Search Results

Search found 59272 results on 2371 pages for 'time stamp'.

Page 287/2371 | < Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >

  • Can't reliably ping 6224 router from directly-attached system

    - by David Mackintosh
    OK, here's my situation. This is on the internet. The 6224 is the router in this picture and physically resides in Kanata. Both VLAN 1697 and 3994 are provided by an internet service provider. These VLANs are provided through a single 1Gb ethernet wire. The Kanata hosts are directly attached to the 6224; the other two sites are remote. VLAN 3994 is a single IP address space, so theoretically it shouldn't matter physically where the hosts on that subnet are. Here's the problem. I have a monitoring system which is connected further into the internet, so probes from the monitor would come in to this diagram on the 1697 VLAN. When I ping hosts at Albert or Bells Corners from the internet, there is 0 loss. The connection looks perfect. When I ping hosts at Kanata, I lose anywhere from 10 to 40% of the pings. The loss is not predictable, but: when I do lose them, I always lose at least 3, usually 4, rarely more, pings in a bunch. I have attached a monitor directly to the 6224 in Kanata on 3994.. When the monitor pings the 6224 routing interface, I see exactly the same loss pattern -- but NOT at the same time as the loss from the remote system. Ping time is around 1ms. When the monitor pings another system directly attached to the 6224, there is 0 loss. Ping time is about 0.1ms, one-tenth of the time to ping the router. Anyone know what is going on here?

    Read the article

  • Does using a hexacore CPU make sense?

    - by Exa
    I'm currently planning to upgrade my computer system and I want to exchange CPU, board and RAM. I already had a look at some hexacore-CPUs from AMD and would like to know if it makes any sense to use such a CPU with six cores. Is there any software which really uses six cores? Especially in gaming? I'm using this PC mostly for gaming and from time to time for developing. I know that on the dual-core system (2 x 3GHz) I currently use, Visual Studio creates two instances of the compiler, one for each core. Would there be six instances of the compiler on a hexacore system for super fast compiling? Is there any software that uses six cores? Would running two applications cause the usage of more CPUs? (For example two CPUs for a game you're playing while two other CPUs are used for compiling at the same time) I hope someone can point out the benefits of a hexacore system. The OS would be Windows 7 64 Bit and I use the PC for gaming most of the time. (Crysis 2, CoD, stuff like that)

    Read the article

  • How to set static ip address on vmware for NAT guest vms from an ubuntu Host dhcp server?

    - by javadba
    I need to configure various linux flavor NAT'ed guest vm's to have static ip addresses provided by the Ubuntu host. The vmware documentation punts on this topic, deferring to "see the man pages for your linux distribution". But the generic pages for "my linux distro" do not know about the special stuff for vmware e.g. vmnet8. Pointers from someone who just knows how to do this would be much appreciated. Here is the /etc/vmware/vmnet8/dhcpd/dhcpd.conf: allow unknown-clients; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours subnet 192.168.238.0 netmask 255.255.255.0 { range 192.168.238.128 192.168.238.254; option broadcast-address 192.168.238.255; option domain-name-servers 192.168.238.2; option domain-name localdomain; default-lease-time 1800; # default is 30 minutes max-lease-time 7200; # default is 2 hours option netbios-name-servers 192.168.238.2; option routers 192.168.238.2; } host vmnet8 { hardware ethernet 00:50:56:C0:00:08; fixed-address 192.168.238.1; option domain-name-servers 0.0.0.0; option domain-name ""; option routers 0.0.0.0; } Fromt the dhcpd.conf documentation, we are supposed to add an entry for static hosts similar to the following: host mystatichostonee { hardware ethernet 00:20:6B:C7:9B:E4; fixed-address 192.168.238.101; } host mystatichosttwo { hardware ethernet 00:23:7a:C7:9c:F2; fixed-address 192.168.238.102; } But notice that the vmnet8 entry in the vmware-generated dhcpd.conf already is set to fixed-address. I don't know how to add the specifics for my hosts to that vmnet8 entry: do they become nested?

    Read the article

  • Microsoft Excel not graphing

    - by SmartLemon
    Im not sure if this is a math question or a su question. The experiment was relating the period of one "bounce" when you hang a weight on a spring and let it bounce. I have this data here, one being mass and one being time. The time is an average of 5 trials, each one being and average of 20 bounces, to minimize human error. t 0.3049s 0.3982s 0.4838s 0.5572s 0.6219s 0.6804s 0.7362s 0.7811s 0.8328s 0.869s The mass is the mass that was used in each trial (they aren't going up in exact differences because each weight has a slight difference, nothing is perfect in the real world) m 50.59g 100.43g 150.25g 200.19g 250.89g 301.16g 351.28g 400.79g 450.43g 499.71g My problem is that I need to find the relationship between them, I know m = (k/4PI^2)*T^2 so I can work out k like that but we need to graph it. I can assume that the relationship is a sqrt relation, not sure on that one. But it appears to be the reverse of a square. Should it be 1/x^2 then? Either way my problem is still present, I have tried 1/x, 1/x^2, sqrt, x^2, none of them produce a straight line. The problem for SU is that when I go to graph the data on Excel I set the y axis data (which is the weights) and then when I go to set the x axis (which is the time) it just replaces the y axis with what I want to be the x axis, this is only happening when I have the sqrt of "m" as the y axis and I try to set the x axis as the time. The problem of math is that, am I even using the right thing? To get a straight line it would need to be x = y^1/2 right? I thought I was doing the right thing, it is what we were told to do. I'm just not getting anything that looks right.

    Read the article

  • Exchange 2010 update timezone of all calendar items

    - by Andrew
    We are currently operating Exchange 2010 server with Outlook 2010 clients on a ship. We have just changed timezones for the first time in quite a while today. Is there any way to rebase all the calendars and/or update all the calendar items to the new timezone at the same time? I have looked at the following tools already. Microsoft Exchange Calendar Update Configuration Tool - http://www.microsoft.com/en-us/download/details.aspx?id=6266 (Doesn't support exchange 2010) Time Zone Data Update Tool for Microsoft Office Outlook - http://www.microsoft.com/en-us/download/details.aspx?id=17291 The Time Zone Data Update Tool for Microsoft Office Outlook does work for individual users, but has some serious downsides. Including each user needs to run it (approx 400 users), and also it only seems to work on the default account in Outlook 2010, a lot of our users have role accounts as well that we would need to run the tool on. The only way I can find to get this tool to run on the role accounts is to make the role account the default account in outlook, and that in itself is quiet an involved process especially if you have 2 or 3 role accounts. So is there a way to just change all calendar items on our Exchange server to a different timezone in one go? We are a little unique in terms of the whole organisation can change timezones over night, meeting rooms and all, but surely a product as advanced as Exchange 2010 allows us to do what we need.

    Read the article

  • Measuring performance indicators on a cluster

    - by Aditya Singh
    My architecture is based on Amazon. A ELB load balancer balances POST requests among m1.large instances. Every instance has a nginx server on port 80 which distributes the requests to 4 python-tornado servers on backend which handle the request. These tornado servers are taking about 5 - 10ms to respond to one request but this is the internal compute time of every request. I want to put this thing on test and i want to measure the response time from ELB to upstream and back and how does it vary when the QPS throughput is increased and plot a graph of Time vs. QPS vs. Latency and other factors like CPU and Memory. Is there a software to do that or should i log everything somewhere with latency checks and then analyze the whole log to get the stuff out. I would also need to write a self-monitor which keeps checking the whole response time. Is it possible to do it with a script from within the server. If so, will it be accurate ?

    Read the article

  • Securing NTP: which method to use?

    - by Harry
    Can someone good at NTP configuration please share which method is the best/easiest to implement a secure, tamper-proof version of NTP? Here are some difficulties... I don't have the luxury of having my own stratum 0 time source, so must rely on external time servers. Should I read up on the AutoKey method or should I try to go the MD5 route? Based on what I know about symmetric cryptography, it seems that the MD5 method relies on a pre-agreed set of keys (symmetric cryptography) between the client and the server, and, so, is prone to man-in-the-middle attack. AutoKey, on the other hand, does not appear to work behind a NAT or a masquerading host. Is this still true, by the way? (This reference link is dated 2004, so I'm not sure what is the state of art today.) 4.1 Are public AutoKey-talking time servers available? I browsed through the NTP book by David Mills. The book looks excellent in a way (coming from the NTP creator after all), but the information therein is also overwhelming. I just need to first configure a secure version of NTP and then may be later worry about its architectural and engineering underpinnings. Can someone please wade me through these drowning NTP waters? Don't necessarily need a working config from you, just info on which NTP mode/config to try and may be also a public time server that supports that mode/config. Many thanks, /HS

    Read the article

  • Simple Distributed Disconnected way to sync a directory

    - by Rory
    I want to start regularly backup my home directory on my ubuntu laptop, machine X. Suppose I have access to 2 different remote (linux) servers that I can backup to, machines A & B. Machine X will be the master, and should be synced to A and B. I could just regularly run rsync from X to A and then from X to B. That's all I need. However I'm curious if there's a more bandwidth effecient, and hence faster way to do it. Assuming X is going to be on residential style broadband lines, and since I don't want to soak up the bandwidth, I would limit the transfer from X. A and B will be on all the time, however X, will not be, so I'd also like to reduce the amount of time that X is transfering, potentially allowing A and B to spend more time transfering. Also, X won't be connected all the time. What's the best way to do this? rsync from X to A, then from A to B? Timing that right could be troublesome. I don't want to keep old files around, so if I was to rsync, then the --del option would be used. Could that mean something might get tranfered from A to B, then deleted from B, then transfered from A to B again? That's suboptimal. I know there are fancy distributed filesystems like gluster, but I think that's overkill in this case, and might not fit with the disconnected nature.

    Read the article

  • Apache https is slow

    - by raucous12
    Hey, I've set apache up to use SSL with a self signed certificate. With https (KeepAlive on), I can get over 3000 requests per second. However, with https (KeepAlive off), I can only get 13 requests per second. I know there is supposed to be a bit of an overhead, but this seems abnormal. Can anyone suggest how I might go about debugging this. Here is the ab log for https: Server Software: Apache/2.2.3 Server Hostname: 127.0.0.1 Server Port: 443 SSL/TLS Protocol: TLSv1/SSLv3,DHE-RSA-AES256-SHA,4096,256 Document Path: /hello.html Document Length: 29 bytes Concurrency Level: 5 Time taken for tests: 30.49425 seconds Complete requests: 411 Failed requests: 0 Write errors: 0 Total transferred: 119601 bytes HTML transferred: 11919 bytes Requests per second: 13.68 [#/sec] (mean) Time per request: 365.565 [ms] (mean) Time per request: 73.113 [ms] (mean, across all concurrent requests) Transfer rate: 3.86 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 190 347 74.3 333 716 Processing: 0 14 24.0 1 166 Waiting: 0 11 21.6 0 165 Total: 191 361 80.8 345 716 Percentage of the requests served within a certain time (ms) 50% 345 66% 377 75% 408 80% 421 90% 468 95% 521 98% 578 99% 596 100% 716 (longest request)

    Read the article

  • JBoss database connection pool configuration

    - by Qben
    I am facing an connection pool issue in my clustered JBoss installation. From time to time one of my connection pools will hit the roof and I get a lot of these in my logfile. java.sql.SQLException: No ManagedConnections available within configured blocking timeout ( 30000 [ms] ); The odd thing is that I can see in the JMX console that the ConnectionCount hit the roof, but at the same time InUseConnectionCount is often quite small. The problem will resolve itself after a couple of minutes but during recovery phase my application will not work (for obvious reasons). The question is if this indicate an error in the configured timeouts of the connections (I pretty much use defaults), or if my pool is simply too small to handle the peaks. Under normal operation I would say I use ~40% of the configured max number of connections. The reason I just don't increase the max number of connection is that if I actually used up all connections I suspect that InUseConnectionCount would hit the roof. Hence I suspect I might have more issues than just a too small pool size. Maybe InUseConnectionCount has decreased at the time I check jmx-console and it actually do hit the roof? I tend to collect data every second minute. Any hints are more than welcome.

