Search Results

Search found 3192 results on 128 pages for 'dell precision'.

Page 29/128 | < Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >

• Notebook computer battery says: plugged in but not charging with no further information. Is the bat

  - by Jian Lin

  My 1.5 year old Dell Studio 15 notebook computer has a battery and I keep it attached to the notebook but 98% of the time I just plug in the power adapter. Lately when I unplugged the power adapter, the battery was only good for 10 minutes, and a few days ago, when I unplugged the power adapter, the computer simply turned off. When clicking on the battery icon on Win 7, it says "Plugged in, not charging": is the battery dead? Or can Win 7 have any option to not charge the battery? It is a Dell Studio 15, I wonder if in such case, it looks like it can be a manufacture's defect, would Dell replace the battery? (if there was a recall, then they probably would, i think). The notebook is 1.5 year old.

  Read the article

• OEM Office 2010 without media - how to reinstall?

  - by Bryan

  I have recently purchased a new office desktop PC from Dell with OEM version of Windows 7 Pro and Office 2010 Pro. One of the reasons I always use Dell is that they always supply installation media CDs or DVDs, unlike some other companies that just give you ISO images on the hard disk that you have to burn yourself. This is the first PC I have purchased with Office 2010 Pro (OEM), and I was disappointed to see that Dell don't ship out any installation media for office 2010, they just supply a piece of card with the office pro product key printed on it. If the HDD fails completely and I have to perform a clean installation, how can I re-install office? Can I download the trial version of Office 2010 and install that, then offer it my product key? Bearing in mind that the product key is an OEM product, not a retail product, would this work?

  Read the article

• 64 Bit Windows drivers for Inspiron 1720

  - by Rob Allen

  Dell doesn't seem to offer 64 bit drivers specifically for the Inspiron 1720 (laptop). I'm going to be upgrading from Vista 32-bit to Windows 7 64bit and I want to pull down the necessary stuff before hand. Are there any Dell systems that are similar enough to the Inspiron 1720 that I can use for a baseline to make sure I still have Ethernet and WiFi after the reinstall? It doesn't matter if they are for Vista 64 or Windows 7. Identified hardware: Processor: Intel mobile Core 2 Duo T7500 Chipset: Intel Mobile 965 Express Wifi: Intel Pro Wireless Drive Controller: Intel Matrix Graphics: nVidia GeForce 8600M GT Bluetooth: Dell TrueMobile 355 + EDR Ricoh card reader I think anything else, the default Windows drivers will be sufficient. Let me know if you think I missed something thing please.

  Read the article

• Please help to troubleshoot the issue with Inspiron 8600 laptop

  - by user34300

  Hello! I have a Dell Inspiron 8600 laptop which display stopped working all of the sudden. It started to show a purple fog pattern along with some color vertical lines. I talked to Dell support and they told me that is a screen gone bad and I should get a new one which I did. But surprisingly the new display won't work either! The pattern on the screen is different but still no picture. So I tried to connect the old display to another laptop (Lenovo Z61) and it turns out it works just fine with it! So please help me to identify the cause of the issue. I think it could be a video card but the external display works flawlessly. I appreciate your thoughts about it so I won't need to buy spares which I don't need. Thank you! P.S. Please do not suggest to contact Dell support again.

  Read the article

• PC3200 RAM in Older Computer?

  - by skaz

  Hello all, I am inheriting a Dell Dimension 8200, but it needs RAM to get up and running. I have PC3200 sticks lying around, but I am not sure how to go about figuring out if the RAM is compatible, as RAM has always confused me. Here is the Dell Dimension 8200 Tech Specs: http://support.dell.com/support/edocs/systems/dim8200/specs.htm For RAM, it says: Memory type PC800 (non-ECC) I don't know if that is just the kind that comes with it, and I can put in PC3200 (I think, if it worked, this would run at the lower rating? Is that true?), or if that means only PC800 is compatible. Any help would be appreciated.

  Read the article

• Fedora error log file

  - by user111196

  I am running a java application using this wrapper service yajsw. The problem it just stopped without any error in its logs file. So I was wondering will there be any system log file which will indicate the cause of it going down? Partial of the log file. Apr 6 00:12:20 localhost kernel: imklog 3.22.1, log source = /proc/kmsg started. Apr 6 00:12:20 localhost rsyslogd: [origin software="rsyslogd" swVersion="3.22.1" x-pid="2234" x-info="http://www.rsyslog.com"] (re)start Apr 6 00:12:20 localhost kernel: Initializing cgroup subsys cpuset Apr 6 00:12:20 localhost kernel: Initializing cgroup subsys cpu Apr 6 00:12:20 localhost kernel: Linux version 2.6.27.41-170.2.117.fc10.x86_64 ([email protected]) (gcc version 4.3.2 20081105 (Red Hat 4.3.2-7) (GCC) ) #1 SMP Thu Dec 10 10:36:29 EST 2009 Apr 6 00:12:20 localhost kernel: Command line: ro root=UUID=722ebf87-437f-4634-9c68-a82d157fa948 rhgb quiet Apr 6 00:12:20 localhost kernel: KERNEL supported cpus: Apr 6 00:12:20 localhost kernel: Intel GenuineIntel Apr 6 00:12:20 localhost kernel: AMD AuthenticAMD Apr 6 00:12:20 localhost kernel: Centaur CentaurHauls Apr 6 00:12:20 localhost kernel: BIOS-provided physical RAM map: Apr 6 00:12:20 localhost kernel: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) Apr 6 00:12:20 localhost kernel: BIOS-e820: 0000000000100000 - 00000000cfb50000 (usable) Apr 6 00:12:20 localhost kernel: BIOS-e820: 00000000cfb50000 - 00000000cfb66000 (reserved) Apr 6 00:12:20 localhost kernel: BIOS-e820: 00000000cfb66000 - 00000000cfb85c00 (ACPI data) Apr 6 00:12:20 localhost kernel: BIOS-e820: 00000000cfb85c00 - 00000000d0000000 (reserved) Apr 6 00:12:20 localhost kernel: BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) Apr 6 00:12:20 localhost kernel: BIOS-e820: 00000000fe000000 - 0000000100000000 (reserved) Apr 6 00:12:20 localhost kernel: BIOS-e820: 0000000100000000 - 0000000330000000 (usable) Apr 6 00:12:20 localhost kernel: DMI 2.5 present. Apr 6 00:12:20 localhost kernel: last_pfn = 0x330000 max_arch_pfn = 0x3ffffffff Apr 6 00:12:20 localhost kernel: x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 Apr 6 00:12:20 localhost kernel: last_pfn = 0xcfb50 max_arch_pfn = 0x3ffffffff Apr 6 00:12:20 localhost kernel: init_memory_mapping Apr 6 00:12:20 localhost kernel: last_map_addr: cfb50000 end: cfb50000 Apr 6 00:12:20 localhost kernel: init_memory_mapping Apr 6 00:12:20 localhost kernel: last_map_addr: 330000000 end: 330000000 Apr 6 00:12:20 localhost kernel: RAMDISK: 37bfc000 - 37fef6c8 Apr 6 00:12:20 localhost kernel: ACPI: RSDP 000F21B0, 0024 (r2 DELL ) Apr 6 00:12:20 localhost kernel: ACPI: XSDT 000F224C, 0084 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: FACP CFB83524, 00F4 (r3 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: DSDT CFB66000, 4974 (r1 DELL PE_SC3 1 INTL 20050624) Apr 6 00:12:20 localhost kernel: ACPI: FACS CFB85C00, 0040 Apr 6 00:12:20 localhost kernel: ACPI: APIC CFB83078, 00B6 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: SPCR CFB83130, 0050 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: HPET CFB83184, 0038 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: MCFG CFB831C0, 003C (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: WD__ CFB83200, 0134 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: SLIC CFB83338, 0176 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: ERST CFB6AAF4, 0210 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: HEST CFB6AD04, 027C (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: BERT CFB6A974, 0030 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: EINJ CFB6A9A4, 0150 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: ACPI: TCPA CFB834BC, 0064 (r1 DELL PE_SC3 1 DELL 1) Apr 6 00:12:20 localhost kernel: No NUMA configuration found Apr 6 00:12:20 localhost kernel: Faking a node at 0000000000000000-0000000330000000 Apr 6 00:12:20 localhost kernel: Bootmem setup node 0 0000000000000000-0000000330000000 Apr 6 00:12:20 localhost kernel: NODE_DATA [0000000000015000 - 0000000000029fff] Apr 6 00:12:20 localhost kernel: bootmap [000000000002a000 - 000000000008ffff] pages 66 Apr 6 00:12:20 localhost kernel: (7 early reservations) ==> bootmem [0000000000 - 0330000000] Apr 6 00:12:20 localhost kernel: #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] Apr 6 00:12:20 localhost kernel: #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000] Apr 6 00:12:20 localhost kernel: #2 [0000200000 - 0000a310cc] TEXT DATA BSS ==> [0000200000 - 0000a310cc] Apr 6 00:12:20 localhost kernel: #3 [0037bfc000 - 0037fef6c8] RAMDISK ==> [0037bfc000 - 0037fef6c8] Apr 6 00:12:20 localhost kernel: #4 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] Apr 6 00:12:20 localhost kernel: #5 [0000008000 - 000000c000] PGTABLE ==> [0000008000 - 000000c000] Apr 6 00:12:20 localhost kernel: #6 [000000c000 - 0000015000] PGTABLE ==> [000000c000 - 0000015000] Apr 6 00:12:20 localhost kernel: found SMP MP-table at [ffff8800000fe710] 000fe710 Apr 6 00:12:20 localhost kernel: Zone PFN ranges: Apr 6 00:12:20 localhost kernel: DMA 0x00000000 -> 0x00001000 Apr 6 00:12:20 localhost kernel: DMA32 0x00001000 -> 0x00100000 Apr 6 00:12:20 localhost kernel: Normal 0x00100000 -> 0x00330000 Apr 6 00:12:20 localhost kernel: Movable zone start PFN for each node Apr 6 00:12:20 localhost kernel: early_node_map[3] active PFN ranges Apr 6 00:12:20 localhost kernel: 0: 0x00000000 -> 0x000000a0 Apr 6 00:12:20 localhost kernel: 0: 0x00000100 -> 0x000cfb50 Apr 6 00:12:20 localhost kernel: 0: 0x00100000 -> 0x00330000 Apr 6 00:12:20 localhost kernel: ACPI: PM-Timer IO Port: 0x808 Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled) Apr 6 00:12:20 localhost kernel: ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1]) Apr 6 00:12:20 localhost kernel: ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) Apr 6 00:12:20 localhost kernel: IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 Apr 6 00:12:20 localhost kernel: ACPI: IOAPIC (id[0x09] address[0xfec81000] gsi_base[64]) Apr 6 00:12:20 localhost kernel: IOAPIC[1]: apic_id 9, version 0, address 0xfec81000, GSI 64-87 Apr 6 00:12:20 localhost kernel: ACPI: IOAPIC (id[0x0a] address[0xfec84000] gsi_base[160]) Apr 6 00:12:20 localhost kernel: IOAPIC[2]: apic_id 10, version 0, address 0xfec84000, GSI 160-183 Apr 6 00:12:20 localhost kernel: ACPI: IOAPIC (id[0x0b] address[0xfec84800] gsi_base[224]) Apr 6 00:12:20 localhost kernel: IOAPIC[3]: apic_id 11, version 0, address 0xfec84800, GSI 224-247 Apr 6 00:12:20 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) Apr 6 00:12:20 localhost kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Apr 6 00:12:20 localhost kernel: Setting APIC routing to flat Apr 6 00:12:20 localhost kernel: ACPI: HPET id: 0x8086a201 base: 0xfed00000 Apr 6 00:12:20 localhost kernel: Using ACPI (MADT) for SMP configuration information Apr 6 00:12:20 localhost kernel: SMP: Allowing 8 CPUs, 0 hotplug CPUs Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000000a0000 - 0000000000100000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000cfb50000 - 00000000cfb66000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000cfb66000 - 00000000cfb85000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000cfb85000 - 00000000cfb86000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000cfb86000 - 00000000d0000000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000f0000000 - 00000000fe000000 Apr 6 00:12:20 localhost kernel: PM: Registered nosave memory: 00000000fe000000 - 0000000100000000 Apr 6 00:12:20 localhost kernel: Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) Apr 6 00:12:20 localhost kernel: PERCPU: Allocating 65184 bytes of per cpu data Apr 6 00:12:20 localhost kernel: Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096524 Apr 6 00:12:20 localhost kernel: Policy zone: Normal Apr 6 00:12:20 localhost kernel: Kernel command line: ro root=UUID=722ebf87-437f-4634-9c68-a82d157fa948 rhgb quiet Apr 6 00:12:20 localhost kernel: Initializing CPU#0 Apr 6 00:12:20 localhost kernel: PID hash table entries: 4096 (order: 12, 32768 bytes) Apr 6 00:12:20 localhost kernel: Extended CMOS year: 2000 Apr 6 00:12:20 localhost kernel: TSC: PIT calibration confirmed by PMTIMER. Apr 6 00:12:20 localhost kernel: TSC: using PMTIMER calibration value Apr 6 00:12:20 localhost kernel: Detected 1994.992 MHz processor. Apr 6 00:12:20 localhost kernel: Console: colour VGA+ 80x25 Apr 6 00:12:20 localhost kernel: console [tty0] enabled Apr 6 00:12:20 localhost kernel: Checking aperture... Apr 6 00:12:20 localhost kernel: No AGP bridge found Apr 6 00:12:20 localhost kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Apr 6 00:12:20 localhost kernel: Placing software IO TLB between 0x20000000 - 0x24000000 Apr 6 00:12:20 localhost kernel: Memory: 12324244k/13369344k available (3311k kernel code, 253484k reserved, 1844k data, 1296k init) Apr 6 00:12:20 localhost kernel: SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Apr 6 00:12:20 localhost kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 3989.98 BogoMIPS (lpj=1994992) Apr 6 00:12:20 localhost kernel: Security Framework initialized Apr 6 00:12:20 localhost kernel: SELinux: Initializing. Apr 6 00:12:20 localhost kernel: Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) Apr 6 00:12:20 localhost kernel: Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) Apr 6 00:12:20 localhost kernel: Mount-cache hash table entries: 256 Apr 6 00:12:20 localhost kernel: Initializing cgroup subsys ns Apr 6 00:12:20 localhost kernel: Initializing cgroup subsys cpuacct Apr 6 00:12:20 localhost kernel: Initializing cgroup subsys devices Apr 6 00:12:20 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Apr 6 00:12:20 localhost kernel: CPU: L2 cache: 4096K Apr 6 00:12:20 localhost kernel: CPU 0/0 -> Node 0 Apr 6 00:12:20 localhost kernel: CPU: Physical Processor ID: 0 Apr 6 00:12:20 localhost kernel: CPU: Processor Core ID: 0 Apr 6 00:12:20 localhost kernel: CPU0: Thermal monitoring enabled (TM1) Apr 6 00:12:20 localhost kernel: using mwait in idle threads. Apr 6 00:12:20 localhost kernel: ACPI: Core revision 20080609 Apr 6 00:12:20 localhost kernel: ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 Apr 6 00:12:20 localhost kernel: CPU0: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07 Apr 6 00:12:20 localhost kernel: Using local APIC timer interrupts. Apr 6 00:12:20 localhost kernel: Detected 20.781 MHz APIC timer. Apr 6 00:12:20 localhost kernel: Booting processor 1/4 ip 6000 Apr 6 00:12:20 localhost kernel: Initializing CPU#1 Apr 6 00:12:20 localhost kernel: Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=1995026) Apr 6 00:12:20 localhost kernel: CPU: L1 I cache: 32K, L1 D cache: 32K Apr 6 00:12:20 localhost kernel: CPU: L2 cache: 4096K Apr 6 00:12:20 localhost kernel: CPU 1/4 -> Node 0 Apr 6 00:12:20 localhost kernel: CPU: Physical Processor ID: 1 Apr 6 00:12:20 localhost kernel: CPU: Processor Core ID: 0 Apr 6 00:12:20 localhost kernel: CPU1: Thermal monitoring enabled (TM2) Apr 6 00:12:20 localhost kernel: x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 Apr 6 00:12:20 localhost kernel: CPU1: Intel(R) Xeon(R) CPU E5335 @ 2.00GHz stepping 07 Apr 6 00:12:20 localhost kernel: checking TSC synchronization [CPU#0 -> CPU#1]: passed. Apr 6 00:12:20 localhost kernel: Booting processor 2/2 ip 6000 Apr 6 00:12:20 localhost kernel: Initializing CPU#2 Apr 6 00:12:20 localhost kernel: Calibrating delay using timer specific routine.. 3990.05 BogoMIPS (lpj=1995029)

  Read the article

• trying to setup wireless

  - by JohnMerlino

  I'm trying to set up wireless on vostro 1520 dell laptop, with latest Ubuntu install. Here's the output of some of the commands that I was told to run: lshw -C network viggy@ubuntu:~$ lshw -C network WARNING: you should run this program as super-user. *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:08:00.0 logical name: eth0 version: 03 serial: 00:24:e8:da:84:25 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168d-1.fw ip=192.168.2.6 latency=0 multicast=yes port=MII speed=100Mbit/s resources: irq:47 ioport:3000(size=256) memory:f6004000-f6004fff memory:f6000000-f6003fff memory:f6020000-f603ffff *-network description: Network controller product: BCM4312 802.11b/g LP-PHY vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:0e:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: bus_master cap_list configuration: driver=b43-pci-bridge latency=0 resources: irq:18 memory:fa000000-fa003fff *-network DISABLED description: Wireless interface physical id: 1 logical name: wlan0 serial: 0c:60:76:05:ee:74 capabilities: ethernet physical wireless configuration: broadcast=yes driver=b43 driverversion=3.2.0-29-generic firmware=N/A multicast=yes wireless=IEEE 802.11bg lspci 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07) 00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03) 00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03) 00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03) 00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) 00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) 00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03) 00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03) 00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 03) 00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 03) 00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 03) 00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03) 00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03) 00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03) 00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03) 00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) 00:1f.0 ISA bridge: Intel Corporation ICH9M LPC Interface Controller (rev 03) 00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03) 00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03) 0e:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 1a:00.0 FireWire (IEEE 1394): O2 Micro, Inc. Device 10f7 (rev 01) 1a:00.1 SD Host controller: O2 Micro, Inc. Device 8120 (rev 01) 1a:00.2 Mass storage controller: O2 Micro, Inc. Device 8130 (rev 01) iwconfig lo no wireless extensions. wlan0 IEEE 802.11bg ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=0 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on eth0 no wireless extensions. At this point in time, I don't have wireless.

  Read the article

• FreeNas on Dell Powervault 745N: 2TB Limit?

  - by willoller

  I want to purchase 2 x 2TB drives, and install FreeNas on my Dell Powervault 745N. People on the internets seem to be having trouble with the MD3000 firmware, and I want to make sure I can solve any issues before buying the drives. Before I invest, I have 3 questions : Is there a partition size limit determined by the RAID controller? That is, could I have a striped 4TB partition? The spec sheets make me wonder if the RAID controller needs all 4 drives in order to work. Is there any reason this will have to run in RAID5? If I buy 4 matching drives, would the controller support a RAID6 configuration? I'm basically new to all this RAID stuff - sorry for any noob questions.

  Read the article

• Upgrading a PERC h310 to a PERC H710 mini RAID controller on a Dell R620

  - by Gregg Leventhal

  I have an ESXi 5.0 Free license host using an internal Datastore (RAID 5, 5 Disk) that was configured with a Dell PERC h310 RAID controller. The disk performance was very poor, so I upgraded to the PERC H710 Mini. The IT Tech installed the controller and powered the host back on. I had to rescan the controller and the datastore appeared. Should any settings be changed in the RAID BIOS, or should the default settings be sufficient? Is they anything to be aware of when performing this type of upgrade in order to achieve the maximum performance?

  Read the article

• Connecting Dell PowerVault NAS to ESXi

  - by Matt Fitz

  Just got a Dell PowerVault NAS storage device running Windows Storage Server Standard which includes NFS. When I try and connect the ESXi server I get the following message: Call "HostDatastoreSystem.CreateNasDatastore" for object "ha-datastoresystem" on ESXi "powerhouse" failed. Operation failed, diagnostics report: Unable to complete Sysinfo operation. Please see the VMkernel log file for more details. I am pretty sure it is a username/password type thing. Not sure were to begin though. Also, I am planning on using "Username Mapping" instead of Active Directory. Any ideas would be greatly appreciated

  Read the article

• Reconfigure RAID on Dell PowerEdge T710

  - by Stefano Borini

  I have a Dell PowerEdge T710 under my feet at this very moment, with RedHat Enterprise Server 5.3. I have 6 1TB disks and two 500GB. parted reports two devices, one 500 GB and the other 4 TB. So I assume the RAID has been setup as mirror for two disks, and I assume as RAID 5 the remaining ones. I say "I assume" because it does not make sense. Having 6 disks in RAID 5, I should obtain a total space of 5 TB, not 4TB. It's not even RAID 10: I would end up with a 3 TB unit. How can I check and eventually modify the RAID array definition? In the Fujitsu Siemens I played with some time ago, at boot I had the chance to enter the controller BIOS, but here I don't see a clear way to perform this operation.

  Read the article

• powerpoint make computer shut down on dell optiplex 760

  - by yael

  hello, At my office we upgraded group of computers to windows 7 + office 2010, few of us have problem that when we work on powerpoint - once in a while the computer suddenly shut down (with out any message). Some of us - has no such problems. We checked and fount that the people who experience problems - use Dell Optiplex 760 PC, and everyone that have no problems use other models. We also found out that the processors of the 760's are not the same - some are Intel E7400 and one is Intel E8400, so I suspect that maybe the mother board is the problem Does any one no this problem? Does any one have an idea about it? Any help will be appreciated. Thanks, Yael

  Read the article

• Reset DRAC/MC password on Dell BladeCentre 1855

  - by Farseeker

  I have a Dell Blade Centre 1855, and nobody knows what the root password for the DRAC/MC card in the blade chassis is (I tried root/calvin). I do not have IP access to the DRAC/MC, nor do I have physical access to the back of the blade centre to access the DRAC/MC module. I do have serial access (and can see the login prompt in hyperterm). I do have physical access to the FRONT of the chassis (the back of the cabinet is locked and lo-and-behold the key cannot be found). Does anyone know how to reset the password? Every piece of literature I find on the internet tells me I need to log in, or run racadm on the host machine (which I can't, because it's inside a blade chassis). If someone does know how to do it with physical access to the back of the bladecentre, please post it anyway, as I'm sure I'll get access to the back of the cabinet one day)

  Read the article

• Remote RAID Control ESXi Dell PowerEdge 2950 OpenManage

  - by yoyomommy

  I was wondering how one can add a drive into an existing RAID array while ESXi is still running. I have read that you are able to use Dell OpenManage to do this. I have installed OMSA 7.0 on the VMWare ESXi host (5.0 and fully updated) and I've installed OpenManage Essentials on a Windows Server 2008 R2 guest. The issue that I'm having is that OpenManage is unable to see my RAID controller. I have seen videos and photos as parts of guides on how to do this online, so I would assume that the functionality exists and I just have it set up wrong.

  Read the article

• IMAP/POP won't send allow emails to outside- New Dell PowerEdge 7310 running SBS 2011

  - by user779887

  I have a brand new out of the box Dell PowerEdge T310 running SBS 2011. Our employees at our remote offices can't send emails to recipients outside of our own domain. The workstations at the same location as the server aren't having any problem. I would at this time like to say "Thanks a lot" to the super-minds at Microsoft for protecting our email server from rogue computers attempting to send fake emails. (Silly me I thought proper login and password conventions would handle that.) I know this is something dealing with relaying but thus far nothing from any posts I've read have changed anything. Honestly, if someone is crafty enough to guess one of our login/password combos, let them send emails through our server I don't care!

  Read the article

• dell E6500 laptop will not hibernate/standby

  - by Mark Schultheiss

  I am using a Dell E6500 laptop with windows XP on it, it was originally tagged/installed with Windows Vista. My issue is, when I close the lid, it will not either Hibernate or Standby. If I close the lid with either of these options, I then have to startup from scratch, and anything I had open is not open. I just want to close the lid, have it keep what I have running, not use power util I open the lid again and start it up (with the stuff still open I had open of course). Suggestions?

  Read the article

• DELL switch 6248 port and mac mapping using SNMP

  - by Brad

  I have a Dell 6248 switch. I connect some of my servers to it and want to know which server nic connected to which switch port. I try using snmpwalk to get this information, but I just can get mac/ip mapping of my server nic from switch, I still can't get which switch port it connect. I try a tool named Managed Switch Port Mapping tool, it can show which switch port is connected to which nic/ip. I use WireShare to get all snmp packets but still can't find what's the snmp oid to get this information. Anyone knows how to get this?

  Read the article

• powerpoint make computer shut down on dell optiplex 760

  - by yael

  At my office we upgraded group of computers to windows 7 + office 2010, few of us have problem that when we work on powerpoint - once in a while the computer suddenly shut down (with out any message). Some of us - has no such problems. We checked and fount that the people who experience problems - use Dell Optiplex 760 PC, and everyone that have no problems use other models. We also found out that the processors of the 760's are not the same - some are Intel E7400 and one is Intel E8400, so I suspect that maybe the mother board is the problem Does any one no this problem? Does any one have an idea about it? Any help will be appreciated. Thanks, Yael

  Read the article

• Dell XPS 420: Turning computer on, video ports showing static

  - by Roy Rico

  I have a Dell XPS 420 which i recently upgraded with a EVGA GTX 550TI and a 80GB SSD Drive. I converted this machine into a home theater PC. Which I've always had on. The computer wasn't responding, and so i restarted it and when it started, video ports showing static. I was getting static on my TV thru both DVI ports and the mini HDMI port. I assumed my video card had gone bad, but i completely replaced it and still the same behavior is occurring. I do not know how to diagnosis this issue. Any thoughts?

  Read the article

• Dell D620 Windows 7 Blank screen

  - by Dave Arkell

  When I installed Windows 7 on my Dell D620 it was all fine until a couple of days later most times when I either shut down or suspend (by closing the lid). When I unsuspend or startup the computer, there is often a completely blank screen (can't see post screen or anything), and restarting doesn't help. I've found that I can eventually bring it back up again by suspending and unsuspending a few times, but obviously this is not ideal. Has anyone else experienced this? I think it is a driver issue, that somehow the driver is putting the video card into a certain mode that it forgets how to get it back out of. Any ideas on a better solution than my switching off and on business? Edit: Turns out that the video card had burned out! IT managed to get me a new mainboard sorted for me.

  Read the article

• dell u2410 3dMark Benchmark distortion problems

  - by Scanningcrew

  Ive been doing burn in testing for a new system I have put together and I am running into some video distortion problems with running the 3DMark benchmark tools (Both 06 and Vantage). The graphics will be fine, then sometimes during a test switch the screen will light up with thin horizontal ranibow lines (Something that looks very "glitchy") If i turn the monitor off and back on it clears up. All the tests "pass" and my system gets good marks but it concerns me if I might have problems with games (The screen returns to normal if I dont resest monitor and just let tests pass). I want to return a problem component now before its too late if it is something with the new hardware. Also, I am monitoring temp with thermal laser gun and the card itself is not going above 65c. Any ideas? System: Asrock x58 Xtreme - Last BIOS (1.80) EVGA Geforce GTX 285 w/ latest nvidia drivers (Connect via DVI1) Dell U2410(Set to 59hz refresh 1900x1202 -although I believe benchmarks run 1200x1024) Windows 7 Ultimate 64 12Gb DDR3 1600 RAM

  Read the article

• External USB Fingerprint Reader for Pre-boot Authentication for Dell Laptop

  - by cop1152

  My company just purchased several Dell Latitude E6500 laptops with docking stations and external monitors. These laptops have a fingerprint scanner located next to the keyboard. DOCKED users who prefer to use the included fingerprint scanner for pre-boot authentication are forced to open their laptop in order to access the scanner. This is an inconvenience when the laptop is docked. We are looking for an external, usb fingerprint scanner, that will work with the current preboot authentication setup. I assume that this scanner would have to access the existing credentials for authentication....wherever they are stored. So we would require something that would work PRE-BOOT, use the existing credentials, and not interfere with usage when the machine was not docked, such as when the laptop is being used at home. Does anyone have experience with this scenario? Thanks.

  Read the article

• Ideas for home media server with Dell laptop?

  - by Warlax

  Hi guys, We have an old Dell Inspiron laptop we don't use anymore and would look to turn it onto a media/backup server for music/pictures - and maybe documents/code. The laptop only has 40Gb of HD space but we can hook to it a USB external HD with an additional 80Gb. This is a very general question: - What OS should I put on it (more like, what flavor of Linux)? - What media/backup server software should I install on top of that? - How would you go about backing up to it? I need to back up computers on the same LAN, some have Windows, some OS X, some Linux. If you could point me to an all-in-one solution with a nice tutorial for non-sysadmin folks it would be greatly appreciated, thank you!!!

  Read the article

• Optimal Memory Configuration for Dell PowerEdge 1800 (Windows Server 2000 32bit)

  - by David Murdoch

  I am upgrading the memory on a Dell PowerEdge 1800 Server running Windows Server 2000 (32 bit). My Computer Properties currently reports "2,096,432 KB RAM" (4 modules @ 512MB each). Crucial.com scan reports: "Each memory slot can hold DDR2 PC2-5300 with a maximum of 2GB per slot. Maximum Memory Capacity:  12288MB Currently Installed Memory:  2GB Available Memory Slots:  2 Total Memory Slots:  6 Dual Channel Support:   No CPU Manufacturer:  GenuineIntel CPU Family:  Intel(R) Xeon(TM) CPU 2.80GHz Model 4, Stepping 1 CPU Speed:  2793 MHz Installed in pairs of modules." We will be completely replacing the old 512 MB modules. Will there be any performance difference between installing 4 modules @ 1GB vs. 2 modules @ 2GB?

  Read the article

• IMAP/POP won't send allow emails to outside- New Dell PowerEdge T310 running SBS 2011

  - by user779887

  I have a brand new out of the box Dell PowerEdge T310 running SBS 2011. Our employees at our remote offices can't send emails to recipients outside of our own domain. The workstations at the same location as the server aren't having any problem. I would at this time like to say "Thanks a lot" to the super-minds at Microsoft for protecting our email server from rogue computers attempting to send fake emails. (Silly me I thought proper login and password conventions would handle that.) I know this is something dealing with relaying but thus far nothing from any posts I've read have changed anything. Honestly, if someone is crafty enough to guess one of our login/password combos, let them send emails through our server I don't care!

  Read the article

< Previous Page | 25 26 27 28 29 30 31 32 33 34 35 36  | Next Page >