I just chose 'Oracle's Driver (Thin) for Instance connections; Versions 9.0.1 and later' Click Next >> Next Fill out the db name (SID), server, port, username to connect and password >> Next Test the config to ensure you can connect. >> Next Now you need to deploy the connection to your BI server, select it and click Next. You're done with the JNDI config. Creating the JNDI connection on the Publisher side is covered here. Just remember to the connection name you created in WLS e.g. 'jdbc/localdb' Not gonna tell you how to do this, go read the user guide :0) Suffice to say, it works. This requires a little reading around the subject to understand the scripting engine and how to execute scripts. Nicely covered here. However a bit of googlin' and I found an even easier way of running the script. ${ServerHome}/common/bin/wlst.sh updatepwd.py Where updatepwd.py is my script file, it can be in another directory. As part of the wlst.sh script your environment is set up for you so its very simple to execute. The nitty gritty: Need to take Ravish's script above and create a file with a .py extension. Its going to need some modification, as he explains on the web page, to make it work in your environment. I played around with it for a while but kept running into errors. The script as is, tries to loop through all of your connections and modify the user and passwords for each. Not quite what we are looking for. Remember our requirement is to just update the password for a given connection. I also found another issue with the script. WLS 10.x does not allow updates to passwords using clear type ie un-encrypted text while the server is in production mode. Its a bit much to set it back to developer mode bounce it, change the passwords and then bounce and then change back to production and bounce again. After lots of messing about I finally came up with the following: ############################################################################# # # Update password for JNDI connections # ############################################################################# print("*** Trying to Connect.... *****") connect('weblogic','welcome1','t3://localhost:7001') print("*** Connected *****") edit() startEdit() print ("*** Encrypt the password ***") en = encrypt('hr') print "Encrypted pwd: ", en print ("*** Changing pwd for LocalDB ***") dsName = 'LocalDB' print 'Changing Password for DataSource ', dsName cd('/JDBCSystemResources/'+dsName+'/JDBCResource/'+dsName+'/JDBCDriverParams/'+dsName) set('PasswordEncrypted',en) save() activate() Its pretty simple and you can expand on it to loop through the data sources and change each as needed. I have hardcoded the password into the file but you can pass it as a parameter as needed using the properties file method. Im not going to get into the detail of that here but its covered with an example here. Couple of points to note: 1. The change to the password requires a server bounce to get the changes picked up. You can add that to the shell script you will use to call the script above. 2. The script above needs to be run from the MW_HOME\user_projects\domains\bifoundation_domain directory to get the encryption libraries set correctly. My command to run the whole script was: d:\oracle\bi_mw\wlserver_10.3\common\bin\wlst.cmd updatepwd.py - where wlst.cmd is the scripting command line and updatepwd.py was my update password script above. I have not quite spoon fed everything you need to make it a robust script but at least you know you can do it and you can work out the rest I think :0)

  Read the article

• "Yes, but that's niche."

  - by Geertjan

  JavaOne 2012 has come to an end though it feels like it hasn't even started yet! What happened, time is a weird thing. Too many things to report on. James Gosling's appearance at the JavaOne community keynote was seen, by everyone (which is quite a lot) of people I talked to, as the highlight of the conference. It was interesting that the software for the Duke's Choice Award winning Liquid Robotics that James Gosling is now part of and came to talk about is a Swing application that uses the WorldWind libraries. It was also interesting that James Gosling pointed out to the conference: "There are things you can't do using HTML." That brings me to the wonderful counter argument to the above, which I spend my time running into a lot: "Yes, but that's niche." It's a killer argument, i.e., it kills all discussions completely in one fell swoop. Kind of when you're talking about someone and then this sentence drops into the conversation: "Yes, but she's got cancer now." Here's one implementation of "Yes, but that's niche": Person A: All applications are moving to the web, tablet, and mobile phone. That's especially true now with HTML5, which is going to wipe away everything everywhere and all applications are going to be browser based. Person B: What about air traffic control applications? Will they run on mobile phones too? And do you see defence applications running in a browser? Don't you agree that there are multiple scenarios imaginable where the Java desktop is the optimal platform for running applications? Person A: Yes, but that's niche. Here's another implementation, though it contradicts the above [despite often being used by the same people], since JavaFX is a Java desktop technology: Person A: Swing is dead. Everyone is going to be using purely JavaFX and nothing else. Person B: Does JavaFX have a docking framework and a module system? Does it have a plugin system?  These are some of the absolutely basic requirements of Java desktop software once you get to high end systems, e.g., banks, defence force, oil/gas services. Those kinds of applications need a web browser and so they love the JavaFX WebView component and they also love the animated JavaFX charting components. But they need so much more than that, i.e., an application framework. Aren't there requirements that JavaFX isn't meeting since it is a UI toolkit, just like Swing is a UI toolkit, and what they have in common is their lack, i.e., natively, of any kind of application framework? Don't people need more than a single window and a monolithic application structure? Person A: Yes, but that's niche. In other words, anything that doesn't fit within the currently dominant philosophy is "niche", for no other reason than that it doesn't fit within the currently dominant philosophy... regardless of the actual needs of real developers. Saying "Yes, but that's niche", kills the discussion completely, because it relegates one side of the conversation to the arcane and irrelevant corners of the universe. You're kind of like Cobol now, as soon as "Yes, but that's niche" is said. What's worst about "Yes, but that's niche" is that it doesn't enter into any discussion about user requirements, i.e., there's so few that need this particular solution that we don't even need to talk about them anymore. Note, of course, that I'm not referring specifically or generically to anyone or anything in particular. Just picking up from conversations I've picked up on as I was scurrying around the Hilton's corridors while looking for the location of my next presentation over the past few days. It does, however, mean that there were people thinking "Yes, but that's niche" while listening to James Gosling pointing out that HTML is not the be-all and end-all of absolutely everything. And so this all leaves me wondering: How many applications must be part of a niche for the niche to no longer be a niche? And what if there are multiple small niches that have the same requirements? Don't all those small niches together form a larger whole, one that should be taken seriously, i.e., a whole that is not a niche?

  Read the article

• Agile Executives

  - by Robert May

  Over the years, I have experienced many different styles of software development. In the early days, most of the development was Waterfall development. In the last few years, I’ve become an advocate of Scrum. As I talked about last month, many people have misconceptions about what Scrum really is. The reason why we do Scrum at Veracity is because of the difference it makes in the life of the team doing Scrum. Software is for people, and happy motivated people will build better software. However, not all executives understand Scrum and how to get the information from development teams that use Scrum. I think that these executives need a support system for managing Agile teams. Historical Software Management When Henry Ford pioneered the assembly line, I doubt he realized the impact he’d have on Management through the ages. Historically, management was about managing the process of building things. The people were just cogs in that process. Like all cogs, they were replaceable. Unfortunately, most of the software industry followed this same style of management. Many of today’s senior managers learned how to manage companies before software was a significant influence on how the company did business. Software development is a very creative process, but too many managers have treated it like an assembly line. Idea’s go in, working software comes out, and we just have to figure out how to make sure that the ideas going in are perfect, then the software will be perfect. Lean Manufacturing In the manufacturing industry, Lean manufacturing has revolutionized Henry Ford’s assembly line. Derived from the Toyota process, Lean places emphasis on always providing value for the customer. Anything the customer wouldn’t be willing to pay for is wasteful. Agile is based on similar principles. We’re building software for people, and anything that isn’t useful to them doesn’t add value. Waterfall development would have teams build reams and reams of documentation about how the software should work. Agile development dispenses with this work because excessive documentation doesn’t add value. Instead, teams focus on building documentation only when it truly adds value to the customer. Many other Agile principals are similar. Playing Catch-up Just like in the manufacturing industry, many managers in the software industry have yet to understand the value of the principles of Lean and Agile. They think they can wrap the uncertainties of software development up in a nice little package and then just execute, usually followed by failure. They spend a great deal of time and money trying to exactly predict the future. That expenditure of time and money doesn’t add value to the customer. Managers that understand that Agile know that there is a better way. They will instead focus on the priorities of the near term in detail, and leave the future to take care of itself. They have very detailed two week plans with less detailed quarterly plans. These plans are guided by a general corporate strategy that doesn’t focus on the exact implementation details. These managers also think in smaller features rather than large functionality. This adds a great deal of value to customers, since the features that matter most are the ones that the team focuses on in the near term and then are able to deliver to the customers that are paying for them. Agile managers also realize that stale software is very costly. They know that keeping the technology in their software current is much less expensive and risky than large rewrites that occur infrequently and schedule time in each release for refactoring of the existing software. Agile Executives Even though Agile is a better way, I’ve still seen failures using the Agile process. While some of these failures can be attributed to the team, most of them are caused by managers, not the team. Managers fail to understand what Agile is, how it works, and how to get the information that they need to make good business decisions. I think this is a shame. I’m very pleased that Veracity understands this problem and is trying to do something about it. Veracity is a key sponsor of Agile Executives. In fact, Galen is this year’s acting president for Agile Executives. The purpose of Agile Executives is to help managers better manage Agile teams and see better success. Agile Executives is trying to build a community of executives that range from managers interested in Agile to managers that have successfully adopted Agile. Together, these managers can form a community of support and ideas that will help make Agile teams more successful. Helping Your Team You can help too! Talk with your manager and get them involved in Agile Executives. Help Veracity build the community. If your manager understands Agile better, he’ll understand how to help his teams, which will result in software that adds more value for customers. If you have any questions about how you can be involved, please let me know. Technorati Tags: Agile,Agile Executives