    Read the article

  • apache/httpd responds slower under EL6.1 than EL5.6 (centos)

    - by daniel
    I've read through other threads on performance differences between RHEL6 and RHEL5, but none seem a tight match to mine. My issue manifests itself in slightly slower average response time (20ms) per request. I have about 10/10 servers of the same hardware spec with Cent6.1 and Cent5.6. The issue is consistent across the group. I am running Ruby on Rails with Passenger. Apache config is identical (checked out from the same SVN repo) Ruby and Passenger are identical builds. Application is identical and being served traffic round robin. mod_worker An interesting clue from server-status: The Cent6.1 servers have a steady 20-40 threads in the "Reading Request" state while the Cent5.6 servers have around 1. I'm graphing this so I can see it trend over time. I also have a bunch of much newer machines that are significantly faster and are running Cent6.1. They dust all the older machines in response time, but I can see they also have a steady 20-40 threads in the "Reading Request" state. This makes me believe I can get their response time down, if I can figure out what is holding up these requests. My gut is telling me that I need to tune some network setting in sysctl, but I haven't figured it out yet. Help is appreciated.

    Read the article

  • Timestamp Updating Constantly on /dev/null

    - by motorleague
    I've been working on a problem with a /dev/null file on an AIX system (just for background it looks as though it was inadvertently deleted and recreated as a normal file by somebody), but in trying to determine what caused the problem, I noticed that the timestamp on it seems to update every minute. I've observed this on several AIX servers at my workplace. At present I can't entirely rule out this be something specific to the Application being used at my workplace, so I compared with CentOS and Debian based computers at home last night. The CentOS box, which runs 24 hours, had a mod time on /dev/null of around 4 days ago (during which time it was essentially just being used as a web browser and multimedia player, although it would have had active but essentially unused Apache, MySQL and VMM processes running in the background). The timestamp on /dev/null on the Debian machine, which was a just booted laptop, pretty much reflected the boot time, but I tested redirecting STDIN from, and STDOUT to it, and the modification time was unchanged (I'm not sure 100% sure if directing data to /dev/null constitutes "writing to it" in the way it would a normal file). So my question is essentially, could anybody please offer any advice with regards to what circumstances (permissions changes etc.. aside) might cause the timestamp on /dev/null to update? Thanks very much for any suggestions. Alex.

    Read the article

  • MicroSD card getting corrupted for no good reason

    - by ChaosR
    I recently bought an MicroSD card online. It's a Sandisk 16GB class 2. However, it has a nasty problem. Every time I fill it with my data, the fat tables get corrupted. I've tried reformatting it, blanking it, doesn't seem to solve the problem. I have tried windows and linux (ubuntu), both have the problem. I've used my usb microsd readers, and even tried putting it in my phone and putting data on it from there. All have this problem. Now the really odd thing is, besides the corrupted file tables, no programs can find anything wrong with the hardware. I've tried both chkdisk and "badblocks -w", neither give any type of error. Now I don't know if the actual data gets corrupted, or if its just filesystem tables. What happens is that one or more folders start showing a load of chinese-charred (random UTF8 symbols I suppose) folders and files, and it is impossible to do anything with those. All the other data (outside of the corrupted folders) seems fine. I've tried to test it, and the problem doesn't seem to show up until I fill the disk upto about 3~4GB. After that I can still access the data. But as soon as I eject/safely remove/unmount it, the bad things happen somehow. Next time I plug it in, the folders I most recently wrote to (but sometimes also the folders I wrote the time before last time to) are all gibberish. Does anybody have any clue what might be going on here?

    Read the article

  • Failed Software RAID0 on Linux - Attempting to recover data

    - by Gizmo_the_Great
    I have a two disk RAID0 software raid (not hardware raid) that is reported to have failed during boot and my OS won't start. Using a Live CD, I get the following output : sudo mdadm -E /dev/sdc1 /dev/sdd1 /dev/sdc1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 1465145328 (698.64 GiB 750.15 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : ad427cd2:9f885f57:7f41015f:90f8f6af Update Time : Sun Jun 8 12:35:11 2014 Checksum : a37407ff - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) /dev/sdd1: Magic : a92b4efc Version : 1.2 Feature Map : 0x0 Array UUID : 3710713d:fb301031:84b61247:d1d53e0f Name : HP-xw9300:0 Creation Time : Sun Sep 1 15:22:26 2013 Raid Level : -unknown- Raid Devices : 0 Avail Dev Size : 976771056 (465.76 GiB 500.11 GB) Data Offset : 16 sectors Super Offset : 8 sectors State : active Device UUID : 2ea0199d:cb08d9e7:0830448a:a1e1e348 Update Time : Sun Jun 8 13:06:19 2014 Checksum : 8883c492 - correct Events : 1 Device Role : spare Array State : ('A' == active, '.' == missing) GParted lists both disks, detects the flags as 'Raid' and lists the data usage. Can anyone please help me re-assemble just so that I can copy some of the data off that I have not backed up recently? Thanks

    Read the article

  • Multiple Screen - Keyboard Sharing

    - by nhbdesign
    I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

    Read the article

  • amazon ec2-medium apache requests per second terrible

    - by TheDayIsDone
    EDITED -- test running from localhost now to rule out network... i have a c1.medium using EBS. when i do an apache benchmark and i'm just printing a "hello" for the test from localhost - no database hits, it's very slow. i can repeat this test many times with the same results. any thoughts? thanks in advance. ab -n 1000 -c 100 http://localhost/home/test/ Benchmarking localhost (be patient) Completed 100 requests Completed 200 requests Completed 300 requests Completed 400 requests Completed 500 requests Completed 600 requests Completed 700 requests Completed 800 requests Completed 900 requests Completed 1000 requests Finished 1000 requests Server Software: Apache/2.2.23 Server Hostname: localhost Server Port: 80 Document Path: /home/test/ Document Length: 5 bytes Concurrency Level: 100 Time taken for tests: 25.300 seconds Complete requests: 1000 Failed requests: 0 Write errors: 0 Total transferred: 816000 bytes HTML transferred: 5000 bytes Requests per second: 39.53 [#/sec] (mean) Time per request: 2530.037 [ms] (mean) Time per request: 25.300 [ms] (mean, across all concurrent requests) Transfer rate: 31.50 [Kbytes/sec] received Connection Times (ms) min mean[+/-sd] median max Connect: 0 7 21.0 0 73 Processing: 81 2489 665.7 2500 4057 Waiting: 80 2443 654.0 2445 4057 Total: 85 2496 653.5 2500 4057 Percentage of the requests served within a certain time (ms) 50% 2500 66% 2651 75% 2842 80% 2932 90% 3301 95% 3506 98% 3762 99% 3838 100% 4057 (longest request)

    Read the article

  • Troubleshooting DTCPing Errors

    - by JimmyP
    So I am running DTC ping between 2 machines on our network and am getting the following error ++++++++++++++++++++++++++++++++++++++++++++++ DTCping 1.9 Report for WEB2 ++++++++++++++++++++++++++++++++++++++++++++++ RPC server is ready ++++++++++++Validating Remote Computer Name++++++++++++ 03-03, 13:39:45.099-->Start DTC connection test Name Resolution: internal-->10.20.3.236-->internal.something 03-03, 13:39:45.114-->Start RPC test (WEB2-->internal) Problem:fail to invoke remote RPC method Error(0x6BA) at dtcping.cpp @303 -->RPC pinging exception -->1722(The RPC server is unavailable.) RPC test failed I have also run RPC ping where I get what I beleive is the same error: C:\Program Files\Windows Resource Kits\Tools>rpcping -s internal Exception 1722 (0x000006BA) Number of records is: 4 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1722 Detection location is 323 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 1237 Detection location is 313 Flags is 0 NumberOfParameters is 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 311 Flags is 0 NumberOfParameters is 3 Long val: 135 Pointer val: 0 Pointer val: 0 ProcessID is 5876 System Time is: 3/3/2011 2:44:12:822 Generating component is 8 Status is 10060 Detection location is 318 Flags is 0 NumberOfParameters is 0 I'm pretty sure that the exception number 1722 is the key but I can't find any info about it. There may be a firewall with ports that need opening between the machines which I am checking with our sys admins now. But I can do a regular ping between the machines. Other than that I am reading a lot of articles talking about OS services and components I know nothing about and am having trouble finding any info on. Can anyone shed any light on this? FYI the machine is running Windows Server 2003 RS SP2.

    Read the article

  • Server down at 23:26 every night

    - by miccet
    We are having a big problem with our sites stability the last couple of weeks and after endless hours of troubleshooting I don't get anywhere. So I turn to you dear community. Setup: 2 x VPS servers - Front end, 8 core, 8G RAM. - Database, 5 core, 3G RAM. Both running Ubuntu. Ruby on Rails EE with Passenger 3 and Rails 2.3.11. MySQL 5.1.67. The problem is that each night, at the exact same time (23:26) the SQL server suddenly shows a processlist full of COMMIT with an increasing Time. After 30-40 seconds (can go longer) a wave seems processed and the site responds for a few seconds before it repeats. During this hick up the database server load spikes while the front end is relaxing. I have looked at slow queries, but is not finding any locks or other unusual queries ran at this time. I have looked at iotop at the time of the halt and there is no activity from mysql. I also tried turning off query_cache and messed around with the mysql configuration file without much change. Any ideas?

    Read the article

  • What could possibly cause my computer to power down at random times?

