Search Results

Search found 3214 results on 129 pages for 'dell latitude'.

Page 29/129 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedor

  - by Jim Dobbs

  Dell Dimension 2350 with a Pentium IV processor and integrated video and network chips running Fedora12 does a "Sleeping Beauty" and I, apparently, am not am not a "handsome prince"! The system puts video and network to sleep and it will not wakeup. I have heard of this problem on laptops, but this is a tower. Any ideas or help is appreciated. I tried to ping the network card from another system and ping fails. The logs indicate that the system continues to be active. Pressing keyboard short-cut keys makes the disk light blink but neither the video or network card comes alive. Failing all else, are there any Linux commands that I could schedule in cron to pulse video and network adapters hourly that will keep them awake? Or, should I wait on Fedora13? Before this machine, I built a Dimension 2400 with Pentium IV and it had the same problem. Fedora9 on the same hardware is fine.

  Read the article

• Application (was Firefox) crash on first load on Ubuntu Linux on older Dell Laptop

  - by Ira Baxter

  I've had a Dell Latitude laptop since about 2000 without managing to destroy it. A month ago the Windows 2000 system on it did something stupid to its file system and Windows was completely lost. No point in reinstalling Windows 2000, so I installed an Ubuntu Linux on the laptop. Everything seems normal (installed, rebooted, I can log in, run GnuChess, poke about). ... but ... when I attempt to launch Firefox from the top bar menu icon, I get a bunch of disk activity, the whirling cursor icon goes round a bit and then (WAS: everything stops: icon, mouse. Literally nothing happens for 5 minutes. Ubuntu is dead, as far as I can tell. EDIT : on further investigation, spinning icon, mouse operated by touchpad freeze. There's apparantly a little disk activity occuring about every 5 seconds. I wait 5-10 minutes, behavior doesn't change) A reboot, and I can repeat this reliably. So on the face of it, everything works but Firefox. That seems really strange. The only odd thing about this system when Firefox is booting is that while it has an Ethernet port (that worked fine under Windows), it isn't actually plugged into an Ethernet. As this is the first Firefox boot since the Ubuntu install, maybe Firefox mishandles Internet access? Why would that crash Ubuntu? (I need to go try the obvious experiment of plugging it in). EDIT: I tried to run the Disk manager tool, not that I cared what it was, just a menu-available application. It started up like Firefox, I get a little tag in the lower left saying Disk P*** something had started, and then the same behavior as Firefox. At this point, I don't think its the Ethernet. Is it possible that the Ubuntu disk driver can't handle the disk controller in this older laptop? The install seemed to go fine.

  Read the article

• How to play games in widescreen in Windows 7, Dell Studio 1555

  - by blasteralfred

  I have a dell studio 1555 laptop with a GPU inside. The details are below; Hardware details Software details I can play games in widescreen in Vista, but not in 7. I am using Windows 7 Home Premium. I have the latest Catalyst Control Center. Instead of widescreen, the games are running in a classic style, say 1024x768 ratio. When I play need for speed underground, the maximum possible resolution is 1024x768 (all other games are like this). I have no problem with HD videos and anything else. How can I fix this? Thanks in advance...:)

  Read the article

• Dell Inspirion 1525 64bit driver compatibility

  - by Tony

  Hello, Can anyone tell me what the compatibility of drivers on 64bit vista are like on the Dell Inspiron 1525. Mine is just a year old now and I want to upgrade to 64bit vista. I wondered if there's known issues with drivers that I should be aware of before upgrading? Tony PS: is the upgrade worth it? My machine has 3GB of RAM and runs a T5800 2.0GHz DuoCore Processor. I use Visual Studio often and have loads of things open at the same time a lot. That's why I'm considering an upgrade.

  Read the article

• USB 3 adapter for a dell 2850 with PCI (or PCIX) ports

  - by Don Dickinson

  Does anyone know if there is a plain PCI (or PCIX) USB 3 adapter. i understand the bandwidth of PCI < USB3, but it still beats the heck out of USB 2. i have some older dell 2850s that do not have the PCI E ports that most USB 3 adapters require. i'd really like to get usb3 in those servers. i searched the internet but didn't see any. the local computer store said they only had pcie adapters. tia, don

  Read the article

• How to clean this Dell Precision M6400

  - by Daniel Pratt

  I have (well, ok, my employer has and I use) a Dell Precision M6400 notebook. It's a decent piece of hardware, but I have at least one major gripe: It's a dust and...uh...crumb (I repent! I repent!) magnet! And I cannot seem to exorcise the dust/crumbs from it! There is a strip of metal above the keyboard that is punched full of tiny holes. Well, maybe it's better to describe them as 'pits'. If a sufficiently small particle finds its way into one of those pits, there is only about a 50% that I will manage to get it out. Consequently, there is now a chorus of tiny little particles silently chiding me about eating cookies a cracker whilst I browse the intarwebs. Does anyone have any suggestions about how I could remove these particles from this machine...while still preserving the function of the machine?