  Read the article

• Xobni Plus for Outlook [Review]

  - by The Geek

  Overview Xobni Plus is an addin that will bring a sidebar to Outlook which allows you to search through your inbox and contacts a lot easier. It provides the ability to search and keep track of your favorite social networks. Searching with Xobni is a lot more powerful than the default search feature in Outlook. It let’s you drill down your searches to conversations, email, links, and attachments. It now supports Outlook 2010 both 32 & 64-bit versions. Installation & Setup Installation is easy following the wizard. After completing the wizard you can tell you’re friends on Facebook and Twitter that you are now using it. You can also decide to join their Product Improvement Program if you want. After installation when you open Outlook, Xobni appears as a sidebar on the right side. Don’t worry about it always being in the way, as you can hide it if you need more room for other Outlook functions. After Xobni free is installed, you can upgrade to the Plus version at any time. A new window will open up and you can use your Credit Card, PayPal, or redeem a code if you have one. Features & Use Where to begin with the amount of features available in Xobni Plus? It really has an amazing amount of cool features. Of course you’ll have all of the features of the Free Version which we previously covered…and a lot more. After Xobni is installed you’ll notice a section for it on the Ribbon. From here you can search Xobni, show or hide the Sidebar, and change other options. It allows you to easily keep up with various social networks like Facebook, Twitter, and LinkedIn… Check out email analytics and contact ranks. Click on the Files Exchanged tab to search for specific attachments. Quickly search links exchanged with your contacts. Hover over a link to get a preview of what it entails. It gives you the ability to index all of your Yahoo mail as well, without the need for purchasing Yahoo Plus! Then your Yahoo messages appear in the Xobni sidebar. When you select a contact you can see related messages from you Yahoo account. Easily index all of your mail…including Yahoo mail for better organization and faster search results. There are several options you can select to change the way Xobni works. From setting up your Yahoo email, Indexing options, and much more. Additional Features of Xobni Plus Advanced Search Capabilities – Filter results, Boolean & Phrase Search, Ability to search Appointments & Tasks, Advanced Search Builder Search unlimited PST data files Xobni contacts in the compose screen Find links exchanged with your contacts View calendar appointments One year premium tech support No Ads! Performance We ran Xobni Plus on Outlook 2010 32-bit on a Dual-Core AMD Athlon system with 4GB of RAM and found it to run quite smoothly. However, we did notice it would sometimes slow down launching Outlook, especially if other apps are running at the same time. Product Support When you buy a license for Xobni Plus you get a full year of premium tech support. They provide a Questions and Answers page on their site where you can run a search query and answers appear instantly. You can contact support directly as a Plus member through their web form and they advise the turn around time is 2 business days. However, when we tested it, we received a response within 24 hours. They also provide FAQ, Community forum, and you can download the Owners Manual in PDF format from the support page. Conclusion Xobni Plus is a very powerful addin for Outlook and includes a lot more features that we didn’t cover in this review. You can download Xobni free edition which includes an 8 day free trial of the Plus version. This provides a good way to start getting familiar with it. Then upgrade to Xobni Plus at any time for $29.95. Once you get started, you’ll find the sidebar is nicely laid out and intuitive to use. If you live out of Outlook during the day, Xobni Plus is a great addition for fast and powerful searches. It provides an easy way to keep all of your contacts and messages well organized and easy to find. Xobni Plus works with XP, Vista, and Windows 7 (32 & 64-bit editions) Outlook 2003, 2007 and both 32 & 64-bit editions of Outlook 2010. Download Xobni Plus Download Xobni Free Edition Rating Installation: 8 Ease of Use: 8 Features: 9 Performance: 8 Product Support: 8 Similar Articles Productive Geek Tips Xobni Free Powers Up Outlook’s Search and ContactsCreate an Email Template in Outlook 2003Add Social Elements to Your Gmail Contacts with RapportiveChange Outlook Startup FolderClear Outlook Searches and MRU (Most Recently Used) Lists TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides

  Read the article

• SQL SERVER – Weekly Series – Memory Lane – #004

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Gamification at OOW

  - by erikanollwebb

  Last week was Oracle OpenWorld, and for those of you not in tech or downtown San Francisco, that might not mean a whole lot.  However, if you are familiar with it, Oracle OpenWorld is our premier customer event.  This year, more than 50,000 people attended.  It's not a good week to visit San Francisco on vacation because Oracle customers take over all the hotels in town!  It was crazy, but a lot of fun and it's a great opportunity for the Apps UX group to do customer research with a range of customers.  This year, more than 100+ customers and partners took the time to team up with our UX experts and provide feedback on new designs and ideas. Over three days,  UX teams conducted 8  one-on-one user feedback sessions, 4 focus groups and 7 surveys. In addition, we conducted a voice capture activity and were able to collect close to 70 speech samples at the lab and DEMOgrounds. This was a great opportunity for us to do some testing on some specific gamification concepts with a set of business analysts.  We pulled in 8 folks for a focus group on gamification concepts and whether they thought those would work for their teams. To get ready for this, my designer extraordinaire, Andrea Cantú, flew into town and we spent almost a week locked in a room together brainstorming design ideas.  We killed a few trees trying to get all of our concepts and other examples together in the process, but in the end, we put together a whole series of examples of how you might gamify an Oracle app (in this case, CRM).  Andrea is a genius for this kind of thing and the comps she created looked great.  Here's a picture of her hard at work!  We also had the good fortune to have my boss, Laurie Pattison and my usability contractor, Shobana Subramanian there to note take and observe as well.  Here's a few shots of us, hard at work preparing for the day (or checking out something on Laurie's iPhone...) To start things off, we gave an overview of gamification and I talked about what it's used for.  Then we gave the participants a scenario about our sales person and what we were trying to get her to do. It was a great opportunity to highlight what our business goals might be and why we might want to add game mechanics.  It was also a good way to get them thinking about how that might work for them in their environments and workplaces. There were some surprises for the day.  We asked how many of them were already familiar with the concept of gamification--only two people had heard of it and only one was using game mechanics in his work.  That's in contrast to a survey we just ran internally with folks in a dev org where almost 50% of about 450 respondents had heard of gamification.  As we discussed the ways game mechanics could be used, it became clear that many of the folks had seen some game mechanics in action but didn't know that's what they were.  We also noticed that the folks in this group felt that if they were trying to sell the concept in their orgs, they wouldn't call it gamification.  That's not a huge surprise to me--they said what we've heard in the past, that gamification does not seem like a serious term for enterprise software.  They said they'd sell it with the goals--as a means to increase behaviors by rewarding users for activities.  It's a funny problem.  The word puts some folks off, but at the same time, I haven't seen another one word description that quite captures the range of things that "gamification" can cover.  My guess is that the more mainstream the term becomes, the more desensitized we'll become to the idea the it's trivializing enterprise software in some way.  Still, it was interesting to note that this group still felt that they would not take this concept to their bosses or teams and call it "gamification".  They focused on the goals, and how we could incentivize desired behaviors with game mechanics.  As I have already stated in other posts, I feel like my org is more receptive to discussing how this is just a more transparent type of usability and user experience methods than talking about gamification.  That's the argument they said they would use. All in all, it was a good session.  I love getting to talk to customers, present ideas and concepts, and get their feedback and input.  It's the type of thing that really helps drive our designs and keeps us grounded in what our customers need/want.  We're already planning where to get more feedback opportunities in the coming months. 