    - by geoffreydv
    I have recently bought a new Power Supply and a new graphics card. My PC ran smoothly for a few months now but since a couple of days I'm having a strange problem. I am trying to isolate the problem to a specific piece of hardware (because if it's either the Power Supply or the Graphics card they are still under warranty). The problem started when I was playing a game (diablo 3). My PC suddenly powered down. I was unable to turn it on again by pressing the power button. I unplugged the power cable for a few seconds and plugged it back in. This time the pc powered on but the indication light turned orange instead of white as it normally does. The fans were not spinning and I did not see anything on my screen. After trying a couple of times I gave up. Two days later I tried again and this time the PC did boot up as usual. Everything looked okay until I tested if the problem was resolved by starting Diablo again. After about two minutes it powered down again as it did the first time. If I don't run any games my PC does power down after about 3-5 hours. Another fact that might be relevant: One time the PC did not shut down immediatly, instead first my graphics "powered down" but the music I was playing kept on playing. After about 20 seconds the pc powered down completely as usual. What I also noticed is that when I boot instantly after a power down, the chance of another power down occuring is much higher. Does anyone have an idea what could be causing this kind of behaviour or has a certain tool to diagnose the specific hardware parts? Thanks Specs: Memory: 6GB Processor: Intel i5 OS: Windows 7 64 bit The PC is a Dell Studio XPS 8100 with a replaced PSU and Graphics card: PSU: Corsair CX500 (500 watt) Graphics card: AMD Radeon 6850

    Read the article

  • pyqt QObject: Cannot create children for a parent that is in a different thread

    - by memomk
    QObject: Cannot create children for a parent that is in a different thread. (Parent is QTextDocument(0x9919018), parent's thread is QThread(0x97331e0), current thread is flooderthread(0x97b4c10) error means ? am sorry because am new to pyqt here is the code : i know the code is finished yet but it should work i guess the problem is with myfun.log function... #! /usr/bin/python # -*- coding: utf-8 -*- import urllib, urllib2, itertools, threading, cookielib, Cookie, sys, time, hashlib, os from PyQt4 import QtCore, QtGui try: _fromUtf8 = QtCore.QString.fromUtf8 except AttributeError: _fromUtf8 = lambda s: s gui=QtGui.QApplication.processEvents texttoset="" class fun(): global texttoset def checkpassword(self): if ui.passwordcheck.isChecked()==True: return 1 else : return 0 def log(self, text): if text != False: firsttext=str(ui.console.toPlainText()) secondtext=firsttext+text+"\n" ui.console.setText(secondtext) log=open("log.log", "a") log.write(text+"\n") log.close() else : firsttext=str(ui.console.toPlainText()) secondtext=firsttext+texttoset+"\n" ui.console.setText(secondtext) log=open("log.log", "a") log.write(texttoset+"\n") log.close() def disable(self): MainWindow.setEnabled(False) pass def enable(self): MainWindow.setEnabled(True) pass def checkmethod(self): if ui.get.isChecked()==True: return 1 elif ui.post.isChecked()==True: return 2 else : return 0 def main(self): connecter() gui() f1.start() gui() time.sleep(3) gui() f2.start() gui() time.sleep(3) gui() f3.start() gui() time.sleep(3) gui() f4.start() gui() time.sleep(3) gui() f5.start() gui() self.sleep(3) gui() f6.start() gui() def killer(self): f1.terminate() f2.terminate() f3.terminate() f4.terminate() f5.terminate() f6.terminate() def close(self): self.killer() os.abort() sys.exit() myfun=fun() def connecter(): QtCore.QObject.connect(f1, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f1, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f1, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f2, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f2, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f2, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f3, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f3, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f3, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f4, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f4, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f4, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f5, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f5, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f5, QtCore.SIGNAL("disable()"), myfun.disable) QtCore.QObject.connect(f6, QtCore.SIGNAL("log(bool)"), myfun.log) QtCore.QObject.connect(f6, QtCore.SIGNAL("enable()"), myfun.enable) QtCore.QObject.connect(f6, QtCore.SIGNAL("disable()"), myfun.disable) x=0 num=0 class flooderthread(QtCore.QThread): global texttoset def __init__(self, x, num): QtCore.QThread.__init__(self) self.x=x self.num=num def log(self, text): texttolog=str(text) time.sleep(1) self.emit(QtCore.SIGNAL("log(bool)"), False) time.sleep(2) def enable(self): time.sleep(1) self.emit(QtCore.SIGNAL("enable()")) def disable(self): time.sleep(1) self.emit(QtCore.SIGNAL("disable()")) def run(self): connecter() self.log("\n\n--------------------------------------------------new session-------------------------------------\n\n") itered=False gui() self.disable() gui() self.log("setting params...") param={ui.dataname1.text():ui.datavalue1.text(),ui.dataname3.text():ui.datavalue3.text(),ui.dataname3.text():ui.datavalue3.text(), } self.log("checking password...") if myfun.checkpassword()==1: itered=True self.log("password is true") else : self.log("password is null ") self.log("itered operation") self.log("setting url") url=str(ui.url.text()) if url[:4]!="http" and url[:3]!="ftp": self.log("url error exiting the whole function") self.log("please set a valide protocole!!") gui() self.enable() gui() return 1 pass else : self.log("valid url") gui() self.log("url is "+url) self.log("setting proxy") proxy="http://"+ui.proxyuser.text()+":"+ui.proxypass.text()+"@"+ui.proxyhost.text()+":"+ui.proxyport.text() self.log("proxy is "+proxy) gui() self.log("preparing params...") urlparam=urllib.urlencode(param) gui() self.log("params are "+urlparam) self.log("setting up headers...") header={'User-Agent':str(ui.useragent.toPlainText())} self.log("headers are "+ str(header)) self.log("setting up proxy handler..") proxyhandler=urllib2.ProxyHandler({"http":str(proxy)}) self.log("checking method") if myfun.checkmethod()==1: self.log("method is get..") self.log("setting request..") finalurl=url+urlparam gui() self.log("final url is"+finalurl) req=urllib2.Request(finalurl, None, headers) elif myfun.checkmethod()==2: self.log("method is post...") self.log("setting request..") finalurl=url gui() self.log("final url is "+finalurl) req=urllib2.Request(finalurl, urlparam, header) else : self.log("error has been accourded") self.log("please select a method!!") gui() self.log("exiting the whole functions") gui() self.enable() return 1 pass self.log("intilizing cookies..") c1=Cookie.SimpleCookie() c1[str(ui.cookiename1.text())]=str(ui.cookievalue1.text()) c1[str(ui.cookiename1.text())]['path']='/' c1[str(ui.cookiename2.text())]=str(ui.cookievalue2.text()) c1[str(ui.cookiename2.text())]['path']='/' c1[str(ui.cookiename3.text())]=str(ui.cookievalue3.text()) c1[str(ui.cookiename3.text())]['domain']=url c1[str(ui.cookiename3.text())]['path']='/' c1[str(ui.cookiename4.text())]=str(ui.cookievalue4.text()) c1[str(ui.cookiename4.text())]['domain']=url c1[str(ui.cookiename4.text())]['path']='/' self.log("cookies are.. :"+str(c1)) cj=cookielib.CookieJar() cj.set_cookie(c1) opener = urllib2.build_opener(proxyhandler, urllib2.HTTPCookieProcessor(cj)) self.log("insatlling opener") urllib2.install_opener(opener) self.log("setting the two operations....") if itered==Fasle: self.log("starting the flooding loop") gui() while true: try: gui() opener.open(req) except e: self.log("error connecting : "+e.reason) self.log("will continue....") continue gui() elif itered==True: pass f1=flooderthread(1, 1) f2=flooderthread(2, 2) f3=flooderthread(3, 3) f4=flooderthread(4, 4) f5=flooderthread(5, 5) f6=flooderthread(6, 6) class Ui_MainWindow(object): def setupUi(self, MainWindow): MainWindow.setObjectName(_fromUtf8("MainWindow")) MainWindow.setMinimumSize(QtCore.QSize(838, 500)) MainWindow.setMaximumSize(QtCore.QSize(838, 500)) MainWindow.setWindowTitle(QtGui.QApplication.translate("MainWindow", "memo flooder", None, QtGui.QApplication.UnicodeUTF8)) self.centralwidget = QtGui.QWidget(MainWindow) self.centralwidget.setObjectName(_fromUtf8("centralwidget")) self.console=QtGui.QTextEdit(self.centralwidget) self.console.setGeometry(10, 350, 800,130) self.console.setReadOnly(True) self.console.setObjectName("console") self.groupBox = QtGui.QGroupBox(self.centralwidget) self.groupBox.setGeometry(QtCore.QRect(30, 50, 71, 80)) self.groupBox.setTitle(QtGui.QApplication.translate("MainWindow", "method:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox.setObjectName(_fromUtf8("groupBox")) self.post = QtGui.QRadioButton(self.groupBox) self.post.setGeometry(QtCore.QRect(10, 20, 61, 22)) self.post.setText(QtGui.QApplication.translate("MainWindow", "post", None, QtGui.QApplication.UnicodeUTF8)) self.post.setChecked(True) self.post.setObjectName(_fromUtf8("post")) self.get = QtGui.QRadioButton(self.groupBox) self.get.setGeometry(QtCore.QRect(10, 50, 51, 22)) self.get.setText(QtGui.QApplication.translate("MainWindow", "get", None, QtGui.QApplication.UnicodeUTF8)) self.get.setObjectName(_fromUtf8("get")) self.url = QtGui.QLineEdit(self.centralwidget) self.url.setGeometry(QtCore.QRect(70, 20, 671, 27)) self.url.setInputMethodHints(QtCore.Qt.ImhUrlCharactersOnly) self.url.setObjectName(_fromUtf8("url")) self.groupBox_2 = QtGui.QGroupBox(self.centralwidget) self.groupBox_2.setGeometry(QtCore.QRect(110, 50, 371, 111)) self.groupBox_2.setTitle(QtGui.QApplication.translate("MainWindow", "data:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_2.setObjectName(_fromUtf8("groupBox_2")) self.dataname1 = QtGui.QLineEdit(self.groupBox_2) self.dataname1.setGeometry(QtCore.QRect(20, 30, 101, 27)) self.dataname1.setObjectName(_fromUtf8("dataname1")) self.label = QtGui.QLabel(self.groupBox_2) self.label.setGeometry(QtCore.QRect(40, 10, 67, 17)) self.label.setText(QtGui.QApplication.translate("MainWindow", "name:", None, QtGui.QApplication.UnicodeUTF8)) self.label.setObjectName(_fromUtf8("label")) self.dataname2 = QtGui.QLineEdit(self.groupBox_2) self.dataname2.setGeometry(QtCore.QRect(130, 30, 113, 27)) self.dataname2.setObjectName(_fromUtf8("dataname2")) self.dataname3 = QtGui.QLineEdit(self.groupBox_2) self.dataname3.setGeometry(QtCore.QRect(250, 30, 113, 27)) self.dataname3.setObjectName(_fromUtf8("dataname3")) self.label_2 = QtGui.QLabel(self.groupBox_2) self.label_2.setGeometry(QtCore.QRect(40, 60, 67, 17)) self.label_2.setText(QtGui.QApplication.translate("MainWindow", "value:", None, QtGui.QApplication.UnicodeUTF8)) self.label_2.setObjectName(_fromUtf8("label_2")) self.datavalue1 = QtGui.QLineEdit(self.groupBox_2) self.datavalue1.setGeometry(QtCore.QRect(20, 80, 101, 27)) self.datavalue1.setObjectName(_fromUtf8("datavalue1")) self.datavalue2 = QtGui.QLineEdit(self.groupBox_2) self.datavalue2.setGeometry(QtCore.QRect(130, 80, 113, 27)) self.datavalue2.setObjectName(_fromUtf8("datavalue2")) self.datavalue3 = QtGui.QLineEdit(self.groupBox_2) self.datavalue3.setGeometry(QtCore.QRect(250, 80, 113, 27)) self.datavalue3.setObjectName(_fromUtf8("datavalue3")) self.groupBox_4 = QtGui.QGroupBox(self.centralwidget) self.groupBox_4.setGeometry(QtCore.QRect(670, 50, 151, 111)) self.groupBox_4.setTitle(QtGui.QApplication.translate("MainWindow", "password:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_4.setObjectName(_fromUtf8("groupBox_4")) self.passname = QtGui.QLineEdit(self.groupBox_4) self.passname.setGeometry(QtCore.QRect(10, 30, 113, 27)) self.passname.setObjectName(_fromUtf8("passname")) self.passvalue = QtGui.QLineEdit(self.groupBox_4) self.passvalue.setGeometry(QtCore.QRect(10, 80, 113, 27)) self.passvalue.setObjectName(_fromUtf8("passvalue")) self.passwordcheck = QtGui.QCheckBox(self.centralwidget) self.passwordcheck.setGeometry(QtCore.QRect(670, 180, 97, 22)) self.passwordcheck.setText(QtGui.QApplication.translate("MainWindow", "password", None, QtGui.QApplication.UnicodeUTF8)) self.passwordcheck.setChecked(True) self.passwordcheck.setObjectName(_fromUtf8("passwordcheck")) self.groupBox_5 = QtGui.QGroupBox(self.centralwidget) self.groupBox_5.setGeometry(QtCore.QRect(29, 169, 441, 81)) self.groupBox_5.setTitle(QtGui.QApplication.translate("MainWindow", "proxy:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_5.setObjectName(_fromUtf8("groupBox_5")) self.proxyhost = QtGui.QLineEdit(self.groupBox_5) self.proxyhost.setGeometry(QtCore.QRect(20, 30, 113, 27)) self.proxyhost.setObjectName(_fromUtf8("proxyhost")) self.proxyport = QtGui.QLineEdit(self.groupBox_5) self.proxyport.setGeometry(QtCore.QRect(140, 30, 51, 27)) self.proxyport.setInputMethodHints(QtCore.Qt.ImhDigitsOnly|QtCore.Qt.ImhPreferNumbers) self.proxyport.setObjectName(_fromUtf8("proxyport")) self.proxyuser = QtGui.QLineEdit(self.groupBox_5) self.proxyuser.setGeometry(QtCore.QRect(200, 30, 113, 27)) self.proxyuser.setObjectName(_fromUtf8("proxyuser")) self.proxypass = QtGui.QLineEdit(self.groupBox_5) self.proxypass.setGeometry(QtCore.QRect(320, 30, 113, 27)) self.proxypass.setObjectName(_fromUtf8("proxypass")) self.label_4 = QtGui.QLabel(self.groupBox_5) self.label_4.setGeometry(QtCore.QRect(100, 10, 67, 17)) self.label_4.setText(QtGui.QApplication.translate("MainWindow", "host", None, QtGui.QApplication.UnicodeUTF8)) self.label_4.setObjectName(_fromUtf8("label_4")) self.label_5 = QtGui.QLabel(self.groupBox_5) self.label_5.setGeometry(QtCore.QRect(150, 10, 67, 17)) self.label_5.setText(QtGui.QApplication.translate("MainWindow", "port", None, QtGui.QApplication.UnicodeUTF8)) self.label_5.setObjectName(_fromUtf8("label_5")) self.label_6 = QtGui.QLabel(self.groupBox_5) self.label_6.setGeometry(QtCore.QRect(200, 10, 67, 17)) self.label_6.setText(QtGui.QApplication.translate("MainWindow", "username", None, QtGui.QApplication.UnicodeUTF8)) self.label_6.setObjectName(_fromUtf8("label_6")) self.label_7 = QtGui.QLabel(self.groupBox_5) self.label_7.setGeometry(QtCore.QRect(320, 10, 67, 17)) self.label_7.setText(QtGui.QApplication.translate("MainWindow", "password", None, QtGui.QApplication.UnicodeUTF8)) self.label_7.setObjectName(_fromUtf8("label_7")) self.groupBox_6 = QtGui.QGroupBox(self.centralwidget) self.groupBox_6.setGeometry(QtCore.QRect(30, 260, 531, 91)) self.groupBox_6.setTitle(QtGui.QApplication.translate("MainWindow", "cookies:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_6.setObjectName(_fromUtf8("groupBox_6")) self.cookiename1 = QtGui.QLineEdit(self.groupBox_6) self.cookiename1.setGeometry(QtCore.QRect(10, 20, 113, 27)) self.cookiename1.setObjectName(_fromUtf8("cookiename1")) self.cookiename2 = QtGui.QLineEdit(self.groupBox_6) self.cookiename2.setGeometry(QtCore.QRect(140, 20, 113, 27)) self.cookiename2.setObjectName(_fromUtf8("cookename2")) self.cookiename3 = QtGui.QLineEdit(self.groupBox_6) self.cookiename3.setGeometry(QtCore.QRect(270, 20, 113, 27)) self.cookiename3.setObjectName(_fromUtf8("cookiename3")) self.cookiename4 = QtGui.QLineEdit(self.groupBox_6) self.cookiename4.setGeometry(QtCore.QRect(390, 20, 113, 27)) self.cookiename4.setObjectName(_fromUtf8("cookiename4")) self.cookievalue1 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue1.setGeometry(QtCore.QRect(10, 50, 113, 27)) self.cookievalue1.setObjectName(_fromUtf8("cookievalue1")) self.cookievalue2 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue2.setGeometry(QtCore.QRect(140, 50, 113, 27)) self.cookievalue2.setObjectName(_fromUtf8("cookievalue2")) self.cookievalue3 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue3.setGeometry(QtCore.QRect(270, 50, 113, 27)) self.cookievalue3.setObjectName(_fromUtf8("cookievalue3")) self.cookievalue4 = QtGui.QLineEdit(self.groupBox_6) self.cookievalue4.setGeometry(QtCore.QRect(390, 50, 113, 27)) self.cookievalue4.setObjectName(_fromUtf8("cookievalue4")) self.groupBox_7 = QtGui.QGroupBox(self.centralwidget) self.groupBox_7.setGeometry(QtCore.QRect(570, 260, 251, 80)) self.groupBox_7.setTitle(QtGui.QApplication.translate("MainWindow", "useragents:", None, QtGui.QApplication.UnicodeUTF8)) self.groupBox_7.setObjectName(_fromUtf8("groupBox_7")) self.useragent = QtGui.QTextEdit(self.groupBox_7) self.useragent.setGeometry(QtCore.QRect(10, 20, 211, 51)) self.useragent.setVerticalScrollBarPolicy(QtCore.Qt.ScrollBarAlwaysOn) self.useragent.setObjectName(_fromUtf8("useragent")) self.start = QtGui.QPushButton(self.centralwidget) self.start.setGeometry(QtCore.QRect(750, 20, 71, 27)) self.start.setText(QtGui.QApplication.translate("MainWindow", "start", None, QtGui.QApplication.UnicodeUTF8)) self.start.setObjectName(_fromUtf8("start")) self.label_3 = QtGui.QLabel(self.centralwidget) self.label_3.setGeometry(QtCore.QRect(30, 20, 67, 17)) self.label_3.setText(QtGui.QApplication.translate("MainWindow", "url :", None, QtGui.QApplication.UnicodeUTF8)) self.label_3.setObjectName(_fromUtf8("label_3")) MainWindow.setCentralWidget(self.centralwidget) QtCore.QObject.connect(self.start, QtCore.SIGNAL(_fromUtf8("clicked(bool)")), myfun.main) QtCore.QObject.connect(self.passwordcheck, QtCore.SIGNAL(_fromUtf8("clicked(bool)")), self.groupBox_4.setEnabled) QtCore.QMetaObject.connectSlotsByName(MainWindow) def __del__(): myfun.killer() os.abort() sys.exit() app = QtGui.QApplication(sys.argv) MainWindow = QtGui.QMainWindow() ui = Ui_MainWindow() ui.setupUi(MainWindow) myfun.log("\n\n--------------------------------------------------new session-------------------------------------\n\n") MainWindow.show() sys.exit(app.exec_())