  Read the article

• Hard Drive upgrade advice for a Dell PowerEdge 1950

  - by user8185

  My setup is a Dell PowerEdge 1950 with 2x 140Gb Hard drives in a RAID 1 configuration. The OS is Windows 2003 Web Edition and disk is partitioned into to two, a 12Gb C: partition and the remainder is the D: drive. Both are very close to full capacity. Ideally I want to replace those drives with 2x 1Tb drives while retaining all data. First of all is this possible without rebuilding the server? If so, will I need any 3rd party software, Symantec Ghost, Partition Master for e.g., to do this? Any general advice as to how to go about doing this?

  Read the article

• "HDA audio bus driver is required and not found" on Dell Optiplex

  - by user1666698

  I have Dell Optiplex 745 with Windows 7 installed on it. I'm trying to use the Windows XP audio driver as Windows 7 drivers aren't available for Optiplex 745 and Windows Vista driver is displaying that it's not compatible with my hardware. When I try to install the Windows XP audio driver, it's displaying an error HDA audio bus driver is required and not found The installation fails then. I have researched thourghly and used many drivers but my audio is not working at all. I was also told that it might be a problem with my hardware – that is, a problem with the board.

  Read the article

• Dell XT on Windows 7 never recovers from sleep

  - by user39408

  My Dell XT, after upgrade to windows 7 ultimate seems to never recover from a sleep i.e. opening the lid shows a flicker, and then all lights go off. When I press the power button long enough it reboots and says that Windows had a serious error, blah blah (but no BSOD). Hibernate doesnt cause any problem, and that is what I am doing as default. Any idea how to debug more and fix it. Looked around (on web) for answer, tried related solutions (hotfixes for similar but not same problems) etc, but noting fixes this.

  Read the article

• Dell Inspiron 530 - SSD Worth it?

  - by DrFredEdison

  I'm going to be upgrading my Dell Inspiron 530 (2.0 Ghz Intel Dual Core CPU, 3 GB RAM) to windows 7 soon, and rather than backup and reformat my existing drive, I'm planning on getting a 2nd drive to replace my current primary, and moving it to a secondary. Thus, this seems like an excellent time to get a solid-state drive, if its going to be worth it. As far as I can tell this machine has a SATA-I controller, and I'm unsure if I'll see a noticeable performance increase with an SSD without going to SATA-II. So I have a three part question here given all that: Will spending the money on a SSD be worth it if hook it into a SATA-I controller? Is it reasonable to upgrade the controller on this machine to a SATA-II controller? Given that this PC is kind of old to begin with, am I better off performance wise to just stick with a faster HDD?

  Read the article

• DELL U2410 Monitor(Display Port) & Graphic card

  - by Anj

  I was looking for a 24" monitor and bought the Dell 24" inch ultra sharp monitor which has DisplayPort( new keyword for me) seems it is equivalent to HDMI. Now I would like to enhance the display capabilities for my laptop and desktop(both have VGA output as of now). Couple of questions in mind: Is there a single HD graphic card which i could use for both desktop and laptop? I understand it has to be external but if its costly then I would stick on internal graphic card for my desktop. Please recommend external if its cost effective else I would go for internal one(Budget is around $70 or Rs 4000. Is there a HD card which I could use for both HD video and 5.1 channel audio output? I generally use the computer for office work/ listening music and watching movies, not gaming.

  Read the article

• Dell monitors keep blank after initial start

  - by offler

  We have Dell T1650 PCs with 2 nVidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectedly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• dell E6500 laptop will not hibernate/standby

  - by Mark Schultheiss

  I am using a Dell E6500 laptop with windows XP on it, it was originally tagged/installed with Windows Vista. My issue is, when I close the lid, it will not either Hibernate or Standby. If I close the lid with either of these options, I then have to startup from scratch, and anything I had open is not open. I just want to close the lid, have it keep what I have running, not use power util I open the lid again and start it up (with the stuff still open I had open of course). Suggestions?