  Read the article

• When is my View too smart?

  - by Kyle Burns

  In this posting, I will discuss the motivation behind keeping View code as thin as possible when using patterns such as MVC, MVVM, and MVP.  Once the motivation is identified, I will examine some ways to determine whether a View contains logic that belongs in another part of the application.  While the concepts that I will discuss are applicable to most any pattern which favors a thin View, any concrete examples that I present will center on ASP.NET MVC. Design patterns that include a Model, a View, and other components such as a Controller, ViewModel, or Presenter are not new to application development.  These patterns have, in fact, been around since the early days of building applications with graphical interfaces.  The reason that these patterns emerged is simple – the code running closest to the user tends to be littered with logic and library calls that center around implementation details of showing and manipulating user interface widgets and when this type of code is interspersed with application domain logic it becomes difficult to understand and much more difficult to adequately test.  By removing domain logic from the View, we ensure that the View has a single responsibility of drawing the screen which, in turn, makes our application easier to understand and maintain. I was recently asked to take a look at an ASP.NET MVC View because the developer reviewing it thought that it possibly had too much going on in the view.  I looked at the .CSHTML file and the first thing that occurred to me was that it began with 40 lines of code declaring member variables and performing the necessary calculations to populate these variables, which were later either output directly to the page or used to control some conditional rendering action (such as adding a class name to an HTML element or not rendering another element at all).  This exhibited both of what I consider the primary heuristics (or code smells) indicating that the View is too smart: Member variables – in general, variables in View code are an indication that the Model to which the View is being bound is not sufficient for the needs of the View and that the View has had to augment that Model.  Notable exceptions to this guideline include variables used to hold information specifically related to rendering (such as a dynamically determined CSS class name or the depth within a recursive structure for indentation purposes) and variables which are used to facilitate looping through collections while binding. Arithmetic – as with member variables, the presence of arithmetic operators within View code are an indication that the Model servicing the View is insufficient for its needs.  For example, if the Model represents a line item in a sales order, it might seem perfectly natural to “normalize” the Model by storing the quantity and unit price in the Model and multiply these within the View to show the line total.  While this does seem natural, it introduces a business rule to the View code and makes it impossible to test that the rounding of the result meets the requirement of the business without executing the View.  Within View code, arithmetic should only be used for activities such as incrementing loop counters and calculating element widths. In addition to the two characteristics of a “Smart View” that I’ve discussed already, this View also exhibited another heuristic that commonly indicates to me the need to refactor a View and make it a bit less smart.  That characteristic is the existence of Boolean logic that either does not work directly with properties of the Model or works with too many properties of the Model.  Consider the following code and consider how logic that does not work directly with properties of the Model is just another form of the “member variable” heuristic covered earlier: @if(DateTime.Now.Hour < 12) {     <div>Good Morning!</div> } else {     <div>Greetings</div> } This code performs business logic to determine whether it is morning.  A possible refactoring would be to add an IsMorning property to the Model, but in this particular case there is enough similarity between the branches that the entire branching structure could be collapsed by adding a Greeting property to the Model and using it similarly to the following: <div>@Model.Greeting</div> Now let’s look at some complex logic around multiple Model properties: @if (ModelPageNumber + Model.NumbersToDisplay == Model.PageCount         || (Model.PageCount != Model.CurrentPage             && !Model.DisplayValues.Contains(Model.PageCount))) {     <div>There's more to see!</div> } In this scenario, not only is the View code difficult to read (you shouldn’t have to play “human compiler” to determine the purpose of the code), but it also complex enough to be at risk for logical errors that cannot be detected without executing the View.  Conditional logic that requires more than a single logical operator should be looked at more closely to determine whether the condition should be evaluated elsewhere and exposed as a single property of the Model.  Moving the logic above outside of the View and exposing a new Model property would simplify the View code to: @if(Model.HasMoreToSee) {     <div>There’s more to see!</div> } In this posting I have briefly discussed some of the more prominent heuristics that indicate a need to push code from the View into other pieces of the application.  You should now be able to recognize these symptoms when building or maintaining Views (or the Models that support them) in your applications.

  Read the article

• Atheros Wireless card shows up as two different models?

  - by geermc4

  Hi I've been fighting these wireless drivers for a few days and just recently i noticed that the model the Wireless controller appears in lspci is different sometimes. This is the data i have after installing Ubuntu Server 64 bit ~# lspci -k .... 04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01) Subsystem: AzureWave Device 1d89 Kernel driver in use: ath9k Kernel modules: ath9k ran some updates, restarted, all was good, all though it did say that linux-headers-server linux-image-server linux-server where beeing kept back. After that i installed ubuntu-desktop (aptitude install ubuntu-desktop --without-recommends) restarted and not only is the wireless not working anymore, but the hardware is listed as a different card ~# lspci -k .... 04:00.0 Ethernet controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) has no available drivers for it, still i tried to modprobe ath9k, they show up in lsmod as loaded, but still iw list shows nothing. this is what it looked like before the ubuntu-desktop instalation Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (14.0 dBm) * 2417 MHz [2] (15.0 dBm) * 2422 MHz [3] (15.0 dBm) * 2427 MHz [4] (15.0 dBm) * 2432 MHz [5] (15.0 dBm) * 2437 MHz [6] (15.0 dBm) * 2442 MHz [7] (15.0 dBm) * 2447 MHz [8] (15.0 dBm) * 2452 MHz [9] (15.0 dBm) * 2457 MHz [10] (15.0 dBm) * 2462 MHz [11] (15.0 dBm) * 2467 MHz [12] (15.0 dBm) (passive scanning) * 2472 MHz [13] (14.0 dBm) (passive scanning) * 2484 MHz [14] (17.0 dBm) (passive scanning) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor interface combinations are not supported Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS. What's with the hardware change? If it has 2, how can i make the AR9285 always load and disable AR5008, or, is it the same and it's just showing it different? :| Oh and I've tried this on Ubuntu 10.04 server, xubuntu 12.04, ubuntu 12.04 desktop and server. Thanks in advanced. -- Here's some more info, i have it setup in 2 hard drives, 1 works and the other one i'm using to figure it out The one that works... # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.147 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 01 serial: 74:2f:68:4a:26:73 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-18-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:fea00000-fea0ffff Here's where it doesn't # lshw -class network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: 06 serial: 54:04:a6:a3:3b:96 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.2.160 latency=0 link=yes multicast=yes port=MII speed=1Gbit/s resources: irq:43 ioport:e000(size=256) memory:d0004000-d0004fff memory:d0000000-d0003fff *-network UNCLAIMED description: Ethernet controller product: AR5008 Wireless Network Adapter vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fea00000-fea0ffff Update I've noticed that if i blacklist the ath9k and ath9k_common modules lspci gives me the AR9285, but then I need to modprobe ath9k for it to work, does this make any sense? If so, why?

