Search Results

Search found 1180 results on 48 pages for 'clock'.

Page 29/48 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36 | Next Page >

What does the "Maximum Frequency" number mean in the Windows Resource Monitor?

- by nhinkle

In the Windows Resource Monitor's CPU tab, there is a status box and graph for the "Maximum Frequency", right next to the "CPU Usage" values. What does this mean? The value is sometimes over 100% on my system... what could that imply? By looking at CPU-z's real-time report of the processor's clock speed, it seems to be loosely related to what frequency the CPU is running at, which would imply that it means "percent of maximum possible frequency the CPU is running at"; this would be of relevance on systems with SpeedStep and/or TurboBoost technology (or similar). Furthermore, setting the system to "power saving mode" lowers the "maximum frequency" value to around 60%, while setting it to "high performance" mode sets it to around 110%. However, the percentage does not seem to exactly correlate to the CPU speed being shown. What value is this actually representing then?

Read the article
How can I prevent the warning No xauth data; using fake authentication data for X11 forwarding?

- by Sorin Sbarnea

Every time I initiate an ssh connection from my Mac to a Linux (Debian) I do get this warning: No xauth data; using fake authentication data for X11 forwarding. This also happens for tools that are using ssh, like git or mercurial. I just want to make a local change to my system in order to prevent this from appearing. Note: I do have X11 server (XQuartz 2.7.3 (xorg-server 1.12.4)) on my Mac OS X (10.8.1) and it is working properly, I can successfully start clock locally or remotely.

Read the article
Windows Updates - Does Not Install, how can I remove it

- by Kanini

Everytime I shutdown my Windows XP, it comes up with the following screen which says Turn Off with Installing Updates (Of course, it also gives me an option as follows, "Click here to turn off without installing updates.") When I do a normal shutdown asking it to "Install Updates and Turn It Off", it doesn't actually install the updates. Each subsequent time I try to shut down the PC, it still prompts me to "Turn Off with Installing Updates". I managed to find out that the install was this: Installing Microsoft SQL Server 2005 Express Edition Service Pack 3 (KB955706) update 1 of 1 .... When I click on the Installing Updates icon (the yellow icon, that appears on the task bar near the clock), and install it, it tries to install but fails: Why is this install alone failing? Secondly, if it's not possible to ascertain why the installation is failing, can I at least ensure that it's removed from the list of possible installs so that each time it does not ask me to install it?

Read the article
Is Gadget on Windows 7 buggy for now?

- by Jian Lin

Is Gadget on Windows 7 buggy for now? For example, I made CPU Meter, Clock "always on top", but sometimes, one is on top but the other is not. I have to make it "not always on top" and then "always on top" again and it will show up on top again. another thing that might or might not be a bug is: even when viewing video in full screen mode, the gadgets are all there. This may be one case where the user won't want all the gadgets on top when viewing a video full screen.

Read the article
configure time sync for azure VMs

- by Pharao2k

I have several ExtraSmall-sized Azure VMs (PaaS / Cloud Service based) that are all experiencing drifting of the Windows clock. Research showed that this is quite common, especially in VMs with shared cores. Unfortunately even after configuring the w32time service to sync with time.windows.com and forcing a resync (w32tm /resync), there seems to be a time difference of 2 seconds to the configured NTP server. Though Microsoft states that w32tm is not meant as a high-precision sync tool, a difference of 2 seconds is (IMO) quite a lot for server-activities/processing. What does one have to do to get more accurate time sync?

Read the article
Are there pitfalls to using incompatible RAM (frequencies) in motherboards?

- by osij2is

I'd like to use 2 x 4GB DDR3 1600 dimms in a motherboard capable of only DDR3 1066. The DDR3 1600 is on sale and the cost is identical to 1066 dimms. It'd be nice to have these faster sticks around should i upgrade the motherboard. I assume the RAM can under clock itself or be changed in the BIOS. While obviously it's less than ideal situation, I don't know if there are other unintended consequences in terms of stability, performance and longevity of the board and said RAM. Am I doing any damage to the memory controller or RAM? I've always bought RAM at the max speed specified for the motherboard and I've never gone over so I'm not sure if there any caveats to this at all. Edit: I intend to use the RAM in pairs. I know that mixing RAM speeds is just a bad idea.

Read the article
Why is systemd not setting my system time?

- by Alex Chamberlain

I'm running Arch Linux. Recently, when I turn on my PC, the system time is set to 1:00 1 January 1970 - presumably the 1:00 o'clock is from the timezone shift. Does anyone have any ideas why systemd isn't setting my system time correctly? Some useful output (I think)... [root@alex-desktop network.d]# timedatectl status Local time: Sun 2013-06-09 16:33:04 BST Universal time: Sun 2013-06-09 15:33:04 UTC RTC time: Sun 2013-06-09 15:18:50 Timezone: Europe/London (BST, +0100) NTP enabled: yes NTP synchronized: no RTC in local TZ: no DST active: yes Last DST change: DST began at Sun 2013-03-31 00:59:59 GMT Sun 2013-03-31 02:00:00 BST Next DST change: DST ends (the clock jumps one hour backwards) at Sun 2013-10-27 01:59:59 BST Sun 2013-10-27 01:00:00 GMT

Read the article
My VPS Server's TimeZone always resets on reboot - Why?

- by GenericTypeTea

I'm using a VPS running Virtuozzo Containers with Parallels. Every time I reboot it sets the server's TimeZone to GMT+01 Amsterdam. If I change that to GMT+00 London and then reboot, it gets set back to Amsterdam again. Is there any way I can prevent this? I'm also have a very strange issue whereby .Net is reporting that the DateTime.Now as the +01 Amsterdam time instead of +00 GMT, even after I've change it to London's TimeZone. Is there somewhere else I need to change the TimeZone apart from in the Timezone tab under the system clock?

Read the article
Debian date jumping, causing complete lockup

- by artfulrobot

I have a Debian Squeeze VM that has suddenly chosen to jump it's date forwards just over a month, which seems to confuse it no end and cause it to require a hard reset (yikes!). There is nothing unusual in the logs, except that the datestamp suddenly jumps (today back to 2005). It's happened three times, so I don't think it's to do with the leap second issue as the last one of those was in July. When it happened once I spent ages checking stuff but could not find anything, decided to forget it. But three times is becoming an issue on a production server. Edits providing information requested in comments (thanks!): I do not have control over the hypervisor, it is a hired VM. # cat /sys/devices/system/clocksource/clocksource0/current_clocksource kvm-clock # ntpq -p remote refid st t when poll reach delay offset jitter ============================================================================== +grendel.exizten 130.149.17.8 2 u 29 64 77 14.811 1.778 1.744 *panoramix.linoc 193.67.79.202 2 u 32 64 77 19.729 -0.419 1.691 +robert.elnounch 213.251.128.249 2 u 27 64 77 17.762 0.600 1.722 -janetzki.eu 83.169.43.165 3 u 31 64 77 27.214 3.575 1.638

Read the article
Suggestions for Troubleshooting WIndows 7 lockups

- by Craig L

I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

Read the article
Windows 7 Taskbar disappears overnight

- by eidylon

Hello all, I've got this problem that started happening recently. Overnight, something is happening that makes my taskbar disappear on my laptop. The Start orb is still there, and if I click it, it pops up the start menu, but the whole rest of the taskbar, including the background behind the start orb, is just completely vanished: tray icons, running programs, clock, everything. I tried killing explorer.exe and restarting it, but it doesn't restart. And after killing it, Task Manager won't let me start ANY programs. It gives no errors, just ... doesn't run them. Anyone else see this or know what it might be? I'm running Windows 7 RC on an IBM ThinkPad R51 with 2GB ram.

Read the article
Date header returned by IIS7 is wrong

- by James Hollingworth

I am serving an ASP.NET application from IIS 7 but we are experiencing some weird cookie issues. The code works fine in other environments so we are assuming this is specific to this server (related question). We have been looking at the http headers returned and someone pointed out that the date http header is showing the 1st of Jan rather than today's date (so far it always shows that date regardless of what the current date is). The system clock is set correctly (and we can print out the current time/date via DateTime.Now correctly as well) so we can't work out why it's now working. Does anyone have any ideas? Is this a red-herring? Thanks, James

Read the article
Can't access shared drive when connecting over VPN

- by evolvd

I can ping all network devices but it doesn't seem that DNS is resolving their hostnames. ipconfig/ all is showing that I am pointing to the correct dns server. I can "ping "dnsname"" and it will resolve but it wont resolve any other names. Split tunnel is set up so outside DNS is resolving fine So one issue might be DNS but I have the IP address of the server share so I figure I could just get to it that way. example: \10.0.0.1\ well I can't get to it that way either and I get "the specified network name is no longer available" I can ping it but I can't open the share. Below is the ASA config : ASA Version 8.2(1) ! hostname KG-ASA domain-name example.com names ! interface Vlan1 nameif inside security-level 100 ip address 10.0.0.253 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address dhcp setroute ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns domain-lookup outside dns server-group DefaultDNS name-server 10.0.0.101 domain-name blah.com access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 10000 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 8333 access-list OUTSIDE_IN extended permit tcp any host 10.0.0.253 eq 902 access-list SPLIT-TUNNEL-VPN standard permit 10.0.0.0 255.0.0.0 access-list NONAT extended permit ip 10.0.0.0 255.255.255.0 10.0.1.0 255.255.255.0 pager lines 24 logging asdm informational mtu inside 1500 mtu outside 1500 ip local pool IPSECVPN-POOL 10.0.1.2-10.0.1.50 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-621.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list NONAT nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) tcp interface 10000 10.0.0.101 10000 netmask 255.255.255.255 static (inside,outside) tcp interface 8333 10.0.0.101 8333 netmask 255.255.255.255 static (inside,outside) tcp interface 902 10.0.0.101 902 netmask 255.255.255.255 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authentication enable console LOCAL aaa authentication http console LOCAL aaa authentication serial console LOCAL aaa authentication ssh console LOCAL aaa authentication telnet console LOCAL http server enable http 10.0.0.0 255.255.0.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set myset esp-aes esp-sha-hmac crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map dynmap 1 set transform-set myset crypto dynamic-map dynmap 1 set reverse-route crypto map IPSEC-MAP 65535 ipsec-isakmp dynamic dynmap crypto map IPSEC-MAP interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 crypto isakmp policy 65535 authentication pre-share encryption aes hash sha group 2 lifetime 86400 telnet 0.0.0.0 0.0.0.0 inside telnet timeout 5 ssh 0.0.0.0 0.0.0.0 inside ssh 70.60.228.0 255.255.255.0 outside ssh 74.102.150.0 255.255.254.0 outside ssh 74.122.164.0 255.255.252.0 outside ssh timeout 5 console timeout 0 dhcpd dns 10.0.0.101 dhcpd lease 7200 dhcpd domain blah.com ! dhcpd address 10.0.0.110-10.0.0.170 inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept ntp server 63.111.165.21 webvpn enable outside svc image disk0:/anyconnect-win-2.4.1012-k9.pkg 1 svc enable group-policy EASYVPN internal group-policy EASYVPN attributes dns-server value 10.0.0.101 vpn-tunnel-protocol IPSec l2tp-ipsec svc webvpn split-tunnel-policy tunnelspecified split-tunnel-network-list value SPLIT-TUNNEL-VPN ! tunnel-group client type remote-access tunnel-group client general-attributes address-pool (inside) IPSECVPN-POOL address-pool IPSECVPN-POOL default-group-policy EASYVPN dhcp-server 10.0.0.253 tunnel-group client ipsec-attributes pre-shared-key * tunnel-group CLIENTVPN type ipsec-l2l tunnel-group CLIENTVPN ipsec-attributes pre-shared-key * ! class-map inspection_default match default-inspection-traffic ! ! policy-map global_policy class inspection_default inspect icmp ! service-policy global_policy global prompt hostname context I'm not sure where I should go next with troubleshooting nslookup result: Default Server: blahname.blah.lan Address: 10.0.0.101

Read the article
How can I judge the suitability of modern processors for systems with specific CPU requirements?

- by Iszi

Inspired by this question: How do I calculate clock speed in multi-core processors? The answers in the above question do a fair job of explaining why a lower-speed multi-core processor won't necessarily perform at the same level as a higher-speed single-core processor. Example: 4*2=8, but a quad-core 2 GHz processor isn't necessarily as fast as a single-core 8 GHz processor. However, I'm having a hard time putting the information in those answers to practical use in my mind. Particularly, I want to know how it should be used to judge whether a given CPU is appropriate for an application with specific requirements. Example scenarios: An application has a minimum CPU requirement of 2.4 GHz dual-core. Another application has a minimum CPU requirement of 1.8 GHz single-core. For either of the above scenarios: Would a higher-speed processor with fewer cores, or a lower-speed processor with more cores, be equally sufficient? If so, how can we determine the appropriate processor speeds required for a given number of cores?

Read the article
When clicking an irc:// link, a new instance of chatzilla opens instead of the existing one being used.

- by WebDevHobo

That is my problem in a nutshell. I'm running Win7 32-bit. I have chatzilla on XulRunner, so not as the Firefox add-on. When I clock any irc:// link, a new instance of Chatzilla will be started. I have a lot of startup-commands set, so all those will be executed. I stop the new instance before it takes off, but this is rather annoying. Firefox application setting just link to the path where the executable is, with no option to set any command-line stuff to make the existing instance be used. Is there any firefox or windows setting that I can manipulate, so that when firefox calls chatzilla.exe, the existing instance is used instead of a new one opened?

Read the article
Few questions about SLI

- by toomanyairmiles

Hi all, thanks in advance for your help. I've just added a second card to my system so I can add a third monitor. I'd got as far as determining both cards need to use the same driver (after a blind alley with another cheap ATi card) so I'm now the proud owner of a second BFG 9800 GTX+ card. One is a BFG OCX and the other an BFG OC (small difference in clock speeds but they are in all other respects the same) but wanted to know the following:- 1) Is it worth adding the SLI connector, will it really boost overall performance (I'm guessing that the OCX card will then perform as the OC card does)? 2) Are SLI connectors (the one's that run across the top of the cards) motherboard or manufacturer specific? 3) If I do SLI the cards will I still be able to use all four monitor connectors or just the two on the master card? I'm not a gamer, I'm an IA and web designer so the system is mostly for Photoshop and Illustrator work and the occasional knock around in command and conquer.

Read the article
Why is ntpd not updating the time on my server?

- by John

I have ntpd running on my server. It's all the default settings, except I commented out its ability to be a server to other machines: # restrict -4 default kod notrap nomodify nopeer noquery # restrict -6 default kod notrap nomodify nopeer noquery restrict default ignore If I run ntpdate -q ntp.ubuntu.com, I'm told that my machine's clock is off by 7 seconds. What's going on? How can I diagnose what's happening, is there a log I can turn on? more info #1 # ntpq -np remote refid st t when poll reach delay offset jitter ============================================================================== 91.189.94.4 193.79.237.14 2 u 30 64 7 108.518 -0.136 0.361 more info #2 Here's what this looked like when I asked the question: # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 7.191308, delay 0.13310 10 Jan 20:38:09 ntpdate[31055]: step time server 91.189.94.4 offset 7.191308 sec And here's what it looks like now, after restarting ntpd a couple times (I'm assuming that's what fixed it): # ntpdate -q ntp.ubuntu.com server 91.189.94.4, stratum 2, offset 0.000112, delay 0.13164 10 Jan 20:47:03 ntpdate[31419]: adjust time server 91.189.94.4 offset 0.000112 sec

Read the article
php.ini date.timezone usefulness?

- by Buttle Butkus

I'm not sure if this is a question for serverfault or stackoverflow but it seems like it has a lot to do with server config. We have a server in chicago and the server's clock is on chicago time. But since the business is located in California, it would seem to make sense to use pacific time. What happens when server time is Chicago, and php.ini directive date.timezone is set to "America/Los_Angeles"? How will that affect logs written to mysql, error logs, etc? I've looked at the Apache error log and, as I expected, the php directive does not affect it. Times are all servertime. Thanks.

Read the article
Daylight Savings Time and Microsoft Exchange woes

- by Scott

Ever since the switch from Standard Time to Daylight Time, the time on our e-mail messages has been ahead by one hour. This symptom has me wondering if the cause is improper configuration of daylight savings settings. Since we're in a client/server environment, the clients synchronize with the server, and the server synchronizes with Boulder, Colorado. If I set both the server and the clients to automatically switch to daylight savings, the clients seem to regard the server as being set to Standard Time and set themselves an hour ahead of it, which is really two hours ahead. Should the server switch to daylight savings and the clients follow along on their next synchronization, or should the server stay on Standard Time and the clients switch over? The system clock on the Exchange Server is currently displaying the correct time. How do I get the e-mail messages to display the correct time in Outlook?

Read the article
ASA 5505 Vlan question

- by Wayne

I am setting up a cisco asa 5505 with the base license. I can communicate from inside-outside, outside-inside, inside-home, which is my desired traffic security. I can get http, ssh, and other access from inside-home, but I can't ping from inside-home (192.168.110.0 host to 192.168.7.1 or 192.168.7.0 host). Can someone explain. My config is listed below interface Vlan1<br> nameif inside<br> security-level 100<br> ip address 192.168.110.254 255.255.255.0 <br> !<br> interface Vlan2<br> nameif outside<br> security-level 0<br> pppoe client vpdn group birdie<br> ip address removedIP 255.255.255.255 pppoe <br> !<br> interface Vlan3<br> no forward interface Vlan1<br> nameif home<br> security-level 50<br> ip address 192.168.7.1 255.255.255.0 <br> ! <br> interface Ethernet0/0<br> switchport access vlan 2<br> ! <br> interface Ethernet0/1<br> ! <br> interface Ethernet0/2<br> ! <br> interface Ethernet0/3<br> ! <br> interface Ethernet0/4<br> switchport access vlan 3<br> ! <br> interface Ethernet0/5<br> shutdown <br> ! <br> interface Ethernet0/6<br> shutdown <br> ! <br> interface Ethernet0/7<br> shutdown <br> ! <br> ftp mode passive<br> clock timezone EST -5<br> clock summer-time EDT recurring<br> access-list Outside-In extended permit icmp any any <br> access-list Outside-In extended permit tcp any any eq www <br> access-list Outside-In extended permit tcp any any eq https <br> access-list Outside-In extended permit tcp any any eq 5969 <br> access-list inside_nat0_outbound extended permit ip any 192.168.111.0 255.255.255.224 <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.111.0 255.255.255.0 any <br> access-list standardUser_splitTunnelAcl1 extended permit ip 192.168.110.0 255.255.255.0 <br>any access-list inside_in extended permit icmp any any <br> access-list inside_in extended permit ip any any <br> access-list home_in extended permit icmp any any <br> access-list home_in extended permit ip any any <br> pager lines 24<br> logging enable<br> logging asdm informational<br> mtu inside 1492<br> mtu outside 1492<br> mtu home 1500 <br> ip local pool vpnuser 192.168.111.5-192.168.111.20<br> icmp unreachable rate-limit 1 burst-size 1<br> asdm image disk0:/asdm-524.bin<br> no asdm history enable<br> arp timeout 14400<br> nat-control <br> global (outside) 1 interface<br> nat (inside) 0 access-list inside_nat0_outbound<br> nat (inside) 1 0.0.0.0 0.0.0.0<br> nat (home) 1 192.168.7.0 255.255.255.0<br> static (inside,outside) tcp interface https 192.168.110.6 https netmask 255.255.255.255 <br> static (inside,outside) tcp interface www 192.168.110.6 www netmask 255.255.255.255 <br> static (inside,outside) tcp interface 5969 192.168.110.12 5969 netmask 255.255.255.255 <br> static (inside,home) 192.168.110.0 192.168.110.0 netmask 255.255.255.0 <br> access-group inside_in in interface inside<br> access-group Outside-In in interface outside<br> access-group home_in in interface home<br> route outside 0.0.0.0 0.0.0.0 RemovedIP 1<br>

Read the article
What affects video encoding speeds?

- by Pig Head

FRAPs doesn't compress its videos when you record, so the files are enormous. In a long recording you can get up to a few hundred gigabytes. Obviously, usually you would need to convert/compress them. What affects the speed of this? I don't think the RAM does, as when I converted 600 gb my RAM usage only went to 6 gig, but the processor was at 100%, which is surprising as I have a 6 core processor @ 3.46 ghz. Would clock speed or cores help the most?

Read the article
NTP doesn't sync

- by Jonathan

I'm using Meinberg NTP to sync the time in a VPS. The clock refuses to sync - there's a ~30s shift comparing to other servers. Meinberg NTP comes with a status script that checks hte delay\jitter every 10s and it is showing all zeros. Actions I've taken which didn't help: Restarted the NTP service using a script that comes with Meinberg NTP Added port 123 for UDP and TCP as an exception port to Windows Firewall Added Meinberk NTP executables as an exception program to Windows Firewall validated iburst appears after each server listed in the configuration file Restarted the server The OS is a Windows Server Standard SP2 32bit. What did I miss?

Read the article
Old laptop turns off due to overheating

- by Jake Thomas

I have an old Laptop that powers off when the processor's temperature exceeds 84degs Celsius. The more annoying part is flash causes this the most of the times. If I watch a web feed for more than 15-20mins, it results into hard shutdown of the machine. I have an idea of a could-be solution to this problem, I want a program that would decrease the processor's clock speed to about 1.2GHz or whatever, leading it a lower temperature. Is there a program out there that does this? P.S. Someone please edit this and add the relevant tags, as I'm new and i have no idea of what tags to choose from.

Read the article
Windows 7 tips and tricks

- by Pyrolistical

Related Question: Which windows tweaks do you use and they actually work? Tell us your favorite Windows 7 tips and tricks. Here's some I bet you never have heard of: Win + Arrow and Win + Shift + Arrow controls window location and even moves window to next monitor if you have multiple ones Win + P controls project/multiple monitors The pinned icons on the new taskbar can be launched by Win + 1, Win + 2, etc Launch a pinned icon again by using mouse 3, meaning you can open another Firefox window by just wheel clicking the icon! From The Bumper List of Windows 7 Secrets And a few more off the top of my head: Use the favorites at the top left in Windows Explorer. Drag commonly used folders to it, its super handy You can drag the task icons in and out of hidden icons The show desktop button is now that rectangle next to the clock on the task bar What tips and tricks do you have?

Read the article
PC reboots spontaenously: debugging tips

- by aaron

I swapped my core 2 duo for a quad core recently, and generally things run fine, but every now and then my computer just restarts. I don't even get a blue screen (Vista 32). Core temp isn't a problem. My thinking is that my power supply is inadequate, but I haven't been able to test that (one idea was to under clock the cpu to see if that helped, but going up in speed was the only simple thing to do in the BIOS) Two cases where I semi-consistanly get problems: - Borderlands windowed after some period of time (and some other games, but Borderlands does it pretty regularly) - watching a video (e.g. quicktime/vlc) and having another video running Another thought is non-cpu heat? Maybe the graphics card? Any thoughts on how to track this down appreciated. Thanks!

Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36 | Next Page >