  Read the article

• Cannot log in to the desktop on ubuntu 11.10?

  - by Jichao

  The problem is, I could log in under the terminal, i could ifup eth0, i could do anything I want in the terminal, but if I use ctrl+alt+f7 goto the gnome login screen, after I input the correct password, the system just send me back to same login screen again. I have created a new user, but it didn't work. I have change all the files under ~/ to jichao:jichao(which is my username) with chown -hR jichao:jichao /home/jichao, but it didn't work too. I searched the internet, somebody said I should see the logs under /var/log/gdm, but there is not a /var/log/gdm directory in my box. Here are the tail of files under /var/log/ tail X.org.log [ 3263.348] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so [ 3263.348] (**) Dell Dell USB Keyboard: always reports core events [ 3263.348] (**) Dell Dell USB Keyboard: Device: "/dev/input/event5" [ 3263.348] (--) Dell Dell USB Keyboard: Found keys [ 3263.348] (II) Dell Dell USB Keyboard: Configuring as keyboard [ 3263.348] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29/event5" [ 3263.348] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard" (type: KEYBOARD) [ 3263.348] (**) Option "xkb_rules" "evdev" [ 3263.348] (**) Option "xkb_model" "pc105" [ 3263.348] (**) Option "xkb_layout" "us" kern.log Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701247] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input27 Mar 20 09:32:58 jichao-MS-730 kernel: [ 3182.701392] generic-usb 0003:413C:2003.0018: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.642572] usb 2-1.3: new low speed USB device number 17 using ehci_hcd Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.741892] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input28 Mar 20 09:33:02 jichao-MS-730 kernel: [ 3186.742080] generic-usb 0003:045E:0047.0019: input,hidraw2: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-1.3/input0 syslog Mar 20 09:33:02 jichao-MS-730 mtp-probe: bus: 2, device: 17 was not an MTP device Mar 20 09:33:27 jichao-MS-730 kernel: [ 3212.473901] usb 2-1.3: USB disconnect, device number 17 Mar 20 09:33:28 jichao-MS-730 kernel: [ 3212.702031] usb 2-1.4: USB disconnect, device number 16 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.022655] usb 2-1.4: new low speed USB device number 18 using ehci_hcd Mar 20 09:34:08 jichao-MS-730 mtp-probe: checking bus 2, device 18: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4" Mar 20 09:34:08 jichao-MS-730 mtp-probe: bus: 2, device: 18 was not an MTP device Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124278] input: Dell Dell USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.4/2-1.4:1.0/input/input29 Mar 20 09:34:08 jichao-MS-730 kernel: [ 3253.124423] generic-usb 0003:413C:2003.001A: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-1.4/input0 auth.log Mar 20 09:18:52 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:18:53 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:18:53 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.240" (uid=104 pid=6457 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") Mar 20 09:19:38 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jicha Mar 20 09:19:39 jichao-MS-730 sudo: jichao : TTY=tty6 ; PWD=/home ; USER=root ; COMMAND=/bin/chown -hR jichao:jichao jichao Mar 20 09:20:10 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session closed for user lightdm Mar 20 09:20:11 jichao-MS-730 lightdm: pam_unix(lightdm-autologin:session): session opened for user lightdm by (uid=0) Mar 20 09:20:11 jichao-MS-730 lightdm: pam_ck_connector(lightdm-autologin:session): nox11 mode, ignoring PAM_TTY :0 Mar 20 09:20:12 jichao-MS-730 lightdm: pam_succeed_if(lightdm:auth): requirement "user ingroup nopasswdlogin" not met by user "jichao" Mar 20 09:20:12 jichao-MS-730 dbus[835]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.247" (uid=104 pid=6572 comm="/usr/lib/indicator-datetime/indicator-datetime-ser") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.11" (uid=0 pid=1156 comm="/usr/sbin/console-kit-daemon --no-daemon ") It seems that my .xsession-errors does not grow since yesterday. Here is my .xsession-error: (gnome-settings-daemon:1550): Gdk-WARNING **: The program 'gnome-settings-daemon' received an X Window System error. This probably reflects a bug in the program. The error was 'BadWindow (invalid Window parameter)'. (Details: serial 26702 error_code 3 request_code 2 minor_code 0) (Note to programmers: normally, X errors are reported asynchronously; that is, you will receive the error a while after causing it. To debug your program, run it with the --sync command line option to change this behavior. You can then get a meaningful backtrace from your debugger if you break on the gdk_x_error() function.) (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed (nautilus:3106): GLib-GObject-CRITICAL **: g_value_get_object: assertion `G_VALUE_HOLDS_OBJECT (value)' failed WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist WARN 2012-03-17 19:28:46 glib <unknown>:0 Unable to fetch children: Method "Children" with signature "" on interface "org.ayatana.bamf.view" doesn't exist (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (yunio:2430): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, (polkit-gnome-authentication-agent-1:1601): Gtk-WARNING **: ??????????????:“pixmap”, /usr/share/system-config-printer/applet.py:336: GtkWarning: ??????????????:“pixmap”, self.loop.run () (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, (unity-window-decorator:1652): Gtk-WARNING **: ??????????????:“pixmap”, common-plugin-Message: checking whether we have a device for 4: yes common-plugin-Message: checking whether we have a device for 5: yes common-plugin-Message: checking whether we have a device for 6: yes common-plugin-Message: checking whether we have a device for 7: yes common-plugin-Message: checking whether we have a device for 10: yes common-plugin-Message: checking whether we have a device for 8: yes common-plugin-Message: checking whether we have a device for 9: yes (gnome-settings-daemon:13791): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed [1331983727,000,xklavier.c:xkl_engine_start_listen/] The backend does not require manual layout management - but it is provided by the application ** (gnome-fallback-mount-helper:1584): DEBUG: ConsoleKit session is active 0 (gnome-fallback-mount-helper:1584): Gdk-WARNING **: gnome-fallback-mount-helper: Fatal IO error 11 (???????) on X server :0. (gdu-notification-daemon:1708): Gdk-WARNING **: gdu-notification-daemon: Fatal IO error 11 (???????) on X server :0. unity-window-decorator: Fatal IO error 11 (???????) on X server :0.0. (bluetooth-applet:1583): Gdk-WARNING **: bluetooth-applet: Fatal IO error 11 (???????) on X server :0. (nm-applet:1596): Gdk-WARNING **: nm-applet: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): IBUS-WARNING **: _connection_closed_cb: Underlying GIOStream returned 0 bytes on an async read (update-notifier:1821): Gdk-WARNING **: update-notifier: Fatal IO error 11 (???????) on X server :0. applet.py: Fatal IO error 11 (???????) on X server :0. (nautilus:3106): Gdk-WARNING **: nautilus: Fatal IO error 11 (???????) on X server :0. Could you help me, Thanks.