  Read the article

• Changing the Game: Why Oracle is in the IT Operations Management Business

  - by DanKoloski

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif"; mso-bidi-font-family:"Times New Roman";} Next week, in Orlando, is the annual Gartner IT Operations Management Summit. Oracle is a premier sponsor of this annual event, which brings together IT executives for several days of high level talks about the state of operational management of enterprise IT. This year, Sushil Kumar, VP Product Strategy and Business Development for Oracle’s Systems & Applications Management, will be presenting on the transformation in IT Operations required to support enterprise cloud computing. IT Operations transformation is an important subject, because year after year, we hear essentially the same refrain – large enterprises spend an average of two-thirds (67%!) of their IT resources (budget, energy, time, people, etc.) on running the business, with far too little left over to spend on growing and transforming the business (which is what the business actually needs and wants). In the thirtieth year of the distributed computing revolution (give or take, depending on how you count it), it’s amazing that we have still not moved the needle on the single biggest component of enterprise IT resource utilization. Oracle is in the IT Operations Management business because when management is engineered together with the technology under management, the resulting efficiency gains can be truly staggering. To put it simply – what if you could turn that 67% of IT resources spent on running the business into 50%? Or 40%? Imagine what you could do with those resources. It’s now not just possible, but happening. This seems like a simple idea, but it is a radical change from “business as usual” in enterprise IT Operations. For the last thirty years, management has been a bolted-on afterthought – we pick and deploy our technology, then figure out how to manage it. This pervasive dysfunction is a broken cycle that guarantees high ongoing operating costs and low agility. If we want to break the cycle, we need to take a more tightly-coupled approach. As a complete applications-to-disk platform provider, Oracle is engineering management together with technology across our stack and hooking that on-premise management up live to My Oracle Support. Let’s examine the results with just one piece of the Oracle stack – the Oracle Database. Oracle began this journey with the Oracle Database 9i many years ago with the introduction of low-impact instrumentation in the database kernel (“tell me what’s wrong”) and through Database 10g, 11g and 11gR2 has successively added integrated advisory (“tell me how to fix what’s wrong”) and lifecycle management and automated self-tuning (“fix it for me, and do it on an ongoing basis for all my assets”). When enterprises take advantage of this tight-coupling, the results are game-changing. Consider the following (for a full list of public references, visit this link): British Telecom improved database provisioning time 1000% (from weeks to minutes) which allows them to provide a new DBaaS service to their internal customers with no additional resources Cerner Corporation Saved $9.5 million in CapEx and OpEx AND launched a brand-new cloud business at the same time Vodafone Group plc improved response times 50% and reduced maintenance planning times 50-60% while serving 391 million registered mobile customers Or the recent Database Manageability and Productivity Cost Comparisons: Oracle Database 11g Release 2 vs. SAP Sybase ASE 15.7, Microsoft SQL Server 2008 R2 and IBM DB2 9.7 as conducted by independent analyst firm ORC. In later entries, we’ll discuss similar results across other portions of the Oracle stack and how these efficiency gains are required to achieve the agility benefits of Enterprise Cloud. Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Poor Customer Service Example

  - by MightyZot

  Lately I have been frustrated by examples of poor customer service. At least one is worth writing about because I don’t think companies realize the effects of their service policies on loyal customers. Bad Customer Service Example #1 Recently, I received an offer in the mail from my cable company, suddenLink. The offer was for an updated TiVo for $12/mo. Normally I ignore offers like this one because I already have the service they’re offering and many times advertisers are offering alternatives to what is already an excellent product offering. I tend to exhibit a high level of loyalty to the products and brands that I use. In this case, we were looking to upgrade our TiVo and this deal is attractive for several reasons: I don’t want to pay a huge amount up-front for the device, so paying a monthly amount for the device is attractive to me. My entertainment is almost all on a single invoice. I’m no longer going to be billed by suddenLink and TiVo. TiVo is still involved, so I am still loyal to the brand I love. I have resisted moving to other DVRs and services for over a decade. I called suddenLink to order the new TiVo and was rewarded with great customer service. In fact, I can’t remember ever getting poor customer service from suddenLink. They are always there to answer my technical support questions and they are very responsive to outages. Then I called TiVo. First of all, I chose the option on the phone system to change or cancel my service, which was consequently met by an inordinate hold time. (I’m calling this time inordinate because I get through very quickly if I want to purchase something.) This is a trend that I’ve noticed with companies – if you want me to be loyal to you, it should be just as easy to cancel your service as it is to purchase it. Because, I should never be cancelling because I am unhappy. And, if you ever want my business again, or more importantly a reference, then you’d better make the exit door open just as easy as the enter door. After quite some time on hold, I talked to “Victor” who was very courteous. Victor canceled my service and then told me that I could keep my current TiVo and transfer recorded programs to it from the new TiVo.  Cool I said, but what about the cost?  He said there was no extra cost.  This was also attractive to me because I paid for my TiVo and it would be good to use it for something at least.  That was four months ago. This month I noticed that TiVo was still charging me for my original service. I was a little upset, but I decided to give them the benefit of the doubt. After all, I am a loyal TiVo customer and I have resisted moving to other solutions for over a decade. I’m sure they will do whatever it takes to keep my business, through TiVo or through suddenLink. After quite some time on hold, I was able to talk to a customer service representative, “Les”. I explained that I am a loyal TiVo customer, but I purchased this deal through my cable provider. I’m still with TiVo, I just wanted a single bill and to take advantage of the pay-over-time option. “Les” told me that he was very sorry to hear that I’m leaving TiVo, to which I responded again that I wasn’t leaving TiVo, I just want one invoice, and to take advantage of the pay-over-time. So, after explaining that I requested a termination of the non-suddenLink account (TiVo can see both of course), I was put on hold again for quite some time while my refund was “approved”.  “Les” said that he could see my cancellation request back in July. Note that it is now November, so they have billed me inappropriately four times. After quite some time, he came back on the line and told me that he was able to “get me most of my money back.” He got approval to refund 90 days. Even though I requested cancellation of one of my accounts, TiVo has that cancellation request on file and they admit overbilling me, I am going to get “most” of my money back. To top this experience off, when we were ready to hang up, “Les” told me that he was sorry to see me go and that he hoped I would come back to TiVo again. Again, I explained to “Les” that I have not left TiVo. I am just paying them through suddenLink. At that point, he went into a small dissertation about how this is a special arrangement they have with suddenLink and very few others. He made me feel like I was doing something wrong. Why should I feel that way? TiVo made the deal with suddenLink, not me, and the deal seemed like a good compromise for me to be able to get what I need. Here is what TiVo Customer Service accomplished on those two calls – I no longer feel like I need to be loyal to the TiVo brand or service. If I had been treated better on these two calls, I would still be recommending TiVo to my friends. They would still be getting revenue from a loyal customer, who paid the same rate for over a decade, and this article wouldn’t be here for you to read. Interesting… In my opinion, if you want brand loyalty, be loyal to your customers!