    Read the article

  • Android app crashes on emulator - logCat shows no errors

    - by David Miler
    I have just added the SherlockActionBar library to my android project. After some small changes (FragmentActivity - SherlockFragmentActivity, getActionBar() - getSupportActionBar(), imports) it all compiled nicely. After I run the app, however, the debugger stops, as though it had encountered an exception. However, there are no errors shown in the LogCat output. I just can't wrap my head around what's going on. Here is the logCat output after I terminate the app. 10-02 14:11:19.227: I/SystemUpdateService(174): UpdateTask at time 1349187079227 10-02 14:11:19.237: I/ActivityThread(328): Pub com.android.email.attachmentprovider: com.android.email.provider.AttachmentProvider 10-02 14:11:19.687: I/dalvikvm(81): Jit: resizing JitTable from 512 to 1024 10-02 14:11:19.809: D/MediaScannerService(150): start scanning volume internal: [/system/media] 10-02 14:11:20.047: V/AlarmClock(239): AlarmInitReceiver finished 10-02 14:11:20.087: I/ActivityManager(81): Start proc com.android.quicksearchbox for broadcast com.android.quicksearchbox/.SearchWidgetProvider: pid=346 uid=10012 gids={3003} 10-02 14:11:20.127: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = false, running = false 10-02 14:11:20.427: I/ActivityThread(346): Pub com.android.quicksearchbox.google: com.android.quicksearchbox.google.GoogleSuggestionProvider 10-02 14:11:20.497: I/ActivityThread(346): Pub com.android.quicksearchbox.shortcuts: com.android.quicksearchbox.ShortcutsProvider 10-02 14:11:20.657: I/ActivityManager(81): Start proc com.android.music for broadcast com.android.music/.MediaAppWidgetProvider: pid=358 uid=10028 gids={3003, 1015} 10-02 14:11:20.927: D/ExchangeService(320): !!! EAS ExchangeService, onCreate 10-02 14:11:20.967: D/dalvikvm(260): GC_CONCURRENT freed 213K, 6% free 6409K/6791K, paused 5ms+101ms 10-02 14:11:21.077: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:21.567: D/GTalkService(174): [ReonnectMgr] ### report Inet condition: status=false, networkType=0 10-02 14:11:21.587: D/ConnectivityService(81): reportNetworkCondition(0, 0) 10-02 14:11:21.597: D/ConnectivityService(81): Inet connectivity change, net=0, condition=0,mActiveDefaultNetwork=0 10-02 14:11:21.597: D/ConnectivityService(81): starting a change hold 10-02 14:11:21.697: D/GTalkService(174): [RawStanzaProvidersMgr] ##### searchProvidersFromIntent 10-02 14:11:21.697: D/GTalkService(174): [RawStanzaProvidersMgr] no intent receivers found 10-02 14:11:21.847: I/SystemUpdateService(174): cancelUpdate (empty URL) 10-02 14:11:21.847: E/TelephonyManager(174): Hidden constructor called more than once per process! 10-02 14:11:21.867: D/dalvikvm(174): GC_CONCURRENT freed 337K, 7% free 6561K/7047K, paused 5ms+4ms 10-02 14:11:21.917: D/GTalkService(174): [ReonnectMgr] ### report Inet condition: status=false, networkType=0 10-02 14:11:21.917: D/ConnectivityService(81): reportNetworkCondition(0, 0) 10-02 14:11:21.917: D/ConnectivityService(81): Inet connectivity change, net=0, condition=0,mActiveDefaultNetwork=0 10-02 14:11:21.917: D/ConnectivityService(81): currently in hold - not setting new end evt 10-02 14:11:21.990: E/TelephonyManager(174): Original: com.google.android.location, new: com.google.android.gsf 10-02 14:11:22.027: I/SystemUpdateService(174): removeAllDownloads (cancelUpdate) 10-02 14:11:22.127: D/dalvikvm(328): GC_CONCURRENT freed 205K, 6% free 6506K/6855K, paused 660ms+3ms 10-02 14:11:22.197: D/Eas Debug(320): Logging: 10-02 14:11:22.319: D/dalvikvm(81): GREF has increased to 401 10-02 14:11:22.947: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:23.130: D/Eas Debug(320): Logging: 10-02 14:11:23.307: I//system/bin/fsck_msdos(29): Attempting to allocate 2044 KB for FAT 10-02 14:11:23.560: I/ActivityManager(81): Starting: Intent { flg=0x10000000 cmp=com.google.android.gsf/.update.SystemUpdateInstallDialog } from pid 174 10-02 14:11:23.587: I/ActivityManager(81): Starting: Intent { flg=0x10000000 cmp=com.google.android.gsf/.update.SystemUpdateDownloadDialog } from pid 174 10-02 14:11:24.087: W/ActivityManager(81): Activity pause timeout for ActivityRecord{407c7320 com.android.launcher/com.android.launcher2.Launcher} 10-02 14:11:24.237: E/TelephonyManager(174): Hidden constructor called more than once per process! 10-02 14:11:24.237: E/TelephonyManager(174): Original: com.google.android.location, new: com.google.android.gsf 10-02 14:11:24.507: D/dalvikvm(174): GC_EXPLICIT freed 231K, 7% free 6596K/7047K, paused 4ms+6ms 10-02 14:11:24.607: D/ConnectivityService(81): Inet hold end, net=0, condition =0, published condition =0 10-02 14:11:24.607: D/ConnectivityService(81): no change in condition - aborting 10-02 14:11:24.707: D/dalvikvm(174): GC_EXPLICIT freed 17K, 7% free 6579K/7047K, paused 4ms+4ms 10-02 14:11:24.947: I//system/bin/fsck_msdos(29): ** Phase 2 - Check Cluster Chains 10-02 14:11:25.117: I//system/bin/fsck_msdos(29): ** Phase 3 - Checking Directories 10-02 14:11:25.128: I//system/bin/fsck_msdos(29): ** Phase 4 - Checking for Lost Files 10-02 14:11:25.167: I//system/bin/fsck_msdos(29): 12 files, 1044448 free (522224 clusters) 10-02 14:11:25.227: I/Vold(29): Filesystem check completed OK 10-02 14:11:25.227: I/Vold(29): Device /dev/block/vold/179:0, target /mnt/sdcard mounted @ /mnt/secure/staging 10-02 14:11:25.237: D/Vold(29): Volume sdcard state changing 3 (Checking) -> 4 (Mounted) 10-02 14:11:25.257: I/PackageManager(81): Updating external media status from unmounted to mounted 10-02 14:11:25.457: D/dalvikvm(303): GC_EXPLICIT freed 35K, 6% free 6242K/6595K, paused 3ms+312ms 10-02 14:11:25.987: D/ExchangeService(320): !!! EAS ExchangeService, onStartCommand, startingUp = true, running = false 10-02 14:11:26.157: D/MediaScanner(150): prescan time: 2905ms 10-02 14:11:26.167: D/MediaScanner(150): scan time: 148ms 10-02 14:11:26.167: D/MediaScanner(150): postscan time: 2ms 10-02 14:11:26.167: D/MediaScanner(150): total time: 3055ms 10-02 14:11:26.197: D/MediaScannerService(150): done scanning volume internal 10-02 14:11:26.237: D/MediaScannerService(150): start scanning volume external: [/mnt/sdcard] 10-02 14:11:26.497: D/dalvikvm(143): GC_EXPLICIT freed 234K, 8% free 7735K/8327K, paused 3ms+5ms 10-02 14:11:27.180: D/dalvikvm(143): GC_CONCURRENT freed 150K, 4% free 8004K/8327K, paused 7ms+3ms 10-02 14:11:27.397: D/dalvikvm(143): GC_FOR_ALLOC freed 96K, 6% free 8310K/8775K, paused 76ms 10-02 14:11:27.580: D/dalvikvm(143): GC_FOR_ALLOC freed 515K, 11% free 8135K/9095K, paused 79ms 10-02 14:11:27.829: D/dalvikvm(143): GC_CONCURRENT freed 3K, 5% free 8694K/9095K, paused 7ms+6ms 10-02 14:11:28.137: V/TLINE(143): new: android.text.TextLine@4065b280 10-02 14:11:28.527: D/dalvikvm(143): GC_CONCURRENT freed 729K, 10% free 8764K/9671K, paused 5ms+13ms 10-02 14:11:28.677: D/dalvikvm(143): GC_FOR_ALLOC freed 152K, 11% free 8683K/9671K, paused 99ms 10-02 14:11:28.717: I/dalvikvm-heap(143): Grow heap (frag case) to 11.434MB for 2975968-byte allocation 10-02 14:11:28.807: D/dalvikvm(143): GC_FOR_ALLOC freed 0K, 9% free 11589K/12615K, paused 84ms 10-02 14:11:29.159: D/dalvikvm(143): GC_CONCURRENT freed 197K, 7% free 12195K/12999K, paused 8ms+6ms 10-02 14:11:29.647: D/dalvikvm(143): GC_EXPLICIT freed 351K, 6% free 12790K/13511K, paused 8ms+17ms 10-02 14:11:29.717: I/SurfaceFlinger(32): Boot is finished (70768 ms) 10-02 14:11:29.877: I/ARMAssembler(32): generated scanline__00000177:03010104_00000002_00000000 [ 44 ipp] (66 ins) at [0x407c7290:0x407c7398] in 990662 ns 10-02 14:11:29.907: I/ARMAssembler(32): generated scanline__00000177:03515104_00000001_00000000 [ 73 ipp] (95 ins) at [0x407c73a0:0x407c751c] in 989381 ns 10-02 14:11:30.287: D/dalvikvm(174): GC_EXPLICIT freed 25K, 8% free 6554K/7047K, paused 4ms+32ms 10-02 14:11:30.380: D/dalvikvm(143): GC_EXPLICIT freed 349K, 6% free 13124K/13895K, paused 5ms+25ms 10-02 14:11:30.957: D/dalvikvm(143): GC_FOR_ALLOC freed 1069K, 10% free 13860K/15239K, paused 81ms 10-02 14:11:32.177: D/dalvikvm(150): GC_CONCURRENT freed 183K, 6% free 6438K/6791K, paused 5ms+4ms 10-02 14:11:32.187: W/ActivityManager(81): No content provider found for: 10-02 14:11:32.607: V/MediaScanner(150): pruneDeadThumbnailFiles... android.database.sqlite.SQLiteCursor@406724a8 10-02 14:11:32.617: V/MediaScanner(150): /pruneDeadThumbnailFiles... android.database.sqlite.SQLiteCursor@406724a8 10-02 14:11:32.640: W/ActivityManager(81): No content provider found for: 10-02 14:11:32.640: D/VoldCmdListener(29): asec list 10-02 14:11:32.647: I/PackageManager(81): No secure containers on sdcard 10-02 14:11:32.667: D/MediaScanner(150): prescan time: 107ms 10-02 14:11:32.667: D/MediaScanner(150): scan time: 89ms 10-02 14:11:32.667: D/MediaScanner(150): postscan time: 61ms 10-02 14:11:32.667: D/MediaScanner(150): total time: 257ms 10-02 14:11:32.697: W/PackageManager(81): Unknown permission android.permission.ADD_SYSTEM_SERVICE in package com.android.phone 10-02 14:11:32.707: W/PackageManager(81): Unknown permission com.android.smspush.WAPPUSH_MANAGER_BIND in package com.android.phone 10-02 14:11:32.737: W/PackageManager(81): Not granting permission android.permission.SEND_DOWNLOAD_COMPLETED_INTENTS to package com.android.browser (protectionLevel=2 flags=0x9be45) 10-02 14:11:32.737: W/PackageManager(81): Not granting permission android.permission.BIND_APPWIDGET to package com.android.widgetpreview (protectionLevel=3 flags=0x28be44) 10-02 14:11:32.767: W/PackageManager(81): Unknown permission android.permission.READ_OWNER_DATA in package com.android.exchange 10-02 14:11:32.778: W/PackageManager(81): Unknown permission android.permission.READ_OWNER_DATA in package com.android.email 10-02 14:11:32.788: W/PackageManager(81): Unknown permission com.android.providers.im.permission.READ_ONLY in package com.google.android.apps.maps 10-02 14:11:32.797: W/PackageManager(81): Not granting permission android.permission.DEVICE_POWER to package com.android.deskclock (protectionLevel=2 flags=0x8be45) 10-02 14:11:33.137: D/MediaScannerService(150): done scanning volume external 10-02 14:11:33.197: D/PackageParser(81): Scanning package: /data/app/vmdl257911298.tmp 10-02 14:11:33.837: I/InputReader(81): Device reconfigured: id=0, name='qwerty2', surface size is now 1024x800 10-02 14:11:34.097: D/dalvikvm(81): GC_CONCURRENT freed 12185K, 47% free 13966K/26311K, paused 8ms+23ms 10-02 14:11:36.798: I/TabletStatusBar(124): DISABLE_CLOCK: no 10-02 14:11:36.798: I/TabletStatusBar(124): DISABLE_NAVIGATION: no 10-02 14:11:37.348: I/ARMAssembler(32): generated scanline__00000177:03515104_00001001_00000000 [ 91 ipp] (114 ins) at [0x407c7520:0x407c76e8] in 919320 ns 10-02 14:11:37.598: I/TabletStatusBar(124): DISABLE_BACK: no 10-02 14:11:37.710: I/ActivityManager(81): Displayed com.android.launcher/com.android.launcher2.Launcher: +46s212ms 10-02 14:11:38.817: D/dalvikvm(143): GC_CONCURRENT freed 969K, 8% free 14867K/16007K, paused 4ms+10ms 10-02 14:11:39.437: I/dalvikvm(81): Jit: resizing JitTable from 1024 to 2048 10-02 14:11:40.267: D/dalvikvm(143): GC_FOR_ALLOC freed 2357K, 16% free 14395K/17031K, paused 80ms 10-02 14:11:40.717: D/dalvikvm(143): GC_EXPLICIT freed 742K, 16% free 14358K/17031K, paused 8ms+4ms 10-02 14:11:41.617: D/dalvikvm(81): GC_CONCURRENT freed 1955K, 48% free 13869K/26311K, paused 9ms+10ms 10-02 14:11:42.559: D/dalvikvm(81): GC_CONCURRENT freed 1830K, 48% free 13881K/26311K, paused 9ms+9ms 10-02 14:11:42.758: I/PackageManager(81): Removing non-system package:cz.trilimi.sfaui 10-02 14:11:42.758: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:42.967: D/PackageManager(81): Scanning package cz.trilimi.sfaui 10-02 14:11:42.967: I/PackageManager(81): Package cz.trilimi.sfaui codePath changed from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk; Retaining data and using new 10-02 14:11:42.967: I/PackageManager(81): Unpacking native libraries for /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:43.097: D/installd(35): DexInv: --- BEGIN '/data/app/cz.trilimi.sfaui-2.apk' --- 10-02 14:11:45.317: D/dalvikvm(391): DexOpt: load 434ms, verify+opt 1260ms 10-02 14:11:45.407: D/installd(35): DexInv: --- END '/data/app/cz.trilimi.sfaui-2.apk' (success) --- 10-02 14:11:45.407: W/PackageManager(81): Code path for pkg : cz.trilimi.sfaui changing from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.407: W/PackageManager(81): Resource path for pkg : cz.trilimi.sfaui changing from /data/app/cz.trilimi.sfaui-1.apk to /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.407: D/PackageManager(81): Activities: cz.trilimi.sfaui.ItemListActivity cz.trilimi.sfaui.ItemDetailActivity 10-02 14:11:45.427: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:45.657: I/installd(35): move /data/dalvik-cache/data@[email protected]@classes.dex -> /data/dalvik-cache/data@[email protected]@classes.dex 10-02 14:11:45.657: D/PackageManager(81): New package installed in /data/app/cz.trilimi.sfaui-2.apk 10-02 14:11:45.997: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:46.147: D/dalvikvm(143): GC_EXPLICIT freed 3K, 16% free 14356K/17031K, paused 10ms+9ms 10-02 14:11:46.237: D/PackageManager(81): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged 10-02 14:11:46.277: D/PackageManager(81): generateServicesMap(android.content.SyncAdapter): 5 services unchanged 10-02 14:11:46.337: D/PackageManager(81): generateServicesMap(android.accounts.AccountAuthenticator): 3 services unchanged 10-02 14:11:46.347: D/PackageManager(81): generateServicesMap(android.content.SyncAdapter): 5 services unchanged 10-02 14:11:46.437: D/dalvikvm(208): GC_EXPLICIT freed 258K, 7% free 6488K/6919K, paused 3ms+5ms 10-02 14:11:46.477: W/RecognitionManagerService(81): no available voice recognition services found 10-02 14:11:46.897: I/ActivityManager(81): Start proc com.svox.pico for broadcast com.svox.pico/.VoiceDataInstallerReceiver: pid=398 uid=10006 gids={} 10-02 14:11:47.087: I/ActivityThread(398): Pub com.svox.pico.providers.SettingsProvider: com.svox.pico.providers.SettingsProvider 10-02 14:11:47.138: D/GTalkService(174): [GTalkService.1] handlePackageInstalled: re-initialize providers 10-02 14:11:47.147: D/GTalkService(174): [RawStanzaProvidersMgr] ##### searchProvidersFromIntent 10-02 14:11:47.147: D/GTalkService(174): [RawStanzaProvidersMgr] no intent receivers found 10-02 14:11:47.718: I/AccountTypeManager(208): Loaded meta-data for 1 account types, 0 accounts in 186ms 10-02 14:11:48.377: D/dalvikvm(143): GC_CONCURRENT freed 1865K, 15% free 14513K/17031K, paused 7ms+4ms 10-02 14:11:48.917: D/dalvikvm(208): GC_CONCURRENT freed 219K, 6% free 6788K/7175K, paused 7ms+73ms 10-02 14:11:49.207: D/dalvikvm(143): GC_FOR_ALLOC freed 4558K, 31% free 11866K/17031K, paused 89ms 10-02 14:11:49.587: D/dalvikvm(143): GC_CONCURRENT freed 713K, 24% free 13010K/17031K, paused 5ms+4ms 10-02 14:11:49.967: D/dalvikvm(143): GC_CONCURRENT freed 1046K, 19% free 13922K/17031K, paused 5ms+4ms 10-02 14:11:50.437: D/dalvikvm(81): GC_EXPLICIT freed 898K, 47% free 13955K/26311K, paused 6ms+39ms 10-02 14:11:50.467: I/installd(35): unlink /data/dalvik-cache/data@[email protected]@classes.dex 10-02 14:11:50.477: D/AndroidRuntime(227): Shutting down VM 10-02 14:11:50.507: D/dalvikvm(227): GC_CONCURRENT freed 97K, 84% free 331K/2048K, paused 1ms+2ms 10-02 14:11:50.507: I/AndroidRuntime(227): NOTE: attach of thread 'Binder Thread #3' failed 10-02 14:11:50.517: D/jdwp(227): adbd disconnected 10-02 14:11:51.177: D/AndroidRuntime(410): >>>>>> AndroidRuntime START com.android.internal.os.RuntimeInit <<<<<< 10-02 14:11:51.177: D/AndroidRuntime(410): CheckJNI is ON 10-02 14:11:51.897: D/AndroidRuntime(410): Calling main entry com.android.commands.am.Am 10-02 14:11:51.937: I/ActivityManager(81): Force stopping package cz.trilimi.sfaui uid=10036 10-02 14:11:51.937: I/ActivityManager(81): Starting: Intent { act=android.intent.action.MAIN cat=[android.intent.category.LAUNCHER] flg=0x10000000 cmp=cz.trilimi.sfaui/.ItemListActivity } from pid 410 10-02 14:11:51.968: W/WindowManager(81): Failure taking screenshot for (230x179) to layer 21005 10-02 14:11:51.997: I/ActivityManager(81): Start proc cz.trilimi.sfaui for activity cz.trilimi.sfaui/.ItemListActivity: pid=418 uid=10036 gids={} 10-02 14:11:52.007: D/AndroidRuntime(410): Shutting down VM 10-02 14:11:52.057: I/AndroidRuntime(410): NOTE: attach of thread 'Binder Thread #3' failed 10-02 14:11:52.097: D/dalvikvm(410): GC_CONCURRENT freed 98K, 83% free 360K/2048K, paused 1ms+0ms 10-02 14:11:52.097: D/jdwp(410): adbd disconnected 10-02 14:11:53.147: W/ActivityThread(418): Application cz.trilimi.sfaui is waiting for the debugger on port 8100... 10-02 14:11:53.207: I/System.out(418): Sending WAIT chunk 10-02 14:11:53.217: I/dalvikvm(418): Debugger is active 10-02 14:11:53.447: I/System.out(418): Debugger has connected 10-02 14:11:53.457: I/System.out(418): waiting for debugger to settle... 10-02 14:11:53.637: I/ARMAssembler(32): generated scanline__00000177:03515104_00001002_00000000 [ 87 ipp] (110 ins) at [0x407c76f0:0x407c78a8] in 598498 ns 10-02 14:11:53.660: I/System.out(418): waiting for debugger to settle... 10-02 14:11:53.857: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.057: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.257: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.317: V/TLINE(81): new: android.text.TextLine@4155dde8 10-02 14:11:54.467: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.667: I/System.out(418): waiting for debugger to settle... 10-02 14:11:54.870: I/System.out(418): waiting for debugger to settle... 10-02 14:11:55.027: D/dalvikvm(143): GC_EXPLICIT freed 900K, 16% free 14420K/17031K, paused 7ms+4ms 10-02 14:11:55.067: I/System.out(418): waiting for debugger to settle... 10-02 14:11:55.292: I/System.out(418): debugger has settled (1315) 10-02 14:12:02.008: W/ActivityManager(81): Launch timeout has expired, giving up wake lock! 10-02 14:12:02.971: W/ActivityManager(81): Activity idle timeout for ActivityRecord{4078c6b0 cz.trilimi.sfaui/.ItemListActivity} 10-02 14:12:08.359: D/ExchangeService(320): Received deviceId from Email app: androidc259148960 10-02 14:12:08.507: D/ExchangeService(320): Reconciling accounts... 10-02 14:16:11.437: D/SntpClient(81): request time failed: java.net.SocketException: Address family not supported by protocol 10-02 14:17:21.573: W/jdwp(418): Debugger is telling the VM to exit with code=1 10-02 14:17:21.573: I/dalvikvm(418): GC lifetime allocation: 8642 bytes 10-02 14:17:21.637: D/Zygote(33): Process 418 exited cleanly (1) 10-02 14:17:21.651: I/ActivityManager(81): Process cz.trilimi.sfaui (pid 418) has died. 10-02 14:17:21.847: D/dalvikvm(143): GC_EXPLICIT freed <1K, 16% free 14420K/17031K, paused 7ms+7ms 10-02 14:17:21.917: W/InputManagerService(81): Window already focused, ignoring focus gain of: com.android.internal.view.IInputMethodClient$Stub$Proxy@40bfbf28

    Read the article

  • How To Switch Back to Outlook 2007 After the 2010 Beta Ends

    - by Matthew Guay
    Are you switching back to Outlook 2007 after trying out Office 2010 beta?  Here’s how you can restore your Outlook data and keep everything working fine after the switch. Whenever you install a newer version of Outlook, it will convert your profile and data files to the latest format.  This makes them work the best in the newer version of Outlook, but may cause problems if you decide to revert to an older version.  If you installed Outlook 2010 beta, it automatically imported and converted your profile from Outlook 2007.  When the beta expires, you will either have to reinstall Office 2007 or purchase a copy of Office 2010. If you choose to reinstall Office 2007, you may notice an error message each time you open Outlook. Outlook will still work fine and all of your data will be saved, but this error message can get annoying.  Here’s how you can create a new profile, import all of your old data, and get rid of this error message. Banish the Error Message with a New Profile To get rid of this error message, we need to create a new Outlook profile.  First, make sure your Outlook data files are backed up.  Your messages, contacts, calendar, and more are stored in a .pst file in your appdata folder.  Enter the following in the address bar of an Explorer window to open your Outlook data folder, and replace username with your user name: C:\Users\username\AppData\Local\Microsoft\Outlook Copy the Outlook Personal Folders (.pst) files that contain your data. Its name is usually your email address, though it may have a different name.  If in doubt, select all of the Outlook Personal Folders files, copy them, and save them in another safe place (such as your Documents folder). Now, let’s remove your old profile.  Open Control Panel, and select Mail.  In Windows Vista or 7, simply enter “Mail” in the search box and select the first entry. Click the “Show Profiles…” button. Now, select your Outlook profile, and click Remove.  This will not delete your data files, but will remove them from Outlook. Press Yes to confirm that you wish to remove this profile. Open Outlook, and you will be asked to create a new profile.  Enter a name for your new profile, and press Ok. Now enter your email account information to setup Outlook as normal. Outlook will attempt to automatically configure your account settings.  This usually works for accounts with popular email systems, but if it fails to find your information you can enter it manually.  Press finish when everything’s done. Outlook will now go ahead and download messages from your email account.  In our test, we used a Gmail account that still had all of our old messages online.  Those files are backed up in our old Outlook data files, so we can save time and not download them.  Click the Send/Receive button on the bottom of the window, and select “Cancel Send/Receive”. Restore Your Old Outlook Data Let’s add our old Outlook file back to Outlook 2007.  Exit Outlook, and then go back to Control Panel, and select Mail as above.  This time, click the Data Files button. Click the Add button on the top left. Select “Office Outlook Personal Folders File (.pst)”, and click Ok. Now, select your old Outlook data file.  It should be in the folder that opens by default; if not, browse to the backup copy we saved earlier, and select it. Press Ok at the next dialog to accept the default settings. Now, select the data file we just imported, and click “Set as Default”. Now, all of your old messages, appointments, contacts, and everything else will be right in Outlook ready for you.  Click Ok, and then open Outlook to see the change. All of the data that was in Outlook 2010 is now ready to use in Outlook 2007.  You won’t have to wait to re-download all of your emails from the server since everything’s still here ready to be used.  And when you open Outlook, you won’t see any error messages, either! Conclusion Migrating your Outlook profile back to Outlook 2007 is fairly easy, and with these steps, you can avoid seeing an error message every time you open Outlook.  With all your data in tact, you’re ready to get back to work instead of getting frustrated with Outlook.  Many of us use webmail and keep all of our messages in the cloud, but even on broadband connections it can take a long time to download several gigabytes of emails. Similar Articles Productive Geek Tips Opening Attachments in Outlook 2007 by KeyboardQuickly Create Appointments from Tasks with Outlook 2007’s To-Do BarFix For Outlook 2007 Constantly Asking for Password on VistaPin Microsoft Outlook to the Desktop BackgroundOur Look at the LinkedIn Social Connector for Outlook TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Download Free MP3s from Amazon Awe inspiring, inter-galactic theme (Win 7) Case Study – How to Optimize Popular Wordpress Sites Restore Hidden Updates in Windows 7 & Vista Iceland an Insurance Job? Find Downloads and Add-ins for Outlook

    Read the article

  • C#: System.Lazy&lt;T&gt; and the Singleton Design Pattern

    - by James Michael Hare
    So we've all coded a Singleton at one time or another.  It's a really simple pattern and can be a slightly more elegant alternative to global variables.  Make no mistake, Singletons can be abused and are often over-used -- but occasionally you find a Singleton is the most elegant solution. For those of you not familiar with a Singleton, the basic Design Pattern is that a Singleton class is one where there is only ever one instance of the class created.  This means that constructors must be private to avoid users creating their own instances, and a static property (or method in languages without properties) is defined that returns a single static instance. 1: public class Singleton 2: { 3: // the single instance is defined in a static field 4: private static readonly Singleton _instance = new Singleton(); 5:  6: // constructor private so users can't instantiate on their own 7: private Singleton() 8: { 9: } 10:  11: // read-only property that returns the static field 12: public static Singleton Instance 13: { 14: get 15: { 16: return _instance; 17: } 18: } 19: } This is the most basic singleton, notice the key features: Static readonly field that contains the one and only instance. Constructor is private so it can only be called by the class itself. Static property that returns the single instance. Looks like it satisfies, right?  There's just one (potential) problem.  C# gives you no guarantee of when the static field _instance will be created.  This is because the C# standard simply states that classes (which are marked in the IL as BeforeFieldInit) can have their static fields initialized any time before the field is accessed.  This means that they may be initialized on first use, they may be initialized at some other time before, you can't be sure when. So what if you want to guarantee your instance is truly lazy.  That is, that it is only created on first call to Instance?  Well, there's a few ways to do this.  First we'll show the old ways, and then talk about how .Net 4.0's new System.Lazy<T> type can help make the lazy-Singleton cleaner. Obviously, we could take on the lazy construction ourselves, but being that our Singleton may be accessed by many different threads, we'd need to lock it down. 1: public class LazySingleton1 2: { 3: // lock for thread-safety laziness 4: private static readonly object _mutex = new object(); 5:  6: // static field to hold single instance 7: private static LazySingleton1 _instance = null; 8:  9: // property that does some locking and then creates on first call 10: public static LazySingleton1 Instance 11: { 12: get 13: { 14: if (_instance == null) 15: { 16: lock (_mutex) 17: { 18: if (_instance == null) 19: { 20: _instance = new LazySingleton1(); 21: } 22: } 23: } 24:  25: return _instance; 26: } 27: } 28:  29: private LazySingleton1() 30: { 31: } 32: } This is a standard double-check algorithm so that you don't lock if the instance has already been created.  However, because it's possible two threads can go through the first if at the same time the first time back in, you need to check again after the lock is acquired to avoid creating two instances. Pretty straightforward, but ugly as all heck.  Well, you could also take advantage of the C# standard's BeforeFieldInit and define your class with a static constructor.  It need not have a body, just the presence of the static constructor will remove the BeforeFieldInit attribute on the class and guarantee that no fields are initialized until the first static field, property, or method is called.   1: public class LazySingleton2 2: { 3: // because of the static constructor, this won't get created until first use 4: private static readonly LazySingleton2 _instance = new LazySingleton2(); 5:  6: // Returns the singleton instance using lazy-instantiation 7: public static LazySingleton2 Instance 8: { 9: get { return _instance; } 10: } 11:  12: // private to prevent direct instantiation 13: private LazySingleton2() 14: { 15: } 16:  17: // removes BeforeFieldInit on class so static fields not 18: // initialized before they are used 19: static LazySingleton2() 20: { 21: } 22: } Now, while this works perfectly, I hate it.  Why?  Because it's relying on a non-obvious trick of the IL to guarantee laziness.  Just looking at this code, you'd have no idea that it's doing what it's doing.  Worse yet, you may decide that the empty static constructor serves no purpose and delete it (which removes your lazy guarantee).  Worse-worse yet, they may alter the rules around BeforeFieldInit in the future which could change this. So, what do I propose instead?  .Net 4.0 adds the System.Lazy type which guarantees thread-safe lazy-construction.  Using System.Lazy<T>, we get: 1: public class LazySingleton3 2: { 3: // static holder for instance, need to use lambda to construct since constructor private 4: private static readonly Lazy<LazySingleton3> _instance 5: = new Lazy<LazySingleton3>(() => new LazySingleton3()); 6:  7: // private to prevent direct instantiation. 8: private LazySingleton3() 9: { 10: } 11:  12: // accessor for instance 13: public static LazySingleton3 Instance 14: { 15: get 16: { 17: return _instance.Value; 18: } 19: } 20: } Note, you need your lambda to call the private constructor as Lazy's default constructor can only call public constructors of the type passed in (which we can't have by definition of a Singleton).  But, because the lambda is defined inside our type, it has access to the private members so it's perfect. Note how the Lazy<T> makes it obvious what you're doing (lazy construction), instead of relying on an IL generation side-effect.  This way, it's more maintainable.  Lazy<T> has many other uses as well, obviously, but I really love how elegant and readable it makes the lazy Singleton.

    Read the article

  • Visual Studio 2010 and .NET 4 Released

    - by ScottGu
    The final release of Visual Studio 2010 and .NET 4 is now available. Download and Install Today MSDN subscribers, as well as WebsiteSpark/BizSpark/DreamSpark members, can now download the final releases of Visual Studio 2010 and TFS 2010 through the MSDN subscribers download center.  If you are not an MSDN Subscriber, you can download free 90-day trial editions of Visual Studio 2010.  Or you can can download the free Visual Studio express editions of Visual Web Developer 2010, Visual Basic 2010, Visual C# 2010 and Visual C++.  These express editions are available completely for free (and never time out).  If you are looking for an easy way to setup a new machine for web-development you can automate installing ASP.NET 4, ASP.NET MVC 2, IIS, SQL Server Express and Visual Web Developer 2010 Express really quickly with the Microsoft Web Platform Installer (just click the install button on the page). What is new with VS 2010 and .NET 4 Today’s release is a big one – and brings with it a ton of new feature and capabilities. One of the things we tried hard to focus on with this release was to invest heavily in making existing applications, projects and developer experiences better.  What this means is that you don’t need to read 1000+ page books or spend time learning major new concepts in order to take advantage of the release.  There are literally thousands of improvements (both big and small) that make you more productive and successful without having to learn big new concepts in order to start using them.  Below is just a small sampling of some of the improvements with this release: Visual Studio 2010 IDE  Visual Studio 2010 now supports multiple-monitors (enabling much better use of screen real-estate).  It has new code Intellisense support that makes it easier to find and use classes and methods. It has improved code navigation support for searching code-bases and seeing how code is called and used.  It has new code visualization support that allows you to see the relationships across projects and classes within projects, as well as to automatically generate sequence diagrams to chart execution flow.  The editor now supports HTML and JavaScript snippet support as well as improved JavaScript intellisense. The VS 2010 Debugger and Profiling support is now much, much richer and enables new features like Intellitrace (aka Historical Debugging), debugging of Crash/Dump files, and better parallel debugging.  VS 2010’s multi-targeting support is now much richer, and enables you to use VS 2010 to target .NET 2, .NET 3, .NET 3.5 and .NET 4 applications.  And the infamous Add Reference dialog now loads much faster. TFS 2010 is now easy to setup (you can now install the server in under 10 minutes) and enables great source-control, bug/work-item tracking, and continuous integration support.  Testing (both automated and manual) is now much, much richer.  And VS 2010 Premium and Ultimate provide much richer architecture and design tooling support. VB and C# Language Features VB and C# in VS 2010 both contain a bunch of new features and capabilities.  VB adds new support for automatic properties, collection initializers, and implicit line continuation support among many other features.  C# adds support for optional parameters and named arguments, a new dynamic keyword, co-variance and contra-variance, and among many other features. ASP.NET 4 and ASP.NET MVC 2 With ASP.NET 4, Web Forms controls now render clean, semantically correct, and CSS friendly HTML markup. Built-in URL routing functionality allows you to expose clean, search engine friendly, URLs and increase the traffic to your Website.  ViewState within applications can now be more easily controlled and made smaller.  ASP.NET Dynamic Data support has been expanded.  More controls, including rich charting and data controls, are now built-into ASP.NET 4 and enable you to build applications even faster.  New starter project templates now make it easier to get going with new projects.  SEO enhancements make it easier to drive traffic to your public facing sites.  And web.config files are now clean and simple. ASP.NET MVC 2 is now built-into VS 2010 and ASP.NET 4, and provides a great way to build web sites and applications using a model-view-controller based pattern. ASP.NET MVC 2 adds features to easily enable client and server validation logic, provides new strongly-typed HTML and UI-scaffolding helper methods.  It also enables more modular/reusable applications.  The new <%: %> syntax in ASP.NET makes it easier to HTML encode output.  Visual Studio 2010 also now includes better tooling support for unit testing and TDD.  In particular, “Consume first intellisense” and “generate from usage" support within VS 2010 make it easier to write your unit tests first, and then drive your implementation from them. Deploying ASP.NET applications gets a lot easier with this release. You can now publish your Websites and applications to a staging or production server from within Visual Studio itself. Visual Studio 2010 makes it easy to transfer all your files, code, configuration, database schema and data in one complete package. VS 2010 also makes it easy to manage separate web.config configuration files settings depending upon whether you are in debug, release, staging or production modes. WPF 4 and Silverlight 4 WPF 4 includes a ton of new improvements and capabilities including more built-in controls, richer graphics features (cached composition, pixel shader 3 support, layoutrounding, and animation easing functions), a much improved text stack (with crisper text rendering, custom dictionary support, and selection and caret brush options).  WPF 4 also includes a bunch of support to enable you to take advantage of new Windows 7 features – including multi-touch and Windows 7 shell integration. Silverlight 4 will launch this week as well.  You can watch my Silverlight 4 launch keynote streamed live Tuesday (April 13th) at 8am Pacific Time.  Silverlight 4 includes a ton of new capabilities – including a bunch for making it possible to build great business applications and out of the browser applications.  I’ll be doing a separate blog post later this week (once it is live on the web) that talks more about its capabilities. Visual Studio 2010 now includes great tooling support for both WPF and Silverlight.  The new VS 2010 WPF and Silverlight designer makes it much easier to build client applications as well as build great line of business solutions, as well as integrate and bind with data.  Tooling support for Silverlight 4 with the final release of Visual Studio 2010 will be available when Silverlight 4 releases to the web this week. SharePoint and Azure Visual Studio 2010 now includes built-in support for building SharePoint applications.  You can now create, edit, build, and debug SharePoint applications directly within Visual Studio 2010.  You can also now use SharePoint with TFS 2010. Support for creating Azure-hosted applications is also now included with VS 2010 – allowing you to build ASP.NET and WCF based applications and host them within the cloud. Data Access Data access has a lot of improvements coming to it with .NET 4.  Entity Framework 4 includes a ton of new features and capabilities – including support for model first and POCO development, default support for lazy loading, built-in support for pluralization/singularization of table/property names within the VS 2010 designer, full support for all the LINQ operators, the ability to optionally expose foreign keys on model objects (useful for some stateless web scenarios), disconnected API support to better handle N-Tier and stateless web scenarios, and T4 template customization support within VS 2010 to allow you to customize and automate how code is generated for you by the data designer.  In addition to improvements with the Entity Framework, LINQ to SQL with .NET 4 also includes a bunch of nice improvements.  WCF and Workflow WCF includes a bunch of great new capabilities – including better REST, activation and configuration support.  WCF Data Services (formerly known as Astoria) and WCF RIA Services also now enable you to easily expose and work with data from remote clients. Windows Workflow is now much faster, includes flowchart services, and now makes it easier to make custom services than before.  More details can be found here. CLR and Core .NET Library Improvements .NET 4 includes the new CLR 4 engine – which includes a lot of nice performance and feature improvements.  CLR 4 engine now runs side-by-side in-process with older versions of the CLR – allowing you to use two different versions of .NET within the same process.  It also includes improved COM interop support.  The .NET 4 base class libraries (BCL) include a bunch of nice additions and refinements.  In particular, the .NET 4 BCL now includes new parallel programming support that makes it much easier to build applications that take advantage of multiple CPUs and cores on a computer.  This work dove-tails nicely with the new VS 2010 parallel debugger (making it much easier to debug parallel applications), as well as the new F# functional language support now included in the VS 2010 IDE.  .NET 4 also now also has the Dynamic Language Runtime (DLR) library built-in – which makes it easier to use dynamic language functionality with .NET.  MEF – a really cool library that enables rich extensibility – is also now built-into .NET 4 and included as part of the base class libraries.  .NET 4 Client Profile The download size of the .NET 4 redist is now much smaller than it was before (the x86 full .NET 4 package is about 36MB).  We also now have a .NET 4 Client Profile package which is a pure sub-set of the full .NET that can be used to streamline client application installs. C++ VS 2010 includes a bunch of great improvements for C++ development.  This includes better C++ Intellisense support, MSBuild support for projects, improved parallel debugging and profiler support, MFC improvements, and a number of language features and compiler optimizations. My VS 2010 and .NET 4 Blog Series I’ve been cranking away on a blog series the last few months that highlights many of the new VS 2010 and .NET 4 improvements.  The good news is that I have about 20 in-depth posts already written.  The bad news (for me) is that I have about 200 more to go until I’m done!  I’m going to try and keep adding a few more each week over the next few months to discuss the new improvements and how best to take advantage of them. Below is a list of the already written ones that you can check out today: Clean Web.Config Files Starter Project Templates Multi-targeting Multiple Monitor Support New Code Focused Web Profile Option HTML / ASP.NET / JavaScript Code Snippets Auto-Start ASP.NET Applications URL Routing with ASP.NET 4 Web Forms Searching and Navigating Code in VS 2010 VS 2010 Code Intellisense Improvements WPF 4 Add Reference Dialog Improvements SEO Improvements with ASP.NET 4 Output Cache Extensibility with ASP.NET 4 Built-in Charting Controls for ASP.NET and Windows Forms Cleaner HTML Markup with ASP.NET 4 - Client IDs Optional Parameters and Named Arguments in C# 4 - and a cool scenarios with ASP.NET MVC 2 Automatic Properties, Collection Initializers and Implicit Line Continuation Support with VB 2010 New <%: %> Syntax for HTML Encoding Output using ASP.NET 4 JavaScript Intellisense Improvements with VS 2010 Stay tuned to my blog as I post more.  Also check out this page which links to a bunch of great articles and videos done by others. VS 2010 Installation Notes If you have installed a previous version of VS 2010 on your machine (either the beta or the RC) you must first uninstall it before installing the final VS 2010 release.  I also recommend uninstalling .NET 4 betas (including both the client and full .NET 4 installs) as well as the other installs that come with VS 2010 (e.g. ASP.NET MVC 2 preview builds, etc).  The uninstalls of the betas/RCs will clean up all the old state on your machine – after which you can install the final VS 2010 version and should have everything just work (this is what I’ve done on all of my machines and I haven’t had any problems). The VS 2010 and .NET 4 installs add a bunch of new managed assemblies to your machine.  Some of these will be “NGEN’d” to native code during the actual install process (making them run fast).  To avoid adding too much time to VS setup, though, we don’t NGEN all assemblies immediately – and instead will NGEN the rest in the background when your machine is idle.  Until it finishes NGENing the assemblies they will be JIT’d to native code the first time they are used in a process – which for large assemblies can sometimes cause a slight performance hit. If you run into this you can manually force all assemblies to be NGEN’d to native code immediately (and not just wait till the machine is idle) by launching the Visual Studio command line prompt from the Windows Start Menu (Microsoft Visual Studio 2010->Visual Studio Tools->Visual Studio Command Prompt).  Within the command prompt type “Ngen executequeueditems” – this will cause everything to be NGEN’d immediately. How to Buy Visual Studio 2010 You can can download and use the free Visual Studio express editions of Visual Web Developer 2010, Visual Basic 2010, Visual C# 2010 and Visual C++.  These express editions are available completely for free (and never time out). You can buy a new copy of VS 2010 Professional that includes a 1 year subscription to MSDN Essentials for $799.  MSDN Essentials includes a developer license of Windows 7 Ultimate, Windows Server 2008 R2 Enterprise, SQL Server 2008 DataCenter R2, and 20 hours of Azure hosting time.  Subscribers also have access to MSDN’s Online Concierge, and Priority Support in MSDN Forums. Upgrade prices from previous releases of Visual Studio are also available.  Existing Visual Studio 2005/2008 Standard customers can upgrade to Visual Studio 2010 Professional for a special $299 retail price until October.  You can take advantage of this VS Standard->Professional upgrade promotion here. Web developers who build applications for others, and who are either independent developers or who work for companies with less than 10 employees, can also optionally take advantage of the Microsoft WebSiteSpark program.  This program gives you three copies of Visual Studio 2010 Professional, 1 copy of Expression Studio, and 4 CPU licenses of both Windows 2008 R2 Web Server and SQL 2008 Web Edition that you can use to both develop and deploy applications with at no cost for 3 years.  At the end of the 3 years there is no obligation to buy anything.  You can sign-up for WebSiteSpark today in under 5 minutes – and immediately have access to the products to download. Summary Today’s release is a big one – and has a bunch of improvements for pretty much every developer.  Thank you everyone who provided feedback, suggestions and reported bugs throughout the development process – we couldn’t have delivered it without you.  Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • SQL SERVER – Database Dynamic Caching by Automatic SQL Server Performance Acceleration

    - by pinaldave
    My second look at SafePeak’s new version (2.1) revealed to me few additional interesting features. For those of you who hadn’t read my previous reviews SafePeak and not familiar with it, here is a quick brief: SafePeak is in business of accelerating performance of SQL Server applications, as well as their scalability, without making code changes to the applications or to the databases. SafePeak performs database dynamic caching, by caching in memory result sets of queries and stored procedures while keeping all those cache correct and up to date. Cached queries are retrieved from the SafePeak RAM in microsecond speed and not send to the SQL Server. The application gets much faster results (100-500 micro seconds), the load on the SQL Server is reduced (less CPU and IO) and the application or the infrastructure gets better scalability. SafePeak solution is hosted either within your cloud servers, hosted servers or your enterprise servers, as part of the application architecture. Connection of the application is done via change of connection strings or adding reroute line in the c:\windows\system32\drivers\etc\hosts file on all application servers. For those who would like to learn more on SafePeak architecture and how it works, I suggest to read this vendor’s webpage: SafePeak Architecture. More interesting new features in SafePeak 2.1 In my previous review of SafePeak new I covered the first 4 things I noticed in the new SafePeak (check out my article “SQLAuthority News – SafePeak Releases a Major Update: SafePeak version 2.1 for SQL Server Performance Acceleration”): Cache setup and fine-tuning – a critical part for getting good caching results Database templates Choosing which database to cache Monitoring and analysis options by SafePeak Since then I had a chance to play with SafePeak some more and here is what I found. 5. Analysis of SQL Performance (present and history): In SafePeak v.2.1 the tools for understanding of performance became more comprehensive. Every 15 minutes SafePeak creates and updates various performance statistics. Each query (or a procedure execute) that arrives to SafePeak gets a SQL pattern, and after it is used again there are statistics for such pattern. An important part of this product is that it understands the dependencies of every pattern (list of tables, views, user defined functions and procs). From this understanding SafePeak creates important analysis information on performance of every object: response time from the database, response time from SafePeak cache, average response time, percent of traffic and break down of behavior. One of the interesting things this behavior column shows is how often the object is actually pdated. The break down analysis allows knowing the above information for: queries and procedures, tables, views, databases and even instances level. The data is show now on all arriving queries, both read queries (that can be cached), but also any types of updates like DMLs, DDLs, DCLs, and even session settings queries. The stats are being updated every 15 minutes and SafePeak dashboard allows going back in time and investigating what happened within any time frame. 6. Logon trigger, for making sure nothing corrupts SafePeak cache data If you have an application with many parts, many servers many possible locations that can actually update the database, or the SQL Server is accessible to many DBAs or software engineers, each can access some database directly and do some changes without going thru SafePeak – this can create a potential corruption of the data stored in SafePeak cache. To make sure SafePeak cache is correct it needs to get all updates to arrive to SafePeak, and if a DBA will access the database directly and do some changes, for example, then SafePeak will simply not know about it and will not clean SafePeak cache. In the new version, SafePeak brought a new feature called “Logon Trigger” to solve the above challenge. By special click of a button SafePeak can deploy a special server logon trigger (with a CLR object) on your SQL Server that actually monitors all connections and informs SafePeak on any connection that is coming not from SafePeak. In SafePeak dashboard there is an interface that allows to control which logins can be ignored based on login names and IPs, while the rest will invoke cache cleanup of SafePeak and actually locks SafePeak cache until this connection will not be closed. Important to note, that this does not interrupt any logins, only informs SafePeak on such connection. On the Dashboard screen in SafePeak you will be able to see those connections and then decide what to do with them. Configuration of this feature in SafePeak dashboard can be done here: Settings -> SQL instances management -> click on instance -> Logon Trigger tab. Other features: 7. User management ability to grant permissions to someone without changing its configuration and only use SafePeak as performance analysis tool. 8. Better reports for analysis of performance using 15 minute resolution charts. 9. Caching of client cursors 10. Support for IPv6 Summary SafePeak is a great SQL Server performance acceleration solution for users who want immediate results for sites with performance, scalability and peak spikes challenges. Especially if your apps are packaged or 3rd party, since no code changes are done. SafePeak can significantly increase response times, by reducing network roundtrip to the database, decreasing CPU resource usage, eliminating I/O and storage access. SafePeak team provides a free fully functional trial www.safepeak.com/download and actually provides a one-on-one assistance during such trial. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, Pinal Dave, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Utility, T SQL, Technology

    Read the article

< Previous Page | 283 284 285 286 287 288 289 290 291 292 293 294  | Next Page >