  Read the article

• Add kilometers to a map point

  - by proveyourselfthom

  Good morning. I would like to know how do I add kilometers to a map point (latitude / longitude). For example: The city Jaraguá do Sul is in latitude -26.462049, longitude -49.059448. I want to add 100 kilometers up, down, and on the sides. I want to do a square and get the new points. How do I do that? I tried it: <?php $distance = 100; $earthRadius = 6371; $lat1 = -26.4853239150483; $lon1 = -49.075927734375; $bearing = 0; $lat2 = asin(sin($lat1) * cos($distance / $earthRadius) + cos($lat1) * sin($distance / $earthRadius) * cos($bearing)); $lon2 = $lon1 + atan2(sin($bearing) * sin($distance / $earthRadius) * cos($lat1), cos($distance / $earthRadius) - sin($lat1) * sin($lat2)); echo 'LAT: ' . $lat2 . '<br >'; echo 'LNG: ' . $lon2; ?> But it's returning wrong cordinates. Thank you! Thank you very much.

  Read the article

• How to use MySQL geospatial extensions with spherical geometries

  - by Joshua

  Hi Everyone, I would like to store thousands of latitude/longitude points in a MySQL db. I was successful at setting up the tables and adding the data using the geospatial extensions where the column 'coord' is a Point(lat, lng). Problem: I want to quickly find the 'N' closest entries to latitude 'X' degrees and longitude 'Y' degrees. Since the Distance() function has not yet been implemented, I used GLength() function to calculate the distance between (X,Y) and each of the entries, sorting by ascending distance, and limiting to 'N' results. The problem is that this is not calculating shortest distance with spherical geometry. Which means if Y = 179.9 degrees, the list of closest entries will only include longitudes of starting at 179.9 and decreasing even though closer entries exist with longitudes increasing from -179.9. How does one typically handle the discontinuity in longitude when working with spherical geometries in databases? There has to be an easy solution to this, but I must just be searching for the wrong thing because I have not found anything helpful. Should I just forget the GLength() function and create my own function for calculating angular separation? If I do this, will it still be fast and take advantage of the geospatial extensions? Thanks! josh UPDATE: This is exactly what I am describing above. However, it is only for SQL Server. Apparently SQL Server has a Geometry and Geography datatypes. The geography does exactly what I need. Is there something similar in MySQL?