  Read the article

• Ransomware: Why This New Malware is So Dangerous and How to Protect Yourself

  - by Chris Hoffman

  Ransomware is a type of malware that tries to extort money from you. One of the nastiest examples, CryptoLocker, takes your files hostage and holds them for ransom, forcing you to pay hundreds of dollars to regain access. Most malware is no longer created by bored teenagers looking to cause some chaos. Much of the current malware is now produced by organized crime for profit and is becoming increasingly sophisticated. How Ransomware Works Not all ransomware is identical. The key thing that makes a piece of malware “ransomware” is that it attempts to extort a direct payment from you. Some ransomware may be disguised. It may function as “scareware,” displaying a pop-up that says something like “Your computer is infected, purchase this product to fix the infection” or “Your computer has been used to download illegal files, pay a fine to continue using your computer.” In other situations, ransomware may be more up-front. It may hook deep into your system, displaying a message saying that it will only go away when you pay money to the ransomware’s creators. This type of malware could be bypassed via malware removal tools or just by reinstalling Windows. Unfortunately, Ransomware is becoming more and more sophisticated. One of the latest examples, CryptoLocker, starts encrypting your personal files as soon as it gains access to your system, preventing access to the files without knowing the encryption key. CryptoLocker then displays a message informing you that your files have been locked with encryption and that you have just a few days to pay up. If you pay them $300, they’ll hand you the encryption key and you can recover your files. CryptoLocker helpfully walks you through choosing a payment method and, after paying, the criminals seem to actually give you a key that you can use to restore your files. You can never be sure that the criminals will keep their end of the deal, of course. It’s not a good idea to pay up when you’re extorted by criminals. On the other hand, businesses that lose their only copy of business-critical data may be tempted to take the risk — and it’s hard to blame them. Protecting Your Files From Ransomware This type of malware is another good example of why backups are essential. You should regularly back up files to an external hard drive or a remote file storage server. If all your copies of your files are on your computer, malware that infects your computer could encrypt them all and restrict access — or even delete them entirely. When backing up files, be sure to back up your personal files to a location where they can’t be written to or erased. For example, place them on a removable hard drive or upload them to a remote backup service like CrashPlan that would allow you to revert to previous versions of files. Don’t just store your backups on an internal hard drive or network share you have write access to. The ransomware could encrypt the files on your connected backup drive or on your network share if you have full write access. Frequent backups are also important. You wouldn’t want to lose a week’s worth of work because you only back up your files every week. This is part of the reason why automated back-up solutions are so convenient. If your files do become locked by ransomware and you don’t have the appropriate backups, you can try recovering them with ShadowExplorer. This tool accesses “Shadow Copies,” which Windows uses for System Restore — they will often contain some personal files. How to Avoid Ransomware Aside from using a proper backup strategy, you can avoid ransomware in the same way you avoid other forms of malware. CryptoLocker has been verified to arrive through email attachments, via the Java plug-in, and installed on computers that are part of the Zeus botnet. Use a good antivirus product that will attempt to stop ransomware in its tracks. Antivirus programs are never perfect and you could be infected even if you run one, but it’s an important layer of defense. Avoid running suspicious files. Ransomware can arrive in .exe files attached to emails, from illicit websites containing pirated software, or anywhere else that malware comes from. Be alert and exercise caution over the files you download and run. Keep your software updated. Using an old version of your web browser, operating system, or a browser plugin can allow malware in through open security holes. If you have Java installed, you should probably uninstall it. For more tips, read our list of important security practices you should be following. Ransomware — CryptoLocker in particular — is brutally efficient and smart. It just wants to get down to business and take your money. Holding your files hostage is an effective way to prevent removal by antivirus programs after it’s taken root, but CryptoLocker is much less scary if you have good backups. This sort of malware demonstrates the importance of backups as well as proper security practices. Unfortunately, CryptoLocker is probably a sign of things to come — it’s the kind of malware we’ll likely be seeing more of in the future.     

  Read the article

• Windows for IoT, continued

  - by Valter Minute

  Originally posted on: http://geekswithblogs.net/WindowsEmbeddedCookbook/archive/2014/08/05/windows-for-iot-continued.aspxI received many interesting feedbacks on my previous blog post and I tried to find some time to do some additional tests. Bert Kleinschmidt pointed out that pins 2,3 and 10 of the Galileo are connected directly to the SOC, while pin 13, the one used for the sample sketch is controlled via an I2C I/O expander. I changed my code to use pin 2 instead of 13 (just changing the variable assignment at the beginning of the code) and latency was greatly reduced. Now each pulse lasts for 1.44ms, 44% more than the expected time, but ways better that the result we got using pin 13. I also used SetThreadPriority to increase the priority of the thread that was running the sketch to THREAD_PRIORITY_HIGHEST but that didn't change the results. When I was using the I2C-controlled pin I tried the same and the timings got ways worse (increasing more than 10 times) and so I did not commented on that part, wanting to investigate the issua a bit more in detail. It seems that increasing the priority of the application thread impacts negatively the I2C communication. I tried to use also the Linux-based implementation (using a different Galileo board since the one provided by MS seems to use a different firmware) and the results of running the sample blink sketch modified to use pin 2 and blink the led for 1ms are similar to those we got on the same board running Windows. Here the difference between expected time and measured time is worse, getting around 3.2ms instead of 1 (320% compared to 150% using Windows but far from the 100.1% we got with the 8-bit Arduino). Both systems were not under load during the test, maybe loading some applications that use part of the CPU time would make those timings even less reliable, but I think that those numbers are enough to draw some conclusions. It may not be worth running a full OS if what you need is Arduino compatibility. The Arduino UNO is probably the best Arduino you can find to perform this kind of development. The Galileo running the Linux-based stack or running Windows for IoT is targeted to be a platform for "Internet of Things" devices, whatever that means. At the moment I don't see the "I" part of IoT. We have low level interfaces (SPI, I2C, the GPIO pins) that can be used to connect sensors but the support for connectivity is limited and the amount of work required to deliver some data to the cloud (using a secure HTTP request or a message queuing system like APMQS or MQTT) is still big and the rich OS underneath seems to not provide any help doing that.Why should I use sockets and can't access all the high level connectivity features we have on "full" Windows?I know that it's possible to use some third party libraries, try to build them using the Windows For IoT SDK etc. but this means re-inventing the wheel every time and can also lead to some IP concerns if used for products meant to be closed-source. I hope that MS and Intel (and others) will focus less on the "coolness" of running (some) Arduino sketches and more on providing a better platform to people that really want to design devices that leverage internet connectivity and the cloud processing power to deliver better products and services. Providing a reliable set of connectivity services would be a great start. Providing support for .NET would be even better, leaving native code available for hardware access etc. I know that those components may require additional storage and memory etc. So making the OS componentizable (or, at least, provide a way to install additional components) would be a great way to let developers pick the parts of the system they need to develop their solution, knowing that they will integrate well together. I can understand that the Arduino and Raspberry Pi* success may have attracted the attention of marketing departments worldwide and almost any new development board those days is promoted as "XXX response to Arduino" or "YYYY alternative to Raspberry Pi", but this is misleading and prevents companies from focusing on how to deliver good products and how to integrate "IoT" features with their existing offer to provide, at the end, a better product or service to their customers. Marketing is important, but can't decide the key features of a product (the OS) that is going to be used to develop full products for end customers integrating it with hardware and application software. I really like the "hackable" nature of open-source devices and like to see that companies are getting more and more open in releasing information, providing "hackable" devices and supporting developers with documentation, good samples etc. On the other side being able to run a sketch designed for an 8 bit microcontroller on a full-featured application processor may sound cool and an easy upgrade path for people that just experimented with sensors etc. on Arduino but it's not, in my humble opinion, the main path to follow for people who want to deliver real products.   *Shameless self-promotion: if you are looking for a good book in Italian about the Raspberry Pi , try mine: http://www.amazon.it/Raspberry-Pi-alluso-Digital-LifeStyle-ebook/dp/B00GYY3OKO

  Read the article

• Unexpected advantage of Engineered Systems

  - by user12244672

  It's not surprising that Engineered Systems accelerate the debugging and resolution of customer issues. But what has surprised me is just how much faster issue resolution is with Engineered Systems such as SPARC SuperCluster. These are powerful, complex, systems used by customers wanting extreme database performance, app performance, and cost saving server consolidation. A SPARC SuperCluster consists or 2 or 4 powerful T4-4 compute nodes, 3 or 6 extreme performance Exadata Storage Cells, a ZFS Storage Appliance 7320 for general purpose storage, and ultra fast Infiniband switches.  Each with its own firmware. It runs Solaris 11, Solaris 10, 11gR2, LDoms virtualization, and Zones virtualization on the T4-4 compute nodes, a modified version of Solaris 11 in the ZFS Storage Appliance, a modified and highly tuned version of Oracle Linux running Exadata software on the Storage Cells, another Linux derivative in the Infiniband switches, etc. It has an Infiniband data network between the components, a 10Gb data network to the outside world, and a 1Gb management network. And customers can run whatever middleware and apps they want on it, clustered in whatever way they want. In one word, powerful.  In another, complex. The system is highly Engineered.  But it's designed to run general purpose applications. That is, the physical components, configuration, cabling, virtualization technologies, switches, firmware, Operating System versions, network protocols, tunables, etc. are all preset for optimum performance and robustness. That improves the customer experience as what the customer runs leverages our technical know-how and best practices and is what we've tested intensely within Oracle. It should also make debugging easier by fixing a large number of variables which would otherwise be in play if a customer or Systems Integrator had assembled such a complex system themselves from the constituent components.  For example, there's myriad network protocols which could be used with Infiniband.  Myriad ways the components could be interconnected, myriad tunable settings, etc. But what has really surprised me - and I've been working in this area for 15 years now - is just how much easier and faster Engineered Systems have made debugging and issue resolution. All those error opportunities for sub-optimal cabling, unusual network protocols, sub-optimal deployment of virtualization technologies, issues with 3rd party storage, issues with 3rd party multi-pathing products, etc., are simply taken out of the equation. All those error opportunities for making an issue unique to a particular set-up, the "why aren't we seeing this on any other system ?" type questions, the doubts, just go away when we or a customer discover an issue on an Engineered System. It enables a really honed response, getting to the root cause much, much faster than would otherwise be the case. Here's a couple of examples from the last month, one found in-house by my team, one found by a customer: Example 1: We found a node eviction issue running 11gR2 with Solaris 11 SRU 12 under extreme load on what we call our ExaLego test system (mimics an Exadata / SuperCluster 11gR2 Exadata Storage Cell set-up).  We quickly established that an enhancement in SRU12 enabled an 11gR2 process to query Infiniband's Subnet Manager, replacing a fallback mechanism it had used previously.  Under abnormally heavy load, the query could return results which were misinterpreted resulting in node eviction.  In several daily joint debugging sessions between the Solaris, Infiniband, and 11gR2 teams, the issue was fully root caused, evaluated, and a fix agreed upon.  That fix went back into all Solaris releases the following Monday.  From initial issue discovery to the fix being put back into all Solaris releases was just 10 days. Example 2: A customer reported sporadic performance degradation.  The reasons were unclear and the information sparse.  The SPARC SuperCluster Engineered Systems support teams which comprises both SPARC/Solaris and Database/Exadata experts worked to root cause the issue.  A number of contributing factors were discovered, including tunable parameters.  An intense collaborative investigation between the engineering teams identified the root cause to a CPU bound networking thread which was being starved of CPU cycles under extreme load.  Workarounds were identified.  Modifications have been put back into 11gR2 to alleviate the issue and a development project already underway within Solaris has been sped up to provide the final resolution on the Solaris side.  The fixed SPARC SuperCluster configuration greatly aided issue reproduction and dramatically sped up root cause analysis, allowing the correct workarounds and fixes to be identified, prioritized, and implemented.  The customer is now extremely happy with performance and robustness.  Since the configuration is common to other customers, the lessons learned are being proactively rolled out to other customers and incorporated into the installation procedures for future customers.  This effectively acts as a turbo-boost to performance and reliability for all SPARC SuperCluster customers.  If this had occurred in a "home grown" system of this complexity, I expect it would have taken at least 6 months to get to the bottom of the issue.  But because it was an Engineered System, known, understood, and qualified by both the Solaris and Database teams, we were able to collaborate closely to identify cause and effect and expedite a solution for the customer.  That is a key advantage of Engineered Systems which should not be underestimated.  Indeed, the initial issue mitigation on the Database side followed by final fix on the Solaris side, highlights the high degree of collaboration and excellent teamwork between the Oracle engineering teams.  It's a compelling advantage of the integrated Oracle Red Stack in general and Engineered Systems in particular.

  Read the article

• Silverlight Relay Commands

  - by George Evjen

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} I am fairly new at Silverlight development and I usually have an issue that needs research every day. Which I enjoy, since I like the idea of going into a day knowing that I am  going to learn something new. The issue that I am currently working on centers around relay commands. I have a pretty good handle on Relay Commands and how we use them within our applications. <Button Command="{Binding ButtonCommand}" CommandParameter="NewRecruit" Content="New Recruit" /> Here in our xaml we have a button. The button has a Command and a CommandParameter. The command binds to the ButtonCommand that we have in our ViewModel RelayCommand _buttonCommand;         /// <summary>         /// Gets the button command.         /// </summary>         /// <value>The button command.</value>         public RelayCommand ButtonCommand         {             get             {                 if (_buttonCommand == null)                 {                     _buttonCommand = new RelayCommand(                         x => x != null && x.ToString().Length > 0 && CheckCommandAvailable(x.ToString()),                         x => ExecuteCommand(x.ToString()));                 }                 return _buttonCommand;             }         }   In our relay command we then do some checks with a lambda expression. We check if the command  parameter is null, is the length greater than 0 and we have a CheckCommandAvailable method that will tell  us if the button is even enabled. After we check on these three items we then pass the command parameter to an action method. This is all pretty straight forward, the issue that we solved a few days ago centered around having a control that needed to use a Relay Command and this control was a nested control and was using a different DataContext. The example below illustrates how we handled this scenario. In our xaml usercontrol we had to set a name to this control. <Controls3:RadTileViewItem x:Class="RecruitStatusTileView"     xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"     xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"     xmlns:d="http://schemas.microsoft.com/expression/blend/2008"     xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006"      xmlns:Controls1="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls"      xmlns:Controls2="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Input"      xmlns:Controls3="clr-namespace:Telerik.Windows.Controls;assembly=Telerik.Windows.Controls.Navigation"      mc:Ignorable="d" d:DesignHeight="400" d:DesignWidth="800" Header="{Binding Title,Mode=TwoWay}" MinimizedHeight="100"                             x:Name="StatusView"> Here we are using a telerik RadTileViewItem. We set the name of this control to “StatusView”. In our button control we set our command parameters and commands different than the example above. <HyperlinkButton Content="{Binding BigBoardButtonText, Mode=TwoWay}" CommandParameter="{Binding 'Position.PositionName'}" Command="{Binding ElementName=StatusView, Path=DataContext.BigBoardCommand, Mode=TwoWay}" /> This hyperlink button lives in a ListBox control and this listbox has an ItemSource of PositionSelectors. The Command Parameter is binding to the Position.Position property of that PositionSelectors object. This again is pretty straight forward again. What gets a bit tricky is the Command property in the hyperlink. It is binding to the element name we created in the user control (StatusView) Because this hyperlink is in a listbox and is in the item template it doesn’t have a direct handle on the DataContext that the RadTileViewItem has so we have to make sure it does. We do that by binding to the element name of status view then set the path to DataContext.BigBoardCommand. BigBoardCommand is the name of the RelayCommand in the view model. private RelayCommand _bigBoardCommand = null;         /// <summary>         /// Gets the big board command.         /// </summary>         /// <value>The big board command.</value>         public RelayCommand BigBoardCommand         {             get             {                 if (_bigBoardCommand == null)                 {                     _bigBoardCommand = new RelayCommand(x => true, x => AddToBigBoard(x.ToString()));                 }                 return _bigBoardCommand;             }         } From there we check for true again and then call the action and pass in the parameter that we had as the command parameter. What we are working on now is a bit trickier than this second example. In the above example we are only creating this TileViewItem with this name “StatusView” once. In another part of our application we are generating multiple TileViewItems, so we cannot set the name in the control as we cant have multiple controls with the same name. When we run the application we get an error that reads that the value is out of expected range. My searching has led me to think we cannot have multiple controls with the same name. This is today’s problem and Ill post the solution to this once it is found.

  Read the article

• What Can We Learn About Software Security by Going to the Gym

  - by Nick Harrison

  There was a recent rash of car break-ins at the gym. Not an epidemic by any stretch, probably 4 or 5, but still... My gym used to allow you to hang your keys from a peg board at the front desk. This way you could come to the gym dressed to work out, lock your valuables in your car, and not have anything to worry about. Ignorance is bliss. The problem was that anyone who wanted to could go pick up your car keys, click the unlock button and find your car. Once there, they could rummage through your stuff and then walk back in and finish their workout as if nothing had happened. The people doing this were a little smatter then the average thief and would swipe some but not all of your cash leaving everything else in place. Most thieves would steal the whole car and be busted more quickly. The victims were unaware that anything had happened for several days. Fortunately, once the victims realized what had happened, the gym was still able to pull security tapes and find out who was misbehaving. All of the bad guys were busted, and everyone can now breathe a sigh of relieve. It is once again safe to go to the gym. Except there was still a fundamental problem. Putting your keys on a peg board by the front door is just asking for bad things to happen. One person got busted exploiting this security flaw. Others can still be exploiting it. In fact, others may well have been exploiting it and simply never got caught. How long would it take you to realize that $10 was missing from your wallet, if everything else was there? How would you even know when it went missing? Would you go to the front desk and even bother to ask them to review security tapes if you were only missing a small amount. Once highlighted, it is easy to see how commonly such vulnerability may have been exploited. So the gym did the very reasonable precaution of removing the peg board. To me the most shocking part of this story is the resulting uproar from gym members losing the convenient key peg. How dare they remove the trusted peg board? How can I work out now, I have to carry my keys from machine to machine? How can I enjoy my workout with this added inconvenience? This all happened a couple of weeks ago, and some people are still complaining. In light of the recent high profile hacking, there are a couple of parallels that can be drawn. Many web sites are riddled with vulnerabilities are crazy and easily exploitable as leaving your car keys by the front door while you work out. No one ever considered thanking the people who were swiping these keys for pointing out the vulnerability. Without a hesitation, they had their gym memberships revoked and are awaiting prosecution. The gym did recognize the vulnerability for what it is, and closed up that attack vector. What can we learn from this? Monitoring and logging will not prevent a crime but they will allow us to identify that a crime took place and may help track down who did it. Once we find a security weakness, we need to eliminate it. We may never identify and eliminate all security weaknesses, but we cannot allow well known vulnerabilities to persist in our system. In our case, we are not likely to meet resistance from end users. We are more likely to meet resistance from stake holders, product owners, keeper of schedules and budgets. We may meet resistance from integration partners, co workers, and third party vendors. Regardless of the source, we will see resistance, but the weakness needs to be dealt with. There is no need to glorify a cracker for bringing to light a security weakness. Regardless of their claimed motives, they are not heroes. There is also no point in wasting time defending weaknesses once they are identified. Deal with the weakness and move on. In may be embarrassing to find security weaknesses in our systems, but it is even more embarrassing to continue ignoring them. Even if it is unpopular, we need to seek out security weaknesses and eliminate them when we find them. http://www.sans.org has put together the Common Weakness Enumeration http://cwe.mitre.org/ which lists out common weaknesses. The site navigation takes a little getting used to, but there is a treasure trove here. Here is the detail page for SQL Injection. It clearly states how this can be exploited, in case anyone doubts that the weakness should be taken seriously, and more importantly how to mitigate the risk.

  Read the article

• How many developers before continuous integration becomes effective for us?

  - by Carnotaurus

  There is an overhead associated with continuous integration, e.g., set up, re-training, awareness activities, stoppage to fix "bugs" that turn out to be data issues, enforced separation of concerns programming styles, etc. At what point does continuous integration pay for itself? EDIT: These were my findings The set-up was CruiseControl.Net with Nant, reading from VSS or TFS. Here are a few reasons for failure, which have nothing to do with the setup: Cost of investigation: The time spent investigating whether a red light is due a genuine logical inconsistency in the code, data quality, or another source such as an infrastructure problem (e.g., a network issue, a timeout reading from source control, third party server is down, etc., etc.) Political costs over infrastructure: I considered performing an "infrastructure" check for each method in the test run. I had no solution to the timeout except to replace the build server. Red tape got in the way and there was no server replacement. Cost of fixing unit tests: A red light due to a data quality issue could be an indicator of a badly written unit test. So, data dependent unit tests were re-written to reduce the likelihood of a red light due to bad data. In many cases, necessary data was inserted into the test environment to be able to accurately run its unit tests. It makes sense to say that by making the data more robust then the test becomes more robust if it is dependent on this data. Of course, this worked well! Cost of coverage, i.e., writing unit tests for already existing code: There was the problem of unit test coverage. There were thousands of methods that had no unit tests. So, a sizeable amount of man days would be needed to create those. As this would be too difficult to provide a business case, it was decided that unit tests would be used for any new public method going forward. Those that did not have a unit test were termed 'potentially infra red'. An intestesting point here is that static methods were a moot point in how it would be possible to uniquely determine how a specific static method had failed. Cost of bespoke releases: Nant scripts only go so far. They are not that useful for, say, CMS dependent builds for EPiServer, CMS, or any UI oriented database deployment. These are the types of issues that occured on the build server for hourly test runs and overnight QA builds. I entertain that these to be unnecessary as a build master can perform these tasks manually at the time of release, esp., with a one man band and a small build. So, single step builds have not justified use of CI in my experience. What about the more complex, multistep builds? These can be a pain to build, especially without a Nant script. So, even having created one, these were no more successful. The costs of fixing the red light issues outweighed the benefits. Eventually, developers lost interest and questioned the validity of the red light. Having given it a fair try, I believe that CI is expensive and there is a lot of working around the edges instead of just getting the job done. It's more cost effective to employ experienced developers who do not make a mess of large projects than introduce and maintain an alarm system. This is the case even if those developers leave. It doesn't matter if a good developer leaves because processes that he follows would ensure that he writes requirement specs, design specs, sticks to the coding guidelines, and comments his code so that it is readable. All this is reviewed. If this is not happening then his team leader is not doing his job, which should be picked up by his manager and so on. For CI to work, it is not enough to just write unit tests, attempt to maintain full coverage, and ensure a working infrastructure for sizable systems. The bottom line: One might question whether fixing as many bugs before release is even desirable from a business prespective. CI involves a lot of work to capture a handful of bugs that the customer could identify in UAT or the company could get paid for fixing as part of a client service agreement when the warranty period expires anyway.

  Read the article

• Stumbling Through: Visual Studio 2010 (Part II)

  I would now like to expand a little on what I stumbled through in part I of my Visual Studio 2010 post and touch on a few other features of VS 2010.  Specifically, I want to generate some code based off of an Entity Framework model and tie it up to an actual data source.  Im not going to take the easy way and tie to a SQL Server data source, though, I will tie it to an XML data file instead.  Why?  Well, why not?  This is purely for learning, there are probably much better ways to get strongly-typed classes around XML but it will force us to go down a path less travelled and maybe learn a few things along the way.  Once we get this XML data and the means to interact with it, I will revisit data binding to this data in a WPF form and see if I cant get reading, adding, deleting, and updating working smoothly with minimal code.  To begin, I will use what was learned in the first part of this blog topic and draw out a data model for the MFL (My Football League) - I dont want the NFL to come down and sue me for using their name in this totally football-related article.  The data model looks as follows, with Teams having Players, and Players having a position and statistics for each season they played: Note that when making the associations between these entities, I was given the option to create the foreign key but I only chose to select this option for the association between Player and Position.  The reason for this is that I am picturing the XML that will contain this data to look somewhat like this: <MFL> <Position/> <Position/> <Position/> <Team>     <Player>         <Statistic/>     </Player> </Team> </MFL> Statistic will be under its associated Player node, and Player will be under its associated Team node no need to have an Id to reference it if we know it will always fall under its parent.  Position, however, is more of a lookup value that will not have any hierarchical relationship to the player.  In fact, the Position data itself may be in a completely different xml file (something Id like to play around with), so in any case, a player will need to reference the position by its Id. So now that we have a simple data model laid out, I would like to generate two things based on it:  A class for each entity with properties corresponding to each entity property An IO class with methods to get data for each entity, either all instances, by Id or by parent. Now my experience with code generation in the past has consisted of writing up little apps that use the code dom directly to regenerate code on demand (or using tools like CodeSmith).  Surely, there has got to be a more fun way to do this given that we are using the Entity Framework which already has built-in code generation for SQL Server support.  Lets start with that built-in stuff to give us a base to work off of.  Right click anywhere in the canvas of our model and select Add Code Generation Item: So just adding that code item seemed to do quite a bit towards what I was intending: It apparently generated a class for each entity, but also a whole ton more.  I mean a TON more.  Way too much complicated code was generated now that code is likely to be a black box anyway so it shouldnt matter, but we need to understand how to make this work the way we want it to work, so lets get ready to do some stumbling through that text template (tt) file. When I open the .tt file that was generated, right off the bat I realize there is going to be trouble there is no color coding, no intellisense no nothing!  That is going to make stumbling through more like groping blindly in the dark while handcuffed and hopping on one foot, which was one of the alternate titles I was considering for this blog.  Thankfully, the community comes to my rescue and I wont have to cast my mind back to the glory days of coding in VI (look it up, kids).  Using the Extension Manager (Available under the Tools menu), I did a quick search for tt editor in the Online Gallery and quickly found the Tangible T4 Editor: Downloading and installing this was a breeze, and after doing so I got some color coding and intellisense while editing the tt files.  If you will be doing any customizing of tt files, I highly recommend installing this extension.  Next, well see if that is enough help for us to tweak that tt file to do the kind of code generation that we wantDid you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Use your own domain email and tired of SPAM? SPAMfighter FTW

  - by Dave Campbell

  I wouldn't post this if I hadn't tried it... and I paid for it myself, so don't anybody be thinking I'm reviewing something someone sent me! Long ago and far away I got very tired of local ISPs and 2nd phone lines and took the plunge and got hooked up to cable... yeah I know the 2nd phone line concept may be hard for everyone to understand, but that's how it was in 'the old days'. To avoid having to change email addresses all the time, I decided to buy a domain name, get minimal hosting, and use that for all email into the house. That way if I changed providers, all the email addresses wouldn't have to change. Of course, about a dozen domains later, I have LOTS of pop email addresses and even an exchange address to my client's server... times have changed. What also has changed is the fact that we get SPAM... 'back in the day' when I was a beta tester for the first ISP in Phoenix, someone tried sending an ad to all of us, and what he got in return for his trouble was a bunch of core dumps that locked up his email... if you don't know what a core dump is, ask your grandfather. But in today's world, we're all much more civilized than that, and as with many things, the criminals seem to have much more rights than we do, so we get inundated with email offering all sorts of wild schemes that you'd have to be brain-dead to accept, but yet... if people weren't accepting them, they'd stop sending them. I keep hoping that survival of the smartest would weed out the mental midgets that respond and then the jumk email stop, but that hasn't happened yet anymore than finding high-quality hearing aids at the checkout line of Safeway because of all the dimwits playing music too loud inside their car... but that's another whole topic and I digress. So what's the solution for all the spam? And I mean *all*... on that old personal email address, I am now getting over 150 spam messages a day! Yes I know that's why God invented the delete key, but I took it on as a challenge, and it's a matter of principle... why should I switch email addresses, or convert from [email protected] to something else, or have all my email filtered through some service just because some A-Hole somewhere has a site up trying to phish Ma & Pa Kettle (ask your grandfather about that too) out of their retirement money? Well... I got an email from my cousin the other day while I was writing yet another email rule, and there was a banner on the bottom of his email that said he was protected by SPAMfighter. SPAMfighter huh.... so I took a look at their site, and found yet one more of the supposed tools to help us. But... I read that they're a Microsoft Gold Partner... and that doesn't come lightly... so I took a gamble and here's what I found: I installed it, and had to do a couple things: 1) SPAMfighter stuffed the SPAMfighter folder into my client's exchange address... I deleted it, made a new SPAMfighter folder where I wanted it to go, then in the SPAMfighter Clients settings for Outlook, I told it to put all spam there. 2) It didn't seem to be doing anything. There's a ribbon button that you can select "Block", and I did that, wondering if I was 'training' it, but it wasn't picking up duplicates 3) I sent email to support, and wrote a post on the forum (not to self: reply to that post). By the time the folks from the home office responded, it was the next day, and first up, SPAMfighter knocked down everything that came through when Outlook opend... two thumbs up! I disabled my 'garbage collection' rule from Outlook, and told Outlook not to use the junk folder thinking it was interfering. 4) Day 2 seemed to go about like Day 1... but I hung in there. 5) Day 3 is now a whole new day... I had left Outlook open and hadn't looked at the PC since sometime late yesterday afternoon, and when I looked this morning, *every bit* of spam was in the SPAMfighter folder!! I'm a new paying customer After watching SPAMfighter work this morning, I've purchased a 1-year license, and I now can sit and watch as emails come in and disappear from my inbox into the SPAMfighter folder. No more continual tweaking of the rules. I've got SPAMfighter set to 'Very Hard' filtering... personally I'd rather pull the few real emails out of the SPAMfighter folder than pull spam out of the real folders. Yes this is simply another way of using the delete key, but you know what? ... it feels good :) Here's a screenshot of the stats after just about 48 hours of being onboard: Note that all the ones blocked by me were during Day 1 and 2... I've blocked none today, and everything is blocked. Stay in the 'Light!

  Read the article

• 24 Hours of PASS – first reflections

  - by Rob Farley

  A few days after the end of 24HOP, I find myself reflecting on it. I’m still waiting on most of the information. I want to be able to discover things like where the countries represented on each of the sessions, and things like that. So far, I have the feedback scores and the numbers of attendees. The data was provided in a PDF, so while I wait for it to appear in a more flexible format, I’ve pushed the 24 attendee numbers into Excel. This chart shows the numbers by time. Remember that we started at midnight GMT, which was 10:30am in my part of the world and 8pm in New York. It’s probably no surprise that numbers drooped a bit at the start, stayed comparatively low, and then grew as the larger populations of the English-speaking world woke up. I remember last time 24HOP ran for 24 hours straight, there were quite a few sessions with less than 100 attendees. None this time though. We got close, but even when it was 4am in New York, 8am in London and 7pm in Sydney (which would have to be the worst slot for attracting people), we still had over 100 people tuning in. As expected numbers grew as the UK woke up, and even more so as the US did, with numbers peaking at 755 for the “3pm in New York” session on SQL Server Data Tools. Kendra Little almost reached those numbers too, and certainly contributed the biggest ‘spike’ on the chart with her session five hours earlier. Of all the sessions, Kendra had the highest proportion of ‘Excellent’s for the “Overall Evaluation of the session” question, and those of you who saw her probably won’t be surprised by that. Kendra had one of the best ranked sessions from the 24HOP event this time last year (narrowly missing out on being top 3), and she has produced a lot of good video content since then. The reports indicate that there were nearly 8.5 thousand attendees across the 24 sessions, averaging over 350 at each one. I’m looking forward to seeing how many different people that was, although I do know that Wil Sisney managed to attend every single one (if you did too, please let me know). Wil even moderated one of the sessions, which made his feat even greater. Thanks Wil. I also want to send massive thanks to Dave Dustin. Dave probably would have attended all of the sessions, if it weren’t for a power outage that forced him to take a break. He was also a moderator, and it was during this session that he earned special praise. Part way into the session he was moderating, the speaker lost connectivity and couldn’t get back for about fifteen minutes. That’s an incredibly long time when you’re in a live presentation. There were over 200 people tuned in at the time, and I’m sure Dave was as stressed as I was to have a speaker disappear. I started chasing down a phone number for the speaker, while Dave spoke to the audience. And he did brilliantly. He started answering questions, and kept doing that until the speaker came back. Bear in mind that Dave hadn’t expected to give a presentation on that topic (or any other), and was simply drawing on his SQL expertise to get him through. Also consider that this was between midnight at 1am in Dave’s part of the world (Auckland, NZ). I would’ve been expecting just to welcome people, monitor questions, probably read some out, and in general, help make things run smoothly. He went far beyond the call of duty, and if I had a medal to give him, he’d definitely be getting one. On the whole, I think this 24HOP was a success. We tried a different platform, and I think for the most part it was a popular move. We didn’t ask the question “Was this better than LiveMeeting?”, but we did get a number of people telling us that they thought the platform was very good. Some people have told me I get a chance to put my feet up now that this is over. As I’m also co-ordinating a tour of SQLSaturday events across the Australia/New Zealand region, I don’t quite get to take that much of a break (plus, there’s the little thing of squeezing in seven SQL 2012 exams over the next 2.5 weeks). But I am pleased to be reflecting on this event rather than anticipating it. There were a number of factors that could have gone badly, but on the whole I’m pleased about how it went. A massive thanks to everyone involved. If you’re reading this and thinking you wish you could’ve tuned in more, don’t worry – they were all recorded and you’ll be able to watch them on demand very soon. But as well as that, PASS has a stream of content produced by the Virtual Chapters, so you can keep learning from the comfort of your desk all year round. More info on them at sqlpass.org, of course.

  Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >