Search Results

Search found 9730 results on 390 pages for 'restart programs'.

Page 289/390 | < Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >

• Xubuntu 13.10 64bit - Slow and buggy "log out" process?

  - by MrKatSwordfish

  I'm a Windows convert who has done only a little bit of dabbling in Ubuntu in the past (back in Dapper Drake a few years back). A lot has changes since then, and I've been yearning to jump back into linux again! So, having just bought a new SSD, I felt that this would be as good of a time as any to set up a dual-boot system again. I've messed around with Ubuntu 13.10 a bit, and while Unity has its issues, I think that it still needs some time to develop. I looked into XFCE and liked it a lot, so I went with Xubuntu. I've installed Xubuntu, and for the most part it's running smoothly and it a pleasure to work with. The customization is great and the minimalistic look and feel is really nice! But here's my problem, whenever I select the "Log Out" option from either the application menu, or the user profiles menu, my PC comes to a crawl, and the dialog box with all the options (shut down, restart, log out, etc.) takes maybe a minute or more to appear. I click the log out button, my PC is brought to a snail's pace, and I have to wait for what seems like an eternity for the logout options to appear! If i try to open something else (even a terminal window) while it's loading the logout options, that other program won't finish loading until the logout screen finally appears. Keep in mind, this is a pretty much vanilla install of Xubuntu 13.10 64bit, on a PC with an intel i7, an SSD, 6gb DDR3 RAM, and a new AMD 7770 gpu (drivers haven't been installed yet, though). Everything else runs fast, most applications open near-instantly! It must be an issue with how the logout options screen initializes or something, but I'm not sure exactly how I can fix it.. Edit - Extra Info: This problem is very consistent when using the "Log Out" buttons in Xubuntu. However, I've found that I'm able to reboot and shutdown much more quickly by going through the "Switch User" screen, and using the reboot or shutdown buttons on that screen. I'm nearly certain that it has something to do with the little Log Out options screen that appears when I select Log Out from the menu, and not the actual process of shutting down.. So what should I do? I really like XFCE so far, and I've never tried a non-ubuntu based distro before, but should I just switch to something else? Is there any known fix for this issue? Are there any work-arounds for logging out/shutting down/rebooting via the terminal so that I can avoid this irritating bug? Is there any that I can monitor the progress of the log out via terminal, allowing me to see which parts are causing the slow-down? What is the best way to report this bug to someone?

  Read the article

• Reverse-engineer SharePoint fields, content types and list instance—Part2

  - by ybbest

  Reverse-engineer SharePoint fields, content types and list instance—Part1 Reverse-engineer SharePoint fields, content types and list instance—Part2 In the part1 of this series, I demonstrated how to use VS2010 to Reverse-engineer SharePoint fields, content types and list instances. In the part 2 of this series, I will demonstrate how to do the same using CKS:Dev. CKS:Dev extends the Visual Studio 2010 SharePoint project system with advanced templates and tools. Using these extensions you will be able to find relevant information from your SharePoint environments without leaving Visual Studio. You will have greater productivity while developing SharePoint components and you will have greater deployment capabilities on your local SharePoint installation. You can download the complete solution here. 1. First, download and install appropriate CKS:Dev from CodePlex. If you are using SharePoint Foundation 2010 then download and install the SharePoint Foundation 2010 version If you are using SharePoint Server 2010 then download and install the SharePoint Server 2010 version 2. After installation, you need to restart your visual studio and create empty SharePoint. 3. Go to Viewà Server Explorer 4. Add SharePoint web application connection to the server explorer. 5. After add the connection, you can browse to see the contents for the Web Application. 6. Go to Site Columns à YBBEST (Custom Group of you own choice) and right-click the YBBEST Folder and Click Import Site Columns. 7. Go to ContentTypesà YBBEST (Custom Group of you own choice) and right-click the YBBEST Folder and Click Import Content Types. 8. After the import completes, you can find the fields and contentTypes in the SharePoint project below. Of course you need to do some modification to your current project to make it work. 9. Next, create list instances using list instance item template in Visual Studio 10. Finally, create lookup columns using the feature receivers and the final project will look like this. You can download the complete solution here.

  Read the article

• Microsoft, please help me diagnose TFS Administration permission issues!

  - by Martin Hinshelwood

  I recently had a fun time trying to debug a permission issue I ran into using TFS 2010’s TfsConfig. Update 5th March 2010 – In its style of true excellence my company has added rant to its “Suggestions for Better TFS”. <rant> I was trying to run the TfsConfig tool and I kept getting the message: “TF55038: You don't have sufficient privileges to run this tool. Contact your Team Foundation system administrator." This message made me think that it was something to do with the Install permissions as it is always recommended to use a single account to do every install of TFS. I did not install the original TFS on our network and my account was not used to do the TFS2010 install. But I did do the upgrade from 2010 beta 2 to 2010 RC with my current account. So I proceeded to do some checking: Am I in the administrators group on the server? Figure: Yes, I am in the administrators group on the server Am I in the Administration Console users list? Figure: Yes, I am in the Administration Console users list Have I reapplied the permissions in the Administration Console users list ticking all the options? Figure: Make sure you check all of the boxed if you want to have all the admin options Figure: Yes, I have made sure that all my options are correct. Am I in the Team Foundation administrators group? Figure: Yes, I am in the Team Foundation Administrators group Is my account explicitly SysAdmin on the Database server? Figure: Yes, I do have explicit SysAdmin on the database Can you guess what the problem was? The command line window was not running as the administrator! As with most other applications there should be an explicit error message that states: "You are not currently running in administrator mode; please restart the command line with elevated privileges!" This would have saved me 30 minutes, although I agree that I should change my name to Muppet and just be done with it. </rant>   Technorati Tags: Visual Studio ALM,Administration,Team Foundation Server Admin Console,TFS Admin Console

  Read the article

• Disable Opera Thumbnail Previews on Windows 7 Taskbar

  - by Asian Angel

  If you are one of the people who does not care for the Taskbar Thumbnail Previews in Windows 7 then we have a quick and easy way for you to turn them off in Opera Browser. Before Here is our Opera Browser with four tabs full of HTG Network goodness… Hovering the mouse over the Taskbar Icon gives a nice preview of each tabs content. Looking closer you can see the fanned edge on the Taskbar Icon indicating that there are multiple tabs open. This is all good but what if you just want something simpler? Disabling the Previews If you want to disable the Taskbar Thumbnail Previews in Opera you will need to type opera:config in the Address Bar and press Enter. Once you have done that, you will see a condensed listing for all of Opera’s preferences. There is one Preference Category that we need to look for…User Prefs. Note: While a Quick Find Search could be conducted for the entry that needs to be modified, we have chosen to show the full method here. After scrolling down and finding the User Prefs category you will need to expand the section. Notice the size of the scrollbar in comparison with the screenshot above…there is quite a lot that you can look at and finesse in Opera if desired. Scroll down until you find the Use Windows 7 Taskbar Thumbnails entry. Uncheck the box but do not close the opera:config Tab yet…or your changes will not take effect. Scroll down once more until you reach the end of the User Prefs category and click Save. With this particular modification you will need to restart Opera after clicking OK. After restarting Opera the Taskbar Icon and Taskbar Thumbnail Preview will revert to the minimal Windows 7 default as shown here. You can see Opera’s Tab Bar in the thumbnail and the Taskbar Icon no longer has a “fanned edge”. Conclusion If you want to disable Opera’s Taskbar Thumbnail Previews on your Windows 7 system, then this quick modification will help get it sorted out in just a few moments. Similar Articles Productive Geek Tips Disable IE 8 Thumbnail Previews on Windows 7 TaskbarIncrease the size of Taskbar Preview Thumbnails in Windows 7Vista Style Popup Previews for Firefox TabsEnable Thumbnail Previews for Firefox in Windows 7 TaskbarWorkaround for Vista Taskbar Thumbnail Previews Not Showing Correctly TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides

  Read the article

• Imperative Programming v/s Declarative Programming v/s Functional Programming

  - by kaleidoscope

  Imperative Programming :: Imperative programming is a programming paradigm that describes computation in terms of statements that change a program state. In much the same way as the imperative mood in natural languages expresses commands to take action, imperative programs define sequences of commands for the computer to perform. The focus is on what steps the computer should take rather than what the computer will do (ex. C, C++, Java). Declarative Programming :: Declarative programming is a programming paradigm that expresses the logic of a computation without describing its control flow. It attempts to minimize or eliminate side effects by describing what the program should accomplish, rather than describing how to go about accomplishing it. The focus is on what the computer should do rather than how it should do it (ex. SQL). A  C# example of declarative v/s. imperative programming is LINQ. With imperative programming, you tell the compiler what you want to happen, step by step. For example, let's start with this collection, and choose the odd numbers: List<int> collection = new List<int> { 1, 2, 3, 4, 5 }; With imperative programming, we'd step through this, and decide what we want: List<int> results = new List<int>(); foreach(var num in collection) {     if (num % 2 != 0)           results.Add(num); } Here’s what we are doing: *Create a result collection *Step through each number in the collection *Check the number, if it's odd, add it to the results With declarative programming, on the other hand, we write the code that describes what you want, but not necessarily how to get it var results = collection.Where( num => num % 2 != 0); Here, we're saying "Give us everything where it's odd", not "Step through the collection. Check this item, if it's odd, add it to a result collection." Functional Programming :: Functional programming is a programming paradigm that treats computation as the evaluation of mathematical functions and avoids state and mutable data. It emphasizes the application of functions.Functional programming has its roots in the lambda calculus. It is a subset of declarative languages that has heavy focus on recursion. Functional programming can be a mind-bender, which is one reason why Lisp, Scheme, and Haskell have never really surpassed C, C++, Java and COBOL in commercial popularity. But there are benefits to the functional way. For one, if you can get the logic correct, functional programming requires orders of magnitude less code than imperative programming. That means fewer points of failure, less code to test, and a more productive (and, many would say, happier) programming life. As systems get bigger, this has become more and more important. To know more : http://stackoverflow.com/questions/602444/what-is-functional-declarative-and-imperative-programming http://msdn.microsoft.com/en-us/library/bb669144.aspx http://en.wikipedia.org/wiki/Imperative_programming   Technorati Tags: Ranjit,Imperative Programming,Declarative programming,Functional Programming

  Read the article

• Mark Messages As Read in the Outlook 2010 Reading Pane

  - by Matthew Guay

  Do you ever feel annoyed that Outlook 2010 doesn’t mark messages as Read as soon as you click and view them in the Reading Pane?  Here we show you how to make Outlook mark them as read as soon as they’re opened. Mark as Read By default, Outlook will not mark a message as read until you select another message.  This can be annoying, because if you read a message and immediately click Delete, it will show up as an unread message in our Deleted Items folder. Let’s change this to make Outlook mark messages as read as soon as we view them in the Reading Pane.  Open Outlook and click File to open Backstage View, and select Options. In Options select Mail on the left menu, and under Outlook panes click on the Reading Pane button. Check the box Mark items as read when viewed in the Reading Pane to make Outlook mark your messages as read when you view them in the Reading Pane.  By default, Outlook will only mark a message read after you’ve been reading it for 5 seconds, though you can change this.  We set it to 0 seconds so our messages would be marked as read as soon as we select them. Click OK in both dialogs, and now your messages will be marked as read as soon as you select them in the reading pane, or soon after, depending on your settings. Conclusion Outlook 2010 is a great email client, but like most programs it has its quirks.  This quick tip can help you get rid of one of Outlook’s annoying features, and make it work like you want it to. And, if you’re still using Outlook 2007, check out our article on how to Mark Messages as Read When Viewed in Outlook 2007. Similar Articles Productive Geek Tips Make Outlook 2007 Mark Items as Read When Viewed in Reading PaneMake Mail.app’s Reading Pane More Like OutlookIntegrate Twitter With Microsoft OutlookSort Your Emails by Conversation in Outlook 2010Find Emails With Attachments with Outlook 2007’s Instant Search TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 VMware Workstation 7 OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides Sculptris 1.0, 3D Drawing app

  Read the article

• Lost all privileges since upgrading to 13.10

  - by Chris Poole

  Since upgrading to 13.10, I no longer have the 'privileges' to do the following things: Mount USB/CDROM drives Run software centre or software updater Press the GUI shut down or restart buttons Unlock my account in the 'settings - user accounts' section (padlock is greyed out) Also, when logging on as a guest user I get error messages relating to Compiz crashing with SIGSEGV and it hangs on a blank wallpaper screen. However, I still am able to use sudo in the terminal. Output of 'groups' is jenchris adm dialout cdrom sudo audio video plugdev lpadmin admin pulse pulse-access sambashare sudo usermod -U username doesn't have any effect Output of sudo dpkg-reconfigure -phigh -a acpid stop/waiting acpid start/running, process 30454 * Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd [ OK ] * Reloading AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd [ OK ] apport stop/waiting apport start/running gpg: key 437D05B5: "Ubuntu Archive Automatic Signing Key <[email protected]>" not changed gpg: key FBB75451: "Ubuntu CD Image Automatic Signing Key <[email protected]>" not changed gpg: key C0B21F32: "Ubuntu Archive Automatic Signing Key (2012) <[email protected]>" not changed gpg: key EFE21092: "Ubuntu CD Image Automatic Signing Key (2012) <[email protected]>" not changed gpg: Total number processed: 4 gpg: unchanged: 4 atd stop/waiting atd start/running, process 1388 avahi-daemon stop/waiting avahi-daemon start/running, process 1521 Rebuilding /usr/share/applications/bamf-2.index... update-alternatives: using /usr/share/man/man7/bash-builtins.7.gz to provide /usr/share/man/man7/builtins.7.gz (builtins.7.gz) in auto mode update-binfmts: warning: current package is openjdk-7, but binary format already installed by openjdk-6 binfmt-support stop/waiting bluetooth stop/waiting bluetooth start/running, process 4255 update-initramfs: deferring update (trigger activated) /var/lib/dpkg/info/compiz.config: 1: /var/lib/dpkg/info/compiz.config: [general]: not found /var/lib/dpkg/info/compiz.config: 2: /var/lib/dpkg/info/compiz.config: backend: not found /var/lib/dpkg/info/compiz.config: 3: /var/lib/dpkg/info/compiz.config: plugin_list_autosort: not found /var/lib/dpkg/info/compiz.config: 5: /var/lib/dpkg/info/compiz.config: [gnome_session]: not found /var/lib/dpkg/info/compiz.config: 6: /var/lib/dpkg/info/compiz.config: backend: not found /var/lib/dpkg/info/compiz.config: 7: /var/lib/dpkg/info/compiz.config: integration: not found /var/lib/dpkg/info/compiz.config: 8: /var/lib/dpkg/info/compiz.config: plugin_list_autosort: not found /var/lib/dpkg/info/compiz.config: 9: /var/lib/dpkg/info/compiz.config: profile: not found /var/lib/dpkg/info/compiz.config: 11: /var/lib/dpkg/info/compiz.config: [general_ubuntu]: not found /var/lib/dpkg/info/compiz.config: 12: /var/lib/dpkg/info/compiz.config: backend: not found /var/lib/dpkg/info/compiz.config: 13: /var/lib/dpkg/info/compiz.config: integration: not found /var/lib/dpkg/info/compiz.config: 14: /var/lib/dpkg/info/compiz.config: plugin_list_autosort: not found /var/lib/dpkg/info/compiz.config: 15: /var/lib/dpkg/info/compiz.config: profile: not found

  Read the article

• What Every Developer Should Know About MSI Components

  - by Alois Kraus

  Hopefully nothing. But if you have to do more than simple XCopy deployment and you need to support updates, upgrades and perhaps side by side scenarios there is no way around MSI. You can create Msi files with a Visual Studio Setup project which is severely limited or you can use the Windows Installer Toolset. I cannot talk about WIX with my German colleagues because WIX has a very special meaning. It is funny to always use the long name when I talk about deployment possibilities. Alternatively you can buy commercial tools which help you to author Msi files but I am not sure how good they are. Given enough pain with existing solutions you can also learn the MSI Apis and create your own packaging solution. If I were you I would use either a commercial visual tool when you do easy deployments or use the free Windows Installer Toolset. Once you know the WIX schema you can create well formed wix xml files easily with any editor. Then you can “compile” from the wxs files your Msi package. Recently I had the “pleasure” to get my hands dirty with C++ (again) and the MSI technology. Installation is a complex topic but after several month of digging into arcane MSI issues I can safely say that there should exist an easier way to install and update files as today. I am not alone with this statement as John Robbins (creator of the cool tool Paraffin) states: “.. It's a brittle and scary API in Windows …”. To help other people struggling with installation issues I present you the advice I (and others) found useful and what will happen if you ignore this advice. What is a MSI file? A MSI file is basically a database with tables which reference each other to control how your un/installation should work. The basic idea is that you declare via these tables what you want to install and MSI controls the how to get your stuff onto or off your machine. Your “stuff” consists usually of files, registry keys, shortcuts and environment variables. Therefore the most important tables are File, Registry, Environment and Shortcut table which define what will be un/installed. The key to master MSI is that every resource (file, registry key ,…) is associated with a MSI component. The actual payload consists of compressed files in the CAB format which can either be embedded into the MSI file or reside beside the MSI file or in a subdirectory below it. To examine MSI files you need Orca a free MSI editor provided by MS. There is also another free editor called Super Orca which does support diffs between MSI and it does not lock the MSI files. But since Orca comes with a shell extension I tend to use only Orca because it is so easy to right click on a MSI file and open it with this tool. How Do I Install It? Double click it. This does work for fresh installations as well as major upgrades. Updates need to be installed via the command line via msiexec /i <msi> REINSTALL=ALL REINSTALLMODE=vomus   This tells the installer to reinstall all already installed features (new features will NOT be installed). The reinstallmode letters do force an overwrite of the old cached package in the %WINDIR%\Installer folder. All files, shortcuts and registry keys are redeployed if they are missing or need to be replaced with a newer version. When things did go really wrong and you want to overwrite everything unconditionally use REINSTALLMODE=vamus. How To Enable MSI Logs? You can download a MSI from Microsoft which installs some registry keys to enable full MSI logging. The log files can be found in your %TEMP% folder and are called MSIxxxx.log. Alternatively you can add to your msiexec command line the option msiexec …. /l*vx <LogFileName> Personally I find it rather strange that * does not mean full logging. To really get all logs I need to add v and x which is documented in the msiexec help but I still find this behavior unintuitive. What are MSI components? The whole MSI logic is bound to the concept of MSI components. Nearly every msi table has a Component column which binds an installable resource to a component. Below are the screenshots of the FeatureComponents and Component table of an example MSI. The Feature table defines basically the feature hierarchy.  To find out what belongs to a feature you need to look at the FeatureComponents table where for each feature the components are listed which will be installed when a feature is installed. The MSI components are defined in the  Component table. This table has as first column the component name and as second column the component id which is a GUID. All resources you want to install belong to a MSI component. Therefore nearly all MSI tables have a Component_ column which contains the component name. If you look e.g. a the File table you see that every file belongs to a component which is true for all other tables which install resources. The component table is the glue between all other tables which contain the resources you want to install. So far so easy. Why is MSI then so complex? Most MSI problems arise from the fact that you did violate a MSI component rule in one or the other way. When you install a feature the reference count for all components belonging to this feature will increase by one. If your component is installed by more than one feature it will get a higher refcount. When you uninstall a feature its refcount will drop by one. Interesting things happen if the component reference count reaches zero: Then all associated resources will be deleted. That looks like a reasonable thing and it is. What it makes complex are the strange component rules you have to follow. Below are some important component rules from the Tao of the Windows Installer … Rule 16: Follow Component Rules Components are a very important part of the Installer technology. They are the means whereby the Installer manages the resources that make up your application. The SDK provides the following guidelines for creating components in your package: Never create two components that install a resource under the same name and target location. If a resource must be duplicated in multiple components, change its name or target location in each component. This rule should be applied across applications, products, product versions, and companies. Two components must not have the same key path file. This is a consequence of the previous rule. The key path value points to a particular file or folder belonging to the component that the installer uses to detect the component. If two components had the same key path file, the installer would be unable to distinguish which component is installed. Two components however may share a key path folder. Do not create a version of a component that is incompatible with all previous versions of the component. This rule should be applied across applications, products, product versions, and companies. Do not create components containing resources that will need to be installed into more than one directory on the user’s system. The installer installs all of the resources in a component into the same directory. It is not possible to install some resources into subdirectories. Do not include more than one COM server per component. If a component contains a COM server, this must be the key path for the component. Do not specify more than one file per component as a target for the Start menu or a Desktop shortcut. … And these rules do not even talk about component ids, update packages and upgrades which you need to understand as well. Lets suppose you install two MSIs (MSI1 and MSI2) which have the same ComponentId but different component names. Both do install the same file. What will happen when you uninstall MSI2?   Hm the file should stay there. But the component names are different. Yes and yes. But MSI uses not use the component name as key for the refcount. Instead the ComponentId column of the Component table which contains a GUID is used as identifier under which the refcount is stored. The components Comp1 and Comp2 are identical from the MSI perspective. After the installation of both MSIs the Component with the Id {100000….} has a refcount of two. After uninstallation of one MSI there is still a refcount of one which drops to zero just as expected when we uninstall the last msi. Then the file which was the same for both MSIs is deleted. You should remember that MSI keeps a refcount across MSIs for components with the same component id. MSI does manage components not the resources you did install. The resources associated with a component are then and only then deleted when the refcount of the component reaches zero.   The dependencies between features, components and resources can be described as relations. m,k are numbers >= 1, n can be 0. Inside a MSI the following relations are valid Feature    1  –> n Components Component    1 –> m Features Component      1  –>  k Resources These relations express that one feature can install several components and features can share components between them. Every (meaningful) component will install at least one resource which means that its name (primary key to stay in database speak) does occur in some other table in the Component column as value which installs some resource. Lets make it clear with an example. We want to install with the feature MainFeature some files a registry key and a shortcut. We can then create components Comp1..3 which are referenced by the resources defined in the corresponding tables.   Feature Component Registry File Shortcuts MainFeature Comp1 RegistryKey1     MainFeature Comp2   File.txt   MainFeature Comp3   File2.txt Shortcut to File2.txt   It is illegal that the same resource is part of more than one component since this would break the refcount mechanism. Lets illustrate this:            Feature ComponentId Resource Reference Count Feature1 {1000-…} File1.txt 1 Feature2 {2000-….} File1.txt 1 The installation part works well but what happens when you uninstall Feature2? Component {20000…} gets a refcount of zero where MSI deletes all resources belonging to this component. In this case File1.txt will be deleted. But Feature1 still has another component {10000…} with a refcount of one which means that the file was deleted too early. You just have ruined your installation. To fix it you then need to click on the Repair button under Add/Remove Programs to let MSI reinstall any missing registry keys, files or shortcuts. The vigilant reader might has noticed that there is more in the Component table. Beside its name and GUID it has also an installation directory, attributes and a KeyPath. The KeyPath is a reference to a file or registry key which is used to detect if the component is already installed. This becomes important when you repair or uninstall a component. To find out if the component is already installed MSI checks if the registry key or file referenced by the KeyPath property does exist. When it does not exist it assumes that it was either already uninstalled (can lead to problems during uninstall) or that it is already installed and all is fine. Why is this detail so important? Lets put all files into one component. The KeyPath should be then one of the files of your component to check if it was installed or not. When your installation becomes corrupt because a file was deleted you cannot repair it with the Repair button under Add/Remove Programs because MSI checks the component integrity via the Resource referenced by its KeyPath. As long as you did not delete the KeyPath file MSI thinks all resources with your component are installed and never executes any repair action. You get even more trouble when you try to remove files during an upgrade (you cannot remove files during an update) from your super component which contains all files. The only way out and therefore best practice is to assign for every resource you want to install an extra component. This ensures painless updatability and repairs and you have much less effort to remove specific files during an upgrade. In effect you get this best practice relation Feature 1  –> n Components Component   1  –>  1 Resources MSI Component Rules Rule 1 – One component per resource Every resource you want to install (file, registry key, value, environment value, shortcut, directory, …) must get its own component which does never change between versions as long as the install location is the same. Penalty If you add more than one resources to a component you will break the repair capability of MSI because the KeyPath is used to check if the component needs repair. MSI ComponentId Files MSI 1.0 {1000} File1-5 MSI 2.0 {2000} File2-5 You want to remove File1 in version 2.0 of your MSI. Since you want to keep the other files you create a new component and add them there. MSI will delete all files if the component refcount of {1000} drops to zero. The files you want to keep are added to the new component {2000}. Ok that does work if your upgrade does uninstall the old MSI first. This will cause the refcount of all previously installed components to reach zero which means that all files present in version 1.0 are deleted. But there is a faster way to perform your upgrade by first installing your new MSI and then remove the old one.  If you choose this upgrade path then you will loose File1-5 after your upgrade and not only File1 as intended by your new component design.   Rule 2 – Only add, never remove resources from a component If you did follow rule 1 you will not need Rule 2. You can add in a patch more resources to one component. That is ok. But you can never remove anything from it. There are tricky ways around that but I do not want to encourage bad component design. Penalty Lets assume you have 2 MSI files which install under the same component one file   MSI1 MSI2 {1000} - ComponentId {1000} – ComponentId File1.txt File2.txt   When you install and uninstall both MSIs you will end up with an installation where either File1 or File2 will be left. Why? It seems that MSI does not store the resources associated with each component in its internal database. Instead Windows will simply query the MSI that is currently uninstalled for all resources belonging to this component. Since it will find only one file and not two it will only uninstall one file. That is the main reason why you never can remove resources from a component!   Rule 3 Never Remove A Component From an Update MSI. This is the same as if you change the GUID of a component by accident for your new update package. The resulting update package will not contain all components from the previously installed package. Penalty When you remove a component from a feature MSI will set the feature state during update to Advertised and log a warning message into its log file when you did enable MSI logging. SELMGR: ComponentId '{2DCEA1BA-3E27-E222-484C-D0D66AEA4F62}' is registered to feature 'xxxxxxx, but is not present in the Component table.  Removal of components from a feature is not supported! MSI (c) (24:44) [07:53:13:436]: SELMGR: Removal of a component from a feature is not supported Advertised means that MSI treats all components of this feature as not installed. As a consequence during uninstall nothing will be removed since it is not installed! This is not only bad because uninstall does no longer work but this feature will also not get the required patches. All other features which have followed component versioning rules for update packages will be updated but the one faulty feature will not. This results in very hard to find bugs why an update was only partially successful. Things got better with Windows Installer 4.5 but you cannot rely on that nobody will use an older installer. It is a good idea to add to your update msiexec call MSIENFORCEUPGRADECOMPONENTRULES=1 which will abort the installation if you did violate this rule.

  Read the article

• How to Quickly Cut a Clip From a Video File with Avidemux

  - by Trevor Bekolay

  Whether you’re cutting out the boring parts of your vacation video or getting a hilarious scene for an animated GIF, Avidemux provides a quick and easy way to cut clips from any video file. It’s overkill to use a full-featured video editing program if you just want to cut a few clips from a video file. Even programs that are designed to be small can have confusing interfaces when dealing with video. We’ve found that a great free program, Avidemux, makes the job of cutting clips extremely simple. Note: While the screenshots in this guide are taken from the Windows version, Avidemux runs on all of the major platforms – Windows, Mac OS X and Linux (GTK). Image by Keith Williamson. Cutting Clips from a Video File Open up Avidemux, and load the video file that you want to work with. If you get a prompt like this one: we recommend clicking Yes to use the safer mode. Find the portion of the video that you’d like to isolate. Get as close as you can to the start of the clip you want to cut. Once you find the start of your clip, look at the “Frame Type” of the current frame. You want it to read I; if it isn’t frame type I, then use the single left and right arrow buttons to go forward or backward one frame until you find an appropriate I frame. Once you’ve found the right starting frame, click the button with the A over a red bar. This will set the start of the clip. Advance to where you want your clip to end. Click on the button with a B when you’ve found the appropriate frame. This frame can be of any type. You can now save the clip, either by going to File –> Save –> Save Video… or by pressing Ctrl+S. Give the file a name, and Avidemux will prepare your clip. And that’s it! You should now have a movie file that contains only the portion of the original file that you want. Download Avidemux free for all platforms Latest Features How-To Geek ETC How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop How Do You Block Annoying Text Message (SMS) Spam? Battlestar Galactica – Caprica Map of the 12 Colonies (Wallpaper Also Available) View Enlarged Versions of Thumbnail Images with Thumbnail Zoom for Firefox IntoNow Identifies Any TV Show by Sound Walk Score Calculates a Neighborhood’s Pedestrian Friendliness Factor Fantasy World at Twilight Wallpaper Hack a Wireless Doorbell into a Snail Mail Indicator

  Read the article

• Web.Config is Cached

  - by SGWellens

  There was a question from a student over on the Asp.Net forums about improving site performance. The concern was that every time an app setting was read from the Web.Config file, the disk would be accessed. With many app settings and many users, it was believed performance would suffer. Their intent was to create a class to hold all the settings, instantiate it and fill it from the Web.Config file on startup. Then, all the settings would be in RAM. I knew this was not correct and didn't want to just say so without any corroboration, so I did some searching. Surprisingly, this is a common misconception. I found other code postings that cached the app settings from Web.Config. Many people even thanked the posters for the code. In a later post, the student said their text book recommended caching the Web.Config file. OK, here's the deal. The Web.Config file is already cached. You do not need to re-cache it. From this article http://msdn.microsoft.com/en-us/library/aa478432.aspx It is important to realize that the entire <appSettings> section is read, parsed, and cached the first time we retrieve a setting value. From that point forward, all requests for setting values come from an in-memory cache, so access is quite fast and doesn't incur any subsequent overhead for accessing the file or parsing the XML. The reason the misconception is prevalent may be because it's hard to search for Web.Config and cache without getting a lot of hits on how to setup caching in the Web.Config file. So here's a string for search engines to index on: "Is the Web.Config file Cached?" A follow up question was, are the connection strings cached? Yes. http://msdn.microsoft.com/en-us/library/ms178683.aspx At run time, ASP.NET uses the Web.Config files to hierarchically compute a unique collection of configuration settings for each incoming URL request. These settings are calculated only once and then cached on the server. And, as everyone should know, if you modify the Web.Config file, the web application will restart. I hope this helps people to NOT write code! Steve WellensCodeProject

  Read the article

• Web.Config is Cached

  - by SGWellens

  There was a question from a student over on the Asp.Net forums about improving site performance. The concern was that every time an app setting was read from the Web.Config file, the disk would be accessed. With many app settings and many users, it was believed performance would suffer. Their intent was to create a class to hold all the settings, instantiate it and fill it from the Web.Config file on startup. Then, all the settings would be in RAM. I knew this was not correct and didn't want to just say so without any corroboration, so I did some searching. Surprisingly, this is a common misconception. I found other code postings that cached the app settings from Web.Config. Many people even thanked the posters for the code. In a later post, the student said their text book recommended caching the Web.Config file. OK, here's the deal. The Web.Config file is already cached. You do not need to re-cache it. From this article http://msdn.microsoft.com/en-us/library/aa478432.aspx It is important to realize that the entire <appSettings> section is read, parsed, and cached the first time we retrieve a setting value. From that point forward, all requests for setting values come from an in-memory cache, so access is quite fast and doesn't incur any subsequent overhead for accessing the file or parsing the XML. The reason the misconception is prevalent may be because it's hard to search for Web.Config and cache without getting a lot of hits on how to setup caching in the Web.Config file. So here's a string for search engines to index on: "Is the Web.Config file Cached?" A follow up question was, are the connection strings cached? Yes. http://msdn.microsoft.com/en-us/library/ms178683.aspx At run time, ASP.NET uses the Web.Config files to hierarchically compute a unique collection of configuration settings for each incoming URL request. These settings are calculated only once and then cached on the server. And, as everyone should know, if you modify the Web.Config file, the web application will restart. I hope this helps people to NOT write code!   Steve WellensCodeProject

  Read the article

• BUILD 2013 - Microsoft Set to Unveil It&rsquo;s Reinvention

  - by D'Arcy Lussier

  Originally posted on: http://geekswithblogs.net/dlussier/archive/2013/06/24/153211.aspxSome thoughts as we head into BUILD this week… This week in San Francisco Microsoft will be hosting the BUILD conference. They’ll be talking up Windows 8.1 (Windows Blue), more Azure, some Windows Phone, XBox, Office 365… actually, they told us on the original BUILD announcement site what we’d be seeing:           While looking at this, consider a recent article from The Verge that talks about the speculation of a huge shake up at Microsoft . From the article: All Things D quotes one insider as saying they're "titanic" changes, noting they might be attached to Ballmer's legacy at the company. "It’s the first time in a long time that it feels like that there will be some major shifts, including some departures," says the alleged insider. Considering Ballmer let Sinofsky go right after the Windows 8 launch, the idea of Microsoft cutting loose some executives doesn’t seem to be big news. But the next piece of the article frames things more interestingly: Ballmer is reportedly considering a new structure that would create four separate divisions: enterprise business, hardware, applications and services, and an operating systems group. This statement got me thinking…what would this new structure look like? Below is one possibility: At a recent (this year or last year, I can’t recall which) Microsoft shareholder’s meeting, Ballmer made the statement that Microsoft is now a products and services company. At the time I don’t think I really let that statement sink in. Partially because I really liked the Microsoft of my professional youth – the one that was a software and platform company. In Canada, Microsoft has been pushing three platform areas: Lync, Azure, and SQL Server. I would expect those to change moving forward as Microsoft continues to look for Partners that will help them increase their Services revenue through solutions that incorporate/are based on Azure, Office 365, Lync, and Dynamics. I also wonder if we’re not seeing a culling of partners through changes to the Microsoft Partner Program. In addition to the changing certification requirements that align more to Microsoft’s goals (i.e. There is no desktop development based MCSD, only Windows 8 Store Apps), competencies that partners can qualify for are being merged, requirements changed, and licenses provided reduced. Ballmer warned as much at the last WPC though that they were looking for partners who were “all in” with Microsoft, and these programs seem to support that sentiment. Heading into BUILD this week, I’ll be looking to answer one question – what does it mean to be a Microsoft developer here in the 2010’s? What is the future of the Microsoft development platform? Sure, Visual Studio is still alive and well and Microsoft realizes that there’s a huge install base of .NET developers actively working on solutions. But they’ve ratcheted down the messaging around their development stack and instead focussed on promoting development for their platforms and services. Last year at BUILD with the release of Windows 8, Microsoft just breached the walls of its cocoon. After this BUILD and the organizational change announcements in July, we’ll see what Microsoft looks like fully emerged from its metamorphosis.

  Read the article

• Welcome to my geeks blog

  - by bconlon

  Hi and welcome! I'm Bazza and this is my geeks blog. I have 20 years Visual Studio mainly C++, MFC,  ATL and now, thankfully, C# and I am embarking on the new world (well new to me) of WPF, so I thought I would try and capture my successful...and not so successful...WPF experiences with the geek world. So where to start? WPF? What I know so far... From wiki..."Windows Presentation Foundation (or WPF) is a graphical subsystem for rendering user interfaces in Windows-based applications." Hmm, great but didn't MFC, ATL (my head hurt with that one), and .Net all have APIs to allow me to code against the Windows Graphical Device Interface (GDI)? "Rather than relying on the older GDI subsystem, WPF utilizes DirectX. WPF attempts to provide a consistent programming model for building applications and provides a separation between the user interface and the business logic." OK, different drawing code, same Windows and weren't we always taught to separate our UI, Business Layer and Data Access Layer? "WPF employs XAML, a derivative of XML, to define and link various UI elements. WPF applications can be deployed as standalone desktop programs, or hosted as an embedded object in a website." Cool, now we're getting somewhere. So when they say separation they really mean separation. The crux of this appears to be that you can have creative people writing the UI and making it attractive and intuitive to use, whist the geeks concentrate on writing the Business and Data Access stuff. XAML (eXtensible Application Markup Language) maps XML elements and attributes directly to Common Language Runtime (CLR) object instances, properties and events. True separation of the View and Model. WPF also provides logical separation of a control from its appearance. In a traditional Windows system, all Controls have a base class containing a Windows handle and each Control knows how to render itself. In WPF, the controls are more like those in a Web Browser using Cascading Style Sheet, they are not wrappers for standard Windows Controls. Instead, they have a default 'template' that defines a visual theme which can easily be replaced by a custom template. But it gets better. WPF concentrates heavily on Data Binding where the client can bind directly to data on the server. I think this concept was first introduced in 'Classic' Visual Basic, where you could bind a list directly to a data from an Access database, and you could do similar in ASP .Net. However, the WPF implementation is far superior than it's predecessors. There are also other technologies that I want to look at like LINQ and the Entity Framework, but that's all for now. #

  Read the article

• Accessing JMX for Oracle WebLogic 11g

  - by Anthony Shorten

  In Oracle Utilities Application Framework V4, we use the latest Oracle WebLogic release (11g). The instructions below illustrate a way of allowing a console like jconsole to remotely monitor and manage Oracle WebLogic using the JMX Mbeans. Typically management of Oracle WebLogic is done from Oracle Enterprise Manager or the Oracle Weblogic console application but you can also use JMX. To access the JMX capability for Oracle WebLogic 11g, for an Oracle Utilities Application Framework based product, using a JMX console (such as jconsole) the following process needs to be performed: Enable the JMX Management Server in the Oracle WebLogic console at splapp - Configuration - General - Advanced Settings option. Enable both Compatibility Mbean Server Enabled and Management EJB Enabled (this enables the legacy and new JMX interface). Save the changes This change will require a restart. In the startup of the Oracle WebLogic server in the $SPLSYSTEMLOGS/myserver.log (or %SPLESYSTEMLOGS%\myserver.log on Windows) you will see the BEA-149512 message indicating the Mbean servers have been started. The message will indicate the JMX URL that can be used to access the JMX Mbeans. The URL is in the format: service:jmx:iiop://host:port/jndi/mbeanserver where: host - Oracle WebLogic host name port - Oracle WebLogic port number mbeanserver - Mbean Server to access. Valid Values: weblogic.management.mbeanservers.runtime weblogic.management.mbeanservers.edit weblogic.management.mbeanservers.domainruntime For illustrative purposes we will use the domainruntime Mbean. Ensure that you execute the splenviron[.sh] utility to set the appropriate environment variables for the desired environment. Execute the following jconsole command to initiate the connection to the JMX Mbean server Windows: jconsole -J-Djava.class.path=%JAVA_HOME%\lib\jconsole.jar;%WL_HOME%\server\lib\wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote Linux/Unix jconsole -J-Djava.class.path=$JAVA_HOME/lib/jconsole.jar;$WL_HOME/server/lib/wljmxclient.jar -J-Djmx.remote.protocol.provider.pkgs=weblogic.management.remote You will see a New Connection Dialog. Specify the URL from the previous steps into the Remote process (i.,e. service:jmx:iiop...). The credentials are the credentials specified for the Oracle WebLogic console. You are now able to view the JMX classes available. Here is an example from my demonstration machine: Refer to the Oracle WebLogic Mbean documentation to understand the output.

  Read the article

• Need help with software licensing? Read on&hellip;

  - by juanlarios

  Figuring out which software licensing options best suit your needs while being cost-effective can be confusing. Some businesses end up making their purchases through retail stores which means they miss out on volume licensing opportunities and others may unknowingly be using unlicensed software which means their business may be at risk. So let me help you make the best decision for your situation. You may want to review this blog post that lays out licensing basics for any organization that needs to license software for more than 5 or less than 250 devices or users. It details the different ways you can buy a license and what choices are available for volume licensing, which can give you pricing advantages and provide flexible options for your business. As technology evolves and more organizations move to online services such as Microsoft Office 365, Microsoft Dynamics CRM Online, Windows Azure Platform, Windows Intune and others, it’s important to understand how to purchase, activate and use online service subscriptions to get the most out of your investment. Once purchased through a volume licensing agreement or the Microsoft Online Subscription Program, these services can be managed through web portals: · Online Services Customer Portal (Microsoft Office 365, Microsoft Intune) · Dynamics CRM Online Customer Portal (Microsoft Dynamics CRM Online) · Windows Azure Customer Portal (Windows Azure Platform) · Volume Licensing Service Center (other services) Learn more >> Licensing Resources: The SMB How to Buy Portal – receive clear purchasing and licensing information that is easy to understand in order to help facilitate quick decision making. Microsoft License Advisor (MLA) – Use MLA to research Microsoft Volume Licensing products, programs and pricing. Volume Licensing Service Center (VLSC) – Already have a volume License? Use the VLSC to get you easy access to all your licensing information in one location. Online Services – licensing information for off-premise options. Windows 7 Comparison: – Compare versions of Windows and find out which one is right for you. Office 2010 Comparison: – Find out which Office suite is right for you. Licensing FAQs – Frequently Asked Questions About Product Licensing. Additional Resources You May Find Useful: · TechNet Evaluation Center Try some of our latest Microsoft products For free, Like System Center 2012 Pre-Release Products, and evaluate them before you buy. · Springboard Series Your destination for technical resources, free tools and expert guidance to ease the deployment and management of your Windows-based client infrastructure.   · AlignIT Manager Tech Talk Series A monthly streamed video series with a range of topics for both infrastructure and development managers.  Ask questions and participate real-time or watch the on-demand recording.

  Read the article

• Gnome Shell segfault in libglib-2.0

  - by slohui

  I have been using Ubuntu 11.10 + Gnome Shell with a Nvidia card, but now I've moved it to my new PC which has an ATI card, at first it wasn't booting but I installed the driver from amd.com and then it worked. Anyway my problem is that gnome-shell is crashing, mostly when I try to start a VirtualBox machine (it happened in other times but I don't remember what I was doing). Sometimes gnome-shell respawns and it continue working but sometimes it doesn't so I have to restart lightdm and lose all the windows I was using. Here's some of the syslog when the crash occurs: Apr 9 12:20:08 desktop-1 NetworkManager[1032]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/vboxnet0, iface: vboxnet0) Apr 9 12:20:08 desktop-1 NetworkManager[1032]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/vboxnet0, iface: vboxnet0): no ifupdown configuration found. Apr 9 12:20:08 desktop-1 NetworkManager[1032]: <warn> /sys/devices/virtual/net/vboxnet0: couldn't determine device driver; ignoring... Apr 9 12:20:08 desktop-1 kernel: [ 4498.689561] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use) Apr 9 12:24:29 desktop-1 gnome-session[1617]: WARNING: Application 'gnome-shell.desktop' killed by signal Apr 9 12:24:45 desktop-1 gnome-session[1617]: WARNING: App 'gnome-shell.desktop' respawning too quickly Apr 9 12:24:45 desktop-1 gnome-session[1617]: CRITICAL: We failed, but the fail whale is dead. Sorry.... Apr 9 12:25:20 desktop-1 kernel: [ 4810.769775] show_signal_msg: 30 callbacks suppressed |----- > Apr 9 12:25:20 desktop-1 kernel: [ 4810.769785] gnome-shell[3427]: segfault at b0 ip b6bd09cd sp bfc9b650 error 4 in libglib-2.0.so.0.3000.0[b6b71000+f7000]** Apr 9 12:25:20 desktop-1 gnome-session[1617]: WARNING: Application 'gnome-shell.desktop' killed by signal Apr 9 12:25:23 desktop-1 kernel: [ 4814.055705] EXT4-fs (sda1): Unaligned AIO/DIO on inode 133295 by VirtualBox; performance will be poor. Apr 9 12:26:55 desktop-1 gnome-session[1617]: Gdk-WARNING: gnome-session: Fatal IO error 11 (Resource temporarily unavailable) on X server :0.#012 Apr 9 12:26:55 desktop-1 kernel: [ 4905.373256] [fglrx] IRQ 56 Disabled Apr 9 12:26:59 desktop-1 acpid: client 1124[0:0] has disconnected Apr 9 12:26:59 desktop-1 acpid: client connected from 3864[0:0] Apr 9 12:26:59 desktop-1 acpid: 1 client rule loaded Apr 9 12:26:59 desktop-1 kernel: [ 4909.700095] fglrx_pci 0000:02:00.0: irq 56 for MSI/MSI-X Apr 9 12:26:59 desktop-1 kernel: [ 4909.701466] [fglrx] Firegl kernel thread PID: 3867 Apr 9 12:26:59 desktop-1 kernel: [ 4909.701625] [fglrx] Firegl kernel thread PID: 3868 Apr 9 12:26:59 desktop-1 kernel: [ 4909.701852] [fglrx] Firegl kernel thread PID: 3869 Apr 9 12:26:59 desktop-1 kernel: [ 4909.702021] [fglrx] IRQ 56 Enabled Apr 9 12:26:59 desktop-1 kernel: [ 4909.861815] [fglrx] Gart USWC size:1280 M. Apr 9 12:26:59 desktop-1 kernel: [ 4909.861817] [fglrx] Gart cacheable size:508 M. Apr 9 12:26:59 desktop-1 kernel: [ 4909.861820] [fglrx] Reserved FB block: Shared offset:0, size:1000000 Apr 9 12:26:59 desktop-1 kernel: [ 4909.861821] [fglrx] Reserved FB block: Unshared offset:f8fd000, size:403000 Apr 9 12:26:59 desktop-1 kernel: [ 4909.861823] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000 Does anyone could guide me on how to fix this? Or the proper place where to ask for help.

  Read the article

• Create a Shortcut to Put Your Windows Computer into Hibernation

  - by Mysticgeek

  Putting your Windows computer into Hibernation Mode allows you to save power, and quickly access your desktop again when you need it. Here we show how to create a shortcut to put your PC in Hibernation Mode quickly. Note: Here we show how to create the shortcut in Windows 7 and add it to the Taskbar. But creating the shortcut should work in XP and Vista as well. Create Shortcut  Right-click an empty area on your desktop and select New \ Shortcut from the Context Menu. In the Create Shortcut window type or copy the following in the location field… C:\Windows\System32\rundll32.exe powrprof.dll, SetSuspendState 0,1,0 Now give the shortcut a name such as Hibernate Computer or whatever you want to call it. Now you have the shortcut on your desktop, but you might want to change the icon to something else. Change Shortcut Icon Right-click the shortcut icon and select Properties. Select the Shortcut Tab and click the Change Icon button. In the Look for icons in this file field copy and past the following then click OK. %SystemRoot%\system32\SHELL32.dll This brings up a list of included Windows icons you can choose from. Select whatever you want it to be. There are a couple of Power icons in the directory…click OK. Of course you can choose any icon you want, if you customize your icons just browse to the directory they are in. For more on selecting icons check out our article on how to customize your icons in Windows 7 or how to change a file type’s icon. Now you will see the icon in the Shortcut Properties window, click OK. Here we have a nice looking shortcut that you can use to put your machine into Hibernation. Or here we used a customized Star Trek icon just to make things more interesting… You can pin the shortcut to the Taskbar for easy access. Conclusion If Hibernation is not enabled on your Windows 7 system you can easily manage it. By creating a shortcut and pinning to the Taskbar, it allows you to put your machine into Hibernation Mode quick and easy. If you like to customize your desktop with unique icons check out our posts on a Sci-Fi icon pack or Video Game icon pack. Similar Articles Productive Geek Tips Create a Shortcut for Locking Your Computer Screen in Windows 7 or VistaCreate Shutdown / Restart / Lock Icons in Windows 7 or VistaHow To Manage Hibernate Mode in Windows 7Microsoft Releases Pre-SP1 Updates for Windows VistaCreate a Shortcut or Hotkey to Run CCleaner Silently TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 10 Superb Firefox Wallpapers OpenDNS Guide Google TV The iPod Revolution Ultimate Boot CD can help when disaster strikes Windows Firewall with Advanced Security – How To Guides

  Read the article

• SQL SERVER – Dedicated Access Control for SQL Server Express Edition – An error occurred while obtaining the dedicated administrator connection (DAC) port.

  - by pinaldave

  Recently I had faced very interesting situation. Due to some reason we were not able to login into the production server for one of client. The reason for the same was that server was very busy, we had to login into the system and bring server to normal situation. When all the attempts failed, I decided to login using Dedicated Administrator Connection (DAC). However when I attempted to connect using DAC it threw following error for me. C:\Users\pinald>sqlcmd -A -d master -S .\SQLEXPRESS Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : SQL Server Network Interfaces: An error occurred while obtaining the dedicated administrator connection (DAC) port. Make sure that SQL Browser is running, or check the error log for t he port number [xFFFFFFFF]. .Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : Login timeout expired.Sqlcmd: Error: Microsoft SQL Server Native Client 11.0 : A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections. For more information see SQL Server Books Online. I was bit taken a back as I knew that my commands are correct to login and if DAC does not work, there should be some serious reason for it. When inquired further about the SQL Server version I learned that it was SQL Server Express version deployed. To conserve resources, SQL Server Express does not listen on the DAC port. There is an additional step to be done if SQL Server Express has to be used with DAC. Enable TRACEFLAG on SQL Server Express will enable the connection by DAC possible. Here is the quick methods how one can enable DAC on SQL Server Express. Go to Start >> All Program >>Microsoft SQL Server (your version) >> Configuration Tools >> SQL Server Configuration Manager. Click on SQL Server Services >> Select your SQL Server Express version >> Right Click Properties >> select Startup Parameters Once on the Startup Parameter add the Startup parameter which is TRACEFLAG -T7806. Click on OK and RESTART SQL Server Express edition. Now once again try to connect to SQL Server Express edition and it will work just fine. This is absolutely documented method on BOL and SQL Server Express needs to be restarted. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: Pinal Dave, PostADay, SQL, SQL Authority, SQL Error Messages, SQL Interview Questions and Answers, SQL Query, SQL Server, SQL Tips and Tricks, SQLServer, T SQL, Technology Tagged: SQL Server Express

  Read the article

• Disable IE 8 Thumbnail Previews on Windows 7 Taskbar

  - by Asian Angel

  The Aero thumbnail previews are a great new feature, but if you are not a fan of the flashy eye-candy, you can get rid of them with a simple tweak. Here is how to do it. Before Here we are…Internet Explorer 8 with a lot of How-To Geek Network goodness ready to go. The Taskbar Thumbnail Previews look very nice, but perhaps they take up too much room for those of you who like to keep things simple. The Taskbar Icon has the classic “fanned edge” look just like any other software with Taskbar Thumbnail Previews active. Disabling the Thumbnail Previews If you want to deactivate the Taskbar Thumbnail Previews for Internet Explorer, it is quite easy and will only take you a few moments to complete. Open IE and go to Tools \ Internet Options. When the Internet Options Window opens you will already be on the General Tab. Under the Tabs Section, click on the Settings button. The Tabbed Browsing Settings window opens. Uncheck Show previews for individual tabs in the taskbar and click OK. When you are returned to the Internet Options Window, click OK once again to totally exit out. Note: A browser restart will be required for the changes to take effect. After you have restarted Internet Explorer, you will see the simple default Taskbar Thumbnail Preview and standard icon look. Conclusion If you have been looking to disable the Taskbar Thumbnail Previews for Internet Explorer, then you are only a few clicks away from satisfaction. If you want to change it back, it is as simple as re-enabling the Show previews for individual tabs in the taskbar setting. Similar Articles Productive Geek Tips Increase the size of Taskbar Preview Thumbnails in Windows 7Vista Style Popup Previews for Firefox TabsWorkaround for Vista Taskbar Thumbnail Previews Not Showing CorrectlyDisable Thumbnail Previews in Windows 7 or Vista ExplorerGet Vista Taskbar Thumbnail Previews in Windows XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

  Read the article

• Oracle's Australian Graduate Recruitment Program

  - by david.talamelli

  I have been with Oracle for 5 years now and one thing that I have found that there is never a shortage of here is - Variety. Over the last 5 years I have had the opportunity to work on projects across various countries, across various technologies and skill-sets and also across various level of seniority. No two days are the same. One of the projects I was fortunate to be involved in occurred last year and it is one of the ones that is closest to me. Last year I was able to take responsibility for our 2011 Graduate Recruitment drive in Australia. Two weeks ago I went to Sydney to meet our Graduates who started in February 2011 with us and it was great to see them come to the end (or beginning actually) of our journey together. I am excited at the potential of what our Graduates careers will develop into here with us. I remember at our interviewing last year trying to explain life in Oracle, it is great to see those same Graduates with us now learning and developing life and business skills that I hope they will take with them in their professional careers. I was talking to one of my colleagues this week who mentioned the excitement and energy that our new Graduates bring is infectious, and I agree it really is. Our Graduates have a big learning curve ahead of them and they are about to start going on rotations into some of our Business Groups - but I think it is a great experience to see how a global company operates and pulls together to achieve results together. Here is a picture we took the other week of this year's Oracle Graduates (if any of our Graduates are reading this blog - it was great seeing you in NSW and I do wish you all the success here at Oracle) Once again Oracle's Graduate Program will be running in 2011 in Australia (Graduates will start in Jan/Feb 2012). The Oracle Australia Graduate Development Program is a one-year program consisting of orientation, formal training, project rotations in one core line of business and finally job placement. The formal training is a combination of structured development programs on soft skills and functional competencies via various delivery formats. Graduates are also expected to work in a team environment and complete multiple projects addressing real business challenges and at the time gaining a broad business understanding. For our Australia program we are hiring in our North Ryde and Melbourne offices. Resume submissions are being accepted now. First Round interviews will take place in June 2011 with Final Round interviews in July 2011. The Australia Graduate Program is open to Australian Residents and Citizens who are either in the final year of their studies or have graduated the previous year. For more details on Oracle and our Graduate Program visit our Campus website To express your interest, mail your resume to [email protected]

  Read the article

• Week 21: FY10 in the Rear View Mirror

  - by sandra.haan

  FY10 is coming to a close and before we dive into FY11 we thought we would take a walk down memory lane and reminisce on some of our favorite Oracle PartnerNetwork activities. June 2009 brought One Red Network to partners offering access to the same virtual kickoff environment used by Oracle employees. It was a new way to deliver valuable content to key stakeholders (and without the 100+ degree temperatures). Speaking of hot, Oracle also announced in June new licensing options for our ISV partners. This model enables an even broader community of ISVs to build, deploy and manage SaaS applications on the same platform. While some people took the summer off, the OPN Program team was working away to deliver a brand new partner program - Oracle PartnerNetwork Specialized - at Oracle OpenWorld in October. Specialized. Recognized. Preferred. If you haven't gotten the message yet, we may need an emergency crew to pull you out from that rock you've been hiding under. But seriously, the announcement at the OPN Forum drew a big crowd and our FY11 event is shaping up to be just as exciting. OPN Specialized was announced in October and opened our doors for enrollment in December 2009. To mark our grand opening we held our first ever social webcast allowing partners from around the world to interact with us live throughout the day. We had a lot of great conversations and really enjoyed the chance to speak with so many of you. After a short holiday break we were back at it - just a small announcement - Oracle's acquisition of Sun. In case you missed it, here is a short field report from Ted Bereswill, SVP North America Alliances & Channels on the partner events to support the announcement: And while we're announcing things - did we mention that both Ted Bereswill and Judson Althoff were named Channel Chiefs by CRN? Not only do we have a couple of Channel Chiefs, but Oracle also won the Partner Program 5 Star Programs Award and took top honors at the CRN Channel Champion Awards for Financial Factors/Financial Performance in the category of Data and Information Management and the and Xchange Solution Provider event in March 2010. We actually caught up with Judson at this event for a quick recap of our participation: But awards aside, let's not forget our main focus in FY10 and that is Specialization. In April we announced that we had over 35 Specializations available for partners and a plan to deliver even more in FY11. We are just days away from the end of FY10 but hope you enjoyed our walk down memory lane. We are already planning lots of activity for our partners in FY11 starting with our Partner Kickoff event on June 29th. Join us to hear the vision and strategy for FY11 and interact with regional A&C leaders. We look forward to talking with you then. The OPN Communications Team

  Read the article

• Speech Recognition

  - by DesigningCode

  Today I was asked to write a wee application for someone so that they could turn pages on their ebooks without having to reach for their keyboard or mouse… that way they could do craft or knit or whatever they are doing while they are reading. I vaguely remember that windows has something built in, but have never really played with it before.   I have in the past turned on the screen reader and impressed my kids by making the computer saying “amusing” phrases along the lines of “Zac has a smelly bum”. So instead of firing up Visual Studio and getting stuck into the juciy task of writing a speech recognition program…. I typed “speech recognition” into the start menu of my windows 7 computer.   And wow!  I’ve been playing with it for the last 40 minutes or so and have been most impressed.   Dictation wise it certainly misses stuff or gets the wrong words, but I did the training and it certainly improved. But what I’m enjoying is controlling windows. for instance, to start this blog entry  I said “Open Writer”  and it worked no problem.    In fact after I muddled my way through getting going with speech recognition I enjoyed saying “Open notepad” … “close”  over and over again. It allows you to click anywhere on the screen, just say “mousegrid”   and a 1-9 numbered grid comes up,  say a number and it puts a smaller 1-9 numbered grid, and you hone in, till the middle square is on a place you want to click, then you say “click” or “double click”.  if you want to enter a key, say “Press Tab”  for example.   inside programs it understands menu entries.  In fact, while writing this I just said “File”  “Save” and it happily saved. I think I will play around with this for a while more and try it out in visual studio.   Might be quite good for being able to do menu entries instead of grabbing for my mouse…. can keep my hands on the keyboard. ok, wasn’t the first post I wanted to do on geeks with blogs! but hey…   will do some techy posts soon.

  Read the article

• Multi-Threaded Application vs. Single Threaded Application

  Why would we use a multi threaded application vs. a single threaded application? First we must define multithreading. Multithreading is a feature of an operating system that allows programs to run subcomponents or threads in parallel. Typically most applications only need to use one thread because they do not perform time consuming tasks. The use of multiple threads allows an application to distribute long running tasks so that they can be executed in parallel. This gives the user the perceived appearance that the application is working faster due to the fact that while one thread is waiting on an IO process the remaining tasks can make use of the available CPU. The allows working threads to execute in tandem so that they can be competed sooner. Multithreading Benefits Improved responsiveness — Users usually report improved responsiveness compared to single thread applications. Faster applications — Multiple threads can lead to improved application performance. Prioritization — Threads can be assigned a priority which would allow higher priority tasks to take precedence over lower priority tasks. Single Threading Benefits Programming and debugging —These activities are easier compared to multithreaded applications due to the reduced complexity Less Overhead — Threads add overhead to an application When developing multi-threaded applications, the following must be considered. Deadlocks occur when two threads hold a monitor that the other one requires. In essence each task is blocking the other and both tasks are waiting for the other monitor to be released. This forces an application to hang or deadlock. Resource allocation is used to prevent deadlocks because the system determines if approving the resource request will render the system in an unsafe state. An unsafe state could result in a deadlock. The system only approves requests that will lead to safe states. Thread Synchronization is used when multiple threads use the same instance of an object. The threads accessing the object can then be locked and then synchronized so that each task can interact with the static object on at a time.

  Read the article

• Getting Started With nServiceBus on VAN Mar 31

  - by van

  Topic: nServiceBus is mature and powerful open source framework that enables to design robust, scalable, message-based, service-oriented architectures. Latest improvements in the configuration API enables developers to quickly get started and build a working simple system that uses messaging infrastructure. The goal of this session is to give a jump start with the framework, introduce basic concepts such as message handlers, Sagas, Pub/Sub, Generic Host and also create a working demo application that uses publish/subscribe messaging. The content of the session is addressed to developers that are interested in learning how to get started using nServiceBus in order to design and build distributed systems. Bio: Bernard Kowalski is currently a Software Developer at Microdesk, one of Autodesk's leading partners in providing variety of Geospatial and Computer-Aided Design solutions. Bernard has experience developing .NET framework-based applications utilizing Windows Forms, Windows Services, ASP.NET MVC, and Web services. In a recent project, Bernard architected and implemented a distributed system based on SOA principles using an open source implementation of an Enterprise Service Bus. Bernard develops software with Agile patterns and practices using Domain Driven Design combined with TDD (Test Driven Development). He is familiar with all of the following APIs: Autodesk Vault/Product Stream API, AutoCAD ActiveX/VBA/.NET API, AutoCAD Mechanical API, Autodesk Inventor API, Autodesk MapGuide Enterprise. Prior to joining Microdesk, Bernard worked as a researcher and teacher at the University of Science and Technology in Krakow, Poland where he was awarded with a PhD in Computer Methods in Materials Science. He also participated in research projects where he developed applications for analysis of hot compression test results using advanced optimization techniques. He also developed Finite Element Method-based programs for thermal and stress analysis using C++ and FORTRAN. Bernard is a member of the Domain Driven Design and ALT.NET user groups in NYC. Virtual ALT.NET (VAN) is the online gathering place of the ALT.NET community. Through conversations, presentations, pair programming and dojos, we strive to improve, explore, and challenge the way we create software. Using net conferencing technology such as Skype and LiveMeeting, we hold regular meetings, open to anyone, usually taking the form of a presentation or an Open Space Technology-style conversation. Please see the Calendar(http://www.virtualaltnet.com/Home/Calendar) to find a VAN group that meets at a time convenient to you, and feel welcome to join a meeting. Past sessions can be found on the Recording page. To stay informed about VAN activities, you can subscribe to the Virtual ALT.NET Google Group and follow the Virtual ALT.NET blog. Times below are Central Standard Time Start Time: Wed, Mar 31, 2010 8:00 PM UTC/GMT -5 hours End Time: Wed, Mar 31, 2010 10:00 PM UTC/GMT -5 hours Attendee URL: http://www.virtualaltnet.com/van Zach Young http://www.virtualaltnet.com

  Read the article

• StreamInsight and Reactive Framework Challenge

  In his blogpost Roman from the StreamInsight team asked if we could create a Reactive Framework version of what he had done in the post using StreamInsight.  For those who don’t know, the Reactive Framework or Rx to its friends is a library for composing asynchronous and event-based programs using observable collections in the .Net framework.  Yes, there is some overlap between StreamInsight and the Reactive Extensions but StreamInsight has more flexibility and power in its temporal algebra (Windowing, Alteration of event headers) Well here are two alternate ways of doing what Roman did. The first example is a mix of StreamInsight and Rx var rnd = new Random(); var RandomValue = 0; var interval = Observable.Interval(TimeSpan.FromMilliseconds((Int32)rnd.Next(500,3000))) .Select(i => { RandomValue = rnd.Next(300); return RandomValue; }); Server s = Server.Create("Default"); Microsoft.ComplexEventProcessing.Application a = s.CreateApplication("Rx SI Mischung"); var inputStream = interval.ToPointStream(a, evt => PointEvent.CreateInsert( System.DateTime.Now.ToLocalTime(), new { RandomValue = evt}), AdvanceTimeSettings.IncreasingStartTime, "Rx Sample"); var r = from evt in inputStream select new { runningVal = evt.RandomValue }; foreach (var x in r.ToPointEnumerable().Where(e => e.EventKind != EventKind.Cti)) { Console.WriteLine(x.Payload.ToString()); } This next version though uses the Reactive Extensions Only   var rnd = new Random(); var RandomValue = 0; Observable.Interval(TimeSpan.FromMilliseconds((Int32)rnd.Next(500, 3000))) .Select(i => { RandomValue = rnd.Next(300); return RandomValue; }).Subscribe(Console.WriteLine, () => Console.WriteLine("Completed")); Console.ReadKey();   These are very simple examples but both technologies allow us to do a lot more.  The ICEPObservable() design pattern was reintroduced in StreamInsight 1.1 and the more I use it the more I like it.  It is a very useful pattern when wanting to show StreamInsight samples as is the IEnumerable() pattern.

  Read the article

< Previous Page | 285 286 287 288 289 290 291 292 293 294 295 296  | Next Page >