  Read the article

• Xenserver 5.5 doesn't see RAID volume

  - by Roy Chan

  Hi Gurus, I am trying to install Xenserver on a Dell precision 490 workstation. After booting into the install wizard and next-ed a few times, On the disk step, it only shows physical harddrive but not the RAID (RAID-10) volume that I set up on the Dell RAID. Is there a special option that I have to set on the boot? or do I need a special driver for this? Please Advise Thanks

  Read the article

• configuring a Fibre Channel switch

  - by lindenb

  Hi all, (I'm asking this for a friend and I'm don't know most of this technical stuff, so I'm sorry in advance if I'm not clear enough to describe the problem) Where can i find any information about how to configure a Fibre Channel switch ( QLocic , Mini GBic, QME2572 ) to make it communicate with a Dell R905 and a Dell M905 Blade Server ? Many thanks in advance Pierre

  Read the article

• RAM upgrade, what options are suitable?

  - by user55150

  I have a Dell GX520 optiplex model (mini tower), and I want to upgrade its RAM. I currently have 1GB RAM and I want to upgrade to 2GB. All I know about RAM is its capacity, and I've heard about speeds lately like 400mhz, 533mhz, 800mhz, 1333mhz. I want to know what are the differences among them and can my PC support all those types of speeds or not? And what is the most suitable one for my Dell PC, to avoid any problems or limitations.

  Read the article

• Problem with switch dell 6224

  - by Matias

  Hello, we just have upgraded the firmware of a dell 6224 power connect switch and it won't reload. These are the symptons: - I power up the switch having the serial cable connected to it and the switch outputs nothing. The configuration of the serial console is fine: 9600 bds, etc... In fact, before the upgrade, I was connected to the switch through the very same cable. - Reseting the switch with its reset pinhole does not reset the switch: the power and fan lights powers off while I keep pressed the pinhole, but the switch itself does not resets. - When I connect an UTP cable to one of the switches port, the green lights don't flash, but ''mii-tool eth0'' in my laptop shows there is link!! The only thing I see in the output, different from other upgrades I've done, is this line at the end: Erasing Boot Flash.....^^^^Done. Any help or idea will be more than welcome!! Thanks!! console#show version Image Descriptions image1 : image2 : Images currently available on Flash -------------------------------------------------------------------- unit image1 image2 current-active next-active 1 <none> 3.0.0.8 image2 image2 console#boot system image2 Activating image image2 .. console#update bootcode Update bootcode and reset (Y/N)? Updating boot code ... Extracting boot code from image... Erasing Boot Flash.....^^^^Done.

  Read the article

• Rebinding Keys on a Dell Keyboard

  - by Maarx

  I have a Dell Multimedia Keyboard, similar to this one: It has many non-standard keys, like the small circular ones across the top, and the "Multimedia" keys above INSERT/HOME/PAGE_UP. They can be rebound through simple registry entries. Some sample ones are included below: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey] [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\15] "ShellExecute"="C:\\Program Files (x86)\\Mozilla Firefox\\firefox.exe http://mail.google.com/mail/#inbox" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\16] "Association"=".cda" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\17] "ShellExecute"="C:\\Windows\\System32\\SnippingTool.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\18] "ShellExecute"="calc.exe" [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\AppKey\7] "Association"="http" I've rebound the "MAIL" key to, instead of booting Outlook, to booting Firefox directed at my G-Mail account. I've rebound the button that would normally open "MY COMPUTER" to instead boot the Windows 7 "Snipping Tool", something I find very useful. Now, I'm looking to do some other things that I don't already know how to do. Note that answering this question doesn't necessarily require any knowledge about the keyboard or rebinding the keys: I can add, for any given key, a "ShellExecute" entry, and it will simply execute the following command as if it was typed at a Command Prompt. (I'm aware I dumbed that down rather significantly, but bear with me. I'm not really a Windows guy myself.) I use the volume knob for it's intended purpose, to change volume. I would like to change, however, a different key, to "reset" the Windows volume level back to exactly 50%, or, as it refers to it, "50", on it's 0-100 scale. I'm looking for the "program" (what I would type at a command prompt? these are still just Sys32 programs in the PATH, aren't they?) that, I imagine, would take arguments, to change Sound/Volume settings under Windows 7. Perhaps, for clarification, something that might take the form "C: SetVolume -slevel 50" or something.

  Read the article

• Ruckus wireless AP and Dell PowerConnect configuration problems

  - by DanielJay

  We are working on trying to get some Ruckus Access Points to work correctly on our network. Currently our network is as follows: VLAN 10 - Servers VLAN 11 – Computers/DHCP VLAN 12 – Voice VLAN 13 – Guest We use Dell PowerConnect 6248P switches for our switches. Port settings are as follows: ZoneDirector 1100 is plugged into this port. Should be accessing the server VLAN and then allowing all other traffic. interface ethernet 1/g2 classofservice trust ip-dscp description 'Ruckus ZoneDirector 1100' switchport mode general switchport general pvid 10 switchport general allowed vlan add 10 switchport general allowed vlan add 11-13 tagged exit Access point is plugged into this port. The port has to be on VLAN 11 in order to get DHCP. interface ethernet 1/g16 classofservice trust ip-dscp description 'Ruckus - IT' switchport mode general switchport general pvid 11 switchport general allowed vlan add 10-12 switchport general allowed vlan add 13 tagged exit If we tag the traffic from the SSID as VLAN 11 data fails. If we leave the SSID tagged as 1 the data flows correctly. Are there problems with passing tagged traffic to untagged ports? We are looking to see what we can do to get the SSID tagged as 11 instead of 1. Any suggestions?

  Read the article

• Getting Dell E6320 with I7 to work with 3 monitors at 1920x1080p x 3

  - by MadBoy

  I want to buy Dell E6320 which comes with Intel Core I7-2620M (2.70GHz, 4MB cache, Dual Core) with Intel HD Graphics 3000. Laptop will come with docking station. I want to connect 3 monitors to that docking station so that working at home would give me some additional boost. Docking station will allow me to connect only 2 monitors so I'm looking at following other options: Matrox TRIPLEHEAD2GO DIGITAL Edition or TRIPLEHEAD2GO DP Edition. But reading Matrox Support Page intel GPU can't run the highest resolution with 3 monitors connected, it even gets worse since it seems monitors would have to be able to work at 50hz. Also I'm not sure but it seems that Matrox doesn't split the monitors as 3 separate monitors but simply as one big space (which is a bit opposite to what I need) Buy 2 or maybe just 1 USB based monitor but it would also mean having 1 or 2 different monitors then the main one, unless I buy 3 USB based monitors which would mean more money to spend. Also I found only couple of models and most of them require USB 3.0 and no other cables to plug in (nice but costly - couldn't find decent monitor with only USB for sending signal and having power connected normally) . But docking station has only one USB 3.0 port. Can I use hub and still get it to work? Find some converters from Digital to USB (I think DisplayLink does some?) Buy different laptop but what kind? I need it to be I7, small (13"), fast and lightweight. At same time it requires docking station that I can use at home to connect 3 external monitors. Some other suggested solution... Edit: I need 3 monitors for work in terms of coding in Visual Studio or having word/excel/outlook open. Nothing fancy. Maybe some movie once in a while.

  Read the article

• Dell PS/2 Keyboard Stops Working Randomly After Power Disturbance

  - by Kenneth Murphy

  I have a Dell PS/2 keyboard connected to a desktop PC running Slackware 12.2 & Windows XP. After a recent, brief power outage/disturbance at my home, the keyboard has begun to quit working at random times. It has stopped at POST, but not by keyboard error -- I have to press the F1 key to continue booting, and at times the keyboard has already stopped working. Other times, the keyboard will work perfectly for a long time (a day or more) before it finally quits. It has stopped at boot, in Windows XP, and in Slackware. The led lights continue to work regardless. I have tried another PS/2 keyboard and it seems to be immune to this problem. The USB mouse always works. Does anyone have any ideas about how this might have happened? If this is related to the power disturbance that killed the power to the running PC, is it feasible that it would have only fried the keyboard itself (which still works sometimes) and not the PS/2 port nor anything else? I have experienced no other problems since the event.

  Read the article

• Get points from a Gdirections route

  - by Twan

  Hi, I'm trying to get a collection of points (latitude,longitude) between 2 adresses. The points needs to be on a valid tracfic route. I currently use Gdirections to create a route between 2 adresses. Is there a method to get somepoints allong this route? To me it seems impossible... thx in advance!

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >